Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "natural frequencies" wg kryterium: Temat


Tytuł:
Effect of exciting force amplitude on occurrence of parametric resonance phenomenon in vibrating screen
Autorzy:
Bąk, Ł.
Stachowicz, E.
Noga, S.
Skrzat, A.
Powiązania:
https://bibliotekanauki.pl/articles/128313.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
vibrating screen
parametric resonance
natural frequencies
przesiewacz wibracyjny
rezonans parametryczny
drgania własne
Opis:
The paper considers the effect of exciting force amplitude on occurrence of parametric resonance phenomenon in vibrating screens by using experimental methods. The measuring test is performed for three cases of excitation force levels. For each force level sieve parametric vibrations are excited by using proper excitation frequency. It is shown that an increase of the excitation force results in an increase in the sieve vibration amplitude. The dependence between excitation force and sieve parametric vibrations is nonlinear. The value of excitation force has an effect on the sieve vibration mode shape. Two vibration mode shapes are detected. It is found that the excitation frequency influenced the vibration amplitude. An increase of sieve preload has no effect on the amplitude level, however it results in an increase of the sieve vibration frequency.
Źródło:
Vibrations in Physical Systems; 2016, 27; 42-46
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental investigation of the screen operation in the parametric resonance conditions
Autorzy:
Bąk, Ł.
Noga, S.
Stachowicz, F.
Powiązania:
https://bibliotekanauki.pl/articles/386586.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
vibrating screen
parametric resonance
natural frequencies
przesiewacz wibracyjny
częstotliwość własna
rezonans parametryczny
Opis:
In this paper the experimental studies of the screen working in the parametric resonance condition are discussed. The investigations are conducted for laboratory parametric resonance screen. The measuring test is performed for four cases of tension force values. The full sheet metal instead of the sieve is used. For each considered case the natural frequency of the plate and the parameter modulation frequency are determined.The achieved results are presented and discussed. It is shown that the highest sieve plate amplitude is obtained when the parameter modulation frequency is two times larger than natural frequency of the sieve plate. This parametric resonance vibration was observed only for tension force equal to 4000 N because of the rotational speed limits of electrical vibratos.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 4; 191-194
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zachowania dynamicznego układu wstęgi papierniczej z wykorzystaniem pomiaru optycznego
Dynamic analysis of paper web with utilization of optical measurement
Autorzy:
Cedrowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/152638.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiar optyczny
badania dynamiczne
częstotliwości drgań własnych układu
optical measurement
dynamic analysis
natural frequencies
Opis:
W pracy przedstawiono wyniki analiz dynamicznych drgań płyty wykonanej z tektury falistej. Rezultaty obliczeń teoretycznych częstości drgań własnych płyty, w których wykorzystano model kompozytowy tektury, porównano z wynikami badań doświadczalnych. Do badań doświadczalnych opracowano metodę wyznaczania częstości własnych w oparciu o pomiar optyczny z wykorzystaniem kamery cyfrowej. Ze względu na własności fizyczne materiałów papierniczych, pomiar optyczny jest szczególnie użyteczny przy prowadzeniu badań dynamicznych. Pomiary z użyciem kamery do przebiegów szybkozmiennych pozwalają na wyznaczenie częstości i odpowiadających im postaci drgań z dużą dokładnością.
Theoretical and experimental results of dynamic analysis of rectan-gular plate made of corrugated board were presented in this paper. The composite model of corrugated board was applied to theoretical calculations. In order to determine physical parameters of cardboard, papers of wave from central layers were subjected to homogenization process. Due to the fact that corrugated board and paper have small bending stiffness, a method based on optical measurement of determination the natural frequencies of the plate was used in experimental investigations. Rectangular plate with two straight supported and two free edges was fixed to the vibrating table. Analysis of natural modes enables the observation of vibrations in the vicinity of resonance frequencies. Using optical measurement of fast motion the natural frequency of the plate and amplitudes of vibrations can be measured with high precision. Three films for three different frequencies near the resonance peak are performed to allocate the top of parabola. Optical measurement precisely records dynamic behaviour of the plate made of corrugated board. The introduced results of dynamic investigations show that composite model of corrugated board is not enough precise, especially for higher frequencies.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 8, 8; 905-906
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Double-Panel Structure Modification on Vibroacoustical Properties of a Rigid Device Casing
Autorzy:
Chrapońska, Anna
Rzepecki, Jarosław
Mazur, Krzysztof
Wrona, Stanisław
Pawełczyk, Marek
Powiązania:
https://bibliotekanauki.pl/articles/176468.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
noise control
vibration control
double-panel structures
active casing
natural frequencies
modeshapes
Opis:
Nowadays, noise generated by devices is a serious issue in industry and in everyday life, because it may cause health damage to humans. In this research, a cubic rigid device casing built of double-panel thin steel walls is employed to reduce noise emitted from an enclosed noise source. Double-panel structure is used because of good sound insulation it provides. There exist three main groups of noise reduction methods, i.e. passive, semi-active and active. In this paper, a semi-active modification of double-panel structure is applied and examined. The bistable actuator (solenoid) mounted between incident and radiating plates changes its state due to applied constant voltage, causing the coupling of plates. Experimentally measured natural frequencies and modeshapes of the structure are compared to the simulation results. The influence of proposed modification on dynamical properties of the structure is analyzed and discussed.
Źródło:
Archives of Acoustics; 2020, 45, 1; 119-127
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Specificity of dynamic analysis of reinforced concrete foundations under turbogenerators
Autorzy:
Ciesielski, R.
Wrana, B.
Powiązania:
https://bibliotekanauki.pl/articles/279805.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
turbogenerators foundations
spectral element method
natural frequencies of foundation
Opis:
In dynamic analysis of reinforced concrete turboset foundation updated numerical methods analysis should be used: FEM (Finite Element Method) and SEM (Spectral Element Method). This second one adopted to frame foundation analysis is presented in details. The advantage of this method for turbojet foundation dynamic analysis is proved. Numerical example of calculation is presented too.
Specyfika obliczeń dynamicznych żelbetowych fundamentów pod turbozespoły. Analiza dynamiczna fundamentów pod turbozespoły wymaga, na obecnym poziomie techniki, obliczeń zaawansowanymi metodami numerycznymi. W pracy przedstawiono problem doboru modeli dynamicznych dla żelbetowych fundamentów ramowych dla metody elementów skończonych (FEM) i metody elementów spektralnych (SEM). Podano przykłady obliczeń.
Źródło:
Journal of Theoretical and Applied Mechanics; 2000, 38, 2; 247-258
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis of natural frequencies and mode shapes of the da Vinci medical robot arm
Autorzy:
Geda, Helena
Kuliberda, Agata
Stręk, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2146566.pdf
Data publikacji:
2020
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
natural frequencies
mode shapes
finite elements method
medical robot arm
częstości własne
drgania własne
metoda elementów skończonych
ramię robota medycznego
Opis:
This paper presents an analysis of the natural frequency and mode shapes of the arm and the working tip of the da Vinci robot, which is used in various types of surgical procedures. The survey was conducted using Autodesk Fusion 360. Using the da Vinci robot's construction data, a model was designed taking into account the characteristic dimensions and materials used. The obtained shapes of vibrations for natural frequencies allowed us to predict the influence of resonance phenomenon on the manipulator's arm. The movement of the tool along the wrong track, caused by an increase in vibration amplitude, may adversely affect the operation of the device. The results of the conducted research, therefore, provide information for which natural frequencies the values of these amplitudes increase.
Źródło:
Vibrations in Physical Systems; 2020, 31, 2; art. no. 2020205
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation of the free vibration of partially clamped rectangular plates
Autorzy:
Gharaibeh, M. A.
Obeidat, A. M.
Obaidat, M. H.
Powiązania:
https://bibliotekanauki.pl/articles/265990.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
analiza elementów skończonych
częstotliwości naturalne
płyta elastyczna
elastic plates
plates with partially clamped edges
natural frequencies and mode shapes
finite element analysis
Opis:
This paper studies the free vibration characteristics of rectangular plates with partially clamped edges around the corners using the finite element method. ANSYS Parametric Design Language (APDL) was utilized to produce the finite element (FE) models and to run the analysis. The FE models were used to obtain the plate first natural frequency and mode shape. A comprehensive investigation of the effect of the plate geometric parameters and different boundary condition properties on the natural frequency and mode shapes is presented. The results showed that the vibration characteristics of the structure are greatly dependent on the plate size and the constraint properties.
Źródło:
International Journal of Applied Mechanics and Engineering; 2018, 23, 2; 385-400
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic characteristics of the technological complex based on parallel mechanisms of kinematics
Charakterystyki dynamiczne mechanizmów technologicznych opartych na kinematyce równoległej
Autorzy:
Gurzhіj, A. A.
Strutins'kij, S. V.
Powiązania:
https://bibliotekanauki.pl/articles/258380.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
technological complex spatial system
drive
frequency response
pulse characteristic
natural frequencies
damping parameter
mathematical model
transfer function
złożony system przestrzenny
napęd
pasmo przenoszenia
charakterystyki impulsowe
częstotliwości naturalne
parametr tłumienia
model matematyczny
Opis:
The technique and results of experimental studies of dynamic characteristics of spatial Drive Systems, which includes six coordinate parallel kinematic machine and system manipulation as six coordinate table. The amplitude-frequency and impulse response relative movement of the table and platform machine based on the analysis of characteristics from the mathematical model of the spatial system drive as the transfer function and defines the numerical parameters of the model. Technological complex spatial systems, drives, frequency response, pulse characteristics, natural frequencies, damping parameters, mathematical models, transfer functions.
W artykule przedstawiono metodykę oraz wyniki badań eksperymentalnych charakterystyki dynamicznej przestrzennych systemów napędowych maszyny, na które składa się sześć współrzędnych równoległej kinematyki i manipulacji systemu. Częstotliwości i amplitudy odpowiedzi impulsowej względnego ruchu maszyny, obejmującej stolik oraz platformę ustalono na podstawie analizy cech modelu matematycznego systemowego dysku przestrzennego, który traktowano jako funkcję przenoszenia umożliwiającą zdefiniowanie parametrów numerycznych modelu.
Źródło:
Problemy Eksploatacji; 2014, 1; 57-69
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recursive differentiation method: application to the analysis of beams on two parameter foundations
Autorzy:
Hassan, M. T.
Doha, E. H.
Powiązania:
https://bibliotekanauki.pl/articles/949320.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
critical loads
natural frequencies
recursive differentiation method
beam on elastic foundation
Opis:
The recursive differentiation method (RDM) is introduced and employed to obtain analytical solutions for static and dynamic stability parameters of beams resting on two-parameter foundations in various different end conditions. The present analysis reflects the reliability, efficiency and simplicity of the proposed RDM in tackling boundary value problems. In fact, it is widely common that the critical load accompanied with the first buckling mode is the smallest critical load, and then it is the dominant factor in the static stability analysis. In contrast, the present analysis indicates that such a conclusion is correct only for the case of beams without foundations or in the case of a weak foundation relative to the beam. It is proved that critical loads accompanied with higher buckling modes may be smaller than those accompanied with the lower modes and then it may control the stability analysis. The same phenomenon exists for natural frequencies in the presence of an axial load. Several illustrations are introduced to highlight the effects of both the foundation stiffness and beam slenderness on the critical loads and natural frequencies.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 1; 15-26
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the variability of the shape of short axisymmetric rods on the value of basic natural frequency of longitudinal vibrations
Autorzy:
Kozień, Marek S.
Powiązania:
https://bibliotekanauki.pl/articles/2146624.pdf
Data publikacji:
2021
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
rods
longitudinal vibrations
natural frequencies
pręty
drgania wzdłużne
drgania własne
Opis:
Rods with a relatively short length in relation to their transverse dimensions with a variable cross-section along the axis, subjected to longitudinal vibrations, have the character of stocky rods, for which the classic geometric principles used for rods are not fully met. For small engineering elements, the postulated design frequencies of natural vibrations in the very high cycle fatigue analyses reach the values of a dozen or so, small, several dozen kHz. In the article, the sensitivity of the value of the basic natural frequency to the change in the shape of the element is analysed and discussed. The analysis is conducted using finite element method.
Źródło:
Vibrations in Physical Systems; 2021, 32, 2; art. no. 2021212
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of eigenfrequencies of the foot prosthesis with auxetic component layer
Autorzy:
Łączna, Daria
Dłużniewski, Filip
Stręk, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2146574.pdf
Data publikacji:
2020
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
natural frequencies
mode shapes
finite elements method
foot prosthesis
częstości własne
drgania własne
metoda elementów skończonych
proteza stopy
Opis:
In this paper, natural frequencies of a three-layered foot prosthesis are investigated. The model of foot prosthesis consisted of a three-layered base, which substitutes a human foot and an element in the shape of an arc that represents a shank of human. The base consists of three layers made of carbon fiber. In the lower part of the prosthesis, the auxetic layer is used as the inner layer. Numerical analysis is made for different parameters of the central layer: the thickness and the value of Poisson’s ratio. The simulations are used to investigate the influence of an auxetic layer on prosthesis vibrations and compare the impact of different parameters on results. Calculations are made using the finite element method implemented in Autodesk Fusion 360. The results show that the auxetic layer has a great impact on tolerance to vibrations and mobility.
Źródło:
Vibrations in Physical Systems; 2020, 31, 2; art. no. 2020214
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Natural frequencies of layered elongated cylindrical panels for geometrically nonlinear deformation at discrete consideration of components
Autorzy:
Marchuk, M.
Goriachko, T.
Pakosh, V.
Powiązania:
https://bibliotekanauki.pl/articles/128246.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
elongated layered panel
nonlinear vibrations
perturbation method
natural frequencies
panele podłużne
drgania nieliniowe
metoda perturbacji
częstotliwość drgań własnych
Opis:
The proposed and verified the technique of finding a finite number of first natural frequencies for geometrically nonlinear vibrations of layered elongated cylindrical panels at discrete consideration of components. The influence of the radius of curvature on the natural frequencies of three- and five-layered panels is investigated. The dependence between the volume of filler three-layer panels and the lowest natural frequency has been established.
Źródło:
Vibrations in Physical Systems; 2016, 27; 255-264
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza dynamiczna kompozytowych konstrukcji cienkościennych
Dynamic analysis of thin-walled composite structures
Autorzy:
Markiewicz, B.
Ziemiański, L.
Powiązania:
https://bibliotekanauki.pl/articles/104454.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
pręt kompozytowy
pręt cienkościenny
model prętowy
modelowanie MES
dynamika
częstotliwość drgań
composite beam
thin-walled beam
beam element
FEM modeling
natural frequencies
Opis:
W pracy przedstawiono analizę dynamiczną kompozytowej konstrukcji cienkościennej o przekroju zamkniętym prostokątnym, o różnych schematach statycznych. Do analizy wykorzystano modele powłokowe i odpowiadające im uproszczone modele prętowe. W modelach powłokowych uwzględniona została ortotropia materiału kompozytowego i różne warianty ułożenia włókien nośnych w poszczególnych warstwach. W modelach belkowych dokonano homogenizacji materiału uzyskując materiał izotropowy o średniej sztywności zastępczej. W analizie uwzględniono dodatkowe usztywnienia w postaci przepon wewnętrznych. Analizowano częstotliwości własne i odpowiadające im postacie drgań. Zbadano jaki wpływ na wyniki ma kąt orientacji włókien w warstwach, smukłość belki i schemat statyczny oraz porównano wyniki otrzymane dla modeli powłokowych z wynikami otrzymanymi dla uproszczonych modeli prętowych.
The paper presents a dynamic analysis of closed thin-walled (CTW) section composite structures with different boundary conditions. Analysis is carried out with a use of shell models and corresponding simplified beam models. The shell models include orthotrophy of the composite material and different fiber orientation angles in laminas. In the beam models the material is homogenized and treated as isotropic with mean material properties. The numerical analysis is also performed for the same beam with added internal diaphragms. The results are presented in the form of natural frequencies and corresponding mode shapes. The effects of the boundary conditions, fiber angle and slenderness are studied. The results obtained for the shell models are compared with those for the simplified beam models.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 2/I; 291-302
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Natural transverse vibrations of helical springs in sections covered with elastic coatings
Autorzy:
Michalczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/200869.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
helical spring vibrations
natural frequencies
free transverse vibrations
axially loaded spring
spring with coatings
drgania sprężyny śrubowej
częstotliwości naturalne
wolne wibracje
Opis:
It has been demonstrated in previous studies that local elastomer coatings covering the end coils of helical springs can efficiently reduce the amplitudes of circum-resonant vibrations in such springs. The analysis of the influence that elastic coatings have on the frequencies and modes of natural transverse vibrations of springs is presented in this paper. The concept of the equivalent beam of the Timoshenko type is utilized in calculations of the frequencies and modes of transverse vibrations. The model developed allows users to determine the frequencies and modes of symmetric as well as antisymmetric vibrations of axially loaded springs with elastic coatings of arbitrary length. A comparison of the results obtained using FEM analysis, in which the model represented the actual spring geometry, with the results obtained by means of the presented model indicates its high accuracy.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2017, 65, 6; 949-959
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A simple formula for predicting the first natural frequency of transverse vibrations of axially loaded helical springs
Autorzy:
Michalczyk, Krzysztof
Bera, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/282017.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
helical springs
natural frequencies
helical spring vibrations
transverse vibrations
helical spring stability
Opis:
A new formula that allows the first natural frequency of transverse vibrations of axially loaded steel helical springs to be determined has been presented in the paper. The relationship is easy to use and allows finding the first natural frequency of spring vibrations without the necessity of solving analytical or numerical models. According to the authors’ knowledge, this is the first such a formula and, consequently, when this frequency becomes zero, it enables determination of the critical axial force or deflection causing the buckling of the spring. The way of obtaining the described formula is presented in the paper. The results of this formula are compared with those obtained using FEM and experiments. The advantages, drawbacks and limitations of the proposed relationship are also discussed.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 3; 779-790
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies