Temat: technologie odlewnicze - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Attempts to Prepare Precision Composite Castings by Sintering Al2O3/AlSi11 Using Underpressure
Autorzy:: Szymański, P.
Gawdzińska, K.
Nagolska, D.
Powiązania:: https://bibliotekanauki.pl/articles/381239.pdf
Data publikacji:: 2020
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
composites
rapid prototyping
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
kompozyty
prototypy
Opis:: This article presents the preparation of composite casts made using the technology of precise casting by the method of melted models. The composite was reinforced with the ceramic sinter from Al2O3 particle shaped in a printed polystyrene female mould, which was fired together with precured ceramics. The resulting ceramic preform, after being saturated with paraffin and after the filling system is installed, was filled with liquid moulding sand and fired together with the mould. The reinforcement was saturated by means of the counter-pressure exerting action on the metal column, being a resultant of pressures inside and outside the chamber. The preliminary assessment showed no apparent defects in the shape of the cast. The casting was measured and the figures were compared with the dimensions of the matrix in which the reinforcing preform was made, the preform after firing and after saturation with paraffin. The results were presented in a table and dimensional deviations were determined. The composite casting was subjected to metallographic tests, which excluded any porous defects or damage to the reinforcement. It can therefore be said that, according to the predictions resulting from the previous calculations, the pressure values used allowed for complete filling of the reinforcement capillaries. The proposed method is therefore suitable for the preparation of precision composite castings with complex shapes.
Źródło:: Archives of Foundry Engineering; 2020, 20, 1; 49-54
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The silumin coat structure on alloy ductile iron
Autorzy:: Szymczak, T.
Powiązania:: https://bibliotekanauki.pl/articles/383363.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
żeliwo sferoidalne
silumin
innovative casting technologies
dip coats
alloy ductile iron
Opis:: The work presents the research results of the silumin coat structure applied on the carbidic alloy ductile iron with the metal matrix: pearlitic, bainitic and martensitic. The coats were made in the AlSi5 silumin bath at the temperature t_k = 750±5ºC. The holding time of cast iron element in the bath was \tau = 180s. Irrespective of the kind of tested ductile iron the obtained coat consisted of three layers with a different phase composition. The first layer from the cast iron ground “g₁” is built from Fe₄CSi carbide which contains selected alloy additives of the cast iron. On it the second layer “g₁” crystallizes. It consists of the AlFeSi inter-metallic phase which can appear in its pure form or contain a small quantity of the alloy additives of the cast iron. The last external part of the layer “g₂” mainly consists of the hypo-eutectic phases of silumin. The AlFeSi inter-metallic phases in the form of free precipitations with a lamellar or faceted morphology can also appear there. These phases also can contain a small quantity of the alloy additives of the cast iron. More than that, in all the layers of the coat there are graphite precipitations. The phenomenon of graphite movement to the coat is caused by intensive dissolving of the cast iron element surface by the aluminum of the silumin bath.
Źródło:: Archives of Foundry Engineering; 2013, 13, 1; 119-124
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Application of microwaves for binder content assessment in moulding sands
Autorzy:: Nowak, D.
Powiązania:: https://bibliotekanauki.pl/articles/380212.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
masa formierska
spoiwo
mikrofale
innovative foundry technologies
moulding sand
binder
microwaves
Opis:: The paper presents results of preliminary examinations on possibility of determining binder content in traditional moulding sands with the microwave method. The presented measurements were carried-out using a special stand, the so-called slot line. Binder content in the sandmix was determined by measurements of absorption damping Ad and insertion losses IL of electromagnetic wave. One of main advantages of the suggested new method of binder content measurement is short measuring time.
Źródło:: Archives of Foundry Engineering; 2012, 12, 3; 83-86
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Comprehensive Assessment of Polymeric Materials for Foundry Tooling Used in Microwave Field
Kompleksowa ocena materiałów polimerowych na oprzyrządowanie odlewnicze stosowane w polu mikrofalowym
Autorzy:: Stachowicz, M.
Opyd, B.
Granat, K.
Powiązania:: https://bibliotekanauki.pl/articles/355413.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
microwaves
abrasive wear resistance
foundry tooling
innowacyjne technologie odlewnicze
mikrofale
odporność na ścieranie
oprzyrządowanie odlewnicze
Opis:: The paper presents a research on abrasion resistance of selected construction materials designed for foundry tooling applied in the innovative microwave heating process of moulding and core sands. One of the main selection criteria of the materials for foundry tooling, in particular for models, moulding boards, moulding boxes and core boxes, is their good abrasive wear resistance. Usability of the selected polymeric materials, designed for foundry tooling used in electromagnetic field, is decided also by other evaluation criteria determined in the examinations, like thermal resistance and electrical properties. Abrasion resistance of the selected materials was determined for three grades of the moulding sand matrixes. Combined analysis of the determined abrasion resistance, considering also electrical properties and thermal resistance of the foundry tooling materials, characterising their usability for microwave heating of moulding and core sands, will make possible their systemising with respect to effectiveness and efficiency of the heating process, taking under consideration durability of such foundry tooling to be used in industrial conditions.
W pracy zaprezentowano wyniki badań odporności na ścieranie wybranych materiałów konstrukcyjnych przeznaczonych do budowy oprzyrządowania odlewniczego przewidywanego do zastosowania w innowacyjnym procesie nagrzewania mikrofalowego mas formierskich i rdzeniowych. Jednym z głównych kryteriów doboru materiałów na elementy oprzyrządowania odlewniczego, w szczególności: modele, płyty podmodelowe, skrzynki formierskie i rdzennice, jest ich dobra odporność na zużycie ścierne. O przydatności wybranych materiałów polimerowych, przewidzianych do budowy oprzyrządowania stosowanego w polu elektromagnetycznym, decydują również, określone w badaniach, inne kryteria oceny, do których należą: odporność termiczna oraz właściwości elektryczne. Badania odporności na zużycie ścierne, wybranych materiałów oprzyrządowania, określono dla trzech różnych gatunków osnowy mas (ścierniwa). Analiza wyników oznaczenia odporności na ścieranie, powiązana z właściwościami elektrycznymi oraz odpornością termiczną materiałów oprzyrządowania, charakteryzujących ich przydatność w mikrofalowym nagrzewaniu mas formierskich i rdzeniowych, umożliwi ich usystematyzowanie pod względem skuteczności i efektywności procesu nagrzewania z jednoczesnym uwzględnieniem trwałości takiego oprzyrządowania odlewniczego dla zastosowania w warunkach przemysłowych.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 1; 335-339
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: New look at the process of reclamation of moulding sands
Autorzy:: Dobosz, S. M.
Major-Gabryś, K.
Hosadyna, M.
Powiązania:: https://bibliotekanauki.pl/articles/380262.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
masa formierska
innovative foundry materials
innovative foundry technologies
moulding sand
reclaim
ester hardener
Opis:: This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials rests, it should be chosen the proper moulding sand's composition that will be least harmful for the reclaim quality. There are two different moulding and core sands taken into examinations. The researches prove that a small correction of their compositions (hardener type) improves the quality of the received reclaims. Carried out in this article studies have shown that such an approach to the problem of reclamation of the moulding and core sands is needed and reasonable.
Źródło:: Archives of Foundry Engineering; 2012, 12, 3; 19-24
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Casting routes for porous metals production
Autorzy:: Lichý, P.
Bednarova, V.
Elbel, T.
Powiązania:: https://bibliotekanauki.pl/articles/382433.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
rozwój produktu
pianka metalowa
innovative foundry technologies
innovative foundry material
product development
metal foams
Opis:: The last decade has seen growing interest in professional public about applications of porous metallic materials. Porous metals represent a new type of materials with low densities, large specific surface, and novel physical and mechanical properties, characterized by low density and large specific surface. They are very suitable for specific applications due to good combination of physical and mechanical properties such as high specific strength and high energy absorption capability. Since the discovery of metal foams have been developed many methods and techniques of production in liquid, solid and gas phases. Condition for the use of metal foams - advanced materials with unique usability features, are inexpensive ways to manage their production. Mastering of production of metallic foams with defined structure and properties using gravity casting into sand or metallic foundry moulds will contribute to an expansion of the assortment produced in foundries by completely new type of material, which has unique service properties thanks to its structure, and which fulfils the current demanding ecological requirements. The aim of research conducted at the department of metallurgy and foundry of VSB-Technical University Ostrava is to verify the possibilities of production of metallic foams by conventional foundry processes, to study the process conditions and physical and mechanical properties of metal foam produced. Two procedures are used to create porous metal structures: Infiltration of liquid metal into the mold cavity filled with precursors or preforms and two stage investment casting.
Źródło:: Archives of Foundry Engineering; 2012, 12, 1; 71-74
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Evaluation of reclamability of molding sands with new inorganic binders
Autorzy:: Izdebska-Szanda, I.
Baliński, A.
Angrecki, M.
Powiązania:: https://bibliotekanauki.pl/articles/382753.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
spoiwo nieorganiczne
wytrzymałość
innovative foundry material
innovative foundry technologies
inorganic binders
reclamation
reclamability
strength
Opis:: One of the purposes of the application of chemically modified inorganic binders is to improve knocking out properties and the related reclamability with previously used in foundry inorganic binder (water glass), which allowing the use of ecological binders for casting nonferrous metals. Good knocking out properties of the sands is directly related to the waste sands reclamability, which is a necessary condition of effective waste management. Reclamation of moulding and core sands is a fundamental and effective way to manage waste on site at the foundry, in accordance with the Environmental Guidelines. Therefore, studies of reclamation of waste moulding and core sands with new types of inorganic binders (developed within the framework of the project) were carried out. These studies allowed to determine the degree of recovery of useful, material, what the reclaimed sand is, and the degree of its use in the production process. The article presents these results of investigation. They are a part of broader research programme executed under the project POIG.01.01.02-00-015/09 'Advanced materials and technologies'.
Źródło:: Archives of Foundry Engineering; 2012, 12, 2; 35-40
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Rapid Prototyping Technology Using for Casting Process of Mini Turbine Runner
Autorzy:: Hościło, B
Kaczyński, R.
Skorulski, G.
Powiązania:: https://bibliotekanauki.pl/articles/383216.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
rapid prototyping
ceramic moulds
miniturbine runner
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
formy ceramiczne
Opis:: The previous mini-hydrogenator rotors’ prototypes were made of ABS thermoplastic material with use of fused deposition modelling (FDM). However, there is a need for such rotors made of metallic materials with higher strength. In paper three dimensional printing (3DP) as rapid prototyping technology, was presented, to execute a shell mould of rotor prototype. In initial phase, the moulds were prepared which allow to cast a simple geometric solid with different alloys, for comparative reasons. The form of rotor and testing cast moulds were designed using universal CAD environment and printed composite using material zp151 (Calcium sulfate hemihydrate) with a binder zb63 (2- pyrrolidone) for preparation of colourful presentation models or casting models. The suitability of technology usage with alloys of copper , aluminium and zinc, was analyzed. The strength of the mould during casting, a material resistant to high temperature, the quality of received casting and its surface roughness were assumed as the comparative parameters which characterized method.
Źródło:: Archives of Foundry Engineering; 2014, 14, 1 spec.; 83-86
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: The Tendency of Moulding Sands to Generate Core Cracks
Autorzy:: Grabarczyk, A.
Dobosz, S. M.
Kusiński, J.
Major-Gabryś, K.
Powiązania:: https://bibliotekanauki.pl/articles/380432.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
moulding sand
binder
elasticity
cracking
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
masa formierska
spoiwo
Opis:: The constant growth of foundry modernization, mechanization and automation is followed with growing requirements for the quality and parameters of both moulding and core sands. Due to this changes it is necessary to widen the requirements for the parameters used for their quality evaluation by widening the testing of the moulding and core sands with the measurement of their resistance to mechanical deformation (further called elasticity). Following article covers measurements of this parameter in chosen moulding and core sands with different types of binders. It focuses on the differences in elasticity, bending strength and type of bond destruction (adhesive/cohesive) between different mixtures, and its connection to the applied bonding agent. Moulding and cores sands on which the most focus is placed on are primarily the self-hardening moulding sands with organic and inorganic binders, belonging to the group of universal applications (used as both moulding and core sands) and mixtures used in cold-box technology.
Źródło:: Archives of Foundry Engineering; 2018, 18, 1; 157-161
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Nowe żywice furfurylowe bardziej przyjazne dla środowiska
New Furfuryl Resins More Environmentally Friendly
Autorzy:: Holtzer, M.
Kmita, A.
Roczniak, A.
Powiązania:: https://bibliotekanauki.pl/articles/383314.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne materiały
technologie odlewnicze
żywice furfurylowe
ochrona środowiska
innovative materials
foundry technologies
furfuryl resin
environmental protection
Opis:: Coraz ostrzejsze przepisy w zakresie ochrony środowiska wymuszają na producentach materiałów dla przemysłu odlewniczego opracowywanie nowych produktów, bardziej przyjaznych dla środowiska. Jednym z takich produktów są żywice furfurylowe, które obecnie mają największy udział w grupie mas no-bake. Wprowadzone w ostatnich latach w UE przepisy dotyczące ograniczenia zawartości wolnego alkoholu furfurylowego (< 25%) w żywicach oraz naciski w kierunku redukcji emisji SO₂, formaldehydu, fenolu, benzenu i toluenu, jak również związków z grupy WWA, szczególnie na stanowiskach pracy spowodowały pojawienie się na rynku nowej generacji żywic furfurylowch oraz katalizatorów (o zmniejszonej zawartości siarki lub bezsiarkowych). W artykule dokonano analizy wpływu tych nowych produktów stosowanych w technologii mas z żywicami furfurylowymi na środowisko i warunki pracy.
More and more strict regulations, concerning the environment protection, force the producers of materials for foundry industry to develop new products, more friendly for the environment. One of such products are furfuryl resins, which currently have the largest share within the group of no-bake moulding sands. Regulations introduced in the last years in the European Union concerning limitations of a free furfuryl alcohol content (< 25%) in resins as well as pressures to reduce SO₂, formaldehyde, phenol, benzene, toluene and compounds from the PAHs group emissions, especially at work stands, caused an appearance of the new generation of furfuryl resins and catalysts (of a decreased sulphur content or even sulphur-free). The analysis of the influence of these new products, applied in the moulding sands with furfuryl resins technology, on the environment and work conditions was performed in the hereby paper.
Źródło:: Archives of Foundry Engineering; 2014, 14, 4 spec.; 47-50
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "technologie odlewnicze" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język