Temat: hull resistance - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Energy saving procedures for fishing vessels by means of numerical optimization of hull resistance
Autorzy:: Abramowski, T.
Sugalski, K.
Powiązania:: https://bibliotekanauki.pl/articles/135190.pdf
Data publikacji:: 2017
Wydawca:: Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:: CFD
hull shape optimization
fishing boat
hull resistance
OpenFoam
simulation
Opis:: This paper presents the general method for hull shape optimization of fishing boats with the objective of reducing resistance. In particular, it presents an example of the results of the application of resistance-reducing devices such as the ducktail, the cylindrical bulb and the streamlined bulbous bow. The resistance was determined using computational fluid dynamics (CFD). For the purpose of flow simulation, the OpenFoam system, distributed under an open source license, was used. The turbulent, unsteady flow with free surface liquid around the analyzed hulls was computed and investigated for potential resistance reduction. Ultimately, the calculation results were generalized by the parameterization of dimensionless geometric variables for the shape of a bulbous bow and were given in a form suitable for practical application in the hull design process.
Źródło:: Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2017, 49 (121); 19-27
1733-8670
2392-0378
Pojawia się w:: Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Numerical analysis of influence of ship hull form modification on ship resistance and propulsion characteristics. Part II. Influence of hull form modification on wake current behind the ship
Autorzy:: Abramowski, T.
Szelangiewicz, T.
Powiązania:: https://bibliotekanauki.pl/articles/259395.pdf
Data publikacji:: 2010
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: ship hull geometry
numerical (computational) fluid dynamics
resistance
wake
propeller efficiency
Opis:: After signing ship building contract shipyard’s design office orders performance of ship resistance and propulsion model tests aimed at, apart from resistance measurements, also determination of ship speed, propeller rotational speed and propulsion engine power for the designed ship, as well as improvement of its hull form, if necessary. Range of ship hull modifications is practically very limited due to cost and time reasons. Hence numerical methods, mainly CFD ones are more and more often used for such tests. In this paper consisted of three parts, are presented results of numerical calculations of hull resistance, wake and efficiency of propeller operating in non-homogenous velocity field, performed for research on 18 hull versions of B573 ship designed and built by Szczecin Nowa Shipyard.
Źródło:: Polish Maritime Research; 2010, 1; 3-9
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numerical analysis of influence of ship hull form modification on ship resistance and propulsion characteristics. Part III. Influence of hull form modification on screw propeller efficiency
Autorzy:: Abramowski, T.
Żelazny, K.
Szelangiewicz, T.
Powiązania:: https://bibliotekanauki.pl/articles/259371.pdf
Data publikacji:: 2010
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: ship hull geometry
numerical (computational) fluid dynamics (CFD)
resistance
wake current
propeller efficiency
Opis:: After signing ship building contract shipyard’s design office orders performance of ship resistance and propulsion model tests aimed at, apart from resistance measurements, also determination of ship speed, propeller rotational speed and propulsion engine power for the designed ship, as well as improvement of its hull form, if necessary. Range of ship hull modifications is practically very limited due to cost and time reasons. Hence numerical methods, mainly CFD ones are more and more often used for such tests. In this paper consisted of three parts, are presented results of numerical calculations of hull resistance, wake and efficiency of propeller operating in non-homogenous velocity field, performed for research on 18 hull versions of B573 ship designed and built by Szczecin Nowa Shipyard.
Źródło:: Polish Maritime Research; 2010, 1; 10-13
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Influence of armoured vehicles bottom shape on the pressure impulse
Autorzy:: Barnat, W.
Panowicz, R.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/243701.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: IED
improvised explosive device
mine resistance
armour
deflector
hull design
light armoured vehicle
Opis:: This paper presents the results of a numerical analysis of military vehicles hulls mine resistance. The research concerns armours loaded with blast wave from large IED charges in three cases. First is an explosion in Euler domain without any boundary conditions. Second consists of Euler domain with flat bottom and the ground. Third is simulated Euler domain with ground and deflector. Boundary conditions used both in second and third case resulted in growth of the pressure impulse due to the reflection from a rigid obstacle. In the article different hull bottom shapes are compared. The gap between the bottom and the ground is fixed in all cases. Explosion in Euler domain without limitations is added as a reference. The blast wave caused by the detonation (simulated as a point detonation) propagated in cubic mesh with appropriate boundary conditions. Theoretical solution of spherical non-linearity is given in a form of Taylor equations. It was used to verify the numerical model. The research showed that the ground proximity affects the results of the simulation. The pressure impulse is amplified due to the wave reflection from both the bottom of the vehicle and the ground. As well as that, the study confirmed that the usage of the deflector considerably reduces the impact load to the structure.
Źródło:: Journal of KONES; 2011, 18, 1; 39-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Application artificial neural networks for predicting wave resistance of ro-ro ferry in initial designing stage
Zastosowanie sztucznych sieci neuronowych do prognozowania dodatkowego oporu od fali promu ro-ro na wstępnym etapie projektowania
Autorzy:: Cepowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/360042.pdf
Data publikacji:: 2011
Wydawca:: Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:: prom ro-ro
sztuczne sieci neuronowe
dodatkowy opór od fali
aproksymacja
parametry kształtu kadłuba
ro-ro ferries
artificial neural networks
added wave resistance
approximation
hull shape parameters
Opis:: The paper presents approximations of added wave resistance useful in the early stage of designing ro-ro ferries. Reference added wave resistance values were calculated by means of SEAWAY software based on accurate numerical methods. Approximating function was elaborated by using the artificial neural networks. The model values were calculated by means of 448 ferry shape variants assuming conventional waving parameters and ferry movement parameters. Such approach permitted the replacement of the complicated numerical model with a simple analytical model based on basic hull shape parameters.
W pracy przedstawiono aproksymacje dodatkowego oporu od fali przydatne na wstępnym etapie projektowania promów ro-ro. Wartości wzorcowe dodatkowego oporu od fali obliczono przy użyciu programu SEAWAY. Aproksymacje opracowano za pomocą sztucznych sieci neuronowych. Wartości wzorcowe obliczono dla 448 wariantów kształtu promu, przyjmując umowne parametry falowania oraz parametry ruchu promu. Takie podejście pozwoliło zastąpić skomplikowany model numeryczny prostym modelem regresyjnym, bazującym na podstawowych parametrach geometrycznych kadłuba.
Źródło:: Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2011, 26 (98); 10-14
1733-8670
2392-0378
Pojawia się w:: Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Determination of optimum hull form for passenger car ferry with regard to its sea-keeping qualities and additional resistance in waves
Autorzy:: Cepowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/258898.pdf
Data publikacji:: 2008
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: sea-keeping qualities
roll-on/roll-off ferry ship
rolling
transverse accelerations
vertical accelerations
motion sickness index
additional resistance in waves
ship hull form
ship design parameters
artificial neural networks
fuzzy logic
Opis:: This paper presents a method which makes it possible to determine optimum hull form of passenger car ferry with regard to selected sea-keeping qualities and additional resistance in waves. In the first phase of investigations a hull form characterized by the highest qualities was selected from the list of similar ships. Next, its optimum dimension ratios were determined. Design criteria were formulated by using a method based on deterministic scenarios, but objective functions of partial targets were determined in the form of artificial neural networks. To select the best design variants elements of fuzzy logic were used, that made it possible a.o. to show merits of the design by means of linguistic variables. Such approach made it possible to find the best hull form and its dimensions from the point of view of all considered criteria simultaneously.
Źródło:: Polish Maritime Research; 2008, 2; 3-11
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Initial considerations for operational parameters intended to minimize fuel consumption by ships in real weather conditions
Autorzy:: Cepowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/135261.pdf
Data publikacji:: 2015
Wydawca:: Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:: ship
vessel
operating
fuel
fuel consumption
speed
velocity
weather
modeling
rpm
engine
hull
propeller
thrust
resistance
added resistance
Opis:: The paper presents the concept of modeling a ship’s operating parameters in order to minimize the fuel consumption in real weather conditions. This is an important innovation because, in ship theory, fuel consumption and speed are usually expressed by average values over longer periods of time, which is a significant limitation. This article presents selected topics of the proposed research such as state-of-the-art, general objectives, scientific and technical expectations, scientific and economic extensions, and environmental impacts. The article also proposes an original method of the research.
Źródło:: Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2015, 43 (115); 9-14
1733-8670
2392-0378
Pojawia się w:: Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Estimation of hull’s resistance at preliminary phase of designing
Autorzy:: Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/246841.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: seagoing ship
hull coefficient
hull dimensions parameters
hull resistance
propulsion power
statek morski
współczynnik kadłuba
wymiary kadłuba
parametry
odporność kadłuba
siła napędowa
Opis:: In this paper are presented the methodology of calculation of hull resistance components, principal parameters of a vessel, necessary for calculation of displacement in relation to vessel’s type. That methodology concerns analysis of designing ways at early stage of ship’s power calculation. Ship owners' preliminary assumptions for new ship consist of deadweight (for container vessel load capacity TEU), speed shipping line and others. Taking it as a base, in early stage of design one has to select propulsion type. This goal needs definition of principal dimensions of a vessel, which are the base for further calculations of hull’s resistance and evaluation of necessary power of main engine (engines) to fulfil shipping requirements. In the paper, are presented major constraints for designing of new vessels coming from ship-owner assumptions such as seafaring limitations and safety of shipping regulations due to Classification Societies Rules or coming out from designing experience. In the paper are presented components of ship’s resistance and methods of total resistance calculations what is a basis for power calculation and propulsion designing. Moreover, are presented results of calculations of resistance components of different types of ships, and variety of displacement and sailing velocity. It has to be assumed, that presented method concerns preliminary design stage and can vary from different ships classes and constructions of hulls.
Źródło:: Journal of KONES; 2017, 24, 1; 77-82
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Estimation of the vessels sailing resistance in the preliminary analyses
Autorzy:: Charchalis, Adam
Powiązania:: https://bibliotekanauki.pl/articles/247078.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: merchant vessel
hull dimensions parameters
hull coefficient
hull resistance
hull power of the vessel
Opis:: In this article is presented the methodology of calculation of principal parameters of hull a vessel and resistance components. The approximate method is based on the analysis of the results of model tests and surrender tests presented in the literature. Ship owners' preliminary assumptions for new ship consist of deadweight, speed-shipping line and others. This goal needs definition of principal dimensions of a vessel, which are the basis for further calculations of hull’s resistance and evaluation of necessary power of main engine to fulfil shipping requirements. The route and its environment, type of cargo, quantity to be moved, and value of the cargo and port facilities are typical features, which will be considered when evolving the size, speed, and specification of a suitable ship. Specific service requirements will be similarly considered when evolving vessels such as warships, passenger ships or fishing vessels. Selection of main dimensions of vessel is limited by related to seaways or harbours characteristic and limitations rules regarding buoyancy, stability, hull strength, manoeuvring capability, etc. The influence of the main dimensions of the ship and their coefficients of maritime and strength properties of the ship were presented. Moreover, formulas for calculation of the ship's resistance components, such as friction resistance, and wave shape, as well as the results of calculations for different types of ships, for the assumed deadweight and speed of sailing, are presented.
Źródło:: Journal of KONES; 2019, 26, 1; 17-22
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Experimental investigation of deflectors angle influence on energy absorption
Autorzy:: Gieleta, R.
Barnat, W.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/241835.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: IED
improvised explosive device
hull resistance
deflector
Opis:: Numerical simulations without preliminary validation and model verification are vulnerable to errors. Best results are obtained when full experimental research is provided. Such tests are expensive and may be dangerous. Due to cost control and personnel safety, studies are often done in scale. Scale can affect both construction dimensions and applied load. In this paper four different vehicle's bottoms are examined: flat bottom and 3 types of deflectors. The paper presents four different vehicle's bottom shapes in order to examine deflector angle influence on energy absorption. The test included 4 cases: flat bottom broken-shaped deflector and deflectors with different apex angles 124 centigrade and 144 centigrade. For all cases the distance between explosive and panel was approximately 400 mm. The charge used was 100 g TNT. Flat bottom and deflectors were made of St3 steel with 2 mm thickness. For the purpose of the research a special test stand to examine effects of detonation wave was used. The force measurement system was designed in Department of Mechanics and Applied Computer Science. As a result, force versus time plots were obtained. The use of any deflector decreases maximum force affecting vehicle's hull.
Źródło:: Journal of KONES; 2012, 19, 4; 201-205
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Kadłuby laminatowe dla okrętów zwalczania min : problemy technologiczne
Polymer composites in minehunters hull construction : technological problems
Autorzy:: Grządziela, A.
Powiązania:: https://bibliotekanauki.pl/articles/278066.pdf
Data publikacji:: 2014
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:: kadłub okrętu
niszczyciel min
wybuch podwodny
laminat GRP
GRP
odporność udarowa
odkształcenie sprężyste
ship hull
minehunter
underwater explosion
GRP laminate
impact resistance
elastic deformation
Opis:: Artykuł przedstawia problem obliczeń konstrukcji kadłubów niszczycieli min wykonanych z laminatów GRP. Scharakteryzowano zadania niszczycieli min oraz przedstawiono problem odporności udarowej na falę detonacji podwodnej. Wskazano metody obliczeń parametrów fali wywołującej odkształcenia sprężyste kadłuba okrętowego oraz oddziaływanie dynamiczne na struktury wewnętrzne. Przedstawiono współcześnie stosowane metody realizacji konstrukcji kadłubów GRP oraz łączenia z elementami stalowymi.
The paper presents the problem of calculating the hull structures of minehunters made from GRP laminates. It characterizes the task of minehunters and presents the problem of impact resistance to the waves of underwater detonations. This method of calculating the parameters of the indicated wave causing elastic deformation of the hull of the ship and dynamic effects on the internal structures. The paper presents the implementation of modern methods of constructing GRP hulls and connecting laminate with steel part.
Źródło:: Przetwórstwo Tworzyw; 2014, [R.] 20, nr 1 (157), 1 (157); 21-27
1429-0472
Pojawia się w:: Przetwórstwo Tworzyw
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Methods of determination of frictional resistance for prediction of total resistance of inland waterway vessels
Autorzy:: Kulczyk, J.
Powiązania:: https://bibliotekanauki.pl/articles/259790.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: inland waterway vessel
extrapolation of hull resistance
coefficient of frictional resistance
Opis:: In the present paper presented are the results of prediction of total resistance of inland waterway vessels based on model test data. In scaling the resistance from model to full scale the extrapolation with two-dimensional frictional resistance formulation (without form factor) was applied, combined with different methods of determination of frictional (viscous) resistance coefficient. There were used the equations that include the effect of water depth, with and without account for pressure gradient. It was shown that limited depth of water substantially affects the frictional resistance. The results of example calculations are compared to resistance prediction made using the ITTC 1957 modelship correlation line. Example calculations take into account the limited depth of water. Depending on the applied method of determination of frictional resistance coefficient the resultant total resistance of inland waterway vessel is higher or lower than the resistance based on the ITTC 1957 correlation line. The effect of water depth depends on the ratio of water depth to ship draught (h/T), on ship speed, and on the composition of a convoy. The extrapolation of resistance was made without including the form factor. Computations are made based on model test data for an inland waterway cargo vessel, for a kombi-type convoy of an inland waterway cargo vessel and a dumb barge, and for a convoy of two dumb barges without a pushboat.
Źródło:: Polish Maritime Research; 2018, S 1; 68-73
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Numerical investigation of length to beam ratio effects on ship resistance using ranse method
Autorzy:: Le, Tat Hien
Nguyen, Duy Anh
Tran, Ngoc Tu
Hoa, Nguyen Thi Ngọc
Ngoc, Vu Minh
Powiązania:: https://bibliotekanauki.pl/articles/32917972.pdf
Data publikacji:: 2023
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: length-beam ratio
L/B
resistance
hull form
RANSE
Opis:: The paper discusses the length to beam (L/B) ratio effects on ship resistance at three different Froude numbers using unsteady RANSE simulation. First, the JBC ship model was used as an initial hull form for verification and validation of predicted ship resistance results with measured data, and then the influence of the L/B ratio on ship resistance was carried out. Ship hull forms with different L/B ratios were produced from the initial one by using the Lackenby method. The numerical results obtained show the L/B ratio’s effect on ship resistance. Increases of the L/B ratio led to gradual reduction of the total ship resistance and vice versa. Analysis of the changing of the resistance components indicates that the pressure resistance changes are considerably larger than the frictional one. Finally, the paper analyses the difference in the flow field around the hull of the ship with variation of the L/B ratio to fully understand the physical phenomenon in the change of ship resistance at different L/B parameters.
Źródło:: Polish Maritime Research; 2023, 1; 13-24
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Test research on the resistance performance of high-speed trimaran planing hull
Autorzy:: Ma, W.
Sun, H.
Zou, J.
Yang, H.
Powiązania:: https://bibliotekanauki.pl/articles/259708.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran planing hull
side hulls
high speed
step
resistance
model test
Opis:: In order to identify high-speed navigation ability of trimaran planing hull, as well as investigate the characteristics of its resistance and hull form, ship model tests were conducted to measure resistance, trim and heaving under different displacements and gravity centre locations. The test results were then used to study the influence of spray strips on resistance and sea-keeping qualities. Moreover, different planning surfaces were compared in the model tests which helped to look into influence of steps on hull resistance and its moving position. Also, the resistance features of monohull and trimaran planing hulls, both with and without steps, were compared to each other. From the tests it can be concluded that: the two auxiliary side hulls increase aerodynamic lift at high-speed motion, which improves the hydrodynamic performance; the trimaran planing hull has also excellent longitudinal stability and low wave-making action; when Fr∇> 8, its motion is still stable and two distinct resistance peaks and two changes of sailing state (the second change is smaller) appear; spray strips are favourable for sea-keeping qualities at high speed. The change trends before the second resistance peak as to the resistance and sailing behaviour of trimaran planing hull without steps are the same as for monohull planing hull without steps. but when steps in both hulls exist the change trends are different; more specifically: trimaran planing hull with steps has only one resistance peak and its resistance increases along with its speed increasing, and the resistance is improved at the increasing speed as the number of steps increases.
Źródło:: Polish Maritime Research; 2013, 4; 45-51
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Test studies of the resistance and seakeeping performance of a trimaran planing hull
Autorzy:: Ma, W.
Sun, H.
Zou, J.
Zhuang, J.
Powiązania:: https://bibliotekanauki.pl/articles/259495.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran planing hull
appendix
resistance
seakeeping
model test
Opis:: Towing tank tests in calm water were performed on a trimaran planing hull to verify its navigational properties with different displacements and centres of gravity, as well as to assess the effects of air jets and bilge keels on the hull’s planing capabilities, and to increase the longitudinal stability of the hull. Hydrostatic roll tests, zero speed tests, and sea trials in the presence of regular waves were conducted to investigate the hull’s seakeeping ability. The test results indicate that the influence of the location of the centre of gravity on the hull resistance is similar to that of a normal trimaran planing hull; namely, moving the centre of gravity backward will reduce the resistance but lower the stability. Bilge keels improve the longitudinal stability but slightly affect the resistance, and the presence of air jets in the hull’s channels decreases the trim angle and increases heaving but has little effect on the resistance. Frequent small-angle rolling occurs in waves. The heaving and pitching motions peak at the encounter frequency of , and the peaks increase with velocity and move towards greater encounter frequencies. When the encounter frequency exceeds, the hull motion decreases, which leads to changes in the navigation speed and frequency.
Źródło:: Polish Maritime Research; 2015, 1; 22-27
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "hull resistance" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język