Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "membrane separation" wg kryterium: Temat


Tytuł:
Możliwości zastosowania procesów adsorpcyjnych i membranowych do zatężania metanu pochodzącego z powietrza wentylacyjnego kopalń
Adsorption and membrane processes for the enrichment of methane in mine ventilation air
Autorzy:
Tańczyk, Marek
Janusz-Cygan, Aleksandra
Pawlaczyk-Kurek, Anna
Jaschik, Jolanta
Wojdyła, Artur
Sołtys, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/27324063.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
metan z powietrza wentylacyjnego kopalń
adsorpcja zmiennociśnieniowa
separacja membranowa
ventilation air methane (VAM)
pressure swing adsorption
membrane separation
Opis:
Przeprowadzono analizę metod adsorpcyjnych i membranowych pod kątem zatężania metanu w powietrzu wentylacyjnym kopalń (VAM). Stwierdzono, że możliwe jest zwiększenie stężenia VAM z 0,2-0,3% obj. do co najmniej 1% obj. przy wykorzystaniu obu technik separacyjnych, co powinno ułatwić jego utylizację w reaktorach rewersyjnych lub silnikach na paliwo ubogie.
Technologies for thermal utilization of ventilation air methane (VAM) require stabilization and/or increasing its concentration. This paper summarizes the results of research conducted at the IICh PAS in the area of adsorption and membrane processes for VAM enrichment. First of all adsorbents and membrane materials were selected and investigated for such processes. They were assessed in terms of CH4/N2 selectivity, as defined by Eqs 1 and 2, as well as adsorption capacity (adsorbents) and permeability (membranes). The properties of activated carbons and ZMS 5A investigated were presented in Table 1 and Fig. 1. In the case of membranes polyimide membranes, used in commercial UMS-A5 and CO-C05 UBE modules, as well as the Matrimid 5218/CMS composite membrane, were selected for membrane VAM enrichment process. The pressure swing adsorption process in two-bed (Fig. 2) and four-bed (Fig. 4) installations for VAM enrichment was also investigated. The process performance was presented in Fig. 3 and Figs 5-6, respectively. It has been found that in the case of the four-bed process with activated carbon G2X7/12 Takeda VAM can be enriched from 0.2 to over 1.2 vol.% with a recovery of at least 80%. The results of membrane VAM enrichment processes were summarized in Table 2. It was found that in the case of commercially available UBE modules UMS-A5 and CO-C05 the concentration of methane in VAM can be increased from 0.3 to 0.43 vol.% with moderate CH4 recovery (50-60%). Higher enrichment (up to 1,8 vol.% in a three-stage system) can be obtained in the case of the hybrid Matrimid 5218/CMS. For an assessment of the energy efficiency of the PSA and membrane enrichment processes two factors were defined: the unit power necessary to generate the pressure ratio pW/pN in the separation process (Eq. 3) and the unit heat output of the ventilation air (Eq. 4). These factors were presented in Fig. 7 along with unit thermal power of the enriched gas for the membrane (triangles) and adsorption (diamonds) VAM enrichment processes. It was found that regardless of the separation method and process parameters, the potential energy gain from the utilization of enriched VAM is much lower than the energy expenditure related to the implementation of the enrichment process, which is primarily due to the low unit thermal power of the ventilation air.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2022, 26; 17--36
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regeneration of polymer and ceramic modules with the use of recovered single-phase detergent. Dairy industry case study
Autorzy:
Kowalska, Izabela
Powiązania:
https://bibliotekanauki.pl/articles/2171848.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dairy industry
membrane separation
dairy wastewater
membrane technology
przemysł mleczarski
separacja membranowa
ścieki mleczarskie
technologia membranowa
Opis:
The effectiveness of recovered washing compositions containing single-phase detergents from cleaning-in-place (CIP) systems as solutions for the regeneration of membrane modules fouled during the filtration of wastewater from the prerinsing of the production line (white water) was assessed. The influence of process parameters (regeneration time, transmembrane pressure, cross-flow velocity, and solution temperature) on relative flux recovery was evaluated. A significantly higher regeneration efficiency of the ceramic and polymeric modules was obtained for the alkaline detergent compared to that of the acid formula. The key process parameters for the regeneration cycle were the contact time of the module with the cleaning detergent and its temperature. The influence of transmembrane pressure and cross-flow velocity on module permeability was negligible. Filtration experiments with white water confirmed that the membrane separation process is suitable for the recovery of milk compounds from dairy effluents.
Źródło:
Environment Protection Engineering; 2022, 48, 4; 85--96
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of carbon footprint from spark ignition power facilities by the dual approach
Autorzy:
Janusz-Szymańska, Katarzyna
Grzywnowicz, Krzysztof
Wiciak, Grzegorz
Remiorz, Leszek
Powiązania:
https://bibliotekanauki.pl/articles/1845486.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
spark ignition engines
digestion
gas
cofiring
CO2 emissions
membrane
separation
Opis:
Power generation units, suitable for individual users and small scale applications, are mainly based on spark ignition engines. In recently performed research, reductions of emissions coming from such units, especially considering carbon dioxide emissions, are deemed as the issue of particular importance. One of solutions, postponed to reduce impact of spark ignition engine-based units on the natural environment, is transition from fossil fuels into renewable gaseous fuels, as products of organic digestion. Nonetheless, development of new solutions is required to prevent further carbon dioxide emissions. The paper presents a novel dual approach developed to reduce carbon dioxide emissions from stationary power units, basing on spark ignition engine. The discussed approach includes both reduction in carbon content in the fuel, which is realized by its enrichment with hydrogen produced using the solar energy-supported electrolysis process, as well as application of post-combustion carbon dioxide separation. Results of the performed analysis suggest profitability of transition from fossil into the hydrogen-enriched fuel mixture, with significant rise in operational parameters of the system following increase in the hydrogen content. Nevertheless, utilization of the carbon dioxide separation leads to vital soar in internal energy demand, causing vital loss in operational and economical parameters of the analyzed system.
Źródło:
Archives of Thermodynamics; 2021, 42, 2; 171-192
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie koncepcji uzyskiwania strumieni gazu o podwyższonej zawartości helu na membranach
Development of the concept of obtaining gas streams on membranes with increased helium content
Autorzy:
Janocha, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1834061.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
separacja membranowa
hel
gaz ziemny
membrane separation
helium
natural gas
Opis:
Due to the constantly rising helium prices, resulting from the shrinking supply, reserves of helium from niche sources, including those of low quality, will become attractive. Conventional helium production technologies are energy-consuming and were designed for large streams to process (recover) helium from natural gas. Alternative technologies, e.g. using membrane separation, are being more and more often explored because of the economic benefits they can potentially have over the conventional approach. This article reviews the literature on the technologies used for membrane separation of helium from natural gas. The project was developed and a test stand was created for separation tests on membrane modules of gas mixtures with different helium content. Several series of studies were carried out with interpretation of the results of experimental dependence of the effects of helium permeate enrichment on stage cut. Simulations and calculations of the size of streams were carried out in a multi-stage helium separation system from natural gas as a function of stage cuts with retentate streams being recycled to earlier stages of separation. The concept of obtaining natural gas containing 0.3% helium gas stream with high helium content – over 90% – using membrane technology was developed. The tests were carried out on a commercially available polyimide membrane. The subsequent stages of enrichment of the gas stream in helium, 1.3, 8, 37 and over 93% helium in the final concentrate were obtained. In the high-pressure retentate stream, a helium-free product (<0.02%) was obtained which was also a gas with increased calorific value with a reduced content of carbon dioxide and nitrogen. During the experiments, a lot of effort was put into making the results broadly useful in process calculations. The general simulation problem of flow shaping (stream sizes) for a four-stage gas enrichment system on membranes has been solved. The calculation results can serve many variants depending on the flow and on stage cut Ѳ. The influence of permeate throttling pressure on separation effects was determined and the optimal range of this pressure was determined taking into account the need to compress this stream. The engineering calculations carried out for one of the variants showed the effectiveness and the possibility of its implementation. After each separation stage (degree), the permeate must be compressed again, which entails specific operating expenses related to the energy costs for compressing and cooling individual gas streams. The required power for compressing and cooling these streams was calculated.
Źródło:
Nafta-Gaz; 2020, 76, 10; 719-727
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja siarkowodoru z gazu ziemnego w kaskadowych układach technologii membranowej
Separation of hydrogen sulphide from natural gas in cascade systems of membrane technology
Autorzy:
Janocha, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1833995.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
moduły membranowe
separacja gazowa
siarkowodór
gaz ziemny
membrane modules
gas separation
hydrogen sulphide
natural gas
Opis:
Under the new economic conditions, the exploitation of sour gas deposits reduces profits when using the conventional processes used to prepare gas for transport. Adding an inexpensive membrane unit as a preliminary technology before the classic quite energyconsuming amine absorption process (hybridization) can significantly reduce the cost of removing acidic components from natural gas. The article is a continuation of the author’s previous publications related to the research on the separation of several CH4–H2S mixtures. Gaseous separation tests were carried out on modules with polyimide membranes in a wide range of pressures. The scope of the conducted separation tests was extended to concentrations of 22% H2S in the gas mixture. Based on the experimental results, data for simulations and forecasts necessary for the evaluation and comparison of two-module cascade systems were obtained. The influence of the pressure of the gas flowing through the membrane (permeate) on the separation effects was determined. Increasing the pressure of the permeate flux reduces the concentration of hydrogen sulphide in it and increases the loss of methane. It was found that the ratio of the inlet gas pressure to the permeate pressure is of greater importance than the pressure difference. Single-stage membrane systems are sufficient for gas containing more than 12% H2S, for less sulfurized gases a two-stage cascade system is suggested. In the case of low concentrations of H2S in the gas, the methane losses in the one-stage system are too high. The article compares two variants of two-module cascade membrane systems. The paper presents comparative results of hydrogen sulphide content in simulation calculations for inlet gas with a concentration of 7.73% for both systems with a compressor before and after the second separation stage. The calculations showed that for the variant with the compressor before the second modulus, the H2S concentrations in the product streams are more favourable. H2S removal rates from the inlet gas were calculated for both systems. The influence of the permeate composition on the phase phenomena related to their condensation and compression for injection into the bed together with the acid gas from the amine part of the hybrid installation was considered.
Źródło:
Nafta-Gaz; 2020, 76, 12; 935--943
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of sonication and stirring on ultrafiltration of fermentation broth
Autorzy:
Lemmer, Balázs
Jákói, Zoltán
Gulyás, Nikolett
Kertész, Szabolcs
Beszédes, Sándor
László, Zsuzsanna
Hodúr, Cecilia
Powiązania:
https://bibliotekanauki.pl/articles/207543.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sonication
fermentation broth
membrane separation
sonifikacja
brzeczka fermentacyjna
separacja membranowa
Opis:
Membrane separation is a widely used technique whose main obstacle is membrane fouling, during which a solution or particles accumulate on the membrane surface or inside its pores. This phenomenon causes both reversible and irreversible flow resistances that can be minimized with complementary techniques such as sonication and/or stirring. The application of ultrasonic energy can increase the flux by breaking the concentration polarization and cake layer on the membrane surface without affecting the intrinsic permeability of the membrane. Our work focused on cellulase and β-glucosidase enzyme recovery through sonicated/stirred ultrafiltration from the real fermentation broth, at which the fermentation liquid was produced from tobacco plants. Membrane filtrations were carried out in a laboratory-grade batch ultrafiltration cell, extended with stirrer and ultrasound processor. The effects of stirring speed and ultrasound treatment were investigated on the membrane’s permeate flux efficiency and on the quality of recycled enzymes. Resistance values were calculated by the resistance-in-series model, as well as by Hermia’s analysis, to reveal deeper, process-related information. Our results revealed that enzymes could be efficiently separated from real fermentation broth. Furthermore, the enzyme activity test showed that neither stirred nor sonicated processes were detrimental to the enzyme activity.
Źródło:
Environment Protection Engineering; 2020, 46, 1; 49-62
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie separacji membranowej do uzdatniania biogazu
The biogas upgrading by membrane separation
Autorzy:
Janusz-Cygan, Aleksandra
Tańczyk, Marek
Jaschik, Jolanta
Wojdyła, Artur
Sołtys, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/1955369.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
separacja membranowa
biogaz
biometan
membrane separation
biogas
biomethane
Opis:
Przeprowadzono analizę możliwości zatężania metanu pochodzącego z syntetycznych mieszanin gazowych o składzie zbliżonym do biogazu w komercyjnym module membranowym firmy Air Products. Przeprowadzono doświadczalne badania procesu permeacji czystego metanu i ditlenku węgla oraz badania separacji mieszanin CH4/CO2 zawierających 50 lub 60% obj. CH4. W wyniku przeprowadzonych badań stwierdzono, że moduł ten można zastosować do uzdatniania biogazu do biometanu.
An analysis was carried out of the possibility of concentrating methane from a synthetic biogas in an Air Products membrane module. Experimental investigations concerning the permeation of pure gases and mixture of these gases containing 50 and 60 vol.% of methane and carbon dioxide, were carried out. An important conclusion from the investigationt is that this module can be used for the upgrading of biogas to biomethane.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2020, 24; 83-94
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza przydatności materiałów membranowych do procesu zatężania metanu z powietrza wentylacyjnego kopalń
The analysis of the suitability of membrane materials for the enrichment of methane from ventilation air
Autorzy:
Janusz-Cygan, Aleksandra
Tańczyk, Marek
Jaschik, Manfred
Jaschik, Jolanta
Wojdyła, Artur
Sołtys, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/306064.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
metan z powietrza wentylacyjnego kopalń (VAM)
separacja membranowa
membrany polimerowe
membrany nieorganiczne
membrany MMMs
ventilation air methane (VAM)
membrane separation
polymeric membranes
inorganic membranes
MMMs membranes
Opis:
Przeprowadzono analizę możliwości wykorzystania istniejących materiałów membranowych na potrzeby separacji metanu zawartego w mieszaninach gazowych. Wytypowano grupę materiałów, które potencjalnie można zastosować do procesów zatężania metanu z powietrza wentylacyjnego kopalń. Przeprowadzono także obliczenia symulacyjne procesu permeacji dla jednej wytypowanej membrany. Stwierdzono, że w procesie membranowym, wykorzystującym taką membranę, można uzyskać gaz wzbogacony o stężeniu metanu co najmniej 0,5%, które jest wystarczające z punktu widzenia produkcji użytecznego ciepła w autotermicznym reaktorze rewersyjnym.
An analysis of the possibilities of using existing membrane materials for the separation of methane contained gas mixtures was carried out. A group of materials was selected that could potentially be used for the recovery of methane from mine ventilation air. Simulation of the permeation process for the selected membrane were also carried out. It was found that in such a process the enriched stream containing at least 0.5 vol% of methane can be produced, which should ensure the heat recovery when fed to a thermal reverse-flow reactor.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2019, 23; 7-22
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania separacji siarkowodoru z gazu zasiarczonego przy różnych konfiguracjach modułów membranowych
Investigation of hydrogen sulphide separation from sour gas at various configurations of membrane modules
Autorzy:
Janocha, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1835016.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
moduły membranowe
separacja gazowa
siarkowodór
gaz ziemny
membrane modules
gas separation
hydrogen sulphide
natural gas
Opis:
W artykule zawarto studium przypadku zastosowania dwustopniowych układów membranowych w technologii separacji siarkowodoru z gazu. Zaprojektowano laboratoryjną instalację ciśnieniową, dostosowując ją do prowadzenia testów z dwoma modułami membranowym. Testy wykonano na mieszance wzorcowej o stężeniu 7,73% H2S w metanie przy różnych stosunkach przepływu permeatu do nadawy dla różnych konfiguracji modułów membranowych. Testy prowadzono w układzie jednomodułowym i w układach dwumodułowych w konfiguracji szeregowej i kaskadowej. Przedstawiono równania bilansowe charakteryzujące poszczególne układy modułowe. Obliczono i zbilansowano stężenia i przepływy strumieni pośrednich oraz produktowych w zależności od przepływu i współczynnika podziału. Stwierdzono, że moduły różnią się przepuszczalnością i selektywnością. Symulowano zawracanie sprężonych części strumieni produktowych o stężeniu równym nadawie w warunkach pomiarowych badanych modułów dla układu szeregowego i kaskadowego. W konfiguracji szeregowej dla ciśnienia 60 bar współczynniki podziału wynosiły odpowiednio: Ѳ1 = 0,15; Ѳ2 = 0,52. W konfiguracji kaskadowej ciśnienia wlotowe na moduły wynosiły 76 bar i 16 bar, a współczynnik podziału Ѳ1 = 0,11; Ѳ2 = 0,37. Stopień usunięcia H2S ze strumienia gazu wlotowego w układzie szeregowym jest wyższy (74%) niż w układzie kaskadowym (25%). Straty metanu w układzie szeregowym wynoszą 23% i są znacznie wyższe niż w układzie kaskadowym, w którym ubytek metanu wynosił 2,2%. Wypracowana metoda symulacji i prognoz na podstawie testów eksperymentalnych na membranach mieszanin CH4 – H2S umożliwi uzyskanie danych niezbędnych do praktycznego zastosowania technologii membranowej, w tym w hybrydowych procesach odsiarczania gazu ziemnego. Praca wykazała możliwość wykorzystania technologii membranowej do odsiarczania gazu ziemnego. Wyniki testów wykazały możliwość znaczących zmian w składach strumieni produktowych w prowadzonym procesie separacji membranowej.
The article contains a case study of the use of two-stage membrane systems in the technology of hydrogen sulphide separation from gas. A laboratory pressure system was designed to be used for testing with two membrane modules. The tests were carried out on a standard mixture with a concentration of 7.73% H2S in methane, at different permeate flow rates for feed for various membrane modules configurations. The tests were carried out in a one-module system and in two-module systems in a serial and cascade configuration. The concentrations and flows of intermediate and product streams were calculated and balanced, depending on the flow and stage cut. It was found, that the modules differ in their permeability and selectivity. The recycle of compressed parts of product streams at a concentration equal to the feed in the measurement conditions of the tested modules for the serial and cascade systems was simulated. Balance equations characteristic for individual modular systems were presented. Concentrations and flows of streams (intermediate and products) were calculated and balanced depending on the flow and partition coefficient. It was found that the tested modules displayed differences in their permeability and selectivity. The recycle of compressed parts of product streams at a concentration equal to the feed were simulated. Simulations were done for the measurement conditions of the tested modules and for the serial and cascade systems. In the serial configuration, for 60 bar inlet pressure, the value of partition coefficients Ѳ1 and Ѳ2 were 0.15 and 0.52 respectively. In the cascade configuration (inlet pressure for module 1st was 76 bar and for 2nd 16 bar) the partition coefficients were equal Ѳ1 = 0.11, Ѳ2 = 0.37. The degree of H2S removal from the feed gas stream in the serial system was higher (74%) than in the cascade system (25%). Methane loss in the serial system was 23%, and it was much higher than in the cascade system (2.2%). The developed method of simulations and forecasts based on experimental tests on CH4 – H2S mixtures membranes will enable obtaining data necessary for the practical application of membrane technology, including hybrid processes of natural gas desulfurization. The work showed the possibility of using membrane technology for natural gas desulfurization. The test results showed the possibility of significant changes in the composition of product streams the membrane separation process.
Źródło:
Nafta-Gaz; 2019, 75, 4; 222-229
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon dioxide separation technologies
Technologie separacji dwutlenku węgla
Autorzy:
Czarnota, Robert
Knapik, Ewa
Wojnarowski, Paweł
Janiga, Damian
Stopa, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/219359.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wychwyt CO2
technologia membran
absorpcja
separacja kriogeniczna
CO2 capture
membrane technology
absorption
cryogenic separation
Opis:
CO2 emission from combustion fossil fuels is considered as the primary factor in the global warming. Different methods for separation CO2 from combustion flue gases are extensively used across the world. The aim of this study is to analyze the most important technological solutions of CO2 separation. For this reason chemical absorption, physical absorption, adsorption approach, membrane filtration and cryogenic process were researched. Concluding, selection of the right method for carbon dioxide capture separation is a complex issue and a range of technological and economic factors should be taken into consideration prior to application on the industrial scale.
Emisja CO2 do atmosfery pochodząca ze spalania paliw kopalnych jest uważana za główny czynnik globalnego ocieplenia. Różne metody oddzielania CO2 od gazów spalinowych są szeroko stosowane na ca-łym świecie. Celem niniejszego artykułu jest analiza najważniejszych technologicznych rozwiązań separacji CO2. W tym celu przeanalizowano następujące metody: absorpcja chemiczna, absorpcja fizyczna, adsorpcja, filtracja membranowa i proces kriogeniczny. Podsumowując, wybór właściwej metody separacji dwutlenku węgla pod kątem wychwytu dwutlenku węgla jest złożonym zagadnieniem, a przed zastosowaniem na skalę przemysłową należy wziąć pod uwagę szereg czynników, w tym technologiczne i ekonomiczne.
Źródło:
Archives of Mining Sciences; 2019, 64, 3; 487-498
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka i metody zagospodarowania masy pofermentacyjnej powstającej w biogazowniach
Characteristics and management methods of digestate from biogas plants
Autorzy:
Urbanowska, Agnieszka
Kotas, Paulina
Kabsch-Korbutowicz, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/237452.pdf
Data publikacji:
2019
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
fermentacja metanowa
biogazownia
pozostałość pofermentacyjna
masa pofermentacyjna
odzyskiwanie wody
odzyskiwanie substancji odżywczych
rozdzielanie
procesy membranowe
methane fermentation
biogas plant
fermentation residue
digestate
water recovery
nutrient recovery
separation
membrane processes
Opis:
Poszukiwanie nowych źródeł czystej energii będzie powodować wzrost liczby biogazowni, a przez to ilości powstających w nich odpadów w postaci masy pofermentacyjnej. Dodatkowo proces fermentacji metanowej jest coraz częściej stosowaną metodą przeróbki frakcji organicznej odpadów komunalnych oraz osadów powstających w oczyszczalniach ścieków. Przetwarzanie, magazynowanie oraz transport ciekłego odpadu, jakim jest pozostałość pofermentacyjna, powstającego w biogazowniach przysparza wielu problemów, których zlekceważenie prowadzić będzie nie tylko do strat ekonomicznych, a także do degradacji środowiska. W pracy scharakteryzowano racjonalne metody zagospodarowania masy pofermentacyjnej powstającej w biogazowniach, poprzez odzyskiwanie z niej wody oraz substancji odżywczych, które mogą być wykorzystane rolniczo, bez potrzeby ich magazynowania. Ze względu na postępujący deficyt wody w rolnictwie, coraz częściej masę pofermentacyjną zaczyna się traktować nie tylko jako alternatywny nawóz, ale także jako potencjalne źródło wody. Zastosowanie odzyskanej wody do nawadniania upraw wymaga takiego jej oczyszczenia, aby zanieczyszczenia pochodzące z fermentowanej biomasy nie powracały do środowiska. Obiecujące rezultaty w tym zakresie mogą zapewnić procesy membranowe.
The quest for new clean energy sources will result in growing numbers of biogas plants and, as an implication, rising amount of waste produced in the form of a digestate. Additionally, methane fermentation becomes a growingly popular treatment method of the organic fraction of both municipal waste as well as the precipitate from wastewater treatment plants. Treatment, storage, and transport of liquid waste, such as digestate from biogas plants involve numerous challenges. Not only may ignoring them lead to economic losses but also it may cause environmental degradation. The paper discusses efficient methods for digestate management through recovery of water and nutrients that can be then utilized in the agriculture thus eliminating the temporary storage requirement. Due to increasing water deficit in agriculture, the digestate often serves not only as an alternative fertilizer but also as a source of water. Application of the reclaimed water to crop irrigation requires its proper treatment preventing contaminants from coming back to the environment. Membrane processes could deliver promising results here.
Źródło:
Ochrona Środowiska; 2019, 41, 1; 39-45
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrane gas separation module with pulsed retentate for low-permeable component recovery
Autorzy:
Battalov, Stanislav V.
Trubyanov, Maxim M.
Puzanov, Egor S.
Sazanova, Tatyana S.
Drozdov, Pavel N
Vorotyntsev, Ilya V.
Powiązania:
https://bibliotekanauki.pl/articles/185429.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
membrane gas separation
unsteady-state operation
process intensification
separation
efficiency
membrane module
separacja gazów membranowych
operacja niestabilna
intensyfikacja procesu
separacja
wydajność
moduł membranowy
Opis:
The paper presents the experimentalstudy of a novel unsteady-statemembrane gas separation approachfor recovery of a slow-permeant component in the membrane module with periodical retentate with-drawals. The case study consisted in the separation of binary test mixtures based on the fast-permeantmain component (N2O, C2H2) and the slow-permeant impurity (1% vol. of N2)using a radial counter-current membrane module. The novel semi-batch withdrawal technique was shown to intensify theseparation process and provide up to 40% increase in separation efficiency compared to a steady-stateoperation of the same productivity.
Źródło:
Chemical and Process Engineering; 2019, 40, 1; 57--65
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Cobalt ions from Wastewater by Batch and flowing Forward Osmosis Processes
Autorzy:
Hussein, Tamara Kawther
Powiązania:
https://bibliotekanauki.pl/articles/124436.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
heavy metal
wastewater
potassium chloride
forward osmosis
membrane separation
Opis:
This study was focused on forward osmosis batch and forward osmosis flowing processes to remove heavy metal (Co+2 ions) from wastewater. Cellulose triacetate (CTA) membrane was used as flat sheet for forward osmosis process. Potassium chloride KCl with different concentrations was used as draw solutions. The experimental work was divided into two parts. Forward osmosis flowing process as first part, was discussed under different operating parameters studied, such as the concentration of draw solutions 10–20 g/l, concentration of feed solutions 15–150 mg/l, temperature of feed and draw solutions 20–50 ºC, pH of feed solution from 2 to 10, feed and draw flow rate were maintained at 50 l/h, and pressure was maintained at 0.25 bar gauge. Forward osmosis batch process as second part, was discussed under different operating parameters, such as the concentration of draw solutions 10–120 g/l, concentration of feed solutions 15–150 mg/l, temperature of feed and draw solutions 20–50 ºC, and pH of feed solution from 2 to 10. The results showed that the water flux increased along with the draw solution concentration, and temperature of feed and draw solutions and decreased with the increasing operating time of experiment, concentration and pH of feed solution. The value of rejection efficiency after 4hrs reached 81.19% for the FO flowing process and 73.19% for the FO batch process.
Źródło:
Journal of Ecological Engineering; 2019, 20, 4; 121-126
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie przebiegiem procesu separacji membranowej z wykorzystaniem zjawiska termoakustycznego
Autorzy:
Grzywnowicz, Krzysztof
Wiciak, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/305119.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo Druk-Art
Tematy:
separacja membranowa
ochrona środowiska
zjawisko termoakustyczne
membrane separation
environmental protection
thermoacoustic phenomenon
Opis:
Jedną z powszechnie stosowanych technologii separacji gazów, zwłaszcza w obszarze inżynierii procesowej i energetyki, jest separacja membranowa. W artykule podsumowano obecnie oferowane sposoby kontroli parametrów procesowych membranowej separacji gazów oraz przedstawiono metodę, wykorzystującą zjawisko termoakustyczne. Ponadto zaprezentowano przykład modułu membranowego, zawierającego membranę polimerową kapilarną, wykorzystującego omawianą metodę.
One of commonly applied separation technologies, especially in the field of process engineering and power and heat industry, is membrane separation. In the paper, currently available methods of control of the process parameters are briefly discussed and the innovative method of control, involving utilization of a thermoacoustic phenomenon, is presented. Furthermore, the example of membrane module, including capillary polymer membrane and using the mentioned method, is described.
Źródło:
Napędy i Sterowanie; 2019, 21, 4; 98-102
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative Solutions to Optimalisation of the Gassing-up Operation After Tanks Inerting Using Pressure Swing Adsorption (PSA) and Membrane Techniques
Alternatywne rozwiązania dla optymalizacji procesu zagazowania zbiorników ładunkowych po inertowaniu w odniesieniu do PSA (Pressure Swing Adsorption) i technologii membranowej
Autorzy:
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/342015.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydawnictwo Uniwersytetu Morskiego w Gdyni
Tematy:
gas separation
pressure swing adsorption
membrane technology
nitrogenethylene composition
separacja gazów
technologia membranowa
mieszanina azot-etylen
Opis:
The article constitutes the introduction to finding a solution to a problem concerning carrying gassing-up operation in a more efficient way in terms of loosing ethylene cargo. To begin with, the impact of nitrogen presence on ethylene cascade cycle’s technical work and cooling capacity has been described. Further, the results of investigation into methods of nitrogen removing from cargo tanks after gassing-up have been presented. Possibility of pressure swing adsorption (PSA) and membrane techniques use has been analyzed with reference to ethylene carriers.
Artykuł stanowi wprowadzenie do rozwiązania problemu przeprowadzenia operacji gassing-up w sposób bardziej efektywny w odniesieniu do znacznych ilości „traconego” ładunku. W pierwszej kolejności opisano wpływ obecności azotu na pracę obiegu. W dalszej części przeanalizowano dostępne metody usunięcia azotu podczas operacji gassing-up. Opisano metody PSA (Pressure Swing Adsorption) oraz membrany i przeanalizowano je w odniesieniu do etylenowców.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Gdyni; 2018, 105; 136-144
1644-1818
2451-2486
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Gdyni
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies