Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "error surface" wg kryterium: Temat


Wyświetlanie 1-12 z 12
Tytuł:
The Assessment of the Influence of Average Errors of Parcels’ Surface Areas on the Final Result of Land Properties’ Valuation Process
Ocena wpływu błędów średnich pól powierzchni działek na ostateczny wynik wyceny nieruchomości gruntowych
Autorzy:
Benduch, P.
Powiązania:
https://bibliotekanauki.pl/articles/386126.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
działka ewidencyjna
pole powierzchni nieruchomości
wycena nieruchomości
błąd średni wartości rynkowej nieruchomości
cadastral parcel
real estate surface area
real estate valuation
average error of a real estate value
Opis:
Wynikiem szacowania wartości rynkowej nieruchomości najczęściej jest wartość jednostkowa, która ostatecznie zostaje przemnożona przez pole powierzchni przedmiotowej nieruchomości. Można się zatem spodziewać, że błędy średnie pól powierzchni działek będą wpływały na finalny rezultat wyceny nieruchomości gruntowych. Na podstawie pozyskanych z ośrodków dokumentacji geodezyjnej i kartograficznej danych, uzupełnionych o wygenerowane przykłady obiektów spełniających narzucone w procesie badawczym kryteria, przeprowadzono analizę wielkości i zakresu wpływu błędów średnich pól powierzchni działek na ostateczny wynik wyceny nieruchomości gruntowych. Wykazano, że wpływ ten jest tym większy, im większa jest wartość jednostkowa przypisanych praw do nieruchomości. Zależnie od rozpatrywanego przypadku badane oddziaływanie może mieć nawet bardziej istotne znaczenie aniżeli dokładność szacowania wartości jednostkowej. Oznacza to, że bezkrytyczne korzystanie z pól powierzchni ujawnionych w ewidencji gruntów i budynków do wyznaczania wartości rynkowej nieruchomości nie jest poprawnym rozwiązaniem. Takie postępowanie może prowadzić do istotnego obniżenia dokładności oraz wiarygodności całego procesu wyceny. W związku z tym warto, aby wpływ błędów średnich pól powierzchni na wartość rynkową nieruchomości był weryfikowany i uwzględniany, co niewątpliwie przyniesie pozytywne skutki.
The result of the appraisal of a market value is most often a unit value, which is finally multiplied by the surface area of a real estate. It could be estimated that average errors in parcels’ surface areas would influence the final result of land property valuation. On the basis of the data obtained from geodesic and cartographic documentation centres, complemented by generated examples of the objects fulfilling the imposed criteria of the research process, the analysis of the scale and scope of average errors of parcel’ s surface area and their influence on the final result of valuation was conducted. It was presented that, with the greater unit value of a real estate, the influence is more significant. Depending on the case in question, the researched impact may be even more important than an accurate estimation of a unit value. It means that uncritical usage of the surface areas revealed in the register of land and buildings to estimate a market value of real properties is not a good solution. Such a practise may lead to a significant reduction of accuracy and credibility of the whole valuation process. It would be a good option if the influence of average errors of parcel’s surface area on real properties’ market value was verified and considered, which would undoubtedly bring positive results.
Źródło:
Geomatics and Environmental Engineering; 2016, 10, 4; 27-38
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved machining performance through turn-milling
Autorzy:
Berenji, Kaveh Rahimzadeh
Budak, Erhan
Powiązania:
https://bibliotekanauki.pl/articles/2086273.pdf
Data publikacji:
2022
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
turn milling
tool life
surface error
chip geometry
Opis:
As a multi-axis metal cutting operation, turn-milling has the combined characteristics of conventional turning and milling operations involving rotating workpiece and milling tool with linear feed motion in the workpiece axis direction. Although turn-milling offers many advantages in machining complex and hard-to-cut materials due to its flexible kinematics, the process presents specific challenges. The main objective of this paper is to present an overview of turn-milling operations from different perspectives. In this regard, first, the advantages of turn-milling in terms of tool life are presented. An analytical approach is given based on process kinematics to achieve better surface quality and productivity simultaneously. Additionally, the uncut chip geometry and the cutting force models are presented with experimental verification.
Źródło:
Journal of Machine Engineering; 2022, 22, 2; 5--17
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Addressing theaccidental risks of maritime transportation: could autonomous shipping technology improve the statistics?
Autorzy:
Hoem, Å.S.
Fjørtoft, K.
Rødseth, Ø.J.
Powiązania:
https://bibliotekanauki.pl/articles/116850.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Maritime Autonomous Surface Ships (MASS)
autonomous ship
autonomous shipping technology
maritime transportation
maritime accidents
human error
maritime risk
accident statistics
Opis:
A paradigm shift is presently underway in the shipping industry promising safer, greener and more efficient ship traffic. In this article, we will look at some of the accidents from conventional shipping and see if they could have been avoided with autonomous ship technology. A hypothesis of increased safety is often brought forward, and we know from various studies that the number of maritime accidents that involves what is called “human error” ranges from some 60‐90 percent. If we replace the human with automation, can we then reduce the number of accidents? On the other hand, is there a possibility for new types of accidents to appear? What about the accidents that are today averted by the crew? This paper will present a method to assess these different aspects of the risk scenarios in light of the specific capabilities and constraints of autonomous ships.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 3; 487-494
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A survey of factors influencing MLP error surface
Autorzy:
Kordos, M.
Duch, W.
Powiązania:
https://bibliotekanauki.pl/articles/970445.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
sieć neuronowa
powierzchnia błędów
wizualizacja
trajektoria uczenia się
neural networks
MLP
error surface
visualization
learning trajectory
Opis:
Visualization of neural network error surfaces and learning trajectories helps to understand the influence of numerous factors on the neural learning process. This understanding can be used to improve training and design of MLP networks. The following topics are discussed using a few benchmark datasets for illustration: general error surface properties including local minima, plateaus and narrow funnels, their dependence on network structure, input data, transfer and error functions, consequences of weight initialization, and interesting directions in the weight space. The error surfaces are shown in 3-dimensional PCA-based projections. Finally a possibility of effective weight number reduction is discussed.
Źródło:
Control and Cybernetics; 2004, 33, 4; 611-631
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimizing sampling parameters of cmm data acquisition for machining error correction of freeform surfaces
Autorzy:
Poniatowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/386245.pdf
Data publikacji:
2018
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
freeform surface
machining error correction
coordinate measurement
measurement parameters
design of experiment technique
Opis:
An optimization study using the design of experiment technique is described, in which the surface profile height of a freeform surface, determined in coordinate measurements, is the response variable. The control factors are coordinate sampling parameters, i.e. the sampling grid size and the measuring tip diameter. As a result of the research, an optimal combination of these parameters was found for surface mapping with acceptable measurement uncertainty. The presented study is the first stage of optimization of machining error correction for the freeform surface and was intended to take into account mechanical-geometric filtration of surface irregularities caused by these geometrical parameters. The tests were carried out on a freeform workpiece milled with specific machining parameters, Ra of the surface roughness was 1.62 μm. The search for the optimal combination of parameters was conducted using Statistica software.
Źródło:
Acta Mechanica et Automatica; 2018, 12, 4; 265-269
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Model of Surface and Quasi-Spherical Sea Noise and Its Application to Analysis of DIFAR Systems
Autorzy:
Rudnicki, Mariusz
Salamon, Roman
Marszal, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2097703.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
numerical model
surface sea noise
quasi-spherical sea noise
DIFAR
bearing error
Opis:
Various types of passive sonar systems are used to detect submarines. These activities are complex and demanding. Therefore, computer simulations are most often used at the design stage of these systems. For this reason, it is also necessary to simulate the acoustic ambient noise of the sea. The article proposes a new numerical model of surface and quasi-spherical sea noise and presents its statistical parameters. The results of the application of the developed noise model to analyse the received signals of the DIFAR1 sonobuoy are also presented.
Źródło:
Archives of Acoustics; 2021, 46, 4; 591-604
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error mitigation algorithm based on bidirectional fitting method for collision avoidance of Unmanned Surface Vehicle
Autorzy:
Song, L.
Chen, Z.
Mao, Y.
Dong, Z.
Xiang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/260298.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Unmanned Surface Vehicle
position prediction
error mitigation
autoregressive model
particle swarm optimization (PSO)
Opis:
Radars and sensors are essential devices for an Unmanned Surface Vehicle (USV) to detect obstacles. Their precision has improved significantly in recent years with relatively accurate capability to locate obstacles. However, small detection errors in the estimation and prediction of trajectories of obstacles may cause serious problems in accuracy, thereby damaging the judgment of USV and affecting the effectiveness of collision avoidance. In this study, the effect of radar errors on the prediction accuracy of obstacle position is studied on the basis of the autoregressive prediction model. The cause of radar error is also analyzed. Subsequently, a bidirectional adaptive filtering algorithm based on polynomial fitting and particle swarm optimization is proposed to eliminate the observed errors in vertical and abscissa coordinates. Then, simulations of obstacle tracking and prediction are carried out, and the results show the validity of the algorithm. Finally, the method is used to simulate the collision avoidance of USV, and the results show the validity and reliability of the algorithm.
Źródło:
Polish Maritime Research; 2018, 4; 13-20
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimum combination of machining parameters during drilling of aluminium 7075 alloys using Grey based Taguchi approach
Autorzy:
Sreenivasulu, Reddy
Rao, Chalamalasetti Srinivasa
Powiązania:
https://bibliotekanauki.pl/articles/1819169.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
drilling
burr size
surface roughness
roundness error
thrust force
torque
Taguchi method
grey relational analysis
wiercenie
chropowatość powierzchni
błąd okrągłości
siła odporowa
moment obrotowy
metoda Taguchi
szara analiza relacyjna
Opis:
From ancient days to till today manufacturing industries, especially making of holes on the parts during drilling process for precision assembling of parts facing problems with burr formation. Drilling operation is one of the finishing operation in the production cycle, removing of burrs during drilling process is a time consuming and non-value added process to the manufacturing sector. So reducing the size of burrs is the main aim of the present study. In the present work, optimization of burr size is considered during drilling of aluminium 7075 alloy. In this connection, experiments are conducted based on Grey based Taguchi. From Grey relational grades of responses selected optimal combination of parameters to attain multiple performance characteristics of responses with a corresponding higher grey relational grade. For identifying the most significant input parameters that influence the output responses ANOVA is conducted. Based on interaction effect plots of data means of responses from results of ANOVA, confirmation tests are conducted by choosing most significant parameters. Finally, observations reveals that feed rate, point and clearance angles are the most influential factors on burr size and also experimental results divulge that the lower the thrust force causes to decrease the burr height. The proposed approach is helpful to the budding entrepreneurs in the related areas to select optimal combination of drilling parameters to attain multiple performance characteristics of responses especially in burr size to prevent the post finishing operations up to certain extent.
Źródło:
Journal of Mechanical and Energy Engineering; 2020, 4, 3; 227--238
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of Data Affected by Aberrant Errors in the Study of the Milling Process on Aluminum Alloys
Autorzy:
Țîțu, Aurel Mihail
Pop, Alina Bianca
Powiązania:
https://bibliotekanauki.pl/articles/27324482.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
cutting process
surface roughness
aberrant error
Romanovski test
Opis:
In this scientific paper it is presented the statistical analysis of the experimental data obtained by the study of the influence of the cutting parameters exerted in end-milling process on the surface roughness. The surface roughness parameter is measured in the cutting feed direction and against it. The parameters of the cutting process, the number of levels and their values were established. Based on these parameters, the research was designed on a complete factorial experiment, randomized with seven blocks. The surface roughness values were measured using a roughness tester. The research method used involved the Romanovski test. The aim of this test was to identify the data affected by aberrant errors, to remove them from the samples and then to repeat the tests for the remaining data strings until all values met the conditions imposed by the test.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 525--530
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wielkość błędu pól powierzchni jako czynnik limitujący dokładność pomiarów katastralnych
Autorzy:
Wrona, T.
Powiązania:
https://bibliotekanauki.pl/articles/130224.pdf
Data publikacji:
2001
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
pomiar katastralny
błąd powierzchni
dane ewidencyjne
cadastral measurement
surface error
registration data
Opis:
This article refer to the factors which have the main influence for the cadastral measuring accuracy. Surface designing different areas was a basic criterion of evaluation. It showed that for areas surface calculation of not beneficial configuration - measuring accuracy its borders is more higher then measuring accuracy requirements for large-scale elaborating.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2001, 11; 1-37-1-40
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Temperature Error Correction Method for a Thermometer Screen
Autorzy:
Yang, J.
Liu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/1032598.pdf
Data publikacji:
2017-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
temperature error
surface air temperature
computational fluid dynamics
screen
Opis:
Due to solar radiation exposure, air flowing inside a thermometer screen may produce a measurement error of 0.8°C or higher. To improve the air temperature observation accuracy, a temperature error correction method is proposed. The correction method is based on a computational fluid dynamics method and a genetic algorithm method. The computational fluid dynamics method is implemented to analyze and calculate the temperature errors of a screen under various environmental conditions. Then, a temperature error correction equation is obtained by fitting the computational fluid dynamics results using the genetic algorithm method. To verify the performance of the correction equation the screen and an aspirated temperature measurement platform are characterized in the same environment to conduct the intercomparison. The aspirated temperature measurement platform serves as an air temperature reference. The mean temperature error given by measurements is 0.77°C, and the mean temperature error given by correction equation is 0.79°C. This correction equation allows the temperature error to be reduced by approximately 97.5%.
Źródło:
Acta Physica Polonica A; 2017, 132, 4; 1301-1305
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A simple formula for the net long-wave radiation flux in the Southern Baltic Sea
Autorzy:
Zapadka, T.
Wozniak, S.B.
Wozniak, B.
Powiązania:
https://bibliotekanauki.pl/articles/47670.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
statistical error
infrared radiation
Batlic Region
sea surface
Baltic Sea
long-wave radiation
atmosphere
Opis:
This paper discusses problems of estimating the net long-wave radiation flux at the sea surface on the basis of easily measurable meteorological quantities (air and sea surface temperatures, near-surface water vapour pressure, cloudiness). Empirical data and existing formulae are compared. Additionally, an improved formula for the southern Baltic region is introduced, with a systematic error of less than 1 W m−2 and a statistical error of less than 20 W m−2.
Źródło:
Oceanologia; 2001, 43, 3; 265-277
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies