Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "dynamic impact" wg kryterium: Temat


Tytuł:
Analysis of stress-strain state of plates under impact loading
Autorzy:
Astanin, V. V.
Borodachov, M. M.
Bogdan, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/243346.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
impact loads
dynamic loads
plate
strengthened ribs
plate with damages
numerical methods
stress-strain state
Opis:
The problem concerning the stress-strain state of a plate under impact load with various intensity levels of collision momentum applying finite-element method was considered. The problem concerning transversal impact of a body in form of a mass point or a finite body to the sheet-formed structures of following type: a plate, a plate strengthened by ribs, a plate with damages was considered. Problem design diagram, design diagram of plate, fields of deflection intensities distribution w for plate central surface, stress distribution fields of the plate based layer, stress distribution fields of the plate based layer equivalent stresses sigma eq =f(m), relations for sigma eq = f(m) and w = f(m) at variation of impact initial velocity, impulse form of view, deflection and equivalent stress sigma eq intensity distribution diagrams in cross-section Kn depending on view form of impulse, the diagram of plate's deflections, the stress field sigma eq of the plate caused by impact body of finite dimensions, the field of deflection intensity distributions w for damage plate, the field of equivalent stress intensity distributions sigma eq for damage plate, the structure diagram of plate with stringers, the deflection field of plate with stringers, diagrams of equivalent stresses sigma eq of plate with stringers in central cross-section along axis x at damage deeps are presented in the paper.
Źródło:
Journal of KONES; 2008, 15, 1; 5-15
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental complex for material impact strength researches
Autorzy:
Astanin, V. V.
Olefir, G. O.
Balalaey, A. V.
Powiązania:
https://bibliotekanauki.pl/articles/243348.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
impact loads
dynamic loads
residual deformation
composite materials
thermogas ballistic installation
deformation measurement device
Opis:
The objective has been stated to investigate the capability of materials and structures to with stand to impact loading. Computerized research complex has been developed and manufactured to carry out experiments on impact interaction of specimen with an accelerated to a certain velocity piercer. The complex includes ,,GANCHEN"-type thermogas ballistic gun for piercer accelerating, piercer velocimeter, ballistic pendulum for measurement of integral energy datum of piercer-specimen interaction, and ,,ODD" device for measurement of residual deformation of the specimen. The experiment progress control, gaging equipment sensor signal processing and obtained information data storage are accomplished at researches. The elaborated system and research techniques permit carrying out a series of comparative check tests of specimens of different metal-composite constructions. Measurement of damages of a multilayer composite surface, the principal scheme of the thermal gas ballistic laboratory installation, basic and structural schemes of optical detector of deformations ODD-C, dependence of the optical gauge displacement, a screenshot of the developed software for the ,,ODD" device operation, the scheme of the contactless surface deformation damages scanning method, calculation algorithm of the scanned surface coordinates, appearance of the material samples after punching with a spherical piercer and computer representation of measurements of damaged zones, results of research of metal-plastic composites, increase of ability of samples to absorb the energy of the sphere, discrete character of deformation distribution are presented in the paper.
Źródło:
Journal of KONES; 2008, 15, 1; 17-28
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niekorzystne oddziaływania taboru szynowego w mieście
Disadvantageous influences of the rail camp in the city
Autorzy:
Błaszczyński, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2055949.pdf
Data publikacji:
2021
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
linia tramwajowa
Polska
historia
tabor szynowy
oddziaływanie dynamiczne
oddziaływanie akustyczne
hałas
pomiar akustyczny
poziom dźwięku
tło akustyczne
tram line
Polska
history
rolling stock
dynamic impact
acoustic impact
noise
acoustic measurement
sound level
acoustic background
Opis:
Wieloletnie zaniedbania w modernizację linii tramwajowych oraz wzrost natężenia i tonażu w ruchu drogowym spowodował dewastację istniejącej infrastruktury komunikacyjnej. Niestety wiążą się z tym również niekorzystne oddziaływania taboru tramwajowego na środowisko. Do niekorzystnych oddziaływań taboru tramwajowego możemy zaliczyć oddziaływania dynamiczne i akustyczne. Szczególnie dokuczliwe są wpływy akustyczne, gdyż ich strefa oddziaływania jest znacznie większa niż wpływów dynamicznych. W pracy zostaną szczegółowo przedstawione niekorzystne oddziaływania akustyczne na ludzi, na podstawie przeprowadzonych badań. W związku z dużą ilością celowych funduszy europejskich nastąpiła tendencja modernizacji istniejącej infrastruktury. W związku z tym poszukuje się rozwiązań trwałych i niezawodnych. Trwałe rozwiązania torowisk w infrastrukturze miejskiej są teraz dużym wyzwaniem dla inżynierów. Dotychczasowe badania wskazują, że najwyższą trwałość spośród nawierzchni drogowych w obrębie torowisk wykazuje kostka kamienna lub betonowa w połączeniu z nowoczesną systemową konstrukcją podbudowy.
Many years-neglects into the modernization of tramlines and the growth of intensity and the tonnage on the road caused the devastation of the existing communication infrastructure. Unfortunately disadvantageous influences of the tram-camp on the environment tie in with this also. To disadvantageous influences of the tramcamp we can count dynamic and acoustic influences. Especially troublesome are acoustic influences, because their zone of the influence is considerably greater than dynamic influences. In the article in detail will remain disadvantageous of acoustic influences on people, on the basis of carried out research. In connection with the European structural funds followed the tendency of the modernization of the existing infrastructure. Thereby durable and reliable solutions are seek. Durable solutions of track-ways in the urban infrastructure are now a large challenge for engineers.
Źródło:
Przegląd Budowlany; 2021, 92, 11-12; 103--109
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niekorzystne oddziaływania taboru szynowego w mieście
Disadvantageous influences of the rail camp in the city
Autorzy:
Błaszczyński, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2055966.pdf
Data publikacji:
2021
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
linia tramwajowa
Polska
historia
tabor szynowy
oddziaływanie dynamiczne
oddziaływanie akustyczne
hałas
pomiar akustyczny
poziom dźwięku
tło akustyczne
tram line
Polska
history
rolling stock
dynamic impact
acoustic impact
noise
acoustic measurement
sound level
acoustic background
Opis:
Wieloletnie zaniedbania w modernizację linii tramwajowych oraz wzrost natężenia i tonażu w ruchu drogowym spowodował dewastację istniejącej infrastruktury komunikacyjnej. Niestety wiążą się z tym również niekorzystne oddziaływania taboru tramwajowego na środowisko. Do niekorzystnych oddziaływań taboru tramwajowego możemy zaliczyć oddziaływania dynamiczne i akustyczne. Szczególnie dokuczliwe są wpływy akustyczne, gdyż ich strefa oddziaływania jest znacznie większa niż wpływów dynamicznych. W pracy zostaną szczegółowo przedstawione niekorzystne oddziaływania akustyczne na ludzi, na podstawie przeprowadzonych badań. W związku z dużą ilością celowych funduszy europejskich nastąpiła tendencja modernizacji istniejącej infrastruktury. W związku z tym poszukuje się rozwiązań trwałych i niezawodnych. Trwałe rozwiązania torowisk w infrastrukturze miejskiej są teraz dużym wyzwaniem dla inżynierów. Dotychczasowe badania wskazują, że najwyższą trwałość spośród nawierzchni drogowych w obrębie torowisk wykazuje kostka kamienna lub betonowa w połączeniu z nowoczesną systemową konstrukcją podbudowy.
Many years-neglects into the modernization of tramlines and the growth of intensity and the tonnage on the road caused the devastation of the existing communication infrastructure. Unfortunately disadvantageous influences of the tram-camp on the environment tie in with this also. To disadvantageous influences of the tramcamp we can count dynamic and acoustic influences. Especially troublesome are acoustic influences, because their zone of the influence is considerably greater than dynamic influences. In the article in detail will remain disadvantageous of acoustic influences on people, on the basis of carried out research. In connection with the European structural funds followed the tendency of the modernization of the existing infrastructure. Thereby durable and reliable solutions are seek. Durable solutions of track-ways in the urban infrastructure are now a large challenge for engineers.
Źródło:
Przegląd Budowlany; 2021, 92, 11-12; 103--109
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania modelu fragmentu systemu naczyń krwionośnych
Investigations of a model of the blood vessel part
Autorzy:
Bołtrukiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/154841.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
naczynia krwionośne
właściwości dynamiczne
transmitancja
odpowiedź skokowa
fala uderzeniowa
model fizyczny
blond vessel
dynamic specificity
transfer function
step response
impact wave
physical model
Opis:
Przedstawiona praca dotyczy modelowania właściwości dynamicznych systemu naczyń krwionośnych. W pracy wykorzystuje się uzyskaną eksperymentalnie transmitancję fragmentu systemu naczyń krwionośnych znajdującego się pomiędzy stawem łokciowym i nadgarstkiem. W artykule rozważa się dwa modele podatnej tętnicy, które są badane w aspekcie dopasowania do danych uzyskanych doświadczalnie. Do dalszych prac zostaje wybrany model charakteryzujący się dużym stopniem dopasowania do danych eksperymentalnych, uwzględniający rzeczywiste zachowanie cieczy w odkształconej podatnie tętnicy.
The paper concerns the modeling of dynamic specificity of blood vessel. The simple physical models of blood vessel part were investigated. In the experiments a PPG signal was used. The optoelectronic sensors were installed on a wrist and forearm. After the acquisition, the obtained samples of the PPG signal were identified by the RLS method. As a result of the experiments the transfer function of the investigated blood vessel part was obtained. This transmittance is described with Eq. (4), and its step response is shown in Fig. 2. In the work two physical models are considered. The structures of these models are shown in Figs.1 and 3. The first one uses the phenomenon of suppressed oscillations, while the second one - the phenomenon of impact of the liquid wave. The transfer functions of the models are described by Eqs. (6) and (13), respectively. In the study compatibility between the obtained transfer function and the physical models was verified. The transfer function of blood vessel and the transfer functions of physical models were compared. Their step responses were compared, too. Finally, the correspondence between the second physical model and the transmittance of the blood vessel part was experimentally proved.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 4, 4; 344-347
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental identification of the dynamic coefficients of two hydrodynamic journal bearings operating at constant rotational speed and under nonlinear conditions
Autorzy:
Breńkacz, Ł.
Żywica, G.
Drosińska-Komor, M.
Powiązania:
https://bibliotekanauki.pl/articles/259675.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
bearing dynamic coefficients
experimental research
nonlinear coefficients
impact excitation
hydrodynamic bearing
Opis:
Hydrodynamic bearings are commonly used in ship propulsion systems. Typically, they are calculated using numerical or experimental methods. This paper presents an experimental study through which it has been possible to estimate 24 dynamic coefficients of two hydrodynamic slide bearings operating under nonlinear conditions. During the investigation, bearing mass coefficients are identified by means of a newly developed algorithm. An impact hammer was used to excite vibration of the shaft. The approximation by means of the least squares method was applied to determine bearing dynamic coefficients. Based on the performed research, the four (i.e. two main and two crosscoupled) coefficients of stiffness, damping and mass for each bearing were obtained. The mass coefficients add up to the complex shaft weight. These values are not required for modeling dynamics of the machine because the rotor mass is usually known, however, they may serve as a good indicator to validate the correctness of the stiffness and damping coefficients determined. Additionally, the experimental research procedure was described. The signals of displacements in the bearings and the excitation forces used for determination of the bearing dynamic coefficients were shown. The study discussed in this article is about a rotor supported by two hydrodynamic bearings operating in a nonlinear manner. On the basis of computations, the results of bearing dynamic coefficients were presented for a selected speed.
Źródło:
Polish Maritime Research; 2017, 4; 108-115
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic splitting tensile performance of new and old concrete after high temperature treatment
Autorzy:
Cao, Hai
Powiązania:
https://bibliotekanauki.pl/articles/2033990.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton nowy
beton stary
SHPB
dynamic splitting tensile performance
prędkość uderzenia
temperatura
new concrete
old concrete
split Hopkinson pressure bar
impact velocity
temperature
Opis:
In order to study the dynamic splitting tensile properties of new and old concrete after high temperature treatment, the effects of different impact velocities and temperatures on failure modes, dynamic splitting strength and energy absorption of new and old concrete were analyzed by impact dynamic splitting tensile test use of variable cross-section Φ 74 mm split Hopkinson pressure bar apparatus. The results show that: Impact velocity and temperature not only affect the dynamic splitting strength of new and old concrete bonding specimens, but also affect the failure modes and degree of breakage. The dynamic splitting strength of new and old concrete increases with the increase of impact velocity, but the increase rate decreased with the increase of temperature. The dynamic splitting strength first increases slowly and then decreases dramatically with the increase of temperature. In the dynamic splitting test of new and old concrete, the energy absorption increases with the increase of impact velocity and decreases with the increase of temperature.
Źródło:
Archives of Civil Engineering; 2021, 67, 4; 79-89
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing 10GHMBA steel for vessel ballistic shields
Autorzy:
Charchalis, A.
Kyzioł, L.
Powiązania:
https://bibliotekanauki.pl/articles/247162.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bainitic steel
static properties
dynamic properties
high deformation speed
impact testing machine
Taylor's test
equipped ballistic pendulum
computer simulations
Opis:
This paper presents the methods of testing the materials subjected to static and dynamic tensile tests, presented for 10GHMBA - E620 bainitic steel. The tests were conducted on the MTS 810.12 universal strength testing machine, a rotary hammer, a station especially designed for the conditions required for the Taylor test, an equipped ballistic pendulum and high-speed digital camera Phantom v12. The data collected in the tests are necessary for strength calculations of these constructions. The calculations are performed with the use of numerical methods and computing techniques, including constitutive equations for the performance description of a given material. Specific parameters and material constant values for the missile and the shield are accounted for in the equations. The parameters and constant values are either determined in experiments or 'selected', which is a significant issue in the case of high deformation speed. The final section presents examples of numerical simulations which enable the analysis of quick change processes which occur when a construction is subjected to strains due to strike with an object moving at a high speed, such as a 12.7 mm calibre missile moving at approx. 1000 ms-1. The knowledge of mechanical properties of materials is crucial in designing constructions exposed to direct fire and other dynamic effects. The results are presented in the form of charts and graphs.
Źródło:
Journal of KONES; 2011, 18, 2; 69-75
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of crater creating process in dynamic replacement method by smooth particle hydrodynamics
Autorzy:
Danilewicz, A.
Sikora, Z.
Powiązania:
https://bibliotekanauki.pl/articles/178657.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dynamic replacement method
SPH
impact soil
Opis:
A theoretical base of SPH method, including the governing equations, discussion of importance of the smoothing function length, contact formulation, boundary treatment and finally utilization in hydrocode simulations are presented. An application of SPH to a real case of large penetrations (crater creating) into the soil caused by falling mass in Dynamic Replacement Method is discussed. An influence of particles spacing on method accuracy is presented. An example calculated by LS-DYNA software is discussed. Chronological development of Smooth Particle Hydrodynamics is presented. Theoretical basics of SPH method stability and consistency in SPH formulation, artificial viscosity and boundary treatment are discussed. Time integration techniques with stability conditions, SPH+FEM coupling, constitutive equation and equation of state (EOS) are presented as well.
Źródło:
Studia Geotechnica et Mechanica; 2014, 36, 3; 3-8
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uwzględnienie oddziaływań dynamicznych na konstrukcję trybun
Inclusion of dynamic impacts on the stand structure
Autorzy:
Drzazga, M.
Powiązania:
https://bibliotekanauki.pl/articles/162898.pdf
Data publikacji:
2013
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
stadion
trybuna
rozwiązanie konstrukcyjne
oddziaływanie dynamiczne
drganie
rezonans
tłumienie
stadium
stand
structural solution
dynamic impact
vibration
resonance
damping
Opis:
Artykuł ma na celu zbadanie problemu drgań konstrukcji trybun oraz zobrazowanie toku postępowania w przypadku analizy oddziaływań podczas projektowania trybun stadionów narażonych na wpływy dynamiczne generowane przez ruch tłumu.
This article is aimed at the examination of the problem of stand structure vibration, as well as the presentation of the procedure for the analysis of interactions in the course of design of the stands of stadiums, exposed to the dynamic impacts, generated by the movement of the crowd.
Źródło:
Przegląd Budowlany; 2013, R. 84, nr 12, 12; 40-45
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacyjne modele formowania opinii w sieciach społecznych
Simulation of opinion model in social network
Autorzy:
Dzida, D.
Powiązania:
https://bibliotekanauki.pl/articles/404113.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
model dynamiczny
model wpływów społecznych
sieć społeczna
symulacja
mikrosymulacja
dynamic model
model of social impact
social network
simulation
microsimulation
Opis:
W pracy przedstawiono dynamiczny model wpływów społecznych oraz wyniki symulacji z zastosowaniem sieci społecznych. Omówiono sposób modelowania zjawisk społecznych oraz zastosowanie mikrosymulacji do badania modelu. Dla rozważanego modelu opisano istotne cechy agentów oraz regułę zmiany stanu agenta. Przedstawiono wybrane wyniki badań nad modelem oraz ich interpretacje.
In this paper dynamic model of social impact is presented. The modeling of social phenomena and the use of micro simulation are discussed. The agent based modeling is applied to construct model and perform simulation. The agent's features and rule of changed her state are described. The results of simulation of model using social network are shown and interpreted.
Źródło:
Symulacja w Badaniach i Rozwoju; 2011, 2, 3; 137-147
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie techniki wideo do pomiaru okresu drgań własnych kominów
The use of video technology for measuring the period of oscillation own chimneys
Autorzy:
Gałek, P.
Powiązania:
https://bibliotekanauki.pl/articles/163311.pdf
Data publikacji:
2015
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja smukła
oddziaływanie dynamiczne
komin przemysłowy
okres drgań własnych
przemieszczenie
technika pomiaru
technika wideo
slender structure
dynamic impact
industrial chimney
own oscillation period
displacement
measurement technique
video technique
Opis:
W obliczeniach projektowych lub badaniach stanu technicznego konstrukcji narażonych na oddziaływania dynamiczne potrzebna jest znajomość ich właściwości dynamicznych. Konstrukcjami szczególnie narażonymi na ciągłe wpływy dynamiczne są konstrukcje wieżowe oraz mosty. Z uwagi na często utrudniony dostęp szczególnego znaczenia nabierają metody pomiaru aparaturą zlokalizowaną poza obiektem. W artykule zaproponowano metodę pomiaru okresu drgań własnych za pomocą techniki wideo. Przedmiotem badania był komin żelbetowy w Elektrociepłowni Kraków-Łęg o wysokości 260 m. Wyniki porównano z wartościami otrzymanymi innymi metodami.
When performing design computations and testing technical conditions of structures exposed to dynamic loads, it is necessary to know their dynamic properties. In particular, towers and bridges are continuously subject to dynamic loads. Given that access is often difficult, preferred methods of measurement should not require installation of any devices on the structure itself. This paper proposes a method for measuring a natural vibration period by means of video recording. The object of the study was a reinforced concrete chimney in Kraków-Łęg Power Plant with a height of 260 m. The results were compared with values obtained by other methods.
Źródło:
Przegląd Budowlany; 2015, R. 86, nr 6, 6; 29-31
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation on using the falling mass technique for dynamic force calibrations
Autorzy:
Gelany, Shaker A.
Mahmoud, Gouda M.
Powiązania:
https://bibliotekanauki.pl/articles/1849008.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
calibration
dynamic calibration
impact force
falling weight
Opis:
In this paper, we present an experimental setup developed for the calibration of dynamic force transducers which is based on the drop mass method. The traceability to SI units is realized through well-known mass characteristics and a reference shock accelerometer attached to that mass. Two approaches are proposed to analyse dynamic force employing a drop mass system. One approach depends on the inertial force of a falling mass while the other deals with the work-energy principle. Results of both approaches are then compared to the response of a statically calibrated force transducer. It is shown that the obtained maximum relative deviations between the response of force transducer and the first approach results are 1% while those of the second approach are 2%.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 455-463
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation on using the falling mass technique for dynamic force calibrations
Autorzy:
Gelany, Shaker A.
Mahmoud, Gouda M.
Powiązania:
https://bibliotekanauki.pl/articles/1849097.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
calibration
dynamic calibration
impact force
falling weight
Opis:
In this paper, we present an experimental setup developed for the calibration of dynamic force transducers which is based on the drop mass method. The traceability to SI units is realized through well-known mass characteristics and a reference shock accelerometer attached to that mass. Two approaches are proposed to analyse dynamic force employing a drop mass system. One approach depends on the inertial force of a falling mass while the other deals with the work-energy principle. Results of both approaches are then compared to the response of a statically calibrated force transducer. It is shown that the obtained maximum relative deviations between the response of force transducer and the first approach results are 1% while those of the second approach are 2%.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 455-463
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation on using the falling mass technique for dynamic force calibrations
Autorzy:
Gelany, Shaker A.
Mahmoud, Gouda M.
Powiązania:
https://bibliotekanauki.pl/articles/1849140.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
calibration
dynamic calibration
impact force
falling weight
Opis:
In this paper, we present an experimental setup developed for the calibration of dynamic force transducers which is based on the drop mass method. The traceability to SI units is realized through well-known mass characteristics and a reference shock accelerometer attached to that mass. Two approaches are proposed to analyse dynamic force employing a drop mass system. One approach depends on the inertial force of a falling mass while the other deals with the work-energy principle. Results of both approaches are then compared to the response of a statically calibrated force transducer. It is shown that the obtained maximum relative deviations between the response of force transducer and the first approach results are 1% while those of the second approach are 2%.
Źródło:
Metrology and Measurement Systems; 2021, 28, 3; 455-463
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies