Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "iron concentrates" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Removal of fine gangue minerals from Chador-malu iron concentrate using hydroseparator
Autorzy:
Tohry, A.
Dehghani, A.
Hosseini-Nasab, M.
Powiązania:
https://bibliotekanauki.pl/articles/109329.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Chador-malu plant
iron concentrates
silica
phosphorus
hydroseparator
Opis:
Phosphorus and silica are the main impurities of the Chador-malu iron ore which need to be reduced to the required values of 0.1 and 2%, respectively. The impurities in the final iron concentrate are mainly due to the presence of fine particles (less than 25 μm) of silica and apatite in the concentrates of magnetic separators and flotation circuits. In this study, the removal of very fine gangue minerals from iron concentrate of the Chador-malu processing plant was investigated using a laboratory hydroseparator. The laboratory-scale hydroseparator experiments were conducted under various operational conditions. The results showed that the silica and phosphorus contents of the flotation feed samples (less than 45 μm) decreased from 4.13% and 0.58% to 2.90 and 0.45%, respectively, while the iron grade increased from 59.5% to 63.5% by setting the effective parameters of the separator. The follow up flotation tests on the hydroseparator product resulted in an iron concentrate with silica and phosphorus contents of less than 2% and 0.04%, respectively. Moreover, its phosphorus content was reduced from 0.66% to 0.1% by desliming the final magnetic concentrate with hydroseparator. In this case, around 76% of phosphorus was removed.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 250-263
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological and Technologycal Aspects of Ash and Slag Wastes Utilization
Autorzy:
Aleksandrova, T. N.
Korchevenkov, S. A.
Powiązania:
https://bibliotekanauki.pl/articles/124768.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
ash wastes
slag wastes
waste management
iron concentrates
magnetic separation
Opis:
The article presents the results of investigation focused on the utilization of ash and slag wastes (ASW) in Russia including investigation of chemical and physical properties of ASW and processing products. Many factors influence the technological properties of ash and slag materials: naturals, processes and environments. The integrated treatment of ash and slag wastes of both stored and re-formed types will allow obtaining the following commercial products: coal concentrate, iron concentrate, aluminosilicate cenospheres, aluminosilicate product. In this study we have analyzed the methods for separation of ASW iron-containing part using the different types of the magnetic separation from the ash and slag material from one of the combined heat and power plant (CHPP) in the Russian Far East Federal District. The greatest interest is the dry magnetic separation with travelling electromagnetic field. The subject of research was a sample taken from one of ash dump of CHPP in the Far East. In the study iron concentrate containing Fetotal= 64% was obtained recovery 68% in the low intensity (up to 5 kOe) travelling magnetic field.
Źródło:
Journal of Ecological Engineering; 2017, 18, 4; 15-24
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Factors Affecting Ballability of Mixture Iron Ore Concentrates and Iron Oxide Bearing Wastes in Metallurgical Processing
Autorzy:
Udo, M. O.
Esezobor, D. E.
Apeh, F. I
Afolalu, A. S.
Powiązania:
https://bibliotekanauki.pl/articles/123037.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
ballabilty
bearing wastes
iron ore concentrates
Opis:
Iron oxide bearing wastes (IOBS) are produced at every part of processing stage of sinter, molten iron and steel production. They are hard to handle and in many cases are stockpiled only to be a source of environmental pollution. However, they can be balled into pellets. Pellets characterized by good ballability values are transportable and recyclable as they can withstand stress without disintegrating back to dust. Yet, ballability is affected by certain factors like the grain sizes of the materials, the moisture and binder contents of the ball mix, wettability of the balled materials and the processing perimeters of the granulator. The objective of this research work is to investigate the factors affecting ballability of mixture of iron ore concentrates and iron oxide bearing wastes in metallurgical processing. The parameters under consideration were: grain size of materials, the moisture contents, speed of balling disc, IOBS and bentonite (binder) contents of the balled mix. The investigation was carried out by balling different volume fractions of mix containing iron oxide concentrate and IOBS using a balling disc and testing the resulting balls for green compressive strength using an universal testing machine. It was found that the ballability of the mixture of iron ore concentrate and IOBS increases as grain sizes of the materials reduce but increases as the moisture contents and IOBS content increase up to an optimum value of moisture content in the mix before it starts to reduce. The ballability also increases along with the speed of the granulator (balling disc) within the limit of this work. An increase in ballability with a slight raise in bentonite content in the mix was observed as well.
Źródło:
Journal of Ecological Engineering; 2018, 19, 3; 235-242
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron-Ore Sintering Process Optimization
Optymalizacja procesu aglomeracji rudy żelaza
Autorzy:
Fröhlichová, M.
Ivanišin, D.
Mašlejová, A.
Findorák, R.
Legemza, J.
Powiązania:
https://bibliotekanauki.pl/articles/351686.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
iron ore
iron concentrates
sintering process
particulate matter
recycled materials
ruda żelaza
koncentrat żelaza
proces spiekania
pył
materiał surowcowy
Opis:
The work deals with examination of the influence of the ratio between iron ore concentrate and iron ore on quality of produced iron ore sinter. One of the possibilities to increase iron content in sinter is the modification of raw materials ratio, when iron ore materials are added into sintering mixture. If the ratio is in favor of iron ore sinter, iron content in resulting sintering mixture will be lower. If the ratio is in favor of iron ore concentrate and recycled materials, which is more finegrained, a proportion of a fraction under 0.5 mm will increase, charge permeability property will be reduced, sintering band performance will decrease and an occurrence of solid particulate matter in product of sintering process will rise. The sintering mixture permeability can be optimized by increase of fuel content in charge or increase of sinter charge moisture. A change in ratio between concentrate and iron ore has been experimentally studied. An influence of sintering mixture grain size composition, a charge grains shape on quality and phase composition on quality of the produced iron sinter has been studied.
Publikacja dotyczy zagadnienia oceny wpływu proporcji między koncentratem rudy żelaza a rudą żelaza na jakość wyprodukowanego spieku. Jedną z możliwości zwiększenia zawartości żelaza w spieku jest zmiana proporcji materiałów surowcowych, które dodaje się do mieszanki spiekalniczej wraz z materiałami zawierającymi rudę żelaza. Jeśli proporcja ta jest korzystna dla spieku, to będzie to mieć wpływ na mniejszą zawartość rudy żelaza w końcowej mieszance aglomeratu. Jeśli proporcja ta jest korzystna dla drobnoziarnistego koncentratu rudy żelaza i materiałów wtórnych, to wtedy: udział frakcji poniżej 0,5 mm ulegnie zwiększeniu, przewiewność wsadu oraz wydajność taśmy spiekania ulegną zmniejszeniu, zaś zwiększy się liczba cząstek stałych (emisji) pochodzących z procesu spiekania. Przewiewność mieszanki spiekalniczej można optymalizować poprzez zwiększenie zawartości paliwa we wsadzie albo poprzez zwiększenie wilgotności. Przeprowadzono eksperymentalną kontrolę zmiany proporcji między koncentratem a rudą żelaza. Zbadano wpływ składu granulometrycznego mieszanki aglomeratu oraz kształtu ziaren wsadu na jakość i skład fazowy wyprodukowanego spieku.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 4; 2895-2900
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermogravimetric Analysis of the Zinc Concentrates Oxidation Containing Various Iron Compounds
Termograwimetryczna analiza utleniania koncentratów cynkowych zawierających różne związki żelaza
Autorzy:
Małecki, S.
Jarosz, P.
Powiązania:
https://bibliotekanauki.pl/articles/356509.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
roasting
zinc concentrates
thermal analysis
iron compounds
utlenianie
koncentraty cynku
analiza termiczna
związki żelaza
Opis:
This paper presents the results of oxidation of zinc concentrates containing various iron compounds. Using the thermogravimetry and thermal analysis methods it was shown that the influence of the iron form affects the thermal oxidation process. They influence the rate of, oxidation of zinc sulphide and consequently the resulting rate of oxidation of the concentrate.
W pracy przedstawiono wyniki badań utleniania koncentratów cynku zawierających różne związki żelaza. Wykorzystując metody termograwimetrii i analizy termicznej wykazano wpływ formy występowania żelaza na efekty cieplne utleniania. Rzutują one na szybkość utleniania siarczku cynku i związaną z tym szybkość utleniania koncentratu.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 941-945
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies