Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "uderzenia" wg kryterium: Temat


Wyświetlanie 1-55 z 55
Tytuł:
Zintegrowany system monitorowania miejsca uderzenia balistycznych pocisków artyleryjskich i rakiet
Integrated system for spotting the falls of ballistic artillery shells and missiles
Autorzy:
Weiss, J.
Grzybowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/235486.pdf
Data publikacji:
2018
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
system monitorowania
lokalizacja
detekcja uderzenia
monitoring system
localization
impact detection
Opis:
System monitorowania miejsca uderzenia pocisków artyleryjskich charakteryzuje się tym, że pole rażenia pociskami w rejonie strzelań jest wyposażone w detektory, z których każdy posiada mikrokomputer jednoukładowy z lokalizatorem GPS, interfejsem komunikacji radiowej oraz redundantnym źródłem zasilania, przy czym są one zlokalizowane w odległościach nie większych niż 50 m między sobą na ziemi a 100 m na wodzie. W związku z tym, w rejonie tego pola usytuowany jest nadajnik transmisji danych, natomiast na stanowisku kierowania (dowodzenia) i oceny wyników strzelania znajduje się odbiornik transmisji danych oraz komputer z oprogramowaniem wizualizującym miejsca uderzenia pocisków. Na podstawie analizy danych otrzymywanych z detektorów w postaci skompresowanych rekordów informacji cyfrowej, oprogramowanie nadzorujące odtwarza zdarzenie i jego miejsce a następnie lokalizuje je na obrazie obszaru prezentowanym na monitorze w czasie rzeczywistym. Na podstawie otrzymanych danych będzie możliwość weryfikacji i oceny wykonywanych zadań ogniowych.
A system monitoring the falls of artillery projectiles within the area of live firings consists of detectors, separated by distances no larger than 50 m in the ground and 100 m in water, having a single core microcomputer with GPS localiser, radio link interface and a powering battery. For this reason a data transmitter is placed near the area and a receiver of transferred data and a computer with the software for visualisation of projectile impact sites is placed on a centre for controlling (commanding) and evaluating the results of firing. The managing software reconstructs an event and its position and displays it in the real time into the picture of the area shown on the monitor by analysing the data received from detectors in the form of compressed records of digital data. The received data can be used for verification and evaluation of performed firing assignments.
Źródło:
Problemy Techniki Uzbrojenia; 2018, 47, 146; 39-50
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of repeated impact on damage growth in fibre reinforced polymer composites
Wpływ uderzeń wielokrotnych na rozwój uszkodzenia kompozytów polimerowych wzmacnianych włóknami
Autorzy:
Bieniaś, J.
Surowska, B.
Jakubczak, P.
Powiązania:
https://bibliotekanauki.pl/articles/1365966.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
composites
repeated impact
NDT
damage
kompozyt
uderzenia
badania nieniszczące
uszkodzenie
Opis:
The study presents the problems of the influence of repeated low velocity and low energy impacts on damage growth in carbon and glass fibre reinforced high strength polymer composite. The laminate response to impacts was analyzed, the types of damages and their interrelations were identified as well as damages mechanisms were described for tested laminates subjected to repeated impacts. The following conclusions have been drawn on the basis of completed tests: (1) composite materials with polymer matrix reinforced with continuous glass and carbon fibres demonstrate limited resistance to repeated impacts. The laminates resistance to impacts depends mainly on the properties and type of components, particularly in case of reinforcing fibres, orientation of layer under the influence of external impact; (2) tested laminates with carbon fibres are characterized by lower resistance to repeated impacts than laminates with glass fibres. This is proved by the curves of laminate response to impacts, wider damage area and tendency to laminate structure perforation as a result of repeated impacts; (3) repeated impacts lead to damage growth mainly through propagation of damage initiated in initial impacts phase. Delaminations and matrix cracks belong to the basic mechanisms of damages in composite materials; (4) composite damage propagates with increasing number of impacts in fibres orientation direction, particularly in lower composite layers. Further impacts may result in higher stress concentration and higher initiation energy causing the damage growth in various areas of the material. Further impacts increase the damage leading to gradual growth of damages initiated before.
W pracy przedstawiono problematykę wpływu powtarzających się uderzeń o niskiej prędkości i niskiej energii na rozwój uszkodzenia wysokowytrzymałych kompozytów polimerowych wzmacnianych włóknem węglowym oraz szklanym. Dokonano analizy odpowiedzi laminatu na uderzenia, zidentyfikowano rodzaj i relacje pomiędzy uszkodzeniami, a także przedstawiono mechanizmy uszkodzenia w badanych laminatach poddanych wielokrotnym uderzeniom. Na podstawie przeprowadzonych badań wykazano że: (1) materiały kompozytowe o osnowie polimerowej wzmacniane ciągłymi włóknami szklanymi i węglowymi wykazują ograniczoną odporność na wielokrotne uderzenia. O odporności laminatów na uderzenia decydują głównie właściwości i rodzaj komponentów, w szczególności włókien wzmacniających, orientacja warstw pod wpływem oddziaływania zewnętrznego; (2) badane laminaty z włóknami węglowymi charakteryzują się niższą odpornością na wielokrotne uderzenia w porównaniu do laminatów z włóknem szklanym. Świadczą o tym charakterystyki odpowiedzi laminatu na uderzenia, większy obszar uszkodzenia oraz skłonność do perforacji struktury laminatu w wyniku wielokrotnych uderzeń; (3) uderzenia wielokrotne powodują rozwój uszkodzenia głównie przez propagację uszkodzenia inicjowanego w czasie początkowych uderzeń. Do podstawowych mechanizmów uszkodzenia materiałów kompozytowych należą rozwarstwienia oraz pęknięcia osnowy; (4) wraz ze wzrostem liczby uderzeń uszkodzenie kompozytu propaguje w kierunku ułożenia włókien, szczególnie dolnych warstw kompozytu. Kolejne uderzenia mogą powodować większą kumulację naprężeń oraz energii inicjacji odpowiedzialnej za rozwój uszkodzenia w różnych obszarach materiału. Kolejne uderzenia powodują zwiększanie uszkodzenia prowadząc do stopniowego rozwoju wcześniej zainicjowanych uszkodzeń.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 2; 194-198
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of water impact for symmetric wedge by experimental and numerical methods
Autorzy:
Nikfarjam, M.
Koto, J.
Yaakob, O. B.
Seif, M. S.
Aref, A.
Powiązania:
https://bibliotekanauki.pl/articles/266182.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
hydrodynamika
ciśnienie uderzenia
statek
symmetric wedge
hydrodynamic impact
impact pressure
Opis:
Evaluation of impact loads when a ship hull contacts the wave surface is one of the main issues for researchers who are going to design the structure of marine vehicles. In this paper, the results of experimental tests and numerical modeling of the distribution of pressure on different wedge-shaped models are reported and the effect of related parameters such as the deadrise angles, the weight and drop heights, is assessed. The output of analyses and the results can give appropriate approximations of the maximum impact pressures for the geometries that are similar to marine vehicle’s hull sections to estimate the hydrodynamic impact loads in different sea-states. In addition, other effective parameters such as the impact speed, acceleration and water entry process can be used for evaluating the performance of such crafts.
Źródło:
International Journal of Applied Mechanics and Engineering; 2019, 24, 1; 221-230
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Morphology of Impact Fracture Surfaces in Manganese Cast Steel Modified by Rare Earth Elements
Autorzy:
Kasińska, J.
Powiązania:
https://bibliotekanauki.pl/articles/946876.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast steel
modification
REM
impact strength
fracture analysis
staliwa
modyfikacja
siła uderzenia
pęknięcia
Opis:
The morphology of G20Mn5 specimens made of non-modified and rare earth metals (REM) modified cast steel was investigated. Molten metal was treated with a cerium-rich mischmetal contain 49.8% Ce, 21.8% La, 17.1% Nd, 5.5% Pr and 5.35% other rare earth metals making up the balance. The melting, quenching (920°C/water) and tempering (720°C/air) were performed under industrial conditions. Analysis included G20Mn5 cast steel fracture specimens subjected to Charpy V-notch impact testing at 20°C, -30°C and -40°C. The purpose of the analysis was to determine the influence of REM on the microstructure and mechanical properties of G20Mn5 cast steel and the REM effect on the morphology, impact strength and character of the fracture surfaces. In addition, a description of the mechanism by which fracture occurred in the two materials was proposed. The author demonstrated the beneficial effects of adding REM to molten steel, manifested by a 20 - 40% increase in impact toughness, depending on test temperature, as compared to the non-modified cast steel. Important findings included more than 100% increase in impact strength in comparison with the required impact toughness of 27J at -40C for heat treated steels (EN 10213).
Źródło:
Archives of Foundry Engineering; 2020, 20, 2; 89-94
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zaniepokojenie Warszawy : Frankfurter Allgemeine Zeitung o reakcjach na wypowiedzi niemieckiego ministra spraw zagranicznych Fischera w sprawie strategii NATO
Autorzy:
Ludwig, Michael.
Powiązania:
Forum 1998, nr 49, s. 4-5
Współwytwórcy:
(jm). Tłumaczenie
Data publikacji:
1998
Tematy:
NATO strategia projekty
Strategia obronna NATO projekty
Strategia uderzenia atomowego projekty NATO
Opis:
Tł. art. zamieszcz. w "Frankfurter Allgemeine Zeitung". -- 1998, 26 XI.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Influence of Natural Ageing on Impact Strength of the EN AC-AlSi9Cu3(Fe) Alloy
Autorzy:
Pezda, J.
Jarco, A.
Powiązania:
https://bibliotekanauki.pl/articles/382298.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloy
natural ageing
impact strength
stop aluminium
starzenie naturalne
odporność na uderzenia
Opis:
Growing market demand, more and more efficient and cleaner vehicles create a challenge for automotive industry. Properties of aluminum, such as: high strength stiffness to weight ratio, high fluidity and castability, easy machinability and weldability and good corrosion resistance make them ideal candidate to replacement of a heavier materials used in vehicles, and the same, have direct effect on fuel consumption. Comparing to steel, titanium or carbon fibers, aluminum alloys are characterized by low impact strength, which can be improved by a heat treatment. In this study one investigated the effect of the heat treatment (natural ageing) on the EN AC-AlSi9Cu3(Fe) alloy modified with strontium. Solution heat treatment temperature’s ranges were selected on the base of heating (melting) curves recorded with use of the thermal derivative analysis (ATD) method. Temperatures of the solution heat treatment were 495°C, 510°C, and 525°C ± 5°C, while the solutioning time ranged from 15 to 105 minutes (15; 60 and 105 min.). Time of the ageing amounted to 1, 3 and 7 days. To determine impact strength of the alloy after performed heat treatment one implemented simplified Charpy test. Maximal values of the impact strength (9,6 J/cm2) were obtained for solutioning temperature 510°C and solutioning time 15 minutes, after seven days of ageing. Obtained results enabled determination of solutioning parameters, which allow obtainment of increased impact strength of the investigation alloy for the T4 heat treatment.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 81-84
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of transient flows in a hydraulic system with a long liquid line
Symulacja przepływów przejściowych w układzie hydraulicznym z hydrauliczną linią długą
Autorzy:
Zarzycki, Z.
Kudźma, S.
Kudźma, Z.
Stosiak, M.
Powiązania:
https://bibliotekanauki.pl/articles/281500.pdf
Data publikacji:
2007
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
układy hydrauliczne
pulsacje pomp
uderzenia hydrauliczne
unsteady pipe flow
transients
pulsation of pump
Opis:
The paper presents the problem of modelling and simulation of transients phenomena in hydraulic systems with long liquid lines. The unsteady resistance model is used to describe the unsteady liquid pipe flow. The wall shear stress at the pipe wall is expressed by means of the convolution of acceleration and a weighting function which depends on the (laminar or turbulent) character of the flow. The results of numerical simulation are presented for the waterhammer effect, which is caused by a sudden shift of the hydraulic directional control valve. The following cases of the system supply are considered: the first, with a constant delivery rate of the pump and the second, which additionally considers pulsation of the delivery of the pump. Computer simulations are compared with results of experiments. They are found to be very consistent in the case with the variable rate of the pump delivery taken into accent.
Artykuł przedstawia zagadnienie modelowania i symulacji zjawisk przejściowych w układach hydraulicznych z hydrauliczną linią długą. Wykorzystano model tarcia niestacjonarnego do opisu niestacjonarnego przepływu w przewodzie. Naprężenia ścinające na ściankach przewodów są określone za pomocą przyspieszenia i finkcji wagi, która zależy od charakteru przepływu (uwarstwiony, turbulentny). Rezultaty symulacji numerycznych są prezentowane dla uderzenia hydraulicznego, które spowodowane jest poprzez nagłe przesterowanie rozdzielacza. Rozpatrywane są dwa przypadki: pierwszy - gdy układ zasilający podaje stałą wartość natężenia przepływu, drugi uwzględniający pulsację wydajności pompy wyporowej. Symulacje komputerowe są porównane z wynikami badań eksperymentalnych. Wykazano dużą zgodność symulacji komputerowych uwzględniających pulsację wydajności pompy z wynikami eksperymentu.
Źródło:
Journal of Theoretical and Applied Mechanics; 2007, 45, 4; 853-871
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na uderzenia laminatów stosowanych na elementy nadwozia pojazdów transportowych
Impact resistanse laminates used to transport vehicle of bodywork parts
Autorzy:
Krzyżak, A.
Nizio, M.
Powiązania:
https://bibliotekanauki.pl/articles/309751.pdf
Data publikacji:
2014
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
kompozyty polimerowe
elementy nadwozia
odporność na uderzenia
polymer composites
car body elements
impact test
Opis:
Powszechnie stosowane na osłony, zderzaki, obudowy maszyn i urządzeń laminaty poliestrowo-szklane z racji pełnionej funkcji są narażone na różnego rodzaju dynamiczne oddziaływanie siły skupionej. Uderzenia często mają charakter powtarzających się cyklicznie zdarzeń. W artykule zaprezentowano wyniki badań dotyczące laminatów poliestrowo-szklanych wzmocnionych matami oraz tkaninami poddanych kilkudziesięciokrotnym uderzeniom. Zastosowano znormalizowaną metodę spadającego grota, metodę stopniowego wyznaczania. Wyniki pomiarów wskazują na dużą odporność na przebicie laminatów wykonanych z tkanin szklanych, równocześnie wskazują na znalezienie rozsądnego kompromisu pomiędzy laminatami o znacznej sztywności, tańszych, wykonanych z mat, a dużą wytrzymałością na uderzenia laminatów o stosunkowo niskiej sztywności przy małej liczbie warstw tkanin, przez to tańszych.
Commonly used on the cover, bumpers, machinery and equipment enclosures polyester-glass laminates because of their function are exposed to various types of dynamic interaction of concentrated force. Strokes often are cyclically repeated events. The article presents the results of research on fi berglass reinforced mats and textiles of glass fi ber treated multiple repeated impacts. Used a standardized method of falling the mainsail, progressive method of selection. The measurement results indicate a high resistance to puncture laminates made from glass fabric, while point to fi nd a reasonable compromise between the laminates of substantial the stiffness, cheaper, made of a mat, and the high impact resistance of laminates with relatively low the stiffness at low number of layers of fabrics.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2014, 15, 5; 78-82
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metod bezsiatkowych do modelowania pocisków pistoletowych
Application of meshless methods for pistol bullets modelling
Autorzy:
Kędzierski, Piotr
Watorowska, Julia
Powiązania:
https://bibliotekanauki.pl/articles/2097735.pdf
Data publikacji:
2021
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
inżynieria mechaniczna
symulacja uderzenia
pocisk pistoletowy
SPH
SPG
mechanical engineering
impact simulation
pistol bullet
Opis:
Artykuł przedstawia analizę możliwości zastosowania dwóch metod bezsiatkowych do modelowania pocisków pistoletowych na przykładzie pocisku 9 mm Parabellum. Badania obejmowały metody SPH (Smoothed Particle Hydrodynamics) oraz SPG (Smoothed Particle Galerkin). Wyniki symulacji komputerowych zostały porównane z wynikami testów balistycznych pod względem zgodności kształtowo-wymiarowej zdeformowanego pocisku. Błąd względny średnicy pocisku wynosił 15% i 17% odpowiednio dla metody SPG i SPH. Postać deformacji dla metody SPH odbiegała od wyników testów balistycznych, podczas gdy metoda SPG wiernie odwzorowała kształt zdeformowanego pocisku.
The paper presents an analysis of applicability of two meshless methods for pistol bullets modelling based on an example of a 9 mm Parabellum. The studies included the following methods: smoothed Particle Hydrodynamics (SPH) method and smoothed Particle Galerkin (SPG) method. The results of computer simulations were confronted with ballistic test results in terms of shapedimensional compliance of the deformed projectile. The relative error of the projectile diameter was 15% and 17% for the SPG and SPH methods, respectively. The deformation form for the SPH method deviated from the ballistic test results, while the SPG method faithfully reproduced the shape of the deformed projectile.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2021, 70, 2; 89--99
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification based on a finite element model of an impact force occurring on a composite structure
Autorzy:
El-Bakari, Abdelali
Khamlichi, Abdellatif
Hanafi, Issam
Powiązania:
https://bibliotekanauki.pl/articles/27312394.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
analiza modalna
siła uderzenia
struktura złożona
inverse problem
modal analysis
identification
impact force
composite structure
Opis:
Based on the inverse approach and the finite element method, the quality of a reconstructed signal is discussed in this work. The responses caused by a distributed impact on a portion of a composite structure can be recovered using dynamic analysis. The structure is thought to be complex and made up of two different-sized plates made of two different materials. The robustness of the inversion method was studied, as well as the sensitivity of the numerical method compared to modal truncation and sampling of the frequency response function (FRF). Once the FRF had been identified, regularized deconvolution as per generalized singular value decomposition was used to reconstruct the impact signal characteristics. It was revealed that only one mode is required to reconstruct the impact signal.
Źródło:
International Journal of Applied Mechanics and Engineering; 2023, 28, 1; 23--36
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact Strength of Austenitic and Ferritic-Austenitic Cr-Ni Stainless Cast Steel in -40 and +20°C Temperature
Udarność kwasoospornego staliwa Cr-Ni w temperaturze -40 i +20°C
Autorzy:
Kalandyk, B.
Zapała, R.
Boroń, Ł.
Solecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/353749.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless cast steel
microstructure
impact strength
fractographic examination
staliwo nierdzewne
mikrostruktura
odporność na uderzenia
udarność
Opis:
Studies described in this paper relate to common grades of cast corrosion resistant Cr-Ni steel with different matrix. The test materials were subjected to heat treatment, which consisted in the solution annealing at 1060°C followed by cooling in water. The conducted investigations, besides the microstructural characteristics of selected cast steel grades, included the evaluation of hardness, toughness (at a temperature of -40 and +20°C) and type of fracture obtained after breaking the specimens on a Charpy impact testing machine. Based on the results of the measured volume fraction of ferrite, it has been found that the content of this phase in cast austenitic steel is 1.9%, while in the two-phase ferritic-austenitic grades it ranges from 50 to 58%. It has been demonstrated that within the scope of conducted studies, the cast steel of an austenitic structure is characterised by higher impact strength than the two-phase ferritic-austenitic (F-A) grade. The changing appearance of the fractures of the specimens reflected the impact strength values obtained in the tested materials. Fractures of the cast austenitic Cr-Ni steel obtained in these studies were of a ductile character, while fractures of the cast ferritic-austenitic grade were mostly of a mixed character with the predominance of brittle phase and well visible cleavage planes.
Zaprezentowane w artykule badania dotyczą popularnych gatunków kwasoodpornego staliwa Cr-Ni o różnej osnowie. Zastosowane do badań materiały poddano obróbce cieplnej (przesycanie w temperaturze 1060°C i chłodzenie w wodzie). Przeprowadzone badania oprócz charakterystyki mikrostruktury wybranych gatunków staliwa obejmowały ocenę twardości, udarności (w temperaturze -40 i +20°C) oraz charakteru przełomów uzyskanych w wyniku złamania próbek na młocie Charpie'go. Na podstawie uzyskanych wyników udziału objętościowego ferrytu stwierdzono, że w staliwie austenitycznym występuje 1.9% tej fazy, natomiast w dwóch staliwach ferrytyczno-austenitycznych (F-A) udział ferrytu mieścił się w przedziale 50÷58%. Wykazano, że staliwo o strukturze austenitycznej charakteryzuje się wyższą udarnością w porównaniu do dwufazowego staliwa ferrytyczno-austenitycznego (F-A). Zmiany jakie zaszły w charakterze przełomów próbek były odzwierciedleniem uzyskanych wyników udarności badanych materiałów. W zakresie przeprowadzonych badań przełomy austenitycznego staliwa Cr-Ni wykazują charakter ciągliwo-kruchy, a przełomy staliwa F-A są przeważnie przełomami o charakterze mieszanym z przewagą przełomu kruchego z widocznymi płaszczyznami łupliwości.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 1103-1106
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie zjawiska uderzenia hydraulicznego w pionowych instalacjach pompowych w warunkach laboratoryjnych
Investigation of water hammer phenomenon in vertical pumping installations under laboratory conditions
Autorzy:
Szymała, J.
Powiązania:
https://bibliotekanauki.pl/articles/340700.pdf
Data publikacji:
2008
Wydawca:
Główny Instytut Górnictwa
Tematy:
uderzenia hydrauliczne
pionowe instalacje pompowe
likwidacja zakładów górniczych
liquidation mine
vertical pumping installations
water hammer
Opis:
W artykule przedstawiono sposób oceny uderzeń hydraulicznych, występujących w pionowych instalacjach pompowych, na podstawie badań modelowych. W tym celu do zbudowania modelu instalacji wykorzystano kryterium podobieństwa dla cieczy lepkich oraz przeprowadzono badania. Dodatkowo zaproponowano zastosowanie amortyzatora powietrzno-cieczowego ograniczającego wzrost ciśnienia w rurociągu podczas występowania uderzenia hydraulicznego.
In the paper, a way of assessment on the basis of model investigations was presented of water hammer occurring in vertical pumping installations. In order to achieve this aim, a criterion of similarity for viscous liquids was used and tests were conducted for building the model of installation. Additionally, use of oleo-pneumatic shock absorber was proposed, restricting height of pressure in pipeline during occurrence of water hammer.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2008, 2; 67-80
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kierunki modyfikacji konstrukcji ochraniaczy przeciwuderzeniowych kończyn i ich wpływ na właściwości ochronne wyrobów gotowych
The trends of modifying the impact-resistant limb protectors and their effect on the final goods protective properties
Autorzy:
Fortuniak, K.
Redlich, G.
Powiązania:
https://bibliotekanauki.pl/articles/237898.pdf
Data publikacji:
2008
Wydawca:
Instytut Technologii Bezpieczeństwa Moratex
Tematy:
amortyzacja uderzenia
ochraniacze przeciwuderzeniowe
ochraniacze kończyn
właściwości ochronne
impact-resistant protectors
limb protectors
protective properties
Źródło:
Techniczne Wyroby Włókiennicze; 2008, R. 16, nr 1/2, 1/2; 20-25
1230-7491
Pojawia się w:
Techniczne Wyroby Włókiennicze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Teoretyczna analiza wpływu systemu aktywnej pokrywy komory silnika na obliczenia prędkości kolizyjnej samochodu, który potrącił pieszego
Theoretical analysis of the active hood system effect on the calculation of the impact speed of a car hitting a pedestrian
Autorzy:
Wach, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/26917664.pdf
Data publikacji:
2022
Wydawca:
Wydawnictwo Instytutu Ekspertyz Sądowych
Tematy:
potrącenie pieszego
prędkość kolizyjna
prędkość uderzenia
komora silnika
pedestrian accident
speed collision
impact speed
engine chamber
Opis:
Celem pracy była analiza wpływu systemu aktywnej pokrywy komory silnika na obliczenia prędkości kolizyjnej samochodu, który potrącił pieszego. Jednym z coraz częściej stosowanych tego typu systemów jest tak zwana aktywna pokrywa komory silnika (ang. Active Hood, Pop-up Bonnet). Po wykryciu kontaktu przedniej części nadwozia z pieszym, sterownik systemu generuje sygnał inicjujący uniesienie pokrywy, najczęściej jej tylnej części. Działanie to zapewnia zwiększenie dystansu pomiędzy pokrywą a twardymi elementami znajdującymi się w komorze silnika, redukując obrażenia pieszego (zwłaszcza głowy). Zmiana położenia pokrywy w trakcie zderzenia może mieć wpływ na wartość zmierzonego na samochodzie zasięgu wrzucenia oraz rozwinięcia pieszego, czyli wielkości wykorzystywanych do szacowania prędkości kolizyjnej samochodu. W artykule dokonano teoretycznej analizy wpływu zadziałania systemu na wartość przyrostu rozwinięcia pieszego, a w konsekwencji na szacowaną wartość minimalnej prędkości uderzenia. Uzyskane wyniki wskazują, iż w niektórych przypadkach uniesienie pokrywy komory silnika może nieznacznie wpływać na szacowaną wartość prędkości kolizyjnej, nie powinno to mieć jednak istotnego wpływu na rezultaty prowadzonej analizy.
The aim of the work was an analysis of the currently used solutions that ensure pedestrian protection at the time of collision. Selected systems from the area of external passive safety of a car are presented. One of the increasingly used systems of this type is the so-called Active Hood (Pop-up Bonnet). As a result of detecting the contact of the front part of the car body with a pedestrian, the system controller generates a signal initiating the lifting of the engine cover (usually its rear part) upwards. This increases the distance between the bonnet and the hard components in the engine compartment, reducing the severity of injuries to pedestrians (especially the head). The change of the position of the engine cover during a crash may have an impact on the value of wrap around distance. This quantity is used to estimate the collision speed of the car. The article presents a theoretical analysis of the impact of the Active Hood safety system on the value of the pedestrian wrap around distance increment and, consequently, on the estimated value of the minimum impact velocity. The obtained results indicate that in some cases the lifting of the bonnet may have a slight influence on the estimated value of the collision velocity, however, this should not have significant influence on the results of the analysis.
Źródło:
Paragraf na Drodze; 2022, 2; 63-71
1505-3520
2956-3631
Pojawia się w:
Paragraf na Drodze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the rotation and lifting of a motorcycle following an impact against a motor car side
Charakterystyka obrotu i unoszenia motocykla po uderzeniu w bok samochodu
Autorzy:
Prochowski, L.
Pusty, T.
Powiązania:
https://bibliotekanauki.pl/articles/1364737.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
bezpieczeństwo motocyklistów
dynamika motocykla
energia uderzenia
wypadki drogowe
impact energy
motorcycle dynamics
motorcyclist's safety
road accidents
Opis:
An analysis of the course of a road accident where a motorcycle hit the side of a passenger car has been presented. The scope of the analysis was limited to the post-impact motorcycle movement at the initial stage of contact with the car. At this stage, the most important forms of this movement include rotation of the motorcycle around a variably located instantaneous centre and lifting of the rear end of the motorcycle. Based on an analysis (frame-by-frame) of the video record of the experiment and the acceleration values measured on the motorcycle frame, the parameters of motorcycle motion were determined for specific time instants. The trajectories of noteworthy motorcycle points after the motorcycle impact against the car have been shown. The parameters of motorcycle motion as determined from the experiment may provide a good basis for the road accident reconstruction process and for the analysis of the course of generation of injuries to motorcyclist's body. The course of the process of motorcycle rotation and lifting has crucial influence on the movement of motorcyclist's body and especially on the point of impact of motorcyclist's head against the car. The location of this point (side window, roof edge, roof panel) is critical for the type of the head injuries resulting from the accident.
Przedstawiono analizę przebiegu wypadku drogowego polegającego na uderzeniu motocykla w bok samochodu osobowego. Obszar analizy został ograniczony do pozderzeniowego ruchu motocykla w początkowej fazie kontaktu z samochodem. Wówczas jedną z ważnych form ruchu jest obrót motocykla wokół chwilowego środka o zmiennym położeniu oraz unoszenie jego tyłu. Na podstawie analizy filmu z eksperymentu (metodą klatka po klatce) oraz pomierzonych wartości przyspieszeń na ramie motocykla określono parametry tego ruchu w poszczególnych chwilach czasu. Pokazano trajektorię ruchu charakterystycznych punktów motocykla po jego uderzeniu w samochód. Wyznaczone parametry ruchu motocykla stanowić mogą dobrą podstawę do procesu rekonstrukcji wypadków drogowych i analizy powstawania obrażeń u motocyklisty. Przebieg procesu obracania i unoszenia motocykla ma zasadniczy wpływ na ruch ciała motocyklisty, a przede wszystkim na miejsce uderzenia jego głowy w samochód. Położenie tego miejsca (szyba boczna, krawędź dachu, dach) silnie wpływa na charakter obrażeń głowy, które powstają w czasie wypadku.
Źródło:
Archiwum Motoryzacji; 2012, 4; 13-29
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problem with determining the vehicle impact velocity for car bodies breaking apart
Autorzy:
Aleksandrowicz, Piotr
Aleksandrowicz, Iwo
Kukiełka, Krzysztof
Patyk, Radosław
Stanowski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2203902.pdf
Data publikacji:
2022
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
impact velocity
crash into a tree
body breaking apart
prędkość uderzenia
uderzenie w drzewo
rozerwanie ciała
Opis:
This article investigates the impact of a passenger car on a tree, which resulted in the car body breaking apart. A side impact of the car on a tree at high driving speeds is not a standard test in the provisions of the applicable Directives of the European Economic Community, even though the impact poses a serious threat to the driver and the passengers. The threat comes from a deep impaction of the barrier into the body which damages the safety cage. For such impacts, it is very difficult for the vehicle speed to be reconstructed. In practice, expert witnesses and appraisers usually disregard the bodybreaking-apart-related energy due to a difficulty in establishing the data for such calculations, which leads to simplifications and speed underestimates. Performing the right simulation of such impacts with accident reconstruction programs without determining the adequate input data for calculations is also impossible to calculate. This paper presents a range of studies and calculations for such incidents and for identifying the input parameters for collision simulations. The approach presented in this article should be used by expert witnesses and researchers. Therefore, this paper provides insights into theory and practice.
Źródło:
Transport Problems; 2022, 17, 3; 75--86
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Funkcja ochronna bariery drogowej a pochłanianie energii uderzenia samochodu
Protective function of the road barrier and the car impact energy absorption
Autorzy:
Prochowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/263653.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
bariera drogowa
energia uderzenia
uderzenie samochodu
wypadek samochodowy
car accident
car hitting
impact energy
road barrier
Opis:
W artykule dokonano analizy procesu wypełniania funkcji ochronnej przez bariery w ruchu drogowym, czyli odpowiedniego oddziaływania na pojazd, który uderzył w barierę oraz jednoczesnego pochłaniania energii uderzenia tego samochodu. Rozważano zagadnienie absorbowania (przez barierę) części energii kinetycznej uderzającego samochodu w skojarzeniu z przesunięciem poprzecznym bariery, jako skutkiem uderzenia. Przedstawiono obliczenia energii uderzenia i pracy przesunięcia bariery. Uzyskano liczbowe oszacowanie udziału pracy przesunięcia bariery w ogólnym bilansie energii uderzenia samochodu kategorii M1, z segmentu handlowego B i C, czyli samochodów dominujących w ruchu drogowym. Obliczenia wykonano dla betonowych barier drogowych, ustawianych na różnych podłożach. Wyznaczono analityczne zależności energii rozpraszanej na przesunięcie bariery od kata i energii uderzenia samochodów z segmentów handlowych B i C. Odnoszą się one do różnorodnych podłoży, co umożliwia ich praktyczne wykorzystanie podczas planowania ustawiania barier i analizy zagrożeń bezpieczeństwa ruchu drogowego.
The analysis of the protective function of the barrier in the road traffic has been performed. Proper influence on a car hitting the barrier and simultaneous absorption of the impact energy has been analyzed. The issue of absorption (by the barrier) of kinetic energy generated by a hitting car has been considered in relations to the transverse barrier displacement as a result of collision. Calculations of the impact energy and the barrier displacement work have been presented. Numerical estimation of the share of the barrier displacement work in a general impact energy balance for the M1 category cars, commercial segment B and C, i.e., the most common cars in the road traffic, has been obtained. Calculations have been performed for the concrete road barriers placed on different grounds. Analytical dependences of energy dissipated by the barrier displacement on the impact angle and energy of the cars from commercial segments B and C have been determined. They refer to various grounds and allow for practical use when planning barrier arrangement and analyzing road traffic safety issues.
Źródło:
Archiwum Motoryzacji; 2010, 4; 263-278
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Test Velocity on the Specific Energy Absorption under Progressive Crushing of Composite Tubes
Autorzy:
Ryzińska, Grażyna
Gieleta, Roman
Powiązania:
https://bibliotekanauki.pl/articles/102741.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
CFRP
energy absorption
progressive crushing
crashworthiness
SHPB
velocity
pochłanianie energii
stopniowe kruszenie
odporność na uderzenia
prędkość
Opis:
The paper presents the results of the compression tests for carbon-epoxy composites in order to assess the amount of energy absorbed depending on the process velocity and content of axial fibres. Two types of prepreg (UD 200 g/m2 and woven 160 g/m2) were used to prepare the specimens with a diameter of 20 mm and a height of 34 mm. The specimens were subjected to compression under various speed conditions (static, dynamic and SHPB tests). The calculated specific energy absorption values showed a 50–60% decrease with increasing process velocity and depending on the type of specimens architecture. The highest energy values were absorbed by the specimens with the highest share of axial fibres in the sample.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 94-102
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deceleration and deformation during dynamic load of model longitudinals – real conditions and simulation
Autorzy:
Hadryś, D.
Kubik, A.
Stanik, Z.
Łazarz, B.
Powiązania:
https://bibliotekanauki.pl/articles/198624.pdf
Data publikacji:
2019
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
longitudinal
passive safety
impact energy
dynamic load
simulation
podłużna
bezpieczeństwo bierne
energia uderzenia
dynamiczne ładowanie
symulacja
Opis:
The manner and degree of taking over impact energy by the passive safety elements of the vehicle body is the basis for providing conditions for the survival of people using the means of transport (driver and passengers). The elements specially designed for this purpose in the self-supporting body are longitudinals. Their energy-absorbing properties are designed by using a specific shape, by using appropriate connections of their components and by choosing the right material. Determining the degree to which the vehicle (body) ensures safety during collision requires testing. The most complex and expensive tests are the ones carried out on a complete real object (whole vehicle). The solution worth considering is a bench test of individual body elements designed as energy-consuming (for example, longitudinals). In addition, it is also possible to carry out computer simulations in this area. The purpose of this article was to present and compare the results of dynamic studies on model energy-consuming real objects and compare the results obtained this way with the results of computer simulation in the same range. The scope of work was adopted on this basis: passive safety, model energy-absorbing elements of steel self-supporting vehicle body, dynamic tests, computer simulations. For the purpose of this study, a model of vehicle passive safety elements (model longitudinals) was designed for which dynamic tests were carried out on a specially designed test stand (speed of the hammer was up to 9.7 m/s, impact energy was up to 23.6 kJ). This test stand enabled registration of the deceleration during impact and deformation of the tested object. Next, computer simulations were carried out for geometrically and material-identical models. On the basis of the conducted tests, it was found that it is worth considering the replacement of collision tests of the whole vehicle by tests of its individual components. These tests can also be supported by computer simulations.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2019, 102; 53-64
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recommendation for the design of composite covers which protect the chassis of a rail vehicle
Autorzy:
Juzuń, Mateusz
Cholewa, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/2146633.pdf
Data publikacji:
2020
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
composite covers
vibroacoustic insulation of composite covers
impact resistance
pokrywy kompozytowe
izolacja wibroakustyczna
odporność na uderzenia
Opis:
Fragments of research to formulate criteria allowing for the rational design of covers to protect against the destructive impact effects of small, sharp elements, are discussed. The motivation for this research was the result of the analysis of damage to composite covers which protect the chassis of a modern traction vehicle, moving at high speed on Polish railway routes. Such covers must have appropriate strength properties and high surface resistance to external damage, while limiting the influence of the impact of foreign elements on the cover, and the impact of external sources of noise and vibrations on the interior of the vehicle. They have a sandwich structure and are made of a polymer composite. General guidelines for the design of covers having the required properties are not known. A method of analyzing the resistance of the cover to damage associated with the impact of elements with sharp edges and irregular shapes, using the LS-Dyna software, has been proposed. For the needs of the proposed method, a general model of the cover structure has been introduced. The assumptions adopted in determining the field of possible solutions are discussed. Particular attention is paid to the required structure of the cover, allowing for the differentiation of its properties observed in the longitudinal and transverse directions of the vehicle. Selected conclusions resulting from the research carried out so far, are presented.
Źródło:
Vibrations in Physical Systems; 2020, 31, 1; art. no. 2020107
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the Energy of Destruction of Bindings of a Core and Moulding Sand Based on Quartz Sand Grains
Autorzy:
Dańko, R.
Dajczer, G.
Powiązania:
https://bibliotekanauki.pl/articles/383164.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
moulding sand
deformation energy
impact resistance
tensile strength
masa formierska
odkształcenia
odporność na uderzenia
wytrzymałość na rozciąganie
Opis:
In the knock-out process, as well as in the preliminary phase of moulding sand reclamation, the issue of energy demand for the process of crushing used sand agglutinations, preferably to single grains, is particularly important. At present, numerical values of moulding sand impact resistance, which would allow energy-related aspects of this process to be forecast, are not known, as such research has not been carried out. It seems that impact resistance tested on very small cross-section samples, which allows us to very precisely reveal some unique features of a moulding sand with organic and inorganic binders, is an important parameter, which so far has not been taken into account for evaluation of mechanical properties of moulding sands. Preliminary attempts to determine impact resistance of moulding sands have been carried out as part of own research of the author. The conducted investigations aimed at determining the relationships between the obtained values of tensile strength and impact resistance of moulding sands. In addition, the effect of holding samples at temperatures of 100oC, 200oC, 300oC on the value of impact resistance was determined, both for sands made with fresh and with reclaimed sand grains.
Źródło:
Archives of Foundry Engineering; 2018, 18, 1; 19-22
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in Impact Strength and Abrasive Wear Resistance of Cast High Manganese Steel Due to the Formation of Primary Titanium Carbides
Autorzy:
Tęcza, G.
Zapała, R.
Powiązania:
https://bibliotekanauki.pl/articles/383189.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-manganese steel
microstructure
primary carbides
microhardness
impact strength
abrasion
stal wysokomanganowa
mikrostruktura
węgliki
mikrotwardość
siła uderzenia
Opis:
Cast high-manganese Hadfield steel is commonly used for machine components operating under dynamic load conditions. Their high fracture toughness and abrasive wear resistance is the result of an austenitic structure, which - while being ductile - at the same time tends to surface harden under the effect of cold work. Absence of dynamic loads (e.g. in the case of sand abrasion) causes rapid and premature wear of parts. In order to improve the abrasive wear resistance of cast high-manganese steel for operation under the conditions free from dynamic loads, primary titanium carbides are produced in this cast steel during melting process to obtain in castings, after melt solidification, the microstructure consisting of an austenitic matrix and primary carbides uniformly distributed therein. After heat treatment, the microhardness of the austenitic matrix of such cast steel is up to 580 μHV20 and the resulting carbides may reach even 4000 μHV20. The impact strength of this cast steel varies from 57 to 129 and it decreases with titanium content. Compared to common cast Hadfield steel, the abrasive wear resistance determined in Miller test is at least twice as high for the 0.4% Ti alloy and continues growing with titanium content.
Źródło:
Archives of Foundry Engineering; 2018, 18, 1; 119-122
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Impact Resistance on a Knitted Prosthesis Based on Polypropylene and Acrylic Cements Based on Poly(methyl methacrylate)
Porównanie odporności na uderzenia dzianej protezy wykonanej z polipropylenu oraz cementu akrylowego na bazie poli(metakrylanu metylu)
Autorzy:
Sujka, Witold
Draczyński, Zbigniew
Rutkowski, Jacek
Karbowski, Krzysztof
Gąsiorowski, Tomasz
Kasprzak, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/231949.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
cranioplasty material
acrylic cements
drop tower
impact resistance
materiał kranioplastyczny
cementy akrylowe
wieża opadowa
odporność na uderzenia
Opis:
The aim of the study was to compare the physical and mechanical properties of known prostheses for cranioplasty: knitted Codubix based on polypropylene and Modela-cryl resin based on PMMA. It was expected that the study would allow to check whether it is possible to combine their properties, which should enable the preparation of a new material with properties combining the best features of both components. Physico-chemical and mechanical properties were evaluated. It was found that the two materials meet the requirements for chemical purity, ensuring the safety of their use. Regarding the mechanical properties, the energy of impact diffusion for two types of prostheses was determined applying the Drop Tower technique. The polymerisation heat of Modela-cryl resin was determined in real time using the DSC technique.
Celem pracy było porównanie właściwości fizycznych i mechanicznych znanych protez do kranioplastyki: dzianej Codubix na bazie polipropylenu i żywicy Modela-cryl na bazie PMMA. Oczekiwano, że badanie pozwoli sprawdzić, czy możliwe jest połączenie ich właściwości, co powinno pozwolić na przygotowanie nowego materiału o właściwościach łączących najlepsze cechy obu komponentów. Oceniono właściwości fizykochemiczne i mechaniczne. Stwierdzono, że oba materiały spełniają wymagania czystości chemicznej, zapewniając bezpieczeństwo ich stosowania. Jeśli chodzi o właściwości mechaniczne, określono energię dyfuzji uderzeniowej dla dwóch typów protez przy użyciu techniki Drop Tower. Określono ciepło polimeryzacji żywicy Modela-cryl w czasie rzeczywistym za pomocą techniki DSC.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 6 (138); 67-74
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact strength of squeeze casting AlSi13Cu2–CF composite
Autorzy:
Zyska, A.
Konopka, Z.
Łągiewka, M.
Powiązania:
https://bibliotekanauki.pl/articles/946862.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting composites
squeeze method
carbon fibers
impact strength
microstructure
kompozyty
metoda wyciskania
włókna węglowe
siła uderzenia
mikrostruktura
Opis:
The paper presents the results of research on microstructure and impact strength of AlSi13Cu2 matrix composite reinforced by Ni-coating carbon fibers (CF) with a volume fraction of 5%, 10% and 15%. The composite suspensions were prepared using by stirring method and subsequently squeeze casted under different pressures of 25, 50, 75 and 100 MPa. As part of the study, fiber distribution in aluminum matrix was evaluated and variation in impact strength of composite as a function of the carbon fibers volume fraction and pressure applied were determined. It has been found that the presence of Ni coating on carbon fibers clearly improves their wettability by liquid aluminum alloy and in combination with the stirring parameters applied, composite material with relatively homogeneous structure can be produced. Charpy's test showed that the impact strength of composite reaches the highest value by carrying out the squeeze casting process at 75 MPa. In the next stage of research, it was found that the impact strength of composites increases with the increase of carbon fibers volume fraction and for 15% of fibers is close to 8 J/cm2. Observations of fracture surfaces have revealed that crack growth in the composites propagates with a quasi-cleavage mechanism. During the creation of the fracture, all fibers arranged perpendicular to its surface were sheared. At the same time, the metal matrix around the fibers deformed plastically creating characteristic ductile breaks. The fracture surface formation through the fibers indicates a cohesive and strong connection of the reinforcement with the matrix. In addition to the phenomena mentioned, debonding the fiber-matrix interfaces and the formation of voids between components were observed on the fracture surface.
Źródło:
Archives of Foundry Engineering; 2020, 20, 2; 49-52
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deceleration and deformation during dynamic loading of model car body parts after post-accident repair
Autorzy:
Hadryś, Damian
Kubik, Andrzej
Stanik, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/1841191.pdf
Data publikacji:
2020
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
longitudinal model
post-accident repair
passive safety
impact energy
model podłużny
naprawa powypadkowa
bezpieczeństwo bierne
energia uderzenia
Opis:
Absorption of impact energy by the passive safety elements of the vehicle body is the basic feature to ensure conditions of safety for the driver and passengers in transport. The parts especially designed for this objective in the self-supporting car body are longitudinals. Their energy-absorbing features are designed in different ways. Evaluation of the degree to which the vehicle (body) ensures safety during a collision is difficult and expensive. Usually, tests under impact conditions are required. The most advanced and costly are the tests carried out on a complete vehicle (whole real object for tests). Whole vehicle testing can be replaced by testing of individual car body elements (for example longitudinal). The main aim of this article is to present and compare the results of dynamic studies on model energy-consuming objects (new model longitudinals and model longitudinals repaired with welding methods). For the purpose of this study, models of vehicle passive safety elements (model longitudinals) were designed. On the basis of the conducted tests, it was found that it is worth considering the replacement of collision tests of the whole vehicle by tests of its individual components. This can be considered a new approach that is not widely used. Currently, most often, crash tests of entire vehicles are conducted (high costs) or computer simulations are performer (often with unsatisfactory accuracy).
Źródło:
Transport Problems; 2020, 15, 3; 5-16
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polska chce parasola : Scharping musiał w Warszawie uspokajać polityków zaniepokojonych stanowiskiem Niemiec
Autorzy:
Ludwig, Michael.
Powiązania:
Forum 1998, nr 51/52, s. 4
Współwytwórcy:
(jm). Tłumaczenie
Data publikacji:
1998
Tematy:
NATO strategia projekty
Strategia obronna projekty NATO
Bezpieczeństwo międzynarodowe
Strategia uderzenia atomowego projekty NATO
Bezpieczeństwo narodowe
Opis:
Tł. art. zamieszcz. w "Frankfurter Allgemeine Zeitung". -- 1998, 7 XII.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Experimental research on influence of gas impact on thermal and mechanical properties of auxetic material covered with titanium silicide coating
Autorzy:
Miedzińska, D.
Gieleta, R.
Małek, E.
Zasada, D.
Stankiewicz, M.
Marszałek, K.
Powiązania:
https://bibliotekanauki.pl/articles/201182.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-Si layers
damage
impact
thermal resistance
SEM
auxetic materials
Ti-Si
uszkodzenia
uderzenia
opór cieplny
materiały auksetyczne
Opis:
The aim of the presented work was to study the auxetic textiles covered with titanium silicide coating. The research was carried out to develop the material structure, which will be used for protective clothing, e.g. for firemen. The new material should be characterized by increased heat resistance coupled with protection against gas pressure impact caused e.g. by gas installation damage. In the paper, an assessment of the change in heat resistance properties of a Ti-Si coated auxetic textile loaded with gas pressure impulse was carried out.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 2; 165-172
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Different Inoculants on Impact Toughness in High Chromium Cast Iron
Autorzy:
Siekaniec, D.
Kopyciński, D.
Guzik, E.
Tyrała, E.
Nowak, A.
Powiązania:
https://bibliotekanauki.pl/articles/383309.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
high chromium cast iron
inoculation
impact toughness
hardness
właściwości mechaniczne
żeliwo wysokochromowe
modyfikacja
odporność na uderzenia
twardość
Opis:
The present work, presented the study of effect of different inoculants on impact toughness in High Chromium Cast Iron. The molds were pouring in industrial conditions and samples were tested in laboratory in Faculty of Foundry Engineering at AGH. Seven samples were tested - one reference sample, three with different addition of Fe-Ti, and three with different addition of Al. The samples were subjected to impact toughness on Charpy hammer and the hardness test. The presented investigations indicate that for the each inoculant there is an optimal addition at which the sample obtained the highest value of impact toughness. For the Fe-Ti it is 0.66% and for Al is 0.17%. Of all the examined inoculants best results were obtained at a dose of 0.66% Fe-Ti. Titanium is a well-known as a good modifier but very interesting results gives the aluminum. Comparing the results obtained for the Fe-Ti and Al can be seen that in the case of aluminum hardness is more stable. The hardness of all samples is around 40-45 HRC, which is not high for this type of cast iron. Therefore, in future studies it is planned to carry out the heat treatment procedure that may improves hardness.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 85-88
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of injuries of a driver of a roll caged car sustained during a rollover crash
Analiza obrażeń doznanych przez kierowcę samochodu wyposażonego w klatkę bezpieczeństwa podczas dachowania
Autorzy:
Peliński, Jakub
Dymek, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/2201494.pdf
Data publikacji:
2020
Wydawca:
Politechnika Śląska. Katedra Biomechatroniki
Tematy:
środki ochrony przed urazami
klatka bezpieczeństwa
odporność na uderzenia
ATD
hybrid III
LS-DYNA
injury measures
roll cage
crashworthiness
Opis:
The aim of the study is to analyze the extent of injuries sustained by the driver during a crash rollover. A safety cage for 1996 Dodge Neon was designed following FIA guidelines as well as a seat. 50th percentile male HYBRID III ATD model was utilized. The crashworthiness of the test setup and verification of the injury measures were examined utilizing the Finite Elements Method in LS-DYNA software. Biomechanical injury measures that were investigated include neck normal and shear force and chest deflection.
Praca przedstawia badania dotyczące ustalenia rozległości obrażeń (Siła normalna oraz tnąca w odcinku szyjnym kręgosłupa oraz ugięcie klatki piersiowej) kierowcy samochodu wyposażonego w klatkę bezpieczeństwa podczas dachowania. Do symulacji został użyty model dyskretny 50 centylowego manekina Hybrid III. Test dachowania pojazdu (1996 Dodge Neon) został przeprowadzony przy użyciu Metody Elementów Skończonych w programie LS-DYNA.
Źródło:
Aktualne Problemy Biomechaniki; 2020, 19; 27--34
1898-763X
Pojawia się w:
Aktualne Problemy Biomechaniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Rare Earth Metals on Microstructure and Mechanical Properties of G20Mn5 Cast Steel
Autorzy:
Kasińska, J.
Powiązania:
https://bibliotekanauki.pl/articles/379581.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
G20Mn5
rare earth metals
modification
microstructure
impact toughness
metale ziem rzadkich
modyfikacja
mikrostruktura
odporność na uderzenia
Opis:
The paper describes influence of rare earth metals (REMs) on G20Mn5 cast steel microstructure and mechanical properties. The cerium mixture of the following composition was used to modify cast steel: 49.8% Ce, 21.8% La, 17.1% Nd, 5,5% Pr and 5.35% of REMs. Cast steel was melted in industrial conditions. Two melts of non-modified and modified cast steel were made. Test ingots were subject to heat treatment by hardening (920°C/water) and tempering (720°C/air). Heat treatment processes were also performed in industrial conditions. After cutting flashes off samples of cast steel were collected with purpose to analyze chemical composition, a tensile test and impact toughness tests were conducted and microstructure was subject to observations. Modification with use of mischmetal did not cause significant changes in cast steel tensile strength and yield strength, while higher values were detected for fractures in the Charpy impact test, as they were twice as high as values for the data included in the PN-EN 10213:2008 standard. Observations performed by means of light and scanning microscopy proved occurrence of significant differences in grain dimensions and morphology of non-metallic inclusions. Adding REMs resulted in grain fragmentation and transformed inclusion shapes to rounded ones. Chemical composition analyses indicated that round inclusions in modified cast steel were generally oxysulphides containing cerium and lanthanum. In the paper the author proved positive influence of modification on G20Mn5 cast steel mechanical properties.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 37-42
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Proposing Probabilistic Operational Risk Assessment Model for Textile Industry Using Bayesian Approach
Zaproponowanie modelu probabilistycznej oceny ryzyka operacyjnego dla przemysłu tekstylnego z wykorzystaniem podejścia bayesowskiego.
Autorzy:
Jan, M.
Khalid, M. S.
Awan, A. A.
Nisar, S.
Powiązania:
https://bibliotekanauki.pl/articles/234125.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
operational risk
probabilistic risk assessment model
probability
impacts
Bayesian approach
ryzyko operacyjne
probabilistyczny model oceny ryzyka
prawdopodobieństwo
uderzenia
podejście bayesowskie
Opis:
Accidents, operational failures and losses prompt authorities to highlight the importance of adequate systems and controls to deal with operational risk (OR). Therefore risk assessment methodology has become a dire need of major industries for undertaking valuable measured in production and operation’s research. The paper describes methodology for conducting the risk assessment of the textile operational domain in general i.e. developing a conceptual risk assessment framework and conducting the methodological implementation of the selected operational risk element using the approach proposed. The risk assessment model proposed embraces the concept of probabilistic risk assessment structural modeling using the Bayesian Approach in its generalised form that may be applied to specific textile operational settings with the definition of dimensions and scales for a specific textile environment. The generalised model proposed can also be applied to different textile industries with the insertion of real data for testing and validation. The OR prediction model proposed is GUI-based, scalable, expandable and can be tested for any textile operations with little modification in parentend nodes under the specific risk element. The paper is helpful to ensure safety and a pro-active approach in textile risk management and also contributes towards the sustainable development of industry operations in the future.
Wypadki, awarie i straty operacyjne skłaniają do podkreślenia znaczenia odpowiednich systemów i mechanizmów kontroli w celu radzenia sobie z ryzykiem operacyjnym (OR). W artykule opisano metodologię przeprowadzania oceny ryzyka w zakresie ogólnej działalności włókienniczej, tj. opracowanie ram koncepcyjnej oceny ryzyka i przeprowadzenie metodycznej realizacji wybranego elementu ryzyka operacyjnego z wykorzystaniem proponowanego podejścia. Proponowany model oceny ryzyka obejmuje koncepcję modelowania strukturalnego probabilistycznej oceny ryzyka z wykorzystaniem podejścia bayesowskiego w swojej uogólnionej formie, która może być stosowana do określonych ustawień operacyjnych wyrobów włókienniczych z definicją wymiarów i skal dla określonego środowiska włókienniczego. Proponowany ogólny model może również znaleźć zastosowanie w różnych branżach tekstylnych, wprowadzając rzeczywiste dane do testowania i walidacji. Proponowany model prognozowania OR, oparty na interfejsie GUI, jest skalowalny, rozszerzalny i może być zastosowany w przypadku dowolnych operacji z niewielkimi modyfikacjami w węzłach nadrzędnych/końcowych w ramach określonego elementu ryzyka. Dane zaprezentowane w artykule mogą być przydatne w zakresie zarządzania ryzykiem włókienniczym, a także wnoszą wkład do zrównoważonego rozwoju działalności przemysłowej w przyszłości.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 1 (127); 10-20
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multimetal Stahl 1018 Composite – Structure and Strength Properties
Autorzy:
Kalisz, D.
Arustmian, A.
Powiązania:
https://bibliotekanauki.pl/articles/1840916.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite Stahl 1018
strength properties
hardness
impact strength
yield point
kompozyt Stahl 1018
właściwości wytrzymałościowe
twardość
siła uderzenia
granica plastyczności
Opis:
The series of experiments was performed on commercial polymeric composite material MultimetalStahl 1018. Strength tests were performed to determine the yield point of the material. The composite had the highest hardness at a temperature of 20°C. Hardness and microhardness were determined in further experiments. The adhesiveness of the material to metal surfaces and impact strength were also analyzed. The scanning electron microscopy and X-ray microanalysis methods were used for analyzing the microstructure of the material. Chemical composition of selected areas was analyzed, which allowed for a preliminary identification of metallic elements content in the composite. The microstructure of composite is highly non-homogeneous and particular phases are highly elongated and angular. The analyzed phase was enriched with silicon, aluminium, magnesium, iron and vanadium other phases enriched with metallic elements, e.g. molybdenum, titanium, vanadium and also oxygen as well as traces of cadmium and chromium. The results were presented in the form of photos and illustrations. The results confirmed the applicability of the composite as a binder for fixing mechanical and foundry devices.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 77-82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Udarność kompozytowych powłok z tkaniną aramidową na podłożu stalowym
Autorzy:
Mayer, P.
Pach, J.
Powiązania:
https://bibliotekanauki.pl/articles/1190016.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
powłoka kompozytowa
powłoka polimerowa
podłoże stalowe
odporność na uderzenia
powłoka wielowarstwowa
composite coating
polymer coating
steel
impact resistant of coatings
multilayer coating
Opis:
The article presents the results of impact composite coatings on the thermoplastic matrix with varying amounts of aramid fabrics. To prepare composite coatings applied thermoplastic copolymer of SBS (styrenebutadiene- styrene) with a linear chain, trade name Kraton. To reinforcement selected aramid fabric (Twaron 1210 fiber), a plain weave and a weight of 175 g / m2. As the base polymer coatings used steel sheet with a thickness of 1.0 mm marked with DC01 according to EN 10027-1: 2007. It is a quality steel alloy designed for cold-rolled products. Steel substrate were washed in a solution of water and detergent, and then degreased with acetone. First step was compressed at 180 ° C for 3 minutes without load, and then three minutes with a load of 2 MPa. SBS copolymer film having a thickness of 800 μm. The films again were compressed with fabrics on steel substrate, using the same compression parameters as in the case of a single film. Obtained four reinforced with fabric layers differing in number of layers of fabric and two SBS copolymer coating with different thickness. Impact resistance test consisted of placing the sample of 100 x 100 mm in the base device, and then leaving from the height of 1 meter, a weight of 2 kg terminated spherical indenter having a diameter of 20 mm. All samples from a single impact energy of 19.62 J were subjected to microscopic analysis. The first step was to determine the number of impact, after which the steel substrate coating has been without a break. Then carried out research on coatings by measuring the amount of impact, which was interrupted after the structure of the coating and the steel substrate. As a result of the study, there was no linear relationship between the thickness of coatings and their impact resistance. A significant influence on the resulting damage after an impact is the amount of fabric coating.
Źródło:
Interdisciplinary Journal of Engineering Sciences; 2016, 4, 1; 6--10
2300-5874
Pojawia się w:
Interdisciplinary Journal of Engineering Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Centrifugal Shot Peening Parameters on the Impact Force and Surface Roughness of EN-AW 2024 Aluminum Alloy Elements
Autorzy:
Skoczylas, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/2024196.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
surface roughness
impact force
centrifugal shot peening
EN-AW 2024 aluminum alloy
chropowatość powierzchni
siła uderzenia
kulowanie odśrodkowe
stop aluminium EN-AW 2024
Opis:
This article presents the results of experimental studies on the influence of centrifugal shot peening parameters on the impact force Fu occurring during the machining of the EN – AW 2024 aluminum alloy. The surface roughness parameters Ra, Rt, Rpk, Rvk and surface topography were also analyzed. Centrifugal shot peening was carried out on the FV-580a vertical machining center using a centrifugal shot peening head. Variable parameters of the centrifugal shot peening were: tangential speed vg and infeed g. On the basis of the results obtained, it was found that the increase the tangential speed vg and the infeed g causes an increase of the impact force. After centrifugal shot peening, numerous micro-cavities were formed on the surface of the EN-AW 2024 aluminum alloy samples, which may can accumulate lubricants in their space. During centrifugal shot peening, low values impact force Fu were obtained, which confirms the legitimacy of using this method as a finishing machining of elements with low stiffness.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 1; 71-78
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic splitting tensile performance of new and old concrete after high temperature treatment
Autorzy:
Cao, Hai
Powiązania:
https://bibliotekanauki.pl/articles/2033990.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton nowy
beton stary
SHPB
dynamic splitting tensile performance
prędkość uderzenia
temperatura
new concrete
old concrete
split Hopkinson pressure bar
impact velocity
temperature
Opis:
In order to study the dynamic splitting tensile properties of new and old concrete after high temperature treatment, the effects of different impact velocities and temperatures on failure modes, dynamic splitting strength and energy absorption of new and old concrete were analyzed by impact dynamic splitting tensile test use of variable cross-section Φ 74 mm split Hopkinson pressure bar apparatus. The results show that: Impact velocity and temperature not only affect the dynamic splitting strength of new and old concrete bonding specimens, but also affect the failure modes and degree of breakage. The dynamic splitting strength of new and old concrete increases with the increase of impact velocity, but the increase rate decreased with the increase of temperature. The dynamic splitting strength first increases slowly and then decreases dramatically with the increase of temperature. In the dynamic splitting test of new and old concrete, the energy absorption increases with the increase of impact velocity and decreases with the increase of temperature.
Źródło:
Archives of Civil Engineering; 2021, 67, 4; 79-89
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie charakterystyk powstrzymywania pojazdów przez bariery drogowe spełniające kryteria badań zderzeniowych
Shaping the characteristics of the vehicle restraint by road barriers fulfill the criteria of the impact tests
Autorzy:
Fligiel, M.
Powiązania:
https://bibliotekanauki.pl/articles/311285.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
badania zderzeniowe
energia uderzenia
bariera drogowa
system ograniczający drogę
ASI
THIV
PHD
crash tests
impact energy
road barriers
road restraint system
characteristics of vehicle restraint
Opis:
W pracy rozpatruje się jeden z czynników fizycznych (przyspieszenie, opóźnienie) wpływających w znacznym stopniu na utratę zdrowia pasażerów pojazdów samochodowych. Przedstawiono metodę obniżenia poziomu przyspieszeń, poprzez zastosowanie w barierach o małej podatności układu sprężystego akumulującego energię uderzenia pojazdu, a tym samym obniżenia przyspieszenia (opóźnienia). W przedstawionej metodzie uwzględnia się zalecenia dotyczące poziomu powstrzymywania barier spełniających kryteria badań zderzeniowych.
The subject of the publication concerns the analysis of stages of vehicle body deformation in frontal collision for the characteristics of delay, speed and deformation of the vehicle. The course of the collision was divided into stages, whose boundaries are determined by the characteristic intervals.. In the work one of the physical factors (acceleration or delay), which influence significantly on the loss of the health of passengers vehicles, is considered. A method of reducing the level of acceleration is presented. In the barriers with low system compliance is used an accumulating elastic energy system of the vehicle impact and thereby reduced acceleration (delay). In the presented method, the recommendations on the containment level barriers to meet the criteria of the impact tests are taken into account.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 7-8; 175-180
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modyfikacje procedur obliczeniowych w metodach uderzenia hydraulicznego i młynków hydrometrycznych wykorzystywanych do pomiaru natężenia przepływu w elektrowniach wodnych
Modifications of the flow rate calculation procedures in the application of the pressure-time method and the current meters method in hydropower plants
Autorzy:
Adamkowski, A.
Krzemianowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/151601.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiar natężenia przepływu
metoda uderzenia hydraulicznego
metoda Gibsona
metoda młynków hydrometrycznych
badania turbin wodnych
discharge measurement
pressure-time method
current meter method
hydraulic turbines measurement
Opis:
Metody uderzenia hydraulicznego i młynków hydrometrycznych są najczęściej używane do pomiaru natężenia przepływu podczas badań energetycznych turbin wodnych. Liczne doświadczenia w stosowaniu ww. metod pomiaru były przesłanką do wprowadzenia nowych elementów, które udoskonalają sposoby całkowania zmierzonych wielkości w procedurach obliczania natężenia przepływu. Modyfikacje te mają na celu poprawę dokładności pomiaru natężenia przepływu rozważanymi metodami.
The hydraulic current meters method and pressure-time method are most commonly used in measuring of the hydraulic turbines. Gained experience in application both mentioned methods in flow rate measurements was basis for the introduction into them new elements that are supposed to improve the accuracy of integration of the measured values. For the pressure-time method, in comparison to the IEC 60041 standard, the calculation procedure has been changed by introducing modifications that concern: (1) the procedure for calculating the hydraulic losses, and (2) determining the upper limit of integration. For current meter method, the calculation procedure has also been changed by introducing modifications that concern: (1) the boundary layer calculated by means of von Karman formula in which some parameters have been introduced instead of the recommended by the ISO 3354 standard, and (2) the way of integrating of the measured velocity field in which NURBS have been applied that allow to avoid some improper shapes of the interpolated profiles. New procedure is compared with other procedures – (1) compatible with ISO 3354, and (2) based on the natural cubic splines. Assessment of the two modified methods was based on the results of the simultaneous flow rate measurement in Polish hydropower plant equipped with Kaplan turbines with penstocks (Fig. 5). The comparison of the results confirmed the validity of new elements introduced to the procedures (Fig. 6).
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 12, 12; 1104-1108
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect Of Strain Rate On The Mechanical Properties And Microstructure Of The High-Mn Steel After Dynamic Deformation Tests
Wpływ prędkości odkształcenia na właściwości i strukturę stali wysokomanganowej po testach deformacji dynamicznej
Autorzy:
Jabłońska, M. B.
Śmiglewicz, A.
Niewielski, G.
Powiązania:
https://bibliotekanauki.pl/articles/958229.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-manganese steel
dynamic deformation test
strain rate
impact strength
mechanical twinning
structure
stal wysokomanganowa
testy deformacji dynamicznej
prędkość odkształcenia
siła uderzenia
bliźniakowanie mechaniczne
struktura
Opis:
The paper presents results of dynamic tensile investigations of high-manganese Fe – 20 wt.% Mn – 3 wt.% Al – 3 wt.% Si – 0.2 wt.% steel. The research was carried out on a flywheel machine, which enables to perform dynamic tensile tests and impact bending with a linear velocity of the enforcing element in the range of 5÷40 m/s. It was found that the studied steel was characterized by very good mechanical properties. Strength of the tested materials was determined in the static tensile test and dynamic deformation test, while its hardness was measured with the Vickers hardness test method. The surface of fractures that were created in the areas where the sample was torn were analyzed. These fractures indicate the presence of transcrystalline ductile fractures. Fractographic tests were performed with the use of a scanning electron microscope. The structure was analyzed by light optical microscopy. Substructure studies revealed occurrence of mechanical twinning induced by high strain rates. A detailed analysis of the structure was performed with the use of a transmission scanning electron microscope STEM.
W pracy przedstawiono wyniki wstępnych badań dynamicznego rozciągania wysokomanganowej stali gatunku X20MnAlSi16-3-3. Badania przeprowadzono na młocie rotacyjnym, który posiada możliwość realizacji prób dynamicznego rozciągania i udarowego zginania w zakresie prędkości liniowej elementu wymuszającego od 5÷40 m/s. Badana stal charakteryzuje się bardzo dobrymi właściwościami mechanicznymi. Wyniki badań uzyskano na podstawie statycznej próby rozciągania, próby dynamicznego rozciągania na młocie rotacyjnym oraz pomiaru twardości metodą Vickersa. Przeanalizowano powierzchnie przełomów powstałych w miejscu zerwania podczas prób rozciągania, które wskazują na obecność przełomów transkrystalicznych ciągliwych. Badania strukturalne wykonano z wykorzystaniem techniki mikroskopii świetlnej, skaningowej mikroskopii elektronowej i skaningowej transmisyjnej mikroskopii elektronowej. Przeprowadzone badania substruktury ujawniły obecność mechanizmu bliźniakowania mechanicznego, indukowanego w warunkach dużych prędkości odkształcenia.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 577-580
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the resistance of concrete hollow thin-walled high piers to rock collisions
Autorzy:
Huang, Yao
Powiązania:
https://bibliotekanauki.pl/articles/27312168.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
podpora betonowa
filar mostowy
element cienkościenny
zderzenie
skała
siła uderzenia
uszkodzenie
odporność na kolizje
concrete pier
thin-walled element
rock
collision
collision force
damage
collision resistance
Opis:
Concrete hollow thin-walled high piers (CHTWHPs) located in mountainous areas may be destroyed by the huge impact force of accidental rocks. The study focuses on analyzing the effects of rock impact on the pier, including its impact force, pier damage, dynamic response, and energy dissipation characteristics. The results show that: (1) Increasing the impact height led to a decrease in the peak impact force. Specifically, 15.5% decrease in the peak collision force is induced when the height of rock collision rises from 10 m to 40 m. (2) The damage mode of the pier’s collision surface is mainly oval damage with symmetrical center, radial damage on the side surface, and corner shear failure on the cross section. (3) The peak displacement of bridge pier increases with the increase of collision height. As the collision height increased from 10 m to 40 m, the bridge pier’s peak displacement also increased, rising by 104.2%. (4) The concrete internal energy gradually decreased with increasing collision height, dropping by 36.9% when the height of rock collision rises from 10 m to 40 m. The reinforcement internal energy showed an increase of 78%. The results of this study may provide reference for the rock collision resistance design of CHTWHPs.
Źródło:
Archives of Civil Engineering; 2023, 69, 3; 187--197
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Stab Protection Properties of Aramid Fibre-Reinforced 3D Printed Elements
Badanie właściwości ochrony przed przekłuciem elementów drukowanych 3D wzmocnionych włóknem aramidowym
Autorzy:
Sitotaw, Dereje Berihun
Ahrendt, Dustin
Kyosev, Yordan
Kabish, Abera Kechi
Powiązania:
https://bibliotekanauki.pl/articles/1419713.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
stab protection armor
3D printing
printed scales
impact energy
penetration depth
fibre-reinforcement
aramid
pancerz ochronny
druk 3D
łuski
energia uderzenia
głębokość penetracji
wzmocnienie włóknem
Opis:
A stab resistant vest is a reinforced piece of body armour designed to resist knife or needle attacks of different energy levels specifically to the upper part of the body (chest and abdomen) to save lives. The majority of armours limit several comfort parameters, such as free locomotion, respiration, flexibility and light weight, which determine efficient use by wearers and their willingness to wear. Currently available armours are usually made of a single plate, and although often segmentation is used with just a few but still quite large pieces, the materials are compact and bulky to wear. In this study, stab protective armor elements (scale-like elements) of 3 mm thickness and 50 mm diameter were designed, produced (3D printed) and tested for performance. Aramid fibre was used for its strength, durability and process ability to develop protection elements at unidirectional and multidirectional filling angles during 3D printing. The specimens were tested according to VPAM KDIW 2004. The specimens designed and developed with multidirectional filling angles of aramid resist the puncturing energy level K1 (25 J) with a penetration depth less than the maximum allowed for the K1 energy level by VPAM. These specimens showed a high protection level of relative small thickness (3 mm) and light weight (6.57 grams for the estimated area A ≈ 1963.5 mm2) as compared to the currently certified armors for K1 (for example, the aluminum mass is 13.33 grams for 2 mm thickness and 50 mm diameter).
Kamizelka odporna na dźgnięcie to wzmocniony element kamizelki kuloodpornej zaprojektowany tak, aby był odporny na ataki nożem lub igłą, w szczególności w górnej części ciała (klatce piersiowej i brzuchu), tak aby ratować życie. Kamizelka taka powinna spełniać kilka parametrów komfortu, takich jak: swoboda poruszania się, oddychanie, elastyczność i niewielka waga, które decydują o efektywnym użytkowaniu przez użytkowników i ich chęci do noszenia. Obecnie dostępne kamizelki są zwykle wykonane z jednej płyty i chociaż często stosuje się segmentację z zaledwie kilkoma, ale wciąż dość dużymi elementami, materiały są zwarte i nieporęczne w noszeniu. W pracy zaprojektowano, wyprodukowano (wydrukowano w 3D) i przetestowano pod kątem wydajności elementy pancerza ochronnego (elementy przypominające łuski) o grubości 3 mm i średnicy 50 mm. Zastosowano włókno aramidowe ze względu na jego wytrzymałość, trwałość i zdolność do wytwarzania elementów zabezpieczających przy jednokierunkowych i wielokierunkowych kątach wypełnienia podczas druku 3D. Próbki badano zgodnie z VPAM KDIW 2004. Stwierdzono, że zaprojektowane i opracowane próbki były odporne na poziom energii przebicia K1 (25 J) przy głębokości penetracji mniejszej, niż maksymalna dopuszczalna dla poziomu energii K1 przez VPAM. Próbki te wykazały wysoki poziom ochrony przy stosunkowo małej grubości (3 mm) i niewielkiej wadze (6.57 g dla szacowanego obszaru A ≈ 1963.5 mm2) w porównaniu z obecnie certyfikowanymi pancerzami dla K1 (np.: masa aluminium wynosi 13,33 g dla grubości 2 mm i średnicy 50 mm).
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 3 (147); 67-73
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko badawcze do kontrolowanych testów udarowych płyt kompozytowych
Experimental test rig for the controlled impact tests of composite plates
Autorzy:
Katunin, A.
Sznura, M.
Powiązania:
https://bibliotekanauki.pl/articles/270496.pdf
Data publikacji:
2013
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
badanie udarowe
uszkodzenia udarowe kompozytów
symulacja rzeczywistych uszkodzeń udarowych
kontrola energii uderzenia
impact tests
impact damages of composites
simulation of realistic impact damages
control of impact energy
Opis:
Artykuł opisuje stanowisko badawcze do testów udarowych płyt kompozytowych, pozwalających na automatyczną kontrolę energii uderzenia oraz symulację rzeczywistych uszkodzeń w płytach kompozytowych. Stanowisko zostało wyposażone w układy elektroniczne pozwalające na automatyczny dobór optymalnej wysokości zrzutu oraz obciążenia w szerokim zakresie energii uderzenia. Zestaw 14 impaktorów pozwala na przeprowadzenie zarówno klasycznych testów udarowych, jak i symulowanie uderzeń występujących w lotnictwie. Do pomiaru prędkości kolumny udarowej wykorzystano mikroprocesorowe układy pomiarowe, a pomiar siły uderzenia jest realizowany przy pomocy specjalistycznego czujnika piezoelektrycznego. Przedstawiono możliwości badawcze stanowiska oraz przykładowe wyniki badań.
The paper describes an experimental test rig for impact testing of composite plates, which makes possible an automatic control of impact energy and simulation of realistic damages in composite plates. The test rig was equipped with electronic systems, which allow for automatic selection of optimal height of a drop and a loading in the wide range of impact energy. The set of 14 impactors allows for carrying out classical impact tests as well as simulation of impacts occurred in aircraft structures. For the measurement of impact column the microprocessor sensing systems were used, the measurement of the force of impact is realized by special piezoelectric sensor. The research capabilities of a test rig as well as exemplary results of tests were presented.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2013, 18, 4; 297-302
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of wrightia tinctoria nano seed fibers as a reinforcement in the preparation of epoxy-based composites
Autorzy:
Syed, Habibunnisa
Nerella, Ruben
Madduru, Sri Rama Chand
Reddy S, Raja Gopal
Powiązania:
https://bibliotekanauki.pl/articles/2175204.pdf
Data publikacji:
2022
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
wrightia tinctoria nano seed fibers
WTNSFs
plain epoxy composite
tensile
flexural
impact strength
water absorption
test
nanowłókna nasienne
kompozyt epoksydowy
rozciąganie
zginanie
siła uderzenia
testy
absorpcja wody
Opis:
Natural seed fiber reinforced composite materials are replacing many conventional ones because of their excellent properties, less weight, easy availability, etc. Composite materials are used in many areas because of their superior features. Mechanical property is one of the vital parameters for choosing the material. The current investigation has revealed an importance of recently well-known Wrightia tinctoria nano seed fibers (WTNSFs), which are extracted physically. Wrightia tinctoria nano seed fiber reinforced composite was prepared with the epoxy resin by hand layup method. Epoxy resin is easy to handle and available at low cost. Mechanical tests are conducted reinforced composites of plain epoxy and WTNSFs to obtain strength properties like tensile, flexural, impact. Water absorption tests also performed on composites. Here, the developed composites are easy to handle, offered economically, and used primarily in marine applications due to less water absorption and good wax content. A comprehensive description of different tests and the properties of WTNSFs are studied and compared with the other existing natural fibers. This work showed that 35% combination of WTNSFs reinforced epoxy matrix offers enhanced mechanical properties with minimum water absorption compared with plain epoxy composites.
Źródło:
Acta Innovations; 2022, 45; 5--17
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Textile Multilayered Systems with Magnetorheological Fluids for Potential Application in Multi-Threat Protections. Preliminary Stab - Resistance Studies
Materiały kompozytowe z cieczami magnetoreologicznymi do potencjalnego zastosowania w ochronie przed zróżnicowanymi zagrożeniami – wstępne badania odporności na przekłucie
Autorzy:
Olszewska, K.
Polak, J.
Zielińska, D.
Struszczyk, M. H.
Kucińska, I.
Wierzbicki, Ł.
Kozłowska, J.
Leonowicz, M.
Wiśniewski, A.
Powiązania:
https://bibliotekanauki.pl/articles/233188.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ballistic insert
magnetorheological fluid (MRF)
MRF/fabric composite
impact test
stab resistance
wkładka balistyczna
elastyczne pancerze
ciecz magnetoreologiczna (MRF)
MRF / tkanina kompozytowa
test na uderzenia
odporność na przekłucie
Opis:
The article presents the results of preliminary work carried out for flexible body armour systems designs which contained three types of magnetorheological fluid (MRFs). The stab resistance of the multilayered material systems with magnetorheological fluids were investigated. Tests were carried out on a newly built rig at the Faculty of Materials Science and Engineering, Warsaw University of Technology. Three different configurations of flexible body armour were made. It was found that samples of the multilayered material system containing MRF had lower depth of deformation by about 30% than the reference samples. The combination of MRFs with para-aramid woven fabrics in several usable forms and/or sheets of ultra-high molecular weight polyethylene fibres gives possibilities for obtaining new types of multi-layered systems protecting effectively against various kind of threats.
W niniejszym artykule zaprezentowano wyniki wstępnych prac przeprowadzonych dla elastycznych pancerzy, zawierających 3 typy cieczy magnetoreologicznej. Zbadano odporności na przekłucie układów materiałowych z cieczami MR. Testy przeprowadzono na nowo powstałym stanowisku na Wydziale Inżynierii Materiałowej, Politechniki Warszawskiej. Wykonano konstrukcje elastycznych pancerzy o trzech różnych konstrukcjach. Na podstawie wstępnych wyników stwierdzono, iż próbki zawierające ciecz magnetoreologiczną miały mniejszą głębokość deformacji o ok. 30 % niż odpowiadające im wzorce. Połączenie cieczy MR z tkaninami z włókien para-aramidowych i/lub z nietkanymi wyrobami z włókien polietylenowych stwarza możliwość uzyskania nowego typu kompozytów skutecznie chroniących przed różnego rodzaju zagrożeniami.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 5 (101); 112-116
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the Annealing Temperature on the Microstructure and Properties of Ausferritic Nodular Cast Iron
Autorzy:
Gumienny, G.
Klimek, L.
Kurowska, B.
Powiązania:
https://bibliotekanauki.pl/articles/383050.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting materials
innovative casting technologies
ausferritic cast iron
nodular cast iron
impact strength
annealing
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
żeliwo ausferrytyczne
żeliwo sferoidalne
siła uderzenia
wyżarzanie
Opis:
The paper presents the microstructure and selected properties of ausferritic nodular cast iron annealed at the temperature 520 and 550°C. This choice was dictated by the temperatures used in the practice of nitriding. Nodular graphite in cast iron was obtained with use of Inmold process. Cast iron containing molybdenum and copper ensuring obtaining an ausferrite in the cast iron matrix without the use of heat treatment of castings was tested. The effect of annealing temperature on the microstructure and the kind of fracture of the ausferritic nodular cast iron was presented. The effect of an annealing temperature on hardness, impact strength and the microhardness of ausferritic nodular cast iron matrix was shown too. The lamellar structure of phases in the cast iron matrix after annealing has been ascertained. There has been an increase in hardness of an annealed cast iron and microhardness of its matrix. The reduction in the impact strength of the cast iron annealed at 520 and 550°C was approximately 10-30%. Both an increase in the hardness of cast iron as well as an decrease in its impact strength is probably due to the separation of secondary carbides during the heat treatment.
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of dynamic processes of the system “Vehicle – Track” using the new method of vehicle wheel with metal scale
Badanie dynamicznych procesów zachodzących w układzie „pojazd-tor” z wykorzystaniem nowej metody dla kół z metalową łuską
Autorzy:
Bogdevičius, M.
Žygienė, R.
Powiązania:
https://bibliotekanauki.pl/articles/946078.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
rail-wheel interaction
spatial model of metal scale
contact area
impact force
friction force
vibration
oddziaływania koło–szyna
przestrzenny model łuski metalowej
obszar kontaktu
siła uderzenia
siła tarcia
wibracja
Opis:
Mathematical models of vehicle wheel with metal scales are introduced in this article. When analysing the interaction between vehicle wheel with a metal scale and rail in the system “Vehicle – Track”, the changes of the kinematic and dynamic parameters of the wheel and rail contact points in time are examined, depending on the height of the 2 mm metal scale, when the length of the metal scale is 100 mm and the speed of movement is V = 40 - 100 km/h. The results obtained after the research of the system “Vehicle – Track”, when the wheel has a metal scale, help to better understand and evaluate the impact of metal scale on wheel on dynamic loads of rail and vehicle and the regularities of their movement. The appearance of a metal scale on the wheel’s surface causes technical and maintenances problems for the rolling stock. Railway standards limit the speed of movement that depends on a certain size of metal scale.
W niniejszym artykule przedstawiono modele matematyczne koła pojazdu szynowego z powstałą w wyniku zużycia metalową łuską. Analizując oddziaływania pomiędzy kołem pojazdu z łuską a szyną w układzie "pojazd–tor", badano zmiany kinematycznych i dynamicznych parametrów punktów kontaktu koła z szyną zachodzące w czasie, w zależności od wysokości metalowej łuski (2mm), przy długości łuski 100 mm i zakresie prędkości ruchu pojazdu V = 40–100 km/h. Wyniki uzyskane w badaniu układu "pojazd–tor" dla kół na powierzchni których powstała metalowa łuska, umożliwiają lepsze zrozumienie oraz ocenę wpływu łuski na dynamiczne obciążenia szyny i pojazdu oraz prawidłowości ruchu pojazdu. Pojawienie się metalowej łuski na powierzchni koła powoduje problemy techniczne i obsługowe w utrzymaniu ruchu taboru kolejowego. Normy kolejowe ograniczają prędkość ruchu pojazdów szynowych, uzależniając ją od rozmiaru łuski.
Źródło:
Eksploatacja i Niezawodność; 2018, 20, 4; 638-649
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polska chce parasola : Scharping musiał w Warszawie uspokajać polityków zaniepokojonych stanowiskiem Niemiec
Autorzy:
Ludwig, Michael.
Powiązania:
Forum 1998, nr 51/52, s. 4
Współwytwórcy:
(jm). Tłumaczenie
Data publikacji:
1998
Tematy:
NATO strategia projekty 1998 r.
Strategia obronna projekty NATO 1998 r.
Bezpieczeństwo narodowe Polska 1998 r.
Strategia uderzenia atomowego projekty NATO 1998 r.
Bezpieczeństwo międzynarodowe
Opis:
Tł. art. zamieszcz. w "Frankfurter Allgemeine Zeitung". -- 1998, 7 XII.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
The influence of the "train-track" system parameters on the maximum longitudinal forces level
Autorzy:
Pshinko, Oleksandr
Ursulyak, Liudmyla
Kostrytsia, Serhii
Fedorov, Yevhen
Shvets, Anzhela
Powiązania:
https://bibliotekanauki.pl/articles/375397.pdf
Data publikacji:
2019
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
mathematical modelling
parameters of the longitudinal profile
regulating braking
longitudinal forces of impact and quasistatic character
braking distances
modelowanie matematyczne
parametry profilu podłużnego
regulacja hamowania
wzdłużne siły uderzenia
droga hamowania
Opis:
The main objective of the simulation is to study the effect caused by the parameters of the longitudinal profile on the maxima of longitudinal forces in freight trains of increased length during adjustment braking and running-out. To decrease the number of numerical experiments, some empirical formulae for estimating the maximum longitudinal forces during the motion of freight trains along the track with various configurations of its longitudinal profile's gradient changes have been obtained for the first time. Comparison of those forces with the permitted values, from the point of view of the railway stock strength and eventual vehicle derailment, has been performed. As a result of numerical integration of the system of non-linear differential equations of train motion for the considered driving modes, the values of the greatest longitudinal shock and quasi-static forces, as well as the dependence of the latter on the train length, initial braking velocity, on the algebraic difference of gradients and the length of the horizontal area that separates two gradients with opposite signs are estimated. The proposed mathematical model and methodology can be applied during standardization of the longitudinal profile's parameters from the point of view of the freight traffic safety for the trains of various length.
Źródło:
Transport Problems; 2019, 14, 4; 161-172
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wpływu kąta uderzenia 7,62 mm pocisku pistoletowego z rdzeniem ołowianym i płaszczem stalowym na penetrację wkładów balistycznych aramidowych i polietylenowych
Effect of Impact Angle on Penetration of Aramid and Polyethylene Internal Ballistic Panels with the Use of 7.62 mm Lead Core, Steel Jacket Projectiles
Autorzy:
Wróblewski, A.
Pracht, M.
Powiązania:
https://bibliotekanauki.pl/articles/403823.pdf
Data publikacji:
2015
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
balistyka końcowa
granica ochrony balistycznej
kuloodporność próbek
kąt uderzenia pocisku
wkłady podstawowe aramidowe
wkłady podstawowe polietylenowe
kamizelki kuloodporne
terminal ballistics
ballistic limit velocity
bulletproofness
impact angle
aramid panels
polyethylene panels
body armour
Opis:
W artykule zaprezentowano wyniki badań próbek wkładów podstawowych do kamizelek kuloodpornych. Prace ukierunkowane były na określenie wpływu kąta uderzenia pocisku na wartość granicy ochrony balistycznej. Stosowano 7,62 × 25 mm naboje z pociskiem z rdzeniem ołowianym i płaszczem metalowym według klasy K2 normy PN-V-87000:2011. Badaniom poddano dwa podstawowe materiały: aramid i polietylen w kilku wariantach o różnej ilości warstw. Szczególną uwagę zwrócono na wartości najniższych prędkości penetracji oraz odkształcenia pocisków, które je wywołały.
In the paper, tests results of samples of basic body armour panels are presented. The works were intended to determine the influence of projectile impact angle on the value of the ballistic limit velocity. 7.62 × 25 mm rounds with lead core and metal jacket bullets were used according to K2 class of the standard PN-V-87000: 2011. The tests involved two basic materials: aramid and polyethylene in several variants and different numbers of layers. Particular attention was paid to the lowest penetration velocity and bullets deformation.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2015, 6, 1 (19); 91-102
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Technological Concept of Textile Highly-Flexible Road Barriers
Koncepcja nowej technologii wysokoelastycznych tekstylnych barier drogowych
Autorzy:
Mikołajczyk, Z.
Perzyna, M.
Szałek, B.
Pieklak, K.
Powiązania:
https://bibliotekanauki.pl/articles/232926.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
road safety
road barriers
non-deformable barriers
flexible barriers
textile barriers
impact energy
safety belt pressure
bezpieczeństwo drogowe
bariera drogowa
nieodkształcalne bariery
elastyczne bariery
bariery tekstylne
energia uderzenia
siła nacisku na pas bezpieczeństwa
Opis:
The main element of road safety is the use of protective barriers. Among all barriers can be distinguished non-deformable solid concrete, steel and deformable rope barriers. A new solution proposed in this publication are highly flexible and strength knitted barriers. Through analysis of the barriers’ nature, simulations of typical vehicle collision processes with barriers were carried out. For this purpose, calculations of G-forces which a human experiences during a vehicle collision with the barrier were conducted, and values of human pressure forces on the seat belt, created as a result the vehicle collision, were determined. There were also appointed values of impact energy created at the contact moment of the vehicle with the barrier. It was proved that textile knitted barriers cause a 30-fold decrease in the negative g-forces of the driver and passengers and 12-fold reduction in the pressure force of seat belts on the human body, providing the ability to absorb the impact energy of both cars and trucks, including buses, moving with a speed of 100 to 160 km/h. The publication presents a summary of preliminary research that justifies the desirability of textile barrier use in road engineering.
Podstawowym elementem bezpieczeństwa ruchu drogowego jest stosowanie barier ochronnych. Wśród barier można wyróżnić stałe nieodkształcalne bariery betonowe i stalowe oraz odkształcalne bariery linowe. Nowym rozwiązaniem proponowanym w publikacji są wysokoelastyczne, wytrzymałe bariery dziane. Analizując charakterystykę barier, dokonano symulacji przebiegu typowych kolizji pojazdów z barierami. W tym celu przeprowadzono obliczenia przeciążeń, jakich doznaje człowiek w trakcie kolizji pojazdu z barierą oraz wyznaczono wartości siły nacisku człowieka na pas bezpieczeństwa, powstałej w wyniku zderzenia pojazdu. Wyznaczono również wielkości energii uderzenia powstałej w chwili zetknięcia pojazdu z barierą. Wykazano, iż tekstylne bariery dziane powodują 30-krotne zmniejszenie ujemnych przyspieszeń ciała kierowcy i pasażerów oraz 12-krotne zmniejszenie siły nacisku pasów bezpieczeństwa na ciało człowieka, zapewniają możliwość absorpcji energii uderzenia samochodów osobowych i ciężarowych, w tym autobusów, jadących z prędkością od 100 do 160 km/h. Publikacja przedstawia podsumowanie wstępnych badań uzasadniających celowość stosowania barier tekstylnych w inżynierii drogowej.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 5 (113); 99-105
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zabytkowe dzwony – zagadnienia mechaniki i napędu
Historical bells – mechanics and drive problems
Autorzy:
Rapp, P.
Powiązania:
https://bibliotekanauki.pl/articles/217861.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Konserwatorów Zabytków
Tematy:
dzwon
wahadło fizyczne
współczynnik kształtu
środek uderzenia
obciążenie dynamiczne
napęd łańcuchowy
napęd elektromagnetyczny
jarzmo proste
jarzmo wykorbione
bell
physical pendulum
shape coefficient
strike centre
dynamic load
chain drive
electromagnetic drive
plain yoke
cranked yoke
Opis:
W prezentowanym artykule na wstępie przedstawiono nawiązanie do historii oraz krótki opis dzwonu jako instrumentu muzycznego. W głównym nurcie artykułu w sposób bardziej szczegółowy omówiono kilka podstawowych zagadnień, takich jak mechanika dzwonu traktowanego jako wahadło fizyczne wykonujące płaskie drgania wokół osi obrotu w miejscu oparcia jarzma na konstrukcji wsporczej, oddziaływanie dzwonu na konstrukcję wsporczą, sposoby wzbudzania i podtrzymywania drgań dzwonu, elektromagnetyczny napęd największego w Polsce dzwonu Bogurodzica w Licheniu oraz zawieszenia dzwonów na jarzmach prostych i wykorbionych. Omawiane zagadnienia mają istotne znaczenie nie tylko dla nowo projektowanych dzwonnic, lecz w znacznie większym stopniu są ważne dla obiektów zabytkowych, w których dynamiczne oddziaływania dzwonów mogą mieć niekorzystny wpływ na ich konstrukcję.
In the introduction to the paper a short historical background and a brief description of a bell as a musical instrument is presented. The main part of the paper is devoted to a few fundamental issues related to bell mechanics: bell analysis as a plane physical pendulum vibrating in about the axis passing through the point were yoke is fixed to the supporting structure, action of the bell on the supporting structure, methods of starting and sustaining the bell vibrations, electromagnetic drive of the largest bell in Poland – Bogurodzica and hanging the bells in plain and cranked yokes. These issues are of significant importance not only for newly designed belfries but even in a greater extent to monumental buildings were dynamic action of bells my have a negative influence on the structure.
Źródło:
Wiadomości Konserwatorskie; 2014, 40; 41-57
0860-2395
2544-8870
Pojawia się w:
Wiadomości Konserwatorskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uderzenia w ustroje niosące – strategie i reguły dotyczące zapewnienia bezpieczeństwa
Impacts on superstructure bridge – strategies and rules for ensuring safety
Autorzy:
Hanaczowski, Marek
Powiązania:
https://bibliotekanauki.pl/articles/24024762.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
belki prefabrykowane typu T
uderzenia w pomost
strategie projektowe
awarie obiektów mostowych
klasy odporności konstrukcji
skrajnia pionowa
EN 1991-1-7
precast “T” beams
deck impacts
design strategies
bridge failures
construction resistance classes
vertical clearance
Opis:
Artykuł przedstawia próbę usystematyzowania szerokiego i wielopłaszczyznowego zagadnienia jakim jest zapewnienie bezpieczeństwa konstrukcji na oddziaływania wynikające z kolizji pojazdów w ustroje niosące obiektów mostowych. W opracowaniu zostało pokazanych kilka spektakularnych kolizji o różnym stopniu destrukcji elementów obiektu mostowego zarówno w Polsce jak i na świecie. Zaproponowano ogólny podział typów uszkodzeń obiektów mostowych z punktu widzenia trwałości i bezpieczeństwa konstrukcji istotne dla zarządcy obiektu oraz zaproponowano klasyfikację obiektów mostowych ze względu na odporność na oddziaływania od uderzenia w ustroje niosące. Dodatkowo zostały pokazane i opisane cztery przypadki kolizji w belki prefabrykowane typu T oraz wprowadzenie do projektowania na oddziaływania od uderzenia w pomost wg Eurokodu.
The article presents an attempt to systematize a broad and multifaceted issue, which is ensuring the safety of the structure on the impacts resulting from the collision of vehicles with the bridge decks. The study shows several spectacular collisions with varying degrees of damage of the elements of the bridge, both in Poland and in the world. A general classification of damage types of bridges from the point of view of durability and safety of the structure relevant for the facility manager is proposed, as well as a classification of bridges according to resistance to impact on superstructures. Additionally, four cases of collisions with T-type prefabricated beams have been shown and described and an introduction to designing of impacts with the bridge decks according to Eurocode.
Źródło:
Drogownictwo; 2022, 2-3; 49--56
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Small Punch Test Method in Studies of the 14MoV63 Steel Before and After Revitalisation
Zastosowanie metody small punch w badaniach stali 14MoV63 przed i po rewitalizacji
Autorzy:
Kłaput, J.
Powiązania:
https://bibliotekanauki.pl/articles/356563.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
steel for operation at elevated temperatures
unconventional small punch test method
transition temperature
temperature of sudden loss of ductility
stal do pracy w podwyższonych temperaturach
niekonwencjonalna metoda small punch test
siła uderzenia
krzywe przejścia
utrata plastyczności
Opis:
The paper presents the results of studies of the chromium-molybdenum-vanadium steel designed for operation at elevated temperatures. The material was examined after long-term operation and after the revitalising heat treatment. Studies were performed by conventional methods and small punch test. Curves of ductile-brittle transition were plotted from the Charpy V-notch impact tests and were next compared with the curves of sudden loss of ductility obtained in the small punch test. Additionally, for the material before and after revitalisation, the values of temperatures Tpk and Tnuc were calculated using the method of inflection point.
W pracy przedstawiono wyniki badań stali chromowo-molibdenowo-wanadowej przeznaczonej do pracy przy podwyższonych temperaturach. Materiał badano w stanie po wieloletniej eksploatacji i po obróbce cieplnej rewitalizującej. Badania prowadzono z zastosowaniem metod konwencjonalnych oraz przy pomocy metody small punch. Sporządzono krzywe przejścia plastyczno-kruchego z próby udarności Charpy V i porównano je z krzywymi nagłej utraty ciągliwości z próby small punch. Dla materiału przed i po rewitalizacji określono wartości temperatur Tpk i Tnuc stosując metodę punktu przegięcia.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 47-50
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on SHPB cyclic impact of rubber-cement composite with different confine modes
Autorzy:
Yang, Rongzhou
Xu, Ying
Chen, Peiyuan
Cheng, Lin
Ding, Jinfu
Fu, Hongxin
Powiązania:
https://bibliotekanauki.pl/articles/27312124.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
dzielony pręt Hopkinsona
polimer wzmocniony włóknem węglowym
kompozyt gumowo-cementowy
oddziaływanie cykliczne
energia pękania
uszkodzenie
odporność na uderzenia
split Hopkinson pressure bar
carbon fibre reinforced polymer
rubber-cement composite
cyclic impact
damage
fracture energy
impact resistance
Opis:
To promote the application of rubber-cement composites as the main bearing structure and key components in practical engineering under frequent dynamic disturbances, in this work, the split Hopkinson pressure bar (SHPB) cyclic impact tests of rubber-cement composite specimens with four different confine modes were carried out in which the impact load increased sequentially. The relationship between average strain rate, ultimate strain and impact times and the relationship between peak stress, damage energy, ultimate strain and incident energy were analyzed. The results showed that the appropriate confine reinforcement treatment can make rubber-cement composite give full play to its deformation ability when it was completely damaged. Carbon fiber-reinforced polymer (CFRP) sheet and steel cylinder can work together with the rubber-cement composite matrix to resist impact load, which effectively improves the structural strength, damage fracture energy, and cyclic impact resistance of the rubber-cement composite. Finally, based on the effect difference of confine modes, the simplified plane force models of rubber-cement composite specimens with four different confine modes were established, which clearly revealed the completely different impact resistance mechanism of the rubber-cement composites with different constraints under cyclic impact loading.
Źródło:
Archives of Civil Engineering; 2023, 69, 2; 517--534
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3-D computer research and comparative analysis of dynamic aspects of drum brakes and caliper disc brakes
Autorzy:
Slavchev, Y.
Dimitrov, L.
Dimitrov, Y.
Powiązania:
https://bibliotekanauki.pl/articles/140037.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
3-D computer multibody simulation (MBS) model
braking time
friction forces
normal forces
radial run-out
impact function based contact
komputerowy model 3D kinematycznej symulacji wieloczłonowej MBS
czas hamowania
siły tarcia
siły normalne
bicie promieniowe
kontakt oparty na funkcji uderzenia
Opis:
This paper presents the construction of adequate 3-D computer models for simulation research and analysis of dynamic aspects of caliper disc brakes, as well as of drum brakes, actuated by a short stroke electromagnet or a hydraulic thruster, when these brake types are used in the hoisting mechanism of cranes. The adequacy of the 3-D models has been confirmed by comparing their simulation results with results from an experiment and from classic computation a models. The classic computational models, related to the study of main dynamic features of friction brakes, are layouts that are based on a number of assumptions, such as that the braking force instantly reaches its steady-state value, the clearance between the friction lining and the disc/drum is neglected, etc. These assumptions lead to alimitation of research options. The proposed 3-D computer models improve the research layouts by eliminating a number of the classic model assumptions. The improvements are related to the determination of the braking time, braking torque, normal force and other dynamic aspects of the brakes by performing simulations that take into account: the braking force as a function of time, the presence of clearance between the friction lining and the disc/drum, etc.
Źródło:
Archive of Mechanical Engineering; 2018, LXV, 2; 253-276
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ratownictwo psychologiczne w fazie „pierwszego uderzenia”
Psychological Rescue in the “First Strike” Phase
Autorzy:
Sideris, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/556878.pdf
Data publikacji:
2018
Wydawca:
Krakowska Akademia im. Andrzeja Frycza Modrzewskiego
Tematy:
symptoms of acute stress reaction
the role of psychologists in the first phase of ‟impact
guidelines of the Council of the European Union
psychological assistance
objawy ostrej reakcji stresowej
rola psychologów w fazie „pierwszego uderzenia
wytyczne Rady Unii Europejskiej
pomoc psychologiczna
Opis:
In the first part of the article, the necessity of providing psychological help to the victims directly at the scene was justified. The author emphasises the place and role of psychologists in the phase of the first strike. The second part presents legal acts imposing the obligation to provide this assistance to participants of tragic events about the size of disasters. Here, attention was brought to the inconsistency of the provisions of the Acts, as well as the role of universal education in psychological knowledge and skills at the stage of preparing for a crisis. In the summary, it was hilighted that there is a strong necessity to introduce groups of psychologists for simulation exercises in order to improve the efficiency of action in crisis situations. the need to conduct a consistent policy in the field of prevention, mental health protection, care and psychological rehabilitation in all phases of crisis. Furthermore, it was emphasized, that that there is a strong need to educate psychologists with aspects of crisis management, defense and the ability to provide first psychological help at the scene.
W pierwszej części artykułu uzasadniono konieczność objęcia pomocą psychologiczną poszkodowanych bezpośrednio na miejscu zdarzenia oraz wskazano miejsce i rolę psychologów w fazie „pierwszego uderzenia”. W drugiej części przedstawiono akty prawne nakładające obowiązek niesienia takiej pomocy uczestnikom zdarzeń o rozmiarze katastrof, zwrócono uwagę na niespójność zapisów ustaw, a także wskazano na rolę powszechnej edukacji w zakresie wiedzy i umiejętności psychologicznych na etapie przygotowania do sytuacji kryzysowej. W podsumowaniu zwrócono uwagę na konieczność wprowadzenia grup psychologów do ćwiczeń symulacyjnych w celu poprawy efektywności działania w sytuacjach kryzysowych, konieczność prowadzenia spójnej polityki w zakresie profilaktyki, ochrony zdrowia psychicznego, opieki i rehabilitacji psychologicznej we wszystkich fazach zaistnienia kryzysu, a także podkreślono konieczność kształcenia psychologów z aspektów zarządzania kryzysowego, obronności oraz umiejętności udzielania pierwszej pomocy psychologicznej na miejscu zdarzenia.
Źródło:
Bezpieczeństwo. Teoria i Praktyka; 2018, 2; 43-56
1899-6264
2451-0718
Pojawia się w:
Bezpieczeństwo. Teoria i Praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-55 z 55

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies