Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "size effect" wg kryterium: Temat


Tytuł:
Size effect at testing strength properties of concrete
Autorzy:
Akram, Amanda
Powiązania:
https://bibliotekanauki.pl/articles/1955920.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
concrete
size effect
tensile strength
Opis:
Various strength characteristics of concrete are considered as fracture parameters. The compressive strength of concrete is of paramount importance when designing concrete structures, whereas tensile strength of concrete is the basic property when estimating cracking resistance of a structure and analysing fracture processes in concrete. When testing the compressive strength of concrete, the results are dependent on the shape and dimensions of used specimens. Some findings reported in the literature suggest that size effect exists also when testing such fracture properties of concrete as tensile strength. Unfortunately this problem is much less recognized and described compared to size effect in compressive test results. In this paper, the experimental investigation is presented on how the length of cylindrical specimens influences the tensile splitting strength of concrete obtained by means of the Brazilian method. Additional variable parameters were: type of aggregate (natural gravel and crushed granite) and cement-water ratio (C/W = 1.8 and C/W = 2.6). In conducted laboratory experiments a higher splitting tensile strength of concrete was noted for all specimens with nominal dimensions of 150×150 mm, compared to specimens 150×300 mm in size, regardless of type of aggregate or cement-water ratio.
Źródło:
Budownictwo i Architektura; 2021, 20, 4; 37-45
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Importance of the Size of Local Government in Avoiding the Fiscal Distress - Empirical Evidence on Communes in Poland
Autorzy:
Galiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/16729115.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
fiscal distress
local government
size effect
Opis:
Theoretical background: In the literature on finance there are findings which examine reasons for the fiscal distress of units of the public sector, including local governments. However, this distress might be differently defined. Therefore, it determines both the approach to identify this phenomenon and the types of explanatory variables. Nevertheless, in the field of the business sector in the econometric models concerning the financial distress the size of the unit is considered. In this case there are also some possibilities to apply the correct proxy variable. This results from the fact that the size of local government might determine its fiscal capability as well as the level and structure of expenditures, which affect fiscal distress. Purpose of the article: The aim of this paper is to examine the influence of the size of the local government on the probability of the decrease of the exposure to the fiscal distress. Research methods: The author reviewed the literature in the field of the fiscal distress and introduced a multi-criteria decision analysis as well as a logistic regression modelling to examine this. The research procedure also required the use of the linear ordering to construct the dependent variable of the fiscal distress in order to analyse the “size effect” on the fiscal distress. Main findings: Fiscal distress of local governments is a core issue, which should be constantly analysed. It depends on the financial, economic, social and even political aspects. To identify exposure to this distress the TOPSIS method can be used. However, the fiscal distress can be affected by the size of the unit, which influences lots of budgetary categories. Due to the specificity of dependent and independent variables in the econometric models the “size effect” might be represented through the level of the population or the assets. Using the ordinal logistic regression in the research, the authors should consider that this effect can differ between the units with the disparate exposure. So, the partial proportional odds models can be required. Thus, the growth of the size of the unit, measured by the population, increases the odds of reaching very low exposure to fiscal distress. Simultaneously, there are some other important issues which should be included in this type of research.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska, sectio H – Oeconomia; 2022, 56, 5; 101-113
0459-9586
2449-8513
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska, sectio H – Oeconomia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ubiquitiformal fracture energy
Autorzy:
Ou, Z.-C.
Yang, M.
Li, G.-Y.
Duan, Z.-P.
Huang, F-L.
Powiązania:
https://bibliotekanauki.pl/articles/280189.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
fractal
ubiquitiform
fracture energy
size effect
Opis:
The ubiquitiformal fracture energy is proposed in the paper and its explicit expression is obtained. Moreover, the numerical results for concrete are found to be in good agreement with those for the critical strain energy release rate. The discrepancy between the numerical results of the traditional fracture energy and the critical strain energy release rate can be explained reasonably, which implies that the ubiquitiformal fracture energy should be taken as an available fracture parameter of materials. Finally, it is numerically found for some concrete that there is not size effect for the ubiquitiformal fracture energy.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 3; 1101-1108
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inner Size Effect in Layered Films with Eutectic Interaction of Components
Autorzy:
Dukarov, S.
Petrushenko, S.
Sukhov, V.
Churilov, I.
Samsonik, A.
Skryl, O.
Powiązania:
https://bibliotekanauki.pl/articles/1030004.pdf
Data publikacji:
2018-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
inner size effect
multilayer films
interfacial energy
Opis:
The results of the study of melting of Bi-Sn and Pb-Sn polycrystalline layered film systems with the thickness of 200-400 nm on a substrate with temperature gradient are given. Multilayer (each layer is of 10-20 nm) and bilayer films (layers are of 100-200 nm) of the same total thickness have been investigated. Broadening of the melting range in all films and lowering of melting point in multilayer samples compared to the bilayer ones have been observed. The observed phenomena are discussed within existing thermodynamic concepts in consideration of interfacial energy of contacting layers of components and energy of grain boundaries in polycrystalline films.
Źródło:
Acta Physica Polonica A; 2018, 133, 5; 1186-1190
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On some problems in determining tensile parameters of concrete model from size effect tests
Autorzy:
Marzec, Ireneusz
Bobiński, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/260481.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
concrete
size effect
fracture energy
elasto-plasticity
XFEM
Opis:
The paper presents results of numerical simulations of size effect phenomenon in concrete specimens. The behaviour of in-plane geometrically similar notched and unnotched beams under three-point bending is investigated. In total 18 beams are analysed. Concrete beams of four different sizes and five different notch to depth ratios are simulated. Two methods are applied to describe cracks. First, an elasto-plastic constitutive law with a Rankine criterion and an associated flow rule is defined. In order to obtain mesh independent results, an integral non-local theory is used as a regularisation method in the softening regime. Alternatively, cracks are described in a discrete way within Extended Finite Element Method (XFEM). Two softening relationships in the softening regime are studied: a bilinear and an exponential curve. Obtained numerical results are compared with experimental outcomes recently reported in literature. Calculated maximum forces (nominal strengths) are quantitatively verified against experimental values, but the force – displacement curves are also examined. It is shown that both approaches give results consistent with experiments. Moreover, both softening curves with different initial fracture energies can produce similar force-displacement curves.
Źródło:
Polish Maritime Research; 2019, 2; 115-125
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of dynamic growth of a micro-scaled void based on strain gradient elasto-plasticity
Autorzy:
Ma, Xinbing
Liu, Jinxing
Wang, Jiadong
Pan, Hao
Powiązania:
https://bibliotekanauki.pl/articles/1839598.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
dynamic void growth
size effect
inertia
thermal softening
Opis:
Void initiation and growth serve as an important mechanism in ductile failures in metals. Particularly, on the micron-level, the extra hardening effect associated with strain gradient is accounted for by adopting strain gradient elasto-plasticity instead of the conventional plasticity. Effects of inertial, strain gradient hardening and thermal softening are formulated analytically for the case where a spherical void expands under external hydrostatic stress. As demonstrated by our results, the inertia effect firstly tends to hinder but then promotes the void growth. The threshold stress required for rapid void growth is lifted due to extra hardening of strain gradient so that the growth of a smaller void is delayed more remarkably. A considerable thermal softening phenomenon is observed here, which is caused by plastic work during the deformation process. The final void growth rate is mainly related to the maximum loading, which is consistent with the prediction based on the classical plastic theory.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 4; 927-941
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of particle size and feed rate on coal cleaning in a dry separator
Autorzy:
Kademli, M.
Gulsoy, O. Y.
Powiązania:
https://bibliotekanauki.pl/articles/110339.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dry coal cleaning
particle size effect
air separator
Opis:
This research is concerned with the effects of particle size distribution and feed rate of feed on the coal cleaning performance of table type air separator. In tests, the lignite and hard coal samples from Mugla and Zonguldak districts in Turkey were used. The samples were tested in three different size distributions such as –38 + 6 mm, –19 + 6 mm and –9.5 + 6 mm. The effect of particle size was investigated together with the feed rate 2 Mg/(hm2), 1.68 Mg/(hm2) and 1.32 Mg/(hm2) and very important physical parameters of table type air separator such as, riffle height, table slope and table frequency. Results were analyzed by using the Tromp curve for indicating the effects in detail. Consequently, the results revealed that the particle size had remarkable effect on separation efficiency. The separation efficiency was, however, inversely affected as the particle size distribution became finer, and the best results were obtained in particle size distribution was –38 + 25 mm in both sample tested. The Ep value was 0.11 for the hard coal samples while it was 0.13 for the lignite samples.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 204-213
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of pre-tension on torsion of microscale Cu wires: a study via strain gradient theory
Autorzy:
Ma, Xinbing
Liu, Jinxing
Powiązania:
https://bibliotekanauki.pl/articles/280360.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
nonproportional loading
strain gradient plasticity
size effect
cyclic response
Opis:
Nonproportional plastic deformations on the microscale are an emerging topic. A simplified theory of strain gradient elasto-plasticity is developed to study the evolution of yield strength in a copper wire sequentially experiencing tension and torsion. The pre-tension deformation and stress are inherited to the upcoming torsion process, resulting in a nonproportional loading condition. With consideration of the extra hardening effect due to strain gradient, pre-tension weakens the extra hardening effect of the strain gradient and the dependence on the wire radius. Cyclic torsion behavior is also investigated. Anomalous Bauschinger effect and plastic softening are found.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 4; 1055-1065
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue life prediction of aluminium profiles for mechanical engineering
Autorzy:
Tomaszewski, T.
Sempruch, J.
Powiązania:
https://bibliotekanauki.pl/articles/281070.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
aluminium profile
high-cycles fatigue
mini specimen
size effect
Opis:
The study presents a method to determine the σa − N curve (high cycle fatigue) for profiles made of AW-6063 T6 aluminium alloy. Experimental material data for a mini specimen taken directly from the tested item and selected empirical correlations allowing for a size effect have been used. A model yielding the lowest relative error of estimating the fatigue life is presented.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 2; 497-507
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on optimization method of flotation kinetic model based on molybdenite particle size effect
Autorzy:
Wan, He
An, Yanni
Qu, Juanping
Zhang, Chonghui
Xue, Jiwei
Wang, Sen
Bu, Xianzhong
Powiązania:
https://bibliotekanauki.pl/articles/24085892.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
particle size effect
molybdenite
mathematical model
method of correction
Opis:
Flotation kinetic models can be applied to describe the flotation process and to predict mineral recoveries. However, the size composition of the target minerals in the feed ore fluctuates considerably, resulting in insufficient accuracy with flotation kinetic models. There have been many studies that focus on the investigation of flotation kinetics with different particle sizes, while the optimization methods for flotation kinetic models based on particle size effects have not been reported. In this paper, flotation tests, optical microscope observations, and particle size analysis were used to identify the reasons for the decrease in accuracy of the flotation kinetic model due to changes in the composition of molybdenite particle size. Additionally, an optimization method for the flotation kinetic model was developed based on the particle size effect. The test results show that the accuracy of the flotation kinetic model for fixed particle size minerals is very high, but the predicted results for flotation recoveries of different particle size mineral mixtures have large deviations. The poor accuracy might be due to the autogenous carrier effect caused by the particle size composition fluctuating considerably. The optimization method for the flotation kinetic model is based on the particle size effect. The model can accurately describe the flotation process of molybdenite with different size compositions of molybdenite and predict the flotation recovery of molybdenite.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 2; art. no. 163004
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
2D Lattice Model for Fracture in Brittle Materials
Autorzy:
Kozicki, J.
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/241484.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
beam
brittle material
discrete method
fracture
lattice model
size effect
Opis:
The numerical simulations show the potential of a lattice discrete approach to model fracture during brittle materials in different two-dimensional quasi-static processes of loading behaviour. The 2D calculations were carried out for brittle specimens subject to uniaxial compression, uniaxial extension and shear. The effect of the specimen size on the global stress-strain diagram during uniaxial tension was also investigated. The advantages and disadvantages of the model were outlined.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2006, 53, 2; 137-154
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some Physical Properties of Copper Oxide Thin Films Prepared by Electrolysis Method
Autorzy:
Oudah, Mustafa H.
Mazin, H. Hasan
Abd, Ahmed N.
Powiązania:
https://bibliotekanauki.pl/articles/1065248.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
copper oxide
drop-casting method
electrolysis
quantum size effect
thin films
Opis:
The aim of this paper is to study the properties of copper oxide thin films prepared by electrolysis method and deposited on glass substrates by drop-casting method at different annealing temperatures. Copper oxide colloidal was successfully prepared by electrolysis method. The X-ray diffraction confirms the polycrystalline structure of the films. Atomic force microscopy shows that the increase in the annealing temperature improves the surface morphology, increases the grain size and removes the cracks. The best optical transmittance was for the film annealed at 200 ºC. The bandgap decreases from 3.35 eV to 3.15 eV as a result of increasing the annealing temperature. The wide bandgap that obtained in this study is due to quantum size effect.
Źródło:
World Scientific News; 2019, 135; 59-70
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dependence of creep failure probability on the size of metallic specimens
Autorzy:
Nowak, K.
Powiązania:
https://bibliotekanauki.pl/articles/387437.pdf
Data publikacji:
2013
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
size effect
creep damage
cellular automata
efekt rozmiarowy
zniszczenie przy pełzaniu
pełzanie
Opis:
The occurrence of statistical size effect is considered for damage in creep conditions. The numerical and experimental analysis have been performed. The obtained results are ambiguous. Numerical models confirm the scale effect which can be statistical or deterministic one. But this effect has no experimental verification. It may suggest that the weakest link model cannot be applied in creep conditions. Explanation of this needs further investigations.
Źródło:
Acta Mechanica et Automatica; 2013, 7, 3; 166-169
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental tool for micro-extrusion of metals
Autorzy:
Piwnik, J.
Mogielnicki, K.
Gabrylewski, M.
Baranowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/381943.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
microforming
microextrusion
size effect
experimental tool
mikroformowanie
mikrowyciskanie
efekt skali
narzędzie doświadczalne
Opis:
In paper the technological tools requirements, used for micro-extrusion of metals in cold and warm conditions are presented. The constructive principles for the micro-tools are also described. The influence of the size effect in a workpiece and a tool top layers roughness form on extrusion processes in microscale are showed. The tool, designed to an experimental verification of the size effect influence, in a tool roughness form, on the metal rod forward extrusion are presented. This tool is made in the form of two halves, joined together by the pegs and screws. It has bored two dies profiles with the same dimensions, the only difference is a degree of the containers roughness. That solution gives a possibility to specify the influence of the tool roughness degree on the extrusion forces, deformation process and a product quality. Described tool was designed in such a way to manufacture it with using conventional machining equipment.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 195-198
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the size effect of auxetic cellular materials
Autorzy:
Janus-Michalska, M.
Powiązania:
https://bibliotekanauki.pl/articles/265410.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
negative Poissons ratio
auxetic structures
size effect
właściwości sprężyste
próba ścinania
kompresja
Opis:
The objective of this paper is to investigate the effects of scale of an auxetic cellular material sample on the evaluation of elastic properties. Size and boundary effects are studied in detail. This is achieved by conducting computer simulations of the auxetic structure under the typical loading exerted by the compression and simple shearing test performed by means of ABAQUS FEA. The material microstructure is discretized by the plane network of Timoshenko beam elements. The results of the studies give insight to the scale effects. Structures with designed properties can be potentially used for engineering applications.
Źródło:
International Journal of Applied Mechanics and Engineering; 2017, 22, 3; 749-757
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies