Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "inverse dynamics" wg kryterium: Temat


Tytuł:
Prediction of the dynamic characteristics and control of aircraft in prescribed trajectory flight
Autorzy:
Blajer, W.
Graffstein, J.
Krawczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/280601.pdf
Data publikacji:
2001
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse dynamics
inverse simulation control
prescribed trajectory flight
Opis:
A unified and general approach to modeling and simulation of aircraft prescribed trajectory flight is presented in the paper. The program of motion is composed of a specified trajectory in space (two constrains on the aircraft position), a required fuselage attitude with respect to the trajectory, and optionally, elevator and rudder deflections and thrust changes, a tangent realization of the trajectory constrains arises, which yields two additional constraints on the fuselage attitude (which thus becomes fully specified). The govering equations of the programmed motion are developed in the form of differential-algebraic equations, and a method of solving the equations is proposed. The solution consist of variations of the aircraft state variables and the required control that ensures realization of the prescribed motion program. This gives a unique opportunity to study simulated control strategies and evaluate feasibility of modeled aircraft mission. Some results of numerical simulations are reported.
Predykcja własności dynamicznych i sterowania samolotem w ruchu programowym po założonej trajektorii. W pracy przedstawione jest uogólnione i zmodyfikowane podejście do modelowania i symulacji programowego ruch samolotu. Program ruchu budowany jest za pomocą założonej trajktorii przestrzennej (dwa warunki więzów nakładane na położenie samolotu), narzuconych zmian konfiguracji płatowca względem tej trajektorii oraz, opcjonalnie, zmian prędkości lotu. W przypadku samolotu sterowanego klasycznie za pomocą wychyleń powierzchni sterowych (lotek oraz sterów wysokości i kierunku) oraz zmiany siły ciągu, realizacja więzów trajektorii lotu jest styczna, co implikuje dwa dodkowe warunki na zmiany konfiguracji płatowca względem trajektorii. W ten sposób zmiany konfiguracji kątowej płatowca stają się w pełni określone (zaprogramowane). Równania ruchu programowego generowane są w postaci równań różniczkowo-algebraicznych. Proponowana jest metoda numerycznego rozwiązania tych równań. Jako rozwiązania są zmiany w czasie zmiennych stanu ruchu samolotu oraz przebiegi sterowania samolotem wymagane dla ścisłej realizacji więzów programowych. Otwiera to nowe możliwości analizy symulowanych manewrówsamolotu oraz oceny ich realizowalności. Przytaczne są wybrane wyniki symulacji numerycznej.
Źródło:
Journal of Theoretical and Applied Mechanics; 2001, 39, 1; 79-103
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomechanical modelling for whole body motion using natural coordinates
Biomechaniczne modelowanie trójwymiarowych ruchów człowieka w środowisku współrzędnych naturalnych
Autorzy:
Czaplicki, A.
Silva, M. T.
Ambrosio, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/281844.pdf
Data publikacji:
2004
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
biomechanical model
multibody dynamics
inverse dynamics
internal forces
Opis:
The study of spatial human movements requires the development and use of a three-dimensional model. The model proposed here has 44 degrees-of-freedom and it is described using natural coordinates, which do not require an explicit definition of rotation coordinates. The biomechanical model consists of 16 anatomical segments composed of 33 rigid bodies. Joint actuators are introduced into equations of motion of the multibody model by means of kinematic driver constrains in order to reflect the effect of the muscle forces about each anatomical joint. After associating a Lagrange multiplier to each joint actuator, the torques that represent muscle forces become coupled with the biomechanical model through the Jacobian matrix of the underlying multibody system. The developed model is applied to identify net torques and reaction forces at the anatomical joints in application cases that include the take-off to aerial trajectories and standing backwards somersault.
W pracy zaprezentowano pełną metodologię do badania ruchów człowieka. Podstawowym elementem tej metodologii jest trójwymiarowy biomechaniczny model ciała ludzkiego. Położenia członów modelu opisano za pomocą współrzędnych naturalnych, co wyeliminowało konieczność użycia współrzędnych kątowych. Model składa się z 33 ciał sztywnych połączonych przegubami (stawami) i posiada 44 stopnie swobody. Wypadkowe momenty sterujące w poszczególnych stawach pochodzące od sił mięśniowych wprowadzono do dynamicznych równań ruchu modelu za pomocą stosownych więzów kinematycznych pomiędzy sąsiadującymi członami w danym stawie. Wartości tych momentów wyznaczono wykorzystując formalizm mnożników Lagrange'a. Model wykorzystano do identyfikacji wypadkowych momentów mięśniowych i reakcji wewnętrznych w głównych stawach kończyny dolnej człowieka podczas odbicia do skoku w dal oraz w trakcie wykonywania salta w tył z miejsca.
Źródło:
Journal of Theoretical and Applied Mechanics; 2004, 42, 4; 927-944
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulational study of a hydraulicly driven parallel manipulator control system
Autorzy:
Frączek, J.
Wojtyra, M.
Dayliakos, I.
Papadopoulos, E.
Powiązania:
https://bibliotekanauki.pl/articles/243340.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
robotics
control
dynamics
simulation
parallel manipulators
inverse dynamics models
Opis:
A simulational model of 6 dof Stewart platform type parallel manipulator is presented. The manipulator is driven by electrohydraulic actuators. The developed control scheme employs the dynamic and hydraulic model of the system. The manipulator model consists of the rigid body equations of motion and the hydraulic dynamics of the main elements. Friction is included in the model. Two well-known software packages, one designed to perform control system simulation and the other dedicated to multibody simulation, are simultaneously used to conduct the study. The aim of the study is to check if it is the impact of dynamics model accuracy on the quality of control process. The simplifications of the model and the problems with finding accurate values of its parameters (especially friction parameters) are considered. The study helps to predict the possible results of inaccurate determination of the crucial model parameters. The simulation results show, that inverse dynamics model simplifications consisting in neglecting the mass of actuators have relatively little influence on the control quality. The effects of actuators masses neglecting can be reduced by appropriate changes in the modelled mass of the platform. The study shows that friction effects should be introduced to the inverse dynamics model and the friction parameters should be identified with possibly big accuracy. The parameters describing stiction-friction transition effects are the crucial ones.
Źródło:
Journal of KONES; 2008, 15, 1; 51-67
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control Methods Design for a Model of Asymmetrical Quadrocopter
Autorzy:
Beniak, R.
Gudzenko, O.
Powiązania:
https://bibliotekanauki.pl/articles/384229.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
linear quadratic regulator
inverse dynamics
quadrocopter
dynamic mode
Opis:
The paper describes the results of quadrocopters motion properties for the control based on the inverse dynamics method and optimal control method with synthesis linear-quadratic regulator (LQR). Motion of quadrocopters is tested for composite trajectories. The new model of asymmetrical quadrocopters, taking into account the rotation and shift of one arm relative to the other, was developed. A few criteria for evaluation of the effectiveness of control methods of quadrocopters are presented in this paper. An analysis of the results allows selecting a method for solving the problem of quadrocopters control and making recommendations for the formation of trajectories.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2016, 10, 2; 40-49
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A case study of inverse dynamics control of manipulators with passive joints
Autorzy:
Blajer, W.
Kołodziejczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/279450.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse dynamics
underactuated manipulators
passive joints
servo-constraints
Opis:
Manipulators with both active and passive joints are examples of underactuated systems, featured by less control inputs than degrees of freedom. Due to the underactuation, in the trajectory tracking (servo-constraint) problem, the feed-forward control obtained from an inverse model is influenced by internal dynamics of the system, leading to a more involved control design than in the fully actuated case. It is demonstrated that a convenient approach to the problem solution is to formulate the underactuated system dynamics in the input-output normal form, with the arising governing equations formulated either as ODEs (ordinary differential equations) or DAEs (differential-algebraic equations). The interrelationship between the inverse dynamics control and the associated internal dynamics is then studied and illustrated using a planar manipulator with two active and one passive joint. Some simulation results for the sample case study are reported.
Źródło:
Journal of Theoretical and Applied Mechanics; 2014, 52, 3; 793-801
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution of inverse dynamics of Stewart–Gough platform using substructure technique
Autorzy:
Tien, Tran Xuan
Cirkl, David
Powiązania:
https://bibliotekanauki.pl/articles/1839683.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse dynamics
Stewart-Gough platform
parallel manipulation
substructure technique
Opis:
The inverse dynamics method is applied to the investigation of dynamical behavior of a parallel manipulator. The substructure technique is used for creating a differential-algebraic system of equations that describes motion of the Stewart-Gough platform. The system of equations is modified into a set of linear differential equations for the determination of the solution of the inverse dynamics problem. A computational algorithm is developed to solve the inverse dynamics of the manipulator. Several trajectories of the moving platform are simulated as a result of the inverse dynamics problem of the Stewart-Gough platform according to the substructure technique.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 3; 329-342
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of underactuated mechanical systems in partly specified motion
Modelowanie sterowanych układów mechanicznych realizujących ruch programowy niezupełny
Autorzy:
Blajer, W.
Kołodziejczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/281657.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
systemy odwrotne
dynamika odwrotna
underactuated systems
inverse dynamics
differential flatness
servo-constraints
Opis:
This paper deals with the inverse dynamics problem of underactuated mechanical systems subjected to execute partly specified motions. The modeling methodology focuses on a special class of differentially flat systems, represented by a group of relevant technical examples. The governing equations are obtained as index three differential-algebraic equations, and a simple numerical code for their solution is reported. The solution comprises both the dynamic analysis of the underactuated systems in partly specified motion and the synthesis of control that assures realization of such motion.
Praca dotyczy zagadnienia symulacji dynamicznej odwrotnej klasy układów mechanicznych, w których liczba sygnałów sterowania, równa liczbie zadanych charakterystyk ruchu (sygnałów wyjściowych), jest mniejsza od liczby stopni swobody, reprezentowanej przez liczne przykłady techniczne. Równania tak zdefiniowanego ruchu programowego niezupełnego otrzymywane są w postaci równań różniczkowo-algebraicznych o indeksie równym trzy. Omawiany jest prosty, efektywny i stabilny algorytm całkowania tych równań. Rozwiązaniem są przebiegi w czasie zmiennych stanu układu w zadanym ruchu programowym oraz sterowania wymaganego dla realizacji tego ruchu.
Źródło:
Journal of Theoretical and Applied Mechanics; 2008, 46, 2; 383-394
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Similarity of different lifting techniques in trunk muscular synergies
Autorzy:
Mirakhorlo, M.
Azghani, M. R.
Powiązania:
https://bibliotekanauki.pl/articles/306737.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mięśnie
synergia
optymalizacja
dynamika odwrotna
trunk muscle synergies
lifting techniques
optimization
inverse dynamics
Opis:
Lifting is known to be a major reason for musculoskeletal injuries. In this way, lifting has a crucial effect on human musculoskeletal system and intensity of this impact depends slightly on the selection of techniques. Underlying mechanisms by which trunk muscles are executed during performing lifting are central to biomechanical study of lifting techniques. In the current study, the trunk muscular control mechanisms of lifting are investigated using the synergetic control analysis. Non-negative matrix factorization has been used to extract trunk muscles synergies from their activities – which are computed by a previously validated musculoskeletal model – during different lifting techniques aimed to investigate motor control strategies. Three lifting techniques are considered; stoop, squat and semi-squat. Three synergies account for variety among muscle activation of trunk muscles with related VAF (Variability Account For) of over 95%. Trunk muscle synergy weightings and related time-varying coefficients are calculated for each kind of lifting techniques considering three synergies. Paired correlation coefficients between muscle synergies are all greater than 0.91 (P < 0.05) suggesting that trunk muscle synergies are similar for examined techniques in spite of their kinematic diversity. This similarity can be a result of their common ultimate goal. The acquired results also elucidate the mechanisms of muscle activation patterns that can be exploited in future studies and ergonomic interventions.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 4; 21-29
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A process of gyroscope motion control in an autonomus system of target detection and tracking
Autorzy:
Koruba, Z.
Powiązania:
https://bibliotekanauki.pl/articles/279537.pdf
Data publikacji:
1999
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
gyroscope
control
inverse problem of dynamics
Opis:
A control algoritm of a three-degree-of-freedom gyroscope axis motion emerging from a solution to the inverse problem of dynamic is presented in the paper. A complete system of non-linear differential equations represents the motion of axis of a gimballed gyroscope (i.e. mounted in the Cardan joint), including both the inertial parameters of all elements and resisting forces acting in joint bearings. The effects of the following factors : initial conditions choice, disturbances, as well as non-linearity, on precision of gyro-axis required motion realisation is presented. Optimal parameters of the control algoritm correcting the gyro-axis motion are determined, as well.
W pracy przedstawiono wyniki sterowania ruchem osi giroskopu o trzech stopniach swobody, którego program sterowania jest wyznaczany za pomocą tzw. metod odwrotnych dynamiki. Ruch osi giroskopu, zawieszonego na przegubie Cardana, został opisany pełnym układem nieliniowych równań różniczkowych z uwzględnieniem bezwładności wszystkich elementów giroskopu oraz sił oporu w łożyskach przegubu. Pokazano wpływ warunków początkowych, zakłóceń oraz nieliniowości na dokładność realizacji ruchu programowego osi giroskopu. Wyznaczono parametry optymalne sterowań stabilizujących ruch osi giroskopu.
Źródło:
Journal of Theoretical and Applied Mechanics; 1999, 4; 909-927
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Muscle Forces and Joint Reaction in Lower Limbs During the Take-Off from the Springboard
Autorzy:
Dziewiecki, K.
Mazur, Z.
Blajer, W.
Powiązania:
https://bibliotekanauki.pl/articles/386808.pdf
Data publikacji:
2012
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
szkielet
symulacja
siła mięśniowa
musculoskeletal human models
inverse dynamics simulation
muscle forces
joint reactions
Opis:
Computer simulation methods, based on the biomechanical models of human body and its motion apparatus, are commonly used for the assessment of muscle forces, joint reactions, and some external loads on the human body during its various activities. In this paper a planar musculoskeletal model of human body is presented, followed by its application to the inverse simulation study of a gymnast movement during the take)off from the springboard when performing the handspring somersault vault on the table. Using the kinematic da) ta of the movement, captured from optoelectronic photogrammetry, both the internal loads (muscle forces and joint reactions) in the gym) nast’s lower limbs and the external reactions from the springboard were evaluated. The calculated vertical reactions from the springboard were then compared to the values assessed using the captured board displacements and its measured elastic behaviors.
Źródło:
Acta Mechanica et Automatica; 2012, 6, 4; 11-14
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamics and control of rotary cranes executing a load prescribed motion
Dynamika i sterowanie żurawiem wieżowym realizującym zadany ruch ładunku
Autorzy:
Blajer, W.
Kołodziejczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/280736.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
manewrowanie ruchem ładunku
sterowanie żurawiem
żurawie wieżowe
ruch ładunku
rotary cranes
inverse dynamics control
servo-constraints
Opis:
Manipulating payloads with rotary cranes is challenging due to the underactuated nature of a system in which the number of control inputs/outputs is smaller than the number of degrees-of-freedom. In this paper, the outputs (specified in time load coordinates) lead to servo-constraints on the system. A specific methodology is then developed to solve the arising inverse dynamics problem. Governing equations are derived as a set of index three differential-algebraic equations in state variables and control inputs. An effective numerical code for solving the equations, based on the backward Euler method, is proposed. A feedforward control law obtained this way is then enhanced by a closed-loop control strategy with feedback of actual errors in the load position to provide stable tracking of the required reference load trajectory in presence of perturbations. Some results of numerical simulations are provided.
Manewrowanie ruchem ładunku przez żurawie wieżowe jest zadaniem trudnym między innymi ze względu na fakt, że liczba kanałów sterowania (równa liczbie regulowanych współrzędnych ładunku) jest mniejsza od liczby stopni swobody żurawia. W pracy zadane w czasie współrzędne ładunku prowadzą do sformułowania serwowięzów (więzów programowych) nakładanych na ruch układu. Prezentowana jest następnie metoda rozwiązania tego szczególnego zadania symulacji dynamicznej odwrotnej jako zadania ruchu programowego niezupełnego. Równania ruchu programowego formułowane są w postaci układu równań różniczkowo-algebraicznych o indeksie trzy, względem zmiennych stanu i parametrów sterowania żurawiem. Proponowana jest prosta i skuteczna metoda numerycznego całkowania tych równań, wykorzystująca schemat Eulera różnic skończonych wstecznych. Otrzymane tą drogą sterowanie nominalne uzupełniane jest następnie sterowaniemw układzie zamkniętym zapewniającym stabilną realizację programowego ruchu ładunku w warunkach ruchu zaburzonego i nieścisłości modelowania matematycznego. Prezentowane są wybrane wyniki numerycznej symulacji ruchu i sterowania żurawiem realizującym zadany ruch ładunku.
Źródło:
Journal of Theoretical and Applied Mechanics; 2006, 44, 4; 929-948
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Adaptive Control for an Asymmetric Quadcopt
Opracowanie sterowania adaptacyjnego dla quadrocoptera asymetrycznego
Autorzy:
Beniak, Ryszard
Gudzenko, Oleksandr
Powiązania:
https://bibliotekanauki.pl/articles/275241.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
quadcopter
adaptive control
inverse dynamics
full state feedback
wind
quadrocopter
sterowanie adaptacyjne
odwrotna dynamika
przesuwanie biegunów
wiatr
Opis:
The paper presents an adaptive control algorithm for an asymmetric quadcopter. For determining the control algorithm, the identification was made, and an identification algorithm is presented in the form of a recursive method. The control method is realized using inverse dynamics, full state feedback and finally adaptive control method. The algorithms for the off-line and on-line identification of quadcopter model parameters are also presented. The paper shows the effectiveness of the selected algorithm on the example of the movement along a given trajectory. Finally, recommendations of the application of these different methods are made.
W pracy przedstawiono algorytm sterowania adaptacyjnego dla asymetrycznego quadrocoptera. W celu określenia sterowania zrealizowano identyfikację parametrów i przedstawiono algorytm identyfikacji w formie metody rekurencyjnej. Metoda sterowania realizowana jest z wykorzystaniem dynamiki odwrotnej, przesuwania biegunów oraz sterowania adaptacyjnego. Zaprezentowano algorytmy identyfikacji parametrów modelu quadrocoptera w trybie off-line i on-line. W artykule przedstawiono skuteczność wybranych algorytmów na przykładzie ruchu wzdłuż podanej trajektorii. Na zakończenie artykułu przedstawiono zalecenia dotyczące stosowania różnych metod sterowania.
Źródło:
Pomiary Automatyka Robotyka; 2020, 24, 3; 29-35
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Artillery-Missile System Control Under Disturbances Conditions Using a Modified Computed Torque Control Method
Sterowanie zestawem artyleryjsko-rakietowym w warunkach występowania zakłóceń za pomocą zmodyfikowanej metody opartej o dynamikę odwrotną
Autorzy:
Szmidt, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/403528.pdf
Data publikacji:
2019
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
automatics and robotics
control
artillery-missile system
inverse dynamics
disturbances
automatyka i robotyka
sterowanie
zestaw artyleryjsko-rakietowy
dynamika odwrotna
zakłócenia
Opis:
The paper addresses the issue of remote control of a artillery-missile system when the system is affected by dynamic and kinematic disturbances. The dynamic disturbances analysed in the paper includes disturbances from shots fired while kinematic disturbances are excitation related to the motion of the base on which the system is installed. The object of the study is a system model based on the ZU-23-2MR artillery-missile system produced and operated in Poland, designed to combat lightly armoured air, naval and ground targets. Once the system model and the assumed disturbance types are discussed, further in the paper the system control in azimuth and elevation angular position is analysed. Computed torque control with additional corrective components is presented. A certain inertia in system drive models is also adopted. Additionally, uncertainty of model identification is assumed, i.e. object control parameters are different from the parameters of the model which serves as basis for calculating the control parameters. Differences in weights, mass moments of inertia and friction torques arising in the system's drive elements are taken into account. The last part of the paper includes an analysis of the speed of target interception and precision of tracking a manoeuvring aerial target with the interference affecting the system. It was assumed that the system is located on a ship, therefore kinematic disturbances are related to the ship's movement on the sea waves, as well as dynamic disturbances are related to firing the weapon. All simulations were performed in the Scilab environment for a non-linear model of the system. Essential results are shown in a graphical form.
W pracy zajęto się zagadnieniem sterowania zdalnie sterowanym zestawem artyleryjsko-rakietowym w warunkach oddziaływania na zestaw zakłóceń dynamicznych i kinematycznych. Do analizowanych w artykule zakłóceń dynamicznych należy zaliczyć zakłócenia pochodzące od strzałów, zaś zakłócenia kinematyczne stanowią zakłócenia związane z ruchem podstawy, na której posadowiony jest zestaw. Obiekt badań stanowi model zestawu oparty o stosowany i produkowany w Polsce zestaw artyleryjsko-rakietowy typu ZU-23-2MR, który przeznaczony jest do zwalczania lekko opancerzonych celów powietrznych, nawodnych i lądowych. Po omówieniu modelu zestawu jak i modelu przyjętych zakłóceń, w dalszej części pracy poddano analizie układ sterowania położenia kątowego w azymucie i elewacji wyżej wymienionego zestawu. Przedstawiono sterowanie oparte o metodę dynamiki odwrotnej z dodatkowymi członami korygującymi. Przyjęto także pewną inercję w modelach napędu układów. Dodatkowo, założono niepewność identyfikacji modelu, tj. parametry obiektu sterowania są różnie od parametrów modelu, który stanowi podstawę do obliczenia wartości sterujących. Uwzględniono przy tym różnicę w masach, masowych momentach bezwładności oraz momentach tarcia powstających w układach napędowych zestawu. Ostatnia część pracy obejmuje analizę szybkości przechwycenia i dokładności śledzenia manewrującego celu powietrznego przy działających na zestaw zakłóceniach. Założono, że zestaw znajduje się na okręcie, pojawiają się zatem zakłócenia kinematyczne związane z ruchem okrętu na fali morskiej, a także zakłócenia dynamiczne wynikające z oddawania strzałów. Wszystkie symulacje zostały przeprowadzone w środowisku Scilab i dla nieliniowego modelu zestawu. Najistotniejsze wyniki przedstawiono w postaci graficznej.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2019, 10, 1 (35); 75-90
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Force ratio in masticatory muscles after total replacement of the temporomandibular joint
Autorzy:
Vilimek, M.
Horak, Z.
Baca, W.
Powiązania:
https://bibliotekanauki.pl/articles/307085.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dynamika odwrotna
optymalizacja statyczna
staw skroniowo-żuchwowy
siły mięśniowe
inverse dynamics
static optimization
temporomandibular joint
muscle forces
mastication
FE analyses
Opis:
The temporomandibular (TM) joint is one of the most active joints in the human body, and any defect in this joint has a significant impact on the quality of life. The objective of this study was to analyze changes in the force ratio after TM joint replacement on contralateral TM joint loading. Implantation of an artificial TM joint often requires removal of 3 of the 4 masticatory muscles (activators). In order to perform true loading of the TM joint, loading during mastication was investigated. Input kinematic variables and mastication force were experimentally examined. The inverse dynamics approach and static optimization technique were used for solution of the redundant mechanism. Muscle forces, and reactions in the TM joint were calculated. We modified the model for several different tasks. The m. temporalis and m. masseter were removed individually and together and the forces of mastication on the TM joint were calculated for each variation. To evaluate the results, a parametric numerical FE analysis was created to compare the magnitude of the TM joint loading during the bite process for four different muscle resections. The results show an influence relative to the extent of muscle resection on contralateral TM joint loading in a total TM joint replacement. The biggest increase in the loading magnitude on the contralateral TM joint is most evident after m. masseter and m. temporalis resection. The results from all simulations support our hypothesis that the greater the extent of muscle resection the greater the magnitude of contralateral TM joint overloading.
Źródło:
Acta of Bioengineering and Biomechanics; 2016, 18, 3; 131-136
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uwagi o wyznaczaniu danych somatycznych człowieka dla zadań symulacji dynamicznej
Remarks on assessment of human body properties for inverse dynamics simulation
Autorzy:
Mazur, Z.
Dziewiecki, K.
Blajer, W.
Powiązania:
https://bibliotekanauki.pl/articles/99108.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Katedra Biomechatroniki
Tematy:
układ biomechaniczny
ruch człowieka
symulacja dynamiczna odwrotna
siły mięśniowe
dane somatyczne
biomechanical system
human motion
inverse dynamics simulation
muscular force
human body properties
Opis:
Jakość uzyskiwanych wyników symulacji dynamicznej odwrotnej układów biomechanicznych jest wypadkową wielu czynników: adekwatności modelu matematycznego, poprawności algorytmu obliczeniowego, techniki pozyskiwania danych kinematycznych oraz precyzyjnej identyfikacji parametrów masowo-geometrycznych modelu. Niniejsza praca dotyczy tego ostatniego czynnika. Pokazane są różnice przy wyznaczaniu danych somatycznych zależnie od zastosowanej metody oraz formułowane wnioski o charakterze praktycznym.
Quality of results from inverse dynamics simulation of biomechanical systems depends on many factors: adequacy of the mathematical model used, correctness of the computational schemes, precision of recorded kinematic data, and exactness of identified inertial and geometric parameters of the modeled body. The present paper is focused on the latter issue. Differences in the inertial and geometric parameters are shown when using various methods and sources from the literature, which vividly influence the (reported) results obtained from the inverse dynamics simulation.
Źródło:
Aktualne Problemy Biomechaniki; 2011, 5; 89-94
1898-763X
Pojawia się w:
Aktualne Problemy Biomechaniki
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies