Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ships" wg kryterium: Temat


Tytuł:
Modern numerical techniques for the ships safety estimation in critical conditions
Autorzy:
Gerigk, M.
Powiązania:
https://bibliotekanauki.pl/articles/1954534.pdf
Data publikacji:
1999
Wydawca:
Politechnika Gdańska
Tematy:
design of ships
ships hydromechanics
safety of ships
design of safety
Opis:
In this paper a method for a ship safety estimation at the preliminary stage of design is briefly presented. Solving a few hydrostatic and dynamical problems may be taken into account using the method with special regards to the ships safety estimation in critical conditions. The critical conditions may concem the problems of survivability caused due to the cargo and/or ballast shift, waves and wind impact including the ingress of external water into the watertight compartments of a ship. The theoretical and computational models are briefly described. Using the computational model the safety assessment may be done for the initial event and scenario development assumed. Then, either some seakeeping, stability, damage stability or survivability related characteristics should be evaluated for the risk assessment. Both the seakeeping and stability characteristics are treated as the initial conditions for the risk assessment regarding the damage stability and survivability, and it usually follows from the hazard scenario development. The risk assessment is the base for the safety estimation. This is done according to the IMO regulations. The computational model incorporates the modern numerical techniques and is briefly described by introducing the logical structure of design system, logical structure of computational model and a few application methods used. The model enables to estimate the safety combining the influence of the hull form parameters, arrangement of internal spaces, loading condition including both the cargo distribution and permeability and impact of exciting forces. The exciting forces may follow from both the external and internal sources. And they are as follows: waves, wind and cargo and ballast shift.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 1999, 3, 2; 201-225
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cruise Ships Routing in Central Part of the Adriatic East Coast
Autorzy:
Dorigatti, J.
Lušić, Z.
Perić, T.
Jelić Mrčelić, G.
Powiązania:
https://bibliotekanauki.pl/articles/2172466.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Adriatic Sea
eastern Adriatic
cruise ships
ships routing
cruise ships traffic
ships traffic
Safety at Sea
Opis:
Strong expansion of cruise ships traffic and cruising destinations in the Adriatic makes the region ideal for cruise ships routing analysis. The aim of this paper is to detect real cruise ships traffic movement in order to understand how present cruise ships routes are navigationally and environmentally sustainable and safe. Cruise ships characteristic operational demand and navigational routine in relation with regions indented coast line with high level of environmentally preserved areas in landscape of high national value, emphasise importance of real cruise ships routing awareness. The research is based on one year cruise ships traffic monitoring and routes analysis in the Central Adriatic East coast. The results offer detail insight of cruise ships navigational routines in navigationally less defined area that has not been frequent cruising region before. Cruise ships routes comparison is carried out between North Adriatic region, which is well defined with traffic separation schemes and navigational aids and less defined Central and South Adriatic regions. The results show that principle of cruise ships routing differ from standard maritime practice and that operational demand for attractive cruising and passenger experience bring cruise ships close to shores in various demanding navigational situations. That routing practice does not meet criteria of sustainability as it often present high navigational, safety and environmental risk.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2022, 16, 1; 161--166
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A design concept of ecological tourist – passenger ship intended for Berlin-Królewiec (Kaliningrad) inland waterway service
Autorzy:
Hołówko, W.
Michalski, J. P.
Rosochowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/260504.pdf
Data publikacji:
2006
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ship designing
inland waterways ships
passenger ships
Opis:
This paper presents a design concept of a novel passenger segment ship intended for navigating on Berlin- -Królewiec (Kaliningrad) inland waterway route, characteristic of application novel structural materials and engineering processes which make it possible to design structures in an innovative way and provide high operational merits for inland waterways ship. Conceptual, functional and technical assumptions for the designed ship as well as its service program was described. Exceptional features of the designed ship are : the general architectural concept which makes the ship free passing under small-clearance bridges and navigating in narrow and shallow waterways, possible, manufacturing technology of its hull structure made of „sandwich” panels as well as its combustion-electric engine (or combustion-hydraulic engine) propulsion system working on alternative ecological gas fuels.
Źródło:
Polish Maritime Research; 2006, S 2; 5-9
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reducing a human factor in cruise ships accidents by Improving crew competences
Autorzy:
Gundić, A.
Vujičić, S.
Maglić, L.
Grbić, L.
Powiązania:
https://bibliotekanauki.pl/articles/1841488.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
cruise and passanger ships
human factor
cruise ships
ships accidente
cruise ships accidents
improving crew competences
crew competences
STCW Convention
Opis:
In recent decades, there has been noticed a continuous growth of passengers on cruise ships. Technical as well as technological development follow this growth side to side as far as construction, transport of passengers and strict legal regulations are concerned. However, recent maritime accidents, such as the Costa Concordia’s accident, question the level of maritime safety on cruise ships. Maritime accidents on cruise ships are almost entirely linked to human factor, directly or indirectly. Apart from the parameters affecting human factor, the literature mentions very frequently the importance of education, training and crew competences in the process of reducing the number of maritime accidents. However, very few researches have been done on competences that can affect strongly the level of maritime safety on cruise ships, i.e., that can reduce the effects of human factor on it. The purpose of this study was to find a connection between reducing the effects of human factor on accidents and the crew competences on cruise ships. The research lasted for two years and consisted of two phases. Qualitative as well as quantitative methods of analysis were used in both phases. Competences that are the essential part of obligatory programmes the crew members on cruise ships have to master, and that are prescribed by the STCW Convention were analysed in the first part of the research. The second part of the research analysed competences that are essential part of programmes resulting from the cruise companies’ demands. Cruise companies have defined and determined additional programmes and competences that seafarers, navigating on their ships, have to complete and develop. The aim of the research was to determine what type of competences the cruise companies look for through additional education programmes and to determine the amount of time needed to develop them.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2021, 15, 2; 415-421
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application possibilities of electric driven propulsion of multi-mode ships
Autorzy:
Herdzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/246217.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ships propulsion
electric propulsion
multi-mode ships
propulsion systems
Opis:
The ship propulsion solution based on unconventional thrusters driven by electric motors is most often applied for the multi-mode ships. These ships ought to have dynamic positioning system. It forces an application of a few thrusters (most often four, seldom more up to eight). Records from a number of multi-mode ships show amean load of less than 40% of maximum load on the propulsion system. In other side the demand for electric energy of ship industrial part is large, more often than for the propulsion part. In that case the diesel-electric propulsion system application may be economical, because the electric energy generation for all ship's purposes makes possible the main engines work on the optimum loads on lowest specific fuel consumption and allows them a long-term work on heavy fuels. For multi-mode ships like cable ships, suppliers, drilling vessels are convenient an application of unconventional thrusters with direct electric propulsion as well, especially for dynamic positioning systems. The efficiency of the thrusters is a predominant factor for the successful and economical operation. Forecasted development and rise of quantity of diesel-electric propulsion (it means with electrical transmission) would cause increased interest of unconventional thrusters. Ultimately they may revolutionize ship propulsion systems.
Źródło:
Journal of KONES; 2010, 17, 1; 163-168
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of propulsion arrangement choice of multi-mode ship
Autorzy:
Herdzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/246914.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ships propulsion
propulsion arrangement
multi-mode ships
propulsion choice
Opis:
The propulsion system of multi-mode ships cause many problems of proper the choise of propulsion system elements and theirs arrangement in the design process. This system has to fulfil at least two inverse demands. It ought to make possible efficient ship shift (transit mode) from the port to the off shore work place and return to base, to ensure a ship survive at sea in the worst sea condition possible on that sea area and to fulfil conditions of dynamic positioning accuracy (stationkeeping mode) at specified bad state of the sea - not to stop the ship work for long time. The dynamic positioning systems require multi-element ship propulsion application. The fulfilment, all required possibilities and accuracy of ship positioning by chosen propulsion system specified in the project data, is the most important project problem to obtain the minimum investment costs. The redimensioning of propulsion system, increasing the number of thrusters and theirs possibilities gives the benefits in dynamic positioning accuracy, but increases the investment costs. An expensive project may not be realized because of price. The aim of designer is the choice optimum solution of propulsion system, which is fulfils all expectations of ship owner and crew, and performs all project assumptions.
Źródło:
Journal of KONES; 2010, 17, 2; 129-135
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application possibilities of electric driven propulsion of multi-mode ships
Autorzy:
Herdzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/247580.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ships propulsion
electric propulsion
multi-mode ships
propulsion systems
Opis:
The ship propulsion solution based on unconventional thrusters driven by electric motor s is most often applied for the multi-mode ships. These ships ought to have dynamic positioning system. It forces an application of a few thrusters (most often four, seldom more up to eight). Records from a number of multi-mode ships show a mean load of less than 40% of maximum load on the propulsion system. In other side the demand for electric energy of ship industrial part is large, more often than for the propulsion part. In that case the diesel-electric propulsion system application may be economical, because the electric energy generation for all ship 's purposes makes possible the main engines work on the optimum loads on lowest specific fuel consumption and allows them a long-term work on heavy fuels. For multi-mode ships like cable ships, suppliers, drilling vessels are convenient an application of unconventional thrusters with direct electric propulsion as well, especially for dynamic positioning systems. The efficiency of the thrusters is a predominant factor for the successful and economical operation. Forecasted development and rise of quantity of diesel-electric propulsion (it means with electrical transmission) would cause increased interest of unconventional thrusters. Ultimately they may revolutionize ship propulsion systems.
Źródło:
Journal of KONES; 2010, 17, 4; 177-183
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A parametric method for evaluation of resistance of swath ships
Autorzy:
Michalski, J. P.
Powiązania:
https://bibliotekanauki.pl/articles/258660.pdf
Data publikacji:
2008
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
SWATH ships design method
SWATH ships resistance evaluation method
Opis:
This paper contains formulation of a parametric method for evaluation of SWATH ship’s hull resistance. The method was elaborated on the basis of numerical calculation results obtained by using structural methods based on ship hydrodynamic theory and performed for sufficiently large series of body forms with systematically changing ship form parameters. Also, results of verifying investigations dealing with features of the method in question are presented by comparing the obtained resistance characteristics with those achieved by other authors as well as with ship model experimental test results. The obtained results of the verification indicate that the elaborated method can be useful in preliminary designing the SWATH ships.
Źródło:
Polish Maritime Research; 2008, 1; 3-10
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The problem of not driven propellers in Multi - screw ships propulsion arrangements
Autorzy:
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/247889.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
fast ships
ships screw propeller
multi-screw propulsion arrangements
Opis:
Power requirement for ship's movement depends on their size (water displacement) and sailing speed. The problem is especially important for fast ships, because the speed of movement is generating significant high power requirement, while limited displacement, diminishing a drag quantity from one hand, is a reason of limited draft and consequently limited capacity of a hull from the other. Above facts have strong influence at a number, type, power and size of main engines and propellers. Fast ships are designed for reaching maximum speed, but majority of exploitation time, are cruising at lower speed, called partial speed. That exploitation profile requires stopping of some engines or braking of propellers. Not driven propellers are dragged behind the hull, and work at a turbine mode, giving a torque at a propulsion shaft and creates a negative thrust what means the additional drag. The additional drag of not driven propellers must be calculated during the propulsion design stage, and analysis of speed value during different variants of the ship's movement . Torque values and thrusts can be evaluated basing on the universal hydrodynamic characteristics of propellers. the method and example of calculation of the drag created by free-rotating and stopped propellers of the exemplary propulsion set are presented in the paper.
Źródło:
Journal of KONES; 2012, 19, 2; 83-86
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Propulsion characteristics of multi-mode ships in aspect of ships dynamic positioning application
Autorzy:
Herdzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/243980.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ships propulsion
propulsion characteristics
multi-mode ships
dynamic positioning systems
Opis:
The dynamic positioning systems require multi-element ship propulsion application. The chosen solutions have decisive effect on propulsion system possibilities, in ship dynamic positioning accuracy also. The automation system has an essential influence on it, because it is an integral part with propulsion system mponsible for this process. The most often ship propulsion solution based on unconventional thrusters driven by electric motor s also. A few independent propulsion systems is essential but it complicates this system, it is limited the number (most often to 4, seldom more up to eight). There are no solutions with traditional rudder and steering gear. These functions take over azimuthing thrusters because they can generale directional thrust force. It must be settle the question of the number of thruster choose and the span angle of azimuthing (most often by thruster turning). In that case it gets the possibilities of ship positioning, they may display as propulsion system characteristics, giving a view on ąuality of positioning process. The last veriflcation is made in real sea conditions when it may test if chosen solution of ship propulsion system fulfils the requirements of positioning accuracy. It was presented the examples of multi-mode ship propulsions and parameters of theirs propulsion plants.
Źródło:
Journal of KONES; 2010, 17, 3; 127-134
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilisation of data base in preliminary design of marine power plant
Autorzy:
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/244415.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ships propulsion
Marine Power Plant
database
ship’s general dimensions
Opis:
The paper presents general rules of utilization of database, called „significant ships list,” for preliminary design of ship’s propulsion and configuration of power plant. Knowledge collected in the database is related to new buildings classified according to type, displacement, shipping class etc. It encompass general dimensions, characteristics of mobility ,propulsion’s power and type of main engines and propulsors, electric power plant, boilers and main mechanisms of a power plant. In the paper is presented method of utilization of the significant ships list during design of a container ship with capacity of 1300 TEU and speed of 18 knots. The first step of propulsion and main engine’s selection is determination of main dimensions, i.e. displacement, length, draft and breadth. That dimensions cannot be selected random way, due to hull’s mobility, stability and durability constraints. The list of significant ships consisted of 30 units, and amongst them, 17 were selected and analyzed. Others were rejected because of significant difference from mean values what could be due to different class of the ships.
Źródło:
Journal of KONES; 2014, 21, 1; 43-48
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The selected results of the experimental research of solid fuel pneumatic transportation to ship’s boiler
Autorzy:
Luschtinetz, Thomas
Zeńczak, Wojciech
Łuszczyński, Daniel
Powiązania:
https://bibliotekanauki.pl/articles/409978.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
ship’s power plant
ship’s boiler
solid fuel
pneumatic transportation
Opis:
The article presents the problems related to the application of alternative fuel like solid biomass in the shipbuilding. The decreasing resources of the crude oil, the requirements regarding environmental protection as well as the increase of the liquid fuel prices were the reason for the study. The solid biomass comparing to the liquid or gaseous forms has relatively low calorific value. In order to increase this value the solid biomass is subject to the densification or torrefaction process and most often occurs in the shape of pellets. In this form it could be useful on ships. A test stand has been characterised where it can be experimentally verified whether ship’s rolling does affect the changes in flow resistance values during the pneumatic transportation of solid fuel from the storage facility to the boiler. On the basis of the measurements the hydraulic characteristics have been provided for the piping located on the movable platform with and without granular material. The changes in the platform oscillation period have influence on the change in the pressure inside transport piping for each investigated material. The results also show that the platform constantly inclinations do exert an influence on the pressure drop in the transport pipeline during transporting the granular material. It is smaller when the position is inclined. Comparing the results obtained for the different transported materials of a similar nature of the pressure fluctuations could be observed.
Źródło:
Management Systems in Production Engineering; 2019, 3 (27); 144-148
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Approach to Modelling the Ship Performance in Application to Ferry "Stena Baltica"
Autorzy:
Jurdziński, M.
Guze, S.
Powiązania:
https://bibliotekanauki.pl/articles/320801.pdf
Data publikacji:
2010
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
navigation
ships' speed characteristic
Opis:
The paper deals with analysis of ships speed characteristic in open water areas effected by environmental constraints influencing on ship sea keeping parameters in application to ferry "Stena Baltica" operated in the Baltic Sea between Gdynia and Karlskrona harbors.
Źródło:
Annual of Navigation; 2010, 16; 55-66
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An attempt of the specification of the ships navigation process
Autorzy:
Kopacz, Z.
Morgaś, W.
Urbański, J.
Powiązania:
https://bibliotekanauki.pl/articles/320944.pdf
Data publikacji:
2001
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
nawigacja
statki
navigation
ships
Opis:
An attempt of the specification of main issues, such as the objectives, tasks, activities, etc. which are being solved and are being done while the ship is conducted at sea is undertaken in the paper. These issues constitute the substance of the ship’s navigation process and all its sub process. The authors’ belief is that the specification of these issues would enable the better understanding the matter of ship’s navigation process. It could also facilitate the preparation of more precise algorithms of all navigation sub processes, i.e. even those which hardly could be expressed by the means of mathematical relations.
Źródło:
Annual of Navigation; 2001, 3; 91-109
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model tests of the resistance, propulsion and manoeuvrability of ships in the Experimental Centre in Ilawa
Autorzy:
Welnicki, W.
Powiązania:
https://bibliotekanauki.pl/articles/260211.pdf
Data publikacji:
2007
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
resistance
propulsion
manoeuvrability
ships
Opis:
Paper presents the development of resistance, propulsion and steering quality model tests carried out on lake. Such pioneering investigations began in 1956 and were gradually improved and extended. Original equipment and measurement methods were developed. The paper presents those research methods and techniques,and also accuracy of the results, in a historical perspective. Described are also several most important research programmes accomplished in the Centre.
Źródło:
Polish Maritime Research; 2007, S 2; 8-12
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies