Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "inverse heat conduction problem" wg kryterium: Temat


Tytuł:
An idea of a measurement system for determining thermal parameters of heat insulation materials
Autorzy:
Chudzik, S.
Minkina, W.
Powiązania:
https://bibliotekanauki.pl/articles/220464.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal conductivity
artificial neural networks
inverse heat conduction problem
Opis:
The article presents the prototype of a measurement system with a hot probe, designed for testing thermal parameters of heat insulation materials. The idea is to determine parameters of thermal insulation materials using a hot probe with an auxiliary thermometer and a trained artificial neural network. The network is trained on data extracted from a nonstationary two-dimensional model of heat conduction inside a sample of material with the hot probe and the auxiliary thermometer. The significant heat capacity of the probe handle is taken into account in the model. The finite element method (FEM) is applied to solve the system of partial differential equations describing the model. An artificial neural network (ANN) is used to estimate coefficients of the inverse heat conduction problem for a solid. The network determines values of the effective thermal conductivity and effective thermal diffusivity on the basis of temperature responses of the hot probe and the auxiliary thermometer. All calculations, like FEM, training and testing processes, were conducted in the MATLAB environment. Experimental results are also presented. The proposed measurement system for parameter testing is suitable for temporary measurements in a building site or factory.
Źródło:
Metrology and Measurement Systems; 2011, 18, 2; 261-273
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of thermal diffusivity values based on the inverse problem of heat conduction - numerical analysis
Autorzy:
Adamowicz, Adam
Powiązania:
https://bibliotekanauki.pl/articles/2204678.pdf
Data publikacji:
2022
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
thermal diffusivity
inverse heat conduction problem
impulse heating
finite element analysis
Opis:
This paper presents a discussion on the accuracy of the method of determining the thermal diffusivity of solids using the solution of the inverse heat conduction equation. A new measurement data processing procedure was proposed to improve the effectiveness of the method. Using the numerical model, an analysis of the sensitivity of the method of thermal diffusivity determination to changes in operational and environmental parameters of the test was carried out. The obtained results showed that the method was insensitive to the parameters of the thermal excitation impulse, the thickness of the tested sample, and the significant influence of convection cooling on its accuracy. The work was completed with the formulation of general conclusions concerning the conditions for determining the thermal diffusivity of materials with the use of the described method.
Źródło:
Acta Mechanica et Automatica; 2022, 16, 4; 399--407
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie przewodności cieplnej materiałów tekstylnych przy użyciu termowizji
Thermal conductivity evaluation of textile materials using infrared measurements
Autorzy:
Felczak, M.
Michalak, M.
Więcek, B.
Powiązania:
https://bibliotekanauki.pl/articles/154532.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przewodzenie ciepła
odwrotne zagadnienia termiczne
termowizja
heat transfer
inverse heat conduction problem
Opis:
W pracy przedstawiono nową metodę wyznaczania parametrów termicznych materiałów włókienniczych, w tym także anizotropowych. Do próbek włókienniczych dostarczana jest energia cieplna i mierzona jest wartość temperatury po obu stronach materiału. Praca jest kontynuacją badań właściwości ciepłoizolacyjnych materiałów włókienniczych w dynamicznych warunkach za pomocą metody termograficznej w wykorzystaniem luster [1-6]. W stanowisku pomiarowym, którego schemat przedstawiono w cytowanych pracach zostało zastosowane źródło energii cieplnej umożliwiające szybkie nagrzewanie badanej próbki. Wykonano pomiary termowizyjne rozkładu temperatury i na podstawie uzyskanych wyników oraz modelowania termicznego wyznaczono przewodność cieplną badanych włóknin.
A new method for evaluation of homogenous anisotropic textiles thermal parameters is presented in this paper. The research is a continuation of investigating the thermal properties of textile materials [1-6]. The thermal energy was supplied to textile materials and the temperature distribution on both surfaces of the textile waas recorded using an infrared camera. The setup enabled fast textile heating. A thermal energy impulse was supplied to nonwovens. Using the obtained results and the finite element model of heat conduction, the thermal conductivity of a textile is evaluated. In order to obtain the thermal conductivity, it is necessary to solve an inversed heat conduction problem. The parameterized direct heat conduction model is used to calculate it. The research included both isotropic and anisotropic textile materials. The work was performed as a part of the Research Project 3 T08E 050 28 financed by KBN, entitled "3688/B/T02/2009/36 "The elaboration of the method of evaluation of temperature dependent thermal parameters of smart textile materials".
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 10, 10; 1223-1226
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of Beck’s method combined with FEM and Trefftz functions to determine the heat transfer coefficient in a minichannel
Autorzy:
Maciejewska, B.
Powiązania:
https://bibliotekanauki.pl/articles/281153.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
Beck’s method
FEM
Trefftz functions
heat transfer coefficient
inverse heat conduction problem
flow boiling
Opis:
The aim of this study is to determine the heat transfer coefficient between the heated surface and the boiling fluid flowing in a minichannel on the basis of experimental data. The calculation model is based on Beck’s method coupled with the FEM and Trefftz functions. The Trefftz functions used in the Hermite interpolation are employed to construct the shape functions in the FEM. The unknown local values of the heat transfer coefficient at the foil- -fluid contact surface are calculated from Newton’s law. The temperature of the heated foil and the heat flux on the foil surface are determined by solving a two-dimensional inverse heat conduction problem. The study is focused on the identification of the heat transfer coefficients in the subcooled boiling region and the saturated nucleate boiling region. The results are compared with the data obtained through the one-dimensional method. The investigations also reveal how the smoothing of measurement data affects calculation results.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 103-116
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurements of absorbed heat flux and water-side heat transfer coefficient in water wall tubes
Autorzy:
Taler, D.
Taler, J.
Kowal, A.
Powiązania:
https://bibliotekanauki.pl/articles/240076.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kotło parowe
odwrotne przewodzenie ciepła
strumień ciepła
żużel
heat flux meter
inverse heat conduction problem
slagging
steam boiler
Opis:
The tubular type instrument (flux tube) was developed to identify boundary conditions in water wall tubes of steam boilers. The meter is constructed from a short length of eccentric tube containing four thermocouples on the fire side below the inner and outer surface of the tube. The fifth thermocouple is located at the rear of the tube on the casing side of the water-wall tube. The boundary conditions on the outer and inner surfaces of the water flux-tube are determined based on temperature measurements at the interior locations. Four K-type sheathed thermocouples of 1 mm in diameter, are inserted into holes, which are parallel to the tube axis. The non-linear least squares problem is solved numerically using the Levenberg-Marquardt method. The heat transfer conditions in adjacent boiler tubes have no impact on the temperature distribution in the flux tubes.
Źródło:
Archives of Thermodynamics; 2011, 32, 1; 77-88
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heating source localization in a reduced time
Autorzy:
Beddiaf, S.
Autrique, L.
Perez, L.
Jolly, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/331120.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
parameter identification
inverse heat conduction problem
optimal observation
source localization
identyfikacja parametryczna
odwrotne zagadnienie termiczne
obserwacja optymalna
lokalizacja źródła
Opis:
Inverse three-dimensional heat conduction problems devoted to heating source localization are ill posed. Identification can be performed using an iterative regularization method based on the conjugate gradient algorithm. Such a method is usually implemented off-line, taking into account observations (temperature measurements, for example). However, in a practical context, if the source has to be located as fast as possible (e.g., for diagnosis), the observation horizon has to be reduced. To this end, several configurations are detailed and effects of noisy observations are investigated.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2016, 26, 3; 623-640
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the possibility of determining the internal structure of composite material by estimating its thermal diffusivity
Autorzy:
Kucypera, S.
Powiązania:
https://bibliotekanauki.pl/articles/240948.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mathematical model
direct problem
inverse heat conduction problem
composite material
test stand
model matematyczny
zagadnienie proste
odwrotne przewodzenie ciepła
materiał kompozytowy
stanowisko badawcze
Opis:
The aim of this paper is analysis of the possibility of determining the internal structure of the fibrous composite material by estimating its thermal diffusivity. A thermal diffusivity of the composite material was determined by applying inverse heat conduction method and measurement data. The idea of the proposed method depends on measuring the timedependent temperature distribution at selected points of the sample and identification of the thermal diffusivity by solving a transient inverse heat conduction problem. The investigated system which was used for the identification of thermal parameters consists of two cylindrical samples, in which transient temperature field is forced by the electric heater located between them. The temperature response of the system is measured in the chosen point of sample. One dimensional discrete mathematical model of the transient heat conduction within the investigated sample has been formulated based on the control volume method. The optimal dynamic filtration method as solution of the inverse problem has been applied to identify unknown diffusivity of multi-layered fibrous composite material. Next using this thermal diffusivity of the composite material its internal structure was determined. The chosen results have been presented in the paper.
Źródło:
Archives of Thermodynamics; 2014, 35, 1; 3-15
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimum heating of cylindrical pressure components weakened by holes
Autorzy:
Dzierwa, P.
Taler, J.
Powiązania:
https://bibliotekanauki.pl/articles/240098.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kotły
naprężenie termiczne
normy
odwrotne zagadnienia przewodzenia ciepła
optymalizacja nagrzewania
zbiorniki ciśnieniowe
boiler standards
heating optimization
inverse heat conduction problem
pressure vessels
thermal stress
Opis:
A method for determining time-optimum medium temperature changes is presented. The heating of the pressure elements will be conducted so that the circumferential stress caused by pressure and fluid temperature variations at the edge of the opening at the point of stress concentration, do not exceed the allowable value. In contrast to present standards, two points at the edge of the opening are taken into consideration. The first point, P[1], is located at the cross section and the second, P[2], at the longitudinal section of the vessel. It will be shown that the optimum temperature courses should be determined with respect to the total circumferential stress at the point P[2], and not, as in the existing standards due to the stress at the point P[1]. Optimum fluid temperature changes are assumed in the form of simple time functions. For practical reasons the optimum temperature in the ramp form is preferred. It is possible to increase the fluid temperature stepwise at the beginning of the heating process and then increase the fluid temperature with the constant rate. Allowing stepwise fluid temperature increase at the beginning of heating ensures that the heating time of a thick-walled component is shorter than heating time resulting from the calculations according to EN 12952-3 European Standard. @eng
Źródło:
Archives of Thermodynamics; 2012, 33, 3; 111-121
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New technique of the local heat flux measurement in combustion chambers of steam boilers
Autorzy:
Taler, J.
Taler, D.
Sobota, T.
Dzierwa, P.
Powiązania:
https://bibliotekanauki.pl/articles/240253.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kocioł parowy
odwrotne zagadnienie przewodzenia ciepła
pomiar strumienia ciepła
żużlowanie komory paleniskowej
CFD simulation
heat flux measurement
inverse heat conduction problem
slagging of combustion chambers
steam boiler
Opis:
A new method for measurement of local heat flux to waterwalls of steam boilers was developed. A flux meter tube was made from an eccentric tube of short length to which two longitudinal fins were attached. These two fins prevent the boiler setting from heating by a thermal radiation from the combustion chamber. The fins are not welded to the adjacent water-wall tubes, so that the temperature distribution in the heat flux meter is not influenced by neighbouring water-wall tubes. The thickness of the heat flux tube wall is larger on the fireside to obtain a greater distance between the thermocouples located inside the wall which increases the accuracy of heat flux determination. Based on the temperature measurements at selected points inside the heat flux meter, the heat flux absorbed by the water-wall, heat transfer coefficient on the inner tube surface and temperature of the water-steam mixture was determined.
Źródło:
Archives of Thermodynamics; 2011, 32, 3; 103-116
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A sequential and global method of solving an inverse problem of heat conduction equation
Sekwencyjna i globalna metoda rozwiązania zagadnienia odwrotnego dla równania przewodnictwa ciepła
Autorzy:
Ciałkowski, M.
Grysa, K.
Powiązania:
https://bibliotekanauki.pl/articles/280136.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse problem
heat conduction
sequential method
global method
Opis:
The paper presents a solution to an inverse problem based on the analy- tical form of the direct problem solution in the convolutional form. The analytical form T (r, t) is a surface that is fitted to temperature patterns measured (and charged with errors) at the internal points. In the case of quickly-varying patterns, the solution to the inverse problem is highly sen- sitive to measurement errors (short sampling times). In order to obtain reliable results, the method of sequential (step by step) and global solving of the inverse problem was used together with smoothing the measurement results with the help of hyperbolic spline functions. The numerical results confirm effectiveness of the methods presented in the paper.
W pracy przedstawiono rozwiązanie zagadnienia odwrotnego w oparciu o analityczną postać rozwiązania zagadnienia prostego w postaci splotowej. Ta postać analityczna T (r, t) jest powierzchnią, która jest dopasowywana do przebiegów temperatury pomierzonej (obciążonej błędem) w punktach wewnętrznych. Dla przebiegów szybkozmiennych rozwiązanie zagadnienia odwrotnego jest bardzo wrażliwe na błędy pomiarów (małe czasy próbkowania). Dla otrzymania wiarygodnych wyników zastosowano metodę sekwencyjnego (z kroku na krok) i globalnego rozwiązywania zagadnienia odwrotnego w połączeniu z wygładzaniem wyników pomiarowych za pomocą hiperbolicznych funkcji sklejanych. Wyniki obliczeń numerycznych potwierdzają efektywność przedstawionych metod.
Źródło:
Journal of Theoretical and Applied Mechanics; 2010, 48, 1; 111-134
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of the average and local boundary condition of heat transfer during cooling with a water spray under surface boiling
Autorzy:
Jasiewicz, Elżbieta
Hadała, Beata
Malinowski, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/29520235.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
water spray cooling
heat transfer coefficient
heat flux
inverse problem
heat conduction equation
Opis:
The study determined the local and average heat transfer coefficient and the heat flux on the surface of a cylinder cooled with a water nozzle. The inverse method was used to identify the heat transfer coefficient. An objective function was defined to determine the distance between the measured and calculated temperatures. Two models describing the heat transfer coefficient on the cooled surface were considered. The first model described changes in the heat transfer coefficient as a function of the sample radius and cooling time, and the second one assumed the dependence of the heat transfer coefficient solely on time. Numerical simulations showed significant differences in the determined heat transfer coefficients depending on the adopted model of the boundary condition. The performed tests included experimental temperature measurements at selected points of the sensor, numerical simulations of temperature changes, and the inverse solution.
Źródło:
Computer Methods in Materials Science; 2020, 20, 4; 147-155
2720-4081
2720-3948
Pojawia się w:
Computer Methods in Materials Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal choice of integral parameter in a process of solving the inverse problem for heat equation
Autorzy:
Joachimiak, M.
Ciałkowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/240049.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inverse problem
sensitivity of solution
heat conduction
zagadnienie odwrotne
przewodnictwo ciepła
Opis:
Inverse boundary problem for cylindrical geometry and unsteady heat conduction equation was solved in this paper. This solution was presented in a convolution form. Integration of the convolution was made assuming the distribution of temperature T on the integration interval (ti, ti + Δt) in the form T (x, t) = T (x, ti) Θ + T (z, ti + Δt) (1 - Θ), where Θ ϵ (0,1). The influence of value of the parameter Θ on the sensitivity of the solution to the inverse problem was analysed. The sensitivity of the solution was examined using the SVD decomposition of the matrix A of the inverse problem and by analysing its singular values. An influence of the thermocouple installation error and stochastic error of temperature measurement as well as the parameter Θ on the error of temperature distribution on the edge of the cylinder was examined.
Źródło:
Archives of Thermodynamics; 2014, 35, 3; 265-280
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of the heating of a die for the extrusion of aluminium alloy profiles in terms of thermochemical treatment
Autorzy:
Joachimiak, Damian
Judt, Wojciech
Joachimiak, Magda
Powiązania:
https://bibliotekanauki.pl/articles/27312236.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
temperature distribution
solid component
extrusion
aluminium profiles
gas nitriding
direct
inverse
problem
heat conduction equation
Opis:
Thermochemical treatment processes are used to produce a surface layer of the workpiece with improved mechanical properties. One of the important parameters during the gas nitriding processes is the temperature of the surface. In thermochemical treatment processes, there is a problem in precisely determining the surface temperature of heat-treated massive components with complex geometries. This paper presents a simulation of the heating process of a die used to extrude aluminium profiles. The maximum temperature differences calculated in the die volume, on the surface and at the most mechanically stressed edge during the extrusion of the aluminum profiles were analysed. The heating of the die was simulated using commercial transient thermal analysis software. The numerical calculations of the die assumed a boundary condition in the form of the heat transfer coefficient obtained from experimental studies in a thermochemical treatment furnace and the solution of the nonstationary and non-linear inverse problem for the heat conduction equation in the cylinder. The die heating analysis was performed for various heating rates and fan settings. Major differences in the surface temperature and in the volume of the heated die were obtained. Possible ways to improve the productivity and control of thermochemical treatment processes were identified. The paper investigates the heating of a die, which is a massive component with complex geometry. This paper indicates a new way to develop methods for the control of thermochemical processing of massive components with complex geometries.
Źródło:
Archives of Thermodynamics; 2023, 44, 2; 159--175
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stable solution to nonstationary inverse heat conduction equation
Autorzy:
Joachimiak, M.
Ciałkowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/240557.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inverse problem
nonstationary heat conduction equations
solution sensitivity
integral parameter
zagadnienie odwrotne
parametr
całka
wrażliwość
roztwór
Opis:
The paper presents investigations related to solving of a direct and inverse problem of a non-stationary heat conduction equation for a cylinder. The solution of the inverse problem in the form of temperature distributions has been obtained through minimization of a functional being the measure of the difference between the values of measured and calculated temperatures in M points of the heated cylinder. The solution of the conduction equation was presented in the convolutional form and then numerically integrated approximating one of the integrand with a step function described with parameter Θ ∈ (0, 1]. The influence of the integration parameter Θ on the obtained solution of the inverse problem (including a number of temperature measurement points inside the heated body) has been analyzed. The influence of the parameter Θ on the sensitivity of the obtained temperature distributions has been investigated.
Źródło:
Archives of Thermodynamics; 2018, 39, 1; 25-37
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reconstruction of boundary condition of the third kind by applying the Ant Colony Optimization algorithm
Odtworzenie warunku brzegowego trzeciego rodzaju przy zastosowaniu algorytmu mrówkowego
Autorzy:
Hetmaniok, E.
Zielonka, A.
Powiązania:
https://bibliotekanauki.pl/articles/87300.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
warunek brzegowy
algorytm mrówkowy
przewodnictwo cieplne
zagadnienie odwrotne
boundary condition
ant colony optimization
heat conduction
inverse problem
Opis:
In this paper we present an application of the Ant Colony Optimization algorithm for solving the inverse heat conduction problem in which the state function and some of the boundary conditions should be determined. The ACO algorithm is a part of the swarm intelligence and it is inspired by the technique of searching for the shortest way connecting the ant-hill with the source of food. We propose to use this algorithm for minimizing the proper functional, which plays a crucial role in the method of solution and allows to reconstruct the value of heat transfer coefficient.
W niniejszym artykule przedstawione zostało zastosowanie algorytmu mrówkowego do rozwiązania odwrotnego zagadnienia przewodnictwa ciepła, polegającego na wyznaczeniu funkcji stanu oraz rekonstrukcji jednego z warunków brzegowych. Algorytm mrówkowy należy do grupy algorytmów inteligencji roju i zainspirowany został techniką wyszukiwania najkrótszej drogi łączącej mrowisko ze źródłem pożywienia. W proponowanym podejściu algorytm ten zostanie wykorzystany do wyznaczania minimum funkcjonału będącego istotnym elementem metody rozwiązania, umożliwiającym odtworzenie wartości współczynnika wnikania ciepła.
Źródło:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska; 2011, 1; 137-147
2084-073X
Pojawia się w:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies