Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "liquid-liquid extraction" wg kryterium: Temat


Tytuł:
Determination of chloramphenicol in milk powder using liquid-liquid cartridge extraction (Chem Elut) and liquid chromatography-tandem mass spectrometry
Autorzy:
Zawadzka, I.
Rodziewicz, L.
Powiązania:
https://bibliotekanauki.pl/articles/876762.pdf
Data publikacji:
2014
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
chloramphenicol
determination
milk powder
liquid-liquid extraction
liquid chromatography-tandem mass spectrometry
veterinary drug residue
Opis:
Background. The European Union prohibits the use of chloramphenicol (CAP) as a veterinary drug in food-producing animals. Nevertheless, CAP have been detected in milk products (liquid milk and milk powder). Therefore, it is necessary to develop sensitive methods for determining CAP residues in milk powder. Objective. The aim of this study was to develop and validate a confirmatory method for determination of CAP in milk powder. Material and methods. Chloramphenicol was determined in milk powder using LC-ESI-MS/MS in negative mode. After fat removing milk powder sample was extracted/cleaned-up with a Chem Elut extraction cartridge. Separation was achieved on a Phenomenex Luna C-18 column with acetonitrile-water as a mobile phase. The mass spectrometer was operated in multiple reaction monitoring mode (MRM). Four transitions were monitored m/z 321→152, 321→194, 321→257 (CAP) and 326→157 (IS CAP-d5). Results. Linearity, accuracy, precision, decision limit (CCa), detection capability (CCb) and ruggedness were determined for m/z 321→152. The mean relative recoveries (inter standard-corrected) of CAP from whole milk powder spiked at levels 0.1, 0.2, 0.3 and 0.6 mg/kg were in the range 95 - 103%. Relative standard deviation (RSD%) of recoveries at all spiked levels were less than 14%. RSDs within-laboratory reproducibility calculated at fortification of 0.3 mg/kg was less than 16%. CCa and CCb were below 0.1 mg/kg. Conclusions. The developed LC-MS/MS method allows the determination of CAP in milk powder. The method was validated according to the Commission Decision No. 2002/657/EC requirements. This method can be applied to determination CAP in whole and skim milk powder.
Wprowadzenie. Unia Europejska zabroniła stosowania chloramfenikolu (CAP) jako leku weterynaryjnego u zwierząt, których produkty są przeznaczone do spożycia. Pomimo tego, CAP jest wykrywany w produktach mleczarskich (mleko i mleko w proszku). Cel. Celem badań było opracowanie i zwalidowanie metody pozwalającej na oznaczanie CAP w mleku w proszku. Materiał i metoda. CAP był oznaczany w mleku w proszku metodą LC-ESI-MS/MS w trybie jonizacji ujemnej. Po usunięciu tłuszczu próbka była ekstrahowana/oczyszczana za pomocą ekstrakcyjnych kolumienek Chem Elut. Do rozdziału CAP stosowano kolumnę chromatograficzną Phenomenex Luna C-18. Fazę ruchomą stanowił acetonitryl/woda. Spektrometr masowy pracował w trybie monitorowania wybranych reakcji (MRM). Cztery przejścia były monitorowane m/z 321→152, 321→194, 321→257 (CAP) i 326→157 (IS CAP-d5). Wyniki. Liniowość, odzysk, precyzja, limit decyzyjny (CCa), zdolność wykrywania (CCb) i odporność metody zostały wyznaczone dla 321→152. Średni względny odzysk CAP z mleka pełnego był wyznaczony dla próbek wzbogaconych na poziomach odpowiadających 0.1, 0.2, 0.3 i 0.6 mg/kg i mieściły on się w zakresie 95 - 103%. Względne odchylenie stadardowe (RSD%) dla wszystkich poziomów było mniejsze niż 14%. Powtarzalność wewnątrzlaboratoryjna (RSDs) obliczona dla poziomu wzbogacenia 0.3 mg/kg była mniejsza niż 16%. CCa and CCb były poniżej 0.1 mg/kg. Wnioski. Opracowana metoda LC-ESI-Ms/MS pozwala oznaczyć CAP w mleku w proszku. Metoda została zwalidowana zgodnie z wymaganiami decyzji Komisji nr 2002/657/WE. Metoda może być stosowana do mleka pełnego i odtłuszczonego.
Źródło:
Roczniki Państwowego Zakładu Higieny; 2014, 65, 3
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie metodyki oznaczania WWA w próbkach gleb z wykorzystaniem chromatografii cieczowej HPLC
Development of a methodology for the determination of PAH in soil samples using HPLC
Autorzy:
Wojtowicz, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2143358.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
chromatografia
HPLC
wielopierścieniowe węglowodory aromatyczne
QuEChERS
ekstrakcja
faza stała
SPE
high-performance liquid
chromatography
polycyclic aromatic hydrocarbons
extraction
solid phase
Opis:
W artykule przedstawione zostały zagadnienia związane z opracowaniem metodyki chromatograficznego oznaczania wielopierścieniowych węglowodorów aromatycznych w próbkach gleb. Do tego celu stosowano chromatograf cieczowy serii Vanquish Core firmy Thermo Scientific wyposażony w detektor fluorescencyjny (FLD) i detektor UV-ViS. W ramach prowadzonych badań określono optymalne parametry pracy chromatografu, takie jak: objętość próbki, rodzaj eluentów, szybkość przepływu eluentów, gradient eluentów w trakcie analizy chromatograficznej i czas analizy, oraz dobrano kolumnę chromatograficzną umożliwiającą selektywny rozdział analitów. Następnie wykonano kalibrację układu chromatograficznego i walidację metody analitycznej oznaczania WWA, stosując roztwory kalibracyjne opracowane na podstawie roztworu wzorcowego PAH-Mix nr ref. 722393 firmy Macherey-Nagel. Walidacja metody analitycznej obejmowała wyznaczenie liniowości, odchylenia standardowego, względnego odchylenia standardowego, granicy wykrywalności (LOD) i granicy oznaczalności (LOQ) badanych WWA. Chromatograficzna metoda identyfikacji WWA w próbkach gleb wymaga przeprowadzenia analitów z matrycy stałej do matrycy ciekłej (etap izolacji), oczyszczenia próbki z substancji przeszkadzających oraz zagęszczenia ekstraktu (etap wzbogacania). W celu opracowania metody oznaczania WWA w próbkach gleb sprawdzono 3 metody przygotowania próbek do analizy chromatograficznej HPLC: metodę A (metoda QuEChERS), metodę B (ekstrakcja rozpuszczalnikiem w aparacie Soxhleta) i metodę C (ekstrakcja rozpuszczalnikiem wspomagana wytrząsaniem). Otrzymane ekstrakty były następnie oczyszczane na wybranym materiale sorpcyjnym: MgSO4 i PSA (metoda A), CN/SiOH (metoda B) i Al2O3 (metoda C). Do przetestowania wybranych metod przygotowania próbek gleby do analizy chromatograficznej HPLC wykorzystano glebę wzorcową PAHs by HPLC40g (SQC017-40G) firmy Sigma Aldrich, o znanych stężeniach analitów. Oczyszczone ekstrakty poddano analizie chromatograficznej HPLC, obejmującej identyfikację oraz ilościowe oznaczenie poszczególnych WWA, oraz obliczono stopnie odzysku analitów. Na podstawie analiz chromatograficznych i stopni odzysku wytypowano optymalną metodykę przygotowania próbek gleb do analizy chromatograficznej pod kątem oznaczania wielopierścieniowych węglowodorów aromatycznych. Opracowaną metodykę oznaczania WWA w próbkach gleb przetestowano na rzeczywistych próbkach gruntu pobranych z 2 otworów badawczych zlokalizowanych na terenie kopalni ropy naftowej usytuowanej w południowo-wschodniej Polsce.
The article presents issues related to the development of a methodology for the chromatographic determination of polycyclic aromatic hydrocarbons in soil samples. For this purpose, a Vanquish Core series liquid chromatograph by Thermo Scientific equipped with a fluorescence detector (FLD) und UV-ViS detector was used. As part of the research, the optimal parameters of the chromatograph work were determined, such as sample volume, type of eluents, eluent flow rate, eluent gradient during the chromatographic analysis and analysis time, and the chromatographic column was selected to enable selective separation of analytes. Then, the chromatographic system was calibrated and the analytical method for PAH determination was validated using calibration solutions prepared on the basis of the PAH-Mix standard solution ref. 722393 from Macherey-Nagel. The validation of the analytical method included the determination of results linearity, standard deviation and relative standard deviation, as well as limit of detection (LOD) and limit of quantification (LOQ) of the tested method. The chromatographic method of identifying PAHs in soil samples requires the transfer analytes from a solid matrix to a liquid matrix (isolation stage), removal of interfering substances from the sample and concentration of extracts (enrichment stage). Soil samples were tested with 3 methods of sample preparation for HPLC analysis: method A (QuEChERS method), method B (solvent extraction in a Soxhlet apparatus), method C (solvent extraction with shaking). The obtained extracts were then purified on the selected sorption material: MgSO4 and PSA (method A), CN/SiOH (method B) and Al2O3 (method C). Standard soil PAHs by HPLC40g (SQCo17-40g) from Sigma Aldrich with known analyte concentrations was used to test selected methods of preparing soil samples for HPLC chromatographic analysis. The purified extracts were subjected to HPLC chromatographic analysis including identification and quantification of individual PAHs, and the recovery rates of the analytes were calculated. On the basis of chromatographic analyzes and degrees of recovery, the most optimal methodology for preparing soil samples for chromatographic analysis for the determination of polycyclic aromatic hydrocarbons was selected. The developed methodology for determination of PAHs in soil samples was tested on real soil samples collected from 2 boreholes located in an oil mine site in south-eastern Poland.
Źródło:
Nafta-Gaz; 2022, 78, 2; 141-153
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of trace quantities of dutasteride in water and wastewater by solid phase extraction and high-performance liquid chromatography
Autorzy:
Wasilewska, A.
Madajczyk, M.
Szymański, A.
Urbaniak, W.
Powiązania:
https://bibliotekanauki.pl/articles/347041.pdf
Data publikacji:
2011
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydział Technologii i Inżynierii Chemicznej
Tematy:
dutasteride
emerging pollutants
solid-phase extraction (SPE)
liquid chromatography
HPLC
Opis:
Steroid compounds are a kind of pollutants which are increasingly more frequently found in environmental samples. Due to the ever more increasing level of such pollutants and their biological activity, they are of interest to analysts. Our study involved the development of a simple and fast method for the assay of dutasteride in treated industrial waste water using high-performance liquid chromatography. As the steroid concentration in water is much lower than the limit of detection of the UV detector used, the compound assayed in the test water was pre-concentrated using solid-phase extraction. Our procedure has high accuracy and a precision of 2.6%, and the recovery of the analyte from water is 78.6%. The procedure enables the assay of dutasteride at a level of 2 microg/L in water.
Źródło:
Ars Separatoria Acta; 2011, 8; 39-49
1731-6340
Pojawia się w:
Ars Separatoria Acta
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ rodzaju i parametrów ekstrakcji na wydajność izolacji wybranych furanokumaryn z owoców gorysza wyniosłego (Peucedanum verticillare)
Influence of the extraction type on the yield of some furanocoumarins from Peucedanum verticillare fruits
Autorzy:
Waksmundzka-Hajnos, M.
Oniszczuk, A.
Podgórski, R.
Powiązania:
https://bibliotekanauki.pl/articles/92214.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
furanokumaryny
gorysz wyniosły
ekstrakcja ciało stałe-ciecz
wysokosprawna chromatografia cieczowa
furanocoumarins
peucedanum verticillare
solid-liquid extraction
high performance liquid chromatograph
Opis:
Analiza materiału roślinnego jest ważnym zadaniem w poszukiwaniu roślin o działaniu farmakologicznym a także w standaryzacji leków roślinnych. Celem każdego procesu ekstrakcji jest szybka i skuteczna izolacja związków z matrycy przy użyciu minimalnej ilości rozpuszczalnika. Celem przedstawionej pracy był wybór optymalnych warunków do analizy materiału roślinnego oraz zbadanie wpływu metody ekstrakcji na wydajność izolacji niektórych furanokumaryn z owoców gorysza wyniosłego. Furanokumaryny mają istotne zastosowanie w lecznictwie. Są między innymi wykorzystywane w terapii bielactwa i łuszczycy oraz leczeniu skórnego T-komórkowego chłoniaka z erytmodermią. Zastosowano następujące metody ekstrakcyjne: wyczerpująca ekstrakcja w aparacie Soxhleta, ekstrakcja wspomagana ultradźwiękami w temperaturze 20 i 60◦C oraz ekstrakcja wspomagana mikrofalami w układzie otwartym i zamkniętym. Analiza została przeprowadzona metodą wysokosprawnej chromatografii cieczowej z detektorem UV/VIS. Wyniki wskazują, że najwyższą wydajność imperatoryny uzyskano w wyniku ekstrakcji ultradźwiękowej 60◦C, natomiast metodą najskuteczniejszą do izolacji umbeliferonu okazała się ekstrakcja mikrofalowa w układzie zamkniętym.
Analysis of plant material is an important task in chemotaxonomical investigations, particularly, in search of plants with pharmacological activity or in standardisation of plant drugs. The goal of every extraction process is rapid and effective isolation of compounds from a matrix by use of minimum amount of solvent. The aim of this paper was the choice of optimal condi-tions for the analysis of plant material and effect of extraction method on the yield of some furanocoumarins from Peucedanum verticillare fruits. Furanocoumarins have important uses in human medicine and exhibit toxicity against a wide range of organisms. This group of com-pounds reveal pharmacological activity. They are important drugs in vitiligo and psoriaris therapy and are also used in therapy erythrodermic variants of cutaneous T-cell lymphoma and chronic graft-versus-host disease. The following extraction methods were used in our experiments: exhaustive extraction in Soxh-let apparatus, ultrasound- assisted solvent extraction (USAE) at 20 and 60◦C as well as micro-wave-assisted solvent extraction in open and closed system (MASE). Target compounds analysis was performed by high performance liquid chromatography with UV/VIS detector. The results indicated that, the highest yield of imperatorin can be obtained by ultrasonification at 60◦C, while microwave-assisted solvent extraction in closed system is very efficient in the extraction of umbelliferone.
Źródło:
Camera Separatoria; 2012, 4, 1; 83-91
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Developing a complex of measures for liquid removal from gas condensate wells and flowlines using surfactants
Autorzy:
Volovetskyi, V.B.
Doroshenko, Ya.V.
Kogut, G.M.
Rybitskyi, I.V.
Doroshenko, J.I.
Shchyrba, O.M.
Powiązania:
https://bibliotekanauki.pl/articles/2175794.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
well
gas
flowline
gas pipeline
liquid removal
hydrocarbon extraction
internal cavity cleaning
studnia
gaz
linia przepływu
gazociąg
usuwanie cieczy
ekstrakcja węglowodorów
czyszczenie wnęk wewnętrznych
Opis:
Purpose: The purpose of this work is to consider the complications that arise while operating gas condensate wells, in particular, the accumulation of hydrocarbon condensate, formation and condensation water at wells and flowlines, to develop a method for removing liquid from wells and flowlines before it entering a gas treatment unit and being treated with surfactants and to develop a method for the foam destruction in the gas-liquid flow. Design/methodology/approach: The operational parameters of gas-condensate wells of the Yuliivske oil and gas condensate field (OGCF) have been analysed. Wells have been identified that are operated in difficult conditions due to the accumulation of the liquid at the bottom hole and in flowlines. The volume of the liquid accumulated at the bottom hole of gas condensate wells is estimated. The quantity of surfactants, the volume and concentration of the solution required to remove the liquid were calculated individually for each well. The program of experimental researches has been made. The efficiency of the application of surfactant solution was experimentally determined and a positive result was achieved in the form of an increase in production by 10%. A new approach to the use of surfactant solution, as well as the foam destruction, has been proposed. The studies were performed within the framework of research and development work by the specialists of the Ukrainian Scientific Research Institute of Natural Gases. Findings: Comprehensive measures are proposed to increase the efficiency of gas condensate wells operation. They are monitoring of operational parameters of wells by pressure and temperature gauges installed at the wellhead and at the inlet gas pipelines of the gas treatment unit; calculation of the volume of accumulated fluid in the wellbore and flowline; installation of a complex of automated feeding a surfactant solution of both in the annulus of the wells and in the flowline. For this purpose, two options for the complex and and have a different principle of operation. To prevent foam from entering the gas treatment unit, a method of its destruction has been proposed. The implementation of the proposed comprehensive measures will allow controlling the well operation mode, timely liquid removal from the well and the flowline and ensure stable hydrocarbon production. Research limitations/implications: The obtained results of laboratory and experimental studies have shown that using a surfactant solution is reasonable to remove the liquid from gas condensate wells. To increase the efficiency of the measure, a new method of feeding surfactant solution was developed by installing a unit for automated feeding (UAF) of a surfactant solution at the mouth. Practical implications: The results of laboratory tests allow using a surfactant solution reasonably in order to remove the liquid from gas condensate wells, as well as possible further destruction of foam in the gas-liquid flow for increasing both the efficiency of the extraction and production volume. Originality/value: On the basis of previously performed experimental research, it has been established that it is advisable to use a surfactant solution to remove the liquid from gas condensate wells and flowlines. A new method of removing liquid from gas condensate wells and flowlines has been developed, as well as a method of destroying foam in a gas-liquid flow, which are original and can be implemented.
Źródło:
Archives of Materials Science and Engineering; 2021, 108, 1; 24--41
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solvent extraction of Terbium(III) from chloride solution using organophosphorus extractant, its mixture and ionic liquid in the presence of organic acids
Autorzy:
Tran, Thanh Tuan
Song, Si Jeong
Oh, Chang Geun
Lee, Man Seung
Powiązania:
https://bibliotekanauki.pl/articles/24085863.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
extraction
Terbium(III)
organic acid
ionic liquid
buffer effect
Opis:
Addition of organic acids to dilute hydrochloric acid solution can improve the extraction of rare earth elements by single cationic extractants. However, the correlation between the chemical structure of organic acids and the extraction of REEs as well as the variation in equilibrium pH has not been elucidated. In this study, we investigated the extraction of Tb(III) from dilute HCl solutions containing an organic acid like formic, lactic, fumaric, or maleic acid. As extractants, single Cyanex 272, a mixture of Cyanex 272 and Alamine 336 (Ala336-Cy272), and an ionic liquid (ALi-Cy272) synthesized by Cyanex 272 and Aliquat 336 were used. The speciation of Tb(III) in dilute HCl solutions containing organic acids was analyzed. In extraction of Tb(III), organic acids showed two roles as complexing and buffering agent, which depended on the chemical structure of the acids. There was some difference in the extraction of Tb(III) between single Cyanex 272 and ionic liquid, ALi-Cy272. During extraction with ALi-Cy272, formic and lactic acid negatively affected the extraction of Tb(III). The fact that the chemical structure of organic acids affected the extraction of Tb(III) from dilute HCl solution by the studied extractants can provide important information on the selection of suitable extraction systems.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 2; art. no. 162714
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odzyskiwanie etanolu z niskostężonych roztworów wodnych za pomocą kontaktorów membranowych z udziałem cieczy jonowej
Ethanol recovery from low-concentration aqueous solution using membrane contactors with ionic liquids
Autorzy:
Snochowska, K.
Tylman, M.
Kamiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/126221.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
kontaktor membranowy
ciecz jonowa
ekstrakcja membranowa
membrane contactor
ionic liquid
membrane extraction
Opis:
Odzyskiwanie alkoholu z rozcieńczonych roztworów wodnych jest procesem wysoko energochłonnym. W celu obniżenia kosztów do zatężania rozcieńczonych roztworów alkoholi wykorzystuje się procesy membranowe, między innymi ekstrakcję membranową. W pracy przedstawiono wyniki badań procesu zatężania rozcieńczonych wodnych roztworów etanolu w kontaktorze membranowym z zastosowaniem cieczy jonowej. W przeprowadzonych eksperymentach wykorzystano kontaktor membranowy z mikroporowatymi membranami kapilarnymi stanowiącymi barierę między roztworem surowym a ekstrahentem, a jednocześnie zapewniającymi dużą powierzchnię wymiany masy. W procesie jako ekstrahenta użyto cieczy jonowej wykazującej selektywność w stosunku do etanolu. Omówiono wyniki badań procesu zatężania roztworów etanolu o stężeniach od 1 do 5% masowych i natężeniach przepływu nadawy zmienianych w zakresie 1-8 dm3/h.
Recovery of alcohol from diluted aqueous solutions is a highly energy-intensive process. In order to reduce the costs of concentration of alcohols, membrane processes (including membrane extraction) are used. This paper reports the results of ethanol concentration from diluted water solutions using a membrane contactor with ionic liquid. The studies were performed using a membrane contactor with microporous capillary membranes. The membrane is a barrier between the raw and the extractant solution, also providing a large mass transfer area. In the process ionic liquids having different selectivity to ethanol as extractant were used. Results were obtained for concentration of ethanol solutions in the range of 1 to 5 wt.% and for the different feed flow rates ranges from 1 to 8 dm3/h.
Źródło:
Proceedings of ECOpole; 2015, 9, 1; 301-309
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gamma radiolytic stability of CyMe4BTBP and the effect of nitric acid
Autorzy:
Schmidt, H.
Wilden, A.
Modolo, G.
Švehla, J.
Grüner, B.
Ekberg, C.
Powiązania:
https://bibliotekanauki.pl/articles/148662.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
CyMe4BTBP
gamma radiolysis
liquid-liquid extraction
nitric acid
partitioning
protective effect
Opis:
The highly selective nitrogen donor ligand CyMe4BTBP for An(III) separation by solvent extraction was irradiated in a 60Co γ-source under varying conditions. Organic solutions of 10 mmol/L ligand in 1-octanol were contacted with different concentrations of nitric acid to observe the influence of an aqueous phase during irradiation. In subsequent liquid-liquid extraction experiments, distribution ratios of 241Am and 152Eu were determined. Distribution ratios decreased with increasing absorbed dose when irradiation was performed in the absence of nitric acid. With addition of nitric acid, initial distribution ratios remained constant over the whole examined dose range up to 300 kGy. For qualitative determination of radiolysis products, HPLC-MS measurements were performed. The protective effect of nitric acid was confi rmed, since in samples irradiated with acid contact, no degradation products were observed, but only addition products of the 1-octanol molecule to the CyMe4BTBP molecule.
Źródło:
Nukleonika; 2015, 60, No. 4, part 2; 879-884
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekstrakcja jonów miedzi w ceramicznym kontaktorze membranowym
Extraction of copper ions in a ceramic membrane contactor
Autorzy:
Sawiński, W.
Feder-Kubis, J.
Ludwig, W.
Powiązania:
https://bibliotekanauki.pl/articles/2072197.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ciecz jonowa
eter koronowy
ekstrakcja miedzi
membrana ceramiczna
ionic liquid
crown ether
coppcr extraction
ceramic membrane
Opis:
Wykonano eksperymentalne badania procesu usuwania Cu(II) z roztworów wodnych przy użyciu ceramicznej membrany wypełnionej roztworem eteru koronowego 4,13-diaza-18-korona-6 w bis(trifluorometylosulfonylo)imid- ku l-decylo-3-metylo imidazoliowym [C10MIM][NTf2]. Określono wpływ gradientu temperatur i pH fazy akceptorowej na szybkość transportu Cu2+ przez membranę. Stwierdzono, że dodanie fosforanu tributylu do [C|0MIM] [NTf2] (1:1 v/v) nieznacznie obniża współczynnik podziału Cu(II) w badanym układzie.
Experimental studies on removal of copper(II) from aqueous solutions using a ceramic membrane contactor with 4,13-diaza-18-crown-6 ether as carrier dissolved in l-decyl-3-methylimidazolium bis(trifluoromethylsul- fonyl)amide [C10MIM][NTf2] were carried out. The influence of temperature gradient and external phase pH on mass-transfer rate of Cu2+ was experimentally investigated. It was found that the addition of 50% (v/v) of tributyl phosphate (TBP to [C10MIM][NTf2].
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 471--472
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrometallurgical recovery of platinum group metals from spent automotive converters
Autorzy:
Rzelewska-Piekut, Martyna
Paukszta, Dominik
Regel-Rosocka, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/1447587.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
leaching
platinum group metals
PGM
recovery
spent automotive converters
liquid extraction
ionic liquid
Cyphos IL 101
Opis:
This work presents studies on the recovery of platinum group metals (PGM), especially platinum and rhodium, from spent automotive converters using hydrometallurgical techniques such as leaching and liquid-liquid extraction. The XRD analysis confirmed the presence of indialite – the high temperature hexagonal form of cordierite (the main catalyst building material) in the solid samples. The influence of time and temperature on the leaching of PGM from spent automotive converters was investigated. The largest amounts of Pt(IV) and Rh(III) were leached with freshly prepared aqua regia and a mixture of HCl, $H_2SO_4$ , and $H2O_2$. Further, liquid-liquid extraction with quaternary phosphonium ionic liquid (Cyphos IL 101) was applied to recover PGM from the leach solutions (after leaching with a mixture of HCl, $H_2SO_4$, and $H_2O_2$ and to separate Pt(IV) from Rh(III).
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 2; 83-94
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie czwartorzędowych soli fosfoniowych jako ekstrahentów Ru(III) i Rh(III) z modelowych roztworów wodnych
Application of quaternary phosphonium salts as extractants of Ru(III) and Rh(III) from model aqueous solutions
Autorzy:
Rzelewska, M.
Janiszewska, M.
Regel-Rosocka, M.
Powiązania:
https://bibliotekanauki.pl/articles/1208359.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
ekstrakcja ciecz-ciecz
ruten(III)
rod(III)
czwartorzędowe sole fosfoniowe
ciecze jonowe
liquid-liquid extraction
ruthenium(III)
rhodium(III)
quaternary phosphonium salts
ionic liquids
Opis:
Przedstawiono badania ekstrakcji rodu(III) i rutenu(III) z modelowych chlorkowych roztworów wodnych za pomocą czterech czwartorzędowych soli fosfoniowych, mających taki sam kation triheksylo(tetradecylo)fosfoniowy i różne aniony: chlorkowy (Cyphos IL 101), bromkowy (Cyphos IL 102), bis( 2,4,4-trimetylopentylo)fosfinianowy (Cyphos IL 104) oraz bis(trifluorometylosulfonylo)imidkowy (Cyphos IL 109) rozpuszczonych w toluenie. Badano wpływ czasu wytrząsania obu faz, stężenia HCl, a także stężenia cieczy jonowej (IL) na ekstrakcję jonów Ru(III) i Rh(III).
Rhodium(III) and ruthenium(III) were extracted from model chloride solutions with four quaternary phosphonium salts with the same cation trihexyl(tetradecyl)phosphonium and various anions: chloride (Cyphos IL 101), bromide (Cyphos IL 102), bis( 2,4,4-trimethylpentyl)phosphinate (Cyphos IL 104) and bis(trifluoromethylsulfonyl) imide (Cyphos IL 109) dissolved in toluene. The effect of shaking time of both phases, HCl concentration and IL concentration on Ru(III) and Rh(III) extraction were studied.
Źródło:
Chemik; 2016, 70, 9; 515-520
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of palladium(II) from aqueous chloride solutions with cyphos phosphonium ionic liquids as metal ion carriers for liquid-liquid extraction and transport across polymer inclusion membranes
Autorzy:
Regel-Rosocka, M.
Rzelewska, M.
Baczynska, M.
Janus, M.
Wisniewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/109722.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
palladium(II)
phosphonium ionic liquids
polymer inclusion membranes
liquid-liquid extraction
Opis:
This paper presents an application of three phosphonium ionic liquids for removal of Pd(II) ions from aqueous chloride solutions with liquid-liquid extraction and transport across polymer inclusion membranes (PIM). Trihexyl(tetradecyl)phosphonium chloride and bromide (Cyphos IL 101 and 102) and bis-(2,4,4-trimethylpentyl)phosphinate (Cyphos IL 104) were investigated as carriers of Pd(II) from aqueous chloride media. Extraction of Pd(II) with Cyphos IL 102 has not been previously described in the literature. Cyphos IL 102 used for the first time as metal ion carrier, efficiently extracts palladium(II) ions both with liquid-liquid extraction and PIM. NaCl concentration does not affect Pd(II) extraction with Cyphos IL 102, while increasing HCl content in the feed aqueous phase causes decrease in extraction efficiency. Stripping of Pd(II) with 0.5 M NH4OH is efficient (84 to 90%) and the organic phase after stripping could be reused for extraction. For PIM transport the highest values of the normalized initial flux are obtained for CTA membrane containing Cyphos IL 101 and a receiving phase: mixture 0.1 thiourea + 0.5 M HCl. It is indicated that initial flux does not determine the final result of the transport through the membranes because from the separation point of view, the most important is a complete transport of the solute to the receiving phase, described by the Pd(II) recovery factor.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 621-631
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Evolution During Extraction and Recovery of Pure Nd from Magnet
Autorzy:
Rasheed, Mohammad Zarar
Nam, Sun-Woo
Lee, Sang-Hoon
Park, Sang-Min
Cho, Ju-Young
Kim, Taek-Soo
Powiązania:
https://bibliotekanauki.pl/articles/2048880.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Liquid Metal Extraction
rare earth recycling
vacuum distillation
phase transformation
Opis:
Liquid Metal Extraction process using molten Mg was carried out to obtain Nd-Mg alloys from Nd based permanent magnets at 900°C for 24 h. with a magnet to magnesium mass ratio of 1:10. Nd was successfully extracted from magnet into Mg resulting in ~4 wt.% Nd-Mg alloy. Nd was recovered from the obtained Nd-Mg alloys based on the difference in their vapor pressures using vacuum distillation. Vacuum distillation experiments were carried out at 800°C under vacuum of 2.67 Pa at various times for the recovery of high purity Nd. Nd having a purity of more than 99% was recovered at distillation time of 120 min and above. The phase transformations of the Nd-Mg alloy during the process, from Mg12Nd to α-Nd, were confirmed as per the phase diagram at different distillation times. Pure Nd was recovered as a result of two step recycling process; Liquid Metal Extraction followed by Vacuum Distillation.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1001-1005
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel approach for calculating packed column height based on new correlation of mass transfer coefficient
Autorzy:
Rahbar-Kelishami, A.
Bahmanyar, H.
Hajamini, Z.
Powiązania:
https://bibliotekanauki.pl/articles/778168.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
separation
liquid-liquid extraction
packed column
mass transfer
column design
diffusion
Opis:
The calculation of column’s height plays an important role in packed columns precise design. This research is based on experimentally measurement of mass transfer coefficients in different heights of packed column to predict its height. The objective of presented work is to introduce a novel conceptual method to predict column height via new correlation for mass transfer coefficient. As the mass transfer coefficient is decreased with increase of column height, the HTU’s are not constant figures along the column so this new approach is called increasing HTU’s. The results of the proposed idea were compared with other correlations and the conventional method i.e. constant HTU’s. Since the results are in very good agreement with experimental data comparing to conventional method, it seems this approach can be a turning point in design of all differential columns like packed columns. Making use of this method is suggested for design of differential columns.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 48-54
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of aflatoxin M1 contamination levels in milk and milk products by HPLC-FLD with post – column derivatization®
Oznaczanie poziomów zanieczyszczenia aflatoksyną M1 mleka i produktów mlecznych metodą hPLC-FLD z derywatyzacją pokolumnową®
Autorzy:
Polak-Śliwińska, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/1535171.pdf
Data publikacji:
2020
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
aflatoxin M1
AFM1
milk
milk products
solid phase extraction
high performance liquid chromatography
aflatoksyna M1
mleko
produkty mleczne
wysokosprawna chromatografia cieczowa
ekstarkcja do fazy stałej
Opis:
In the present study, 34 samples of pasteurised, ultra-high-temperature (UHT) treated milk and milk products (cheese, yoghurt and baby foods) in the city of Olsztyn, Poland, were analysed for aflatoxin M1 (AFM1). All samples were cleaned up using immunoaffinity column according to Romer Labs®procedure with minor modification. The Aflatoxin M1 levels were investigated by high performance liquid chromatography with a fluorescence detection (LC-FLD) and post - column derivatization following sample clean-up using AflaStar™ M1immunoaffinity columns (Romer Labs®, Inc., America). The mean recovery of the method was 95 %. The standard curve was linear in the range of 0.01 – 0.25 μg/Lwith correlation coefficient of 0.9998. The limit of detection was 0.01 μg/L. Results showed 27 (79.4%) positive samples for AFM1 at levels of 0.010-0.053 μg/L, which were below the tolerance limit of 0.500 μg/L as adopted for AFM1 in this products by EU regulations. Mean levels of AFM1 in pasteurized and UHT milk were 0.022±0,006 μg/L and 0.030±0,002 μg/L, respectively. However, only one sample among milk samples was contaminated at a level above the maximum permissible limit (0.050 μg/L) accepted by European Union and Poland for aflatoxin M1 and six of seven samples of baby food were contaminated at a level above the maximum permissible limit (0.025 μg/L). It is concluded that the incidence of AFM1 in milk traded in Olsztyn is high, but at levels that probably leads to a non-significant human exposure to AFM1 by consumption of milk. Experimental results show that, in comparison to milk samples, AFM1 contamination level was higher in samples of baby food. These data suggest that AFM1 concentration in milk could be good predictor of its fate in milk products, especially for infants and babies. The results of this study imply that more emphasis should be given to the routine AFM1inspection of milk and milk products in Poland. Furthermore, both farmers and dairy companies should be informed on the importance of AFM1, and the consequences of the presence of the aflatoxin in dairy products.
W niniejszej pracy analizie pod kątem zawartości aflatoksyny M1 (AFM1) poddano 34 próbki pasteryzowanego mleka po obróbce w ultra wysokiej temperaturze (UHT) i produktów mlecznych (ser, jogurt i żywność dla niemowląt) zakupionych w mieście Olsztyn, w Polsce. Wszystkie próbki oczyszczono przy użyciu kolumn immunoafinitywnych zgodnie z procedurą Romer Labs® z niewielkimi modyfikacjami. Poziomy aflatoksyny M1 analizowano metodą wysokosprawnej chromatografii cieczowej z detekcją fluorescencyjną (LC-FLD) z deprywatyzacją pokolumnową po oczyszczeniu próbki przy użyciu kolumn immunoafinitywnych AflaStar ™ M1 (Romer Labs®, Inc., Ameryka). Średni odzysk metody wyniósł 95%. Krzywa standardowa była liniowa w zakresie 0,01–0,25 μg/L ze współczynnikiem korelacji R2 0,9998. Granica wykrywalności wynosiła 0,01 μg/L. Wyniki pokazały 27 (79,4%) pozytywnych próbek AFM1 na poziomach 0,010-0,053 μg / l, które były po-niżej granicy tolerancji 0,500 μg/L, przyjętej dla AFM1 w tych produktach w przepisach UE. Średnie poziomy AFM1 w mleku pasteryzowanym i UHT wynosiły odpowiednio 0,022 ± 0,006 μg/L i 0,030 ± 0,002 μg/L. Jednak tylko jedna próbka wśród próbek mleka była zanieczyszczona na poziomie powyżej maksymalnego dopuszczalnego limitu (0,050 μg/L) przyjętego przez Unię Europejską i Polskę dla aflatoksyny M1, a sześć z siedmiu próbek żywności dla niemowląt było zanieczyszczonych na poziomie powyżej maksymalnego dopuszczalnego limitu (0,025 μg / l). Stwierdzono, że częstość występowania AFM1 w mleku będącym przedmiotem obrotu w Olsztynie jest wysoka, ale na poziomach, które prawdopodobnie prowadzą do nieistotnego narażenia ludzi na AFM1 w wyniku spożycia mleka. Wyniki eksperymentalne wskazują, że w porównaniu z próbkami mleka poziom zanieczyszczenia AFM1 był wyższy w próbkach żywności dla niemowląt. Dane te sugerują, że stężenie AFM1 w mleku może być dobrym wskaźnikiem jego losów w produktach mlecznych, zwłaszcza dla niemowląt i małych dzieci. Wyniki tego badania sugerują, że należy położyć większy nacisk na rutynową kontrolę AFM1 mleka i przetworów mlecznych w Polsce. Ponadto zarówno rolnicy, jak i firmy mleczarskie powinni być informowani o znaczeniu AFM1 i konsekwencjach obecności aflatoksyny w produktach mlecznych.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2020, 2; 110-116
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies