Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "surface tension" wg kryterium: Temat


Tytuł:
Zależność między granicznym kątem zwilżania a średnim napięciem powierzchniowym zwilżania węgli o różnym stopniu zmetamorfizowania
The relationship between contact angle and mean critical surface tension of coals of different rank
Autorzy:
Sablik, J.
Powiązania:
https://bibliotekanauki.pl/articles/318608.pdf
Data publikacji:
2003
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
graniczny kąt zwilżania
węgiel
napięcie powierzchniowe zwilżania
surface tension of wetting
contact angle
critical surface tension
coal
Opis:
Badano empiryczne zależności między granicznym kątem zwilżania powierzchni węgla θ a średnim napięciem powierzchniowym zwilżania γc. Aby uzyskać odpowiednie dane badano 20 próbek węgli kamiennych o różnym stopniu zmetamorfizowania. Stwierdzono zależność funkcyjną między badanymi parametrami, którą ilościowo opisano równaniem regresji. Wykorzystując wartości γc niejednorodności energetycznej w zbiorze ziaren σγc badanych węgli oraz wyżej wymienione równanie określono przedziały wartości, w których mogą się mieścić graniczne kąty zwilżania w zbiorze ziaren danego węgla. Wyznaczono także wartość napięcia powierzchniowego zwilżania γc(θ = 0), powyżej której kąt zwilżania powierzchni węgla wynosi zero. Dla badanych węgli wartość ta wynosi 57,838 mJ/m2. Wykorzystując krzywe rozkładu energii powierzchniowej w zbiorze ziaren, określono udział w danym zbiorze ziaren o kącie zwilżania równym zero.
Empirical relationships between the contact angle of coal surface θ and the mean critical surface tension of wetting γc were investigated. In order to obtain suitable data, 20 hard coal samples of different rank were tested. The functional relationship between investigated parameters was stated, described quantitatively by means of a regression equation. Using the γc. and energetic nonhomogeneity values in the set of particles σγc of tested coals as well as the above mentioned equation, the intervals of values were determined, in which the contact angles in the set of grains of the given coal can be contained. Moreover, the value of surface tension of wetting γc(θ = 0), above which the contact angle of coal surface is equal to zero, was calculated. For tested coals this value amounts to 57.838 mJ/m2. Using curves of surface energy distribution in the set of particles, the share of particles with contact angle equal to zero in the given set was determined.
Źródło:
Inżynieria Mineralna; 2003, R. 4, nr 2, 2; 3-10
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel technique to investigate the bubble coalescence in the presence of surfactant (MIBC) and electrolytes (NaCl and CaCl2)
Autorzy:
Gungoren, C.
İslek, E.
Baktarhan, Y.
Kursun, I.
Ozdemir, O.
Powiązania:
https://bibliotekanauki.pl/articles/110886.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
surface tension
salt
Bubble Coalescence Time Measurement
Opis:
An efficiency of flotation process is strongly dependent upon the collecting ability of air bubbles. On the other hand, the liquid film formed beetween two fully or partially mobile air/liquid interfaces being in contact has low stability, which leads to fast liquid drainage. Therefore, when they approach to each other, they tend to coalescence. Therefore, bubble coalescence is usually controlled with frothers in flotation process. Meanwhile, it is known that dissolved ions inhibit bubble coalescence. In this study, the bubble coalescence in the presence of MIBC was determined using a novel technique with a modified bubble-particle attachment timer. Additionally, the effect of NaCl and CaCl2 on bubble behavior was investigated along with surface tension and bubble coalescence time aspects. As a result of study, it is seen that the bubble coalescence time can be successfully determined with a bubble-bubble coalescence timer.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1215-1222
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of air/water interface in mixed aqueous solutions of KCl, NaCl, and DAH
Autorzy:
Gungoren, Can
Powiązania:
https://bibliotekanauki.pl/articles/110641.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble coalescence
surface tension
KCl
NaCl
DAH
Opis:
Flotation of soluble salts such as borax, potash, and trona is carried out in their saturated solutions. The high ion concentration of the flotation suspension can affect the floatability of the minerals as well as the coalescence behaviors of the bubbles. The bubble coalescence can be inhibited in the presence of dissolved ions at high ion concentrations as well as with the use of surfactants. In this study, the effect of the mixtures of KCl, NaCl, and dodecyl amine hydrochloride (DAH) on air/water interface was investigated with surface tension and bubble coalescence time measurements for potash flotation. The surface tension measurements indicated that lower surface tension values obtained with mixed KCl and NaCl solutions than their single solutions. In addition, the surface tension of the mixed KCl and NaCl solutions increased with the NaCl and the ionic strength of the solution. The dynamic surface tension measurements indicated that while ion adsorption on air/water interface was so fast, DAH molecules required more time for adsorption probably related to the viscosity of the solution. In addition, the bubble coalescence time measurements showed that the bubble coalescence could be inhibited with the use of DAH in the absence and presence of KCl and NaCl. In the absence of DAH, the bubble coalescence time was determined as 100 ms, 270 ms, and 650 ms, respectively for 100% KCl, 100% NaCl, and 50%KCl+50% NaCl salt solutions. Therefore, the trend in the success of the salt solutions for the inhibition of bubble coalescence can be written as 100%KCl<50%KCl+50%NaCl<100% NaCl according to the bubble coalescence time. The results of this study indicated that there was no clear relationship between the surface tension and the inhibition of the bubble coalescence. However, the bubble coalescence time measurements showed that while the bubble coalescence time was 650 ms in the presence of Na+ ions, it was 100 ms in the presence of K+ ions 100 ms. It can be concluded from the results obtained from this study that the bubble coalescence phenomena may be managed by the specific ion pairing types in solutions which significantly affect the flotation recovery of minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1259-1270
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of the influence of the binary mixtures of fluorocarbon surfactants on the surface tension of water
Autorzy:
Taraba, Anna
Szymczyk, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/764007.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
fluorocarbon surfactants, surface tension, binary mixtures of surfactants
Opis:
Influence of the binary mixtures of fluorocarbon surfactants Zonyl FSO-100  (FSO100) and Zonyl FSN-100 (FSN100) on the surface tension of the water was studied. The effectiveness of adsorption process of the surfactant at the water-air interface was calculated from the obtained values of the surface tension of studied mixtures. Also the maximum surface area per molecule of surfactant in the interfacial area  and the free energy at the water-air interface  were determined. Moreover, the existence of synergetizm or antagonism effect, which reduces the surface tension of the water was examined. On the basis of the Rosen's model parameter the values of intermolecular interactions in the mixed monolayer adsorption were calculated.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2017, 72, 1
2083-358X
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dodatku surfaktantu na właściwości elektrochemiczne superkondensatorów
Effect of surfactant on electrochemical properties of supercapacitor
Autorzy:
Szmaja, A.
Szubzda, B.
Powiązania:
https://bibliotekanauki.pl/articles/158597.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
superkondensator
zwilżalność
napięcie powierzchniowe
supercondensator
wettability
surface tension
Opis:
Napięcie powierzchniowe cieczy ma istotny wpływ na transport masy i energii na granicy międzyfazowej. W superkondensatorze, gdzie ładunek gromadzony jest dzięki istnieniu podwójnej warstwy elektrycznej na granicy faz pomiędzy elektrodą a elektrolitem, napięcie powierzchniowe elektrolitu wpływa na zwilżalność i powinowactwo z materiałem węglowej elektrody. Poprawa zwilżalności elektrody przez elektrolit zwiększa dostępność porowatych powierzchni elektrod węglowych dla jonów elektrolitu. Dzięki temu możliwie jest zgromadzenie większej liczby ładunków oraz obniżenie łącznej, wewnętrznej oporności urządzenia. W pracy przedstawiono wpływ zmniejszenia napięcia powierzchniowego – poprawę zwilżalności materiału węglowego elektrolitem na właściwości elektrochemiczne superkondensatora. Zmiany napięcia powierzchniowego realizowano dodając do elektrolitu surfaktanty. Surfakanty dodawano poniżej krytycznego stężenia micelarnego, aby uniknąć tendencji do tworzenia agregatów, które mogą blokować pory węglowej elektrody. Właściwości elektrochemiczne celki kondensatora sprawdzono metodami woltametrii cyklicznej, galwanostatycznego ładowania i rozładowania oraz spektroskopii impedancyjnej.
The surface tension of liquids has a significant impact on the transport of mass and energy at the interface. In case of supercapacitor, where the charge is collected by the existence of electrical double layer at the interface between electrode and electrolyte, surface tension of an electrolyte reflects the wettability and affinity for the electrode material. The improvement of the wettability of electrode in the electrolyte increases the access of electrolyte to the surface of porous carbon electrode and accordingly better charge accumulation is achieved. It also results in a lower internal resistance of cell. In this work, impact of decreasing surface tension and increasing the electrolyte wetting properties on the electrochemical properties of supercapacitor were investigated. Improvement of these properties has been achieved through the inclusion of surfactant to electrolyte. Surfactants were added under critical micelle concentrations (CMC) to avoid surfactant tendency to form aggregates, that can block the pore in carbon electrode. Properties of electrochemical capacitor cell by cyclic voltammetry methods, galvanostatic charge and discharge and impedance spectroscopy were measured.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 259; 97-98
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physicochemical mechanisms of mineral nanoparticles effects on pulmonary gas/liquid interface studied in model systems
Autorzy:
Kondej, D.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/110409.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
inhalation
nanoparticles
gas-liquid interface
dynamic surface tension
Opis:
Inhaled mineral nanoparticles which are deposited on the lung surface may influence the gas/liquid barrier and the pulmonary surfactant (PS) which constitutes the vital element of the respiratory system. This research is focused on the physicochemical effects caused by selected clay nanoparticles (bentonite, halloysite, montmorillonites) interacting with PS and changing its original surface activity. Using three measuring methods (pulsating bubble technique, Langmuir balance and drop shape analysis), we demonstrated the influence of different mineral nanoparticles on the dynamic surface tension of animal-derived PS material (Survanta®) and main surfactant phospholipid (DPPC). The results which are dependent on material properties and concentration allow to hypothesize possible pathways of health effects from inhalation of mineral nanoparticles. This may help to set the guidelines in defining occupational safety standards and methods of protection of the respiratory system against inhaled mineral dusts.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 1; 57-69
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanosensitivity of cell membrane may govern creep-strain recovery, osmotic expansion and lysis
Autorzy:
Pawłowski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1040543.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
mechanosensitivity
caveolae
exocytosis
surface tension
endocytosis
cell membrane
Opis:
A simple theoretical model considering cell membrane mechanosensitivity can accurately describe published experimental data on membrane area creeping and recovery, and on osmotic expansion and rupture. The model to data fit reveals real values of membrane tension and elasticity modulus, and the parameters describing membrane organization and kinetics of mechanosensitive membrane traffic, including small solute transport, water permeability, endocytosis, exocytosis, and caveolae formation. This estimation allows for separation and quantitative analysis of the participation of different processes constituting the response of plasmalemma to short time-scale membrane load. The predicted properties of the model were verified for membrane stretching at different osmotic pressures. Finally, a simple hypothesis concerning stressed cell membrane breakdown is postulated.
Źródło:
Acta Biochimica Polonica; 2009, 56, 3; 471-480
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial studies on lubricity and surface properties of selected ionic liquids
Autorzy:
Kałdoński, T. J.
Stańczyk, M.
Gryglewicz, Ł.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/244598.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
tribology
ionic liquids
surface tension
contact angle
lubrication
Opis:
The paper discusses the results of the studies on the surface properties and lubricating abilities of five ionic liquids compared to a high quality gear oil: Mobilube 1SHC 75W90 and two base oils: PAO-6 and SN-650. The investigated ionic liquids were: 1) tetrafluoroborate 1- benzyl-3-methylmidazolium, 2) bis (trifluoromethylsulfonyl) imide 3-methyl-1- propylpyridinium, 3) bis (trifluoromethylsulfonyl) imide 1,2-dimethyl-3-propylimidazolium, 4) bis (trifluoromethylsulfonyl) imide trihexyltetradecylphosphonium), 5) tetrafluoroborate trihexyltetradecylphosphonium. The density, surface tension and wetting angle as well as dynamic and kinematic viscosity were measured. Next, the lubricity properties were evaluated using the four-ball tester. The research results showed the more better lubricity properties of ionic liquids than the base oils. The research results showed the more better lubricity properties of ionic liquids than the base oils. The ionic liquids had the comparable properties to a high quality gear oil. Obtained results of these preliminary studies confirmed a possibility of using selected ionic liquids as new lubricants. These compounds can probably replace the lubricants used so far and find a wide scope of application in lubrication technology in the future. However, particular implementations require further complex studies.
Źródło:
Journal of KONES; 2011, 18, 1; 213-226
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations on lubricity and surface properties of selected perfluoropolyether oils
Autorzy:
Kałdoński, T. J.
Gryglewicz, Ł.
Stańczyk, M.
Kałdoński, T.
Powiązania:
https://bibliotekanauki.pl/articles/244618.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
tribology
perfluoropolyethers (PFPE)
surface tension
contact angle lubrication
Opis:
In the paper the investigative results of lubricity and surface properties for four synthetic perfluoropolyether (PFPE) oils, comparing with the high quality gear oil Mobilube 1SHC 75W-90 and two base oils PAO-6 and SN-650, are discussed. The goal of the research was to identify anti-wear and anti-seizing properties of PFPE oils correlation with their surface-energetic and viscosity-temperature properties. Modern test equipment was used for perfomed research. The following apparatuses were used: KSV Sigma 701 and KSV CAM 100 made in Finland, AMVn Anton Paar made in Austria, and T-02 four-ball apparatus made in Poland. Measurement of density, surface tension and wetting angle were done with the use of KSV Sigma 701 apparatus, according to its instruction manual. The static wetting angle on the real surface of a steel plate was determined with the use of KSV CAM 100 apparatus. The dynamic viscosity of the tested compounds was determined with the use of AMVn microviscometer. The tests of the lubricity properties of the synthetic oils and comparative liquids were perfomed with the use T-02 four-ball tester. The investigative results showed that PFPE oils can be used particularly in hydrodynamic and elastohydrodynamic lubrication.
Źródło:
Journal of KONES; 2011, 18, 1; 199-212
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability of air nucleus in liquid water and cavitation inception on marine engineering
Autorzy:
Fu, Q.
Chen, M.
Wang, X.
Zhu, R.
Zhang, G.
Powiązania:
https://bibliotekanauki.pl/articles/260137.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
air nuclei
water
molecular dynamics
stability
surface tension
Opis:
The micro air nucleus widely distributed in the ocean is a necessary condition for the cavitation of hydraulic machinery in seawater. In order to study the stability of air nucleus in seawater and cavitation inception, the computational domain of water molecules with air nucleus was studied using the method of molecular dynamics simulation, and the transient characteristics of air nucleus in liquid water were obtained. The key factors influencing nuclei stability were analyzed. The results showed that air nucleus with a certain mass could maintain the dynamic equilibrium in liquid water. The internal density of air nuclei had a critical value that allowed the nuclei to stably exist in water. The air nuclei mass was the decisive factor in its equilibrium volume in water, and the two were positively correlated. The internal density of air nuclei was negatively correlated with the nuclei radius when the nuclei was stable in water. Liquid surface tension was an important factor affecting the stability of the air nuclei. The larger the initial radius of nuclei, the smaller the water pressure, and the more likely the cavitation occurs.
Źródło:
Polish Maritime Research; 2018, S 3; 111-119
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ortho-positronium in liquid alkanes
Autorzy:
Zgardzińska, B.
Powiązania:
https://bibliotekanauki.pl/articles/146291.pdf
Data publikacji:
2010
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
positron annihilation
liquid alkanes
bubble model
surface tension
Opis:
Positron lifetime spectra were measured for a series of odd-numbered liquid n-alkanes (C7H16, C9H20, C13H28 and C19H40) in a broad range of temperature. According to the “bubble model” the ortho-positronium (o-Ps) lifetime is determined by surface tension. Bubble radius was calculated using the Tao-Eldrup model and compared to the radius expected from the surface tension of liquid. The radii are not identical, their difference rises with temperature. If one assumes the difference of radii as constant, the o-Ps lifetime calculated from the Tao-Eldrup model rises faster than the experimental one. The distinct rise of the difference of radii has no physical explanation in the accepted o-Ps annihilation model. This effect can be the result of radiation chemistry processes not taken into account so far in the bubble model.
Źródło:
Nukleonika; 2010, 55, 1; 41-46
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Semi-Automatic Apparatus for Measuring Wetting Properties at High Temperatures
Autorzy:
Bąkała, M.
Wojciechowski, R.
Sankowski, D.
Rylski, A.
Powiązania:
https://bibliotekanauki.pl/articles/220997.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
surface tension
wetting angle
wetting force
measurement system
Opis:
Determination of the physico-chemical interactions between liquid and solid substances is a key technological factor in many industrial processes in metallurgy, electronics or the aviation industry, where technological processes are based on soldering/brazing technologies. Understanding of the bonding process, reactions between materials and their dynamics enables to make research on new materials and joining technologies, as well as to optimise and compare the existing ones. The paper focuses on a wetting force measurement method and its practical implementation in a laboratory stand – an integrated platform for automatic wetting force measurement at high temperatures. As an example of using the laboratory stand, an analysis of Ag addition to Cu-based brazes, including measurement of the wetting force and the wetting angle, is presented.
Źródło:
Metrology and Measurement Systems; 2017, 24, 1; 175-184
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modyfikacja struktury kolagenu jako potencjalne źródło nowych związków o charakterze amfifilowym
Collagen structure modification as a source of new surface active amphiphilic agents
Autorzy:
Kezwoń, A.
Wojciechowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/2072965.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kolagen
napięcie powierzchniowe
reologia powierzchniowa
collagen
surface tension
surface rheology
Opis:
Celem badań prezentowanych w niniejszej pracy było określenie metodą analizy kształtu kropli aktywności powierzchniowej oraz właściwości reologicznych warstw adsorpcyjnych tworzonych przez kolagen typu I pozyskany ze skóry cielęcej. Uzyskane wyniki pozwalają stwierdzić, że kolagen natywny wykazuje małą zdolność obniżania napięcia powierzchniowego, ale poddanie go niewielkim modyfikacjom (działanie temperatury) skutkuje poprawą jego właściwości powierzchniowych.
The aim of research presented in this paper was to determine (using the method of droplet shape analysis) surface activity and rheological properties of adsorption layers formed by type I collagen derived from calf leather. The obtained results imply that native collagen shows rather weak surface properties. However, even simple modification of its structure (temperature treatment) results in improvement of its surface activity and mechanical properties of adsorbed layers.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 255--256
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wetting properties of the sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and polyoxyethylene (23) lauryl ether (Brij 35) binary mixtures in the poly(tetrafluoroethylene)-solution-air system
Autorzy:
Krawczyk, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/764089.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
surfactant
polymer
contact angle
critical surface tension of wetting
Opis:
Wettability of poly(tetrafluoroethylene) (PTFE) by aqueous solutions of binary mixtures composed of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) with polyoxyethylene (23) lauryl ether (Brij 35) was considered on the basis of the measured values of contact angle and surface tension. It was shown that the value of the critical surface tension of PTFE surface wetting at the studied system (23.5 mN/m), does not depend on the concentration and composition of the binary mixtures of studied surfactants in water, and it was higer than the surface tension of PTFE (20.2 mN/m). The best wettability of polytetrafluoroethylene (PTFE) by studied aqueous solutions of binary surfactants mixtures occurs at the mixtures concentration corresponding to the critical micelle concentration of their solutions.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2015, 70, 1
2083-358X
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On a differential inequality for a viscous compressible heat conducting capillary fluid bounded by a free surface
Autorzy:
Zadrzyńska, Ewa
Zajączkowski, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1310796.pdf
Data publikacji:
1996
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Tematy:
free boundary
compressible viscous heat conducting fluid
surface tension
Opis:
We derive a global differential inequality for solutions of a free boundary problem for a viscous compressible heat concluding capillary fluid. The inequality is essential in proving the global existence of solutions.
Źródło:
Annales Polonici Mathematici; 1996-1997, 65, 1; 23-53
0066-2216
Pojawia się w:
Annales Polonici Mathematici
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected the Casting Properties of the Composites AlMg10+Cgr
Autorzy:
Łągiewka, M.
Powiązania:
https://bibliotekanauki.pl/articles/355986.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloys
metal composites
graphite particles
castability
surface tension
Opis:
The paper is a review of the previous investigations concerning the influence of graphite particles both on the casting properties of metal matrix composites (MMCs). The work presents the examination results of casting properties (i.e. castability and shrinkage) of the MMCs with matrices of a selected aluminium alloy reinforced with graphite particles. There is also presented the influence of graphite particles on the surface tension and viscosity of the flowing and filling the mould composite suspension. The suspensions containing various percentages of graphite particles (namely 5%, 10%, or 15% in volume) were prepared in order to perform the above mentioned examinations. Castability (fluidity) of these suspensions was measured in two ways, i.e. by means of both the spiral test and the rod test, while their shrinkage was determined with the use of a device designed and assembled in the Department of Foundry Engineering, CUT. The device enables to determine changes in the length of a casting during its solidification with respect to the specified length of the test rod. The surface tension was determined by the wedge casting method consisting in the pouring of metal into an open shell mould with the cavity of wedge geometry, the sharp edge being perpendicular to the free metal surface. The change in viscosity corresponding to the change in graphite particles percentage was calculated from Einstein’s equation. The results of examinations show that the introduction of reinforcing graphite particles results in both a significant increase in the viscosity of the flowing suspension and a considerable decrease in its castability. The greater dimensional stability of castings was observed, i.e. the shrinkage of composite castings was smaller than the shrinkage of matrix alloy itself. An increase in surface tension index value with an increase in volume percentage of graphite particles in composite was also noticed.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1585-1589
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of components and parameters of some sulfide minerals surface tension with regards to stability of mineral-air bubble system
Autorzy:
Jańczuk, Bronisław
Zdziennicka, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1450639.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact angle
wettability
surface tension
detachment force
sulfide minerals
Opis:
The measurements of the advancing contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane on unoxidized and oxidized galena, pyrite, chalcopyrite, djurleite, bornite and covellite at the temperature equal 293 K were made. Additionally, the measurements of the force air bubble detachment from these sulfide minerals including also chalcocite in water were performed. Using the values of the obtained contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane the components and parameters of the unoxidized and oxidized sulfide minerals surface tension were calculated. For this calculation the van Oss et al. method was applied after analysis of the components and parameters of the surface tension of liquids used for contact angle measurements. Taking into account the contact angle of water on the sulfide minerals, the detachment force of air bubble from these minerals in water was determined using our equation and comparing to that of measured one. As follows from the measurements and calculations the wetting properties of sulfide minerals and the stability of mineral-air bubble depends to a larger extent on the degree of sulfide minerals oxidation than on the type of mineral.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 22-31
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Software for determination of surface tension with sessile drop method
Autorzy:
Lytvyn, M.
Powiązania:
https://bibliotekanauki.pl/articles/1940693.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska
Tematy:
sessile drop method
surface tension calculation
Young-Laplace equation
Opis:
The sessile drop method was implemented to calculate the values of the surface tension coefficient of liquid metals. Appropriate software was developed to increase the data processing efficiency and the accuracy of the obtained results. This paper provides information on the structure and applications of the designed programs as well as the underlying mathematical models used during computations. Since the determination of the surface tension coefficient in this study is based on the recognition of drop outlines from a digital image, the problems of calibration and appropriate photography mode adjustments are mentioned in this paper. In addition, the methods of controlling the research equipment using Arduino shields are described. Finally, the research results are presented in the form of graphs which show the temperature dependence of the studied parameters of metallic samples and compared with the literature data.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2017, 21, 1; 65-76
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The energetic - superficial and lubricity properties of petroleum products and ionic liquids
Autorzy:
Kałdoński, T. J.
Kałdoński, T.
Pakowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/244139.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
boundary layer
lubricity
ionic liquids
surface tension
contact angle
Opis:
This paper presents the results of comparative investigations on the lubricity and energetic superficial properties of selected petroleum products and new ionic liquids (ILs). Three base oils from polish petroleum refinery (PAO—6, SN-650, SN—350) and lubricity additive (Additin RC2515 EP) have been investigated comparatively to four ionic liquids with imidazolium organic cations and different inorganic anions, i. e. bis (trifluoromethylsulfonyl) imide and tetrafluoroborate. The lubricating ability properties petroleum products and ionic liquids have been assessed according to Polish Standard PN-76/C-04 1 47 (ASTMD2596-69 and ASTM D2270-77) on Four-Ball Testing machine. The investigation range of lubricity properties are limited to the assessment only two parameters i. e. P(t) - seizure load for increasing continuous loading and G(oz) - wear limiting load capacity. The superficial properties of oil compounds and ionic liquids have been assessed by means of modern KSV Sigma 701 Tensiometer. Surface tension o and wetting angle fi were assessed. The obtained results confirmed the possibilities of using tested ionic liquids as lubricants. The best lubricity properties, close to properties of Additin RC2515, had 1—methyl— 3—oktyloxymethylimidazolium tetrafluoroborate.
Źródło:
Journal of KONES; 2009, 16, 1; 239-244
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Zinc on the Surface Tension, Density and Molar Volume of (Ag-Sn)eut +Zn Liquid Alloys
Autorzy:
Gąsior, W.
Pstruś, J.
Moser, Z.
Powiązania:
https://bibliotekanauki.pl/articles/355603.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
influence of zinc
surface tension
density
molar volume alloys
Opis:
The dilatometric and maximum bubble pressure methods were applied for the measurements of the density and surface tension of liquid (Ag-Sn)eut +Zn lead-free solders. The experiments were carried out in the temperature range from 515 to 1223 K for the alloys of the zinc concentration equaling 0.01, 0.02, 0.04, 0.05, 0.1 and 0.2 of the mole fraction. It was found that the temperature dependence of both the density and the surface tension could be thought as linear, so they were interpreted by straight line equations. The experimental data of the molar volume of the investigated alloys were described by the polynomial dependent on the composition and temperature. Calculations of the surface tension by Butler’s equation were conducted and confronted with the experimental data. Some significant deviations between the experimental and the calculated surface tension were observed. They reached almost 40 mNm-1. The observed changes of the density and surface tension caused by the zinc addition to the Ag-Sn eutectic were discussed with the consideration of the thermodynamic properties and the influence of a small quantity of impurities in a protective gas atmosphere.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 361-368
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie właściwości fizykochemicznych dyspersji mikro- i nanopęcherzyków azotu w cieczach
Investigation of physicochemical properties of nitrogen micro- and nanobubbles dispersion in liquids
Autorzy:
Ulatowski, K.
Maciejewska, A.
Mróz, A.
Sobieszuk, P.
Powiązania:
https://bibliotekanauki.pl/articles/2073348.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
nanopęcherzyki
lepkość
napięcie powierzchniowe
zwilżalność
nanobubbles
viscosity
surface tension
wettability
Opis:
W pracy przeprowadzono generację nanopęcherzyków azotu w wodzie dejonizowanej za pomocą układów z membranami cylindrycznymi oraz przygotowano roztwory etanolu w wodzie i wodzie z nanodyspersją pęcherzyków. Zbadano wpływ obecności nanodyspersji na lepkość, napięcie powierzchniowe oraz kąty zwilżania szkła. Zbadano wpływ obecności nanodyspersji na lepkość, napięcie powierzchniowe oraz kąty zwilżania szkła. Stwierdzono, że w badanym zakresie stężeń etanolu obecność nanopęcherzyków nie wpływa na lepkość roztworu, podnosi jego napięcie powierzchniowe dla niskich stężeń etanolu (poniżej 20% mas.) oraz zwiększa kąty zwilżania na szkle w badanym zakresie stężeń.
In this work the generation of nanobubbles using the cylindric al-porous-membrane system was performed and mixtures of ethanol in pure water and water with nanobubbles were prepared. The influence of nanodispersion on viscosity, surface tension and contact angles on glass was investigated. The results show that in the investigated range of ethanol concentration a presence of nanobubbles has no influence on liquid viscosity, increases surface tension for low ethanol concentrations (below 20 mass %) and increases the contact angles on glass in the investigated range of concentrations.
Źródło:
Inżynieria i Aparatura Chemiczna; 2018, 3; 83--84
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A fundamental study of monovalent and divalent ions on froth properties in the presence of terpenic oil
Autorzy:
Li, Yubiao
Wang, Hongduo
Li, Wanqing
Song, Shaoxian
Powiązania:
https://bibliotekanauki.pl/articles/110301.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
surface tension
froth stability
dynamic foamability index
Gibbs adsorption isotherm
Opis:
In order to minimize fresh water usage, much attention has been paid to the flotation using saline or sea water. However, the effects of various ions in these waters on froth properties in flotation are not fully understood. In this study, the effects of electrolyte solutions containing NaCl, KCl, CaCl2, and MgCl2 at different concentrations in the presence of terpenic oil as a frother were investigated on froth performance, dynamic froth stability (DFS). It was found that KCl had the best synergistic effects with terpenic oil in reducing the solution surface tension. In the presence of terpenic oil, the DFS and half-life time were reduced with the increased ion concentration. Dynamics foamability index measurements (DFI) confirmed that the increased ion concentration increased the foamability, as frother did. In addition, Gibbs adsorption isotherm suggested that the amount of terpenic oil adsorbed at the gas-liquid interface was increased with the increased ion concentration. This study therefore indicated that the presence of ions can reduce the froth stability but not decline foamability due to terpenic oil, enlighting the application of saline or sea water in defoaming process in flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 3; 643-654
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Do combinations of insecticides and acaricides influence spray droplet formation and the interaction with citrus leaves?
Autorzy:
Della Vechia, J.F.
Santos, R.T.
Griesang, F.
Santos, C.M.
Ferriera, M.C.
Andrade, D.J.
Powiązania:
https://bibliotekanauki.pl/articles/2084816.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
contact angle
coverage efficiency
droplet size
surface tension
tank mixture
Opis:
In agriculture, the mixing of pesticides in tanks is a common practice. However, it is necessary to previse possible physical-chemical implications of this practice, which may affect the efficiency of the treatments performed. Therefore, the objective of this study was to evaluate the effects of the addition of acaricide to insecticidal spray mixtures on the formation of spray droplets and the interaction with citrus leaves. The experimental design was totally randomized, in a (2 × 3 + 1) factorial scheme for seven treatments. Factor A corresponded to the spray mixture used (isolate or in the mixture). Factor B corresponded to the insecticides tested (lambda-cyhalothrin + thiamethoxam, phosmet, and imidacloprid) and the control consisted of a spray mixture with spirodiclofen only. Nine replications were performed for characterization of the spray droplet size spectrum and four replications for the analysis of the surface tension and the contact angle. The mixture of pesticides showed positive results in terms of application safety. The addition of acaricide to insecticide spray mixtures reduced the surface tension and contact angle of droplets on the adaxial surface of orange leaves. There was an increment in volume median diameter (VMD), a significant reduction in the volume of droplets with drift-sensitive size and improvement in the uniformity of droplet size. Therefore, the addition of acaricide to an insecticide spray mixture positively influenced spray droplet formation and the interaction with citrus leaves providing better coverage and droplet size fractions with an appropriate size for safe and efficient application.
Źródło:
Journal of Plant Protection Research; 2019, 59, 4; 487-493
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ispolzovanie parametra poverhnostnogo natâženiâ dlâ ocenki processa raspylivaniâ topliva v dizelâh
Application of surface tension parameter for estimation of fuel atomization process in Diesel engines
Autorzy:
Krause, P.
Klyus, O.
Powiązania:
https://bibliotekanauki.pl/articles/360763.pdf
Data publikacji:
2013
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
diesel engine
fuel spray
surface tension
droplets distributiion
bio-components
Opis:
At Maritime University of Szczecin there are carried out research works concerning utilization of biofuels on fishing vessels. There are a lot of information about relations between atomization and fuel combustion. Initial works also indicates correlation of surface tension with atomization. This article presents results of experimental investigation of droplets distribution after determination of fuel oil surface tension. Relation between atomization quality and surface tension are analyzed. Distillate fuel oil, rapeseed oil and 10% rapeseed mixture with distillate fuel oil were used as a fuel.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2013, 36 (108) z. 2; 98-101
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation of copper-bearing shale at different pH values of solutions and sodium chloride concentrations
Autorzy:
Sajewicz, Jakub
Ratajczak, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/27323644.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
shale
salt flotation
zeta potential
surface tension
hydrodynamics
entrainment
thin films
Opis:
Flotation of copper-bearing shale in aqueous solutions of NaCl at their different pH values was investigated. The tests were carried out in a laboratory flotation machine. The pH range was between 5 and 10 while NaCl concentrations were 0.5M, 1.0M and 2.0M. It was observed that the flotation recovery of the copper shale was increasing with the increase of pH and concentration of the salt solution. On the basis of thermodynamic and hydrodynamic considerations it was postulated that the increasing surface tension was responsible for better shale flotation observed with increasing salt concentration. The observed improved shale flotation caused by increasing pH is most likely due to changes in the properties of the thin film between particle and bubble including mosaic structure of water on the surface of shale. It was shown that the zeta potential of shale particles, zeta potential of air bubbles, solution surface tension, and shale hydrophobicity were not responsible for the increasing with pH recoveries.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 176242
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niejednorodność krytycznego napięcia powierzchniowego zwilżania w zbiorze bardzo drobnych ziarn węglowych
Nonhomogeneity of critical surface tension of wetting in a set of very small coal particles
Autorzy:
Sablik, J.
Powiązania:
https://bibliotekanauki.pl/articles/318058.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
ziarna węglowe
napięcie powierzchniowe zwilżania
węgiel
critical surface tension
coal particles
Opis:
Przedstawiono wyniki badań niejednorodności krytycznego napięcia powierzchniowego zwilżania w zbiorach bardzo drobnych ziarn węgli kamiennych o różnym stopniu uwęglenia oraz tych samych węgli po zwilżeniu ich powierzchni różnego typu odczynnikami chemicznymi. Wykazano, że niejednorodność ta jest w danym zbiorze zależna od stopnia uwęglenia węgla kamiennego i maleje wraz ze wzrostem wartości tego parametru. Niejednorodność napięcia powierzchniowego zwilżania ziarn można zmienić przez pokrycie powierzchni odczynnikami. W przypadku badanych węgli kamiennych o najmniejszym stopniu uwęglenia uzyskać można pod wpływem odczynnika flotacyjnego tylko niewielkie zmniejszenie niejednorodności od wartości 12,5 mJ/m2 (powierzchnia czysta) do wartości 11,1 mJ/m2 (powierzchnia zwilżona odczynnikiem), zaś w przypadku węgli badanych o największym stopniu uwęglenia analogicznie od wartości 6,6 mJ/m2 do wartości 3,5 mJ/m2.W zbiorze ziarn o najmniejszym uwęgleniu zwilżonych odczynnikiem flotacyjnym różnica między energią powierzchni poszczególnych ziarn może wynosić do 22 mJ/m2 podczas gdy w zbiorze ziarn najwyżej uwęglonych badanych węgli tylko 7 mJ/m2. Analiza uzyskanych wyników dowodzi, że obok średniego krytycznego napięcia powierzchniowego zwilżania niejednorodność energetyczna powierzchni w zbiorze najdrobniejszych ziarn węglowych jest jednym z czynników decydujących o właściwościach technologicznych najdrobniejszych klas ziarnowych, a szczególnie o ich aktywności flotacyjnej.
Distribution of critical surface tension of wetting for very small coal particles of different coalification grade and the same coal particles after coating their surfaces with reagents of different types is presented. It was shown that the nonhomogeneity of coal particle surface tension depended on the coalification grade of coal and decreased with the increase of the coalification grade value. The energy nonhomogeneity of coal particle surfaces can be changed by coating their surfaces with chemical reagents. In the case of coal of low coalification grade only a small decrease of nonhomogeneity from 12.5 mJ/m2 (clean coal surface) to 11.1 mJ/m2 (surface coated with reagent) under the influence of flotation reagent has been achieved, whereas in the case of the high coalified coal a decrease from 6.6 mJ/m2 to 3.5 mJ/m2 has been found. For a set of coal particles of low coalification degree coated with a flotation reagent a difference of about 22 mJ/m2 between surface tension of particular particles can appear and for a set of the high coalified coals only of 7 mJ/m2 respectively. A discussion of the investigation results has shown that by the mean critical surface tension of wetting, surface nonhomogeneity for a set of very small coal particles is one of the most important factor determining the technological properties of the smallest size fractions of coal particles and, first of all, their flotation response.
Źródło:
Inżynieria Mineralna; 2000, R. 1, nr 1, 1; 17-22
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Components and parameters of synthetic chalcocite surface tension and its wettability by aqueous solution of n-octyl-β-D-glucopyranoside
Autorzy:
Jańczuk, B.
Zdziennicka, A.
Powiązania:
https://bibliotekanauki.pl/articles/110743.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact angle
wettability
surface tension
chalcocite
n-octyl-β-D-glucopyranoside
Opis:
The measurements of advancing contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane and aqueous solution of n-octyl-β-D-glucopyranoside (OGP) on unoxidized and oxidized synthetic chalcocite at the temperatures equal to 293, 303 and 313 K were made. Using the obtained contact angle values of the pure liquids the components and parameters of the unoxidized and oxidized synthetic chalcocite surface tension were calculated. For this calculation, different methods based on the Young equation were applied. It follows that the surface tension of both forms of chalcocite does not practically depend on the temperature in the range from 293 to 313 K. Taking into account the calculated values of components and parameters of unoxidized and oxidized chalcocite surface tension their wettability by the aqueous solution of n-octyl-β-D-glucopyranoside was considered. It appeared that wettability of the unoxidized chalcocite by aqueous solution of OGP can be predicted on the basis of the chalcocite surface tension components and parameters.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 19-30
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wpływu nanomateriałów węglowych na surfaktant płucny metodą pulsującej kropli
Influence of carbon nanomaterials on lung surfactant studied by the oscillating drop method
Autorzy:
Dymowski, K.
Mazurkiewicz-Pawlicka, M.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2073185.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dynamiczne napięcie powierzchniowe
reologia powierzchni
inhalacja
nanocząstki
dynamic surface tension
surface rheology
inhalation
nanoparticles
Opis:
Przeanalizowano wpływ dwóch typów wielościennych nanorurek węglowych oraz nanopłatków tlenku grafenu na dynamiczne właściwości powierzchniowo czynne surfaktantu płucnego (Curosurf) oraz opisujące je dylatacyjne właściwości reologiczne powierzchni ciecz-gaz. Na podstawie badań wykonanych metodą pulsującej kropli oceniono i porównano wpływ analizowanych nanomateriałów na sprężystość i lepkość powierzchniową surfaktantu płucnego oraz środka powierzchniowo czynnego z nanocząsteczkami(stężenie 0,25-1 mg/ml. Uzyskane dane potwierdziły, że nanomateriały węglowe wpływają na dynamikę zmian napięcia powierzchniowego w tym układzie, a obserwowane efekty zależą od zarówno powinowactwa nanomateriałów do wody (hydrofilowość/hydrofobowość), jak i innych właściwości fizycznych. Uzyskane wyniki wskazują, że inhalacja nanocząstek węglowych nie jest obojętna dla zdrowia, gdyż może wpływać na dynamikę zmian napięcia powierzchniowego, a zatem i na przebieg procesów transportu masy w układzie surfaktantu płucnego.
The influence of two types of multiwall carbon nanotubes and graphene oxide flakes on the dynamic surface tension and surface rheological properties of the model lung surfactant (Curosurf) was investigated. Based on the results of pulsating drop tensiometry, the viscoelastic dilatational properties of the gas-liquid interface were evaluated and the samples of pure lung surfactant and surfactant with nanoparticles (concentration 0.25-1 mg/ml) were compared. The obtained data confirmed that carbonaceous nanomaterials influence the mode of surface tension variations in this system, and the observed effects depend on both nanomaterial affinity to water (hydrophilicity/hydrophobicity) and other physical properties. The results of this study suggest that inhalation of carbonaceous nanoparticles may be not neutral for health since the nanodeposits influence the dynamic surface tension of lung surfactant and associated mass transfer processes in the lungs.
Źródło:
Inżynieria i Aparatura Chemiczna; 2017, 3; 68--69
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of maximum bubble pressure tensiometry in the studies of pulmonary surfactant activity
Zastosowanie tensjometrii MBP (Maximum Bubble Pressure) w badaniach aktywności surfaktantu płucnego
Autorzy:
Kramek-Romanowska, K.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2072846.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dynamic surface tension
aerosol
respiratory system
dynamiczne napięcie powierzchniowe
aerozol
układ oddechowy
Opis:
The paper demonstrates the application of maximum bubble pressure tensiometry for analysis of physicochemical effects induced by selected mineral nanoparticles and medical powders on pulmonary surfactant. It was shown that dynamic surface tension data measured in timescales relevant to breathing conditions can be used as indicators of possible alterations in lung mechanics caused by inhaled aerosol particles.
W pracy przedstawiono wyniki zastosowania tensjometrii pęcherzykowej opartej o pomiar ciśnienia maksymalnego do analizy wpływu wybranych nanocząstek mineralnych i leczniczych proszków inhalacyjnych na surfaktant płucny. Dane pomiarowe dynamicznego napięcia powierzchniowego w skalach czasowych korelujących z rytmem oddychania wskazują na możliwość uzyskania informacji o zaburzeniach mechaniki płuc wskutek wdychania cząstek aerozolowych zawartych w powietrzu.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 263--264
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania adsorpcji i zwilżania porowatego materiału przez roztwory surfaktantów
Wetting and adsorption of surfactant solution on porous solid
Autorzy:
Radwan, K.
Rakowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/373203.pdf
Data publikacji:
2011
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
adsorpcja
napięcie powierzchniowe
związek powierzchniowo czynny
zwilżanie
adsorption
surface tension
surfactant
wetting
Opis:
Adsorpcja surfaktantu na granicy faz ciało stałe-ciecz odgrywa ważna role w wielu technologicznych i przemysłowych zastosowaniach, takich jak mycie, flotacja mineralna, zapobieganie korozji, rozdrabniania ciał stałych, wydobycia ropy naftowej i innych. Artykuł stanowi przegląd aktualnych badan adsorpcji surfaktantów na granicy faz ciało stałe/roztwór wodny. Autorzy przedstawiają badania adsorpcji i zwilżenia roztworów środków powierzchniowo czynnych na porowatym adsorbencie. Dodatkowo wyznaczono równowagowe napięcia powierzchniowe na podstawie, których wykreślono izotermy napięcia powierzchniowego. Na podstawie otrzymanych wyników obliczono krytyczne stężenie micelarne (CMC). Badania przeprowadzono stosując niejonowe i anionowe środki powierzchniowo czynne, takie jak Sulfobursztynian N5 (wodny roztwór soli sodowej monoestru kwasu sulfobursztynowego oksyetylenowanego alkilofenolu), ABS Na (alkilobenzenosulfonian sodu) i Sulforokanol 327 (sól sodowa siarczanowanego oksyetylenowanego (3) alkoholu C12-15).
The adsorption of surfactant on the solid-liquid interface play an important role in many technological and industrial applications such as detergency, mineral flotation, corrosion inhibition, dispersion of solids, oil recovery and more. This article is a review contemporary study of surfactant adsorption on the solid/aqueous interface. Authors present research of the adsorption and wetting of surfactant solutions on the porous adsorbent. Additionally equilibrium surface tension was measured and surface tension isotherms were plotted. Based on the results critical micelle concentration (CMC) was calculated. Studies were conducted using nonionic and anionic surfactants, such as Sulfobursztynian N-5 (Disodium Nonoxynol-5 Sulfosuccinate), ABS-Na (Sodium Dodecylbenzenesulfonate) and Sulforokanol L-327 (Sodium C12-15 Pareth-3 Sulfate).
Źródło:
Bezpieczeństwo i Technika Pożarnicza; 2011, 1; 89-94
1895-8443
Pojawia się w:
Bezpieczeństwo i Technika Pożarnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wetting hysteresis test of solids by different types of surfactants
Badanie histerezy zwilżania materiałów stałych surfaktantami różnych typów
Autorzy:
Sala, D.
Mizerski, A.
Powiązania:
https://bibliotekanauki.pl/articles/137034.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
wetting
hysteresis
surface tension
contact angle
zwilżanie
histereza
napięcie powierzchniowe
kąt graniczny
Opis:
The results of the studies of the wetting hysteresis of solids by surfactant solutions were presented. Using the K100MK2 tensiometer surface tension isotherms of tested surfactants were specified . On their basis the critical micelle concentration (CMC) of each surfactant was determined. Wetting properties were tested at concentrations of 0.5 CMC, 1 CMC, 2 CMC. The following five solid materials were used for the measurements: polyethylene, poly(methyl methacrylate), polytetrafluoroethylene, copper and glass. Differences among the wetting properties of surfactants on tested solid materials were discussed and the results were compared with the literature data.
W artykule przedstawiono wyniki badań histerezy zwilżania materiałów stałych roztworami surfaktantów różnych typów. Za pomocą tensjometru K100 MK2 wyznaczono izotermy napięcia powierzchniowego badanych surfaktantów i na podstawie ich przebiegu określono wartości krytycznego stężenia micelizacji (CMC) każdego surfaktantu. Zdolności zwilżające badano przy stężeniach roztworów równych 0.5, 1 i 2 CMC. Do pomiarów wykorzystano 5 materiałów stałych: polietylen, polimetakrylan metylu, teflon, miedź i szkło. Omówiono różnice zdolności zwilżających użytych surfaktantów w stosunku do badanych materiałów stałych i porównano otrzymane wyniki z danymi literaturowymi.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2013, 4, 48; 7-21
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface tension technique as a strategy to evaluate the adsorption of biosurfactants used in soil remediation
Autorzy:
Gusiatin, Z. M.
Powiązania:
https://bibliotekanauki.pl/articles/363290.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
adsorption
CMC
rhamnolipids
saponin
soil
surface tension
adsorpcja
gleba
saponina
napięcie powierzchniowe
Opis:
This study investigated the adsorption of two biosurfactants, non ionic saponin and anionic Reco 10 (a mixture of rhamnolipids). The experiments were performed with three different soils (sandy clay loam, clay loam, clay) and at two soil/biosurfactant ratios, m/V=1/10 and 1/40. Using a tensiometer, surface tension in aqueous biosurfactant solutions and their supernatants was measured and the critical micelle concentration (CMC) was determined. The amount of adsorbed biosurfactants was calculated based on the CMC values. Adsorption of both biosurfactants depended on soil type and m/V ratio. The highest saponin and Reco 10 adsorption was in the soil with the greatest content of clay and organic matter, the highest cation exchange capacity and a m/V of 1/40. Thus, clay soils may need a higher concentration of biosurfactants than sandy or loamy soils for effective pollutant removal.
Źródło:
Environmental Biotechnology; 2015, 11, 2; 27-33
1734-4964
Pojawia się w:
Environmental Biotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mikrotensjometryczna analiza zmian aktywności powierzchniowej surfaktantu niejonowego w obecności nanostrukturalnych cząstek mineralnych
Microtensiometric analysis of changes in surface activity of nonionic surfactant induced by nanostructured mineral particles
Autorzy:
Lenard, M.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2073091.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
napięcie powierzchniowe
adsorpcja
cząstki nanostrukturalne
inhalacja
surface tension
adsorption
nanostructured particles
inhalation
Opis:
W pracy przebadano zastosowanie mikrotensjometrii igłowej do śledzenia zmian napięcia powierzchniowego na powierzchni 0,1 mM wodnego roztworu Tritonu X-100 po zanieczyszczeniu go kilkoma rodzajami cząstek nanoglinek. Wykazano, że obecność cząstek obniża adsorpcję surfaktantu na powierzchni ciecz/gaz, zaś efekt zależy od rodzaju cząstek i ich stężenia. Opisane badania o charakterze modelowym stanowią punkt wyjścia do zastosowania opisanej metody do badania oddziaływania nanostrukturalnych cząstek pyłów na surfaktant płucny, co będzie stanowiło cenne uzupełnienie innych technik używanych w pomiarach tego typu.
The use of needle microtensiometer to trace the changes of surface tension at the surface of 0.1 mM Triton X-100 aq. solution contaminated with different types of nanostructured aluminosillicates is discussed in the paper. It is demonstrated that studied particles induce the reduction of surfactant adsorption at air/liquid interface in material- and concentration-dependent manner. This basic research opens the possibility of application of microtensiometer to future studies of interactions between different nanostructured dust particles and lung surfactant as valuable extension of other methods currently used for that purpose.
Źródło:
Inżynieria i Aparatura Chemiczna; 2015, 6; 334--335
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface tension reduction in air-water systems containing nonionic surfactant - comparison of mass transfer limited models
Redukcja napięcia powierzchniowego w układzie woda-powietrze zawierającym niejonowy surfaktant - porównanie modeli z limitem transportu masy
Autorzy:
Kramek-Romanowska, K.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2073277.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adsorption dynamics
surface tension
diffusion
convection
dynamika adsorpcji
napięcie powierzchniowe
dyfuzja
konwekcja
Opis:
In this work, a proposal of non-diffusional description of surface tension reduction in dynamic conditions in systems containing nonionic surfactant Tween80 is presented. The proposed macroscopic model exploits the conception of mass transfer coefficient in liquid phase. In addition, changes in interfacial surface (surface of a growing bubble in the Maximum Bubble Pressure method) are taken into account in the model. Obtained results were compared with the asymptotic solution of Ward and Tordai equation and experimental results.
Przedstawiono propozycję opisu dynamiki obniżania napięcia powierzchniowego układu roztwór niejonowego surfaktantu TweenSOpowietrze. Zaproponowany model wykorzystuje ujęcie makroskopowe procesu z zastosowaniem koncepcji współczynnika wnikania masy w fazie ciekłej. W obliczeniach uwzględniono zmienność pola powierzchni pęcherza na której gromadzi się surfaktant oraz efekty konwekcyjne. Wyniki porównano z asymptotycznym rozwiązaniem Ward-Tordai dyfuzyjnego modelu transportu surfaktantu do powierzchni międzyfazowej oraz wynikami eksperymentalnymi.
Źródło:
Inżynieria i Aparatura Chemiczna; 2017, 3; 78--79
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marangoni convection in a relatively hotter or cooler liquid layer with free boundaries
Autorzy:
Gupta, A. K.
Shandil, R. G.
Powiązania:
https://bibliotekanauki.pl/articles/265233.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
napięcie powierzchniowe
konwekcja
przewodzenie
stabilność liniowa
surface tension
convection
conducting
linear stability
Opis:
In this paper, we study the onset of cellular convection in a horizontal fluid layer heated from below, with a free-slip boundary condition at the bottom when the driving mechanism is surface tension at the upper free surface, in the light of the modified analysis of Banerjee et al. (Jour. Math. & Phys. Sci., 1983, 17, 603). This leads to a formulation of the problem which depends upon whether the liquid layer is relatively hotter or cooler. It is found that the phenomenon of surface tension driven instability problems should not only depend upon the Marangoni number which is proportional to the maintained temperature differences across the layer but also upon another parameter that arises due to variation in the specific heat at constant volume on account of the variations in temperature. Numerical results are obtained for the problem wherein the lower free boundary is perfectly thermally conducting.
Źródło:
International Journal of Applied Mechanics and Engineering; 2013, 18, 2; 581-588
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of hexane and cyclohexane vapours at the water drop surface
Autorzy:
Miller, R.
Aksenenko, E. V.
Kovalchuk, V. I.
Tarasevich, Y. I.
Fainerman, V. B.
Powiązania:
https://bibliotekanauki.pl/articles/110244.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
water-heptane vapour interface
drop profile analysis tensiometry
dynamic surface tension
adsorption kinetics
Opis:
The dependence of the dynamic surface tension of water at the interface with saturated hexane and cyclohexane vapours was measured by the drop profile analysis method. The surface tension for the adsorption layers of cyclohexane at different temperatures was compared with the results reported earlier for the adsorption of hexane and other alkanes from the vapour phase on water drops. It is shown that cyclohexane is adsorbed significantly slower than the adsorption of hexane occurs, and is characterised by a much larger induction time. The error in the drop radius measurements at 40 ºC attains 45 m. The experimental rheologic characteristics of the adsorbed layers are studied and the results are compared with the model developed to describe an adsorption process governed by a kinetic mechanism.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 54-62
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrospinning of polymeric fibres: an unconventional view on the influence of surface tension on fibre diameter
Elektroprzędzenie włókien polimerowych – niekonwencjonalny pogląd na wpływ naprężenia powierzchniowego na średnice włókien
Autorzy:
Araújo, E. S.
Nascimento, M. L. F.
de Oliveira, H. P.
Powiązania:
https://bibliotekanauki.pl/articles/232610.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
electrospinning
polymeric fibres
Taylor-cone
surfactant
surface tension
elektroprzędzenie
włókna polimerowe
napięcie powierzchniowe
Opis:
The production of regular and bead-free electrospun polymeric fibres requires an adequate combination of different parameters applied in the experimental setup viz. voltage for electrodeposition, viscosity of the solution, density of the polymeric support, the distance between electrodes and the geometry of the spinneret. Determination of the physical balance of forces on the droplet during fibre production was explored and provides relevant theoretical information about the surface tension and radius of polymeric fibres. Based on these predictions, we prepared polymeric electropun fibres of poly (vinyl alcohol), poly (vinyl pyrrolidone) and Eudragit® L100 in order to analyse non-conventional physical properties of experimental systems such as droplet stiffness and their influence on the diameter of resulting fibres.
Produkcja za pomocą elektroprzędzenia regularnych włókien polimerowych, wolnych od zgrubień wymaga dobrania odpowiedniej kombinacji różnych parametrów stanowiska przędącego takich jak np. napięcie między elektrodami, lepkość roztworu przędzalniczego, gęstość, odległość pomiędzy elektrodami i geometria układu przędącego. Badano fizycznie określony balans sił działający na wypychaną kroplę roztworu podczas tworzenia włókna. Badania eksperymentalne dostarczyły odpowiednich teoretycznych informacji o naprężeniu powierzchniowym i średnicy tworzonych włókien polimerowych. W oparciu o uzyskane informacje przygotowano elektroprzędzenie włókien z alkoholu poliwinylowego, alkoholu poliwinylopirolidowego i preparatu Eudragit® L100. Następnie na podstawie wcześniejszych rozważań i uzyskanych wyników eksperymentalnych przeprowadzono analizę wpływu poszczególnych czynników na średnicę otrzymywanych włókien.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 1 (115); 22-29
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On local motion of a compressible barotropic viscous fluid bounded by a free surface
Autorzy:
Zajączkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/1361117.pdf
Data publikacji:
1992
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Tematy:
free boundary
compressible barotropic viscous fluid
local existence
anisotropic Sobolev spaces
surface tension
Opis:
We consider the motion of a viscous compressible barotropic fluid in ℝ³ bounded by a free surface which is under constant exterior pressure, both with surface tension and without it. In the first case we prove local existence of solutions in anisotropic Hilbert spaces with noninteger derivatives. In the case without surface tension the anisotropic Sobolev spaces with integration exponent p > 3 are used to omit the coefficients which are increasing functions of 1/T, where T is the existence time.
Źródło:
Banach Center Publications; 1992, 27, 2; 511-553
0137-6934
Pojawia się w:
Banach Center Publications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Ultrasonic Methods for Evaluation of High-Pressure Physicochemical Parameters of Liquids
Autorzy:
Kiełczyński, Piotr
Ptasznik, Stanisław
Szalewski, Marek
Balcerzak, Andrzej
Wieja, Krzysztof
Rostocki, Aleksander J.
Powiązania:
https://bibliotekanauki.pl/articles/176703.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ultrasonic methods
speed of sound
acoustic impedance
surface tension
thermal conductivity
physicochemical properties
Opis:
An emerging ultrasonic technology aims to control high-pressure industrial processes that use liquids at pressures up to 800 MPa. To control these processes it is necessary to know precisely physicochemical properties of the processed liquid (e.g., Camelina sativa oil) in the high-pressure range. In recent years, Camelina sativa oil gained a significant interest in food and biofuel industries. Unfortunately, only a very few data characterizing the high-pressure behavior of Camelina sativa oil is available. The aim of this paper is to investigate high pressure physicochemical properties of liquids on the example of Camelina sativa oil, using efficient ultrasonic techniques, i.e., speed of sound measurements supported by paralel measurements of density. It is worth noting that conventional low-pressure methods of measuring physicochemical properties of liquids fail at high pressures. The time of flight (TOF) between the two selected ultrasonic impulses was evaluated with a cross-correlation method. TOF measurements enabled for determination of the speed of sound with very high precision (of the order of picoseconds). Ultrasonic velocity and density measurements were performed for pressures 0.1-660 MPa, and temperatures 3-30°C. Isotherms of acoustic impedance Za, surface tension σ and thermal conductivity k were subsequently evaluated. These physicochemical parameters of Camelina sativa oil are mainly influenced by changes in the pressure p, i.e., they increase about two times when the pressure increases from atmospheric pressure (0.1 MPa) to 660 MPa at 30°C. The results obtained in this study are novel and can be applied in food, and chemical industries.
Źródło:
Archives of Acoustics; 2019, 44, 2; 329-337
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermoelastic surface properties of seawater in coastal areas of the Baltic Sea
Autorzy:
Boniewicz-Szmyt, K.
Pogorzelski, S.J.
Powiązania:
https://bibliotekanauki.pl/articles/48574.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
thermoelastic surface property
viscoelasticity
surface tension
sea water
Baltic Sea
coastal area
crude oil
physicochemical property
Źródło:
Oceanologia; 2016, 58, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Wetting on The Course of The Drum Granulation
Autorzy:
Błaszczyk, M.
Heim, A.
Olejnik, P.
Powiązania:
https://bibliotekanauki.pl/articles/185141.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
drum granulation
surface tension
particle size distribution
granulacja bębnowa
napięcie powierzchniowe
rozkład wielkości cząstek
Opis:
This paper presents the results of experimental drum granulation of silica flour with the use of wetting liquids with different values of surface tension. Additionally, different liquid jet breakup and different residual moisture of the bed were applied in the tests. The process was conducted periodically in two stages: wetting and proper granulation, during which no liquid was supplied to the bed. The condition of the granulated material after the period of wetting (particle size distribution and moisture of separate fractions) and a change in the particle size distribution during the further conduct of the process (granulation kinetics) were determined.
Źródło:
Chemical and Process Engineering; 2017, 38, 2; 331-342
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the surface tension for binary ionic solutions by means of Butler model
Obliczanie napięcia powierzchniowego dwuskładnikowych roztworów jonowych na podstawie modelu Butlera
Autorzy:
Iwanciw, J.
Kalicka, Z.
Kawecka-Cebula, E.
Pytel, K.
Powiązania:
https://bibliotekanauki.pl/articles/263920.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
napięcie powierzchniowe
model Butlera
dwuskładnikowe roztwory tlenkowe
surface tension
Butler model
binary oxide solutions
Opis:
It was attempted in this work to study the applicability of Butler approach to the metal oxide solutions. First of all, the authors tried to determine the impact of the thermodynamic activity coefficients of the components of the bulk phase on the surface tension. The activity coefficients series expansions reported by Ban-ya and one of the authors of this work were used. The model equations were solved by means of a Newton regression method, which allowed to calculate the components contents in the surface phase. Those contents were subsequently substituted into the modified Butler master equation, which gave desired final surface tensions estimates for the considered oxide binaries. The computations were done for liquid MnO-SiO2 system (at 1843 K and 1990 K) and subsequently for MnO-AI2O3 (at 2058 K) and MnO-CaO (at 2473 K) systems. For MnO-SiO2 system at 1843 K, the obtained results could be compared to the experimental ones and a fairly good agreement was found. For MnO-Al2O3 and MnO-CaO systems, unfortunately, there is no experimentally measured surface tension data, therefore it was not possible to make any comparison. Nevertheless, the model may be quite useful for the surface tension estimates for the systems, which have not been yet investigated and such model calculations like presented in this work may provide acceptable predictions.
W pracy podjęto próbę zastosowania modelu Butlera do roztworów tlenków metali. Głównym celem było zbadanie wpływu wartości aktywności termodynamicznej składników roztworu na napięcie powierzchniowe. Do obliczeń przyjęto rozwinięcia na współczynniki aktywności zaproponowane przez Ban-ya oraz niezależnie przez jednego z autorów niniejszej pracy. Równania modelu Butlera rozwiązano metodą regresji Newtona, w celu otrzymania stężeń składników w fazie powierzchniowej. Po wprowadzeniu tych stężeń do równań Butlera uzyskano ostatecznie wartości napięcia powierzchniowego dla rozważanych binarnych układów tlenkowych. Obliczenia przeprowadzono dla ciekłych układów MnO-SiO2 (w temperaturach 1843 K i 1990 K) oraz MnO-Al2O3 (2058 K) i MnO-CaO (2473 K). W przypadku układu MnO-SiO2 w 1843 K wyniki obliczeń porównano z wynikami eksperymentalnymi, uzyskując dość dobrą zgodność. Niestety w przypadku MnO-Al2O3 oraz MnO-CaO takie porównanie było niemożliwe z powodu braku danych eksperymentalnych. Jednak wydaje się, że model może być użyteczny do oceniania napięcia powierzchniowego układów nie zbadanych pod tym kątem eksperymentalnie, dostarczając prognoz możliwych do zaakceptowania.
Źródło:
Metallurgy and Foundry Engineering; 2005, 31, 1; 75-86
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ własności fizykochemicznych leków na ich atomizację w inhalatorze pneumatycznym
Influence of physicochemical properties of nebulized drugs on their atomization in a jet inhaler
Autorzy:
Bąk, J.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2070934.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
atomizacja pneumatyczna
aerozol
terapia inhalacyjna
napięcie powierzchniowe
pneumatic atomization
aerosol
inhalation therapy
surface tension
Opis:
Celem pracy było określenie wpływu napięcia powierzchniowego i ciśnienia rozpraszającego na rozkład wielkości emitowanych kropel oraz masową wydajność atomizacji mieszanin leków w inhalatorze pneumatycznym. Stwierdzono, że wzrost ciśnienia powietrza zasilającego i obniżenie napięcia powierzchniowego powodują wzrost wydajności procesu oraz emisję drobniejszego aerozolu. Wykazano, że mieszanie leków w celu ich podawania w jednej inhalacji powoduje zmianę wydajności oraz rozkładu wielkości kropel.
The aim of research was to assess the impact of air pressure and surface tension on the mass output and droplet size of aerosols emitted from pneumatic inhalers filled with drug mixtures. It was proved that an increase of atomization pressure and reduction of surface tension resulted in the higher aerosol mass output and smaller droplets. It was shown that mixing of drugs in order to deliver them in a single inhalation leads to alter the atomization efficiency and droplet size distribution.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 2; 21-22
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie właściwości szkliw pod kątem zastosowań w grubowarstwowych mikrorezystorach fotoformowalnych
Investigation of glasses for application in thick-film photoimageable microresistors
Autorzy:
Kiełbasiński, K.
Zwierkowska, E.
Achmatowicz, S.
Młożniak, A.
Jakubowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/192210.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
napięcie powierzchniowe szkliwa
grubowarstwowe mikrorezystory fotoformowalne
thick film photoimageable microresistors resitors
glass surface tension
Opis:
W artykule wyjaśniono wpływ lepkości i napięcia powierzchniowego szkliwa w temperaturze wypalania na kształt ścieżek o szerokości kilku dziesiątek mikrometrów otrzymanych za pomocą nowoczesnych metod takich jak fotoformowanie. Opracowanie w głównej mierze dotyczy mikrorezystorów z powodu znacznej zawartości w nich szkliwa. Opisano problemy występujące w fotoformowalnych pastach światłoczułych, związane z ich nadmiernym rozpływem i wyciekiem szkliwa. Zaproponowano rozwiązanie tych problemów przez zastosowanie szkliw o wysokim napięciu powierzchniowym co pociąga za sobą dużą wartość kąta zwilżania podłoża. Przedstawiono metodę pomiaru kąta zwilżania, którą zastosowano do oceny kilku szkliw opracowanych w ITME. Następnie obliczono teoretyczną szerokość mikrorezystorów po wypaleniu. Stwierdzono, że szkliwa bezołowiowe zastosowane do mikrorezystorów są znacznie mniej podatne na rozpływ podczas wypalania niż szkliwa zawierające tlenek ołowiu, zatem są preferowane do mikrorezystorów.
This paper examines the theoretical influence of certain properties of glass exhibited at a firing temperature, like viscosity and surface tension, on the shape of a few tens of microns wide lines, which can be obtained in a state-of-the-art thick film fabrication process i.e. photoimaging. Resistive lines are the main focus of attention because of their high glass content. The major disadvantages of experimental microresistors, like glass bleeding and excessive reflow, are discussed. Solutions to these problems, including glass with a high surface tension and, in consequence, a high wetting angle, are proposed. An experimental method of measuring the wetting angle, which was used to assess the quality of various glasses analyzed at ITME, is shown. The results have proved that lead-free glasses are less affected by excessive reflow than their lead oxide containing counterparts, and therefore are more suitable for microresistors.
Źródło:
Materiały Elektroniczne; 2013, T. 41, nr 1, 1; 10-16
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda badania wpływu nanocząstek na dynamiczne napięcie npowierzchniowe modelowego surfaktantu płucnego w układzie pulsującego pęcherzyka
Autorzy:
Kondej, D.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/137710.pdf
Data publikacji:
2012
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
nanocząstki
surfaktant płucny
napięcie powierzchniowe
pulsujący pęcherzyk
nanoparticles
pulmonary surfactant
surface tension
pulsating bubble
Opis:
Metodę stosuje się do badania wpływu cząstek nanoproszków występujących na stanowiskach pracy na napięcie powierzchniowe modelowego surfaktantu płucnego. Badania polegają na wyznaczeniu zmian napięcia powierzchniowego podczas oscylacji pęcherzyka powietrznego wytworzonego w roztworze modelowego surfaktantu płucnego. Ocenę wpływu nanocząstek na aktywność powierzchniową surfaktantu płucnego przeprowadza się na podstawie analizy kryteriów ilościowych opisujących pętle histerezy napięcia powierzchniowego w funkcji zredukowanej powierzchni międzyfazowej.
This method is used to study the influence of particles of nanopowders on the surface tension of a model pulmonary surfactant. The study consists in determining the changes in surface tension during the oscillation of the air bubble formed in the solution of the model pulmonary surfactant. The assessment of the impact of nanoparticles on the surface activity of the pulmonary surfactant is carried out on the basis of quantitative criteria describing the hysteresis loops of surface tension as a function of the reduced interfacial area.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2012, 1 (71); 5-11
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Osobliwości styku nanoobiektów z powierzchnią ciała stałego
The interaction particularities of nanoobjects on a solid state surface
Autorzy:
Marczak, M.
Hourlier, D.
Powiązania:
https://bibliotekanauki.pl/articles/190432.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
nanotribologia
adsorpcja
adhezja
warstwa graniczna
napięcie powierzchniowe
nanotribology
adsorption
adhesion
boundary layer
surface tension
Opis:
W artykule przedstawiono fizyczne efekty występujące podczas "manipulowania" nanoobiektami na powierzchni ciała stałego. Wyjaśniono istotę pozostawiania śladu przez nanodrut krzemowy, który występuje w miejscu jego pobytu przed przesunięciem nd po powierzchni krzemu oraz niektóre inne osobliwości występujące w obszarze styku: nanodrutpowierzchnia ciała stałego–ciecz w kapilarze.
In this article, physical aspects present during manipulation of nanoparticles deposited on a solid state surface are presented. Origins of traces left on the surface of the contact (nanowire – solid state surface – capillary liquid.) after nanowire manipulation are explained and additional particularities are discussed.
Źródło:
Tribologia; 2009, 3; 139-152
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic bubble tensiometry as a useful tool for assessment of physicochemical interactions of liposomal drug carriers with respiratory tract
Autorzy:
Kramek-Romanowska, K.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/115811.pdf
Data publikacji:
2015
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
pulmonary surfactant
liposomes
inhalation
surface tension
adsorption
surfaktant płucny
liposomy
inhalacja
napięcie powierzchniowe
adsorpcja
Opis:
This article presents an experimental investigation of physicochemical interactions of novel liposomal drug carriers intended for inhalation with model lung surfactant system. The research was done with the use of maximum bubble pressure (MBP) method to measure changes of dynamic surface tension of pulmonary surfactant system after contact with liposomal colloids made of lecithin and lecithin/cholesterol (3:1 w/w) before and after 5 and 10 minutes of nebulisation by pneumatic nebulizer. What is important to point, MBP method allows the discussion of measured phenomena with reference to the time scales characteristic for the changes of alveolar surface area during the breathing cycle. Obtained results may have a potential application during design and development of new therapeutic liposomal formulations for treatment of respiratory as well as systemic diseases.
Źródło:
Challenges of Modern Technology; 2015, 6, 4; 23-26
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wybranych dodatków typu CHO na wartość napięcia powierzchniowego bazowego oleju napędowego CON
Influence of selected CHO-type additives on a high boiling diesel fuel component (CON) surface tension
Autorzy:
Kajdas, Cz.
Wiśniewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/258047.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
dodatki CHO
olej napędowy
napięcie powierzchniowe
surface tension
diesel fuel
CON
CHO-type additives
Opis:
W pracy przedstawiono wyniki badań napięcia powierzchniowego bazowego oleju napędowego CON (Ciężki Olej Napędowy) oraz kompozycji wytworzonych na bazie tego oleju w funkcji stężenia (100-800 ppm) dodatków typu CHO: monolaurynianu sorbitanu (MLS) i benzoesanu cholesterylu (CH_Benz). Zmianę napięcia powierzchniowego oznaczano metodą pierścieniową za pomocą Tensjometru K100 firmy Krüss. W wyniku przeprowadzonych badań stwierdzono nieznane dotąd zjawisko w odniesieniu do CON, polegające na występowaniu minimum napięcia powierzchniowego przy zawartości dodatków w zakresie 400-550 ppm.
This paper presents research results concerning the influence of two CHO type additives - sorbitan monolaurate (MLS) and cholesteryl benzoate (CH_Benz) - the high boiling diesel fuel component surface tension change. The additive concentration range used was from 100 ppm to 800 ppm. Surface tension change was measured using Krüss K100 apparatus. A new specific relationship of the fuel surface tension versus the additive concentration was discovered. In both cases on the curves a clear minimum appeared. For sorbitan monolaurate the found minimum is at the 510 ppm additive concentration and for cholesteryl benzoate at 520 ppm additive concentration.
Źródło:
Problemy Eksploatacji; 2006, 1; 249-255
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ pyłów emitowanych przy obróbce metali na aktywność powierzchniową surfaktantu płucnego
Influence of dust emitted during metal machining on pulmonary surfactant surface activity
Autorzy:
Kondej, D.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2070782.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pyły metali
toksyczność
surfaktant płucny
napięcie powierzchniowe
metallic dusts
toxicity
pulmonary surfactant
surface tension
Opis:
Badano dynamiczne napięcie powierzchniowe modelowego surfaktan-tu płucnego metodą pulsującego pęcherzyka. Surfaktant po kontakcie z pyłami pobranymi na stanowiskach pracy (obróbka metali) wykazywał obniżoną aktywność powierzchniową, czego przejawem było zmniejszenie pętli histerezy napięcia powierzchniowego. Uzyskane wyniki wskazują, ze jednym z mechanizmów odpowiedzialnym za efekty zdrowotne wywoływane wdychaniem aerozoli metali i ich związków może być zmniejszenie aktywności surfaktantu płucnego.
Dynamic surface tension of pulmonary surfactant material was studied using the oscillating bubble technique. Surfactant after the contact with metallic dust collected at workplace (metal machining) demonstrated a reduced surface activity as reflected by the decrease of surface tension hysteresis. The results indicate that mechanisms of pulmonary health effects induced by inhalation of dusts of metals and their compounds may be related to surfactant inactivation.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 5; 53-54
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies