Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "time domain" wg kryterium: Temat


Tytuł:
Heterostructure photonic crystal multichannel drop filter based on microcavities and ring resonators
Autorzy:
Amirkhani-Shahraki, A
Shahraki, M N
Mosavi, M.R.
Powiązania:
https://bibliotekanauki.pl/articles/174469.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
finite difference time domain method
ring resonators
heterostructure
microcavities
photonic crystal integrated circuits
Opis:
In this paper, a heterostructure photonic crystal multichannel drop filter based on ring resonators and microcavities is presented. This structure has been made in the form of a two-dimensional square lattice with two regions with refractive indexes of 3.464 and 3.86. The refractive indexes are so chosen as to allow the easy and practical fabrication of the device. The presented heterostructure photonic crystal multichannel drop filter consists of a waveguide, two ring resonators and a microcavity. This microcavity is placed at the end of the bus waveguide. The ring resonators have been installed in two regions with different refractive indexes. These ring resonators act as energy couplers, and at their resonance frequencies, they capture the electromagnetic energy which is transmitted in the bus waveguide. Filter characteristics have been obtained by using the finite difference time domain method. Finally, we will demonstrate that in the optimal structure, at ports B and D (vertical), drop efficiencies close to 90% and 67%, respectively, can be obtained within the third communication window, and at port C (horizontal), an efficiency of almost 80% can be achieved within the second communication window.
Źródło:
Optica Applicata; 2014, 44, 1; 5-15
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis and Modeling of Domain Registration Process
Autorzy:
Arabas, P.
Jaskóła, P.
Kamola, M.
Karpowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/309217.pdf
Data publikacji:
2012
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
domain market
domain registration
forecasting
time series modeling
Opis:
The paper presents analysis of the domain name reservation process for the polish .pl domain. Two models of various time scale are constructed and finally combined to build long range high resolution model. The results of prediction are verified using real data.
Źródło:
Journal of Telecommunications and Information Technology; 2012, 2; 63-73
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Predictive regulation of the output voltage of a three-phase two-level voltage inverter with an LC filter
Autorzy:
Behrendt, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/135032.pdf
Data publikacji:
2019
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
uninterruptible power supply (UPS)
model predictive control (MPC)
predictive voltage regulator
load current prediction in the time domain
load current prediction in the frequency domain
total harmonic distortion (THD)
Opis:
The article has presented a predictive output voltage regulator of a three-phase two-level voltage inverter with an LC filter with a prediction of the receiver current in the time domain and the frequency domain. Simulations of the operation of the regulator were conducted for a three-phase receiver. The circuit model and simulations of the operation of the predictive voltage regulator were performed in the PSIM program. The algorithm of the predictive regulator was written in the C programming language in the Microsoft Visual Studio compiler and attached to the model performed in the PSIM program by a block that supports the Dynamic-Link Library.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2019, 57 (129); 79-87
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical time-domain model for tool point dynamics in turning
Autorzy:
Berglind, L.
Ziegert, J.
Powiązania:
https://bibliotekanauki.pl/articles/99687.pdf
Data publikacji:
2014
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
chatter
turning
analytical model
time domain
Opis:
An analytical time domain solution is developed to model the dynamic response of a tool during a simple turning operation. The time domain solution developed in this paper relies on the superposition principal under the linear assumption to construct the time response of single mode, single degree of freedom cutting tool. The results from the analytical solution are compared with those generated using numerical time domain simulations and it is found that the two solutions converge as the time step used in the numerical simulation decreases.
Źródło:
Journal of Machine Engineering; 2014, 14, 4; 75-94
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prolonged job strain reduces time-domain heart rate variability on both working and resting days among cardiovascular-susceptible nurses
Autorzy:
Borchini, Rossana
Bertù, Lorenza
Ferrario, Marco M.
Veronesi, Giovanni
Bonzini, Matteo
Dorso, Marco
Cesana, Giancarlo
Powiązania:
https://bibliotekanauki.pl/articles/2176995.pdf
Data publikacji:
2015-02-24
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
nurses
job strain
heart rate variability
HRV
time-domain parameters
ECG-monitoring
Opis:
Introduction Modifications of hearth rate variability (HRV) constitute a marker of the autonomic nervous system (ANS) deregulation, a promising pathway linking job strain (JS) and cardiovascular diseases (CVD). The study objective is to assess whether exposures to recent and prolonged JS reduce time-domain HRV parameters on working days (WD) among CVD-susceptible nurses and whether the association also persists on resting days (RD). Material and methods 313 healthy nurses were investigated twice with one year interval to assess JS based on the demand-control and the effort-reward models. 36, 9 and 16 CVD-susceptible nurses were classified as low JS in both surveys (stable low strain – SLS), recent high JS (high JS at the second screening only-RHS) and prolonged high JS (high strain in both surveys-PHS), respectively. In 9, 7 and 10 of them, free from comorbidities/treatments interfering with HRV, two 24-h ECG recordings were performed on WD and RD. Differences in the time domain HRV metrics among JS categories were assessed using ANCOVA, adjusted for age and smoking. Results In the entire sample (mean age: 39 years, 83% females) the prevalence of high job strain was 38.7% in the second survey. SDNN (standard deviation of all normal RR intervals) on WD significantly declined among JS categories (p = 0.02), with geometric mean values of 169.1, 145.3 and 128.9 ms in SLS, RHS, PHS, respectively. In the PHS group, SDNN remained lower on RD as compared to the low strain subjects (142.4 vs. 171.1 ms, p = 0.02). Similar findings were found for the SDNN_Index, while SDANN (standard deviation of average RR intervals in all 5 min segments of registration) mean values reduced in the PHS group during WD only. Conclusions Our findings suggest that persistent JS lowers HRV time-domain parameters, supporting the hypothesis that the ANS disorders may play an intermediate role in the relationship between work stress and CVD.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2015, 28, 1; 42-51
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka rdzenia transformatora elektroenergetycznego z wykorzystaniem zmodyfikowanej metody wibroakustycznej
Diagnosis of power transformer core using the modified vibroacoustic method
Autorzy:
Borucki, S.
Powiązania:
https://bibliotekanauki.pl/articles/153865.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
transformator elektroenergetyczny
rdzeń
diagnostyka
analiza czasowo-częstotliwościowa
drgania
metoda wibroakustyczna
power transformer
core
diagnosis
time and frequency domain analysis
vibration
vibroacoustic method
Opis:
Genezę podjętych w artykule prac stanowi problem skutecznej oceny stanu technicznego konstrukcji mechanicznej rdzeni transformatorów elektroenergetycznych. W publikacji zaprezentowano wyniki wskazujące na możliwość opracowania nowej i bezinwazyjnej metody diagnostycznej rdzeni z wykorzystaniem zaproponowanej przez autora tzw. zmodyfikowanej metody wibroakustycznej (MVM). Zamieszczone w artykule oryginalne rezultaty badań uzyskano podczas prób laboratoryjnych z wykorzystaniem transformatora olejowego o mocy 200 kVA.
The problem of effective assessment of the technical condition of power transformer core mechanical structure originated the research work discussed in this paper. The investigation results show the possibility of developing a new and non-invasive diagnostic method for the transformer magnetic circuit. The method developed is based on time-frequency analysis of measured mechanical vibrations of the device monitored. The recording of vibrations is performed during the monitored transformer no-load operation. The paper characterises the power object under study (Fig. 1), the measuring system applied and discusses the new methodology for assessing the core technical condition using the modified vibroacoustic method (MVM). The original measurement results presented in the paper were obtained during switching on a 200 kVA transformer under laboratory conditions. The analysis of the signals measured was carried out for three operating conditions of the transformer under study: with the core pressed by a manufacturer; with the core with loose screws fixing the upper yoke (Fig. 2a) and with the core with loose screws fixing the upper and lower yokes (Fig. 2b). The research results (Figs. 3-5) obtained from this experiment show a potential possibility of developing a non-destructive and effective method for assessing the technical condition of the core mechanical structure of transformer units operating in the electric power system, especially the ones of a strategic character.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 4, 4; 331-334
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Problem of Aliasing and Folding Effects in Spectrum of Sampled Signals in View of Information Theory
Autorzy:
Borys, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/2055264.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
signal sampling
modeling of sampled signal in the time domain
signal information content
spectrum aliasing and folding
Banach–Tarski-like paradox in signal sampling
Opis:
In this paper, the problem of aliasing and folding effects in spectrum of sampled signals in view of Information Theory is discussed. To this end, the information content of deterministic continuous time signals, which are continuous functions, is formulated first. Then, this notion is extended to the sampled versions of these signals. In connection with it, new signal objects that are partly functions but partly not are introduced. It is shown that they allow to interpret correctly what the Whittaker–Shannon reconstruction formula in fact does. With help of this tool, the spectrum of the sampled signal is correctly calculated. The result achieved demonstrates that no aliasing and folding effects occur in the latter. Finally, it is shown that a Banach–Tarski-like paradox can be observed on the occasion of signal sampling.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 2; 315--322
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unmanned ship simulation with real-time dynamic risk index
Autorzy:
Brake, M. C. ter
Iperen, E. (W. H.) van
Looije, D.
Koldenhof, Y.
Powiązania:
https://bibliotekanauki.pl/articles/135142.pdf
Data publikacji:
2015
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
autonomous ship
ship domain
simulation
dynamic risk
real-time
risk
Opis:
Currently there is growing interest in unmanned shipping. In the case of unmanned ‘autonomous’ shipping, navigation is automated by on-board decision-making systems. Important motives for unmanned ships include the shortage of skilled mariners, the facilitation of slow steaming strategies, efficiency improvements in confined shipping areas, and increased safety. The aim of the present research is to simulate an unmanned ship through an Automatic Identification System (AIS) based traffic situation. In order to do this, the Maritime Research Institute Netherlands (MARIN) will use the existing simulation technology Dolphin, implement a new tool to read AIS data, simulate a large amount of ships, and develop an auto-captain. The real-time dynamic risk index developed by MARIN will be integrated in Dolphin, to monitor nautical safety of all ships with focus on the unmanned ship. The simulated unmanned ship will navigate according to the International Regulations for Preventing Collisions at Sea (COLREGS). In more complex situations, the auto-captain may use a dedicated decision support tool to find a more efficient solution to pass safely. This approach will be analysed using the real-time dynamic risk index, which will be updated based on latest insights. This paper will discuss the latest development and plans in the unmanned ship simulation project.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2015, 43 (115); 48-54
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the electromagnetic response of complex dispersive material with the single-step wideband finite element method
Autorzy:
Butryło, B.
Powiązania:
https://bibliotekanauki.pl/articles/141234.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
propagation of electromagnetic pulse
dielectric dispersion
frequency selective materials
broadband time-domain simulation
finite element time-domain method
Opis:
The paper describes the formulation and implementation of the broadband finite element time domain algorithm. The presented formalism is valid to analysis of electromagnetic phenomena in linear, frequency selective materials. The complex profile of permittivity of materials is approximated using a set of the Lorentz resonance models. The solution of the integro-differential second order equation is obtained using a singlestep integration scheme and a recursive convolution algorithm. The discussed formulation enables to adopt the structure of the narrowband part as well as the phase of calculation of the convolution equations for the subsequent components. The properties of the algorithm are validated using a finite difference broadband algorithm.
Źródło:
Archives of Electrical Engineering; 2013, 62, 1; 111-122
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An introduction to envelope constrained filter design
Autorzy:
Cantoni, A.
Vo, B.N.
Teo, K.L.
Powiązania:
https://bibliotekanauki.pl/articles/309513.pdf
Data publikacji:
2001
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
filter
optimisation
constraints
envelopes
time domain
noise
robustness
Opis:
Envelope constrained filter design is concerned with the time domain synthesis of a filter whose response to a specified input signal stays within prescribed upper and lowe bounds and in addition has minimal noise enhancement. In many practical applications, a "soft" approach, such as least mean square, is not the most suitable and it becomes necessary to use "hard" constraints such as the ones considered in the paper. We present an overview of key ideas related to robust continuous time envelope constrained filter design.
Źródło:
Journal of Telecommunications and Information Technology; 2001, 3; 3-14
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nieniszczące badania płyt włóknisto-cementowych z wykorzystaniem terahercowej spektroskopii w dziedzinie czasu
Non-destructive testing of fiber-cement boards using time domain terahertz spectroscopy
Autorzy:
Chady, T.
Schabowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/107718.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
badania nieniszczące
płyty włóknisto-cementowe
spektroskopia terahercowa
non-destructive testing
fiber-cement board
terahertz time domain spectroscopy
Opis:
W artykule zaproponowano użycie metody badań nieniszczących wykorzystującej fale elektromagnetyczne o częstotliwościach z zakresu teraherców do inspekcji płyt włóknisto-cementowych. Opisano najczęściej pojawiające się w płytach wady materiałowe. Przeprowadzono pomiary płyt wadliwych i pełnowartościowych z zastosowaniem urządzenia wykorzystującego metodę terahercową. Wstępne badania potwierdziły przydatność zaproponowanej metody do badań płyt włóknisto-cementowych.
The article proposes the use of NDT method utilizing electromagnetic waves with frequencies in the terahertz range for the inspection of fiber-cement boards. First, the most frequently appearing material defects in the plates, are presented. The measurements of defective and flawless plates were carried out using the terahertz method and the selected results are presented. The preliminary tests have confirmed the usefulness of the proposed method for testing fiber cement boards.
Źródło:
Badania Nieniszczące i Diagnostyka; 2016, 1-2; 62-66
2451-4462
2543-7755
Pojawia się w:
Badania Nieniszczące i Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obliczenia flatteru prostokątnego płata ze sterem za pomocą MSC NASTRAN, ZONA ZAERO i ANSYS/Fluent - porównanie z wynikami badań w tunelu aerodynamicznym
MSC NASTRAN, ZONA ZAERO and ANSYS/Fluent flutter computation of rectangular wing with control surface - comparison with wind tunnel flutter tests results
Autorzy:
Chajec, W.
Dziubiński, A.
Powiązania:
https://bibliotekanauki.pl/articles/213584.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
obliczenia flatteru
obliczenia w dziedzinie częstości
obliczenia w dziedzinie czasu
badanie w tunelu aerodynamicznym
aerodynamic flutter calculation
calculations in frequency domain
calculation in time domain
wind tunel tests
Opis:
Do oceny właściwości aeroelastycznych obiektów latających powszechnie wykorzystywane są analizy obliczeniowe w dziedzinie częstości. W niniejszej pracy do sprawdzenia wiarygodności takich obliczeń wykorzystano wyniki badań prostego obiektu (skrzydła ze sterem) przeprowadzonych przed kilku laty w tunelu Instytutu Lotnictwa. W tym celu zbudowano model obliczeniowy badanego obiektu w systemie MSC Nastran. Spośród wielu wyników, do obecnych porównań wybrano najciekawszą konfigurację, dla której w tunelu występował flatter przy prędkości 17,7 m/s, natomiast w obliczeniach w systemie MSC Nastran flatteru nie wykryto. Dla tych danych za pomocą MSC Nastran wykonano metodą PK obliczenia flatteru z wykorzystaniem modeli aerodynamicznych Doublet Lattice i pasowego. Obliczenia flatteru wykonano także za pomocą dwu wersji programu ZAERO firmy ZONA: z marca 2005 r. i z sierpnia 2011 r. We wszystkich przypadkach, do uzyskania w obliczeniach zmierzonej prędkości krytycznej flatteru była konieczna korekta modelu aerodynamicznego. Zastosowano korektę sił aerodynamicznych za pomocą współczynników WTFACT oraz poprzez zmianę zadanego do obliczeń podziału skrzydło/ster. Ten drugi sposób okazał się bardziej skuteczny. Do uzyskania zgodności wyników obliczeń z eksperymentem najmniejszej korekty wymagało zastosowanie nowego programu ZAERO, nieco większej – MSC Nastranu a największej – starszej wersji programu ZAERO. Dla porównania podano także wyniki analiz flatteru tego samego obiektu i tej samej jego reprezentacji modalnej, wykonane w dziedzinie czasu za pomocą systemu ANSYS/Fluent.
A computational analysis in time domain are commonly used for the aeroelastic properties evaluation. In this paper, the credibility of this analysis is proven, based on wind tunnel flutter tests of a simple object – a wing with control surface - provided a few years ago. For this purpose the MSC Nastran computational model was prepared. In order to make the comparison and to obtain a more detailed analysis in time domain, the most interesting test object configuration was selected. For this configuration, on one hand, in the wind tunnel flutter occurs at 17,7 m/s, but on the other hand, by the MSC Nastran typical aerodynamic flutter computation no flutter was detected. For this model the flutter computation using MSC Nastran with PK method and Doublet Lattice a well as strip aerodynamic models, and two versions: March 2005 and August 2011 of the ZAERO software of ZONA Technologies, Inc. were provided. In each case, an aerodynamic model correction for the consistency with test results was necessary. The correction by WTFACT factors or by, for computation done, wing/control surface dividing line change was used. The second idea turned out to be more effective. In order to get good consistency, the new ZAERO software needs the smallest correction of dividing line localization, MSC Nastran needs a middle correction and the old ZAERO software needs the greatest correction. However, in the case of using in MSC Nastran the strip aerodynamic theory, the good consistency appeared. For comparison, there are also presented flutter analyses in time domain concerning the same object, and the same its modal representation, but using ANSYS/Fluent system.
Źródło:
Prace Instytutu Lotnictwa; 2016, 2 (243); 53-72
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integration of elliptical ship domains and velocity obstacles for ship collision candidate detection
Autorzy:
Chen, P. F.
Van Gelder, P.
Mou, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/116538.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
collision avoidance
elliptical ship domain
ship collision candidate detection
time-discrete velocity obstacle algorithm (TD-NLVO)
AIS Data
ship trajectory
collision candidate detection
collision candidate
Opis:
The maritime shipping industry has been making significant contributions to the development of the regional and global economy. However, maritime accidents and their severe consequences have been posing an incrementing risk to the individuals and societies. It is therefore important to conduct risk analysis on such accidents to support maritime safety management. In this paper, a modified ship collision candidate detection method is proposed as a tool for collision risk analysis in ports and waterways. Time-Discrete Velocity Obstacle algorithm (TD-NLVO) is utilized to detect collision candidates based on the encounter process extracted from AIS data. Ship domain model was further integrated into the algorithm as the criteria for determination. A case study is conducted to illustrate the efficacy of the improved model, and a comparison between the existing method and actual ship trajectories are also performed. The results indicate that with the integration of ship domain, the new method can effectively detect the encounters with significant collision avoidance behaviours. The choice of criteria can have a significant influence on the results of collision candidate detection.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 4; 751-758
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the influence of the complex structure of clay hollow bricks on the values of electric field intensity by using the FDTD method
Autorzy:
Choroszucho, A.
Powiązania:
https://bibliotekanauki.pl/articles/140952.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
building materials
electromagnetic waves propagation
finite-difference time-domain method (FDTD)
wireless communication systems
Opis:
The study presents the analysis of the effects occurring at the propagation of electromagnetic waves within an area containing non-ideal, non-homogenous and absorbing dielectric. The analysed models are connected with housing constructions and include single and double-layered walls made of clay hollow bricks. The influence of the size of holes, the contained clay mass percentage and conductivity of brick on the distribution of electric field is presented. Double-layered wall causes more heterogeneity in distribution of electric field and numerous maxima and minima to compare with singlelayered construction. The presented results refer to the electromagnetic field generated by a wireless communication system (Wi-Fi), operating within the standard frequencies (2.4 GHz and 5 GHz). A FDTD method was used to the analysis of electric field distribution. Also in this paper all formulations of difference method (FDTD) is presented. The possibilities of modifying the described method are indicated too. The obtained values of electric field intensity allow to determining the attenuation coefficient for different variants of the walls. Detailed analysis of influence of different types of building construction will make it possible to better understand the wave phenomena and counteract local fading at planning of wireless networks systems.
Źródło:
Archives of Electrical Engineering; 2016, 65, 4; 745-759
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna analiza wpływu kąta padania fali elektromagnetycznej względem ściany wykonanej z cegieł na jakość komunikacji bezprzewodowej wewnątrz inteligentnych budynków
Autorzy:
Choroszucho, A.
Steckiewicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/303722.pdf
Data publikacji:
2016
Wydawca:
Wydawnictwo Druk-Art
Tematy:
inteligentne budynki
materiały budowlane
propagacja fali elektromagnetycznej
metoda różnic skończonych w dziedzinie czasu (FDTD)
komunikacja bezprzewodowa
intelligent buildings
building materials
electromagnetic wave propagation
finite difference time domain method (FDTD)
wireless communications systems
Opis:
W artykule przedstawiono analizę wpływu kąta padania fali elektromagnetycznej generowanej przez komunikację bezprzewodową. Przedstawiono porównanie rozkładów pola elektrycznego w obszarach zawierających dwa rodzaje ścian jednowarstwowych. Zastosowano modele ścian wykonanych z pełnych cegieł oraz powszechnie stosowanych cegieł drążonych (klinkierowych). Przedstawiono wyniki chwilowych wartości pola uzyskanych podczas propagacji fali elektromagnetycznej, jak również rozkłady maksymalnych wartości pola otrzymanych w stanie ustalonym. Przy analizie numerycznej zastosowano metodę różnic skończonych w dziedzinie czasu (FDTD). Analiza dotyczyła częstotliwości stosowanej w sieciach bezprzewodowych (2,4 GHz oraz 5 GHz) montowanych w inteligentnych budynkach. Wyniki dowodzą, iż w tego typu przypadkach konieczne jest przeprowadzenie indywidualnych obliczeń dla poszczególnych wariantów, ponieważ zachodzące zjawiska polowe mają złożony i losowy przebieg. Celem tego typu analizy jest lepsze zrozumienie zachodzących zjawisk polowych wewnątrz złożonych materiałów budowlanych oraz możliwość lepszego modelowania uwzględniającego mobilne systemy komunikacji bezprzewodowej.
The article presents an analysis of the effect of the angle of incidence of the electromagnetic waves generated by wireless communication systems. Presents a comparison of distributions of the electric field in areas containing two types of single-layer walls. Used models of walls made of solid bricks and the commonly used hollow bricks (clinker). Presents results obtained instantaneous values of the electromagnetic wave propagation as well as the schedule of the maximum value of the field obtained in the steady state. To the numerical analysis the finite-difference time-domain method (FDTD) was applied. Analysis related to the frequency used in wireless networks (2.4 GHz and 5 GHz), installed in intelligent buildings. The results show that in such cases it is necessary to carry out individual calculations for different options because occurring phenomena field are complex and random process. The aim of this type of analysis is to better understand the phenomena occurring inside the complex field of building materials and the possibility of better modeling takes into account the mobile wireless communication systems.
Źródło:
Napędy i Sterowanie; 2016, 18, 7/8; 130-133
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies