Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "innovative casting materials" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 42
Tytuł:
Kinetics of hardening and drying of ceramic moulds with the new generation binder – colloidal silica
Autorzy:
Zych, J.
Kolczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/381420.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
colloidal binder
investment casting
drying rate
technological factor
innowacyjna technologia odlewnicza
innowacyjne materiały odlewnicze
spoiwo koloidalne
szybkość suszenia
czynnik technologiczny
Opis:
The influence of selected factors on drying ceramic moulds applied in the investment casting technology was determined by the gravimetric method. Moulds produced of ceramic sands based on the new generation binders – colloidal silica, were investigated. It was found that each successive layer, of a similar thickness, is drying longer than the previous one. The drying time of layers forming closed spaces is several times longer as compared with drying open surfaces (external). Grain size of matrix used for moulds sprinkling has none significant influence on drying rates.
Źródło:
Archives of Foundry Engineering; 2013, 13, 4; 112-116
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New investigation method of the permeability of ceramic moulds applied in the investment casting technology
Nowa metoda oceny przepuszczalności form ceramicznych stosowanych w technologii wytapianych modeli
Autorzy:
Zych, J.
Kolczyk, J.
Snopkiewicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/379502.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
investment casting technology
permeability
ceramic mould
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
technologia wytapianych modeli
przepuszczalność
forma ceramiczna
Opis:
The new investigation method of a permeability of ceramic moulds applied in the investment casting technology, is presented in the paper. Some concepts of performing permeability measurements are shown. Investigations in which the influence of the solid phase fraction in the liquid ceramic moulding sand (LCMS) on a permeability of a multi-layer ceramic mould were performed and discussed. The permeability was estimated during two the most important stages of the technological process: in the first – after wax melting and in the second – after mould annealing. Also an influence of the matrix grain sizes (material for sprinkling) on a ceramic mould permeability was estimated.
W pracy przedstawiono nową metodę badań przepuszczalności form ceramicznych stosowanych w technologii wytapianych modeli. Zaprezentowano koncepcje prowadzenia pomiarów przepuszczalności form ceramicznych. Wykonano badania, w których określono wpływ udziału fazy stałej w ciekłej masie ceramicznej (CMC) na przepuszczalność wielowarstwowej formy ceramicznej. Oceniono przepuszczalność w dwóch najważniejszych etapach procesu technologicznego: w pierwszym - po wytopienia wosku oraz w drugim - po wyżarzeniu formy. Oceniono również wpływ wielkości ziarna osnowy, zwanej potocznie „obsypką” (materiałem do obsypywania), na przepuszczalność formy ceramicznej.
Źródło:
Archives of Foundry Engineering; 2013, 13, 2; 107-112
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of an Advanced Cellulose Profile Used for the Manufacture of Gating Systems
Autorzy:
Zawieja, Z.
Sawicki, J.
Gumienny, G.
Sobczyk-Guzenda, A.
Powiązania:
https://bibliotekanauki.pl/articles/380939.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting technologies
innovative casting materials
cellulose profiles
gating system
aluminium silicates
gray cast iron
ausferrite
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
glinokrzemiany
żeliwo szare
Opis:
The here in paper contains the results of investigations on a new type of cellulose blend used for the manufacture of profiles applied in the process of making gating systems in the foundry industry. A standard cellulose profile was subjected to an experiment. During the experiment the profile was filled with a liquid cast iron and at the same time the temperatures of the liquid metal crystallizing inside the profile were measured as well as the temperature of the outer layer of the profile was controlled. Further, the microstructure of the cast iron, which crystallized out inside the cellulose profile, was analysed and the cellulose, thermally degraded after the experiment, was verified with the use of the chemical analysis method. Moreover, a quality analysis of the original as well as the degraded cellulose profile was run with the use of the FTIR infrared spectroscopy. The presented results revealed that the cellulose blend is aluminium silicate enriched and contains organic binder additives. The cast iron, which crystallized out, tended to have an equilibrium pearlitic structure with the release of graphite and carbides. The generation of disequilibrium ausferrite phases was also observed in the structure.
Źródło:
Archives of Foundry Engineering; 2014, 14, 3; 123-128
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Crystallization Process of Intensive Cooled AlSi20CuNiCoMg Alloy
Autorzy:
Władysiak, R.
Kozuń, A.
Dębowska, K.
Pacyniak, T.
Powiązania:
https://bibliotekanauki.pl/articles/379541.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
silumin
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
Opis:
The work is a continuation of research concerning the influence of intensive cooling of permanent mold in order to increase the casting efficiency of aluminium alloys using the multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of multicomponent synthetic hypereutectic alloy AlSi20CuNiCoMg. The study was conducted for unmodified silumin on the research station allowing the cooling of the special permanent sampler using a program of computer control. Furthermore the study used a thermal imaging camera to analyze the solidification process of multicomponent alloy. The study demonstrated that the use of mold cooled with water mist stream allows in wide range to form the microstructure of hypereutectic multicomponent silumin. It leads to higher homogeneity of microstructure and refinement of crystallizing phases of casting.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 137-144
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer control the cooling process in permanent mold casting of Al-Si alloy
Sterowanie komputerowe procesem chłodzenia formy w odlewaniu kokilowym siluminów
Autorzy:
Władysiak, R.
Powiązania:
https://bibliotekanauki.pl/articles/353901.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative materials & casting technologies
cooling
water mist
Al-Si alloy
innowacyjne materiały i technologie odlewnicze
chłodzenie
mgła wodna
stop Al-Si
Opis:
The paper presents the test results of a computerized control system the sequential cooling process of permanent mold with use of water mist in the gravity die casting process. It describes the process for preparing high-quality casts made of AlSi7Mg alloy that achieves enhanced mechanical properties. A scheme of developed device and drivers for selected methods of sequence cooling for manufacturing of castings made in permanent steel mold was presented here. Also the microstructure and mechanical properties of received aluminium casts were described. It was shown that the use of a computer system to control the water mist cooling point of the mold not only accelerates the cooling of the cast and the gravity die casting cycle shortens, but also it has a positive effect on the microstructure and mechanical properties of castings made of unmodified AlSi7Mg alloy in a raw state.
W pracy przedstawiono wyniki badań komputerowego systemu sterowania sekwencyjnym chłodzeniem kokili mgła wodna w odlewaniu grawitacyjnym. Opisano proces otrzymywania wysokojakościowych odlewów z siluminu AlSi7Mg o podwyższonych właściwościach mechanicznych. Przedstawiono opracowane urządzenie, programy sterujące dla zadanych metod wytwarzania odlewów kokilowych i sekwencji chłodzenia. Przedstawiono mikrostrukturę i własności mechaniczne otrzymanych odlewów siluminowych. W pracy wykazano, że zastosowanie systemu komputerowego do sterowania chłodzeniem punktowego mgła wodna nie tylko przyspiesza stygnięcie odlewu i skraca cykl odlewania kokilowego, ale również korzystnie wpływa na mikrostrukturę i własności mechaniczne odlewów z niemodyfikowanego siluminu AlSi7Mg w stanie surowym.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 3; 977-980
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of multipoint sequential water mist cooling of casting die on microstructure and mechanical properties of AlSi11 alloy
Autorzy:
Władysiak, R.
Powiązania:
https://bibliotekanauki.pl/articles/380430.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
AlSi11
mikrostruktura
właściwości mechaniczne
innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
microstructure
mechanical properties
Opis:
The work is a continuation of research on the use of water mist cooling in order to increase efficiency of the die-casting process for aluminum alloys. The paper describes the multipoint sequential cooling system of the casting die and its computer control and monitoring. It also includes results of the tests and analysis of cooling methods during making of the casting. These methods differ from each other in the sequence of casting die cooling and cause effective changes in microstructure and mechanical properties of castings made of AlSi11 alloy. The study demonstrated that the use of multipoint sequential cooling with water mist affects the microstructure refinement and reduces the segregation in the cast as well as more than by 20% increases the mechanical properties of castings in the rough state. The study also demonstrates that the sequential cooling of casting die accelerates the cooling of the casting and shortens die-casting cycle.
Źródło:
Archives of Foundry Engineering; 2012, 12, 4; 145-150
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Water Mist Cooling on Microstructure of Hypereutectic Al-Si Alloy
Autorzy:
Władysiak, R.
Kozuń, A.
Powiązania:
https://bibliotekanauki.pl/articles/382973.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
hypereutectic silumin
microstructure
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
chłodzenie
silumin nadeutektyczny
mikrostruktura
Opis:
The work is a continuation of research on the use water mist cooling in order to increase efficiency of die-casting aluminum alloys using multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of synthetic hypereutectic AlSi20 alloy. Casts were made in permanent mold cooled with water mist stream. The study was conducted for unmodified AlSi20 alloy and modified with phosphorus, titanium and boron on the research station allowing sequential multipoint cooling using a dedicated program of computer control. The study demonstrated that the use of mold cooled with water mist stream allows the formation of the microstructure of hypereutectic silumins. A wide range of solidification temperature of hypereutectic silumins increases the potential impact of changes in the cooling rate on a size, a number and a morphology of preeutectic silicon and eutectic α+β (Al+Si).
Źródło:
Archives of Foundry Engineering; 2014, 14, 3; 117-122
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selection of materials and development of technology for the production of elements used in conditions of extreme tribological wear
Autorzy:
Wilk-Kołodziejczyk, D.
Pirowski, Z.
Grudzień-Rakoczy, M.
Bitka, A.
Chrzan, T.
Powiązania:
https://bibliotekanauki.pl/articles/2079807.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting technologies
wear
selection of materials
conditions of extreme
shell mold
innowacyjne technologie odlewnicze
zużycie tribologiczne
dobór materiałów
warunki ekstremalne
Opis:
Work was done as a part of the project " New generation haulage system of highly productive longwall systems" aiming to develop and implement a new longwall shearer system called KOMTRACK. The widely used EICOTRACK feed system developed forty years ago is not adapted to modern longwall shearers' power. Within the project, an innovative, flexible feed system with a modular structure was created with the possibility of continuous adjustment to the carbon wall's unevenness. Newly-developed three cast steels variants have been initially selected to fabricate this system's elements. The material's final selection was realized based on the tensile tests, Charpy impact tests, Brinell hardness surveys, and wear resistance measurements. Results analysis allowed to select cast steel marked as "2", which fulfilled all requirements and was used in further casting trials.
Źródło:
Archives of Foundry Engineering; 2021, 21, 4; 47-54
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cr and W on the Crystallization Process, the Microstructure and Properties of Hypoeutectic Silumin to Pressure Die Casting
Autorzy:
Szymczak, T.
Gumienny, G.
Pacyniak, T.
Powiązania:
https://bibliotekanauki.pl/articles/381777.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
theory of crystallization
innovative foundry
innovative foundry materials
pressure die casting
multicomponent silumin
DTA method
teoria krystalizacji
innowacyjna odlewnia
innowacyjne materiały odlewnicze
odlewnictwo ciśnieniowe
siluminy
metoda DTA
Opis:
This article presents the results of studies in the hypoeutectic silumin destined for pressure die casting with the simultaneous addition of chromium and tungsten. The study involved the derivative and thermal analysis of the crystallization process, metallographic analysis and mechanical properties testing. Silumin 226 grade was destined for studies. It is a typical silumin to pressure die casting. AlCr15 and AlW8 preliminary alloys were added to silumin. Its quantity allowed to obtain 0.1, 0.2, 0.3 and 0.4% of Cr and W in the tested alloy. Studies of the crystallization process as well as the microstructure of the silumin poured into DTA sampler allowed to state the presence of additional phase containing 0.2% or more Cr and W. It has not occurred in silumin without the addition of above mentioned elements. It is probably the intermetallic phase containing Cr and W. DTA studies have shown this phase crystallizes at a higher temperature range than α (Al) solid solution. In the microstructure of each pressure die casting containing Cr and W the new phases formed. Mechanical properties tests have shown Cr and W additives in silumin in an appropriate amount may increase its tensile strength Rm (about 11%), the yield strength Rp0.2 (about 21%) and to a small extent elongation A.
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 109-114
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Moulding sands with new inorganic binders - ecology assessment in the aspect of work environment
Autorzy:
Szanda, I.
Żmudzińska, M.
Faber, J.
Perszewska, K.
Powiązania:
https://bibliotekanauki.pl/articles/380365.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
odlewnictwo
masa formierska
spoiwo nieorganiczne
środowisko pracy
innovative foundry materials
innovative foundry technologies
casting
moulding sand
inorganic binders
work environment
Opis:
The development of economy and industry introducing new technologies and materials often means the increased threat of occurrence of factors harmful to humans and environment. Workers employed in foundries as mould pourers are the group of high professional risk. Foundry moulding sands when poured with liquid metal are a source of the emission of harmful, toxic and carcinogenic (benzene, PAHs) compounds. The paper presents the results of studies on the concentration of chemical compounds emitted in the process of casting aluminium alloy and brass using moulding sands with the new inorganic binders. The specific values of the exposure indices were compared with the limit values. This enabled an assessment of the impact of moulding sands on work environment. The obtained results were compared with the values of contaminants emitted when pouring foundry moulds made from furan sands and bentonite sands with an addition of coal dust.
Źródło:
Archives of Foundry Engineering; 2012, 12, 3; 117-122
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of a New Innovative Ceramic Material for Investment Casting Technology
Autorzy:
Stefański, Z.
Izdebska-Szanda, I.
Angrecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/381703.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry materials
investment casting technology
olivine sand
self-supporting mould
Innowacyjna technologia odlewnicza
innowacyjne materiały odlewnicze
odlewnictwo
forma odlewnicza
Opis:
The article presents the research results of a new ceramic material, in which olivine sand was used as the matrix. This new ceramic material was studied at the angle of its application in the investment casting technology. This material will be mainly used for preparing self-supporting moulds for castings made of aluminium and magnesium alloys, replacing the expensive material – molochite which has been used so far. The article presents the results of mineralogical research of olivine sand, as well as thermophysical research of the new ceramic material made on the olivine sand matrix. Comparative research of both materials was conducted, i.e. with the olivine and molochite matrix, then the assessment of the quality of the new ceramic material was made. What is more, the research results of the developed ceramics and its usefulness for the production of castings are presented.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1 spec.; 51-56
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3DP Technology for the Manufacture of Molds for Pressure Casting
Autorzy:
Skorulski, G.
Powiązania:
https://bibliotekanauki.pl/articles/383141.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative materials
innovative casting technologies
rapid prototyping
ceramic mold
pressure casting
materiały innowacyjne
innowacyjne technologie odlewnicze
prototypy
formy ceramiczne
odlewanie ciśnieniowe
Opis:
The paper presents the use of rapid prototyping technology of three dimensional printing (3DP) to make a prototype shell casting mold. In the first step, for identification purposes, a mold was prepared to enable different alloys to be cast. All molds being cast were designed in a universal CAD environment and printed with the zp151 composite material (Calcium sulfate hemihydrate) with a zb63 binder (2-pyrrolidone). It is designated to be used to prepare colourful models presenting prototypes or casting models and molds. The usefulness of 3DP technology for use with copper alloys, aluminum and zinc was analyzed. The strength of the mold during casting was assumed as a characteristic comparative feature in the material resistance to high temperature, the quality of the resulting casting and its surface roughness. Casting tests were carried out in vacuum – pressure casting. The casting programs applied, significantly increased the quality of castings and enabled precise mold submergence. Significant improvement was noted in the quality compared to the same castings obtained by gravity casting.
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 99-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of AM60 and AZ91 Alloy Crystallisation in Ceramic Moulds by Thermal Derivative Analysis (TDA)
Analiza krystalizacji stopów AM60 i AZ91 w formie ceramicznej metodą analizy termiczno-derywacyjnej (ATD)
Autorzy:
Rapiejko, C.
Pisarek, B.
Czekaj, E.
Pacyniak, T.
Powiązania:
https://bibliotekanauki.pl/articles/351541.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting materials and technologies
crystallisation
magnesium alloys
light alloys
TDA method
innowacyjne materiały i technologie odlewnicze
krystalizacja
magnez
stopy lekkie
metoda TDA
Opis:
The work presents the test results of the crystallisation and cooling of magnesium alloys: AM60 and AZ91, with the use of the TDA method. The tested alloys were cast into ceramic shells heated up to 180°C, produced according to the technology of the shell production in the investment casting method. The TDA method was applied to record and characterize the thermal effect resulting from the phase transformations occurring during the crystallisation of magnesium alloys. The kinetics and dynamics of the thermal processes of the crystallisation of AM60 and AZ91 in the ceramic shells were determined. Metallographic tests were performed with the use of an optical microscope as well as scanning microscopy, together with the EDS chemical analysis of the phases present in the tested casts. A comparison of these test results with the thermal effect recorded by way of the TDA method was made.
W pracy przedstawiono wyniki badań krystalizacji i stygnięcia stopów magnezu: AM60 i AZ91 przy użyciu metody ATD. Badane stopy zalewano do form ceramicznych podgrzanych do temperatury 180°C, wykonanych zgodnie z technologią wytwarzania form w metodzie traconych modeli. Przy pomocy metody ATD zarejestrowano i wyznaczono charakterystyczne efekty cieplne wynikające z przemian fazowych zachodzących podczas krystalizacji badanych stopów magnezu. Określono kinetykę i dynamikę procesów cieplnych krystalizacji stopów AM60 i AZ91 w formach ceramicznych. Przeprowadzono badania metalograficzne przy pomocy mikroskopu optycznego oraz mikroskopii skaningowej wraz z analizą chemiczną EDS występujących faz w badanych odlewach. Porównano wyniki tych badań z efektami cieplnymi zarejestrowanymi metodą ATD.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 4; 1449-1455
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Crystallization of AZ91 Alloy by Thermal and Derivative Analysis Method Intensively Cooled in Ceramic Shell
Autorzy:
Rapiejko, C.
Pisarek, B.
Czekaj, E.
Pacyniak, T.
Powiązania:
https://bibliotekanauki.pl/articles/380100.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting materials
innovative casting technology
magnesium alloys
TDA method
hardness
crystallization
alloy AZ91
innowacyjne materiały odlewnicze
innowacyjna technologia odlewania
metoda ATD
krystalizacja
stop AZ91
Opis:
The work presents the test result of the influence of cooling rate on the microstructure of AZ91 alloy, Vickers micro-hardness and Brinell hardness. Studies cooling and crystallization of AZ91 alloy was cast into the ceramic shells pre-heated to 180°C and then air-cooled at ambient temperature or intensively super cooled in the liquid coolant. The TDA method was applied to record and characterize the thermal effect resulting from the phase transformations occurring during the crystallization of AZ91 alloy. The kinetics and dynamics of the thermal processes of crystallization of AZ91 alloy in the ceramic shells were determined. Metallographic tests were performed with the use of an optical microscope. A comparison of these test results with the thermal effect recorded by way of the TDA method was made. Influence of cooling rate of AZ91 on HV0, 01 micro-hardness and Brinell hardness alloy was examined.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1; 97-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Casting ductile iron in layer moulds made from ecological sands
Autorzy:
Rączka, M.
Gandurski, K.
Isendorf, B.
Powiązania:
https://bibliotekanauki.pl/articles/380228.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
ochrona środowiska
żeliwo sferoidalne
forma dwuwarstwowa
innovative foundry materials
innovative foundry technologies
environmental protection
ductile iron
two layer moulds
casting examinations
Opis:
The article contains the results of tests performed under the target project in Hardtop Foundry Charsznica. The objective of the tests and studies was to develop a technology of making high-quality ductile iron castings, combined with effective means of environmental protection. The studies presented in this article related to castings weighing from 1 to 300 kg made from ductile iron of grades 400-15 and 500-7, using two-layer moulds, where the facing and core sand was the sand with an alkaline organic binder, while backing sand was the sand with an inorganic geopolymer binder. A simplified method of sand reclamation was applied with possible reuse of the reclaim as an addition to the backing sand. The cast iron spheroidising treatment and inoculation were selected taking into account the specific conditions of Hardtop Foundry. A pilot batch of castings was made, testing the gating and feeding systems and using exothermic sleeves on risers. The study confirmed the validity of the adopted concept of making ductile iron castings in layer moulds, while maintaining the content of sand with an organic binder at a level of maximum 15%.
Źródło:
Archives of Foundry Engineering; 2012, 12, 3; 99-104
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 42

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies