Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "sterowanie pociągiem" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Sterowanie pociągiem metra przez system automatycznego prowadzenia pociągu
Metro train control with ATC system
Autorzy:
Barański, S.
Błaszczyk, P.
Powiązania:
https://bibliotekanauki.pl/articles/1372631.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
automatyczne prowadzenie pociągu
ATC
sterowanie pociągiem
metro
pociąg
Opis:
SOP-2 and SOP-2P are an automatic train protection systems (ATP) designed to assist the driver in driving the train in the safest way. It provides relevant signal information in the cab, continuous monitoring of the actions of the driver and the motion of the train. SOP systems are designed to be transparent to the driver, as long as the traffic regulations are followed. If the traffic situation is regarded dangerous, SOP systems will intervene and brake the train down to a safe speed, or stop the vehicle before an obstacle. In this paper the interfaces between SOP electronic central unit and train were described. Logic of the presented solutions for this interface, due to safety functions they perform, is mainly based on relays, however an indisputable advantage of this system is its advanced concept, allowing in future using a higher level of automation and establishing the preconditions for a possible co-operation with other systems and also the next generation of technology.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2011, 3, 91; 95-98
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody lokalizacji pociągu na szlaku
Methods of localization the train
Autorzy:
Bergiel, K.
Powiązania:
https://bibliotekanauki.pl/articles/251877.pdf
Data publikacji:
2001
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
lokalizacja pociągów
PKP
pojazdy szynowe
sterowanie pociągiem
systemy ATP/ATC
transport kolejowy
Opis:
W dwóch kolejnych artykułach w TTS przedstawiony zostanie stan obecny i perspektywy rozwojowe urządzeń lokalizacji pociągów na szlaku oraz systemów ATP/ATC, eksploatowanych przez zaawansowane technicznie koleje świata oraz - na tym tle - sytuacja i potrzeby PKP w tej dziedzinie. Problematyka lokalizacji pociągu oraz jego automatycznej ochrony oraz prowadzenia są ze sobą powiązane i powinny być wspólnie opracowywane oraz projektowane, co zapewni ich właściwe współdziałanie i kompatybilność.
Źródło:
TTS Technika Transportu Szynowego; 2001, 8, 4; 38-41
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Systemy ATP/ATC a sytuacja PKP w tym zakresie
Systems ATP/ATC and situation in Poland
Autorzy:
Bergiel, K.
Powiązania:
https://bibliotekanauki.pl/articles/251604.pdf
Data publikacji:
2001
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
PKP
projekt ETCS
sterowanie pociągiem
system ATC
system ATP
system EBICAB
transport kolejowy
Opis:
W artykule, nawiązującym do artykułu z TTS 4/2001, przedstawiony zostanie pogląd autorki na stan obecny i perspektywy rozwojowe systemów ATP/ATC w krajach zaawansowanych technicznie oraz sytuację i potrzeby PKP w tym zakresie.
Źródło:
TTS Technika Transportu Szynowego; 2001, 8, 9; 34-37
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wielosystemowa lokomotywa BR 189 dla przewoźników europejskich
Multi-system locomotive class BR 189
Autorzy:
Biliński, J.
Iwański, R.
Powiązania:
https://bibliotekanauki.pl/articles/251933.pdf
Data publikacji:
2004
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
kolej w UE
pojazd trakcyjny
przetwornica IGBT
Siemens Sp.
sterowanie pociągiem
wielosystemowa lokomotywa BR 189
zasilanie trakcyjne
Opis:
Rozwój kolejowego systemu transportowego Unii Europejskiej i przygotowania do wdrożenia europejskiego systemu sterowania pociągiem - (European Train Control System) ETCS otworzył możliwości eksploatacji lokomotyw wielosystemowych. Siemens opracował nowy model lokomotywy wielosystemowej dla przewoźników europejskich, noszący nazwę BR 189. Lokomotywa ta jest zaprojektowana w dwóch wersjach: jako lokomotywa pasażerska osiągająca prędkość maksymalną 230 km/h oraz jako lokomotywa towarowa, której prędkość maksymalna wynosi 140 km/h. Moc ciągła lokomotywy w obu wersjach jest taka sama i wynosi: 6400 kW dla 25 kV 50 Hz i 15 kV 16 2/3 Hz; 6000 kW dla 3 kV DC; 4200 kW dla 1,5 kV.
Źródło:
TTS Technika Transportu Szynowego; 2004, 11, 1-2; 80-91
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of event recorders in automatic train control systems
Autorzy:
Jacyna, M.
Szczepański, E.
Izdebski, M.
Jasiński, S.
Maciejewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/224106.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rail transport
CBTC
ATC
JRU
Automatic Train Control
Communications-Based Train Control
Juridical Recording Unit
event recording unit
transport kolejowy
sterowanie pociągiem
Opis:
The development of railway transport in the current times is very noticeable, it is connected with the growing needs of movement as well as the development of information engineering. The increase in the demand for transport requires the implementation of solutions that increase the efficiency of the transport system. Both long-distance, agglomeration and metro railways can use different systems due to their specificity. Nevertheless, there is a noticeable trend in the development of systems supporting or even replacing the driver by the automation of selected activities. Such systems allow to reduce trains headway and thus increase the capacity of the line. CBTC class systems (Communications-based train control) belong to automatic train systems and are based on wireless transmission. The main purpose of using such systems is to increase the frequency of running trains while maintaining the level of safety. Computers that are on the system equipment record, process and analyse very large amounts of data. An essential element of such systems are recording units. The parameter recorders can be divided into technical and legal ones. However, for CBTC class systems, there is no obligation or requirement to use legal recorders as it is in the case of ETCS. However, it is necessary to use event recorders, and these are subject to the requirements set out in the PN-EN 62625-1: 2014 standard. The recorders are a very important component of safety systems, which is why they were analysed in this article. Both the driver, the vehicle and the infrastructure should be subject of continuous monitoring. The occurrence of an adverse event (not necessarily leading to an incident or accident) should be analysed and used to improve safety procedures. Currently, automatic systems are still developing and we are not able to accurately assess what the causes and effects of certain events may be, which is why data collection and analysis is particularly important. The article presents the general specification of the CBTC system. The parameters and properties of driving recorders should be presented. This article is cofinanced by the European Union POIR.01.01.01-00-0276/17
Źródło:
Archives of Transport; 2018, 46, 2; 61-70
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional safety verification of train control procedure in train-centric CBTC by colored Petri net
Autorzy:
Lin, Junting
Xu, Qian
Powiązania:
https://bibliotekanauki.pl/articles/949829.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
train control procedure
Train-centric CBTC
functional safety
formal methods
colored Petri net
procedura kontroli pociągu
sterowanie pociągiem
bezpieczeństwo funkcjonalne
metody formalne
sieci Petriego
Opis:
Communication-based Train Control (CBTC) system is a widely-used signaling system. There is an increasing demand for innovating the traditional ground-centric architecture. With the application of train-train communication, object control and other advanced techniques, Train-centric CBTC (TcCBTC) system is expected to be the most promising tendency of train control system. The safe tracking interval would be reduced as well as the life-cycle costs. Formal methods play an essential role in the development of safety-critical systems, which provides an early integration of the verifiable design process. In the paper, the architecture design of TcCBTC is first analyzed. The official system specification of TcCBTC has not issued, so it takes efforts to perform the systematic summarization of the functional requirements. Secondly, we propose an integrated framework that combines the Colored Petri Net (CPN) models with the functional safety verification of the underlying systems. Functional safety depends on the logic accuracy and is a part of overall safety. The framework also specifies what kinds of functions, behaviors or properties need to be verified. The train control procedure of TcCBTC is regarded as the link among new functional modules, thus it is chosen as the modelling content. Thirdly, the scenarios and the color sets are prepared. Models are established with the novel design thought from top to bottom. Simulation and testing are implemented during the model establishment to discover the apparent errors. Lastly, the model checking by state space is performed. All possible states are checked in detail. Standard behavioral properties and other user-defined properties are verified by state space report and ASK-CTL (Computation Tree Logic) queries, respectively. Verification results reveal that the models are reasonable to depict the dynamic behaviors of train control procedure. The functional safety properties are satisfied and prepared for further drafting the system functional specification.
Źródło:
Archives of Transport; 2020, 54, 2; 43-58
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problematyka współpracy pokładowego systemu ERTMS/ETCS z Polską
Verification of proper integration between onboard ERTMS/ETCS system with Polish railway infrastructure
Autorzy:
Adamski, D.
Ortel, K.
Powiązania:
https://bibliotekanauki.pl/articles/313534.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
logistyka transportu
pojazdy trakcyjne
sterowanie ruchem kolejowym
Europejski System Zarządzania ruchem Kolejowym
ERTMS
Europejski System Sterowania Pociągiem ETCS
system ERTMS/ETCS
ERTMS urządzenia pokładowe
homologacja pojazdów
transport logistics
traction vehicles
railway traffic control
European Train Control System
ETCS
ERTMS/ETCS system
Opis:
W artykule omówiono zagadnienie zunifikowania systemów kontroli jazdy pociągów, przedstawiono Europejski System Zarządzania Ruchem Kolejowym – ERTMS, Europejski System Sterowania Pociągiem – ETCS oraz przykładową procedurę testowania współpracy pokładowego systemu ERTMS z Polską infrastrukturą przytorową ERTMS poziomu 1 oraz 2.
Paper discussed the issues of achieving mutual compatibilyty between Control-Command and Signalling On-board and Trackside Subsystems. Particular attention was paid to tests perfomed for ERTMS/ETCS onboard units.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 6; 334-338, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies