Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "friction coefficient" wg kryterium: Temat


Tytuł:
Wear tests of sliding surfaces in the environment of mixtures of lubricating oils and refrigerants
Autorzy:
Górny, K.
Tyczewski, P.
Zwierzycki, W.
Powiązania:
https://bibliotekanauki.pl/articles/101978.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
refrigerant
refrigerating oil
friction coefficient
Opis:
Elements of refrigeration compressors may be exposed to various types of wear pro¬cesses, depending on the used oils and refrigerants. The presence of the refrigerant makes the lubricating properties and anti-oil mixture - factor much worse than in case of the lack of refrigerant oil. Current regulations on the use of ODS phase-out of working require refrigeration synthetic refrigerants HCFC (e.g. popular R22). The paper presents the effect of different mixtures of oils and refrigerants on friction coefficient and surface condition of cast iron and aluminium PA6. Tests were performed on a prototype machine using frictional node type block-on-ring, which is located inside a pressure chamber that simulates the refrigeration compressor. The results of the study confirm the possibility of using green refrigerant R290 (propane) as a substitute for R22, while keeping the existing mineral oil.
Źródło:
Advances in Science and Technology. Research Journal; 2014, 8, 21; 49-53
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supersmarność oraz nowe materiały supersmarne wytwarzane napylaniem proszkowym
Superlubricity and new superlubricant materials made by powder spraying
Autorzy:
Leshchynsky, V.
Wiśniewska-Weinert, H.
Powiązania:
https://bibliotekanauki.pl/articles/211744.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
solid lubricant
nanoparticles
friction coefficient
Opis:
O supersmarności zazwyczaj mówimy wówczas, kiedy dwie stykające się powierzchnie wykazują brak oporu podczas tarcia ślizgowego. Artykuł opisuje zjawisko ultra-niskiego tarcia dzięki zastosowaniu powłok z nanocząstek MoS2, wynikiem którego jest otrzymanie ultra-niskiego współczynnika tarcia. Autorzy wskazują, że zastosowanie wielokomponentowych supersmarnych powłok otrzymanych metodą napylania proszkowych materiałów zawierających dodatki smaru stałego MoS2 znacznie zmniejsza współczynnik tarcia w warunkach suchego tarcia ślizgowego.Przedstawiono charakterystykę tribologiczną powłok zawierających MoS2, przeprowadzono testy tarciowo-zużyciowe w podwyższonej temperaturze. Określono wartość współczynnika tarcia w czasie.
Superlubricity is the state in which two contacting surfaces exhibit no resistance to sliding. The work describes a ultra-low friction phenomenon due to application of MoS2 nanoparticle coatings results in ultra-low friction coefficients in ambient atmosphere.It is shown the concept of superlubricity of combined coatings can be effectively used to improve the friction under dry sliding conditions. The additional application of solid lubricant films by powder spraying and MoS2 precipitation technologies results in low friction coefficients and a good tribological behaviour under dry sliding conditions. To clarify the tribological characteristics of MoS2 films, friction experiments were conducted at stick-slip regime at the high temperature. It was found that the friction coefficient value was very low and stable for prolonged periods.
Źródło:
Obróbka Plastyczna Metali; 2006, 17, 4; 43-48
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of surface layer parameters on wear intensity of friction pairs
Analiza wpływu parametrów warstwy wierzchniej na intensywność zużycia par ciernych
Autorzy:
Burdzik, R.
Folęga, P.
Łazarz, B.
Stanik, Z.
Warczek, J.
Powiązania:
https://bibliotekanauki.pl/articles/355798.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
surface layer
wear
friction coefficient
Opis:
The study discussed in the paper consisted in testing the impact of surface layer parameters on wear intensity of friction pair components. The study was conducted having taken additional operational factors into consideration, namely the friction conditions (presence of lubricant) and the value of loads affecting the contact zone of the samples being tested. The study constituted laboratory tests of wear and were conducted by means of a T-01M type laboratory test stand used to experimentally analyse frictional cooperation of various materials used in structural components of motor vehicles. The friction pairs examined were previously operating in a pin-on-disk system under various conditions. The materials of the friction pairs tested at the stand were subjected to heat treatment and chemical processing in order to attain specific parameters of their surface layers. The studies conducted enabled determination of the abrasive wear values for the material samples tested having entailed the surface layer parameters and the factors related to operation of actual structural components used in automotive engineering. An additional advantage of the studies conducted was the possibility to establish actual coefficients of friction occurring in specific friction pairs. Establishing the actual values of friction coefficients for the materials of friction pairs under specific conditions and having taken the impact of the surface layer parameters into consideration enabled identification of the reasons for excessive surface wear. Hence a reference can be made between the stationary tests undertaken and actual components cooperating with one another in kinematic pairs of machines. The utilitarian premise resulting from the studies conducted is the necessity of paying particular attention to surface layer parameters while designing friction pairs for machines.
W pracy badano wpływ parametrów warstwy wierzchniej na intensywnosc zuzycia elementów pary ciernej. Badania przeprowadzono przy uwzględnieniu dodatkowych czynników eksploatacyjnych takich jak warunki tarcia (obecność środka smarnego) oraz wartosc obciążen w strefie kontaktowej badanych próbek. W ramach pracy przeprowadzono badania laboratoryjne zużycia przy wykorzystaniu stanowiska badawczego typu T-01M, na którym eksperymentalnie analizowano współpracę cierna różnych materiałów stosowanych na elementy konstrukcyjne pojazdów samochodowych. Badano pary cierne, które pracowały w układzie trzpień – tarcza w różnych warunkach. Materiały badanych na stanowisku par ciernych poddawano zabiegom cieplno-chemicznym w celu uzyskania określonych parametrów warstwy wierzchniej. Przeprowadzone badania umozliwiły wyznaczenie wielkości zuzycia sciernego badanych próbek materiałów przy uwzglednieniu parametrów warstwy wierzchniej oraz czynników związanych z eksploatacja rzeczywistych elementów konstrukcyjnych wykorzystywanych w technice motoryzacyjnej. Dodatkowym atutem przeprowadzonych badań było wyznaczenie rzeczywistych współczynników tarcia występującego w przypadku określonych par ciernych. Wyznaczanie rzeczywistych wartości współczynników tarcia materiałów par ciernych przy określonych warunkach oraz przy uwzględnieniu wpływu parametrów warstwy wierzchniej pozwala na identyfikacje przyczyn nadmiernego zużycia powierzchni. Przeprowadzone badania stanowiskowe można odnieść do rzeczywistych elementów współpracujących ze sobą w węzłach kinematycznych maszyn. Utylitarna przesłanka wynikająca z przeprowadzonych badań jest koniecznosc zwrócenia szczególnej uwagi, przy projektowaniu w częściach maszyn wezłów tarcia, na parametry warstwy wierzchniej.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 4; 987-993
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the Friction Coefficient in the Foil-Roller Combination
Wyznaczanie współczynnika tarcia w skojarzeniu folia–rolka
Autorzy:
Komar, W.
Dudda, W.
Powiązania:
https://bibliotekanauki.pl/articles/971545.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
friction coefficient
foil bearing
friction
top foil
Opis:
In order to verify and select the appropriate materials for cooperation in high-speed foil bearings in the particular tribological pair, a series of friction and wear tests of selected material pairs were carried out. This paper presents a method for determination of the friction coefficient, a basic quantity characterizing two materials cooperating frictionally in an atypical tribological combination of the foil-roller type. Laboratory tests, necessary to determine the friction factor value in the mentioned friction junction and in a low-boiling liquid environment, were carried out on a specially prepared test stand using the T-27 apparatus.
W celu weryfikacji i doboru odpowiednich materiałów do współpracy w szybkoobrotowych łożyskach foliowych w określonym węźle tribologicznym przeprowadzono szereg badań tarcia i zużycia wybranych par materiałowych. W niniejszej pracy przedstawiono sposób wyznaczania współczynnika tarcia, podstawowej wielkości charakteryzującej dwa materiały współpracujące ciernie w nietypowym skojarzeniu tribologicznym typu folia–rolka. Badania laboratoryjne, niezbędne do wyznaczenia wartości współczynnika tarcia we wspomnianym węźle tarcia w środowisku cieczy niskowrzącej, przeprowadzono na specjalnie do tego celu przygotowanym stanowisku badawczym z zastosowaniem aparatu T-27.
Źródło:
Tribologia; 2018, 282, 6; 89-95
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on tribological properties of dental composite materials
Autorzy:
Dziedzic, K.
Zubrzycka-Wróbel, J.
Józwik, J.
Barszcz, M.
Siwak, P.
Chałas, R.
Powiązania:
https://bibliotekanauki.pl/articles/103005.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dental materials
biotribology
friction coefficient
wear
Opis:
Dental practice today used a lot of different materials. This paper evaluates tribological and mechanical properties of two dental materials CeramX and I-Light. Tribological analysisad of samples was conducted at temperature 37°C and in the environment of artificial saliva. The wear rate was evaluated with a ball-on-disc tribotester, in accordance to ASTM G-133 norm. The counterbodies were 6-mm-in-diameter Al2 O3 steel balls. The load of 2, 10 and 20 N was applied. The tests were conducted at 0.15 m/s sliding velocity over a sliding stroke of 1000 m. The changes in the value of the following parameters were measured during the trials: friction coefficient, friction force, temperature and wear depth. After completing the tribological tests the surface of samples was carried out.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 32; 144-149
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Friction Coefficient and Adhesion Properties of Silicon Carbon Nitride Films Prepared by HWCVD
Autorzy:
Yamada, T.
Iseda, T.
Kadotani, Y.
Izumi, A.
Powiązania:
https://bibliotekanauki.pl/articles/1033523.pdf
Data publikacji:
2017-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
SiCN
HWCVD
friction-coefficient
adhesion strength
Opis:
We have investigated the friction-coefficient properties of silicon carbon nitride (SiCN) films deposited on stainless steel substrates and the adhesion properties of SiCN films deposited on Si(100). The SiCN films were deposited by hot-wire chemical vapor deposition using hexamethyldisilazane and ammonium. It was found that SiCN coating was able to effectively reduce the frictional coefficient of the stainless steel substrates. The adhesion strength was measured by surface-interface physical property analysis equipment (SAICAS) and was found to be 45 N/m for the as-deposited SiCN film on Si(100). Furthermore, a maximum adhesive strength of 92 N/m was obtained after treating the film for 10 min at 1000°C.
Źródło:
Acta Physica Polonica A; 2017, 131, 3; 463-466
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The optimal tribotechnical factors in the design of machines – environmental element in the production systems
Autorzy:
Turis, J.
Beňo, P.
Biały, W.
Powiązania:
https://bibliotekanauki.pl/articles/409913.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
friction coefficient
self-lubricating bearing
tribology
Opis:
The article deals with the experimental detection of the tribotechnical parameters for two different types of sliding bearings which are intended for operation without an additional lubrication due to the increasing requirements in ecology and environment. The dominant tribotechnical parameters of the self-lubricating bearing are the coefficient of friction and temperature. To determine these parameters, an experimental method was applied in this paper. The introductory part deals with materials of self-lubricating sliding bearings, their properties and usage. The experimental part consists of the evaluation of friction characteristics and geometric change of a surface after sliding pairs were being worn. Experimental examined sliding pairs comprise a sliding bearing and the shaft. The aim of this research was to determine the effect of radial force on tribotechnical parameters in order to predict the behavior of examined sliding bearings in real operating conditions.
Źródło:
Management Systems in Production Engineering; 2018, 4 (26); 207-211
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vlijanie grupp tribologicheskikh parametrov na koehfficienty trenija semjan po frikcionnykh poverkhnostjakh separatorov
Influence group tribological parameters on the friction coefficient of the friction surfaces seeds separators
Autorzy:
Kovalyshyn, S.
Kovalchyk, Y.
Dadak, V.
Powiązania:
https://bibliotekanauki.pl/articles/77749.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
seed
separation
friction coefficient
friction surface
contact area
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 4
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation study of the process of friction in the working elements of a car braking system at different degrees of wear
Autorzy:
Borawski, A.
Powiązania:
https://bibliotekanauki.pl/articles/386592.pdf
Data publikacji:
2018
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
brake pads
friction heating
brake simulation
friction coefficient
Opis:
Among the many elements of a modern vehicle, the braking system is definitely among the most important ones. Health, and, frequently, life, may rest upon the design and reliability of brakes. The most common friction pair used in passenger cars today is a disc which rotates with the road wheel and a cooperating pair of brake pads. The composite material of the pad results in changing tribological properties as the pad wears, which was demonstrated in experimental studies. The change is also facilitated by the harsh operating conditions of brakes (high and rapid temperature changes, water, etc.). This paper looks into how changing tribology reflects on the heating process of disc and pads during braking. And so a simulation study was conducted, as this method makes it possible to measure temperature in any given point and at any time, which is either impossible or extremely difficult in real life conditions. Finite element method analyses were performed for emergency braking events at various initial speeds of the vehicle reflecting the current road speed limits.
Źródło:
Acta Mechanica et Automatica; 2018, 12, 3; 221-226
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of dynamic friction coefficient of paddy grains on different surfaces
Autorzy:
Askari Asli-Ardeh, E.
Abbaspour-Gilandeh, Y.
Shojaei, S.
Powiązania:
https://bibliotekanauki.pl/articles/25605.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
friction coefficient
physical property
contact surface
dynamic friction coefficient
paddy grain
moisture content
disc peripheral speed
Źródło:
International Agrophysics; 2010, 24, 2; 101-105
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction lining coefficient of the drive friction pulley
Autorzy:
Krešák, Jozef
Peterka, Pavel
Ambriško, Ľubomír
Mantič, Martin
Powiązania:
https://bibliotekanauki.pl/articles/1841748.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
hoisting rope
friction pulley
friction lining
sliding friction coefficient
Opis:
Mine hoisting KOEPPE system or friction hoist winch work with traction pulley, the pulley rim grooves are lined. Lining has to provide a higher friction coefficient between the rope and the traction pulley. The constructors of mine hoisting machines require from the manufacturers a guaranteed appropriate and stabile value of a friction coefficient at different pressures between a rope and a friction lining under different external conditions (drought, moisture, icing, etc.). The paper presents processed measurements performed on the six samples of the friction lining (G1-G6) made of rubber and the sample of the standard used friction lining (K25). The samples (G1-G6) differ in the chemical composition of the rubber. Due to the confidentiality of the material composition of the friction linings the hardness of the lining material as a discriminator was chosen. The measured values of the friction coefficient of the rubber friction lining samples were compared with the values of the friction coefficient of the friction lining (K25) usually mounted on friction lining pulley.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 2; 338-345
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie własności ciernych klocków hamulcowych różnych producentów
Comparison of frictional properties of brake blocks from different manufacturers
Autorzy:
Trąbka, A.
Janusz, J.
Kłosiński, J.
Sidzina, M.
Powiązania:
https://bibliotekanauki.pl/articles/155806.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
tarcie
współczynnik tarcia
pomiary
friction
friction coefficient
measurements
Opis:
W pracy przedstawiono metodę oraz wyniki badań współczynnika tarcia dla okładzin ciernych wytwarzanych przez różnych producentów. Badania przeprowadzono na odpowiednio zmodyfikowanym stanowisku aktywnego obciążania silnika. Do pomiarów wykorzystano przemiennik częstotliwości, sterownik PLC oraz system pomiarowy Spider 8. Otrzymane wyniki przedstawiono na wykresach.. Stwierdzono, że tylko okładziny cierne jednego producenta spełniają wymaganie zapewnienia relatywnie stałego współczynnika tarcia niezależnie od prędkości poślizgu.
A method and laboratory test results of the friction coefficient in a couple: brake block - brake disk are presented in the paper. A modified stand for active loading an asynchronous motor was used for tests of the brake linings from different manufacturers (Fig. 1, 2a, 2b). A frequency converter, PLC programmer and Spider 8 measurement system were used. On the basis of the stored courses there were calculated the pressure forces of the brake blocks to the brake disk, the friction forces and the brake disk rotational speeds and the average friction coefficients. Figs. 3-10 show the friction coefficients as a function of the friction path and rubbing speed. It was found that the average friction coefficients are in the range 0.25-0.35 in case of manufacturers 1, 2 and 3 and in the range 0.3-0.4 for the fourth of them. Only the brake linings of the first manufacturer meet the requirement of assuring the constant friction coefficient apart from the rubbing speed.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 12, 12; 1598-1600
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tribological Examination of Different Steel Materials after Special Heat Treatment and Salt Bath Nitriding
Autorzy:
Opaliński, M.
Mazuro, P.
Klasik, A.
Rostek, E.
Powiązania:
https://bibliotekanauki.pl/articles/351726.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tribology
mechanical properties
steel alloys
friction coefficient
Opis:
The main aim of the presented research was examination of new tribological pairs made of different types of steel. Materials of disc probes were submitted to unusual heat treatment processes and salt bath nitriding. The research is focused on the friction coefficients and mass losses of the material probes. Based on the results it was noticed that the best wear resistant pair was bearing steel 100Cr6 coupled with high speed steel S705. The lowest friction coefficient appeared for the pair bearing steel 100Cr6 and maraging steel C350.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 1881-1888
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction coefficient determination based on the results of ball – on - flat test
Autorzy:
Szymczyk, E.
Jachimowicz, J.
Prasek, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/248003.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
friction coefficient
ball-on-flat test
FFT
Opis:
The interaction of contacting surfaces in relative motion is basic for every engineering design. The transmission of load from one rubbing surface to its mating surface under conditions of dry contact is taken into account. Microlocal or global models of friction are used to describe this phenomenon. In global approach, frictional force is proportional to normal load. A coefficient of external friction depends on the type, shape, and precision of finishing the surfaces of mating elements. The aim of the paper is analysis of a friction coefficient for 2024T3 aluminium alloy during cyclic tangential loading. Experimental tests are carried out on a ball-on-flat wear-testing machine Ducom. Tests of reciprocating friction are carried out using the following friction pairs of specimens: the ball specimen is made of high strength aluminium alloy PA25 and the plane specimen is made of 2024T3 alloy. Finally, graphs of temporary friction coefficients versus time in the form of fluctuated periodical functions are obtained. Two phases of friction are detected. However, during the first stage, the friction coefficient is relatively small while in the second period it rapidly increases and tends to become more irregular. Static and dynamic friction coefficients are estimated. In order to determine the dynamic coefficient the Discrete Fourier Transformation is used. The calculation of the dominant amplitude (corresponding to test frequency) of the studied functions is possible due to this method. An increase of the friction coefficient with an increase of normal load is observed. A cladding layer also causes an increase of friction, especially in the second phase.
Źródło:
Journal of KONES; 2012, 19, 1; 415-422
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of friction coefficient in friction welding process of tubular steel elements
Badanie współczynnika tarcia w procesie zgrzewania tarciowego stalowych elementów rurowych
Autorzy:
Ambroziak, A.
Winnicki, M.
Laska, P.
Lachowicz, M.
Zwierzchowski, M.
Leśniewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/352645.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
zgrzewanie tarciowe
współczynnik tarcia
friction welding
friction coefficient
torque
Opis:
The paper presents a research on the relationship between friction coefficient and friction pressure (6 MPa, 12 MPa, 16.5 MPa), rotational speed (1000 rpm, 1400 rpm, 2000 rpm) and surface temperature during traditional friction welding. Values of friction pressure force and friction torque were read on an oscilloscope connected to a piezoelectric sensor and temperature was measured with a thermovision camera on circumference of the welding surface and in the heat-affected zone. Friction was measured between two tubular elements OD 18 mm x WT 2 mm. It was found that the friction coefficient is dependent mostly on pressure force and temperature. Its value ranges from 0.12 to 0.83, with the top value at 16.5 MPa and 1400 rpm.
Badano zalezność współczynnika tarcia od wielkości docisku (6, 12 i 16,5 MPa), prędkości obrotowej (1000, 1400 i 2000 min-1) oraz temperatury na powierzchni elementów podczas konwencjonalnego zgrzewania tarciowego. Wartości siły docisku oraz momentu tarcia odczytano z oscyloskopu podłączonego do czujnika piezoelektrycznego, natomiast pomiaru temperatury dokonano kamerą termowizyjną na obwodzie powierzchni zgrzewania oraz w strefie wpływu ciepła. Badano tarcie dwóch elementów rurowych o średnicy 18 mm i grubości ścianek 2 mm. Stwierdzono, że wartość współczynnika tarcia, wykazuje najwiekszą zalezność od wielkości docisku i temperatury. Współczynnik tarcia wyniósł od 0,12 do 0,83, przy czym największa wartość wykazano dla docisku 16,5 MPa i 1400 min-1.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 4; 975-975
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies