Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "emissivity" wg kryterium: Temat


Tytuł:
Analiza czynników składowych błędów pirometrii radiacyjnej
Analysis of component factors of radiative pirometry errors
Autorzy:
Hots, N.
Piątkowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/157685.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiary temperatury
pirometry
emisyjność
temperature measurements
pyrometers
emissivity
Opis:
W artykule zamieszczono analizę źródeł błędów pomiaru temperatury w jednopasmowej pirometrii radiacyjnej w zakresie temperatur od 0°C do 500°C. Wykonano pomiary zmian emisyjności w funkcji temperatury dla utlenionej stali z pieca cementowego oraz stopu aluminium. Przedstawio-no algorytm obliczeń błędu pomiarowego w pirometrze. Wyznaczono za jego pomocą wpływ takich czynników jak błąd określenia emisyjności, wpływ promieniowania tła oraz emisyjność zmienną z temperaturą obiektu.
The paper describes error sources in non-contact, single band pyrometer temperature measurements within the range 0-500°C. The main causes of measurement errors are summarized in Table1. The relation between the emissivity and temperature was measured for the oxidized steel interior of cement kiln and aluminum alloy. The measurement results are shown in Fig. 2. The algorithm of calibration procedure and approximation of the calibration curve are presented. The errors introduced by calibration (Fig. 3.) and the method for error estimation in a virtual pyrometer are given. The influence of physical parameters of the measured object and its surrounding on the radiative temperature measurement accuracy is discussed. The mentioned algorithm was also used to determine the influence of such factors as the emissivity assessment error (Fig. 4) and the error caused by temperature dependence of the object emissivity (Fig. 5). The magnitude of measurement error resulting from reflected background temperature was also determined (Fig. 6). The methods for diminishing the effect of the considered factors on the result of radiative temperature measurements are proposed.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 11, 11; 874-877
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of 3D metallic structures for IR emitters with gradient temperature distribution
Zastosowanie struktur przestrzennych emiterów metalicznych do wytwarzania gradientowych promienników podczerwieni
Autorzy:
Polakowski, H.
Zarański, Z.
Piątkowski, T.
Sulej, S.
Trzaskawka, P.
Powiązania:
https://bibliotekanauki.pl/articles/209590.pdf
Data publikacji:
2014
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
kamera termowizyjna
emisyjność
obróbka elektroerozyjna
struktura geometryczna powierzchni
thermal camera
emissivity
electrical discharge machining
surface texture
Opis:
Badania porównawcze kamer termowizyjnych, służących do obserwacji sceny termalnej, sprowadzają się zwykle do obserwacji wzorcowych różnic temperatury lub wzorcowego kontrastu termicznego. Standardowe badania wykonuje się zwykle przy wykorzystaniu drogich wzorcowych źródeł promieniowania, które tworzą wraz z dodatkowymi elementami powszechnie stosowany test czteropaskowy. W pracy przedstawiono sposoby wykonania metodami WEDM promienników podczerwieni spełniających rolę płytek testowych, w postaci metalowej grzebieniowej struktury przestrzennej. Właściwości promienne takiego promiennika zależą od współczynnika emisyjności, charakterystycznego dla powierzchni płaskiej materiału wyjściowego oraz parametrów geometrycznych struktury grzebieniowej. Płytki tego typu promienników wymagają mniej złożonych systemów kontroli temperatury, są bardziej stabilne w czasie oraz zapewniają dodatkowe możliwości metrologiczne, niemożliwe do uzyskania innymi metodami.
Comparative evaluation of thermal camera relies mainly on the measurements of standard temperature difference or thermal contrast. The tests are usually performed using expensive IR sources and standard four-bar pattern, which cannot reproduce stepped or gradient temperature distribution required across camera’s field of view [1]. The paper presents IR emitters capable of creating such temperature distribution patterns. The emitters are 3D comb-like patterns, manufactured using WEDM (wire electrical discharge machining) method. Radiative properties of such structures depend on the emissivity of base material and geometry of manufactured structure. Presented emitters require less sophisticated temperature control solutions and yet they exhibit better temperature stability. Additionally, they provide metrological features that cannot be achieved using standard test procedures [2].
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2014, 63, 2; 125-137
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Appointing of surface topography parameters to describe the diffuse reflective properties of selected dielectrics
Autorzy:
Majchrowski, R.
Rozanski, L.
Grochalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/114434.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
thermographic measurements
surface topography
emissivity
reflection
Opis:
The investigations have been performed in order to choose the specific roughness parameters, which would inform the customer about the diffuse emissive and reflective characteristics of the adhesive tapes used in the thermographic measurements. To achieve that, a series of the surface topography parameters of various adhesive tapes (i.e. objects with diffusive reflective characteristics) and various glass plates (i.e. objects with directional reflective characteristics) has been examined. For the analysis of surface topography the following parameters were selected: Sdr (the Developed Interfacial Area Ratio) and Sdq (the Root Mean Square Surface Slope). These selected parameters seem to be most suitable to describe the properties of the surface in the discussed aspect.
Źródło:
Measurement Automation Monitoring; 2017, 63, 3; 78-81
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania emisyjności żużla stalowniczego w zakresie podczerwieni MWIR i LWIR
Steel slag emissivity research in MWIR and LWIR infrared ranges
Autorzy:
Więcek, B.
Świątczak, T.
Olbrycht, R.
Wittchen, W.
Borecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/157655.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
termowizja
żużel
emisyjność
thermovision
slag
emissivity
Opis:
W pracy przedstawiono wstępne badania emisyjności żużla stalowniczego w dwóch zakresach widmowych podczerwieni MWIR i LWIR. Wyniki wykazały znaczące różnice emisyjności spektralnej, co można wykorzystać do określenia parametrów żużla stalowniczego. Ideą prowadzonych badań jest poszukiwanie nowych zastosowań termowizji w metalurgii stali.
In this work, the preliminary results of emissivity for steel slag measured in two spectral ranges, MWIR and LWIR are presented. The investigations confirmed significant difference of spectral emissivity. The results can be used for estimation of technological parameters in the steel slag. The idea of the investigations presented in this paper can be useful in searching new applications of the thermovision in ferrous metallurgy.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 11, 11; 914-918
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania właściwości radiacyjnych materiałów ochron osobistych
The Study on Radiative Properties of Personal Protective Clothing Materials
Autorzy:
Wiśniewski, T. S.
Polakowski, H.
Powiązania:
https://bibliotekanauki.pl/articles/137079.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
ochrony osobiste
promieniowanie cieplne
emisyjność
transmisyjność
personal protective clothing
thermal radiation
emissivity
transmittance
Opis:
Właściwości radiacyjne materiałów ochron osobistych strażaków mają kluczowe znaczenie dla ich skuteczności w ochronie przed skutkami promieniowania cieplnego. Zasadniczym parametrem decydującym o właściwościach termoizolacyjnych tych ochron, dla wszystkich powierzchni jest emisyjność, zaś dla materiałów transparentnych dla promieniowania cieplnego, także ich przepuszczalność. W niniejszym artykule zaprezentowano sposób wykonania pomiarów emisyjności i przepuszczalności (transmitancji) materiałów ochron osobistych strażaków, takich jak ubrania specjalne i buty. Przedstawiono i przedyskutowano wyniki badań wykonanych dla nowych zestawów tkanin ubraniowych i dla pakietów poddanych działaniu różnych źródeł ciepła.
The radiative properties of personal protective clothing materials for firefighters are crucial to their effectiveness in protecting against the effects of thermal radiation. The main factor determining thermal insulation properties for all surfaces of protective materials is emissivity, and for materials transparent for thermal radiation, also their transmittance. Measurement methods for emissivity and transmittance of personal protective clothing materials for firefighters, such as special garments and boots are presented in this paper. The results of research carried out for new sets of materials and for packages of fabrics exposed to different sources of heat are presented and discussed.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2016, 2, 58; 193-206
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka procesu termicznego zgazowywania modeli polistyrenowych
Characteristics of the thermal process of polystyrene model gasification
Autorzy:
Żółkiewicz, Z.
Baliński, A.
Żółkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/391524.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
modele zgazowywane
polistyren
wydzielalność gazów
gasified models
polystyrene
gas emissivity
Opis:
W artykule przedstawiono analizę procesu termicznego zgazowywania modeli polistyrenowych. Opisano badania wpływu temperatury na kinetykę zgazowywania badanych próbek modeli polistyrenowych. Dokonano analizy wyników badań termograwimetrycznych (DTG) kopolimeru PS oraz podano, jaki rodzaj związków chemicznych wydziela się w określonej wartości temperatury w wyniku rozkładu termicznego spienionego polistyrenu.
The article presents an analysis of the thermal process of polystyrene model gasification. It discusses the investigation results of the effect of temperature on the gasification kinetics of the examined polystyrene model samples. It analyzes the results of thermogravimetric tests (DTG) of copolymer PS and points to the type of chemical compounds emitted at a given temperature as a result of the thermal decomposition of expanded polystyrene.
Źródło:
Prace Instytutu Odlewnictwa; 2017, 57, 3; 201-210
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of direct and inverse methods of satellite observations downscaling for the coastal zone area
Autorzy:
Chybicki, A.
Łubniewski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/331736.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
Earth observation
land surface temperature
sea surface temperature
PBIM downscaling method
surface effective emissivity
Opis:
The Earth observation satellite imaging systems have known limitations, especially regarding their spatial and temporal resolution. Therefore, approaches which aim to combine data retrieved from sensors of higher temporal and lower spatial resolution with the data characterized by lower temporal but higher spatial resolution are of high interest. This allows for joint utilization of the advantages of both these types of sensors. As there are several ways to achieve this goal, in this paper two approaches, direct and inverse, of downscaling the land surface temperature (LST) derived from low resolution imagery acquired by the Advanced Very High Resolution Radiometer (AVHRR) were evaluated. The applied downscaling methods utilize biophysical properties of the surface sensed using short wave infrared and thermal band. The presented algorithm evaluation was performed on the basis of a specific test case: the coastal zone area of the Gulf of Gdańsk, Poland. In this context, the objective presented in the study was to compare two methods of downscaling for a specific test case in order to evaluate how the proposed approaches cope with the specific conditions of the coastal zone area.
Źródło:
Hydroacoustics; 2016, 19; 55-64
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compatibility of the λ- Kolmogorov test for the brake disc emissivity factor distribution in thermal imaging studies
Autorzy:
Sawczuk, W.
Pagórek, B.
Powiązania:
https://bibliotekanauki.pl/articles/114266.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
emissivity factor
brake disc
exponential distribution
Opis:
A thermal imaging camera is widely used in railway, it allows evaluating the wheel-rail contact while rolling the wheel set on the rails [3], cracks of the railway tracks [22] or identify overheated axle bearings of the wheel sets of the railway cars. In studies of braking systems both railway and vehicular ones on brake positions, the thermal imaging measurements are little used. Only in the qualitative assessment, an IR camera can identify the phenomenon of "hot spots" on the brake disc [1, 12, 15]. When testing the disc brake friction pairs, the most difficult is the brake disc and determination of its actual temperature which, due to the polished smooth surface by friction with the friction pad, is a low-carbon object. This type of objects force the person who makes the measurements to do a very precise configuration of the thermal imaging camera in order to determine the emissivity factor. An additional difficulty in the thermal imaging of braking systems is a dynamically changeable nature of the work associated with changes in the rotational speed of the brake disc and a nonlinear increase in its temperature. The paper presents the results of the studies conducted parallel with the thermal imaging measurements by using thermocouples to determine variability of the experimental emissivity factor of the brake disc supported by the λ-Kolmogorov compatibility test.
Źródło:
Measurement Automation Monitoring; 2016, 62, 2; 56-61
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of emissivity coefficient of heat-resistant super alloys and cemented carbide
Autorzy:
Kieruj, P.
Przestacki, D.
Chwalczuk, T.
Powiązania:
https://bibliotekanauki.pl/articles/94096.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
nickel alloys
emissivity coefficient
tungsten carbides
stopy niklu
współczynnik emisyjności
węgliki wolframu
Opis:
This paper presents the analysis of emissivity engineering materials according to temperature. Experiment is concerned on difficult to machine materials, which may be turned with laser assisting. Cylindrical samples made of nickel-based alloys Inconel 625, Inconel 718, Waspaloy and tungsten-carbides based on cobalt matrix were analyzed. The samples’ temperature in contact method was compared to the temperature measured by non-contact pyrometers. Based on this relative, the value of the emissivity coefficient was adjusted to the right indication on pyrometers.
Źródło:
Archives of Mechanical Technology and Materials; 2016, 36; 30-34
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining of a passenger car fire temperature
Autorzy:
Szajewska, A.
Świder, R.
Rybiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/114316.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
emissivity
thermal camera
thermogram
fireman
fire environment
firefighting
Opis:
A fire test was carried out. In the test a lift back passenger car with LPG system was burnt. Fire footprints, visible only in IR were observed with a thermal camera. Temperature was measured at specific points of the car and results were presented in graphs. Comparative measurements of surface temperature were taken by a thermocouple and thermal camera. Value of emissivity coefficient was delimited using ThermaCAM Researcher programme, by Flir Co.
Źródło:
Measurement Automation Monitoring; 2015, 61, 6; 275-277
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining the emissivity at the tool-chip interface during S235JR steel turning
Autorzy:
Molenda, J.
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/242890.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
turning
infrared measurement
tool-chip interface temperature
emissivity
Opis:
Temperature on the chip-tool interface is important parameters in the analysis and control of turning process. Due to the high shear and friction, energies dissipated during a machining operation the temperature in the primary and secondary shear zones are usually very high; hence, affect the shear deformation and tool wear. In a single point cutting, heat is generated at three different zones i.e. primary shear zone, chip tool interface and the tool-workpiece interface. The primary shear zone temperature affects the mechanical properties of the work piece – chip material and temperatures at tool-chip and tool-work piece interfaces influence tool wear at tool face and flank respectively. Total tool wear rate and crater wear on the rake face are strongly influenced by the temperature at chip-tool interface. Therefore, it is desirable to determine the temperatures of the tool and chip interface to analyse or control the process. To measure the temperature at the tool-chip interface many experimental methods have been developed over the past century. Since at the interface there is a moving contact between the tool and chip in this work, authors propose infrared method for temperature measuring. To assure possibly high accurate of noncontact temperature measurement there is a need to keep in mind several factors, including determining appropriate value of emissivity. In this work, authors present results of experimental determining emissivity value of tool-chip interface. As initial value, emissivity of polished steel was taken.
Źródło:
Journal of KONES; 2015, 22, 2; 149-154
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Device for emissivity estimation in LWIR range
Autorzy:
Olbrycht, R.
Powiązania:
https://bibliotekanauki.pl/articles/114198.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
emissivity
infrared
thermal camera
Opis:
The paper deals with the influence of emissivity on infrared measurements (Tab. 1; Fig. 1-3) and presents the developed device for emissivity estimation (Fig. 4). There is comparison shown between the reference emissivity values measured with thermal camera (Fig. 5) and estimated with the developed device (Tab. 2). Obtained results are in good agreement for three examined samples with emissivity ranging from 0.1 to 0.95.
Źródło:
Measurement Automation Monitoring; 2017, 63, 3; 90-93
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka termowizyjna układów elektronicznych
Thermographic diagnostics of the electronic systems
Autorzy:
Hulewicz, Arkadiusz
Dziarski, Krzysztof
Krawiecki, Zbigniew
Antecki, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/34655809.pdf
Data publikacji:
2022
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
kamera termowizyjna
współczynnik emisyjności
promieniowanie podczerwone
natężenie promieniowania
thermographic camera
emissivity factor
infrared radiation
radiation intensity
Opis:
Tematyka artykułu związana jest z pomiarami termowizyjnymi i ich wykorzystaniem w diagnostyce układów elektronicznych. Dostępność kamer termowizyjnych przyczynia się do wszechstronnego ich zastosowania. Jedną z dziedzin wykorzystujących kamery termowizyjne jest diagnostyka układów elektronicznych. Umożliwia ona odpowiednio wczesne wykrycie przyszłych uszkodzeń objawiających się wzrostem temperatury, a także ocenę właściwego doboru elementów elektronicznych i metod ich chłodzenia. W artykule przedstawiono podstawowe zagadnienia związane z pomiarami termowizyjnymi, omówiono najważniejsze źródła błędów występujące podczas pomiarów termowizyjnych elementów elektronicznych. Przedstawiono stanowisko pomiarowe do termowizyjnej diagnostyki elementów elektronicznych oraz wyniki badań przeprowadzonych na elementach elektronicznych działających w warunkach rzeczywistych.
The subject of the article is related to the thermographic measurements and their use in the diagnostics of the electronic systems. The availability of the thermographic cameras contributes to their versatile use. One of the areas that use the thermographic cameras is the diagnostics of the electronic systems. It enables the early detection of the future damage manifested by an increase in temperature, as well as the assessment of the correct selection of the electronic components and the methods of their cooling. The article presents the basic issues related to the thermographic measurements, discusses the most important sources of errors occurring during the thermographic measurements of the electronic components. The paper presents the measuring station for the thermographic diagnostics of the electronic components and the results of the tests carried out on the electronic components operating in real conditions.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2022, 107; 5-16
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Economic growth and carbon dioxide emissions
Wzrost gospodarczy a emisja dwutlenku węgla
Autorzy:
Famielec, Józefa
Kijanka, Anna
Renata Żaba-Nieroda, Renata
Powiązania:
https://bibliotekanauki.pl/articles/962484.pdf
Data publikacji:
2019
Wydawca:
Główny Urząd Statystyczny
Tematy:
emisyjność PKB
emisje CO2
zanieczyszczenie
wzrost gospodarczy
emissivity of gdp
co2 emissions
pollution
economic growth
Opis:
The emissions of carbon dioxide (CO2) are an objective result of the civilizational development of the world. Ensuring a steady decline in CO2 emissions in the conditions of economic growth and social welfare requires a structural analysis of systemic dependencies. The purpose of the study is to investigate the contribution of different socio- -economic factors to the changes in carbon dioxide emissions. A decomposition analysis is performed to examine the pace of CO2 emission changes in relation to changes in: emissivity of gross domestic product (GDP), productivity of man-hours, number of employees and working time per employee. Statistical data refer to the Polish economy in the period of 1990—2015. The results provided in this paper show that the economic growth in Poland had the most noticeable contribution to CO2 emission changes. The solid growth of economy was accompanied by decreasing emissivity of GDP. The increase in the labour supply, observed in some periods, contributed to the relative growth of that factor in pollutant emission changes. Considering the growing labour productivity, efforts to increase employment should be correlated with decreasing number of working hours per employee.
Emisja dwutlenku węgla (CO2) jest obiektywnym skutkiem rozwoju cywilizacyjnego świata. Zapewnienie stałego spadku emisji CO2 w warunkach wzrostu gospodarczego i dobrobytu społecznego wymaga strukturalnej analizy zależności systemowych. Celem niniejszego opracowania jest zbadanie udziału różnych czynników społeczno- -gospodarczych w kształtowaniu się zmian emisji CO2. Analizę przeprowadzono na podstawie dekompozycji tempa zmian emisji CO2 w odniesieniu do zmian: emisyjności produktu krajowego brutto (PKB), produktywności roboczogodziny, liczby zatrudnionych i czasu pracy jednego zatrudnionego. Wykorzystano dane statystyczne odnoszące się do gospodarki w Polsce. Przyjęto okres badawczy obejmujący lata 1990—2015. Wyniki badań pokazują, że najbardziej znaczący wkład w zmiany emisji CO2 w Polsce miał wzrost gospodarczy. Stałemu wzrostowi gospodarczemu towarzyszył spadek emisyjności PKB. Obserwowany w niektórych okresach wzrost podaży pracy przyczyniał się do wzrostu udziału tego czynnika w zmianach emisji zanieczyszczeń. Biorąc pod uwagę rosnącą produktywność siły roboczej, wysiłkom zmierzającym do zwiększenia wielkości zatrudnienia powinno towarzyszyć zmniejszanie się liczby godzin pracy jednego pracownika.
Źródło:
Wiadomości Statystyczne. The Polish Statistician; 2019, 64, 4; 5-21
0043-518X
Pojawia się w:
Wiadomości Statystyczne. The Polish Statistician
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emissivity measurement of black paint using the calorimetric method
Autorzy:
Pelińska-Olko, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/27312234.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
calorimetric method
emissivity
thermosensitive materials
polymers
plastics
Opis:
The paper is of practical importance and describes the construction of a test rig and the measurement method for determining the relative emissivity coefficient of thermosensitive thin polymer coatings. Polymers are high-molecular chemical compounds that produce chains of repeating elements called ‘mers’. The polymers can be natural and artificial. The former ones form the building material for living organisms, the latter – for plastics. In this work, the words plastics and polymers are used as synonyms. Some plastics are thermosensitive materials with specific physical and chemical properties. The calorimetric method mentioned in the title consists of two steps. The first stage, described here, involves very accurately measuring the emissivity of black paint with the highest possible relative emissivity coefficient, which covers the surface of the heater and the inner surface of the chamber. In the second step, the thermosensitive polymer will be placed on the inner surface of the chamber, while black paint with a known emissivity coefficient will remain on the heater. Such a way of determining the properties of thermosensitive polymers will increase the error of the method itself, but at the same time will avoid melting of the polymer coating. During the tests, the results of which are presented in this work, the emissivity coefficient of the black paint was obtained in the range of 0.958–0.965.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 161--177
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies