Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "size effect" wg kryterium: Temat


Wyświetlanie 1-38 z 38
Tytuł:
Size effect at testing strength properties of concrete
Autorzy:
Akram, Amanda
Powiązania:
https://bibliotekanauki.pl/articles/1955920.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
concrete
size effect
tensile strength
Opis:
Various strength characteristics of concrete are considered as fracture parameters. The compressive strength of concrete is of paramount importance when designing concrete structures, whereas tensile strength of concrete is the basic property when estimating cracking resistance of a structure and analysing fracture processes in concrete. When testing the compressive strength of concrete, the results are dependent on the shape and dimensions of used specimens. Some findings reported in the literature suggest that size effect exists also when testing such fracture properties of concrete as tensile strength. Unfortunately this problem is much less recognized and described compared to size effect in compressive test results. In this paper, the experimental investigation is presented on how the length of cylindrical specimens influences the tensile splitting strength of concrete obtained by means of the Brazilian method. Additional variable parameters were: type of aggregate (natural gravel and crushed granite) and cement-water ratio (C/W = 1.8 and C/W = 2.6). In conducted laboratory experiments a higher splitting tensile strength of concrete was noted for all specimens with nominal dimensions of 150×150 mm, compared to specimens 150×300 mm in size, regardless of type of aggregate or cement-water ratio.
Źródło:
Budownictwo i Architektura; 2021, 20, 4; 37-45
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Importance of the Size of Local Government in Avoiding the Fiscal Distress - Empirical Evidence on Communes in Poland
Autorzy:
Galiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/16729115.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
fiscal distress
local government
size effect
Opis:
Theoretical background: In the literature on finance there are findings which examine reasons for the fiscal distress of units of the public sector, including local governments. However, this distress might be differently defined. Therefore, it determines both the approach to identify this phenomenon and the types of explanatory variables. Nevertheless, in the field of the business sector in the econometric models concerning the financial distress the size of the unit is considered. In this case there are also some possibilities to apply the correct proxy variable. This results from the fact that the size of local government might determine its fiscal capability as well as the level and structure of expenditures, which affect fiscal distress. Purpose of the article: The aim of this paper is to examine the influence of the size of the local government on the probability of the decrease of the exposure to the fiscal distress. Research methods: The author reviewed the literature in the field of the fiscal distress and introduced a multi-criteria decision analysis as well as a logistic regression modelling to examine this. The research procedure also required the use of the linear ordering to construct the dependent variable of the fiscal distress in order to analyse the “size effect” on the fiscal distress. Main findings: Fiscal distress of local governments is a core issue, which should be constantly analysed. It depends on the financial, economic, social and even political aspects. To identify exposure to this distress the TOPSIS method can be used. However, the fiscal distress can be affected by the size of the unit, which influences lots of budgetary categories. Due to the specificity of dependent and independent variables in the econometric models the “size effect” might be represented through the level of the population or the assets. Using the ordinal logistic regression in the research, the authors should consider that this effect can differ between the units with the disparate exposure. So, the partial proportional odds models can be required. Thus, the growth of the size of the unit, measured by the population, increases the odds of reaching very low exposure to fiscal distress. Simultaneously, there are some other important issues which should be included in this type of research.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio H – Oeconomia; 2022, 56, 5; 101-113
0459-9586
2449-8513
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio H – Oeconomia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ubiquitiformal fracture energy
Autorzy:
Ou, Z.-C.
Yang, M.
Li, G.-Y.
Duan, Z.-P.
Huang, F-L.
Powiązania:
https://bibliotekanauki.pl/articles/280189.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
fractal
ubiquitiform
fracture energy
size effect
Opis:
The ubiquitiformal fracture energy is proposed in the paper and its explicit expression is obtained. Moreover, the numerical results for concrete are found to be in good agreement with those for the critical strain energy release rate. The discrepancy between the numerical results of the traditional fracture energy and the critical strain energy release rate can be explained reasonably, which implies that the ubiquitiformal fracture energy should be taken as an available fracture parameter of materials. Finally, it is numerically found for some concrete that there is not size effect for the ubiquitiformal fracture energy.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 3; 1101-1108
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inner Size Effect in Layered Films with Eutectic Interaction of Components
Autorzy:
Dukarov, S.
Petrushenko, S.
Sukhov, V.
Churilov, I.
Samsonik, A.
Skryl, O.
Powiązania:
https://bibliotekanauki.pl/articles/1030004.pdf
Data publikacji:
2018-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
inner size effect
multilayer films
interfacial energy
Opis:
The results of the study of melting of Bi-Sn and Pb-Sn polycrystalline layered film systems with the thickness of 200-400 nm on a substrate with temperature gradient are given. Multilayer (each layer is of 10-20 nm) and bilayer films (layers are of 100-200 nm) of the same total thickness have been investigated. Broadening of the melting range in all films and lowering of melting point in multilayer samples compared to the bilayer ones have been observed. The observed phenomena are discussed within existing thermodynamic concepts in consideration of interfacial energy of contacting layers of components and energy of grain boundaries in polycrystalline films.
Źródło:
Acta Physica Polonica A; 2018, 133, 5; 1186-1190
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On some problems in determining tensile parameters of concrete model from size effect tests
Autorzy:
Marzec, Ireneusz
Bobiński, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/260481.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
concrete
size effect
fracture energy
elasto-plasticity
XFEM
Opis:
The paper presents results of numerical simulations of size effect phenomenon in concrete specimens. The behaviour of in-plane geometrically similar notched and unnotched beams under three-point bending is investigated. In total 18 beams are analysed. Concrete beams of four different sizes and five different notch to depth ratios are simulated. Two methods are applied to describe cracks. First, an elasto-plastic constitutive law with a Rankine criterion and an associated flow rule is defined. In order to obtain mesh independent results, an integral non-local theory is used as a regularisation method in the softening regime. Alternatively, cracks are described in a discrete way within Extended Finite Element Method (XFEM). Two softening relationships in the softening regime are studied: a bilinear and an exponential curve. Obtained numerical results are compared with experimental outcomes recently reported in literature. Calculated maximum forces (nominal strengths) are quantitatively verified against experimental values, but the force – displacement curves are also examined. It is shown that both approaches give results consistent with experiments. Moreover, both softening curves with different initial fracture energies can produce similar force-displacement curves.
Źródło:
Polish Maritime Research; 2019, 2; 115-125
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of dynamic growth of a micro-scaled void based on strain gradient elasto-plasticity
Autorzy:
Ma, Xinbing
Liu, Jinxing
Wang, Jiadong
Pan, Hao
Powiązania:
https://bibliotekanauki.pl/articles/1839598.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
dynamic void growth
size effect
inertia
thermal softening
Opis:
Void initiation and growth serve as an important mechanism in ductile failures in metals. Particularly, on the micron-level, the extra hardening effect associated with strain gradient is accounted for by adopting strain gradient elasto-plasticity instead of the conventional plasticity. Effects of inertial, strain gradient hardening and thermal softening are formulated analytically for the case where a spherical void expands under external hydrostatic stress. As demonstrated by our results, the inertia effect firstly tends to hinder but then promotes the void growth. The threshold stress required for rapid void growth is lifted due to extra hardening of strain gradient so that the growth of a smaller void is delayed more remarkably. A considerable thermal softening phenomenon is observed here, which is caused by plastic work during the deformation process. The final void growth rate is mainly related to the maximum loading, which is consistent with the prediction based on the classical plastic theory.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 4; 927-941
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of particle size and feed rate on coal cleaning in a dry separator
Autorzy:
Kademli, M.
Gulsoy, O. Y.
Powiązania:
https://bibliotekanauki.pl/articles/110339.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dry coal cleaning
particle size effect
air separator
Opis:
This research is concerned with the effects of particle size distribution and feed rate of feed on the coal cleaning performance of table type air separator. In tests, the lignite and hard coal samples from Mugla and Zonguldak districts in Turkey were used. The samples were tested in three different size distributions such as –38 + 6 mm, –19 + 6 mm and –9.5 + 6 mm. The effect of particle size was investigated together with the feed rate 2 Mg/(hm2), 1.68 Mg/(hm2) and 1.32 Mg/(hm2) and very important physical parameters of table type air separator such as, riffle height, table slope and table frequency. Results were analyzed by using the Tromp curve for indicating the effects in detail. Consequently, the results revealed that the particle size had remarkable effect on separation efficiency. The separation efficiency was, however, inversely affected as the particle size distribution became finer, and the best results were obtained in particle size distribution was –38 + 25 mm in both sample tested. The Ep value was 0.11 for the hard coal samples while it was 0.13 for the lignite samples.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 204-213
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of pre-tension on torsion of microscale Cu wires: a study via strain gradient theory
Autorzy:
Ma, Xinbing
Liu, Jinxing
Powiązania:
https://bibliotekanauki.pl/articles/280360.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
nonproportional loading
strain gradient plasticity
size effect
cyclic response
Opis:
Nonproportional plastic deformations on the microscale are an emerging topic. A simplified theory of strain gradient elasto-plasticity is developed to study the evolution of yield strength in a copper wire sequentially experiencing tension and torsion. The pre-tension deformation and stress are inherited to the upcoming torsion process, resulting in a nonproportional loading condition. With consideration of the extra hardening effect due to strain gradient, pre-tension weakens the extra hardening effect of the strain gradient and the dependence on the wire radius. Cyclic torsion behavior is also investigated. Anomalous Bauschinger effect and plastic softening are found.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 4; 1055-1065
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue life prediction of aluminium profiles for mechanical engineering
Autorzy:
Tomaszewski, T.
Sempruch, J.
Powiązania:
https://bibliotekanauki.pl/articles/281070.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
aluminium profile
high-cycles fatigue
mini specimen
size effect
Opis:
The study presents a method to determine the σa − N curve (high cycle fatigue) for profiles made of AW-6063 T6 aluminium alloy. Experimental material data for a mini specimen taken directly from the tested item and selected empirical correlations allowing for a size effect have been used. A model yielding the lowest relative error of estimating the fatigue life is presented.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 2; 497-507
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on optimization method of flotation kinetic model based on molybdenite particle size effect
Autorzy:
Wan, He
An, Yanni
Qu, Juanping
Zhang, Chonghui
Xue, Jiwei
Wang, Sen
Bu, Xianzhong
Powiązania:
https://bibliotekanauki.pl/articles/24085892.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
particle size effect
molybdenite
mathematical model
method of correction
Opis:
Flotation kinetic models can be applied to describe the flotation process and to predict mineral recoveries. However, the size composition of the target minerals in the feed ore fluctuates considerably, resulting in insufficient accuracy with flotation kinetic models. There have been many studies that focus on the investigation of flotation kinetics with different particle sizes, while the optimization methods for flotation kinetic models based on particle size effects have not been reported. In this paper, flotation tests, optical microscope observations, and particle size analysis were used to identify the reasons for the decrease in accuracy of the flotation kinetic model due to changes in the composition of molybdenite particle size. Additionally, an optimization method for the flotation kinetic model was developed based on the particle size effect. The test results show that the accuracy of the flotation kinetic model for fixed particle size minerals is very high, but the predicted results for flotation recoveries of different particle size mineral mixtures have large deviations. The poor accuracy might be due to the autogenous carrier effect caused by the particle size composition fluctuating considerably. The optimization method for the flotation kinetic model is based on the particle size effect. The model can accurately describe the flotation process of molybdenite with different size compositions of molybdenite and predict the flotation recovery of molybdenite.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 2; art. no. 163004
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
2D Lattice Model for Fracture in Brittle Materials
Autorzy:
Kozicki, J.
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/241484.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
beam
brittle material
discrete method
fracture
lattice model
size effect
Opis:
The numerical simulations show the potential of a lattice discrete approach to model fracture during brittle materials in different two-dimensional quasi-static processes of loading behaviour. The 2D calculations were carried out for brittle specimens subject to uniaxial compression, uniaxial extension and shear. The effect of the specimen size on the global stress-strain diagram during uniaxial tension was also investigated. The advantages and disadvantages of the model were outlined.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2006, 53, 2; 137-154
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some Physical Properties of Copper Oxide Thin Films Prepared by Electrolysis Method
Autorzy:
Oudah, Mustafa H.
Mazin, H. Hasan
Abd, Ahmed N.
Powiązania:
https://bibliotekanauki.pl/articles/1065248.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
copper oxide
drop-casting method
electrolysis
quantum size effect
thin films
Opis:
The aim of this paper is to study the properties of copper oxide thin films prepared by electrolysis method and deposited on glass substrates by drop-casting method at different annealing temperatures. Copper oxide colloidal was successfully prepared by electrolysis method. The X-ray diffraction confirms the polycrystalline structure of the films. Atomic force microscopy shows that the increase in the annealing temperature improves the surface morphology, increases the grain size and removes the cracks. The best optical transmittance was for the film annealed at 200 ºC. The bandgap decreases from 3.35 eV to 3.15 eV as a result of increasing the annealing temperature. The wide bandgap that obtained in this study is due to quantum size effect.
Źródło:
World Scientific News; 2019, 135; 59-70
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dependence of creep failure probability on the size of metallic specimens
Autorzy:
Nowak, K.
Powiązania:
https://bibliotekanauki.pl/articles/387437.pdf
Data publikacji:
2013
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
size effect
creep damage
cellular automata
efekt rozmiarowy
zniszczenie przy pełzaniu
pełzanie
Opis:
The occurrence of statistical size effect is considered for damage in creep conditions. The numerical and experimental analysis have been performed. The obtained results are ambiguous. Numerical models confirm the scale effect which can be statistical or deterministic one. But this effect has no experimental verification. It may suggest that the weakest link model cannot be applied in creep conditions. Explanation of this needs further investigations.
Źródło:
Acta Mechanica et Automatica; 2013, 7, 3; 166-169
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental tool for micro-extrusion of metals
Autorzy:
Piwnik, J.
Mogielnicki, K.
Gabrylewski, M.
Baranowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/381943.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
microforming
microextrusion
size effect
experimental tool
mikroformowanie
mikrowyciskanie
efekt skali
narzędzie doświadczalne
Opis:
In paper the technological tools requirements, used for micro-extrusion of metals in cold and warm conditions are presented. The constructive principles for the micro-tools are also described. The influence of the size effect in a workpiece and a tool top layers roughness form on extrusion processes in microscale are showed. The tool, designed to an experimental verification of the size effect influence, in a tool roughness form, on the metal rod forward extrusion are presented. This tool is made in the form of two halves, joined together by the pegs and screws. It has bored two dies profiles with the same dimensions, the only difference is a degree of the containers roughness. That solution gives a possibility to specify the influence of the tool roughness degree on the extrusion forces, deformation process and a product quality. Described tool was designed in such a way to manufacture it with using conventional machining equipment.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 195-198
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the size effect of auxetic cellular materials
Autorzy:
Janus-Michalska, M.
Powiązania:
https://bibliotekanauki.pl/articles/265410.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
negative Poissons ratio
auxetic structures
size effect
właściwości sprężyste
próba ścinania
kompresja
Opis:
The objective of this paper is to investigate the effects of scale of an auxetic cellular material sample on the evaluation of elastic properties. Size and boundary effects are studied in detail. This is achieved by conducting computer simulations of the auxetic structure under the typical loading exerted by the compression and simple shearing test performed by means of ABAQUS FEA. The material microstructure is discretized by the plane network of Timoshenko beam elements. The results of the studies give insight to the scale effects. Structures with designed properties can be potentially used for engineering applications.
Źródło:
International Journal of Applied Mechanics and Engineering; 2017, 22, 3; 749-757
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulations of the Effects of Droplet Size and Concentration on Vapour-Droplet JP-10/Air Detonations
Autorzy:
Liu, L.
Zhang, Q.
Powiązania:
https://bibliotekanauki.pl/articles/358150.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
multiphase detonation
discrete phase model
evaporation and breakup model
droplet size effect
initial concentration effect
Opis:
Two-dimensional simulations were conducted for JP-10 mono-dispersed vapour-droplet detonation in air, based on the detonation mechanism for clouds and validation of the extending critical droplet size limits in previous tests. In the simulations, the discrete phase model combined with the droplet evaporation and droplet breakup models was used. Utilizing a wide range of mono-dispersed droplet sizes and initial droplet concentrations, all cases of JP-10 droplets with a certain amount of pre-vaporized fuel can successfully achieve the deflagration to detonation transition. Detonation velocities at the equivalent concentration with droplet diameters no larger than 50 μm are in good agreement with the theoretical detonation velocities. The effects of droplet size and initial droplet concentration on the detonation behaviour were also investigated. Detonation velocities attained with droplet diameters below 50 μm appear to decrease very slightly with droplet size, but are almost equal to the velocity in gases. When the droplet diameter is above 50 μm, there is a decrease in simulated detonation velocity compared with fine droplets, and no secondary pressure peak was observed. For fuel-rich combustion, detonation velocities decrease rapidly with an increase in initial droplet concentration, and post-wave pressure fluctuation was obviously irregular, caused by the secondary local explosion of the droplets.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 175-190
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon nanotubes with controlled length – preparation, characterization and their cytocompatibility effects
Autorzy:
Cendrowski, K.
Jedrzejczak-Silicka, M.
Powiązania:
https://bibliotekanauki.pl/articles/778531.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Multiwalled carbon nanotubes
cutting carbon nanotubes
size effect
mitochondrial activity
biocompatibility
apoptosis
necrosis
Opis:
Multiwalled carbon nanotubes (MWCNTs) have attracted huge attention due to their multifunctionality. Their unique properties allows for covalent and noncovalent modifi cations. The most simple method for functionalization of carbon nanotubes is their decoration with the oxygen containing moieties which can be further simultaneously functionalized for design of new class carriers for targeting and imaging. Here, we present methodology for chopping nanotubes, characterization of MWCNTs, the effect of size on the biocompatibility in culture of L929 mouse fi broblasts using WST-1, LDH and apoptosis assays. The analysis provides the optimal carbon nanotubes length and concentration which can be used for functionalization in order to minimize the effect of the secondary agglomeration when interacting with cells.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 2; 71-79
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Size Effects in Problems of Footings on Sand within Micro-Polar Hypoplasticity
Autorzy:
Tejchman, J.
Górski, J.
Powiązania:
https://bibliotekanauki.pl/articles/241079.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
footing
micro-polar hypoplasticity
sand
shear localization
size effect
stratified sampling
void ratio
Opis:
Numerical FE investigations of size effects in problems of footings on sand were performed. Micro-polar hypoplastic constitutive model was used to describe a mechanical behaviour of a cohesionless granular material during a monotonic deformation path. The FE analyses were carried out with three different footing widths. In deterministic calculations, a uniform distribution of initial void ratio was used. In statistical calculations, initial void ratios took the form of random spatial fields described by a truncated Gaussian random distribution. In order to reduce the number of stochastic realizations without sacrificing the accuracy of the calculations, a stratified sampling method was applied. The numerical results were compared with corresponding laboratory tests by Tatsuoka et al (1997). The numerical results show that the bearing capacity of footings decreases with increasing specimen size. If the initial void ratio is stochastically distributed, the mean bearing capacity of footings may be larger than the deterministic value. The statistical size effect is smaller than the deterministic one.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2008, 55, 3-4; 95-124
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A shifted Wald decomposition of the numerical size-congruity effect: Support for a late interaction account
Autorzy:
Faulkenberry, Thomas J.
Vick, Adriana D.
Bowman, Kristen A.
Powiązania:
https://bibliotekanauki.pl/articles/2129181.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Size congruity effect
response time modeling
accumulator model
shifted Wald distribution
Opis:
Decisions involving comparisons of Arabic number digits often exhibit an interference between the physical size of the digit and the implied numerical magnitude, a phenomenon called the size-congruity effect. Related research over the past four decades has yielded two competing models of the phenomenon: an early interaction account, where interference between numerical and physical magnitude occurs at an early encoding stage, and a late interaction account, where the interference occurs downstream as response competition during the decision process. In the present study, we asked participants to compare the physical sizes of pairs of Arabic digits. We fit the resulting response time distributions with a shifted Wald model, a single boundary accumulator model, which gave us estimates of information accumulation rate (drift rate), response threshold, and nondecision time. We found that incongruity between physical size and numerical magnitude affected the decision-related estimates of drift rate and response threshold. Further, a Bayesian analysis confirmed a null effect of congruity on nondecision time. These results indicate that the observed interference originates from decision-related processes, lending further support for a late interaction account of the size-congruity effect.
Źródło:
Polish Psychological Bulletin; 2018, 49, 4; 391-397
0079-2993
Pojawia się w:
Polish Psychological Bulletin
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
VOCABULARY GLOSSING: A META-ANALYSIS OF THE RELATIVE EFFECTIVENESS OF DIFFERENT GLOSS TYPES ON L2 VOCABULARY ACQUISITION
Autorzy:
Vahedi, Vahideh Sadat
Ghonsooly, Behzad
Pishghadam, Reza
Powiązania:
https://bibliotekanauki.pl/articles/955891.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej w Lublinie. IATEFL Poland Computer Special Interest Group
Tematy:
hypertext gloss
vocabulary acquisition
meta-analysis
effect size
heterogeneity
Opis:
In recent years there has been a growing interest to incorporate hypertext glosses into L2 reading materials and accordingly, it has provoked researchers to uncover to what extent and under which moderator variables a specific type of gloss yields more effective outcomes than other types of glossing. The present meta-analysis attempts to examine the magnitude of the effect of different gloss types (single vs. multiple glosses) on L2 vocabulary acquisition along with identification of the contextual factors that influence between-study variation through synthetizing 34 primary articles which satisfy the inclusion criteria. The overall effect size is found to be + 0.83 (p<0.05), indicating that multiple glosses (text+visual) has a large, positive effect on learners’ vocabulary acquisition than single mode of glossing (text-only). Moderator analyses further suggest that intensity of the program and L2 proficiency level are potential moderators influencing the heterogeneity between effect sizes, whereas the learning context, sample size and research design do not have such impact.
Źródło:
Teaching English with Technology; 2016, 16, 1; 3-25
1642-1027
Pojawia się w:
Teaching English with Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Country selection strategies for portfolio management
Autorzy:
Zaremba, Adam
Konieczka, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/950658.pdf
Data publikacji:
2015
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
value effect
size effect
momentum
volatility effect
anomaly of low risk
inter-market effects
cross-section analysis of returns
factor returns
international diversification
asset pricing
Opis:
This study examines 16 country selection strategies based on inter-market value, size, momentum, quality and volatility effects. We investigate a sample of 78 countries for the period 1999-2014. Having considered country-specific dividend tax rates, market liquidity and openness for investment flows we can state that chosen strategy based on earnings to price ratio proves useful for investors. Momentum strategies should be approached with caution, as they appear effective only in small markets and may lead to loses in large markets. Selecting low leveraged and illiquid countries also proves beneficial. The relation between volatility displays different characteristics for open and closed economies.
Źródło:
Financial Sciences. Nauki o Finansach; 2015, 1(22); 101-119
2080-5993
2449-9811
Pojawia się w:
Financial Sciences. Nauki o Finansach
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Size of Source Effect on Accuracy of LWIR Radiation Thermometers
Autorzy:
Cywiak, D.
Cárdenas-García, D.
Rodriguez-Arteaga, H.
Powiązania:
https://bibliotekanauki.pl/articles/221785.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
size of source effect
radiation thermometer
temperature
field of view
Opis:
Determining the size of source effect of a radiation thermometer is not an easy task and manufacturers of these thermometers usually do not indicate the deviation to the measured temperature due to this effect. It is one of the main uncertainty components when measuring with a radiation thermometer and it may lead to erroneous estimation of the actual temperature of the measured target. We present an empiric model to estimate the magnitude of deviation of the measured temperature with a long-wavelength infrared radiation thermometer due to the size of source effect. The deviation is calculated as a function of the field of view of the thermometer and the diameter of the radiating source. For thermometers whose field of view size at 90% power is approximately equal to the diameter of the radiating source, it was found that this effect may lead to deviations of the measured temperature of up to 6% at 200ºC and up to 14% at 500ºC. Calculations of the temperature deviation with the proposed model are performed as a function of temperature and as a function of the first order component of electrical signal.
Źródło:
Metrology and Measurement Systems; 2016, 23, 4; 661-667
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wielkości kropli na kinetykę zwilżania w układzie SAC305/Ni
The influence of the drop-size effect on the wetting kinetics in SAC305/Ni system
Autorzy:
Turalska, P.
Sobczak, N.
Kudyba, A
Nowak, R.
Homa, M.
Siewiorek, A.
Boroń, Ł.
Klasik, A.
Powiązania:
https://bibliotekanauki.pl/articles/391805.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
kinetyka zwilżania
kąt zwilżania
lutowanie bezołowiowe
SAC305
nikiel
efekt wymiarowy kropli
wetting kinetics
contact angle
lead-free soldering
nickel
drop-size effect
Opis:
Badania wpływu efektu wymiarowego kropli na kinetykę zwilżania niklu bezołowiowym stopem na bazie cyny przeprowadzono metodą kropli leżącej w próżni w temperaturze 260°C. Do badań użyto komercyjny stop lutowniczy na bazie cyny SAC305 (Ag – 3,0% wag., Cu – 0,5% wag.) oraz wypolerowane podłoże niklowe o czystości 99,8%. Podczas testu zwilżalności stosowano osobne nagrzewanie badanej pary materiałów do temperatury badań, umieszczając próbkę stopu w kroplówce grafitowej nad powierzchnią podłoża niklowego. Po osiągnięciu wymaganej temperatury z kapilary wyciskano kroplę stopu i osadzano ją na podłożu. Po 30 sekundach wyciskano kolejną kroplę i osadzano ją na pierwszą, zwiększając tym samym objętość kropli dwukrotnie. Proces dokraplania powtarzano 9 razy co 30 sekund, osiągając 10-krotną objętość kropli w porównaniu do stanu pierwotnego. Po badaniach zwilżalności schłodzoną parę materiałów kropla/podłoże przecinano prostopadle do badanej powierzchni podłoża i poddano badaniom na ścinanie oraz analizie strukturalnej poprzecznego przekroju próbki metodami mikroskopii optycznej i skaningowej mikroskopii elektronowej w połączeniu z lokalną analizą składu chemicznego. Badania zwilżalności nie wykazały istotnych różnic wartości kąta zwilżania ciekłego stopu SAC305 na podłożu niklowym po wielokrotnym dokraplaniu, albowiem wartości kąta zwilżania każdorazowo mierzone w 30. sekundzie kontaktu z podłożem Ni były dla wszystkich 10 kropel zbliżone i wynosiły θ = 35 ±2°. Stwierdzona wysoka powtarzalność pomiarów θ świadczy zarówno o braku występowania efektu wymiarowego w badanym zakresie objętości kropli SAC305, jak i o chemicznej i fizycznej jednorodności powierzchni podłoża. Uzyskane wyniki wskazują na przydatność metody kropli leżącej do oceny jakości powierzchni, szczególnie przydatnej do badań jakości cienkich warstw i pokryć technologicznych stosowanych w procesach łączenia różnorodnych materiałów.
The studies of the drop-size effect on the wetting kinetics of the nickel substrate by lead-free solder were performed by the sessile drop method in a vacuum at a temperature of 260°C. In this work, Sn-based alloy SAC305 (Ag – 3.0 wt. %, Cu – 0.5 wt. %) and polished nickel substrate (99.8%) were used. During the wettability tests, a separate heating of the couple of materials to a test temperature was performed by placing a sample of SAC305 alloy in a graphite capillary above the nickel substrate. After reaching the test temperature, the SAC305 drop was squeezed from the capillary and deposited on the Ni substrate. After 30 seconds, the second drop was squeezed and deposited on the first one, thereby increasing the volume of the drop twice. The process was repeated 9 times every 30 seconds reaching a 10 times larger drop volume, compared to the first drop. After wettability tests, the solidified drop/substrate couple was cooled, cut and subjected to a shear test and structural analysis by optical microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy analysis. Wettability studies have not shown a significant difference between the values of the contact angle obtained for each drop produced by subsequent adding of nine drops despite their different size of ten drops produced on the substrate, their contact angle values formed after 30 second contact time were similar showing θ = 35 ±2°. High repeatability of the measured contact angle value θ demonstrates not only physical homogeneity of the substrate surface but it presents a lack of size effect over a range of SAC305 drop volume used in this study. The obtained results demonstrate the suitability of the sessile drop method for surface quality evaluation, particularly for quality tests of thin technological layers or coatings used in joining dissimilar materials.
Źródło:
Prace Instytutu Odlewnictwa; 2015, T. 55, nr 2, 2; 3-17
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nośność na przebicie krępych płyt żelbetowych – badania i analiza metodą S-T
Punching shear behavior of thick reinforced concrete slabs according to Strut-and-Tie model
Autorzy:
Urban, T.
Krakowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/391037.pdf
Data publikacji:
2014
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
metoda kratownicowa (strut-and-tie)
przebicie osiowe
smukłość ścinania
fundament
efekt skali
Strut-and-tie model
punching shear
shear slenderness
footing
size effect
Opis:
W pracy przedstawiono próbę analizy nośności na przebicie płyt krępych za pomocą metody kratownicowej (strut-and-tie, S-T). Procedura obliczeniowa została porównana z wynikami własnych badań eksperymentalnych. Zakres analizy obejmuje wyłącznie elementy bez zbrojenia poprzecznego obciążone osiowo symetrycznie.
The punching shear behavior of thick reinforced concrete slabs was analyzed in this paper by using strut-and-tie model (S-T). Calculating procedures were compared to our own experimental test results. The analyzed elements were subjected to symmetric loading and without shear reinforcement.
Źródło:
Budownictwo i Architektura; 2014, 13, 3; 183-191
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane wskaźniki wielkości efektu w badaniach psychologicznych
Autorzy:
Prajzner, Arkadiusz
Powiązania:
https://bibliotekanauki.pl/articles/33951763.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
effect size
null hypothesis
statistical analysis
psychological research
wielkość efektu
hipoteza zerowa
analiza statystyczna
badania psychologiczne
Opis:
Odzwierciedlając zmieniającą się praktykę statystyczną w badaniach psychologicznych, w której dominuje testowanie hipotez zerowych z wykorzystaniem decyzji o poziomie istotności wyników, wskazano zalecenia dotyczące raportowania w pracach wielkości efektu. W opracowaniu przedstawiono pojęcie wielkości efektu oraz wskazano miejsce, jakie zajmuje w analizie danych w odniesieniu do istotności wyników. Celem pracy jest opisanie wybranych wskaźników wielkości efektu, a także wskazanie potrzeby zastosowania i poprawnej ich prezentacji i interpretacji w raporcie analiz prac empirycznych z zakresu nauk społecznych. Biorąc pod uwagę ograniczenia podejścia statystycznej analizy danych opartej jedynie na poziomie istotności, w opracowaniu zaprezentowano możliwości umieszczania w analizach danych wskaźnika o większym praktycznym zastosowaniu, jakim jest wielkość efektu. Wykorzystując najbardziej popularne metody analityczne, takie jak testy t Studenta, jednoczynnikowe analizy wariancji w schematach między- i wewnątrzgrupowych, a także analizy testem Wilcoxona, U Manna-Whitneya, H Kruskala-Wallisa, testem Friedmana oraz uwzględniając analizy dla danych jakościowych, zaprezentowano dobrane do planów badawczych wskaźniki wielkości efektu. Ponadto opisano wykorzystanie, sposób obliczania oraz interpretację wybranych wskaźników wielkości efektu, jakimi są wskaźniki: d Cohena, g Hedgesa, delta, rg Glassa, korelacja par dopasowanych rc, eta-kwadrat, omega-kwadrat oraz epsilon-kwadrat, W Kendalla oraz fi, V Cramera czy iloraz szans i ryzyko względne. Prezentację wskaźników wielkości efektu zestawiono z odpowiadającymi im planami badawczymi i rodzajem zebranych danych.
Reflecting the changing statistical practice in psychological research, dominated by null hypothesis testing using a decision about the level of significance of the results, the recommendations are indicated for reporting effect sizes in papers. The study presents the concept of the effect size and indicates its place in data analysis regarding to outcome’s significance. The purpose of the work is to describe selected effect size indicators and to point the need of use and their proper presentation and interpretation in social sciences empirical work data analysis reports. Considering statistical analysis approach limits based on significance level only, the study presents the possibility of including in the data analysis an indicator of a more practical use which is the size of the effect. By using the most popular analysis methods, such as, Student t-test, univariate analyses of variance in between- and within-group schemes as well as Wilcoxon test, Mann-Whitney’s U, Kruskal-Wallis H, Friedman’s test and considering analysis for qualitative data, matched to research plans indicators of the effect size were presented. The paper presents the use, calculation and interpretation of the size effect such as: Cohen’s d, Hedges g, delta, Glass’s rg, matched pairs correlation rc, eta-square, omega-square and epsilon-square, Kendall’s W and fi, Cramer’s V as well as odds ratio and relative risk. The presentation of the effect size indicators was contrasted with the corresponding research plans and the type of data collected.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio J – Paedagogia-Psychologia; 2022, 35, 4; 139-157
0867-2040
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio J – Paedagogia-Psychologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometrically nonlinear vibrations of thin visco-elastic periodic plates on a foundation with damping: non-asymptotic modelling
Autorzy:
Jędrysiak, J.
Powiązania:
https://bibliotekanauki.pl/articles/280289.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
thin visco-elastic periodic plates
nonlinear vibrations
effect of microstructure size
analytical tolerance modelling
Opis:
The objects under consideration are thin visco-elastic periodic plates with moderately large deflections. Geometrically nonlinear vibrations of these plates are investigated. In order to take into account the effect of microstructure size on behaviour of these plates a non- -asymptotic modelling method is proposed. Using this method, called the tolerance modelling, model equations with constant coefficients involving terms dependent on the microstructure size can be derived. In this paper, only theoretical considerations of the problem of nonlinear vibrations of thin visco-elastic periodic plates resting on a foundation with damping are presented.
Źródło:
Journal of Theoretical and Applied Mechanics; 2016, 54, 3; 945-961
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interpretacja statystyk w ar tykułach naukowych – wskazówki dla praktyków
the interpretation of the statistical data in scientific papers – advices for practitioners
Autorzy:
Budzicz, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/514261.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
wielkość efektu
istotność statystyczna
przedziały ufności
interpretowanie danych statystycznych.
effect size
statistical significance
confidence interval
interpretation of statistical data.
Opis:
Artykuł zawiera informacje o tym, jak interpretować podstawowe dane statystyczne: wskaźniki istotności statystycznej, wielkości efektu i przedziały ufności. Pokazano kilka heurystyk użytecznych przy interpretacji wielkości efektów korelacji r Pearsona, statystyki d Cohena oraz relatywnego ryzyka. Olbrzymia większość pozostałych efektów jest pochodną wyżej wymienionych. Dodatkowo wskazano również, jakie są ograniczenia wybranych wskaźników, szczególnie istotności statystycznej. Artykuł jest pomyślany jako pomoc szczególnie dla psychologów praktyków.
The article contains information how to interpret statistical data: statistical significance, effect size and confidence intervals. Several heuristics are given how to usefully interpret the magnitude of the correlation Pearson’s r, Cohen’s d and relative risk. The vast majority of other effects is a derivative of the aforementioned. In addition, I also show the limitations of selected indicators, especially statistical significance. This article is intended as an aid especially for psychologists practitioners.
Źródło:
Psychologiczne Zeszyty Naukowe; 2017, 1; 143-158
2451-1420
Pojawia się w:
Psychologiczne Zeszyty Naukowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Higher order vibrations of thin periodic plate bands with various boundary conditions
Autorzy:
Jędrysiak, J.
Wyrwa, P.
Powiązania:
https://bibliotekanauki.pl/articles/127710.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
periodic plates
effect of microstructure size
higher order vibrations
tolerance modelling
płyty periodyczne
rozmiar mikrostruktury
drgania wyższego rzędu
modelowanie tolerancyjne
Opis:
In this contribution there are considered thin periodic plates. The tolerance averaging method, cf. [12, 13, 4], is applied to model problems of vibrations of these plates. Hence, the effect of the microstructure size is taken into account in model equations of the tolerance model. Calculations are made for periodic plate bands using this model and the asymptotic model for various boundary conditions.
Źródło:
Vibrations in Physical Systems; 2016, 27; 181-186
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Scale effect in direct shear tests on recycled concrete aggregate
Autorzy:
Soból, E.
Sas, W.
Szymański, A.
Powiązania:
https://bibliotekanauki.pl/articles/178477.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
direct shear test
recycled concrete aggregate
scale effect
box size
Opis:
The depletion of natural resources is forcing researchers to explore the possibilities of new aggregates, such as recycled concrete aggregate (RCA). In this article, the mechanical properties and the influence of the size of the direct shear box on the obtained parameters were examined. The study was conducted in two apparatus: medium (120 × 120 mm) and large (250 × 250 mm). In each of these devices, a total of 6 tests were performed: 3 for dry sample and 3 at optimum moisture content. From the results, the conclusions described below have been drawn.
Źródło:
Studia Geotechnica et Mechanica; 2015, 37, 2; 45-49
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pojęcie wielkości efektu na tle teorii Neymana-Pearsona testowania hipotez statystycznych
The concept of size effect in the light of Neyman-Pearson’s theory of testing statistical hypothesis
Autorzy:
Szymczak, Wiesław
Powiązania:
https://bibliotekanauki.pl/articles/2014018.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
teorie testowania hipotez statystycznych
prawdopodobieństwo
moc testu
empiryczna moc testu
wielkość efektu
theories of statistical hypothesis testing
probability
power of test
empirical power of test
effect size
Opis:
Celem tej pracy jest zwrócenie uwagi badaczy wykorzystujących metody statystyczne w analizie wyników swoich badań na pomieszanie dwóch różnych teorii testowania hipotez statystycznych, teorii Fishera i teorii Neymana–Pearsona. Zawarcie, w obecnie stosowanym instrumentarium statystycznym, pomysłów z obu tych teorii, powoduje, że znakomita większość badaczy bez chwili namysłu za prawdziwą przyjmuje stwierdzenie, iż im mniejsze prawdopodobieństwo, tym silniejsza zależność. Przedstawione zostały słabe strony teorii Neymana–Pearsona i wynikające z nich problemy przy podejmowaniu decyzji w wyniku przeprowadzonych testów. Problemy te stały się usprawiedliwionym poszukiwaniem mniej zawodnych rozwiązań, jednakże zaproponowane mierniki wielkości efektu, jako wykorzystujące z jednej strony dogmat o związku między wielkością prawdopodobieństwa w teście i siłą zależności, a z drugiej – brak jakichkolwiek podstaw teoretycznych tego rozwiązania, wydają się jeszcze jednym pseudorozwiązaniem rzeczywiście występujących problemów. Dodatkowo, wykorzystywanie mierników wielkości efektów wygląda na próbę zwolnienia badaczy z głębokiego myślenia o uzyskanych wynikach z analizy statystycznej, w kategoriach merytorycznych. Powstał trywialny przepis: odpowiednia wartość miernika natychmiast implikuje siłę zależności – podejście takie wydaje się niegodne badacza.
The aim of this study is to draw the attention of researchers using statistical methods in the analysis of the results of their research on the combination of two different theories testing statistical hypothesis, Fisher’s theory and Neyman-Pearson’s theory. Including in the presently used statistical instruments, ideas of both of these theories, causes that the vast majority of researchers without a moment’s thought, acknowledge that the smaller the probability the stronger relationship. The study presents the weaknesses of Neyman-Pearson’s theory and the resulting problems with decision-making as a result of the conducted tests. These problems have become a justified quest for less unreliable solutions, however, the proposed measures of the size effect as using on one hand dogma about the relationship between the degree of probability in the test and the strength of dependence, on the other, lack of any theoretical basis of this solution, seem to be another pseudo solution to actual problems. Moreover, the use of measures of size effect seems to be an attempt to free researchers from the profound thinking about the results obtained from the statistical analysis. A trivial recipe was established: the corresponding value of the measures instantly implies the strength of the relationship – this approach seems unworthy of the researcher.
Źródło:
Acta Universitatis Lodziensis. Folia Psychologica; 2015, 19; 5-41
2353-4842
Pojawia się w:
Acta Universitatis Lodziensis. Folia Psychologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Distillation Conditions for Improved Recovery of Phthalides from Celery (Apium graveolens L.) Seeds
Autorzy:
Kokotkiewicz, Adam
Badura, Anna
Tabaczyńska, Żaneta
Lorenc, Andżelika
Buciński, Adam
Luczkiewicz, Maria
Powiązania:
https://bibliotekanauki.pl/articles/1363267.pdf
Data publikacji:
2021-06-07
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
alkylphthalides
enzyme pretreatment
hydrodistillation
salting-out effect
simultaneous distillation-extraction
size reduction
Opis:
The essential oil of celery (Apium graveolens) is characterized by exceptionally high content of alkylphthalides. The mentioned compounds exhibit a number of biological effects (including hypotensive, lipid-lowering, neuroprotective, and cytotoxic) and are also responsible for distinctive aroma of the plant. In the current work, parameters of conventional hydrodistillation (HD) and simultaneous distillation-extraction (SDE) were optimized to obtain phthalide-enriched fractions of celery seeds. A positive correlation was shown between hydrodistillation time and improved essential oil and phthalide yields. The 6-h HD of comminuted seeds yielded essential oil (2.9%) with a higher total phthalide content (51%), as compared to the samples collected after 1.5-3.0 h, which gave 2.4-2.7% of oil containing 24.6-39.2% of total phthalides. The oil contained sedanenolide (36.7%), 3-n-butylphthalide (13.1%), and sedanolide (1.1%). A further increase in the total phthalide content was achieved by omitting the size reduction step prior to hydrodistillation (68.8%) and utilization of the salting-out effect (84.3%). Enzyme pretreatment had a negligible effect on essential oil and phthalide yields. The change of distillation mode from HD to SDE significantly increased the oil yield of whole seeds (from 2.8 to 5.8% for 6 h processing) while maintaining its high phthalide content (62.5%), which translated to an increase in the total phthalide yield from 19.4 to 36.0 g/kg.
Źródło:
Polish Journal of Food and Nutrition Sciences; 2021, 71, 2; 197-210
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The short-term effects of crude oil on the survival of different size-classes of cladoceran Daphnia magna (Straus, 1820)
Autorzy:
Lennuk, L.
Kotta, J.
Taits, K.
Teeveer, K.
Powiązania:
https://bibliotekanauki.pl/articles/47987.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
crude oil
short-term effect
pollution
Daphnia magna
size class
survival rate
aquatic environment
Źródło:
Oceanologia; 2015, 57, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Paper profits from value, size and momentum: evidence from the Polish market
Autorzy:
Zaremba, Adam
Konieczka, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/599578.pdf
Data publikacji:
2015
Wydawca:
Wyższa Szkoła Informatyki i Zarządzania z siedzibą w Rzeszowie
Tematy:
value premium
size premium
momentum effect
cross-section of stock returns liquidity
transaction costs
Warsaw Stock Exchange
WSE
Polish stock market
Opis:
In this paper we investigate sources and characteristics of value, size and momentum profits on the Polish stock market. The research aims to broaden the academic knowledge in a few ways. First, we deliver fresh out-of-sample evidence on value, momentum, and size premiums. Second, we analyzemthe interdependences among the factors. Third, we investigate whether the factor premiums are present after accounting for liquidity constraints. Fourth, we check whether the factor premiums are robust to transaction costs. Our research is based on all the stocks listed on the WSE in years 2001-2013. We find, that the value, momentum, and size premiums are to some extent present on the Polish market. Furthermore, they strengthen each other, but they disappear after accounting for transaction costs and liquidity.
Źródło:
Finansowy Kwartalnik Internetowy e-Finanse; 2015, 11, 3; 58-69
1734-039X
Pojawia się w:
Finansowy Kwartalnik Internetowy e-Finanse
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of nano-SiO2 particle size distribution on rheological behaviour of shear thickening fluids
Wpływ rozkładu wielkości ziarna cząstek nano-SiO2 na właściwości reologiczne cieczy zagęszczanych ścinaniem
Autorzy:
Idźkowska, A.
Szafran, M.
Powiązania:
https://bibliotekanauki.pl/articles/351454.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
shear thickening fluids
nanosilica
particle size distribution
dilatant effect
polypropylene glycol
ciecze zagęszczane ścinaniem
nanokrzemionka
rozkład wielkości cząstek
glikol polipropylenowy
efekt dylatacyjny
Opis:
In present work the influence of particle size distribution on the dilatant effect of shear thickening fluid was investigated. As a ceramic powder a mixture of silicas 200 and 7 nm in ratio 95:5, 90:10, 85:15, 80:20, 75:25, 50:50 was used. A dispersing agent was poly (propylene glycol) of a molecular weight of 425 g/mol. The as prepared slurries were examined on a rotational rheometer Kinexus Pro with a plate-plate measuring system at room temperature, where the viscosity as a function of shear rate was investigated. The measurement showed that by partially replacing greater particle size by smaller one, it is possible to shift the onset of shear thickening to the higher value of shear rate, however, the decreases of dilatant effect is observed. The influence of particle size distribution on a maximum volume fraction also was investigated. The maximum volume fraction which was passible to obtain was 35 vol%.
W niniejszej pracy przedstawiono wyniki badań dotyczące wpływu rozkładu wielkości ziarna na właściwości zagęszczania ścinaniem. Fazę stałą stanowiła mieszanina nanokrzemionki o średnich wielkościach ziarna 7 i 200 nm, gdzie stosunek nanokrzemionki 200 nm do nanokrzemionki 7 nm wynosił odpowiednio 95:5. 90:10, 85:15, 80:20, 75:25 i 50:50. Jako ciecz dyspergującą zastosowano glikol polipropylenowy o masie molowej 425 g/mol. Badania reologiczne lepkości w funkcji wzrastającej szybkości ścinania wykonano za pomocą reometru rotacyjnego Kinexus Pro w układzie płytka-płytka. Szybkość ścinania zmieniała się od 1 do 1000 s-1 . Wyniki przeprowadzonych badań pokazały, że poprzez częściowe zastąpienie nanokrzemionki 200 nm nanokrzemionką 7 nm możliwe jest przesunięcie początku zagęszczania ścinaniem w stronę wyższych szybkości ścinania, jednakże skok dylatancyjny obniża się. W ramach pracy zbadano również wpływ rozkładu wielkości ziarna na maksymalne stężenie fazy stałej. Maksymalne stężenie fazy stałej wyniosło 35%obj.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 4; 1323-1326
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inventory management in a manufacturing-remanufacturing system with cannibalization and stochastic returns
Zarządzanie zapasem w systemie produkcyjnym przy występowaniu kanibalizacji i zwrotów stochastycznych
Autorzy:
Okuda, A.
Ishigaki, A.
Yamada, T.
Gupta, S. M.
Powiązania:
https://bibliotekanauki.pl/articles/361798.pdf
Data publikacji:
2018
Wydawca:
Wyższa Szkoła Logistyki
Tematy:
supply chain management
economic efficiency
product recovery
market size
cannibalization effect
zarządzanie łańcuchem dostaw
efektywność ekonomiczna
odzyskiwanie produktu
wielkość rynku
efekt kanibalizacji
Opis:
Background: The design of a remanufacturing system that recovers sold products for reprocessing is needed to meet Japan's environmental objectives. However, to establish closed-loop supply chains for sustainability, it is necessary to consider not only environmental factors but also economic efficiency. Selling remanufactured products at prices lower than new products, may expand market sizes and allow a firm to accrue higher profits. However, a cannibalization effect will occur in which consumers who would have purchased new products, instead purchase remanufactured products at lower prices. The purpose of this study is to design a manufacturing-remanufacturing system in consideration of the cannibalization effect. Furthermore, we evaluate the system including cycle of a product by using the use period of products. Methods: Based on a previous study, we develop a demand model with cannibalization effect using the Bass model. We deal with the demand affected by the different prices of products by introducing a demand function that increases as the price of products decreases. Moreover, by giving the use period of each product, we consider the case that the recovery period of each product is different. Results: In numerical examples, a manufacturing-remanufacturing system using the proposed model is evaluated. The numerical results clarify the influence of the price of remanufactured products, cannibalization rate, and introduction timing of remanufactured products on total profit and remanufacturing rate of our system. Conclusions: This manufacturing-remanufacturing system revealed the influence of cannibalization effect on total profit and the importance of price and the timing of introduction of remanufactured products. In addition, by using the use period of each product, fluctuation in the quantity of reusable products can also be taken into consideration. It is shown that it is necessary to sell remanufactured products according to product recovery.
Wstęp: System produkcyjny odzyskiwania zużytego sprzętu jest bardzo pożądany z punktu widzenia ochrony środowiska. Aby jednak stworzyć ten system w pełni zrównoważony, należy wziąć pod uwagę nie tylko aspekty ekologiczne ale także ekonomiczne. Przy sprzedaży używanych produktów w cenach niższych aniżeli wyroby nowe, wielkość rynku zbytu może ulec zwiększeniu a firmy są w stanie osiągnąć wyższe zyski. Jednak istnieje niebezpieczeństwo pojawienia się efektu kanibalizacji, czyli zjawiska nabywania przez klientów produktów używanych zamiast nowych. Celem pracy było opracowanie modelu produkcyjnego uwzględniającego tej efekty jak również cykl życia produktu. Metody: W oparciu o wcześniejsze został opracowany model popytu uwzględniający efekt kanibalizacji przy użyciu modela Bassa. Określenie popytu w zależności od ceny produktu następowało poprzez zastosowanie funkcji popytu rosnącej przy malejącej cenie produktu. Równolegle, przypisując odpowiedni okres każdemu produktowi, uwzględniono różny czas odtworzenia, specyficzny dla każdego z produktów. Wyniki: Zaproponowany model został przedstawiony w przykładach numerycznych. Ich wyniki wskazują na wpływ ceny odzyskanych produktów, wskaźnik kanibalizacja oraz okresu odtworzeniowego na całkowity zysk uzyskany w opracowanym modelu. Wnioski: Zaproponowano produkcyjny model odzysku zużytego sprzętu uwzględniający efekt kanibalizacji przy użyciu modelu popytu ze zmienną niezależną w postaci ceny produktu. Wykryto efekt kanibalizacji na całkowity zysk oraz istotność ceny i okresu odtworzenia zużytych produktów. Dodatkowo, poprzez zróżnicowanie okresu odtworzenia dla różnych produktów wykazano potrzebę sprzedaży odzyskiwanych produktów.
Źródło:
LogForum; 2018, 14, 1; 113-125
1734-459X
Pojawia się w:
LogForum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of rootstock on yield quantity and quality of grapevine ‘Regent’ in South-Eastern Poland
Autorzy:
Kapłan, M.
Klimek, K.
Borowy, A.
Najda, A.
Powiązania:
https://bibliotekanauki.pl/articles/11858689.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
South-Eastern Poland
plant cultivation
grapevine
grape
Regent cultivar
fruit
fruit quality
fruit size
rootstock effect
yield quantity
yield quality
plant research
Opis:
Globally, the application of rootstocks for grapevine cultivation has been a standard, while in the northern regions, like in Poland where the viticulture tradition is relatively short, the selection of the most suitable rootstock types requires multi-year observation and research. The objective of the present study was to assess the effect of six following rootstock types: ‘101-14 Mgt’, ‘161-49C’, ‘125AA’, ‘5BB’, ‘SO4’, ‘SORI’, and own-rooted vines on yield quantity and quality of ‘Regent’ grapevine in south-eastern Poland. The three-year research period indicates that the vines on ‘125AA’ tended to produce not only the highest yields but had positive influence on the number and weight of clusters and berry weight as well. Whereas the vines grafted onto ‘161-49C’ gave the lowest yields and had the smallest number of clusters per vine. The fruit extract content in ‘Regent’ grapes on ‘101-14 Mgt’ rootstock was found to be significantly lowest among those under study. The extract content and yield of grapevines evaluated in the own-rooted vines and those grafted to the rootstocks which formed one group, did not differ.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2018, 17, 4; 117-127
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The issue of bullwhip-effect evaluating in supply chain management
Ocena efektu byczego bicza w zarządzaniu łańcuchem dostaw
Autorzy:
Vokhmyanina, A.
Zhuravskaya, M.
Osmólski, W.
Powiązania:
https://bibliotekanauki.pl/articles/361860.pdf
Data publikacji:
2018
Wydawca:
Wyższa Szkoła Logistyki
Tematy:
supply chain
uncertainty
bullwhip effect
variation in order sizes
regression coefficient
t-statistics
order size dynamics
łańcuch dostaw
niepewność
efekt byczego bicza
zmiany wielkości zamówienia
współczynnik regresji
statystyka t
wielkość dynamiczna partii
Opis:
Background: This article deals with the quantitative evaluation of the bullwhip effect in supply chains. A literature review was carried out and it was revealed that there is no general approach to quantifying the bullwhip effect. In the article, a more precise concept of the bullwhip effect is proposed from the point of view of the naturalscientific approach. Methods: A methodology for quantifying the bullwhip effect as a coefficient of linear regression was developed, characterising the dependence on the location of a link in supply chains, which can be used to adjust its operational work. Results: The stability of the proposed model is confirmed by the results of its implementation in production in several sectors of the economy, distinguished by the number of units and number of study periods, which demonstrates its potential for use in the distribution system. Conclusions: The main reason for the existence of the bullwhip effect is the unreliability of forecasts, which ultimately reduces the efficiency of inventory planning in supply chains and extensive logistics systems. Reducing the negative impact of the bullwhip effect can be achieved by using more advanced forecasting models and the quantitative assessment method used in this study, to adjust reserve stocks in supply chain links.
Wstęp: W pracy zostały postawione pytania dotyczące przeprowadzania oceny ilościowe efektu byczego bicza występującego w obrębie łańcucha dostaw. Wykonano przeglądu literatury, na podstawie którego stwierdzono, że nie ma jednorodnego podejścia do ujęcia ilościowego efektu byczego bicza. W związku z tym, zaproponowano bardziej precyzyjne podejście do tego efektu. Metody: W celu oceny ilościowej efektu byczego bicza stworzono metodę współczynnika regresji liniowej, charakteryzującą się zależnością między lokalizacjami ogniw w łańcuchu dostaw i która może być użyta do poprawy jego działania operacyjnego. Wyniki: Stabilność proponowanych modeli jest potwierdzona w postaci wyników ich wdrożenia do produkcji w różnych obszarach gospodarczych, różniących się liczbą jednostek oraz liczbą okresów poddanych badaniu, które dowodzą możliwości ich użycia w praktycznych działaniach firmy w obrębie systemu dystrybucyjnego. Wnioski: Głównym powodem występowania efektu byczego bicza jest brak trafności estymacji, która to wpływa na obniżenie efektywności zarządzania zapasem w obrębie łańcucha dostaw oraz dużych systemów logistycznych. Redukcję negatywnego wpływu efektu byczego bicza można osiągnąć przez zastosowanie bardziej zaawansowanych metod prognostycznych oraz metody oceny ilościowej, użytej w tej pracy w celu bardziej optymalnego zarządzania zapasami w obrębie łańcucha dostaw.
Źródło:
LogForum; 2018, 14, 2; 163-170
1734-459X
Pojawia się w:
LogForum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
MIĘDZYRYNKOWE PREMIE ZA WARTOŚĆ, WIELKOŚĆ I MOMENTUM NA GIEŁDACH AKCJI
INTER-COUNTRY VALUE, SIZE AND MOMENTUM PREMIUMS ACROSS THE STOCK MARKETS
Autorzy:
Zaremba, Adam
Konieczka, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/453307.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
premia za wartość
premia za wielkość
efekt momentum
analiza przekrojowa stóp zwrotu
międzynarodowe rynki finansowe
efekt wartości księgowej do rynkowej
efekt małej spółki
value premium
size premium
momentum effect
cross-section of stock returns
international financial markets
Opis:
Niniejszy artykuł koncentruje się na charakterystykach międzyrynkowych premii za wartość, wielkość i momentum na giełdach akcji. Przeprowadzone badanie poszerza stan wiedzy naukowej na dwa sposoby. Po pierwsze, dokumentuje funkcjonowanie efektów wskaźnika wartości księgowej do rynkowej, kapitalizacji i momentum na poziomie państw. Po drugie, wykazuje, że opisane efekty wzmacniają się nawzajem pozwalając budować portfele cechujące się ponadprzeciętnymi stopami zwrotu. Obliczenia bazują na notowaniach spółek z 66 państw w latach 2000-2013.
The study examines the characteristics of inter-country value, size and momentum premiums. We contribute to the asset-pricing literature in two ways. First, we deliver evidence on value, size and momentum premiums across countries. Second, we demonstrate, that the country-level value, size and momentum premiums tend to strengthen each other in double-sorted portfolios. We investigate stock markets in 66 countries 2000 and 2013.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2014, 15, 4; 246-255
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-38 z 38

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies