Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ultrasound field" wg kryterium: Temat


Wyświetlanie 1-8 z 8
Tytuł:
Characterization of the organic fraction of pretreated leachate from old landfill after sonication exposure
Charakterystyka frakcji organicznej odcieków ze starego składowiska po zastosowaniu sonifikacji
Autorzy:
Kwarciak-Kozłowska, A.
Sławik-Dembiczak, L.
Powiązania:
https://bibliotekanauki.pl/articles/297739.pdf
Data publikacji:
2016
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
landfill leachate
IR spectra
ultrasound field
biodegradation
odcieki składowiskowe
spektroskopia IR
pole ultradźwiękowe
biodegradacja
Opis:
Collection of municipal waste in landfills, even properly designed and operated, is an important issue in environmental engineering. These are formed by the infiltration of rainfall through the waste bed and eluting with the organic and inorganic compounds, often toxic nature. So far, over 200, have been identified which are organic substances leachate contamination, as many as 35 belongs to the so-called “priority pollutants”. By the decrease in the concentration of organic compounds in the leachate decrease the value of biological and chemical oxygen demand which is dictated by stabilization of landfill as lengthening the time of its life. However, the indicator BOD5 decreases faster as compared to COD therefore BOD5/COD ratio is reduced to as low as 0.06. The leachate produced in mature landfills appears to be the presence of significant amounts of humic acid with very stable structure difficult to breach by bacteria. It was assumed that ultrasonic waves induce change in the structure of organic compounds and contribute to the acceleration of the biodegradability, among other substances in the effluents refractive thereby improve the efficiency of the biological purification processes. For sonification leachate used ultrasonic disintegrator type vibro goal Sonics (40 kHz). The range of vibration amplitude was varied in the range from 25 to 123 μm and exposure time (sonification of leachate) from 60 to 720 seconds. Also the measuring of the size of the energy produced during sonication sonochemical leachate was made. It was found, inter alia, that the sonification process of effluents clearly influenced the formation and release of aliphatic compounds. The –CH2 and –CH3 groups can be released from the humic compounds or aromatic combinations. It was also observed the formation of substantial amounts of compounds with the functional hydroxyl group, which might be derived from alcohols and carboxylic acids. These changes suggested a breach of the chemical structure of organic compounds contained in the leachate, so that, the chemical structure of the formed compounds was more susceptible to biodegradation. The study also determined the effect of ultrasonic field on the evolution of the BOD5 treated leachates and BOD5/COD ratio. The BOD5 sharp increase was observed at the time of sonification of leachate in the range of 60 to 300 s in the whole studied range of amplitudes. This suggests that by the action of the ultrasonic field generated in the effluents of chemical compounds had greater biodegradability.The process confirmed by the change in the ratio of BOD5/COD. The highest value of BOD5 indicator (460 mg/dm3) was at the time of subjecting the leachate impact of ultrasound using amplitude equal to the size of 25 μm and for the time of sonification equal 300 s. In this case the BOD5/COD factor increased to 0.12, and it was about 26% higher as compared to the value of this indicator for leachate no-sonificated (0.089).
Gromadzenie odpadów komunalnych na składowiskach, nawet prawidłowo zaprojektowanych i eksploatowanych, jest istotnym zagadnieniem w inżynierii środowiska z uwagi na problemy ochrony wód gruntowych przed zanieczyszczeniem odciekami. Odcieki powstają w wyniku infiltracji opadów atmosferycznych przez złoże odpadów i wymywanie z niego związków organicznych i nieorganicznych, niejednokrotnie o charakterze toksycznym. Dotychczas zidentyfikowano ponad 200 substancji organicznych będących zanieczyszczeniami odcieków, z których aż 35 należy do tzw. „priority pollutants”. W miarę upływu czasu wskutek obniżania się stężenia związków organicznych w odciekach zmniejszają się wartości biologicznego i chemicznego zapotrzebowania tlenu, co związane jest ze stabilizacją składowiska w miarę wydłużania czasu jego eksploatacji. Wskaźnik BZT5 szybciej maleje w porównaniu z ChZT, w związku z czym stosunek BZT5/ChZT ulega zmniejszeniu nawet do poziomu 0,06. W odciekach powstających na „starych” składowiskach odnotowuje się obecność znacznych ilości kwasów humusowych charakteryzujących się bardzo stabilną strukturą trudną do naruszenia przez bakterie. Dlatego też efektywność ich oczyszczania metodą biologiczną osadu czynnego lub fermentacji metanowej nie jest zbyt wysoka. Założono, że fale ultradźwiękowe wywołają zmianę struktury związków organicznych i przyczynią się do przyśpieszenia biodegradowalności, między innymi substancji refrakcyjnych w odciekach, dzięki czemu wzrośnie efektywność ich oczyszczania w procesach biologicznych. Do nadźwiękawiania odcieków użyto dezintegratora ultradźwiękowego typu Sonisc vibro cel (40 kHz). Zakres wartości amplitud drgań zmienił się od 25 do 123 μm, a czas ekspozycji (nadźwiękawiania odcieków) od 60 do 720 s. Podczas sonifikacji dokonywano również pomiaru wielkości energii sonochemicznej wytwarzanej podczas nadźwiękawiania odcieków. Stwierdzono m.in., że proces sonifikacji odcieków wyraźnie wpłynął na powstawanie i uwolnienie związków alifatycznych. Grupy –CH2 i –CH3 mogły być uwalniane ze związków humusowych lub połączeń aromatycznych; zaobserwowano również powstawanie znacznych ilości związków z grupą funkcyjną –OH, które mogły być pochodnymi alkoholi i kwasów karboksylowych. Zmiany te wskazują na naruszenia struktury chemicznej związków organicznych zawartych w odciekach, wskutek czego powstawały związki o strukturze chemicznej bardziej podatnej na proces biodegradacji. W badaniach określono także wpływ pola ultradźwiękowego na zmiany wskaźnika BZT5 oczyszczanych odcieków oraz na stosunek BZT5/ChZT. Wyraźny wzrost BZT5 obserwowano w momencie nadźwiękawiania odcieków w zakresie od 60 do 300 s w całym przebadanym zakresie amplitud. Sugeruje to, że wskutek oddziaływania pola ultradźwiękowego na odcieki powstają w nich związki chemiczne o większym stopniu biodegradowalności. Zachodzący proces potwierdziła zmiana wartości stosunku BZT5/ChZT. Najwyższą wartość 460 mg/dm3 wskaźnik BZT5 przyjął w momencie poddawania odcieków oddziaływaniu ultradźwięków przy zastosowaniu wielkości amplitudy równej 25 μm i dla czasu nadźwiękawiania 300 s. Współczynnik BZT5/ChZT w tym przypadku wzrósł do poziomu 0,12 i był on o 26% wyższy w porównaniu do wartości tego wskaźnika dla odcieków nienadźwiękawianych (0,089).
Źródło:
Inżynieria i Ochrona Środowiska; 2016, 19, 4; 561-575
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania spektralne (FTIR, UV-Vis) montmorylonitu modyfikowanego ultradźwiękami i kationami potasu
Spectral study (FTIR, UV-Vis) of montmorillonite modified by ultrasound and potassium cations
Autorzy:
Grabowska, B.
Kurleto-Kozioł, Ż.
Powiązania:
https://bibliotekanauki.pl/articles/391444.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
montmorylonit
modyfikacja montmorylonitu
wymiana jonowa
CEC
pole ultradźwięków
montmorillonite
montmorillonite modification
ion exchange
ultrasound field
Opis:
W pracy przedstawiono wyniki badań spektralnych (FTIR, UV-Vis) przeprowadzonych dla próbek nieaktywowanego bentonitu (wapniowego) posiadającego w swym składzie główny składnik mineralny montmorylonit (MMT). MMT, jako składnik bentonitu zawierający jony wapnia (Ca-MMT), poddano modyfikacji na drodze fizycznej i chemicznej. Proces aktywacji fizycznej zainicjowano działaniem pola ultradźwięków (40 kHz). Modyfikację chemiczną Ca-MMT, poprzez wymianę jonową kationów wapnia na kationy potasu, przeprowadzono z udziałem modyfikatora w postaci węglanu potasu, przy czasie aktywacji równym 1 h. W celu określenia efektywności przeprowadzonej modyfikacji dla zmodyfikowanych fizycznie i chemicznie próbek montmorylonitu (K-MMT) w bentonicie przeprowadzono cykl badań analitycznych, w tym strukturalnych (FTIR) oraz spektrofotometrycznych (UV-Vis). Stwierdzono, że rodzaj i sposób prowadzenia modyfikacji, w tym zmiana czasu działania czynnika fizycznego na nieaktywowany bentonit, wpływa na zdolność do wymiany jonowej montmorylonitu (CEC). Zarówno zmodyfikowany fizycznie (ultradźwięki), jak i chemicznie (kationy potasu) MMT w bentonicie wapniowym wykazuje CEC na nieco niższym poziomie od CEC wyznaczonego dla stosowanego w technologii mas formierskich bentonitu sodowego. Zmodyfikowany MMT może więc stanowić alternatywny materiał wiążący do zastosowania w masach klasycznych.
This paper presented the spectral study (FTIR, UV-Vis) for samples of non-activated bentonite (calcium) which has in its composition a main mineral resource, montmorillonite (MMT). MMT, as a component which contains calcium ions (Ca-MMT, was modified physically and chemically. The process of physical activations was initiated by an ultrasound field (40 kHz) with the use of a modificator in the form of potassium carbonate with an activation time of 1 h. To measure the efficiency of the modification for modified physically and chemically samples of montmorillonite (K-MMT) in bentonite there was performed a cycle of test including structural (FITR) and spectrofotometric (UV-Vis) analysis. It was stated that the type and method of making the modification including change of time in which physical factors are influencing the non-activated bentonite influences on the change of ion exchange of montmorillonite (CEC). Both modified physically (ultrasound) and chemically (potassium cations) MMT in calcium bentonite exhibits CEC on a slightly lower level than CEC used in the moulding sand technology of sodium bentonite. Modified MMT can be therefore used as an alternative material for green sand.
Źródło:
Prace Instytutu Odlewnictwa; 2017, 57, 2; 125-136
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ultrasound Field on Dewatering of Sewage Sludge
Wpływ pola ultradźwiękowego na odwadnianie osadów ściekowych
Autorzy:
Wolski, P.
Zawieja, I.
Powiązania:
https://bibliotekanauki.pl/articles/204592.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pole ultradźwiękowe
odwadnianie
osad ściekowy
osad nadmierny
fermentacja metanowa
ultrasound field
dewatering
sewage sludge
methane fermentation
Opis:
The paper presents the investigations aimed at the determination of the effect of time and wavelength of ultrasound field on the value of capillary suction time (CST), sludge thickening and dry matter of the excess sludge subjected to the process of stabilization. The investigations were carried out on the excess sludge which comes from communal waste treatment plant. The sludge was exposed to ultrasound field, using ultrasound generator with power of 1500 W, frequency of 20 kHz and amplitude 39.42 ?m (which corresponded to the amplitude of 100%). Sonication of the sludge was carried out for different amplitudes and sonication times. The non-conditioned sludge and the sludge initially conditioned with ultrasound field were subjected to the process of stabilization in laboratory flasks (V = 0.5 dm3) for the period of 10 days. On each day, sludge thickening and dewatering capacities were determined. The sludge subjected to the effect of ultrasound field exhibited elevated levels of CST. However, the sonication time had positive effect on the increase in the degree of thickening for each of the amplitudes studied. Also, the process of stabilization positively affected final thickening and dewatering of the sludge.
W artykule przedstawiono badania mające na celu określenie wpływu czasu i długości fali pola ultradźwiękowego na wartości czasu ssania kapilarnego (CSK), zagęszczania oraz suchej masy osadów nadmiernych poddanych procesowi stabilizacji. Do badań wykorzystano osady nadmierne pochodzące z komunalnej oczyszczalni ścieków. Osady poddano działaniu ekspozycji pola UD, wykorzystując procesor ultradźwiękowy o mocy 1500 W, częstotliwości 20 kHz i długości fali 39,42 ?m (co odpowiadało amplitudzie równej 100%). Nadźwiękawianie osadów prowadzono przy różnych długościach fal i czasach sonifikacji. Osady niekondycjonowane oraz wstępnie kondycjonowane polem UD poddano procesowi stabilizacji w kolbach laboratoryjnych (V = 0,5 dm3) przez okres 10 dni. W każdym dniu prowadzenia procesu oznaczano zdolność osadów do ich zagęszczania i odwadniania. Osady poddane działaniu pola UD posiadały wyższe wartości CSK. Czas nadźwiękawiania miał jednak pozytywny wpływ na zwiększenie stopnia zagęszczania dla każdej z badanych amplitud. Również proces stabilizacji wpłynął pozytywnie na końcowe zagęszczanie i odwadnianie badanych osadów.
Źródło:
Archives of Environmental Protection; 2012, 38, 2; 25-31
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic waves in ceramics with the electroinduced anisotropy
Autorzy:
Khakhomov, S. A.
Barsukov, S. D.
Semchenko, I. V.
Powiązania:
https://bibliotekanauki.pl/articles/385240.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
ultrasound
rotating electric field
interaction
anisotropy
ceramics
Opis:
The effects related with formation of induced anisotropy in natural-isotropic media, have been studied already for a long time. These phenomena interest scientists first of all due to a rare opportunity of control of artificial anisotropy of media, and also due to an opportunity of the energy transfer to a propagating acoustic or an electromagnetic wave. The idea of the nonlinear interaction of an acoustic and rotating electric field for the observation of parametrical electro-acoustic effects in crystals belongs to V.N Belyi and B.B. Sevruk, and has been ascertained more than 20 years ago [1], [2]. Then this idea has being developed by physicists of the Gomel State University [3]-[8] where F.I. Fedorov, B.V. Bokut', and A.N. Serdyukov [9]-[10] created a scientific school in the field of optics and acoustics. Until the present time the opportunity of suppression of absorption of ultrasound by rotating an electric field and amplification of ultrasonic waves in a crystal in conditions of resonant interaction of an electric field with ultrasound [11]-[14] has been predicted. In this case, media with the induced rotating spatially homogeneous acoustic anisotropy represent an acoustic analogue of spatially periodic media, showing the effects characteristic for the last.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2009, 3, 4; 191-201
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Acoustic Field Distribution Inside the Ultrasonic Ring Array
Autorzy:
Staszewski, W.
Gudra, T.
Opieliński, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/177105.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasound transmission tomography
acoustic field
ultrasonic multi-element array
Opis:
This paper presents and analyses the results of a simulation of the acoustic field distribution in sectors of a 1024-element ring array, intended for the diagnosis of female breast tissue with the use of ultrasonic tomography. The array was tested for the possibility to equip an ultrasonic tomograph with an additional modality - conventional ultrasonic imaging with the use of individual fragments (sections) of the ring array. To determine the acoustic field for sectors of the ring array with a varying number of activated ultrasonic transducers, a combined sum of all acoustic fields created by each elementary transducer was calculated. By the use of MATLAB software, a unique algorithm was developed, for a numerical determination of the distribution of pressure of an ultrasonic wave on any surface or area of the medium generated by the concave curvilinear structure of rectangular ultrasound transducers with a geometric focus of the beam. The analysis of the obtained results of the acoustic field distribution inside the ultrasonic ring array used in tomography allows to conclude that the optimal number of transducers in a sector enabling to obtain ultrasound images using linear echographic scanning is 32 ≤ n ≤ 128, taking into account that due to an increased temporal resolution of ultrasonic imaging, this number should be as low as possible.
Źródło:
Archives of Acoustics; 2018, 43, 3; 455-463
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Dynamic Beam Deflection and Focus Shift on the Acoustic Field Distribution Inside the Ultrasonic Ring Array
Autorzy:
Staszewski, Wiktor
Gudra, Tadeusz
Opieliński, Krzysztof J.
Powiązania:
https://bibliotekanauki.pl/articles/176553.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ultrasonic ring array
acoustic field distribution
ultrasonic beam focusing
ultrasound tomography
Opis:
This paper presents the results of acoustic field distribution simulations for the 1024-element ultrasonic ring array intended for the diagnosis of female breast tissue with the use of ultrasound tomography. For the purpose of analysing data, all acoustic fields created by each elementary transducer were combined. The natural position of the focus inside the ultrasonic ring array was changed by altering activation time of individual transducers in sectors consisting of 32, 64, and 128 ultrasonic transducers. Manipulating the position of the focus inside the array will allow to concentrate the ultrasonic beam in a chosen location in the interior space of the ring array. The goal of this research is to receive the best possible quality of images of cross-sections of the female breast. The study also analysed the influence of the acoustic field distribution on the inclination of the beam. The results will enable to choose an optimal focus and an optimal number of activated transducers.
Źródło:
Archives of Acoustics; 2019, 44, 4; 625-636
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New methods for inactivation of Alicyclobacillus acidoterrestris spores in apple juice concentrate
Autorzy:
Djas, M.
Bober, M.
Henczka, M.
Powiązania:
https://bibliotekanauki.pl/articles/115690.pdf
Data publikacji:
2011
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
Alicyclobacillus acidoterrestris
spores
inactivation
pulsed electric field (PEF)
ultrasound (US)
microwaves (MW)
Opis:
This paper is focused on new methods for inhibiting Alicyclobacillus acidoterrestris spores germination in apple juice concentrate. Four methods such as pulsed electric field (PEF), ultrasound (US), integrated method of PEF and US and microwaves (MW) have been investigated. The highest efficiency of spores inactivation was obtained after microwave treatment.
Źródło:
Challenges of Modern Technology; 2011, 2, 2; 46-49
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niekonwencjonalne metody ekstrakcji : ekstrakcja ekologiczna
Unconventional methods of extractions : green extraction
Autorzy:
Nowosad, Karolina
Sujka, Monika
Powiązania:
https://bibliotekanauki.pl/articles/972309.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
ekstrakcja ekologiczna
ekstrakcja płynem nadkrytycznym
ekstrakcja za pomocą ultradźwięków
ekstrakcja za pomocą pulsacyjnego pola elektrycznego
ekstrakcja za pomocą enzymów
green extraction
extraction with supercritical fluid
extraction using ultrasound
extraction using a pulsed electric field
extraction using enzymes
Opis:
Extraction is a method of extracting a chemical from a solution or mixture of solid substances. Conventional methods of extraction, for example, Soxhlet method, require the use of hazardous solvents, are time-consuming and cause degradation of the extracted compounds. Green extraction is characterized by the speed, it gives a quantitative recovery of the extract and does not cause degradation of the components. It takes place at a lower energy consumption than conventional extraction. A number of novel alternatives to conventional extraction techniques have been proposed, including ultrasonic assisted extraction (UAE), supercritical fluid extraction (SFE), enzyme extraction or pulsed electric field. These techniques allow to reduce or eliminate the use of toxic solvents, improve process efficiency and extract quality. The temperature of the above-mentioned processes is low, which affects the behavior of temperature-sensitive substances. The widely used "green extraction" is SFE - extraction with supercritical fluid. The solvent is a supercritical fluid, most often carbon dioxide. Ultrasonic extraction is environmentally friendly, easy to use, versatile and relatively cheap compared to other innovative techniques. This technique can be used to extract, for example, polysaccharides, essential oils, proteins, peptides, dyes, pigments and bioactive substances. Extraction with the use of pulsed electric field is used to extract mainly polyphenols and other bioactive components. Extraction with enzymes (mainly pectinases, cellulases and hemicellulases) is widely used in the food industry, eg for clarifying beer and juices. The extraction yield depends on the solvent system, temperature, enzyme function, substrate availability and pH.
Źródło:
Wiadomości Chemiczne; 2019, 73, 9-10; 465-479
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies