Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "engine fuels" wg kryterium: Temat


Tytuł:
Knock combustion in dual fuel diesel engine
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/242833.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
IC engines
alternative fuels
combustion process in engine
Opis:
This article presents the problem of the knock combustion in a dual fuel compression engine, in which additional fuel besides diesel oil was compressed natural gas (CNG). CNG was injected into the engine intake system and mixed with air supplying the engine. In this paper described the reasons of knock combustion, which occur with more intensity with the increase of methane content in engine fuel. The phenomenon of knock combustion in the dual fuel engine is difficult to eliminate, often impossible to avoid, and it forms a barrier limiting increase of methane share in the fuel. Also, this article contains the results of engine indicating and discussion on changes in the indicating diagrams caused by knock combustion. Carried out tests included engine indicating and numerical calculation of indicator diagrams with using spectral analysis and filtering cylinder pressure signals with high-pass filters. As a result of this calculation, several parameters describing intensity of knock combustion were determined. They allow to tell taking into account only cylinder pressure analysis if there is knock combustion inside engine combustion chamber or not. Knocking is an undesirable type of combustion in the engine, leading to excessive thermal and mechanical loading of the engine parts, causing premature wear of them. For this reason, this type of combustion should be eliminated from the engine operation and researchers of combustion processes must be provided with tools to detect and determine this kind of combustion.
Źródło:
Journal of KONES; 2014, 21, 4; 547-553
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ paliw estrowych na procesy utleniania oleju silnikowego w czasie eksploatacji
Influence of ester fuels on the oxidation processes of engine oil during the field tests
Autorzy:
Ziółkowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835292.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
paliwa zawierające RME
CME
olej napędowy
olej silnikowy
proces utleniania
badania eksploatacyjne
fuels containing RME
diesel fuel
engine oil
oxidation
field tests
Opis:
W artykule przedstawiono wyniki badań oleju silnikowego w czasie eksploatacji podczas zasilania paliwami estrowymi i olejem napędowym. Obiektem badań był silnik samochodu AUDI A8 2.5 TDI pracujący na dystansie około 10 000 km. W trakcie badań określono proces utleniania oleju silnikowego podczas zasilania paliwami estrowymi i porównano go z procesem utleniania tego oleju podczas zasilania olejem napędowym. Otrzymane wyniki wskazują, że paliwa estrowe mają podobny wpływ na procesy utleniania oleju silnikowego w czasie eksploatacji jak olej napędowy.
The paper presents results of field tests of engine oil fuelled with ester fuels and diesel fuel. The field tests were conducted with an AUDI A8 2.5 TDI car at a distance of 10,000 km. During the tests with ester fuels, the oxidation process of engine oil was determined. The results were compared with the oxidation process of engine oil where diesel was the fuel. The results indicate, that the ester fuels have a similar effect as the diesel fuel, they didn’t affect the oxidation process of the engine oil during the field tests.
Źródło:
Nafta-Gaz; 2017, 73, 1; 43-48
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie gazu drzewnego do napędu silników samochodowych na przykładzie samochodu Dodge Command WC 56
The use of wood gas to power car engines with the example the Dodge Command WC 56 car
Autorzy:
Zakrzewski, B.
Powiązania:
https://bibliotekanauki.pl/articles/314124.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
samochody
Dodge Command WC 56
silnik samochodowy
napęd silników
alternatywne paliwa napędowe
gaz drzewny
cars
car engine
power car engines
alternative diesel fuels
wood gas
Opis:
Artykuł miał na celu scharakteryzowanie alternatywnych źródeł napędu silników samochodowych ze szczególnym uwzględnieniem gazu generatorowego, w tym gazu drzewnego jako jego odmiany. Gaz drzewny był w połowie ubiegłego stulecia tanim i popularnym paliwem stosowanym w pojazdach. W artykule scharakteryzowano gaz drzewny jako paliwo, opisano jego zastosowanie i efektywność. W dalszej części artykułu zaprezentowano wyniki badań kwalifikacyjnych samochodu Dodge Command WC 56, napędzanego gazem drzewnym, który przeszedł badania kwalifikacyjne w latach 1953-1954 w Instytucie Transportu Samochodowego w Warszawie. Analiza publikowanych po raz pierwszy wyników badań jest interesującym przyczynkiem do historii polskiej powojennej motoryzacji.
Article aimed to characterize alternative sources of automotive engines propulsion with special emphasis on the producer gas, including wood gas as its variety. Wood gas was in the middle of the last century, cheap and popular fuel used in vehicles. The article describes the wood gas as a fuel, describes its use and effectiveness. The rest of this article presents the results of the qualifying tests of Dodge WC 56 Command car, powered by wood gas, which underwent the qualification tests in the 1953-1954 at the Motor Transport Institute in Warsaw. Analysis of the published for the first time results of the study is an interesting contribution to the history of post-war Polish automotive industry.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 4; 103-108
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model tests of a marine diesel engine powered by a fuel-alcohol mixture
Autorzy:
Zacharewicz, Marcin
Kniaziewicz, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2097626.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
model tests
diesel engine
model adequacy assessment
alternative fuels
diagnostics
badania modelowe
silnik Diesla
ocena adekwatności modelu
paliwa alternatywne
diagnostyka
Opis:
The paper presents the results of model and empirical tests conducted for a marine diesel engine fueled by a blend of n-butanol and diesel oil. The research were aimed at assessing the usefulness of the proprietary diesel engine model in conducting research on marine engines powered by alternative fuels to fossil fuels. The authors defined the measures of adequacy. On their basis, they assessed the adequacy of the mathematical model used. The analysis of the results of the conducted research showed that the developed mathematical model is sufficiently adequate. Therefore, both the mathematical model and the computer program based on it will be used in further work on supplying marine engines with mixtures of diesel oil and biocomponents.
Źródło:
Combustion Engines; 2022, 61, 2; 83--88
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena możliwości zastosowania gazu Browna do współzasilania silnika o zapłonie samoczynnym
Assessment of the possibility of use of gas brown as addition to fuel
Autorzy:
Woźniak, G.
Longwic, R.
Górski, K.
Powiązania:
https://bibliotekanauki.pl/articles/312461.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
paliwa alternatywne
gaz Browna – HHO
silnik wodorowy
ochrona środowiska
alternative fuels
Brown gas
hydrogen engine
enviromental protection
Opis:
Zmniejszenie zanieczyszczeń wynikających ze spalania paliw w środkach transportu jest obecnie wymogiem prawnym w skali globalnej. Gaz Browna jest gazem należącym do alternatywnych źródeł czystej energii, przegląd literatury pokazuje, że mieszanina tego gazu wraz z powietrzem zasilającym silnik, pozwala zwiększyć wydajność spalania i ograniczyć wskaźniki emisji. W artykule przeprowadzona została synteza wiedzy w zakresie zastosowanie gazu Browna jako dodatku do powietrza zasilającego silnik. Omówione zostały główne informacje dotyczące wykorzystania wodoru jako paliwa, a także wskazano dotychczasowe sposoby wykorzystania generatora wodorowego.
Pollution reduction resulting from the emission of fuel combustion is becoming more and more popular all over the world. Brown’s gas is an alternative source of clean energy, the literature review shows that a mixture of this gas and fuel enables to improve efficiency of combustion and reduce emission factors, and only water, which is widely available renewable resource, is necessary for its production. The synthesis of knowledge within the scope of using Brown’s gas as fuel additive was conducted in this article. The main information concerning the use of hydrogen as fuel and the use of hydrogen generator were discussed.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 6; 474-478, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the engine fuels impact on carbon dioxide emissions
Autorzy:
Worsztynowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/247066.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engine
combustion
engine fuels
emission
carbon dioxide
Opis:
The article addresses the topic of carbon dioxide emissions into the atmosphere as the result of the hydrocarbon fuels combustion in the combustion engines. Widespread use of individual means of transportation, where the combustion engines function as the basic propulsion source, has caused that they are one of the main sources of carbon dioxide emission into the atmosphere. Therefore, it has been subjected to some restrictions, similar to those applied towards toxic elements contained with exhaust. One of the most effective ways of restriction of carbon dioxide emission is to decrease fuel consumption. In addition, an important item is the implementation of fuels with less potential to create carbon dioxide as a result of their combustion. The article presents the results of comparative measurements conducted on the engine test stand in terms of prepared load characteristics for a spark ignition engine powered by gasoline as well as by natural gas. On the basis of these measurements the article provides the analysis of the impact of fuel composition and combustible mixture on carbon dioxide content in the exhaust gases. In the next stage of analysis, the criterion for the comparison was the value of carbon dioxide emission with reference to 1 kg of fuel resulting from the measurements and theoretical calculations of fuel combustion. The results of measurements and calculations were shown in forms of graphs. The measurements on a test stand were conducted for the engine of the older generation, whose design corresponds to the motors located in a large number of currently used vehicles. This allows a preliminary estimation of the carbon dioxide emissions coming from means of transport.
Źródło:
Journal of KONES; 2011, 18, 4; 571-575
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Volume contraction in the process of combustion of various fuels in combustion engines
Kontrakcja w procesie spalania różnych paliw w silniku spalinowym
Autorzy:
Worsztynowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/134236.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engine
combustion
contraction
engine fuels
silnik spalinowy
spalanie
kontrakcja
paliwa silnikowe
Opis:
The paper discusses the issues related to the change of volume of the reagents during the process of combustion. The formulas that were necessary to make the calculations were derived for liquid and gaseous fuels. Based on the formulas, theoretical calculations of the change of the kilo-mole number for various fuels depending on the mixture composition were performed. The results of the calculations were presented in the tables. Further, the influence of volume contraction on the parameters of the combustion process was analyzed. In the conclusions, a comparison of the influence of the previously described phenomena on the individual fuels was performed in relation to their chemical composition and the composition of the mixture.
W artykule poruszono zagadnienia związane ze zjawiskiem zmiany objętości reagentów podczas procesu spalania. Wyprowadzono konieczne do obliczeń wzory dla paliw ciekłych i gazowych, na podstawie których przeprowadzono teoretyczne obliczenia zmiany liczby kilomoli dla różnych paliw w zależności o składu mieszanki palnej. Wyniki obliczeń zostały przedstawione w tabelach. Następnie przeanalizowano wpływ zjawiska kontrakcji na parametry procesu spalania. We wnioskach dokonano porównania wpływu opisanych wcześniej zjawisk na poszczególne paliwa w zależności od ich składu chemicznego oraz składu mieszanki palnej.
Źródło:
Combustion Engines; 2013, 52, 3; 72-78
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane właściwości mieszanin oleju rzepakowego z benzyną lotniczą
Selected properties of rapeseed oil and aviation gasoline blends
Autorzy:
Wojdalski, J.
Klimkiewicz, M.
Dróżdż, B.
Mruk, R.
Słoma, J.
Powiązania:
https://bibliotekanauki.pl/articles/288193.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
olej rzepakowy
benzyna lotnicza
paliwo silnikowe
rapeseed oil
aviation gasoline
engine fuels
Opis:
Przedstawiono wyniki badań, których celem było określenie wpływu dodatku benzyny lotniczej Jet-A1 do oleju rzepakowego na wybrane właściwości mieszanin, mogących mieć zastosowanie jako paliwo silnikowe. Porównano właściwości składników oraz mieszanin składających się z oleju rzepakowego z benzyną lotniczą Jet-A1 w ilościach 10%, 20% i 30% (v/v). Zbadano przebiegi destylacji oraz gęstość i lepkość poszczególnych produktów. Zwiększenie udziału benzyny lotniczej Jet-A1 do 30% w mieszaninie z olejem rzepakowym wpłynęło na zmniejszenie lepkości kinematycznej produktu z 34,0mm2·s-1 do 15,5mm2·s-1 oraz gęstości z 921,0kg·m-3 do 890,9kg·m-3.
The paper presents the results of a study aimed at determining the effect of rapeseed oil enhanced with aviation gasoline Jet-A1 on the properties of engine fuel mixtures. The properties of ingredients and mixtures composed of rapeseed oil and aviation gasoline Jet-A1 in the amount of 10%, 20% and 30% (v/v) were compared. The distillation process was analyzed, and the density and viscosity of each product were determined. The addition of 30% aviation gasoline Jet-A1 to the mixture with rapeseed oil reduced viscosity from 34.0mm2·s-1 to 15.6mm2·s-1 and density from 921.0kg·m-3 to 890.9kg·m-3.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 2, t. 1, 2, t. 1; 349-358
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The diesel and the vegetable oil properties assessment in terms of pumping capability and cooperation with internal combustion engine fuelling system
Autorzy:
Szpica, D.
Czaban, J.
Banaszuk, P.
Weresa, E.
Powiązania:
https://bibliotekanauki.pl/articles/386947.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
internal combustion engine
alternative fuels
rheological properties
silnik spalinowy
paliwa alternatywne
właściwości reologiczne
Opis:
In the paper, the results of preliminary diesel and vegetable oil research were shown, the subject of which were directly intended to be the fuel for powering compression ignition engines. In the times of climate protection and more strict standards concerning combustion gas emissions, the fuel production and transportation process became an important aspect. Decentralization of this process and enabling fuel obtaining directly from cultivation (oleaginous plants) let limit the global CO2 emission. This is why the preliminary assessment of two fuel sorts properties was attempted, on one side, the basic one, which is the diesel, on the other side - vegetable oil. Prior to subjecting the compression ignition engine to the process of adaptation to vegetable fuelling, the properties of the fuel responsible for pumping should be assessed (mainly viscosity) and friction nodes cooperation (lubricity). The first of researched parameters is the base to elaborating the system of engine controlling algorithm or the range of changes in construction of powering system. The second one is the wear issue - object fitness and repairing overhauls.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 1; 14-18
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagrożenia płynące ze stosowania paliw alternatywnych w samochodach
Risks associated with the use of alternative fuels in cars engines
Autorzy:
Szada-Borzyszkowski, W.
Bujaczek, R.
Powiązania:
https://bibliotekanauki.pl/articles/314248.pdf
Data publikacji:
2014
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
paliwa alternatywne
spalanie paliw
silnik
zagrożenia i ochrona środowiska
ochrona środowiska
alternative fuels
fuel combustion
engine
threats and protection of the environment
protection of the environment
Opis:
W artykule scharakteryzowano alternatywne źródła zasilania silników samochodowych. Przedstawiono korzyści oraz ograniczenia w stosowaniu tego rodzaju paliw. W szczególności opisane zostały zagrożenia ekologiczne i niebezpieczeństwa jakie płyną ze stosowania paliw alternatywnych w pojazdach. Scharakteryzowane zostały obecnie najczęściej stosowane paliwa alternatywne (paliwa gazowe, alkoholowe, roślinne, napędy hybrydowe i wodorowe) mające szczególny wpływ na bezpieczeństwo ich użytkowania.
The article describes an alternative power source car engines. Presents the benefits and limitations in the use of this type of fuel. In particu-lar, describes the environmental risks and dangers that come from the use of alternative fuels in vehicles. Been characterized most commonly used alternative fuel today (gas, alcohol, vegetable hybrids and hydrogen) with a particular impact on the safety of their use.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2014, 15, 6; 260-265
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The gas-air mixing systems for the industrial gas engine fuelled with low quality gas
Autorzy:
Sutkowski, Marek
Kapusta, Łukasz Jan
Pilarska, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/133599.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
industrial gas engine
low quality fuels
genset efficiency
emissions
przemysłowy silnik gazowy
paliwa niskiej jakości
genset
emisje
Opis:
Modifications of standard fuel system for an industrial gas engine and an analysis of the engine operation on low quality fuel have been described in this paper. The implemented fuel system modifications aim to overcome the challenges which arise when standard fuel gas is replaced by low quality one. Analysis focuses on stability of mixture formation esp. on variations in gas distribution for each cylinder of the engine. The results and discussion include also emissions optimization impact on efficiency as well as the efficiency and emissions level dependency on fuel type.
Źródło:
Combustion Engines; 2019, 58, 4; 182-185
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of energy and emission indicators of a piston engine supplied by a mixture of biogas
Autorzy:
Stępniak, D.
Surwiło, J.
Lampart, P.
Szymaniak, M.
Powiązania:
https://bibliotekanauki.pl/articles/175362.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
piston combustion engine
low caloric fuels
biogas
CO
CO₂
NOx emission
Opis:
The paper presents the methodology and results of research focused on experimental investigation of combustion of biogas fuels in a combustion piston engine. The study highlights the variability of exhaust gases parameters produced by the engine running in an idle mode and in a generation mode. The experimental analysis includes research about variability of temperature in the cylinders, depending on the composition of fuel used to supply the engine. The qualitative and quantitative analysis of exhaust gases extends on biogas substitutes with different proportions of CH₄ and CO₂. Characteristics of a piston combustion engine were created, including CO, CO₂, NOx emission indicators, for a range of engine load and fuel composition.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2016, 134; 109-120
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposit forming tendency in sparkignition engines and evaluation of gasoline detergent additives effectiveness
Autorzy:
Stępień, Z.
Oleksiak, S.
Powiązania:
https://bibliotekanauki.pl/articles/242321.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
deposits
detergent additives
engine fuels
test methods
Opis:
The paper describes influence of legislation requirements on development of spark ignition engines construction and new expectations towards today's fuels and detergent-dispersant additives. Paper presents development history of fuel additives especially of detergent additives. It indicates most critical places of engine deposits formation and its impact on fuel consumption, emission and vehicle driveability. It describes also the most popular engine tests methods for evaluation of deposits forming tendency on intake valves and combustion chambers and detergent additives effectiveness, focusing on CEC (Coordinating European Council for the Development of Performance Tests for Transportation Fuels, Lubricants and Other Fluids) test methods by using of Mercedes Ml 02 (CEC F-05 - 93 - Inlet Valve Cleanliness in the MB Ml02E Engine) and Mili engines (CEC F-20 - Test Method For Inlet Valve Cleanliness). CEC test methods has been approved both by fuel producers and engine and vehicles manufacturer, what is noted e.g. in World Wide Fuel Charter. From many years in major of these Groups, representatives of Oil and gas Institute (earlier as Petroleum Processing Institute) had an active part. Deposits formed in the injectors, intake valves and combustion chambers of gas o line engines can cause various performance and emissions problems.
Źródło:
Journal of KONES; 2009, 16, 2; 421-431
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposits in spark ignition engines – formation and threats
Osady w tłokowych silnikach spalinowych ZI – tworzenie i zagrożenie
Autorzy:
Stępień, Z.
Powiązania:
https://bibliotekanauki.pl/articles/133841.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
engine deposits
engine fuels
detergents
operation of combustion engines
osady silnikowe
paliwa silnikowe
dodatki detergentowe
eksploatacja silników spalinowych
Opis:
The paper reports on both the processes of harmful deposits formation in spark ignition engines and their threats related to engine operation. The connection of a dynamic development of piston engines and fuel injection systems with increasing problems of deposits formation on various engine parts has been discussed at length. The effect of fuel composition, engine design and its operating parameters on the formation of a variety of engine deposits has been described. Possible causes of deposits formation have also been indicated. The paper confirms great importance of modern deposit control detergents and state-of-the-art technology of manufacturing of injection systems components in counteracting this detrimental phenomenon.
W artykule omówiono procesy tworzenia szkodliwych osadów w tłokowych silnikach spalinowych ZI i zagrożenia, jakie one stwarzają podczas eksploatacji silników. Przedyskutowano powiązanie rozwoju silników tłokowych oraz układów wtrysku paliwa z narastającymi problemami powstawania osadów na różnych elementach silników. Opisano wpływ kompozycji paliwa, konstrukcji silnika i warunków jego eksploatacji na różne osady silnikowe. Wskazano możliwe przyczyny tworzenia osadów. Podkreślono ogromne znaczenie dodatków detergentowych, a także zmian w technologii wykonywania i obróbki elementów układów wtrysku paliwa w przeciwdziałaniu szkodliwym procesom tworzenia osadów.
Źródło:
Combustion Engines; 2015, 54, 1; 36-48
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of "CEC" engine test methods for fuels performance
Rozwój silnikowych metod badawczych "CEC" do oceny właściwości użytkowych paliw
Autorzy:
Stępień, Z.
Oleksiak, S.
Dybich, K.
Powiązania:
https://bibliotekanauki.pl/articles/242725.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
paliwa silnikowe
silniki spalinowe
metody badawcze
CEC
osady
engine fuels
combustion engines
test methods
deposits
Opis:
CEC (Co-ordinating European Council) jest organizacją europejskich stowarzyszeń przemysłowych (ACEA, ATIEL, ATC i CONCAWE), której zadaniem jest opracowywanie, rozpowszechnianie i rozwój metod badań paliw silnikowych, środków smarowych i innych płynów eksploatacyjnych dla potrzeb transportu. W artykule omówiono wyniki działalności grup roboczych CEC, tworzących i doskonalących silnikowe metody badania właściwości użytkowych paliw. W pracach większości tych grup roboczych czynny udział biorą od wielu lat przedstawiciele Instytutu Technologii Nafty, wnosząc swój wkład w rozwój przedmiotowych metod o kluczowym, międzynarodowym znaczeniu. W dziedzinie paliw do silników z zapłonem iskrowym (ZI) przedstawiono metody badawcze CEC F-04-87 (Opel Kadett), CEC F-05-93 (M 102E) i CEC F-20-98 (M111) stosowane do oceny skłonności benzyn do tworzenia osadów w układach dolotowych, na zaworach i w komorach spalania silników oraz procedurę CEC F-16-96 (VW Water Boxer) wykorzystywaną do oceny tendencji do zawieszania się zaworów dolotowych. Wspomniano także o pracach grupy roboczej TDG-F-034, której zadaniem było wprowadzanie testu do oceny wpływu paliwa na zanieczyszczenie układu dolotowego, a także rozpylaczy silnika z zapłonem iskrowym i bezpośrednim wtryskiem benzyny. W dziedzinie paliw do silników z zapłonem samoczynnym (ZS) omówiono procedurę CEC F-23-01 umożliwiającą w sposób miarodajny określanie tendencji paliwa do zakoksowania rozpylaczy wtryskiwaczy silnika Peugeot XUD9 A/L oraz wyniki prac grup roboczych TDG-F-035 i ostatnio utworzonej, zastępującej ją grupy TDG-F-098, przygotowujących nową metodę oceny tego zjawiska z zastosowaniem nowoczesnego silnika ZS z bezpośrednim, wysokociśnieniowym wtryskiem paliwa.
CEC (Co-ordinating European Council) is an industry-based organisation for the development of new test procedures for the performance testing of Automotive Engine Oil, Fuels & Transmission Fluids (using gasoline & diesel engines). CEC represents the Automotive Fuels, Lubricants, Additives and allied industries in the development ofperformance tests, usually via their European Industry groups; ACEA, ATIEL, ATC and CONCAWE. CEC Test Methods are used extensively by the automotive and petroleum industries in Europe and throughout the world. In paper were described results of CEC Working Groups, creating and improving engine test methods for fuels performance evaluation. From many years in major of these Groups representatives of Petroleum Processing Institute took an active part. In field of gasoline fuels test methods CEC F-04-87 (Opel Kadett), CEC F-05-93 (M 102E) and CEC F-20-98 (M111), used to evaluation of deposit tendency on valves and combustion chamber, were presented. Also procedure CEC F-16-96 (VW Water Boxer) for determination of inlet valve sticking tendency of gasoline fuels was presented. The work of Group TDG-F-034, trying to introduce test method for evaluation of tendency to deposit formation in inlet system and nozzles of direct injection gasoline engine, was mentioned. In field of diesel fuels procedure CEC F-23-01, enabling to determine of diesel fuel tendency to coking of engine Peugeot XUD9 A/L injector nozzle, was presented. Also was mentioned the activity of Working Group TDG-F-035, and replaced it recently by Working Group TDG-F-098, preparing new test method for evaluation this phenomena by use of modern CI engine with direct, high pressure fuel injection system.
Źródło:
Journal of KONES; 2007, 14, 4; 463-470
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies