Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thin coating" wg kryterium: Temat


Tytuł:
Two-parametric analysis of anti-plane shear deformation of a coated elastic half-space
Autorzy:
Sultanova, L.
Powiązania:
https://bibliotekanauki.pl/articles/387113.pdf
Data publikacji:
2018
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
soft thin coating
stiff thin coating
asymptotic
contrast
substrate
Opis:
The anti-plane shear deformation problem of a half-space coated by a soft or a stiff thin layer is considered. The two-term asymptotic analysis is developed motivated by the scaling for the displacement and stress components obtained from the exact solution of a model problem for a shear harmonic load. It is shown that for a rather high contrast in stiffness of the layer and the half-space Winklertype behaviour appears for a relatively soft coating, while for a relatively stiff one, the equations of plate shear are valid. For low contrast, an alternative approximation is suggested based on the reduced continuity conditions and the fact that the applied load may be transmitted to the interface. In case of a stiff layer, a simpler problem for a homogeneous half-space with effective boundary condition is also formulated, modelling the effect of the coating, while for a relatively soft layer a uniformly valid approximate formula is introduced.
Źródło:
Acta Mechanica et Automatica; 2018, 12, 4; 270-275
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Electrolyzed Cassava Starch-Gelatin Coating on Biochemical Properties and Ripening of Banana (Musa acuminata L.) Fruits
Autorzy:
Pham, Thanh Tung
Nguyen, Le Phuong Lien
Baranyai, László
Nguyen, Thuy Linh
Trinh, Khanh Son
Powiązania:
https://bibliotekanauki.pl/articles/2159285.pdf
Data publikacji:
2022-09-05
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
climacteric fruit
starch
electrolysis
respiration
thin coating
Opis:
In this study, cassava starch oxidized by the electrolysis was used as an edible coating to improve the shelf life of banana fruits. The effects of coating in solutions of electrolyzed starch with 1, 2 and 3% (w/v) gelatin and without gelatin addition on respiratory rate and biochemical properties of banana during 8 days of storage at room temperature (75-80% relative humidity) were evaluated. The micrographs of scanning electron microscopy showed very thin coating layers (<25.2 um) with continuous network topology and no cracks. During the storage period, a significant reduction in respiration rate and weight loss of coated bananas compared to uncoated fruits was noted. Furthermore, the change in titratable acidity and contents of soluble solids, total carbohydrates and reducing sugars of coated bananas were slower. Increasing the gelatin content in the coating had a beneficial effect on delaying the ripening of bananas. The oxidized starch coating formulation with 3% (w/v) of gelatin demonstrated the highest efficiency as it delayed the respiratory peak 4 days more than in the uncoated bananas. This study results suggest that electrolyzed starch-gelatin coating could be a potential material to extend the shelf life of fruits.
Źródło:
Polish Journal of Food and Nutrition Sciences; 2022, 72, 3; 263-272
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Materiałowo-energetyczne podstawy kształtowania charakterystyk tribologicznych układu metal-polimer
Material-energy forming principles for metal-polymer friction pairs characterisation
Autorzy:
Przepiórka, J.
Szczerek, M.
Powiązania:
https://bibliotekanauki.pl/articles/190466.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
poliamid
powłoka PVD
modyfikacja
tarcie
zużycie
polyamide
PVD thin coating
modification
friction
wear
Opis:
W artykule przedstawiono metodę zwiększania trwałości polimerowo-metalowych węzłów tarcia. Badania procesów występujących w polimerowo-metalowych węzłach tarcia dowodzą, że współpraca cienkiej polimerowej powłoki z powierzchnią metalową pokrytą powłoką o odmiennych od metalu właściwościach fizykochemicznych pozwala na wyeliminowanie wielu niekorzystnych zjawisk i znaczące złagodzenie negatywnych skutków procesu tarcia.
The paper presents a new method for increasing of service life of the metal-polymer friction pair. The investigation of the processes occurring in polymer/metal friction pairs proves that the interaction of thin polymer coating with metal surface covered by a coating having other physicochemical properties enables the elimination of numerous drawbacks, thus, significantly reducing the negative consequences of the friction process.
Źródło:
Tribologia; 2009, 4; 167-177
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction reduction and improvement of the scuffing resistance of spiral bevel gears by a low-friction coating
Redukcja tarcia oraz poprawa odporności na zacieranie kół zębatych stożkowych o zębach łukowych poprzez osadzenie powłoki niskotarciowej
Autorzy:
Kalbarczyk, M.
Tuszyński, W.
Esparza Lastra, M. A.
Wulczyński, J.
Mydlarz, J.
Kiser, B.
Powiązania:
https://bibliotekanauki.pl/articles/188162.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
spiral bevel gear
friction
scuffing
thin coating
koło zębate stożkowe o zębach łukowych
tarcie
zacieranie
cienka powłoka
Opis:
There are many problems in the operation of spiral bevel gears; for example difficult lubrication conditions and high friction between meshing teeth leads to excessively high oil temperature and the risk of scuffing. Thus, the aim of this work was to check whether by the deposition of a thin, hard, low-friction coating on the teeth flanks of spiral bevel gears it is possible to reduce friction and improve scuffing resistance. The tribological experiments were carried out using two tribotesters: T-02U Four-ball testing machine and T-30 Bevel gear test rig. Two types of thin, low-friction coatings were tested. The first one was a-C:H:W. The other one was MoS2/Ti. The coatings were deposited on one or more tested samples (test balls and bevel gears), so the four material combinations were obtained: steel-steel, coating-steel, steel-coating, and coating-coating. For lubrication a commercial, mineral automotive gear oil of the API GL-5 performance level and 80W-90 viscosity grade was used. The results of the four-ball tests show that the a-C:H:W coating deposited on the teeth flanks is much more effective in friction reduction than MoS2/Ti. The deposition of the a-C:H:W coating on the teeth of the spiral bevel gears proves to be very helpful in reducing friction between the meshing gears. The combination of the a-C:H:W-coated pinion meshing the uncoated wheel is the most efficient. Concerning the improvement of the scuffing resistance, two material combinations are the most effective: a-C:H:W-coated pinion meshing the uncoated wheel and the both gears coated.
Istnieje wiele problemów związanych z eksploatacją kół zębatych stożkowych o zębach łukowych, np. trudne warunki smarowania i wysokie tarcie w zazębieniu, prowadzące do zbyt wysokiej temperatury oleju i pojawienia się ryzyka zacierania. Celem prac było zatem stwierdzenie, czy poprzez osadzenie cienkiej, twardej powłoki niskotarciowej na zębach kół stożkowych możliwa jest redukcja tarcia oraz poprawa odporności na zacieranie. Do badań tribologicznych użyto uniwersalnego aparatu czterokulowego T-02U oraz urządzenia T-30 do badań kół zębatych stożkowych. Przebadano dwie cienkie powłoki niskotarciowe: a-C:H:W oraz MoS2/Ti. Zostały one osadzone na jednym bądź więcej elementach testowych (kulki łożyskowe, koła zębate), uzyskując cztery kombinacje materiałowe: stal-stal, powłoka-stal, stal-powłoka i powłoka-powłoka. Do smarowania użyto handlowego, samochodowego oleju przekładniowego klasy jakościowej API GL-5 i lepkościowej 80W-90, z bazą mineralną. Wyniki badań czterokulowych pokazały, że naniesiona na zęby koła powłoka a-C:H:W jest znacznie bardziej efektywna w redukcji tarcia niż MoS2/Ti. Wyniki badań przekładniowych wykazały, że powłoka a-C:H:W wykazuje skuteczność w redukcji tarcia także kół zębatych stożkowych o zębach lukowych. Najlepsze rezultaty uzyskano dla kombinacji materiałowej pokrytego powłoką zębnika współpracującego z niepokrytym kołem talerzowym. W przypadku odporności na zacieranie najlepsze wyniki uzyskano dla dwóch kombinacji materiałowych: pokryty powłoką zębnik współpracujący z niepokrytym kołem talerzowym oraz oba koła pokryte powłoką.
Źródło:
Tribologia; 2014, 2; 67-77
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efekty zastosowania powłoki niskotarciowej w przekładni przenośnika zgrzebłowego
Effects of the application of low-friction coatings in the gear of a chain conveyor
Autorzy:
Tuszyński, W.
Kalbarczyk, M.
Michalczewski, R.
Stachura, K.
Szczerek, M.
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/189056.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przekładnia stożkowa
cienka powłoka niskotarciowa
zużycie
tarcie
drgania
przenośnik zgrzebłowy
spiral bevel gear
thin coating
wear
friction
vibrations
chain conveyor
Opis:
Istnieje wiele problemów związanych z eksploatacją kół zębatych stożkowych o zębach łukowych. Przykładowo trudne warunki smarowania prowadzą do nadmiernego wzrostu temperatury, a to z kolei wywołuje ryzyko poważnego zużycia. W związku z tym celem tej pracy było sprawdzenie, czy poprzez osadzenie cienkiej powłoki niskotarciowej na zębach koła stożkowego jest możliwe zwiększenie odporności na zużycie, redukcja tarcia i zmniejszenie drgań przekładni. Badania tribologiczne przeprowadzono w dwóch etapach. W fazie pierwszej, laboratoryjnej, użyto urządzenia T-30 do badania kół zębatych stożkowych, opracowanego i wytworzonego w ITeE – PIB w Radomiu. Faza druga to były badania weryfikacyjne z użyciem przenośnika zgrzebłowego stosowanego w górnictwie węgla kamiennego, pracującego w warunkach podobnych do występujących w kopalniach. Zbadano wpływ powłoki niskotarciowej o handlowym symbolu WC/C, osadzonej na zębach koła talerzowego. Dla odniesienia zbadano także przekładnie stożkowe bez powłoki. W badaniach laboratoryjnych do smarowania użyto handlowego, samochodowego oleju przekładniowego klasy jakościowej API GL-5 i lepkościowej 80W-90. W badaniach weryfikacyjnych (półprzemysłowych) do smarowania użyto oleju bazowego mineralnego klasy lepkościowej VG32. Badania tribologiczne wykazały, że poprzez naniesienie powłoki niskotarciowej WC/C na zęby koła talerzowego można uzyskać następujące pozytywne efekty w porównaniu z kołami stożkowymi bez powłoki: zwiększenie odporności na dwie groźne formy zużycia (zacieranie i pitting) oraz spadek temperatury oleju smarującego na skutek mniejszego tarcia – w pierwszej fazie testów. Towarzyszyły temu nieco większe drgania przekładni z powłoką, które jednak zmniejszały się w czasie testu i pod jego koniec były podobne do drgań przekładni bez powłoki. Stwierdzono zatem, że powłoka WC/C pozwala na zwiększenie odporności kół stożkowych o zębach łukowych na zużycie i redukcję temperatury oleju smarującego w przekładniach np. przenośników zgrzebłowych użytkowanych w kopalniach węgla kamiennego.
There are many problems in the operation of spiral bevel gears; for example, difficult lubrication conditions lead to excessively high oil temperature and the risk of severe wear. Thus, the aim of this work was to check whether, by the deposition of a thin, hard, low-friction coating on the teeth flanks of spiral bevel gears, it is possible to improve the resistance to wear, reduce friction, and possibly the gear vibrations. The tribological experiments were carried out in two phases. In the first phase, a bevel gear test rig was used (laboratory testing). In the second phase, a verification test was performed using an industrial gear stand (chain conveyor) working under conditions typical of coal mines. The low-friction WC/C coating was tested. The coating was deposited on the teeth of the wheels. For reference, the uncoated pairs of spiral bevel gears were tested. In the laboratory testing, a commercial, mineral automotive gear oil of the API GL-5 performance level and 80W-90 viscosity grade was used for lubrication. For lubrication of the industrial gears, a mineral base oil of the low, VG32 viscosity grade was chosen. The results obtained show that, by the deposition of the low-friction WC/C coating on the teeth of the wheel, the following beneficial effects can be achieved in comparison with the case of the uncoated gears: a rise in the resistance to the two forms of severe wear (scuffing and pitting), and a drop in the oil temperature (lower friction) at first tests stages. The above effects are accompanied at the first stages of the tests by an undesired, higher level of vibrations in case of the steel–WC/C material combination. However, throughout the test, the vibrations for the two material combinations became similar. Thus, the WC/C coating can be applied to increase the wear resistance and decrease the oil temperature in transmissions containing spiral bevel gears in, e.g., chain conveyors installed in coal mines.
Źródło:
Tribologia; 2015, 6; 121-137
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element modelling of contact interaction between wheel and rail with three-layered thin coating
Modelowanie MES współpracy kontaktowej koła i szyny pokrytej trzema warstwami cienkich powłok
Autorzy:
Kolesnikov, V.
Chebakov, M.
Nasedkin, A.
Sukhov, D.
Powiązania:
https://bibliotekanauki.pl/articles/374883.pdf
Data publikacji:
2010
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
zagadnienie kontaktowe
metoda elementów skończonych
ANSYS
powłoka cienka
współpraca koło-szyna
contact problem
finite element method
thin coating
wheel-rail interaction
Opis:
The stress-strain of thin multilayered coatings covered the surface of the rail is studied near the region of side contact in turning motion. The stress-strain state is studied for various geometric and mechanical coating parameters' values. A theoretical and a finite element models are developed. Stress-strain state analysis has been made based on models developed and recommendations were given for an optimal coating parameters' selection.
Źródło:
Transport Problems; 2010, 5, 2; 119-124
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Własności korozyjne cienkowarstwowych powłok TiN, CrN, TiCN, otrzymanych metodą łukowo-próżniową
The corrosion behaviour of thin-layer coatings TiN, CrN, TiCN deposited by means of the arc-vacuum method
Autorzy:
Rogowska, R.
Powiązania:
https://bibliotekanauki.pl/articles/256407.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
powłoka cienkowarstwowa
metoda łukowo-próżniowa
potencjał korozyjny
prąd korozji
polaryzacja potencjodynamiczna
arc-vacuum method
thin layer coating
corrosion behaviour
potentiodynamic polarization curve
polarization resistance
Opis:
W artykule zaprezentowano odporność korozyjną powłok TiN, CrN, TiCN. Powłoki osadzono metodą łukowo-próżniową na stali SW7M i na węglu szklistym. Badania korozyjne powłok przeprowadzono w 0,8M roztworze NaCl. Wyznaczono potencjał obwodu otwartego, krzywe Tafela i Sterna, szybkość korozji, krzywą polaryzacji potencjodynamicznej i opór polaryzacji. Porównano właściwości korozyjne próbek pokrytych i niepokrytych powłokami. Uzyskane wyniki pokazują, że próbki ze stali SW7M pokryte powłokami posiadają potencjał korozyjny bardziej szlachetny.
The article presents problems of corrosion resistance of TiN, CrN, TiCN coatings. The coatings were deposited on samples of SW7M steel and of the glass-carbon by means of the arc-vacuum method. The corrosion behaviour of TiN, CrN and TiCN coatings was examined in 0.8M NaCl solution. The study was performed using open circuit potential, Tafel and Stern curves, corrosion rate, potentiodynamic polarization curve and polarization resistance. The corrosion behaviour of coated and uncoated samples was compared. The results illustrate that coated specimens TiN, CrN, TiCN possess nobler potentials than the uncoated SW7M steel.
Źródło:
Problemy Eksploatacji; 2006, 3; 181-188
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface free energy of thin-layer coatings deposited by means of the arc-vacuum method
Swobodna energia powierzchniowa cienkowarstwowych powłok nakładanych metodą łukowo-próżniową
Autorzy:
Rogowska, R.
Powiązania:
https://bibliotekanauki.pl/articles/258280.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
powłoka cienkowarstwowa
osadzanie
metoda łukowo-próżniowa
kąt zwilżania
metoda Wilhelmiego
napięcie powierzchniowe
swobodna energia powierzchniowa
thin layer coating
arc-vacuum method
contact angle
Wilhelm's method
surface free energy
Opis:
The aim of this research was to determine the surface free energy (SFE) of executed solids as a quantity characterizing surface properties. The most frequent method used for determining surface free energy of solids is a method based on the measurement of dynamic contact angle and advancing angle. Advancing angle can be measured by means of sessile-drop method or the Wilhelmy method. In this work the contact angle was measured with the use of the Wilhelm's method. The liquids selected for the investigation were a-bromonaphthalene, diiodomethane, formamide, ethylene glycol, glycerin and water. These liquids are characterized by well known physicochemical properties. SFE was determined by means of the following methods: Wu, Owens-Wendt-Rabel-Kaelbl, Van Oss and Fowkes methods. Investigated thin-layer coatings turned out to be solids with medium surface free energy.
Celem pracy było wyznaczenie swobodnej energii powierzchniowej (SFE) badanych ciał stałych jako wielkości charakteryzującej własności powierzchni. Najczęściej spotykaną metodą wyznaczania swobodnej energii powierzchniowej ciał stałych jest metoda oparta na pomiarze dynamicznego kąta zwilżania, kąta wstępującego. Kąt wstępujący może być mierzony metodą osadzanej kropli albo metodą Wilhelmiego. W pracy mierzono kąt zwilżania metodą Wilhelmiego. Jako cieczy modelowych użyto: oc-bromonaftalenu, dijodometanu, formamidu, glikolu etylenowego, gliceryny oraz wody. Ciecze te charakteryzują się dobrze poznanymi własnościami fizykochemicznymi. SFE wyznaczono metodami: Wu, Owensa-Wendta-Rabela-Kaelble'a, Van Ossa oraz metodą Fowkesa. Badane powłoki cienkowarstwowe okazały się materiałami o średniej wartości swobodnej energii powierzchniowej.
Źródło:
Problemy Eksploatacji; 2006, 2; 193-203
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Properties of Sol-Gel Derived Dip-Coated CdO Thin Film
Autorzy:
Kumari, Renu
Kumar, Vipin
Powiązania:
https://bibliotekanauki.pl/articles/1159724.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Band gap
CdO
Sol-gel dip coating
Thin film
Opis:
In this paper CdO thin film has been prepared by sol-gel dip-coating method on glass substrate. The film was characterized by X-Ray diffraction, UV-Visible spectroscopy and photoluminescence spectroscopy for structural and optical properties of CdO thin film. The XRD pattern shows that film is polycrystalline in nature and has a cubical structure with orientation along (111) plane. The diffuse reflectance spectra for the film is studied in wavelength range 400-800 nm. The direct energy band gap of 2.50 eV is found for the film using modified Kubelka-Munk function. Photoluminescence spectra shows one sharp peak at 540 nm due to oxygen vacancy of cadmium oxide.
Źródło:
World Scientific News; 2018, 113; 210-217
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cd Doping on Structural and Some Optical Studies of Nano CuO Films Prepared by Sol–Gel Technique
Autorzy:
Kadhim, Raheem G.
Ban, Raheem Saleh Kzar
Powiązania:
https://bibliotekanauki.pl/articles/1182823.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Cd
CuO
Sol–Gel Spin Coating Technique
Thin Film
Opis:
This research deals with the study of the structural and optical properties of CuO and Cd doped CuO nano films in thickness 100nm were deposited on a glass substrate using sol-gel spin coating technique. XRD results indicated that the films are polycrystalline and have monoclinic structure with a preferred orientation along ((111).) ̅ and the grain size increase with increasing concentration Cd. Data of AFM indicate that the surface of films is smooth. From SEM image observed the particles are smallest an even particle distribution on a smooth surface. The optical transition in the CuO and (Cd– doped CuO) thin films are observed to be allowed direct transition. The value of the optical energy gap decreases with increasing of (Cd) for all samples.
Źródło:
World Scientific News; 2017, 64; 69-83
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Al2O3, ZnO, and TiO2 ALD thin films as antireflection coating in the silicon solar cells
Autorzy:
Szindler, Marek
Szindler, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/27315697.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
optical thin film
antireflection coating
atomic layer deposition
solar cells
Opis:
The article describes the results of a research on the surface morphology and optical properties of Al₂O₃, ZnO, and TiO₂ thin films deposited by atomic layer deposition (ALD) for applications in silicon solar cells. The surface topography and elemental composition were characterised using a scanning electron microscope, and thickness was determined using an optical reflectometer. The samples were structurally examined using a Raman spectrometer. The structural variant was identified: for Al₂O₃ it is sapphire, for TiO₂ it is anatase, and for ZnO it is wurtzite. Possibilities of minimising light reflection using single and double thin film systems below 5% were presented. For the first time, the effectiveness of these thin films on the current-voltage characteristics and electrical parameters of manufactured silicon solar cells was examined and compared. The solar cell with the highest efficiency of converting solar radiation into electricity was obtained for Al₂O₃/TiO₂ and the efficiency of such a photovoltaic device was 18.74%.
Źródło:
Opto-Electronics Review; 2023, 31, 4; art. no. e148223
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polyvinylpyrrolidone/Silicon Dioxide Composite Thin Films - Preparation and Analysis of Properties
Autorzy:
Tański, T.
Matysiak, W.
Zaborowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/355952.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
spin coating
PVP/SiO2
thin films
composite coatings
optical properties
Opis:
The purpose of this study was to produce composite thin films with polyvinylpyrrolidone (PVP) matrix with nanoparticles of silicon dioxide (SiO2 ) as the reinforcing phase (5 and 10%) using spin coating method and to investigate the influence of mass concentration of silica particles and process parameters on the morphology and optical properties of the obtained PVP/SiO2 nanocomposite coatings. The composite layer topography examination, made using atomic force microscope (AFM), showed the increase of roughness due to the increase of silica mass concentration in thin films. UV-Vis spectroscopy analysis showed that with the increase of SiO2 nanoparticles in polymer matrix and use of higher rotation speed, the absorbance level decrease. Besides, composite layers with 10% mass concentration relative to polymer concentration were characterized by wider energy band gap, so it can be concluded that obtained nanocomposite thin films can be used as protective layers against UV radiation, with zero absorption in the range of visible light wavelengths.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 211-215
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of GZO/IZO Dual-Layer as an Electron Transport Layer in Dye-Sensitized Solar Cell
Autorzy:
Manzari Tavakoli, M. H.
Ahmadi, M.
Sabet, M.
Powiązania:
https://bibliotekanauki.pl/articles/353232.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dual-layer
sol-gel
spin coating
thin film
GIZO
solar cell
Opis:
GZO/IZO semiconductor thin films were prepared on the ITO substrate via sol-gel spin coating method for using in the dye-sensitized solar cells (DSSCs). For this purpose, GZO and IZO thin films were optimized by the percentage of doping gallium and indium in zinc oxide and were studied their electrical, optical and structural properties. After that, the layers with the best performance were selected for use in the DSSCs. The concentration of all solutions for spin coating processes was 0.1 M and zinc oxide has been doped with gallium and indium, with different doping percentages (0, 0.5, 1, 2 and 4 volume percentage). So, by studying the properties of the fabricated thin films, it was found the films with 0.5%GZO and 0.5%IZO have the best performance and hence, the optimized dual-layer (0.5% GZO/0.5% IZO (GIZO)) were prepared and studied their electrical and optical properties. The synthesized optimized dual-layer film was successfully used as the working electrode for dye-sensitized solar cells. The sample with 0.5%IZO shows the 9.1 mA/cm2 short-circuit current density, 0.52 V open circuit voltage, 63% fill factor and 2.98% efficiency.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 1609-1614
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrothermal Properties and RF Transmittance of Spray-coated CNT Thin Film for Radome De-icing Application
Autorzy:
Jung, Jun Hyuk
Hong, Jiwon
Kim, Youngryeul
Yong, Seok-Min
Park, Jinwoo
Lee, Seung Jun
Powiązania:
https://bibliotekanauki.pl/articles/351163.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
De-icing
CNT thin film
spray coating
electrothermal property
RF transmittance
Opis:
Ice formed on radome surfaces causes communication disruption due to radio-frequency interference (RFI), which reveals the importance of de-icing systems for radomes. As a radome de-icing application, in this work, carbon nanotube (CNT) thin films were fabricated using a spray-coating method, and influence of process parameters on RF transmittance and electrothermal propertieswas investigated. With the increase of spraying time, sheet resistance of the fabricated film decreases, which results in a decrease of the RF transmittance and improvement of the heating performance. Also, the de-icing capability of the fabricated CNT film was evaluated at –20°C, and efficient removal of ice under cold conditions was demonstrated.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 3; 1011-1014
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cu²⁺ Ion Irradiation on Microstructure of Er₂O₃ Coating Layer Formed by MOCVD Method
Autorzy:
Tanaka, M.
Takezawa, M.
Hishinuma, Y.
Tanaka, T.
Muroga, T.
Ikeno, S.
Lee, S.
Matsuda, K.
Powiązania:
https://bibliotekanauki.pl/articles/1032912.pdf
Data publikacji:
2017-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
nuclear fusion
coating
Er2O3
thin film
TEM
SEM and XRD
Opis:
Erbium oxide (Er₂O₃) coating is one of the promising methods to restrict tritium permeation and the magneto hydrodynamic pressure drop for advanced breeding blanket systems. Er₂O₃ coating layer on large interior surface area of metal pipe is deposited by using metal organic chemical vapor deposition process. In this work, the influence of Cu²⁺ ion irradiation on microstructure of Er₂O₃ coating layer on stainless steel 316 (SUS 316) substrate by metal organic chemical vapor deposition methods was investigated using scanning electron microscopy, transmission electron microscopy observation and X-ray diffraction analysis. Microstructure observation of Er₂O₃ coating was carried out after 0.00-1.50 dpa Cu²⁺ ion irradiation at 298 K and 773 K. Scanning electron microscopy observation of the surface area on Er₂O₃ thin film revealed the crack generation on surface after Cu²⁺ ion irradiation. X-ray diffraction peaks were identified in Er₂O₃ after Cu²⁺ ion irradiation transmission electron microscopy observations, the formation of interlayer between Er₂O₃ coating and SUS substrate was confirmed. According to transmission electron microscopy-energy dispersive spectroscopy, the interlayer includes Fe and Cr.
Źródło:
Acta Physica Polonica A; 2017, 131, 5; 1351-1352
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies