Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "modeling method" wg kryterium: Temat


Tytuł:
Assessment of sinkhole hazard in the post-mining area using the ERT method and numerical modeling
Autorzy:
Ścigała, Roman
Szafulera, Katarzyna
Jendryś, Marek
Powiązania:
https://bibliotekanauki.pl/articles/29521070.pdf
Data publikacji:
2023
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
shallow excavations
sinkhole threat
ERT method
numerical modeling
finite difference method
protection of mining areas
Opis:
The loss of stability of shallow voids existing in the rock mass often results in the formation of sinkholes on the surface. This has a significant impact on the threat to public safety. Therefore, it is crucial to recognize the presence of such voids, especially in old post-mining areas, where shallow extraction was previously conducted, and there is a lack of mapping documentation indicating the location of underground workings. This paper presents an example illustrating a proposed procedure for recognizing shallow voids, which consists of two research works: geophysical research combined with numerical analyzes used as a kind of forward modeling. This combination increases the possibility of accurately locating potential sinkhole occurrences. The first part of this article provides selected literature information on the occurrence of sinkhole hazards. The second part presents the results of subsurface layer investigations of the rock mass conducted using electrical resistivity tomography (ERT). The third part focuses on assessing the threat of sinkhole formation by using forward numerical modeling performed with the FLAC 3D software to confirm the subsurface structures identified through the ERT method. The results of the analyzes conducted with both methods are then discussed in terms of their suitability for assessing the associated risk. The research conducted within the framework of this study confirms the effectiveness of the ERT method combined with numerical modeling for evaluating the state of the rock mass. This method can be considered a valuable tool for supporting decision-making in identifying post-mining areas that are particularly at risk of sinkhole formation.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2023, 75 (147); 20-34
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of Microwave Cavities Based on SIBC-FDTD Method for EM Wave Focalization by TR Technique
Autorzy:
Li, Zhigang
Aimer, Younes
Bouazza, Tayeb H. C.
Powiązania:
https://bibliotekanauki.pl/articles/2142318.pdf
Data publikacji:
2022
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
curvilinear modeling
EM waves focalization
SIBCFDTD method
TR technique
Opis:
The time reversal (TR) techniques used in electromagnetics have been limited for a variety of reasons, including extensive computations, complex modeling and simulation, processes as well as, large-scale numerical analysis. In this paper, the SIBC-FDTD method is applied to address these issues and to efficiently model TR systems. An original curvilinear modeling method is also proposed for constructing various obstacles in a 2D microwave cavity and for processing the corners of the cavity. The EM waves’ spatio-temporal focalization has been realized, and results of the simulations further prove the accuracy and effectiveness of this modeling method. Furthermore, they demonstrate that the microwave cavity processes may significantly improve the focalization quality in terms of SSLL enhancement.
Źródło:
Journal of Telecommunications and Information Technology; 2022, 3; 59--66
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation modeling for evaluation of efficiency of observed ship coordinates
Autorzy:
Vorokhobin, I.
Burmaka, I.
Fusar, I.
Burmaka, O.
Powiązania:
https://bibliotekanauki.pl/articles/2172471.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
ship coordinates
observed ship coordinates
simulation modeling
lines of position
LOP errors
method of least squares
Opis:
Simulation computer modeling was used to evaluate the efficiency of the vessel’s observed coordinates using the mixed laws of distribution errors of the first and second type for lines of position (LOP). Simulation modeling showed good convergence of evaluation of efficiency calculated by analytical expressions and obtained by simulation. A graphical depiction of the observed points’ deviation relative to the mathematical expectation in the case of distribution of LOP errors of both types according to mixed laws is obtained by the method of least squares and the method of maximum likelihood estimation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2022, 16, 1; 137--141
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of wave processes of hydraulic oils on the operation of a hydraulic drive
Wpływ procesów falowych występujących w olejach hydraulicznych na działanie napędu hydraulicznego
Autorzy:
Hunko, Iryna
Tsurkan, Oleh
Shargorodskiy, Serhiy
Shchur, Taras
Beloev, Hristo
Kovalyshyn, Oleksandra
Domin, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2204302.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
hydraulic drives
mathematical modeling
Runge-Kutta-Feldberg method
wave processes
napęd hydrauliczny
modelowanie matematyczne
metoda Runge-Kutta-Feldberga
proces falowy
Opis:
The paper reviews the state of research of wave processes in hydraulic systems of machines, and their impact on the quality and stability of hydraulic drives. As noted in the works of previous researchers, these phenomena occur in hydraulic systems and adversely affect the quality and stability of their work, significantly reducing reliability. The method of construction of mathematical models is offered. A mathematical model of the hydraulic system with two series-connected hydraulic motors is built, taking into account transients. The Runge-KuttaFeldberg method with automatic change of the integration step was used to solve this model. The application of this method makes it possible to estimate the amplitude and frequency of the pressure wave in real time for each part of the pipeline. As a result of the analysis of the obtained transients it was concluded that at the length of the pressure line in a group hydraulic drive with 2 series-connected hydraulic motors up to 1.5 m, wave processes do not significantly affect the system and in the mathematical model they can be ignored. With the length of the pressure line from 1.5 m to 9 m, the wave processes in the cavity do not affect the stability of the system, although significantly impair the quality of its work. Hydraulic systems with a pressure line length of more than 9 m are not recommended for implementation, because the wave processes in the cavity lead to vibrations and noise in the hydraulic system and require additional measures to eliminate the impact of this phenomenon.
Niniejszy artykuł stanowi przegląd badań nad procesami falowymi w układach hydraulicznych maszyn, ich wpływ na jakość i stabilność układów hydraulicznych. Jak zauważono w pracach poprzednich badaczy, te zjawiska występują w układach hydraulicznych i negatywnie wpływają na jakość i stabilność ich pracy znacząco zmniejszając ich niezawodność. Zaproponowano metodę budowy modeli matematycznych. Skonstruowano model matematyczny układu hydraulicznego z dwoma szeregowo połączonymi silnikami hydraulicznymi z uwzględnieniem napięć przejściowych. Do rozwiązania tego modelu zastosowano metodę Runge-Kutta-Feldberga z automatyczną zmianą kroku całkowania. Zastosowanie tej metody pozwala na oszacowanie amplitudy i częstotliwości fali ciśnienia w czasie rzeczywistym dla każdego odcinka przewodu. W wyniku przeprowadzonej analizy stwierdzono, że przy długości przewodów ciśnieniowych do 1,5 m w grupowym napędzie hydraulicznym z dwoma szeregowo połączonymi silnikami hydraulicznymi, procesy falowe nie wpływają znacząco na układ, a w modelu matematycznym można je ignorować. Przy długości przewodu ciśnieniowego w zakresie 1,5 m do 9 m, procesy falowe we wnętrzu nie wpływają na stabilność układu, ale znacząco wpływają na jakość jego pracy. Układy hydrauliczne o długości przewodów ciśnieniowych większej niż 9 m nie są zalecane, ponieważ procesy falowe we wnętrzu prowadzą do wibracji i hałasu w systemie hydraulicznym i wymagają dodatkowych działań w celu wyeliminowania wpływu tego zjawiska.
Źródło:
Agricultural Engineering; 2022, 26, 1; 91--104
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Сучасні засоби навчання на уроках природничого циклу в початковій школі
Modern Teaching Materials in Natural Cycle Lessons in Primary School
Autorzy:
Гуркова, Тетяна
Powiązania:
https://bibliotekanauki.pl/articles/16647630.pdf
Data publikacji:
2022-12-31
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
сучасні засоби навчання
початкова школа
уроки природничого циклу
метод моделювання
ЛОС (логічно опорні схеми)
натуральні об’єкти
проєкти
модельні уроки
modern teaching aids
primary school
lessons of natural cycle
modeling method
VOC (logical reference schemes)
natural objects
projects
model lessons
Opis:
An important function of education is to teach primary school students the skills and abilities to apply knowledge in life situations, preparing them for the challenges that await outside of school. In connection with the strategy, teachers acquire the mastery of innovative forms, methods, techniques and teaching in primary school. There is no traditional urgency of this problem, at the present stage it is undeniable relevance and novelty. The article is devoted to the analysis, systematization and generalization of the problem of introduction of modern teaching aids in the lessons of the natural cycle in primary school from the point of view of practice. The focus is on the formation of research and development skills in primary school students in project activities; acquaintance with scientific articles during modeling. Ability to analyze, specify and systematize information by compiling Logical Reference Schemes. The priority is given to the use of computers in modern lessons, software as an urgent and necessary requirement of the time. During the educational process, students learn to master knowledge, evaluate their own progress, put forward hypotheses, prove them, simplify, listen and hear the opinions of others. The creative, exploratory approach of primary school teachers to the choice of modern teaching aids should become an organic part of students’ learning. Methodical instructions, the algorithm of the conducted classes, types of activity are concretized by examples on which the author emphasizes practicality of the outlined means. The author provides recommendations for improving the educational process according to the current legal framework of primary school. The practical material is promising for its use by primary school teachers in the face of changes in education, provides a solid basis for the author’s search, gaining their own experience, evaluation of activities in the context of educational innovations.
Важливою функцією освіти є набуття учнями початкових класів вмінь і навичок застосування знань в життєвих ситуаціях, підготовка їх до викликів, які чекають за межами школи. У зв’язку з цим пріоритетного значення набуває оволодіння вчителями інноваційними формами, методами, прийомами та стратегіями викладання в початковій школі. Незважаючи на традиційну актуальність зазначеної проблеми, на сучасному етапі вона набуває незаперечної актуальності та новизни. Стаття присвячена аналізу, систематизації та узагальненню проблеми упровадження сучасних засобів навчання на уроках природничого циклу в початковій школі з точки зору практики. Концентрується увага на формуванні в учнів початкових класів дослідницько-пошукових вмінь і навичок у проєктній діяльності; знайомство з науковими статтями під час моделювання. Вміння аналізувати, конкретизувати та систематизувати інформацію за допомогою складання ЛОСів (логічно опорних схем). Розкривається пріоритет використання комп’ютерів на сучасному уроці, програмного забезпечення, як актуальна і необхідна вимога часу. Під час освітнього процесу учні вчаться самостійно опановувати знаннями, оцінювати власні поступи, висувати гіпотези, доводити їх, спрощувати, слухати й чути думки інших. Творчий, пошуковий підхід вчителя початкових класів щодо вибору сучасних засобів навчання є органічною частиною навчання учнів. Методичні настанови, алгоритм проведених занять, види діяльності конкретизовано прикладами, на яких автор підкреслює практичність окреслених засобів. Надає рекомендації щодо удосконалення освітнього процесу відповідно до чинної нормативно-правової бази початкової школи. Практичний матеріал є перспективним для його використання вчителями початкових класів в умовах змін в освіті, забезпечує надійне підґрунтя для авторського пошуку, набуття власного досвіду, оцінки діяльності в контексті освітніх інновацій.
Źródło:
Viae Educationis; 2022, 4; 37-43
2956-2856
Pojawia się w:
Viae Educationis
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new BEM for modeling and simulation of 3T MDD laser-generated ultrasound stress waves in FGA smart materials
Autorzy:
Fahmy, Mohamed A.
Powiązania:
https://bibliotekanauki.pl/articles/29520102.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
oundary element method
modeling and simulation
three-temperature
memory-dependent derivative
laser ultrasonic
nonlinear thermal stress waves
functionally graded anisotropic
smart materials
Opis:
The goal of this study is to present a new theory known as the three-temperature memory-dependent derivative (MDD) of ultrasound stress waves in functionally graded anisotropic (FGA) smart materials. It is extremely difficult to address the difficulties related to this theory analytically due to its severe nonlinearity. As a result, we suggest a new boundary element method (BEM) to solve such equations. The suggested BEM technique incorporates the benefits of both continuous and discrete descriptions. The numerical results are visually represented to demonstrate the impacts of MDD three temperatures and anisotropy on the ultrasound stress waves in FGA smart materials. The numerical findings verify the proposed methodology’s validity and accuracy. We may conclude that the offered results are useful for comprehending the FGA smart materials. As a result, our findings contribute to the advancement of the industrial applications of FGA smart materials.
Źródło:
Computer Methods in Materials Science; 2021, 21, 2; 95-104
2720-4081
2720-3948
Pojawia się w:
Computer Methods in Materials Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effectivity of BIM transfer of structural models between programs for engineers
Efektywność transferu BIM modeli konstrukcji pomiędzy różnymi programami inżynierskimi
Autorzy:
Kotlarz, Oskar
Wosatko, Adam
Powiązania:
https://bibliotekanauki.pl/articles/1955945.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
technologia BIM
transfer danych
interoperacyjność BIM
oprogramowanie inżynierskie
modelowanie konstrukcji
metoda elementów skończonych
BIM technology
data transfer
BIM interoperability
engineering software
structure modeling
finite element method
Opis:
The paper describes the verification of the quality of the data transfer between selected software dedicated to generation of building models and for their analysis using the finite element method. For comparison, models of two typical structures are constructed: a steel truss hall and a multi-storey reinforced concrete building. Both models are created simultaneously in two programs: Autodesk Revit and Tekla Structures. Next, these models are exported to computational packages: Autodesk Robot, Dlubal RFEM and SCIA Engineer. Different options of data transfer are considered, in particular: a direct link between programs as well as via open formats. The scope and limitations of the data exchange are determined in each case. Juxtaposition of the effectiveness of different transfer methods for such typical building models are helpful at the stage of cooperation between the architect and the structural designer. In addition, pilot results of a finite element static analysis for the steel hall model are also compared.
Artykuł opisuje weryfikację jakości transferu danych pomiędzy oprogramowaniem przeznaczonym do tworzenia modeli obiektów budowlanych i ich analizy za pomocą metody elementów skończonych. W celu porównania utworzono modele dwóch typowych konstrukcji, tj. stalowej hali kratownicowej i wielokondygnacyjnego budynku żelbetowego. Oba modele opracowano jednocześnie w dwóch programach: Autodesk Revit i Tekla Structures. Eksport modeli wykonano do pakietów obliczeniowych: Autodesk Robot, Dlubal RFEM i SCIA Engineer. Wybrano różne opcje transferu – poprzez bezpośrednie połączenia programów, ale także poprzez formaty otwarte. W każdym przypadku określono ich zakres i ograniczenia dotyczące wymiany danych. Zestawienia efektywności sposobów różnych metod transferu dla takich typowych modeli budynków pomagają na etapie kooperacji pomiędzy projektantami – architektem i konstruktorem. Dodatkowo porównano również podstawowe wyniki obliczeniowej analizy statycznej dla modelu hali stalowej.
Źródło:
Budownictwo i Architektura; 2021, 20, 3; 5-24
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of a temperature field during multi-beads surface welding
Autorzy:
Koňár, Radoslav
Mičian, Miloš
Málek, Miloslav
Šutka, Jozef
Gucwa, Marek
Winczek, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/1839860.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
modeling
welding
finite element method
weld surfacing
Sysweld
S355 steel
spawanie
metoda elementów skończonych
stal S355
symulacja numeryczna
napawanie
Opis:
The calculation results of the temperature field during multi-beads GMAW (Gas Metal Arc Welding) cladding of the S355 steel plate are presented in the paper. Numerical simulations were performed using the SysweldR program. Two of Goldak’s heat source models were chosen for calculating the temperature field for each weld bead. The original article achievement is, by selecting the right heat source model and heat loading of the finite elements, obtaining an irregular shape of the fusion zone. This irregular shape of the fusion zone is very complicated to obtain using other commercial programs for numerical welding simulation. The calculation results were verified by the dimensions (critical temperatures) of the heat affected zones (HAZ) determined in the experiment, obtaining a satisfactory agreement.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2021, 20, 1; 49-59
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantum-inspired method of neural modeling of the day-ahead market of the Polish electricity exchange
Autorzy:
Tchórzewski, Jerzy
Ruciński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/2183468.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
artificial neural networks
day-ahead market
dequantization with ANN
neural modeling
quantum inspired method
quantum computing
Polish Electricity Exchange
system quantization
Opis:
The paper presents selected elements of a modelling methodology involving quantization, quantum calculations and dequantization on the example of the neural model of the Day-Ahead Market of the Polish Electricity Exchange. Based on the fundamental assumptions of quantum computing, a new method has been proposed here of converting the real numbers in decimal notation into quantum mixed numbers using the probability modules of quantum mixed number and the principle of superposition, along with a new method of quantum calculations using linear algebra and vectormatrix calculus, and the Artificial Neural Network was taught accordingly. Dequantization of quantum mixed numbers to real numbers in decimal notation using the new method of dequantization has been proposed as well. The operation of the methods introduced was shown on numerical examples.
Źródło:
Control and Cybernetics; 2021, 50, 3; 383--399
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reservoir characterization based on the Lambda-Mu-Rho method – case study
Charakterystyka złoża oparta na metodzie Lambda-Mu-Rho – przykład analizy
Autorzy:
Kaczmarczyk-Kuszpit, Weronika
Powiązania:
https://bibliotekanauki.pl/articles/2143427.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
LMR method
Lamé parameters
elastic modulus
modeling
crossplot analysis
metoda LMR
parametry Lamégo
parametry elastyczne
modelowanie
wykres krzyżowy
Opis:
The results of analyzes based on the Lambda-Mu-Rho method, allow us to understand how the properties of a formation are related to each other, identify lithological and petrophysical variability, recognise zones of saturation with hydrocarbons, and in the next stage, to integrate these results with seismic data. Consequently, various parameters of the deposit are considered (lithological, petrophysical, geochemical, geomechanical) and their waveform response whose interrelations can be observed in different scales of observation, giving the most reliable and coherent picture of the analyzed area. The aim of the article is to present the possibility of lithological and parametric identification using the LMR method, as well as attempt to determine the sweet spot for the shale reservoir interval. Lamé parameters (λρ and μρ) analysis supports the inference regarding relations between elastic moduli and individual parameters as well as lithology and fluid discrimination. Numerous publications have confirmed the validity of applying the LMR method due to the reliability of the obtained results. In our work, several relationships between velocity of compressional (Vp) and shear (Vs) waves, density, Lambda-Rho (λρ), Mu-Rho (μρ), brittleness index (BI) and total organic content (TOC) were analyzed. The anonymous analyzing area covers five formations associated with limestones and shales rocks. This article concerns the general characteristic of these formations, including two of them which accumulate hydrocarbons from the same petroleum system. A number of dependencies between the analyzed elastic parameters as well as brittleness and organic matter content were determined, as well as a threshold value for the Vp /Vs ratio, defining the hydrocarbon accumulation zones. Finally, the analysis results were applied in the 3D model, locating the hydrocarbon accumulation zones within one of the analyzed formations.
Celem artykułu jest przedstawienie możliwości identyfikacji zmienności litologicznej i parametrycznej, a także próba wyznaczenia interwału złożowego z wykorzystaniem metody Lambda-Mu-Rho. Parametry Lamégo (lambda-rho λρ i mu-rho μρ) wspomagają proces wnioskowania dotyczącego ogólnej charakterystyki złoża, ich zastosowanie pozwala też na określenie zróżnicowania litologicznego oraz identyfikację akumulacji poszczególnych rodzajów płynów złożowych. Liczne publikacje potwierdzają słuszność zastosowania tej metody z uwagi na wiarygodność uzyskiwanych wyników. W artykule przeanalizowano kilka z szeregu znanych zależności pomiędzy prędkością fal podłużnych (Vp) i fal poprzecznych (Vs  ), parametrami Lamégo, gęstością oraz indeksem kruchości (BI) i zawartością materii organicznej (TOC). Anonimowy obszar analizy dotyczy kilku formacji litologicznych związanych ze skałami węglanowymi i łupkowymi. Niniejszy artykuł odnosi się do ogólnej charakterystyki tychże formacji na podstawie wykresów krzyżowych (crossplotów), w tym dwóch formacji gromadzących węglowodory, pochodzące z jednego systemu naftowego. Określono szereg zależności pomiędzy analizowanymi parametrami sprężystymi oraz kruchością i zawartością materii organicznej, jak również wyznaczono wartość progową dla stosunku (Vp /Vs), określającego strefy akumulacji węglowodorów. Ostatecznie wyniki analizy zaaplikowano w modelu 3D, lokalizując strefy akumulacji węglowodorów w obrębie jednej z analizowanych formacji. Wyniki analiz opartych na metodzie Lambda-Mu-Rho pozwalają zrozumieć, jak właściwości formacji są ze sobą powiązane, identyfikować zmienność litologiczną i petrofizyczną, wskazywać strefy nasyceń węglowodorami, a w kolejnym etapie umożliwiają integrację tychże wyników z danymi sejsmicznymi. W konsekwencji uwzględnione zostają różne parametry złoża (litologiczne, petrofizyczne, geochemiczne, geomechaniczne) oraz ich odpowiedź w postaci obrazu falowego, których współzależności dają się zaobserwować w odmiennych skalach obserwacji, dając możliwie wiarygodny, spójny obraz analizowanego obszaru.
Źródło:
Nafta-Gaz; 2021, 77, 10; 625-632
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The forecasting potential of adaptive models in tourism
Potencjał prognostyczny modeli adaptacyjnych w turystyce
Autorzy:
Aleksandrova, Anna
Aigina, Ekaterina
Dombrovskaya, Veronika
Powiązania:
https://bibliotekanauki.pl/articles/2032668.pdf
Data publikacji:
2021-12-31
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
prognozowanie
modele adaptacyjne
ruch turystyczny
metoda Holta-Wintersa
forecasting
adaptive modeling
tourist flows
Holt-Winters method
Opis:
The article discusses forecasting as one of the special scientific research areas which contribute to the assessment of tourist activity development prospects, the identification of key tourism development factors and effective management decision criteria. The study provides an overview of modern research methods used in Russia and other countries for making forecasts in the field of tourism. It aims at assessing the predictive capabilities of adaptive modeling, not frequently used currently in tourism research, for the quantitative analysis of tourist flows using the example of Barcelona, a major urban tourist destination in the pre-pandemic period. An example of a forecast for tourist numbers based on adaptive models is proposed, one of the key indicators showing tourist region success which have proven successful in the study of processes with a dynamic but unstable character.
Autorki omawiają prognozowanie jako szczególny obszar badań naukowych, który pomaga ocenić perspektywy rozwoju aktywności turystycznej, zidentyfikować kluczowe czynniki procesu zmian zachodzących w turyzmie oraz kryteria efektywnego zarządzania. Artykuł zawiera przegląd nowoczesnych metod badawczych stosowanych w Rosji i w innych krajach do sporządzania prognoz w dziedzinie turystyki. Celem opracowania jest ocena predyktywnych możliwości modelowania adaptacyjnego, obecnie niezbyt często stosowanego w badaniach turystycznych, do przeprowadzania ilościowej analizy ruchu turystycznego. Na podstawie danych dotyczących Barcelony – dużego miejskiego centrum turystycznego w czasach przed pandemią – opierając się na modelach adaptacyjnych, przedstawiono przykład prognozy liczby podróżnych. Jest to jeden z głównych wskaźników sukcesu turystycznego ujawnionego w trakcie badania procesów o dynamicznym, lecz niestałym charakterze.
Źródło:
Turyzm; 2021, 31, 2; 181-196
0867-5856
2080-6922
Pojawia się w:
Turyzm
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Building of calculation model and strength analysis by using finite element method on example of mold to foaming of cooling furniture
Budowa modelu obliczeniowego i analizy wytrzymałościowe przy użyciu metody elementów skończonych na przykładzie formy do spieniania mebli chłodniczych
Autorzy:
Ignasiak, Łukasz
Woźniak, Paweł
Bieńczak, Agata
Powiązania:
https://bibliotekanauki.pl/articles/334713.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
Finite Elements Method
FEM modeling
FEA
CAE
strength
structural analysis
mold
cooling furniture
forming machine
foaming
Metoda Elementów Skończonych
modelowanie MES
wytrzymałość
analiza strukturalna
forma
meble chłodnicze
maszyna do formowania
spienianie
Opis:
The article presents the way of creating calculation model of mold to foaming of cooling furniture for needs of conducting strength analysis by using Finite Element Method. The method of creating model is described in detail taking into account of modeling techniques available in NX system, the division of model into finite elements (discretization) by using threedimensional, two-dimensional, one-dimensional elements was visualized. Finally, the results of numerical simulations in the form of stresses distribution in areas of considerable straining of structure was presented.
W artykule przedstawiono sposób tworzenia modelu obliczeniowego formy do spieniania mebli chłodniczych dla potrzeb przeprowadzenia analiz wytrzymałościowych przy wykorzystaniu Metody Elementów Skończonych. Szczegółowo opisano metodę kreowania modelu z uwzględnieniem technik modelowania dostępnych w systemie NX, zobrazowano podział modelu na elementy skończone (dyskretyzację) przy wykorzystaniu elementów trójwymiarowych, dwuwymiarowych oraz jednowymiarowych. Przedstawiono wyniki z przeprowadzonych symulacji numerycznych w postaci rozkładu naprężeń w obszarach o znacznym wytężeniu.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2020, 65, 1; 4-8
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ES-QUAL model and customer satisfaction in online banking: evidence from multivariate analysis techniques
Autorzy:
Ahmed, Rizwan Raheem
Romeika, Giedrius
Kauliene, Raimonda
Streimikis, Justas
Dapkus, Rimantas
Powiązania:
https://bibliotekanauki.pl/articles/19233490.pdf
Data publikacji:
2020
Wydawca:
Instytut Badań Gospodarczych
Tematy:
ES-QUAL model
customer satisfaction
financial performance
Internet banking
normal theory method
bootstrapping method
Structural Equation Modeling
SEM
Opis:
Research background: The commercial banks are adopting online services for their transactions to stay competitive and fulfill the customers' needs. There is a dire need to satisfy online customers in a competitive environment. Thus, this paper employed the ES-QUAL model and two mediating variables and outlined the recommendations to the management of the online banking industry to develop effective strategies. Purpose of the article: The undertaken research aimed to examine the electronic banking service quality and customer satisfaction. For this purpose, we employed the ES-QUAL model and examined the direct impact of ES-QUAL dimensions and customer's satisfaction. The secondary task of this paper is to investigate the mediation effect of customer's trust and the perceived value in an association between the ES-QUAL model and customer satisfaction. Finally, we examine and check whether customer satisfaction translates into the business performance of commercial banks or not. Methods: To achieve the overall goal of this research, SEM-based multivariate approach has been used, including confirmatory factor analysis, exploratory factor analysis, and multiple approaches (normal theory, and bootstrapping) to examine the moderation between the exogenous and endogenous variables. For the validation of hypotheses and results, a financial analysis has been performed simultaneously with the primary analysis. The research is done for a sample of 910 respondents of the account holders of five top commercial banks of Pakistan. Findings & Value added: The outcomes of the direct investigation revealed an affirmative, and potent impact of ES-QUAL dimensions on customer's satisfaction. The outcomes of the indirect relationship exhibited that the perceived value and trust mediate ES-QUAL dimensions and customer satisfaction. The secondary data of selected five commercial banks and ratios analysis validated the results of the ES-QUAL model, and it is concluded that the results are linear with the outcomes of customers' satisfaction of primary analysis.
Źródło:
Oeconomia Copernicana; 2020, 11, 1; 59-93
2083-1277
Pojawia się w:
Oeconomia Copernicana
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling Process of Planning Finished Product Sales Volumes at Industrial Enterprises in Modern Economic Conditions
Modelowanie procesu planowania sprzedaży wyrobów gotowych w przedsiębiorstwach przemysłowych
Autorzy:
Udachyna, Kateryna
Rizun, Nina
Savchuk, Larysa
Powiązania:
https://bibliotekanauki.pl/articles/1819742.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska
Tematy:
plan
finished products
realization
forecast
Holt method
modeling
wyroby gotowe
realizacja
prognoza
metoda Holta
modelowanie
Opis:
This article presents improving the existing system of planning finished products sales volumes. The influencing factors of the sales volumes in modern economic conditions have been determined: falling world oil prices, the reduction of pipe consumption in the domestic market, the global pandemic. The algorithm of planning finished products sales volumes has been constructed. Calculations based on the Holt forecasting method has been done, which allows to make forecast with trend. Calculations based on real data have been conducted, the model has been adapted to modern pandemic conditions, and impact factors have been identified. The plan of finished products sales volumes with factors of influence has been made. Forecast results obtained have been corrected and presented on periods and on markets. System of planning finished product sales volumes at industrial enterprises in modern economic conditions has been improved.
W artykule zaproponowano usprawnienie istniejącego systemu planowania sprzedaży wyrobów gotowych. Określane są czynniki wpływające na wielkość sprzedaży we współczesnych warunkach ekonomicznych: spadek światowych cen ropy naftowej, zmniejszenie zużycia rur na rynku krajowym, globalna pandemia. Konstruowany jest algorytm planowania wielkości realizacji wyrobów gotowych. Obliczenia dokonywane są w oparciu o metodę prognozowania Holta, która pozwala na wykonanie prognozy z uwzględnieniem trendu. Przeprowadzono obliczenia na podstawie rzeczywistych danych, model dostosowano do współczesnych warunków pandemii i zidentyfikowano czynniki wpływu. Sporządza się plan wielkości produkcji z uwzględnieniem czynników wpływu, koryguje otrzymane prognozy oraz przedstawia wyniki okresowe i według rynków. Usprawniono system planowania wolumenów sprzedaży wyrobów gotowych w przedsiębiorstwach przemysłowych w nowoczesnych warunkach ekonomicznych.
Źródło:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka; 2020, 2, 31; 39-49
2084-6495
Pojawia się w:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimum location of last-mined stope with the influence of backfilling
Autorzy:
Xu, Huawei
Apel, Derek B.
Powiązania:
https://bibliotekanauki.pl/articles/1839033.pdf
Data publikacji:
2020
Wydawca:
Główny Instytut Górnictwa
Tematy:
backfill
sublevel stoping method
numerical modeling
zasypka
metoda podpoziomowa
modelowanie numeryczne
Opis:
Many mines in Canada have adopted sublevel stoping method or one of its variations, such as blasthole stoping (BHS) and sublevel longhole retreat (SLR), for the extraction of steeply dipping orebodies. Stope, as the basic excavated element, plays a significant role in the whole process of mining activity. In the mining method of BHS, crossing cuts are excavated at tops and bottoms in each stope for drilling blast holes and transportation of mined out orebodies. Crossing cuts failure may result in prolonged production interruption, fatality, and equipment loss. After the completion of orebodies excavation from the sublevel open stope, the void stopes will be backfilled with cemented rockfill (CRF) for secondary stopes. The strength of the CRF affects the stability of the adjacent crossing cuts for the next excavation scheme. Rational location of the last mined stope can effectively eliminate the instability of crossing cuts. By using the Finite Element Method (FEM) such as Abaqus codes in this study, this paper presents the comparison of floor heaves, roof displacements, and sidewall swellings of the crossing cuts in each stopes of different location scenarios. The numerical simulation shows that the central stope location of the level is the optimum one for the last mined stope.
Źródło:
Journal of Sustainable Mining; 2020, 19, 4; 212-220
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies