Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "temperature response" wg kryterium: Temat


Tytuł:
Central limit theorem and the short-term temperature response of coleoptile and hypocotyl elongation growth
Autorzy:
Lewicka, S
Pietruszka, M.
Powiązania:
https://bibliotekanauki.pl/articles/56965.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
temperature
coleoptile
hypocotyl
elongation growth
temperature response
plant biology
Opis:
In this contribution we deal with a new mathematical description of the response of short-term coleoptile/hypocotyl expansion growth to temperature. Although the interest of both the bio-mechanical basis of elongation growth and temperature responses has been studied in plant biology and biophysics for a long time, yet the question of the mode of actions of temperature is very relevant and still open. Here we introduce a simple idea that the normal distribution, due to the central limit theorem (CLT), is able to report on temperature-dependent elongation growth. The numerical fittings for temperature affected growth are in good agreement with empirical data. We suggest that the observation concerning a crossover effect occurring in temperature driven elongation together with CLT leads to the formulation of a hypothesis about the possible universal character of such a description, supposedly for many plant species and families. We conclude with the statement that properly constructed equations of temperature affected growth, should possibly include a specific term proportional to exp[-((T-T0)/T0)2] with T0 corresponding to the temperature of the optimum growth.
Źródło:
Acta Societatis Botanicorum Poloniae; 2008, 77, 4; 289-292
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural analysis for ships in arctic conditions
Autorzy:
Ehlers, S.
Powiązania:
https://bibliotekanauki.pl/articles/135490.pdf
Data publikacji:
2017
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
probabilistic ice loads
mission-based design
damage mitigation
low temperature response
probabilistic approach
collision scenario
Opis:
Ships are operating in regions with seasonal ice coverage outside the Baltic Sea. Due to the lack of experience operating in regions such as the Arctic Sea, existing design guidelines may not lead to reliable and safe ships. This article summarises regulatory aspects of ship design for ice-covered waters, focusing on structural compliance and design ice load determination. The latter will be obtained using a probabilistic approach and compared to the current rule-based load. Based on the discrepancy and the existence of ice induced damage, different measures aimed at mitigating damage are presented. Furthermore, the influence of sub-zero temperature (SZT) in a collision scenario on the material response is presented.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2017, 52 (124); 9-18
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Simulation of a Room Temperature HgCdTe Long-Wave Detector for Fast Response - Operating Under Zero Bias Conditions
Autorzy:
Martyniuk, P.
Kopytko, M.
Madejczyk, P.
Henig, A.
Grodecki, K.
Gawron, W.
Rutkowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/221111.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
response time
unbiased condition
HgCdTe
LWIR
higher operating temperature
Opis:
The paper reports on a long-wave infrared (cut-off wavelength ~ 9 μm) HgCdTe detector operating under nbiased condition and room temperature (300 K) for both short response time and high detectivity operation. The ptimal structure in terms of the response time and detectivity versus device architecture was shown. The response time of the long-wave (active layer Cd composition, xCd = 0.19) HgCdTe detector for 300 K was calculated at a level of τs ~ 1 ns for zero bias condition, while the detectivity - at a level of D* ~ 109 cmHz1/2/W assuming immersion. It was presented that parameters of the active layer and P+ barrier layer play a critical role in order to reach τs ≤ 1 ns. An extra series resistance related to the processing (RS+ in a range 5-10 Ω) increased the response time more than two times (τs ~ 2.3 ns).
Źródło:
Metrology and Measurement Systems; 2017, 24, 4; 729-738
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the multiple damages and temperature changes on the natural frequency
Autorzy:
Mohammadi Esfarjani, S.
Salehi, M.
Ghassemi, A.
Powiązania:
https://bibliotekanauki.pl/articles/279351.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
structural health monitoring
damage detection
vibration response
temperature
natural frequency
Opis:
Damage detection based on structural dynamic characteristics, such as natural frequencies and mode shapes, is an important area of research. Obtaining accurate structural dynamic characteristics is perhaps the most challenging aspect. In particular, changes in environmental temperature due to seasonal weather or radiation from sunshine leads to changes in the dynamic characteristics of structures. An important conclusion is that changes in the dynamic characteristics of a structure due to damage may be smaller than changes in the dynamic characteristics due to variations in temperature. Also, damage can affect the frequency response. This is the first study of evaluation of the effect of changes in temperature and multiple damages on natural frequency at the same time. In this paper, the simultaneous effect of the multiple defects and temperature on the natural frequencies of 6063 aluminum alloy beam are assessed numerically. ABAQUS finite element software is used for the numerical analysis. The present paper aims to evaluate the temperature effect and multiple damages on vibration responses. The variations in the frequency have been analysed in simulation by using an aluminum specimen and obtaining impedance signatures at temperatures ranging from −200◦C to 204◦C. The results show that an increase in temperature leads to a decrease in structural frequency, and that a decrease in temperature leads to an increase in structural frequency. The evaluation of the effect of multiple defects on natural frequency shows that when damages are created in the structure, there is a significant decrease in the natural frequency responses of the 6063 aluminum alloy beam. The results show that damage causes a decrease in the natural frequency of the structure. This study highlights the importance of applying simulation methods to the evaluation of the effect of changes in environmental temperature and multiple damages on the dynamic characteristics such as natural frequencies and mode shapes, especially at the same time.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 3; 813-822
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A comparative study of face milling of D2 steel using AL2O3 based nanofluid minimum quantity lubrication and minimum quantity lubrication
Autorzy:
Ahsan Ul Haq, Muhammad
Khan, Aqib Mashood
Gong, Le
Xu, Tao
Meng, Longhui
Hussain, Salman
Powiązania:
https://bibliotekanauki.pl/articles/103049.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
face milling
temperature
response surface methodology
steel
temperatura
metodologia powierzchni odpowiedzi
stal
Opis:
This study aims to investigate the effects of process parameters: feed, depth of cut and flow rate, on the temperature during face milling of the D2 tool steel under two different lubricant conditions, Minimum Quantity Lubrication (MQL) and Nano fluid Minimum Quantity Lubrication (NFMQL). Deionized water with the flow rate range 200–400 ml/h was used in MQL. 2% by weight concentration of Al2O3 nano particles with deionized water as a base fluid used as NFMQL with the same flow rate. Response surface methodology RSM central composite design CCD was used to design experiment run, modeling and analysis. ANOVA was used for the adequacy and validation of the system. The comparison shows that NFMQL condition reduced temperature more efficiently during machining.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 1; 99-105
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dependence of immune response of Arion vulgaris (Moquin-Tandon, 1855) on the diet and temperature
Autorzy:
Zajac, K.
Drobniak, S.
Homa, J.
Kubler, D.
Kramarz, P.
Powiązania:
https://bibliotekanauki.pl/articles/83723.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Tematy:
dependence
immune response
Arion vulgaris
diet
temperature
snail
immunology
mollusc
immune system
Źródło:
Folia Malacologica; 2016, 24, 1
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrogen Detection With a Gas Sensor Array – Processing and Recognition of Dynamic Responses Using Neural Networks
Autorzy:
Gwiżdż, P.
Brudnik, A.
Zakrzewska, K.
Powiązania:
https://bibliotekanauki.pl/articles/221723.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas sensor
sensor array
temperature modulation
dynamic response
feature extraction
neural networks
Opis:
An array consisting of four commercial gas sensors with target specifications for hydrocarbons, ammonia, alcohol, explosive gases has been constructed and tested. The sensors in the array operate in the dynamic mode upon the temperature modulation from 350°C to 500°C. Changes in the sensor operating temperature lead to distinct resistance responses affected by the gas type, its concentration and the humidity level. The measurements are performed upon various hydrogen (17-3000 ppm), methane (167-3000 ppm) and propane (167-3000 ppm) concentrations at relative humidity levels of 0-75%RH. The measured dynamic response signals are further processed with the Discrete Fourier Transform. Absolute values of the dc component and the first five harmonics of each sensor are analysed by a feed-forward back-propagation neural network. The ultimate aim of this research is to achieve a reliable hydrogen detection despite an interference of the humidity and residual gases.
Źródło:
Metrology and Measurement Systems; 2015, 22, 1; 3-12
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oak (Quercus spp.) response to climate differs more among sites than among species in central Czech Republic
Autorzy:
Rybnicek, M.
Cermak, P.
Prokop, O.
Zid, T.
Trnka, M.
Kolar, T.
Powiązania:
https://bibliotekanauki.pl/articles/41078.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
oak
Quercus
plant response
climatic parameter
precipitation
temperature
tree ring
Czech Republic
Opis:
Climatic parameters are the main environmental factors affecting tree growth. The main aim of the presented study was to determine whether different oak species growing under contrasting environmental conditions show different sensitivity to climatic parameters. Four oak stands with Quercus robur, Quercus petraea, Quercus polycarpa and Quercus dalechampii growing in the same area were evaluated. Standard dendrochronological methods were used for sample preparation, ring width measurements, cross-dating, chronology development, and the assessment of growth-climate response patterns. Although the species grew under different environmental conditions, their local tree-ring chronologies are highly correlated. The radial growth responses to climatic parameters differ slightly, but the response depends more on local site conditions than on the oak species. At the same time, the strongest correlations between radial growth and climatic parameters were identical among species and sites. The amount of water available in the soil was the main climate-dependent factor limiting radial growth. Approximately since the 1990s, the distribution of rainfalls within the growing season has changed at the expense of spring precipitation. The significance of relative soil moisture content during spring for oak growth increased and the significance of summer values decreased.
Źródło:
Dendrobiology; 2016, 75
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of bacterial populations, temperature and exogenous hydrogen peroxide on the induction of the hypersensitive response in Nicotiana tabacum against Xanthomonas perforans
Autorzy:
Farahani, A.S.
Taghavi, S.M.
Powiązania:
https://bibliotekanauki.pl/articles/65481.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bacteria population
temperature
catalase
hydrogen peroxide
hypersensitive response
Nicotiana tabacum
Xanthomonas perforans
Opis:
The objective of this study was to investigate the effects of inoculum concentration, plant post-inoculation incubation temperature and exogenous hydrogen peroxide (H2O2) on the induction of the hypersensitive response (HR) in Nicotiana tabacum against Xanthomonas perforans. Inoculation of leaves with X. perforans at a concentration of 108 CFU · ml–1 and incubation of plants at 30°C resulted in the strongest HR elicitation. Furthermore, an exogenous supply of H2O2 accelerated X. perforans-induced HR, whereas in planta H2O2 removal by application of catalase led to a delay in HR development. Our data suggest that H2O2 has an important role in HR of N. tabacum against X. perforans.
Źródło:
Journal of Plant Protection Research; 2017, 57, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diurnal dynamics of stomatal conductance and leaf temperature of grapevines (Vitis vinifera L.) in response to daily climatic variables
Dobowa dynamika przewodności szparkowej i temperatury liści winorośli (Vitis vinifera L.) w reakcji na dzienne zmienne klimatyczne
Autorzy:
Sabir, A.
Yazar, K.
Powiązania:
https://bibliotekanauki.pl/articles/11543007.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
diurnal dynamics
stomatal conductance
grapevine
leaf
temperature
Vitis vinifera
plant response
climate change
sunlight
Opis:
Few studies examined the stomatal conductance (gs) characteristics of grapevines with an emphasis on daily climatic responses. In the present study, diurnal measurements on leaf temperature and gs of three grapevine cultivars (Alphonse Lavallée, Crimson Seedless and Italia) were carried out. The leaf temperature values for the cultivars at 08:30 were 25.0 ±1°C and it increased to a maximum value between 12:00 and 14:50 p.m. After an almost steady course, it decreased along with the decrease in ambient temperature. The gs values increased from morning (08:30 a.m.) to mid-morning (10:30 a.m.) for all the cultivars. After reaching a peak level at mid-morning, the gs decreased gradually from the mid-morning throughout the afternoon. In the morning, the highest and the least gs values were obtained from Italia (232 mmol H2O m-2 s-1) and Crimson Seedless (149.6 mmol H2O m-2 s-1) cultivars. At around 10:30, the gs for Italia, Crimson Seedless and Alphonse Lavallée were at the highest levels with their valus 287.7, 262.1 and 242.0 mmol H2O m-2 s-1, respectively. The last measurements on gs at around 16:10 varied from to 96.7 (Italia) to 112.0 mmol H2O m-2 s-1 (Alphonse Lavallée). During the daily time course, the gs depended mainly on irradiance. Tleaf showed a strong relationship with Tair for all the cultivars. There was a strong, but negative correlation between leaf temperature and air humidity for all the cultivars.
Istnieje niewiele badań, które zajmowały się cechami przewodności szparkowej (gs) winorośli z akcentem na dzienne zmienne klimatyczne. W niniejszym badaniu przeprowadzono pomiary temperatury liści oraz gs trzech odmian winorośli (Alphonse Lavallée, Crimson Seedless i Italia). Temperatura liści u tych odmian o godzinie 8.30 wynosiła 25,0 ±1°C i zwiększała się do maksymalnej wartości między 12.00 a 14.50. Po okresie prawie wyrównanych wartości temperatura spadała wraz ze spadkiem temperatury otoczenia. Wartości gs rosły w godzinach porannych (8.30–10.30) dla wszystkich odmian. Po osiągnięciu poziomu szczytowego, gs stopniowo zmniejszała się począwszy od godzin rannych przez całe popołudnie. Największe i najmniejsze wartości gs rano osiągnięto u odmian Italia (232 mmol H2O m-2 s-1) i Crimson Seedless (149,6 mmol H2O m-2 s-1). Około 10.30 wartości gs dla Italia, Crimson Seedless oraz Alphonse Lavallée były największe i wynosiły, odpowiednio, 287,7; 262;1 i 242,0 mmol H2O m-2 s-1. Ostatni pomiar gs około 16.10 wskazywał od 96,7 (Italia) do 112,0 mmol H2O m-2 s-1 (Alphonse Lavallée). Podczas dnia gs zależał głównie od napromieniowania. Tliść wykazywał silny związek a Tpowietrze dla wszystkich odmian.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2015, 14, 4; 3-15
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seed germination and emergence of Eragrostis tenuifolia (A. Rich.) Hochst. ex Steud. in response to environmental factors
Autorzy:
Bittencourt, H.H.
da Silva Bonome, L.T.
de Bortoli Pagnoncelli,Jr, F.
Lana, M.A.
Muzell Trezzi, M.
Powiązania:
https://bibliotekanauki.pl/articles/65859.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
seed germination
emergence
Eragrostis tenuifolia
elastic grass
weed
plant response
environmental factor
irradiance
temperature
weed ecology
weed number
Opis:
Eragrostis tenuifolia is a weed species that is gaining ground in Brazil. This weed occurs in pastures, grasslands, crop fields, and roadsides. The objective of this study was to examine the effects of different environmental factors on E. tenuifolia seed germination and seedling emergence. The optimum constant temperature for germination was around 35–30°C. It was also found that 85% of seeds germinated under a 30/20°C alternate temperature regime. Light appears to have a positive effect on seed germination. No seedlings emerged when seeds were buried 3 cm or deeper. The results suggested that E. tenuifolia has the potential to spread into pastures and in no-tillage crop systems in Brazil. Measures such as the use of cover crops and/or soil cultivation can be used to limit germination and seedling emergence, respectively.
Źródło:
Journal of Plant Protection Research; 2016, 56, 1
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth responses of Picea abies to climate in the central part of the Ceskomoravska Upland (Czech Republic)
Autorzy:
Rybnicek, M.
Cermak, P.
Zid, T.
Kolar, T.
Powiązania:
https://bibliotekanauki.pl/articles/41537.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
growth response
Picea abies
Norway spruce
precipitation
temperature
climate
environmental factor
tree ring
biomass
Ceskomoravska Upland
Czech Republic
Opis:
The aims of the study were to determine the effect of temperatures and precipitation on the ring width and to compare the results with the results of previous studies conducted in other mountain ranges of the Czech Republic. The research was performed in the central part of the Ceskomoravská Upland in the vicinity of Herálec municipality in selected 70- up to 110-year-old spruce stands at altitudes from 680ma.s.l. to 779 m a.s.l. Measuring of tree-ring widths and synchronization of individual ring series were conducted in PAST4. The age trend was removed by ARSTAN and climatic effects were modelled in DendroClim2002. The correlation of tree-ring width with monthly precipitation is positive and statistically significant for July of the previous year and for the entire summer period from June to September of the current year. The correlation of tree-ring width with mean monthly temperatures is negative and statistically significant for July and September and positive and statistically significant for October of the previous year. Negative correlation was also found for temperatures of the entire summer period from June to September of the previous year. The regional tree-ring chronology mainly shows two periods of highly reduced increment: from 1992 to 1996 and from 2003 to the end of the analysed period. The results thus confirm the hypothesis that the tree-ring width is in positive correlation with summer precipitation and negative correlation with summer temperatures. Also the results of the habitual diagnostics have shown a relatively low degree of crown transformation which indicates a weak or short-term stress load.
Źródło:
Dendrobiology; 2012, 68
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of response surface methodology and fuzzy logic based system for determining metal cutting temperature
Autorzy:
Tanikić, D.
Marinković, V.
Manić, M.
Devedžić, G.
Ranđelović, S.
Powiązania:
https://bibliotekanauki.pl/articles/199818.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
machining
cutting temperature
infrared thermography
response surface methodology
fuzzy logic
obróbka
temperatura cięcia
termografia w podczerwieni
metodologia odpowiedzi powierzchni
logika rozmyta
Opis:
The heat produced in metal cutting process has negative influence on the cutting tool and the machined part in many aspects. This paper deals with measurement of cutting temperature during single-point dry machining of the AISI 4140 steel, using an infrared camera. Various combinations of cutting parameters, i.e. cutting speed, feed rate and depth of cut lead to different values of the measured cutting temperature. Analysis of the measured data should explain the trends in temperature changes depending on changes in the cutting regimes. Furthermore, the temperature data is modelled using response surface methodology and fuzzy logic. The models obtained should determine the influence of cutting regimes on cutting temperature. The main objective is the reduction of cutting temperature, i.e. enabling metal cutting process in optimum conditions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 2; 435-445
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical research response time of the mechanism for compression ratio changing of the conrod-free engine
Autorzy:
Kolesnikova, Tatiana
Mischenko, Nikolay
Sakno, Olha
Suprun, Volodymyr
Filipova, Galynaa
Nikitchenko, Igor
Gorpyniuk, Andrii
Nazarenko, Mykola
Powiązania:
https://bibliotekanauki.pl/articles/198632.pdf
Data publikacji:
2019
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
mechanism for compression
ratio changing
connecting rod
crank mechanism
conrod-free engine
response time
pressure
oil temperature
mechanizm kompresji
zmiana współczynnika
korbowód
mechanizm korbowy
silnik bezkorbowy
czas odpowiedzi
ciśnienie
temperatura oleju
Opis:
The mathematical model for calculating the response time of the compression ratio of the mechanism for compression ratio changing (MCRC) is presented in this article. This revealed the influence of various engine factors with the connecting rod and crank mechanism (CRCM) on the operation of the MCRC (for example, the rate of the compression ratio change). The results of the study of the operation of the MCRC indicate a strong influence of the values (relative area of flow passage of channels) and р (pressure) on the response time τ in the field of their small values. This indicates that with insignificant changes of the area of flow passage of channel of the hydraulic lock and the minute oil pressure in the cavities, a significant response rate of the MCRC is ensured. The results demonstrate the possibility of speedy compression ratio change in the engine with the MCRC. Calculation studies showed that the mechanism full operation occurs quickly (0.02 s per unit εx), which indicates the expediency of using such a high-pressure pump in a four-stroke gasoline engine with CRCM. The mechanism movable body complete movement (S = 4 mm) at the oil temperature in the hydraulic system of 45°C and pressure on the body of p = 60 bar are stated to occur for 0.2 s.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2019, 104; 69-83
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie zaawansowanej metody oceny odporności ogniowej w budownictwie przemysłowym
Application of advanced fire resistance assessment method for industrial structures
Autorzy:
Woźniczka, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/128943.pdf
Data publikacji:
2020
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
ocena odporności
odporność ogniowa
hala stalowa
symulacja
rozwój pożaru
odpowiedź mechaniczna
modelowanie konstrukcji
temperatura krytyczna
model zniszczenia
resistance assessment
fire resistance
steel hall
simulation
fire development
mechanical response
structure modelling
critical temperature
failure mode
Opis:
W artykule przedstawiono przykład opracowanej oceny odporności ogniowej obiektu przemysłowego. Dla rozpatrywanej hali maszynowni o konstrukcji stalowej zaprezentowano wyniki symulacji rozwoju pożaru oraz odpowiedzi mechanicznej konstrukcji. Obliczenia przeprowadzono za pomocą zaawansowanych programów komputerowych. Omówiono wpływ takich czynników, jak nierównomierne ogrzewanie oraz sposób modelowania konstrukcji na szacowaną odporność ogniową. Wskazano także wartości temperatury krytycznej oraz prognozowane modele zniszczenia. Wykazano, że omawiana metoda może być z powodzeniem stosowana w odniesieniu do rozpatrywanej kategorii obiektów.
Both fire development and mechanical response analysis of the steel turbine hall are described. Factors like non-uniform heating and way of structural modeling and their impact on the anticipated fire resistance of the structure are discussed. Moreover, values of the crictical temperature and predicted failure modes are given. As a result it is shown that described method is appropriate for the considered type of buildings.
Źródło:
Builder; 2020, 24, 4; 58-60
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies