Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "overheating" wg kryterium: Temat


Tytuł:
Analiza wpływu powierzchni przegród przezroczystych na mikroklimat pasywnego budynku użyteczności publicznej
Analysis of the effects of the deployment of partitions transparent on microclimate in public passive building
Autorzy:
Dudzińska, A.
Powiązania:
https://bibliotekanauki.pl/articles/104308.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
komfort cieplny
PMV
przegrzewanie
przeszklenia
thermal comfort
overheating
glazing
Opis:
Publikacja zawiera informacje dotyczące wpływu powierzchni przegród przezroczystych na mikroklimat budynku pasywnego. Przeprowadzono pięć symulacji pozwalających na określenie w jakim stopniu rozkład stolarki okiennej jest w stanie zmienić warunki środowiskowe we wnętrzu, wybranego z całego obiektu, pomieszczenia do analizy i wpłynąć na ograniczenie przegrzewania latem. Usuwano o 50% i 100% powierzchni okna na elewacji południowej i północnej. W symulacjach nie uwzględniano innych możliwości związanych z minimalizacją nadmiernych zysków solarnych takich jak rodzaj zastosowanych osłon przeciwsłonecznych, nocne przewietrzanie, wpływ masy termicznej czy też kontrola wilgotności i ruchu powietrza. W związku z wąskim zakresem analizy, rozbieżności w wynikach są niewielkie, pozwalają jednak na sformułowanie wstępnych wniosków. Południowe elewacje szklone przede wszystkim wpływają na wartości temeperatury powietrza wewnetrznego i wskaźnik przewidywanej oceny średniej. Wariant, w którym zredukowano powierzchnie transparentne na elewacji południowej o 100% wykazał najmniejszą wartość wskażnika przewidywanej oceny średniej. Duże ilości promieniowania słonecznego, przenikającego przez spore powierzchnie transparentne po stronie południowej, są powodem dyskomfortu. Okna północne w mniejszym stopniu przyczyniają się do obniżenia zysków solarnych, w porównaniu z południowymi. Projektowanie przeszklenia nie może być przesadzone w żadną ze stron. Zbyt duże powierzchnie przeszklone mogą być nie tylko powodem strat ciepła w zimie, ale też przyczyną przegrzewania latem. Zapewnienie właściwego mikroklimatu w danym środowisku gwarantuje efektywność wykonywanych zadań i zdrowie użytkowników dlatego powinno być kluczową kwestią w projektowaniu.
The publication contains informations concerned to the impact of the transparent dividers deployment on the microclimate of the passive building. Five simulations were conducted allowing to qualify how much location of the windows is able to alter environmental conditions in the interior of the analysed room and it's influence on the limitation of overheating in summer. Windows on the south and northern elevation were removed about 50% and 100%. In the simulations another possibilities connected with minimization of an excessive solar profits were not taken into account such as the kind of applied sun protections, night airing, the influence of the thermal mass or also the control of moisture and the movement of the air. Becouse of the narrow range of analysis, divergences in results are not essential but however they allow to make preliminary conclusions. South glazed elevations first of all cause influence on the temperature values of the internal air and either on the index of the foreseen avarage rate. The variant in which transparent surfaces were reduced on the south elevation about 100% showed the the smallest value of the foreseen average rate. The large quantities of the sunny radiation, penetrating through large transparent surfaces from the south side, are the discomfort reason. Northern windows in confrontation with the south elevation contribute to a lesser extent the lowering of solar profits. Projecting of glazing can't be overdone in both sides. Large surfaces can be the reason of the warmth losses in the winter but either the cause of overheating in the summer. Assuring the proper microclimate in the given environment guarantees the efficiency of executed tasks as well as health of the users and that is why it should be the key matter in projecting.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 4/I; 137-144
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The solar component in the context of the inhabited areas microclimate regulation
Solnechnaja sostavljajushhaja v kontekste regulirovanija mikroklimata zhilykh territorijj
Autorzy:
Koziatnik, I.
Powiązania:
https://bibliotekanauki.pl/articles/77690.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
climate
insolation
overheating
solar radiation
sunlight protection
functional planning
environmental factor
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 8
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przyczyna przyspieszonej degradacji przekładni śrubowej tocznej
The cause of an accelerated degradation of a ball screw
Autorzy:
Przystupa, F. W.
Sokolski, P.
Powiązania:
https://bibliotekanauki.pl/articles/189962.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
diagnozowanie
zużycie
przegrzanie
elementy toczne
diagnosing
wear
overheating
rolling element
Opis:
W pracy przedstawiono studium przypadku uszkodzenia węzła przekładni śrubowej tocznej pracującej w małogabarytowej maszynie roboczej. Skutkiem utraty przez ten mechanizm właściwości umożliwiających poprawną pracę była poważna awaria całego obiektu. W celu określenia przyczyn wystąpienia uszkodzenia zrealizowano szczegółowe badania materiałowe oraz podjęto próbę odtworzenia charakteru przebiegu pracy podzespołu. W wyniku przeprowadzonych analiz struktury materiałowej oraz rozkładu twardości na przekroju elementów tocznych zidentyfikowano przegrzanie przekładni jako przyczynę zaistniałego uszkodzenia. Było ono wynikiem błędnego oszacowania intensywności zjawisk cieplnych w przekładni.
The paper presents a case study of a failure of a ball screw, operating in a small working machine. The result of the decrease of its operational properties was a major break-down of the entire structure. In order to determine the causes of the failure, detailed material tests were carried out. The attempt to reconstruct the character of the course of the work of this component was done as well. The analyses of material structure and hardness distribution in the cross-section of the rolling elements enabled an identification of the occurred failure. The cause was an overheating of the transmission. It was the result of an underestimation of the intensity of thermal effects in the mechanism.
Źródło:
Tribologia; 2012, 4; 205-210
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure formation and properties of overheated steel depending on thermokinetic parameters of crystallization
Autorzy:
Kondratyuk, S. Ye.
Veis, V. I.
Parkhomchuk, Z. V.
Powiązania:
https://bibliotekanauki.pl/articles/367984.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
steel
overheating
structure
crystallization
cooling rate
stal
przegrzewanie
struktura
krystalizacja
szybkość chłodzenia
Opis:
Purpose: The aim of the proposed research is to investigate the mutual influence of the temperature of an overheated melt and its cooling rate during crystallization on the formation of the cast structure and mechanical properties of structural steels. Design/methodology/approach: Two structural medium-carbon steels were melted in induction furnace and poured from temperatures 1520-1670°C into casting moulds with different heat removal ability. This ensured the crystallization and structure formation of the studied steel castings at cooling rates (Vc) of 5°C/sec (sand-clay mould), 45°C/sec (steel mould), 350°C/sec (water cooled copper mould). It was studied a change of structure formation, mechanical characteristics depending on the temperature-kinetic conditions of the processing of the melt. Based on the processing of the array of obtained experimental data using linear regression analysis and a software package, interpolation models and their graphic images obtained allow a quantitative assessment of the established patterns of structural characteristics and mechanical properties of the studied steels depending on melt temperature (T, °C) and its cooling rate (Vc, °C/sec) during crystallization and structure formation. Findings: Among the technological factors that determine the formation of the cast structure and the mechanical properties of steels, the dominant role is played by the intensity of heat removal during the solidification of castings. The high cooling rate of the melt during crystallization determines an increase in the number of crystallization nuclei due to an increase in the degree of supercooling of the melt, eliminates the negative effect of the high overheating temperature of the metal before casting. Research limitations/implications: In the future, the results can be complemented by studies of the influence of the duration of isothermal exposure of the melt at different temperatures of superheating and cooling conditions. Practical implications: The obtained mathematical models (regression equations) that determine the mutual influence of the cooling rate and the temperature of the melt overheating on the structure and mechanical properties of the studied steels make it possible to obtain steel castings with predetermined properties at the level of properties of wrought steel of similar chemical composition. Originality/value: Interpolation models that allow a quantitative assessment of the established patterns of structural characteristics and mechanical properties of the studied steels depending on the melt temperature (T, °C) and its cooling rate (Vc, °C/sec) during crystallization and structure formation are obtained.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2019, 97, 2; 49-56
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Starożytna klimatyzacja
Ancient air conditioning
Autorzy:
Mielińska, Anna
Powiązania:
https://bibliotekanauki.pl/chapters/2194695.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
zmiany klimatu
przegrzewanie
łapacz wiatru
chłodzenie
climate change
overheating
wind catcher
cooling
Opis:
W opracowaniu odniesiono się do wybranego aspektu zmiany klimatu, odczuwanego w terenach zabudowanych jako miejska wyspa ciepła. Przedstawiono wybrane rozwiązania łagodzenia skutków przegrzewania miast, stosowane przez mieszkańców w pustynnym i gorącym klimacie Bliskiego Wschodu. Zestawiono historyczne rozwiązania ochładzania zespołów mieszkaniowych budynkami z wieżami zwanymi łapaczami wiatru. Opracowano typologię tych budowli jako inspirację współczesnych, ekologicznych rozwiązań mających na celu poprawę warunków życia mieszkańców w miastach w warunkach nasilającego się przegrzewania budynków i przestrzeni publicznych.
The article focuses on selected aspects of climate change perceived in built-up areas and known as an urban heat island phenomenon. Selected solutions to mitigate the effects of urban overheating used by residents in the desert and hot climate of the Middle East are presented. Historical solutions for cooling housing complexes using towers called “wind catchers” have been put together and compared. The typology of these buildings was developed as an inspiration for contemporary ecological solutions to improve the living conditions of residents in cities in the conditions of increasing overheating of buildings and public spaces.
Źródło:
Dziedzictwo architektoniczne. Ochrona i badania obiektów zabytkowych; 26-37
9788374931519
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermographic Research of Photovoltaic System Operating in Shaded Conditions
Autorzy:
Bożek, E.
Basista, G.
Powiązania:
https://bibliotekanauki.pl/articles/114460.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
photovoltaic systems
polycrystalline cells
shaded photovoltaics
overheating of PV cells
thermovision in photovoltaics
Opis:
Results of infrared research conducted on a photovoltaic system which works in an on-grid mode for over a year are presented in the article. The installation described is regularly shadowed by a cooling system. Thermograms of photovoltaic modules in strong and light shadow were conducted. These images show that even in very weak shadow the PV cells are overheated. This has led to small point damages in the amorphous panels and in the future it may also lead to the destruction of polycrystalline modules.
Źródło:
Measurement Automation Monitoring; 2015, 61, 6; 253-256
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposit attack in tubes of power plant steam boilers
Zniszczenia podosadowe rur energetycznych kotłów parowych
Autorzy:
Balitskii, A.
Ripey, I.
Chmiel, J.
Powiązania:
https://bibliotekanauki.pl/articles/257974.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
kocioł parowy
rura
korozja podosadowa
przegrzanie
mikrostruktura
steam boiler
tubes
deposit attack
overheating
structure
Opis:
This article presents the results of the inspection of damaged tubes of steam boilers, the damage being a result of deposit attack. Changes in the chemical composition of feedwater, i.e. its hardness increased due to leaks in brass tubes of the turbine condenser, result in the formation of scale on the tube material, followed by corrosion, overheating and numerous defects. Only during one of the necessary stops, damage of varying degree to over 20 tubes was detected, from a pit (or crack initiation) to fractures of a few tubes. The results of visual inspection and mechanical and metallographic tests of the damaged tubes are given.
W pracy przedstawiono wyniki badań uszkodzeń rur kotłów parowych, interpretowanych jako wynik procesów korozji podosadowej. Jako główne przyczyny uszkodzeń wskazuje się obecność w wodzie kotłowej związków żelaza (III) oraz związków miedzi (pochodzących z układu skraplacza turbiny), których osady stanowią obszary katodowe, stymulujące rozwój wżerów stanowiących anody. Przedstawiono wyniki inspekcji wizualnej rur, badań właściwości mechanicznych, badań mikrostruktury oraz analiz chemicznych.
Źródło:
Problemy Eksploatacji; 2010, 4; 79-89
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aircraft brake temperature from a safety point of view
Autorzy:
Piľa, J.
Korba, P.
Hovanec, M.
Powiązania:
https://bibliotekanauki.pl/articles/196528.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
brake
temperature
overheating
aircraft safety
brake cooling
hamulec
temperatura
przegrzanie
bezpieczeństwo samolotów
chłodzenie hamulców
Opis:
Safety is critical throughout all stages of aircraft operation, from air mission to ground operation. One of the most important airframe systems that influences the efficacy of ground safety is a wheel brake system. Aircraft ground speed deceleration requires the dissipation of kinetic energy, which depends on aircraft weight and speed. Significant levels of aircraft kinetic energy must be dissipated in the form of heat energy. The brakes of heavy aircraft are especially prone to overheating during landing and taxiing on the ground. The aim of this paper is to focus on the dangers caused by aircraft brakes when overheating and ways in which to eliminate brake overheating problems from a safety perspective.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2017, 94; 175-186
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Telematics based concept focused to avoid engine and vehicle trouble due to overheating
Autorzy:
Szpytko, J.
Udoji, C.
Powiązania:
https://bibliotekanauki.pl/articles/393539.pdf
Data publikacji:
2019
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
transport telematics
transport device availability
overheating
temperature sensor
telematyka transportu
dostępność urządzenia transportowego
przegrzanie
czujnik temperatury
Opis:
Overheating of vehicles is gradually becoming a common problem especially in tropical areas and during tropical seasons in the world. Although there are so many factors can cause overheating, hot weather is the most common cause of overheating. Coolants and thermostats in the radiator are no longer sufficient anymore. Traditional solutions preventing an engine from becoming overheated are: coolant levels must be maintained and without leaks; the oil level and viscosity must have the required properties; accepted technical conditions of radiator hoses and the radiator fan; the engine temperature must be acceptable. Modern cars are equipped with the systems supporting the operation process. The aim of this article is the concept of a solution that uses telematics to minimize engine failures due to overheating and to increase the operational readiness of transport means.
Źródło:
Archives of Transport System Telematics; 2019, 12, 4; 31-35
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Overheating Degree on Activation Efficiency of Water-glass Containing Sandmix Hardened by Traditional Drying
Autorzy:
Stachowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/380929.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry engineering
moulding sand
overheating degree
reclaimed binder
odlewnictwo
masa formierska
stopień przegrzania
spoiwo regenerowane
Opis:
Presented are results of a preliminary research on the possibility to use innovative operations of activating inorganic binders during a reclamation process of used sandmixes containing water-glass, hardened by traditional drying. The moulding sand to be examined was prepared of high-silica sand and the selected water-glass grade 145. Next, it was subject to mixing components, compacting, hardening by traditional drying at 100°C, thermal loading of the mould up to 800°C, cooling-down to ambient temperature, knocking-out, various kinds of mechanical dry and wet reclamation to restore bonding properties to the sandmix. For examinations, two ranges of overheating the mould were selected, determined on the grounds of final strength (Rctk) of the sandmixes. It was found, among others, that overheating and dedusting affect activation of a used sandmix. There is a possibility of partial restoring binding properties of the binder by its rehydration in used-up and properly processed moulding sand, provided that hardening was performed by a physical method.
Źródło:
Archives of Foundry Engineering; 2015, 15, 2 spec.; 77-82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research the stability of refrigerant overhating
Autorzy:
Śniegowski, Sebastian
Gaszek, Krzysztof
Burlaga, Zuzanna
Powiązania:
https://bibliotekanauki.pl/articles/24201293.pdf
Data publikacji:
2023
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
refrigeration
expansion valve
refrigerant
overheating the refrigerant
chłodnictwo
zawór rozprężny
czynnik chłodniczy
przegrzanie czynnika chłodniczego
Opis:
The article consists of two parts. The first of them presents an overview drossel elements used in cooling devices. The second part of the article is focuses on the study of the stability of the superheat of the factor. Two expansion valves were compared, the thermostatic one and the electronic one. For this purpose, advanced measuring devices with the possibility of mobile system control were used in the research.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2023, 2; 7--16
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Natural ventilation and energy efficiency in non-domestic buildings
Autorzy:
Pieczara, J.
Powiązania:
https://bibliotekanauki.pl/articles/101474.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
natural ventilation
adaptive thermal comfort
energy efficiency
air quality
passive cooling
risk of overheating
thermal mass
Opis:
Over the past 50 years the use of air conditioning in non-domestic buildings has become a norm and an indicator of status. Today the rediscovering of the natural ventilation is a part of rediscovering the buildings’ energy efficiency, or maybe even a part of a wider approach, which is a desire to be closer to nature. The main task of all ventilation systems is to maintain an appropriate indoor air quality and to improve the indoor environment. Natural ventilation systems could do the above using less energy than mechanical systems. However, it requires also the implementation of other passive measures. The most important of them are: the reduction of the harmful air contaminants, the control of heat gains, the exposition of the building’s thermal mass and utilisation of the night cooling. Because of energy efficiency and thermal comfort reasons, in temperate climate ventilation systems have to work according to at least three scenarios: spring/autumn, winter and summer. The thermal comfort parameters in naturally ventilated buildings are usually more variable than in air-conditioned ones, what does not mean that the occupants will experience thermal discomfort. Therefore, thermal comfort in passively ventilated buildings should be evaluated according to the adaptive comfort standard, appropriated for the naturally ventilated buildings. The natural ventilation has its limits and probably not all buildings can be ventilated naturally. From the energy efficiency and thermal comfort reasons, implementing the mixed mode systems is sometimes more feasible. However, the real reason why the full potential of natural ventilation could not be explored is very often the lack of confidence in relying exclusively on it.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2017, III/1; 935-947
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystallization of AlSi17Cu5Mg Alloy after Time-thermal Treatment
Autorzy:
Piątkowski, J.
Kamiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/382327.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hypereutectic Al-Si alloy
overheating
thermal analysis
crystallization process
stop nadeutektyczny Al-Si
przegrzanie
analiza termiczna
proces krystalizacji
Opis:
In the dissertation it has been shown, that so called “time-thermal treatment” (TTT) of the alloy in liquid state as overheating the metal with around 250°C above Tliq. and detailing it in temperature for 30 to 40 minutes has the influence on changing the crystallization parameters (Tliq., TEmin., TEmax., TE(Me), TSol.). It was ascertained, that overheating the AlSi17Cu5Mg alloy substantially above Tliq. results with microcrystalline structure. Evenly distributed in the eutectic warp primeval silicon crystals and supersaturated with alloying additives of base content (Cu, Mg, Fe) of α(Al) solution, ensures not only increase durability in ambient temperature, but also at elevated temperature (250°C), what due to it’s use in car industry is an advantage.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 83-86
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza parametrów mających wpływ na zmianę zapotrzebowania na chłód w okresie letnim w budynku zamieszkania zbiorowego
Autorzy:
Starczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/110955.pdf
Data publikacji:
2018
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
przegrzewanie latem
chłodzenie
parametry obniżające zapotrzebowanie na chłód
overheating of the rooms in summer
cooling
lowering cooling demand
Opis:
Artykuł przedstawia analizę problemu zapotrzebowania na chłodzenie pomieszczeń w okresie letnim wynikającego z powiększenia okien na elewacjach południowych. Celem badania jest analiza parametrów mających wpływ na zmianę zapotrzebowania na chłód i wybór najkorzystniejszych z nich. Parametry poddane analizie to: temperatura wewnętrzna w pomieszczeniu (zakres 21–24°C), współczynnik przenikania ciepła przez przenikanie dla okien U (zakres: 0,7 – 1,3 W/m2K), współczynnik zacienienia przez urządzenia przeciwsłoneczne fc (zakres: 0,15 – 0,95) oraz współczynnik zacienienia okna przez zewnętrzne elementy zacieniające Fsh,ob.,k (zakres: 0,7 – 1,0).
This article presents an analysis of the problem of demand for space cooling during the summer resulting from enlargement of windows on the south façade. The aim of the study is to analyze the parameters which impact the demand for cooling, and the selection of the most favorable of them. The parameters analyzed: the internal temperature of the room (range 21-24 ° C), heat transfer coefficient for windows U (range: 0,7 – 1,3 W/m2K), and a shading devices rate fc (range: 0.15 - 0.95) and shading coefficient of the window by external shading Fsh, ob,k (range: 0.7 - 1.0).
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2018, 3-4; 42-50
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and Mechanical Properties of AlSiCuMg Alloy after Thermo Processing
Autorzy:
Piątkowski, J.
Kamiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/379577.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hypereutectic Al-Si alloy
overheating
CuP10 master alloy
mechanical properties
microstructure
stop nadeutektyczny Al-Si
przegrzanie
stop CuP10
właściwości mechaniczne
Opis:
In the dissertation it has been shown, that so called „time-thermal treatment” (TTT) of the alloy in liquid state, as overheating the metal with around 250°C above the Tliq. and detaining it in this temperature for around 30 minutes, improves the mechanical properties (HB, Rm, R0,2). It was ascertained, that overheating the AlSi17Cu5Mg alloy aids the modification, resulting with microcrystalline structure. Uniform arrangement of the Si primeval crystals in the warp, and α(Al) solution type, supersaturated with alloying elements present in the base content (Cu, Mg) assures not only increased durability in the ambient temperature, but also at elevated temperature (250°C), what is an advantage, especially due to the use in car industry.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 79-82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies