Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thermal modelling" wg kryterium: Temat


Tytuł:
Analiza wpływu zwilżalności ośrodka skalnego na parametry termiczne na podstawie profilowań geofizycznych i danych laboratoryjnych
Analysis of effect of rock wettability on the thermal parameters based on well log data and laboratory measurements
Autorzy:
Lis-Śledziona, Anita
Słota-Valim, Małgorzata
Stadtmüller, Marek
Powiązania:
https://bibliotekanauki.pl/articles/31343919.pdf
Data publikacji:
2023
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
parametry termiczne
zwilżalność
system zwilżalności
profilowania geofizyki wiertniczej
parametry petrofizyczne
współczynnik Amotta
modelowanie
funkcja logistyczna
thermal parameter
wettability
wettability system
well logs
petrophysical parameters
Amott coefficient
modelling
logistic
function
Opis:
Celem prowadzonych badań była analiza i oszacowanie wpływu systemu zwilżalności ośrodka skalnego na jego parametry termiczne. W zależności od temperatury, składu mineralnego, porowatości i nasycenia wodą skałę charakteryzuje określona przewodność cieplna. Jednak nie tylko ilość wody w formacji wpływa na przewodność cieplną. Ważne jest także rozmieszczenie wody w skale, które w znacznym stopniu determinowane jest przez zwilżalność. Woda w skałach wodozwilżalnych pokrywa ziarna i tworzy tzw. film wodny na powierzchni minerałów, wypełnia także małe pory skały, tworząc strugi, ścieżki perkolacji dla migracji fazy przewodzącej ciepło (wody), ale też przewodzącej prąd elektryczny. W skałach hydrofobowych film wodny na powierzchni ziaren mineralnych jest nieciągły lub w ogóle go brak, gdyż większa część powierzchni skały pokryta jest ropą, natomiast woda w większości wypełnia centralną część porów o dużych średnicach. W pracy wykazano, że istnieje zależność pomiędzy systemem zwilżalności skały a przewodnością termiczną oraz przeprowadzono modelowanie ilościowe. Analizowano dane literaturowe z badań na hydrofilowych i hydrofobowych próbkach piasku przy różnym stopniu nasycenia wodą. Obserwacja eksperymentu prowadzącego do zmiany charakteru zwilżalności skały z hydrofilowej na hydrofobową na drodze powleczenia ziaren piasku polimerem zainspirowała autorów niniejszej pracy do zaproponowania dwóch równań przedstawiających zależność przewodności termicznej (λ) od współczynnika nasycenia wodą (Sw) dla skał wodozwilżalnych i skał ropozwilżalnych. W skałach wodozwilżalnych zaobserwowano wykładniczy wzrost przewodności cieplnej wraz ze wzrostem współczynnika nasycenia wodą, natomiast w skałach ropozwilżalnych zależność λ od Sw przedstawiono przy wykorzystaniu funkcji logistycznej. W ramach testowania modeli wykonano serię obliczeń dla czterech hipotetycznych skał klastycznych i czterech skał węglanowych. Przeprowadzono analizę wyników i obliczono przewodność termiczną w rzeczywistym ośrodku skalnym, wykształconym w postaci piaszczysto-ilastych utworów paleozoicznych, dla którego istniały opracowane wcześniej przez autorów wyniki interpretacji parametrów litologiczno-złożowych. Jednym z takich parametrów była obliczona i skalibrowana z wynikami badań laboratoryjnych krzywa zwilżalności. Stanowiła ona podstawę do podziału interpretowanego interwału na strefy wodozwilżane i ropozwilżalne. Ostatecznym wynikiem pracy jest estymacja zakresów zmienności przewodności cieplnej analizowanych skał w funkcji zwilżalności oraz parametrów petrofizycznych (zailenie Vcl, porowatość efektywna PHI, współczynnik nasycenia wodą Sw).
The study aimed to evaluate the impact of the rock medium's wettability system on the thermal properties of the rock. The rock exhibits a specific thermal conductivity depending on the temperature conditions, mineral composition, porosity, and water saturation. However, it is not only the amount of water in the rock that affects its thermal conductivity. The water distribution in the rock, which is mostly determined by its wettability, is also essential. Water in the water-wet rocks covers the grains and creates a so-called water film on the minerals' surfaces. It also fills the tiny pores of the rock, creating streams and percolation paths for the migration of the heat-conducting and electrically conductive phases. In hydrophobic rocks, the water film on the surfaces of the minerals grains is discontinuous or non-existent as most of the rock surface is covered with oil, while water fills the central part of the pores of larger diameters. The results of the study confirmed the existence of a relationship between the rock wettability system and thermal conductivity based on the quantitative modeling that was carried out. The data from the literature were analyzed and tested by taking the hydrophilic and hydrophobic sand samples at various degrees of water saturation. The results of the experiment found in the literature leading to a change in the characteristics of the sand samples from initially hydrophilic into hydrophobic by coating sand grains with thermosensitive polymer led to an idea of proposing two equations presenting the dependence of thermal conductivity on the water saturation coefficient for water-wet and oil-wet rocks. In water-wet rocks, an exponential increase in thermal conductivity was observed with an increase in the water saturation coefficient. In contrast, in oil-wet rocks, the dependence of thermal conductivity λ on Sw was expressed using a logistic function. As part of model testing, a series of calculations were carried out for four hypothetical clastic rocks and four carbonate rocks. The analysis of the obtained results allowed to calculate thermal conductivity for real clastic rock medium represented by Paleozoic sandy claystone formation, with previously developed by the authors lithological interpretation and 1D models of reservoir properties. Among these parameters, a wettability curve was calculated and calibrated with the laboratory data. The wettability was used to distinguish interpreted intervals into the water- and oil-wet zones. Finally, as a result, the variability ranges of thermal conductivity of analyzed rocks were estimated as a function of wettability and petrophysical parameters (Vcl clay volume, PHI effective porosity, Sw water saturation).
Źródło:
Nafta-Gaz; 2023, 79, 4; 227-243
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrocarbon generation modelling in the Permian and Triassic strata of the Polish Basin: implications for hydrocarbon potential assessment
Autorzy:
Botor, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/31342965.pdf
Data publikacji:
2023
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
hydrocarbon potential
kerogen transformation ratio
thermal maturity modelling
Polish Basin
Permian
Triassic
Opis:
Hydrocarbon generation in the Zechstein Main Dolomite and Upper Triassic potential source rocks of the Polish Basin was investigated by 1-D thermal maturity modelling in 90 boreholes across the basin. This identified major zones potentially worthy of further exploration efforts. The maximum burial depth of the Zechstein Main Dolomite and Upper Triassic reached >5 km during the Late Cretaceous leading to maximum thermal maturity of organic matter. Hydrocarbon generation development reveals considerable differences between particular zones of the Zechstein Main Dolomite and Upper Triassic. The kerogen transformation ratio (TR) in the Zechstein Main Dolomite reached values approaching 100% along the basin axis. The TR in the Upper Triassic source rocks is generally lower than in the Zechstein Main Dolomite due to lesser burial. The Upper Triassic source rocks have the highest TR values (>50%) along the basin axis, in the area between boreholes Piła IG 1 and Piotrków Trybunalski IG 1, with the most pronounced zone in the Krośniewice Trough (i.e., between the Krośniewice IG 1 and Budziszewice IG 1 boreholes), where the TR reached >90%. The Zechstein Main Dolomite and Upper Triassic entered the oil window in the Late Triassic to Early–Middle Jurassic, respectively. Hydrocarbon generation continued until the Late Cretaceous, and was completed during tectonic inversion of the basin.
Źródło:
Geological Quarterly; 2023, 67, 2; art. no. 20
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis of thermal stress in Cu2O coating synthesized on Cu substrate
Autorzy:
Shorinov, O.
Powiązania:
https://bibliotekanauki.pl/articles/24200560.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
stress-strain state
residual stress
oxide layers
thermo-mechanical modelling
coefficient of thermal expansion
stan naprężenie-odkształcenie
naprężenie szczątkowe
warstwy tlenkowe
modelowanie termomechaniczne
współczynnik rozszerzalności cieplnej
Opis:
Purpose: The paper aims to find the magnitude and nature of thermal residual stresses that occur during cooling of a copper sample with a thermally synthesized oxide layer of Cu2O. Design/methodology/approach: Thermo-mechanical analysis was performed by the finite element method using Ansys Software. The results of thermal analysis were used to study the resulting stress-strain state of the thin film/coating system after cooling. Findings: Based on the modeling results, the paper determined the most stress-strain areas of the sample with a coating, which are the free edges of the interfaces between the copper substrate and the Cu2O oxide layer. Research limitations/implications: The main limitations of the study are the use of certain simplifications in the condition setup, for instance, uniform cooling of the thin film/coating system, homogeneity and isotropy of substrate and thin film materials, invariance of their properties with temperature changes, etc. Practical implications: The results obtained can be used to control the stress-strain state of the thin film/coating system and prevent deformations and destruction of thin-film structures during their production and operation of products with them. Originality/value: The study of new promising methods for the formation of oxide nanostructures, for instance in a plasma environment, requires a sufficient theoretical basis in addressing the origin and development of stresses.
Źródło:
Archives of Materials Science and Engineering; 2022, 115, 2; 58--65
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model-based, experimental thermoelastic analysis of a large scale turbine housing
Autorzy:
Emonts, Dominik
Sanders, Mark P.
Montavon, Benjamin
Schmitt, Robert H.
Powiązania:
https://bibliotekanauki.pl/articles/2052191.pdf
Data publikacji:
2022
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
thermal error modelling
large scale metrology
virtual climatisation
Opis:
Temporally and spatially unstable thermal conditions lead to inhomogeneous thermoelastic changes in the workpiece geometry. Consequently, non-negligible geometric deviations are evident, especially when measuring large workpieces with narrow tolerances, which often take place in non-climatized production environments and thus make thermal monitoring indispensable. Accurate determination of the thermoelastic behaviour for complex and large geometries is a challenging task with computationally effortful or less accurate existing solutions. Thus, the development of innovative measurement and modelling approaches is subject of current research, whereat physical validation is a prerequisite. Therefore, the authors developed a method, enabling the emulation of typical process heat cycles on a turbine housing in combination with a geometric measurement system. The idea is to provide reproducible and reversible thermal conditions on a representative large workpiece and to investigate the resulting geometric deformation in an economically viable way. Throughout this study, an analogy test rig is presented, integrating different temperature sensors, two geometric measurement systems and thermal deformation models into one demonstrator. The demonstrator's first applications show insightful results, revealing accordance, but also unexpected deviations between the predicted and measured quantities. Moreover, it provides great potential for validation of more complex modelling approaches and innovative thermal condition monitoring systems for large precision workpieces.
Źródło:
Journal of Machine Engineering; 2022, 22, 1; 84-95
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigations of the thermal properties of window systems: a review
Przegląd numerycznych metod określania właściwości cieplnych okien
Autorzy:
Sadko, Karolina
Piotrowski, Jerzy Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/2174676.pdf
Data publikacji:
2022
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
windows
windows thermal resistance
thermal transmittance
heat transfer coefficient
mathematical modelling
okna
opór cieplny okien
przenikalność cieplna
współczynnik przenikania ciepła
modelowanie matematyczne
Opis:
Windows are an essential part of building envelopes since they enhance the appearance of the building, allow daylight and solar heat to come in, and allow people to observe outside. However, conventional windows tend to have poor U-values, which cause significant heat losses during the winter season and undesired heat gain in summer. Modern glazing technologies are therefore required to improve thermal resistance and comfort of the occupants, whilst mitigating the energy consumption of buildings. In the present work, a comprehensive review of the numerical investigations of the thermal properties of window systems and glazed buildings partitions is presented. However, the proposed models to predict the thermal performance most often concern only specific cases of window systems related to geometry and used material solutions, focused on specific physical processes, thus they contain a lot of simplifications, such as omitting the influence of radiation, temperature changes or velocity profiles.
Istotnymi elementami budynków są okna, które wpływają na ich wygląd, umożliwiają dostęp światła dziennego i ciepła pochodzącego z promieniowania słonecznego, a także pozwalają na obserwowanie otoczenia. Jednakże w porównaniu do pozostałych przegród budowlanych konwencjonalne okna charakteryzują się zwykle gorszymi wartościami współczynnika przenikania ciepła U, generując znaczne straty ciepła w sezonie zimowym i niepożądane zyski ciepła w lecie. W związku z tym konieczne jest poszukiwanie nowoczesnych rozwiązań w technologii okiennej, które poprawią opór cieplny i komfort mieszkańców, jednocześnie zmniejszając zużycie energii przez budynki. W niniejszej pracy przedstawiono przegląd numerycznych metod określania właściwości cieplnych okien i przeszklonych przegród budowlanych. Analiza literatury pokazuje, że proponowane modele dotyczą jednak najczęściej tylko konkretnych przypadków systemów okiennych, związanych z określoną geometrią i zastosowanymi rozwiązaniami materiałowymi, w których uwzględnia się jedynie wybrane procesy fizyczne. Skutkiem tego jest przyjmowanie podczas modelowania wymiany ciepła szeregu uproszczeń, takich jak pomijanie wpływu promieniowania czy nieuwzględnianie zmian temperatury i prędkości.
Źródło:
Structure and Environment; 2022, 14, 4; 126--141
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis and PCM selection for adsorption chiller aided by energy storage supplied from the district heating system
Autorzy:
Karwacki, Jarosław
Kwidziński, Roman
Leputa, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2204066.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal sorption cooling
phase change material
thermal energy storage
district heating
adsorption
energy management
mathematical modelling
load shifting
efficiency
Opis:
The paper presents a theoretical analysis of thermal energy storage filled with phase change material (PCM) that is aimed at optimization of an adsorption chiller performance in an air-conditioning system. The equations describing a lumped parameter model were used to analyze internal heat transfer in the cooling installation. Those equations result from the energy balances of the chiller, PCM thermal storage unit and heat load. The influence of the control of the heat transfer fluid flow rate and heat capacity of the system components on the whole system operation was investigated. The model was used to validate the selection of Rubitherm RT62HC as a PCM for thermal storage. It also allowed us to assess the temperature levels that are likely to appear during the operation of the system before it will be constructed.
Źródło:
Archives of Thermodynamics; 2022, 43, 4; 135--169
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation and calibration of thermal and salinity layering in surface water resources using Ce-Qual-W2 model
Autorzy:
Chen, Tzu-Chia
Yu, Shu-Yan
Wang, Chang-Ming
Xie, Sen
Barazandeh, Hanif
Powiązania:
https://bibliotekanauki.pl/articles/2048504.pdf
Data publikacji:
2021
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
Ce-Qual-W2 model
salinity
surface water
thermal layering
water quality modelling
water resources
Opis:
In the discussion of water quality control, the first and most effective parameter that affects other variables and water quality parameters is the temperature situation and water temperature parameters that control many ecological and chemical processes in reservoirs. Additionally, one of the most important quality parameters studied in the quality of water resources of dams and reservoirs is the study of water quality in terms of salinity. The salinity of the reservoirs is primarily due to the rivers leading into them. The control of error in the reservoirs is always considered because the outlet water of the reservoirs, depending on the type of consumption, should always be standard in terms of salinity. Therefore, in this study, using the available statistics, the Ce-Qual-W2 two-dimensional model was used to simulate the heat and salinity layering of the Latyan Dam reservoir. The results showed that with warming and shifting from spring to late summer, the slope of temperature changes at depth increases and thermal layering intensifies, and a severe temperature difference occurs at depth. The results of sensitivity analysis also showed that by decreasing the wind shear coefficient (WSC), the reservoir water temperature increases, so that by increasing or decreasing the value of this coefficient by 0.4, the average water temperature by 0.56°C changes inversely, and the results also show that by increasing or decreasing the value of the shade coefficient by 0.85, the average water temperature changes by about 7.62°C, directly.
Źródło:
Journal of Water and Land Development; 2021, 51; 117-123
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling the Impact of Moisture on the Thermal Conductivity of Cotton Jersey
Modelowanie wpływu wilgoci na przewodnictwo cieplne dzianiny bawełnianej
Autorzy:
Klemenčič, Eva
Zavec, Daniela
Slavinec, Mitja
Powiązania:
https://bibliotekanauki.pl/articles/1419813.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
modelling
thermal conductivity
moisture
knit fabric
cotton
single jersey
modelowanie
przewodnictwo cieplne
wilgoć
dzianina
bawełna
Opis:
In the design of innovative, protective clothing, thermal comfort is of great importance. One of the key factors affecting thermal comfort is the thermal conductivity of clothing. This study aims to show through theoretical estimations that the effective thermal conductivity of moist clothing could expedite the development process. In this study, we present two theoretical models: a linear model and upgraded model. The upgraded model considers the thermal conductivity of air within the clothing and its volume porosity. For verification of the models presented, the impact of moisture on the thermal conductivity of cotton knit fabric was examined experimentally using the contact hot plate method. Correlation analysis shows that the upgraded model has an important advantage as it can predict the stabilisation of effective thermal conductivity.
W projektowaniu nowatorskiej odzieży ochronnej duże znaczenie ma komfort termiczny. Jednym z kluczowych czynników wpływających na komfort cieplny jest przewodnictwo cieplne odzieży. W pracy omówiono dwa modele teoretyczne: liniowy i ulepszony. Ulepszony model uwzględnia przewodność cieplną powietrza w odzieży i jej porowatość. W celu weryfikacji przedstawionych modeli zbadano doświadczalnie wpływ wilgoci na przewodnictwo cieplne dzianiny bawełnianej metodą kontaktową na gorąco. Analiza korelacji pokazała, że ulepszony model ma ważną zaletę, otóż może przewidywać stabilizację efektywnej przewodności cieplnej.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 2 (146); 61-65
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A review on enabling technologies for resilient and traceable on-machine measurements
Autorzy:
Dahlem, Philipp
Emonts, Dominik
Sanders, Mark P.
Schmitt, Robert H.
Powiązania:
https://bibliotekanauki.pl/articles/100047.pdf
Data publikacji:
2020
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
on-machine measurement
thermal modelling
production metrology
Opis:
On-Machine Measurements are a key factor for shorter closed quality control loops in industrial manufacturing. Especially for the production of large components, they promote the first-time-right approach, which is highly desirable, due to small quantities and steep value chains. In contrast to measurement rooms for CMMs, the production environment conditions are unregulated and impact multiple factors along the on-machine measurement metrological chain. As presented as a keynote speech at the XXXI CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems “MANUFACTURING ACTIVE IMPROVEMEN” by Professor Dr. Robert H. Schmitt, this article reviews current research and ideas regarding on-machine measurements. The authors collect necessary process data with the help of new technologies in the course of digitalization and thus propose a holistic model for systematic error compensation and measurement uncertainty prediction. For assessing the machine’s volumetric accuracy under thermal loads, the authors develop a novel modelling approach, which determines transient geometric errors by abstracting structural parts as spline curve with typical deformation modes. To address the workpiece’s influence on the measurement process, a data-driven framework, fusing real-time sensor-data with the virtual component, is used to model and predict transient thermo-mechanical workpiece states. For dissemination, the authors continue working on ISO standardization and, as subjects of future research, explore new paths in terms of data-driven modelling approaches, using physical abstractions coupled with machine learning and live process data.
Źródło:
Journal of Machine Engineering; 2020, 20, 2; 5-17
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Evaluation of Combustion Kinetics for the Synthesis Reaction of the Reinforcing Phase During Casting
Autorzy:
Wiktor, Tomasz
Sobula, Sebastian
Burbelko, Andriy
Ptasznik, Michał
Powiązania:
https://bibliotekanauki.pl/articles/106979.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
MMC
SHS reaction kinetics
Fourier thermal analysis
computer modelling
Opis:
The computer modeling of the solidification process in castings with local composite reinforcement (LCR) obtained as a result of in situ reactions of self-propagating high temperature synthesis (SHS) is difficult due to limited data on the thermo-physical parameters of exothermic effects and the kinetics of the synthesis reaction. In the present study, Hadfield cast steel casting was manufactured with LCR containing titanium carbide particles obtained in situ by the SHS method. Reaction kinetics of titanium carbide synthesis in the composite casting were determined on the basis of temperature measurements in the area of LCR during the process. For the estimation of the reaction, the Fourier Thermal Analysis method was used. The paper presents the results of temperature measurement and the results of the calculation of SHS reaction kinetics. It was found that the reaction time under the conditions of the analyzed casting is below 3 s.
Źródło:
Journal of Casting & Materials Engineering; 2020, 4, 2; 23-28
2543-9901
Pojawia się w:
Journal of Casting & Materials Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
BIM w fizyce budowli. Możliwości i wykorzystanie w praktyce
BIM in building physics. Possibilities and practical use
Autorzy:
Kroner, Wojciech
Noszczyk, Paweł
Noszczyk, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/128733.pdf
Data publikacji:
2020
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
BIM
modelowanie informacji o budynku
fizyka budowli
obliczenia cieplne
obliczenia energetyczne
building information modelling
building physics
thermal calculations
energy calculations
Opis:
Celem niniejszej pracy jest opisanie możliwości, które daje współpraca z fizykiem budowli w całym cyklu życia obiektu budowlanego. W pierwszej części artykułu opisano, jakie informacje (podstawowe i dodatkowe) są potrzebne fizykowi budowli w jego obliczeniach przy modelu BIM (Building Information Modeling). Podano sposób modelowania informacji przez innych uczestników procesu budowlanego z podziałem na informacje środowiskowe, obiektowe i materiałowe. W drugiej części tekstu zwrócono uwagę na informacje, które fizyk budowli może przypisać do poszczególnych obiektów w modelu BIM. W pracy zwrócono uwagę na modelowanie informacji w zakresie obliczeń certyfikacji energetycznej, energooszczędności, komfortu klimatu pomieszczeń, odpowiedniego oświetlenia, komfortu akustycznego pomieszczeń, izolacyjności akustycznej przegród oraz przepływu ciepła i wilgoci w elementach budowlanych oraz detalach. Jednym z najważniejszych zagadnień w BIM jest wzajemne zrozumienie tego, czego potrzebują i jakie informacje mogą wnieść do modelu obiektu poszczególni uczestnicy biorący udział w procesie BIM.
The aim of article is describes the possibilities offered by cooperation with a building physicist throughout the entire life stage of the building. The first part of the article describes what information (basic and additional) is recommended by the building physicist in his calculations using the BIM (Building Information Modeling) model. The way in which this information should be modeled by other participants of the construction process with the division into environmental, object and material information is given. The second part of the text draws attention to information that a building physicist can assign to individual objects in the BIM model. The work focuses on modeling information in the field of energy certification, energy efficiency, indoor climate comfort, adequate lighting, room acoustic comfort, sound insulation of partitions as well as heat and moisture flow in building elements and details. One of the most important issues in BIM is mutual understanding of what they need and what information can be added to the object model by individual participants involved in the BIM process.
Źródło:
Builder; 2020, 24, 7; 29-31
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geophysical properties of the crust and upper mantle of the ocean-continent transition in Svalbard area
Autorzy:
Grad, Marek
Majorowicz, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2041833.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Arctic
Spitsbergen
seismic modelling
gravity modelling
thermal modelling
lithosphere−asthenosphere boundary
Źródło:
Polish Polar Research; 2020, 41, 1; 1-22
0138-0338
2081-8262
Pojawia się w:
Polish Polar Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical Model of the Drying Process of Wet Materials
Model matematyczny procesu suszenia materiałów wilgotnych
Autorzy:
Pavlenko, Anatoliy
Piotrowski, Jerzy Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/1811536.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
thermal insulation material
mathematical modelling
heat treatment
thermal conductivity
thermal process
materiał termoizolacyjny
modelowanie matematyczne
obróbka cieplna
przewodnictwo cieplne
proces termiczny
Opis:
The problem of heat treatment of wet materials contains the question of the heat and mass inside the body transfer (an internal problem) and in the boundary layer at the interface between phases (an external problem). The amount of removable moisture depends on the degree of each of these processes development. When heated, the moisture content on the surface decreases, creating a concentration difference across the body. Therefore, a flow of moisture occurs in the body from deep layers to the surface, towards which the flow of heat is directed. Thus, when wet materials are heated, complex processes of moisture and heat exchange occur, mutually affecting the enthalpy and moisture content of both the heated material and the environment. The features of mathematical model construction of heating and drying of wet materials process are considered in the article. The drying process is defined as a thermal process with effective heat transfer coefficients with consideration of mass transfer. It makes it possible to obtain analytical dependencies that are convenient for engineering calculations, with which you can determine the temperature field and evaluate the kinetics of wet materials drying.
Problem obróbki cieplnej wilgotnych materiałów obejmuje zagadnienia transferu ciepła i masy wewnątrz komponentu (problem wewnętrzny) i w warstwie granicznej z przemianą fazową (problem zewnętrzny). Ilość usuwanej wilgoci zależy od stopnia rozwoju każdego z tych procesów. Po podgrzaniu zawartość wilgoci na powierzchni zmniejsza się, tworząc różnicę koncentracji w całym materiale. Dlatego w materiale występuje przepływ wilgoci z głębokich warstw na powierzchnię, na którą skierowany jest przepływ ciepła. Oznacza to, że gdy ogrzewane są wilgotne materiały, zachodzą złożone procesy wymiany wilgoci i ciepła, wpływając wzajemnie na entalpię i zawartość wilgoci zarówno ogrzewanego materiału, jak i środowiska.W artykule omówiono cechy budowy modelu matematycznego procesu ogrzewania i suszenia materiałów zawilgoconych. Proces suszenia definiuje się jako proces termiczny o efektywnych współczynnikach przenikania ciepła z uwzględnieniem transferu masy. Umożliwia uzyskanie zależności analitycznych dogodnych do obliczeń inżynierskich, za pomocą których można określić pole temperatury i ocenić kinetykę suszenia wilgotnych materiałów.
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 1; 347-358
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Burial and thermal history of the Lower Palaeozoic petroleum source rocks at the SW margin of the East European Craton (Poland)
Autorzy:
Botor, Dariusz
Golonka, Jan
Anczkiewicz, Anneta A.
Dunkl, István
Papiernik, Bartosz
Zając, Justyna
Guzy, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/191816.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
maturity modelling
shale gas
shale oil
burial history
thermal history
Palaeozoic
East European Craton
Opis:
Thermal maturity modelling was carried out in over sixty wells along the SW margin of the East European Craton (EEC). The burial and thermal history modelling of the EEC, using thermochronological data, allowed the construction of burial history maps showing its geological development in the Phanerozoic. These results have proved that the Ordovician and Silurian source rocks occurring at the SW margin of the EEC reached a maximum palaeotemperature in the Palaeozoic, mainly during Devonian-Carboniferous time and at the latest during the Silurian in the most westerly part of this margin, along the Teisseyre-Tornquist Zone. In Mesozoic and Cainozoic time, the Ordovician and Silurian strata generally were subjected to cooling or to very minor heating, certainly below the Variscan level. The maximum burial and maximum temperature of the Ediacaran-Lower Palaeozoic strata were reached during the Early Carboniferous in the Baltic Basin and during the Late Carboniferous in the Lublin area, and even in the Early Permian in the SE corner of the Lublin Basin. Thus, the main period of maturation of organic matter and hydrocarbon generation in the Ordovician and Silurian source rocks was in the Late Palaeozoic (mainly Devonian-Carboniferous) and in the westernmost zone along the Teisseyre-Tornquist line at the end of the Silurian.
Źródło:
Annales Societatis Geologorum Poloniae; 2019, 89, 2; 121-152
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compact Thermal Models of Semiconductor Devices : a Review
Autorzy:
Górecki, Krzysztof
Zarębski, Janusz
Górecki, Paweł
Ptak, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/226308.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
compact thermal models
thermal phenomena
semiconductor devices
modelling
Opis:
In the paper the problem of modelling thermal properties of semiconductor devices with the use of compact models is presented. This class of models is defined and their development over the past dozens of years is described. Possibilities of modelling thermal phenomena both in discrete semiconductor devices, monolithic integrated circuits, power modules and selected electronic circuits are presented. The problem of the usefulness range of compact thermal models in the analysis of electronic elements and circuits is discussed on the basis of investigations performed in Gdynia Maritime University.
Źródło:
International Journal of Electronics and Telecommunications; 2019, 65, 2; 151-158
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies