Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "displacement measurement" wg kryterium: Temat


Wyświetlanie 1-28 z 28
Tytuł:
Modernising the control network for determining displacements in hydraulic structures using automatic measurement techniques
Autorzy:
Zaczek-Peplinska, Janina
Saloni, Lech
Powiązania:
https://bibliotekanauki.pl/articles/28411637.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
automatic measurement
control network
dams
engineering geodesy
geodetic displacement measurement
LiDAR
Opis:
Over the last two decades, geodetic surveying has seen significant advancements with terrestrial and unmanned aerial vehicle (UAV) laser scanning, alongside automatic observations being increasingly utilised throughout the construction process. In the context of dam structures, periodic geodetic displacement measurements are a compulsory component of control measurements and safety assessments. In Poland, however, control measurements have largely remained rooted in traditional techniques such as classic linear and angular measurements and precise levelling. These methods are typically carried out within distinct control networks, i.e. without dual-function observation points and targets. Furthermore, network points (pillars, targets) have often not been renewed since their installation several decades ago, and glass discs, used for crown measurements in the baseline method, frequently face damage. Changes in property ownership and modifications in environmental regulations are compounded by these issues, which often impede the proper upkeep of the sight line. The article proposes the adaptation and reconstruction of control networks to incorporate automatic observation techniques, including linear and angular measurements. This approach includes activities aimed at reconstructing and supplementing damaged network structures, modernising the geodetic process of determining structure displacements, and enhancing the accuracy, credibility, and reliability of geodetic displacement measurement results. The article presents the findings of an inventory assessment conducted on the existing control network infrastructure, focusing on the analysis of displacements for structures with diverse constructions and functions - a concrete dam (class I) and a water damming weir with a water intake. Furthermore, it presents practical conclusions regarding the efficient organisation of geodetic control measurements.
Źródło:
Journal of Water and Land Development; 2023, 59; 66--75
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Steel telecommunication tower displacement studies
Autorzy:
Ochab, Piotr
Gardzińska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/2065744.pdf
Data publikacji:
2019
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
tower structure
displacement measurement
wieża telekomunikacyjna
konstrukcja wieży
pomiar przemieszczeń
Opis:
The study of displacements of engineering structures using geodetic methods consists in determining the displacements of the structure in relation to the adopted reference system or in determining the geometry of individual structural elements or the entire structure. The geometry of tower objects is measured cyclically. In the case of telecommunications towers, the most common geometry research is the deviation of the tower axis and the turning angles of the tower at its individual levels. The article presents the methodology and results of the telecommunications tower geometry research obtained for a steel three-legged tower with a height of H = 32.11m. It is a steel tower with a typical structure. The structure in the projection is described on the plan of an equilateral triangle. In the corners of the tower there are curbs in the form of solid round bars. Angular observations were made in two positions of the telescope to selected points on the legs of the tower. The heights of the points on the foundations of the tower were obtained from measurements using the geometric leveling method. The heights of the points at each level of connecting the segments were determined by the trigonometric leveling method based on the measured zenith angles. The measurement points were related to the geometric axes of the tower legs at the connection points of individual segments. The tower displacement parameters were determined from geodetic measurements with the Theo010A theodolite.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2019, 66, 4; 29--36
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Steel telecommunication tower displacement studies
Autorzy:
Ochab, Piotr
Gardzińska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/104771.pdf
Data publikacji:
2019
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
tower structure
displacement measurement
wieża telekomunikacyjna
konstrukcja wieży
pomiar przemieszczeń
Opis:
The study of displacements of engineering structures using geodetic methods consists in determining the displacements of the structure in relation to the adopted reference system or in determining the geometry of individual structural elements or the entire structure. The geometry of tower objects is measured cyclically. In the case of telecommunications towers, the most common geometry research is the deviation of the tower axis and the turning angles of the tower at its individual levels. The article presents the methodology and results of the telecommunications tower geometry research obtained for a steel three-legged tower with a height of H = 32.11m. It is a steel tower with a typical structure. The structure in the projection is described on the plan of an equilateral triangle. In the corners of the tower there are curbs in the form of solid round bars. Angular observations were made in two positions of the telescope to selected points on the legs of the tower. The heights of the points on the foundations of the tower were obtained from measurements using the geometric leveling method. The heights of the points at each level of connecting the segments were determined by the trigonometric leveling method based on the measured zenith angles. The measurement points were related to the geometric axes of the tower legs at the connection points of individual segments. The tower displacement parameters were determined from geodetic measurements with the Theo010A theodolite.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2019, 66, 4; 29-36
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geodetic monitoring of geotechnical structures displacements: a case study of Radiowo landfill site in Warsaw
Geodezyjny monitoring przemieszczeń obiektów geotechnicznych na przykładzie składowiska odpadów Radiowo w Warszawie
Autorzy:
Pasternak, G.
Powiązania:
https://bibliotekanauki.pl/articles/28766351.pdf
Data publikacji:
2022
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
Warsaw city
landfill
geodetic monitoring
geotechnics
laser scanning
photogrammetry
displacement measurement
case study
Źródło:
Acta Scientiarum Polonorum. Architectura; 2022, 21, 2; 75-83
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania porównawcze przyspieszeń i przemieszczeń konstrukcji mostowych pod próbnym obciążeniem dynamicznym
Comparative tests of bridge structures accelerations and deflections under proof dynamic load
Autorzy:
Olaszek, P.
Janas, L.
Salamak, M.
Matysek, A.
Powiązania:
https://bibliotekanauki.pl/articles/144585.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
konstrukcje mostowe
badania dynamiczne
pomiar przyspieszeń
pomiar przemieszczeń
bridge structures
dynamic tests
acceleration measurement
displacement measurement
Opis:
Zbadano możliwość porównywania wyników pomiarów wykonywanych różnym sprzętem przez cztery laboratoria. Zaprezentowano metody pomiaru przemieszczeń zapewniające dużą zgodność wyników. Zwrócono uwagę na znaczenie filtracji przy pomiarach przyspieszeń. Wartości przyspieszeń bez informacji o zastosowanej filtracji lub o rejestrowanym widmie częstotliwości mają małą wartość porównawczą. Dotyczy to nie tylko porównywania wyników pomiarów, ale i porównywania ich z wynikami obliczeń.
Comparison of measurement results possibility using different devices by four laboratories was tested. Measurement of displacement methods providing high results compatibility was presented. One paid attention on importance of filtering during acceleration measurements. Values of acceleration without information of used filtering or of frequency spectrum registered have small comparative value. It concerns not only measurement results comparison but also their comparison with theoretical results.
Źródło:
Drogownictwo; 2014, 10; 339-343
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pomiar przemieszczenia liniowego z zastosowaniem inducyjnościowego przetwornika transformatorowego oraz dyskretnego przekształcenia Fouriera.
Measurment of displacement using Linear Variable Differential Transformer ( LVDV ) and Discrete Fourier Transform
Autorzy:
Rybski, R.
Krajewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/155258.pdf
Data publikacji:
2003
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiar przemieszczenia
przetwornik transformatorowy
dyskretne przekształcenie Fouriera
displacement measurement
differential transformer
discrete Fourier transform
Opis:
W artykule przedstawiono sposób wykorzystywania uniwersalnej karty akwizycji danych oraz algorytmu opartego na dyskretnym przekształceniu Fouriera, do przetwarzania sygnału wejściowego transformatorowego przerwornika przemieszczenia liniowego. Przeprowadzono badania symulacyjne mające na celu określenie najlepszych warunków próbkowania. Wyniki pomiarów uzyskane tą metodą zostały porównane z wynikami otrzymanymi z zastosowaniem innych metod.
The linear variable differential transformers still find many applications, mainly in the industry. New measuring techniques based on Discrete Fourier Transform (DFT) makes a new possibility of precisions processing of the transducers signals. In this paper, a system based on DFT, where LVDT is suplied by autonomic, sine waive generator and the input and outpud voltages are processed to digital foms by commericial, universal acquisition data card (fig. 2) is analysed. Simulations werw used to analyse influence of the lenght of the rectangular window, spectral laekage on accuracy of determining amplitudes of processed signals. Experimental analyses were also made for proposed measuring system. Measuring results have been compared whith anothers ones, acquried in two digital voltometers circuit and an analogue conditioner AD 698 ( fig. 5).
Źródło:
Pomiary Automatyka Kontrola; 2003, R. 49, nr 6, 6; 15-18
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda ortogonalna pomiaru przemieszczeń szyn w diagnostyce toru bezstykowego
Orthogonal method of rail displacement measurement in contactless track diagnostics
Autorzy:
Jamka, M.
Stoliński, M.
Lisowski, S.
Powiązania:
https://bibliotekanauki.pl/articles/248166.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
tor bezstykowy
temperatura neutralna
pomiar przemieszczeń
punkty stałe
contactless track
neutral temperature
displacement measurement
fixed points
Opis:
Lokalne przemieszczenia wzdłużne szyn, mogą zaburzyć stabilności temperatury neutralnej w szynach toru bezstykowego. Pomiar przemieszczeń oznaczonych na szynie punktów bazowych w stosunku do punktów stałych, jest obecnie jedyną metodą stosowaną na sieci PKP, która pozwala na okresową kontrolę temperatury neutralnej. W artykule przedstawione zostanie nowe urządzenie i metoda pomiaru przemieszczeń punktów bazowych w stosunku do punktów stałych w aspekcie współczesnych technologii prowadzenia pomiarów przemieszczeń.
Local longitudinal displacement of the rails may disturb the stability of the neutral temperature in the contactless rails. The measurement of displacements of the base points marked on rail in relation to fixed points is currently the only one method used on the PKP network, which allows for periodic control of the neutral temperature. A new device and a method for measuring displacements of base points in relation to fixed points in the aspect of modern technologies for conducting displacement measurements have been presented in the paper.
Źródło:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne; 2018, 1(115); 47-58
1231-9171
Pojawia się w:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie inklinometrów w monitoringu konstrukcji
Application of inclinometers in structure monitoring
Autorzy:
Wierzbicki, S.
Pióro, Z.
Osiniak, M.
Antoszkiewicz, E.
Powiązania:
https://bibliotekanauki.pl/articles/105358.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
monitoring konstrukcji
pomiar przemieszczeń
pomiar kątów
inklinometr MEMS
system bezprzewodowy
structure monitoring
displacement measurement
angle measurement
MEMS inclinometer
wireless system
Opis:
W pracy omówiono zagadnienie pomiaru lokalnych zmian kątów obrotu elementów konstrukcji, jako metody monitorowania zachowania się ustroju konstrukcyjnego. Celem prowadzonych badań i analiz jest opracowanie metody pomiarów, która mogłaby zostać wykorzystana w systemach monitoringu konstrukcji, jako alternatywa dla tradycyjnego pomiaru przemieszczeń realizowanego dalmierzami laserowymi. Zaproponowano wykorzystanie inklinometrów z czujnikami MEMS, charakteryzującymi się dobrymi właściwościami metrologicznymi przy akceptowalnych kosztach. Przeanalizowano zalety i ograniczenia tej metody w relacji do alternatywnego pomiaru przemieszczeń dalmierzami laserowymi. Omówiono możliwości zastosowania inklinometrów do monitorowania typowych ustrojów konstrukcyjnych, a także przedstawiono przykład systemu monitoringu technicznego wykorzystującego taką metodę pomiaru.
The paper discusses the problem of measuring local changes of rotation angles of structural elements as a method of monitoring the behavior of structure. The purpose of the research and analysis is to develop a measurement method that could be used in structure monitoring systems as an alternative to conventional laser distance measurement. Inclinometers with MEMS sensors having good metrological properties at acceptable costs, were proposed. The advantages and limitations of this method have been analyzed in relation to the alternative measurement of displacement with laser rangefinders. The possibility of using inclinometers to monitor of typical structures is discussed, as well as an example of a technical monitoring system using such a measurement method.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 3/I; 547-558
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie obliczonych i pomierzonych techniką GPS charakterystyk dynamicznych komina przemysłowego
Comparison of computed and measured dynamic characteristics of industrial chimney by GPS technology
Autorzy:
Chmielewski, T.
Górski, P.
Breuer, P.
Konopka, E.
Powiązania:
https://bibliotekanauki.pl/articles/389954.pdf
Data publikacji:
2014
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
komin przemysłowy
zagadnienie własne
pomiary przemieszczeń
GPS
charakterystyki dynamiczne
industrial chimney
free vibrations
displacement measurement
dynamic characteristics
Opis:
Celem badań było porównanie wyników obliczeń postaci i częstości drgań własnych komina przemysłowego nr 1 Elektrowni Bełchatów, z uwzględnieniem i bez uwzględnienia podatności podłoża gruntowego, z wynikami badań eksperymentalnych tych wielkości wykonanych w czasie dwóch sesji pomiarowych w dniach 1-3.12.2008r. i 20-24.05.2011r. Trzy anteny typu „rover” rozmieszczono na trzech różnych wysokościach po zewnętrznej stronie komina. Pomierzone przemieszczenia wywołane wpływem wiatru pozwoliły na określenie tylko podstawowej postaci i częstości drgań własnych, współczynników tłumienia i maksymalnych przemieszczeń, dla określenia których zastosowano proces filtracji. Wielkości pomierzone są ważne w ocenie stanu technicznego komina. Uzyskano dobrą zgodność wyników obliczeń i wyników uzyskanych doświadczalnie dla pierwszej postaci i częstości drgań własnych.
In the paper, the theoretical natural vibration frequencies and mode shapes of the chimney with and without the flexibility of soil were compared with the experimental results of two field tests carried out in December 2008 and in May 2011 by using GPS technology. Three GPS rover receivers were installed at three various levels. The GPS was able to measure only the first natural frequencies and mode shapes of the chimney. The damping ratios and maximum displacements of the chimney using the band-pass filtering technique for both tests were also determined. The measured dynamic characteristics are important for the assessment of the technical state of the chimney. The estimated dynamic characteristics, using GPS measurements, are compatible with the computed results.
Źródło:
Budownictwo i Architektura; 2014, 13, 2; 173-181
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza krzywizny toru kolejowego w aspekcie wymuszonych przemieszczeń poprzecznych
Analysis of the railway track curvature in the aspect of forced lateral displacements
Autorzy:
Wilk, A.
Chrostowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/248810.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
tor kolejowy
pomiar przemieszczeń poprzecznych
analiza obrazu
identyfikacja kształtu
railway track
lateral displacement measurement
image analysis
shape identification
Opis:
Artykuł dotyczy zagadnienia identyfikacji zmian kształtu toru występujących w procesie wymuszonych przemieszczeń poprzecznych. Wymuszenia takie mają miejsce w regulacji geometrycznej osi toru podczas pracy podbijarki. W pracy przedstawiono założenia do opracowywanej metody ciągłego pomiaru wymuszonych przemieszczeń poprzecznych rusztu torowego. Zaprezentowany został program komputerowy realizujący proces identyfikacji obrazu oraz założenia do metodyki określania modelu teoretycznego powstałej deformacji geometrycznej. Autorzy nawiązali do wykonywanych przez nich prac badawczych, których celem było wykazanie zależności pomiędzy postacią deformacji wynikającej z pracy podbijarki a siłą osiową występującą w tokach szynowych toru bezstykowego.
The paper presents a problem of a track shape identification, when the changes have a dynamic character and oceur in the process of forced lateral displacement. Such displacements oceur in a process of geometrical adjustment of the track longitudinal axis during the track's tamping. The authors discuss the main assumptions of the method of the continuous measurements of lateral rail’s dislocations. The computer program that identifies a rail image on a digital picture as well as creates a theoretical model of the rail axis has been presented. The authors refer to their previous researches when the aim was to investigate the relationship between the shape of the deformed rail as a result of the work of tamping machine and the axial force that exists in the rails of CWR tracks.
Źródło:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne; 2013, 3(102); 411-421
1231-9171
Pojawia się w:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measuring displacements in engineering structures by means of a coordinate laser station
Badanie przemieszczeń obiektów inżynierskich z wykorzystaniem stacji laserowej
Autorzy:
Sztubecki, J.
Bujarkiewicz, A.
Sztubecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/396253.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
displacement measurement
laser station
engineering structures
dynamic response
bridge structures
pomiar przemieszczeń
stacja laserowa
monitorowanie obiektów inżynierskich
dynamika konstrukcji
konstrukcje mostowe
Opis:
The application of geodetic methods to examine structures consists in the determination of their displacements relative to an established geodetic reference datum or in the definition of the geometry of their individual components. Such examinations form a picture of changes happening between specific points in time. Modern measurement technologies used in geodetic engineering enable undertaking more and more challenging measurements with increasing accuracy. The purpose of this article is to present a measurement technique involving a Leica TDRA 6000 total station to measure displacements in engineering structures. The station features a direct drive technology to achieve an accuracy of 0.25 mm in 3-dimensional measurements. Supported by appropriate software, the unit makes a perfect instrument for the monitoring of civil engineering structures. The article presents the results of measurement of static and dynamic displacements in a few engineering structures. The measurements were carried out both in laboratory conditions and on actual, operated civil engineering structures.
Badania konstrukcji metodami geodezyjnymi polegają na wyznaczeniu jej przemieszczeń względem przyjętego układu odniesienia lub na określeniu geometrii poszczególnych elementów. Dają one obraz zmian pomiędzy przyjętymi momentami czasu. Nowoczesne technologie pomiarowe stosowane w geodezji pozwalają na realizowanie coraz bardziej skomplikowanych zadań pomiarowych oraz uzyskiwanie coraz większych dokładności. Celem artykułu jest przedstawienie technologii pomiaru przemieszczeń konstrukcji inżynierskich z wykorzystaniem stacji laserowej Leica TDRA 6000. Stacja ta wyposażona jest w technologię napędu bezpośredniego, pozwalającą na uzyskiwanie dokładności pomiaru 3D na poziomie 0,25 mm. Wraz z odpowiednim oprogramowaniem jest doskonałym narzędziem umożliwiającym monitorowanie obiektów inżynierskich. Zaprezentowano wyniki pomiarów przemieszczeń statycznych oraz dynamicznych kilku konstrukcji inżynierskich. Pomiary wykonywano zarówno w warunkach laboratoryjnych jaki na istniejących i eksploatowanych obiektach.
Źródło:
Civil and Environmental Engineering Reports; 2016, No. 23(4); 145-160
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synchronous Measurement of Out-of-Plane Displacement and Slopes by Triple-Optical-Path Digital Speckle Pattern Interferometry
Autorzy:
Gu, G.-Q.
Xu, G.-Z.
Xu, B.
Powiązania:
https://bibliotekanauki.pl/articles/220423.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
simultaneous displacement and slopes measurement
non-destructive testing
digital speckle pattern interferometry
shearography
triple-optical-path
Opis:
This study proposes a triple-optical-path digital speckle pattern interferometry (DSPI) setup for measuring the full-field out-of-plane displacement and two orthogonal slopes simultaneously as well as independently. The designed setup contains one conventional out-of-plane speckle interferometer and two orthogonal modified shearographic interferometers with dual-observation geometry. In the setup, one laser device is used as the coherent source, and three monochrome cameras placed along a single line are used as the image acquisition device. Three correlation fringe patterns, one out-of-plane displacement fringe pattern and two slope fringe patterns, are captured synchronously by three cameras, and then are analysed using the phase-shifting technique to extract the phase distributions. The examinations of a practical non-contact measurement and a non-destructive testing (NDT) application by using the proposed setup are carried out in this study.
Źródło:
Metrology and Measurement Systems; 2018, 25, 1; 3-14
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda fotogrametryczna w ocenie przemieszczeń konstrukcji wielkogabarytowych - na przykładzie silosu zbożowego
The application of photogrammetric method in the test of displacemment of large structures - for example grain silo
Autorzy:
Kromulski, Jacek
Mac, Jarosław
Grzechowiak, Ryszard
Powiązania:
https://bibliotekanauki.pl/articles/884480.pdf
Data publikacji:
2019-04-30
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
fotogrametria
zastosowanie
silosy zbozowe
przemieszczenia
pomiary fotogrametryczne
photogrammetry
measurement of displacement
food storage
grain silos
Opis:
W artykule przedstawiono zastosowanie metody fotogrametrycznej w badaniach silosów służących do przechowywania ziarna. Omówiono kolejność czynności wykonywanych podczas badań przemieszczeń. Do badań zastosowano oprogramowanie Photo Modeler Scanner. Wyniki zmierzonych przemieszczeń poszycia silosu obciążonego ziarnem porównano z wynikami symulacji komputerowych przeprowadzonych metodami elementów skończonych (MES). Przemieszczenia uzyskane obu metodami są podobne.
The article presents the application of photogrammetric method in the study of silos designed to store grain. Discusses the sequence of activities performed during testing movements. In the study the PhotoModeler Scanner software was used. The results of the measured displacements of the shell loaded with grain silo were compared with the results of computer simulations performed finite element method (FEM). Displacements obtained by both methods are similar.
Źródło:
Technika Rolnicza Ogrodnicza Leśna; 2019, 2; 21-23
1732-1719
2719-4221
Pojawia się w:
Technika Rolnicza Ogrodnicza Leśna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermo-elastic structural analysis of a machine tool using a multi-channel absolute laser interferometer
Autorzy:
Deutsch, Jessica
Albrecht, Tom
Riedel, Mirko
Penter, Lars
Wiemer, Hajo
Müller, Jens
Ihlenfeldt, Steffen
Powiązania:
https://bibliotekanauki.pl/articles/99833.pdf
Data publikacji:
2020
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
temperature
measurement
deformation
displacement
Opis:
One of the main errors in the machining accuracy of machine tools is the displacement through thermal induced deformation. Modern design and construction methods aim to optimize the heat flow in the machine to achieve minimum displacement. To enable a further improvement it is essential to know the displacement state of the complete machine structure. However, most measurement methods that are used to capture the influence of a thermal load only measure the displacement of the TCP or individual axes. This paper presents a methodology to capture the complex spatial displacement condition of a state of the art machine tool in one measuring cycle using a multichannel laser interferometer. It describes the development of the measurement model as well as the measurement setup in the workspace of the machine. With measurements according to the presented procedure, it is possible to uncover weak points in the structure of a machine tool and to derive warm-up and cooling strategies.
Źródło:
Journal of Machine Engineering; 2020, 20, 3; 63-75
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena procesów osuwiskowych na podstawie wyników pomiarów inklinometrycznych
Appraisal of landslide processes based on the results of inclinometric measurements
Autorzy:
Zabuski, L.
Powiązania:
https://bibliotekanauki.pl/articles/2075058.pdf
Data publikacji:
2013
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
landslide
inclinometric measurement
displacement
osuwisko
pomiar inklinometryczny
przemieszczenie
Opis:
The paper presents the principles of the inclinometric method in the measurements of underground displacements of slopes are described and some example results. The advantages of the method and the practical examples are shown: results of the measurements on the slopes in the flysch Carpathians and Polish Lowland - i.e. in the Beskid Niski Mts., Beskid Ma³y Mts. and in Koronowo near Bydgoszcz. The capabilities of the method are described in detail. These include determination of the depth of the landslide slip surface or zone, description of the slide mechanism (rotational or translational), estimation of displacement rate and its connection with the external conditions, and determination of the movement direction.
Źródło:
Przegląd Geologiczny; 2013, 61, 4; 248--256
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A method of measuring moving element displacements in micro-hydraulic valves with the use of optical fibers
Autorzy:
Łomotowski, G.
Bereś-Pawlik, E.
Powiązania:
https://bibliotekanauki.pl/articles/280742.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
microhydraulics
micro valves
fiber optic
displacement
vibration
measurement
Opis:
This work presents a fiberoptic technique used to measure displacements of moving elements in micro-hydraulic valves. Fiberoptic sensors coupled with a reflection method have proven to be perfect for touchless measurement of movement for elements hard to measure by other methods due to their small size and presence of a hydraulic oil. The article presents results of experiments revealing correlation between the measurement signal and element movement as well as sample displacement changes in time of the moving element in non-equilibrium states – for both, a stable action and self-exciting vibrations of the element.
Źródło:
Journal of Theoretical and Applied Mechanics; 2014, 52, 3; 781-791
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Depth-resolved measurement of the compression displacement fields on the front and rear surfaces of an epoxy sample
Autorzy:
Zhang, W.
Dong, B.
He, Z.
Xie, S.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/174399.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
depth-resolved measurement
compression displacement field
wavenumber-scanning interferometry
epoxy
Opis:
Compression is one of the typical parameters measured in material mechanics. In this research, the compression displacement fields on the front and rear surfaces of an epoxy sample are measured by using a tilt depth-resolved wavenumber-scanning Michelson interferometer. The light source is a distributed feedback laser diode, the wavenumber of which can be modulated to about 1.017 × 104 m–1 by the temperature without mode hopping. A random-sampling Fourier transform is designed to evaluate the phase differences before and after the applied loads. Experimental results show that the depth-resolved measurement of the compression displacement field is of high accuracy. It can be used to analyze force propagation inside resin-based composites.
Źródło:
Optica Applicata; 2018, 48, 2; 311-323
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of Membrane Displacement with a Motionless Camera Equipped with a Fixed Focus Lens
Autorzy:
Murawski, K.
Powiązania:
https://bibliotekanauki.pl/articles/221372.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
measurement based on fuzzy signal
diaphragm displacement
image processing
motion sensor
Opis:
The paper presents a technique for measuring membrane displacements with one motionless camera. The method consists in measuring the distance to an object based on one image obtained from a motionless camera with a fixed-focus lens. The essence of the proposed measurement technique is to determine changes of the distance between a membrane and a video camera based on analysis of changes in the focus view of a marker placed on the membrane plane. It is proven that the used technique allows to monitor the frequency and amplitude of the membrane vibration. The tests were performed for the oscillation frequency in the range from 0.5 Hz to 6 Hz and deviations from the neutral position in the range of ±3 mm.
Źródło:
Metrology and Measurement Systems; 2015, 22, 1; 69-78
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Proposal for the technology of surveying works related to the study of deformation and displacement fresh steam pipeline to a boiler
Badanie odkształceń i przemieszczeń rurociągu pary świeżej kotła parowego
Autorzy:
Buśko, M.
Krzyżek, R.
Powiązania:
https://bibliotekanauki.pl/articles/385338.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
przemieszczenia
odkształcenia
punkty kontrolne
pomiar rurociągu
displacement
deformation
test point
pipeline measurement
Opis:
The present paper describes the process of determining deformation and displacement of fresh steam pipeline to a boiler. Subject of the measurements was the pipeline located on several stores. Therefore, particular attention was drawn to determining the location of the test points of the pipeline and difficulties involved proper selection of the reference system and height system.
W artykule omówiono proces wyznaczania odkształceń i przemieszczeń rurociągu pary świeżej kotła parowego. Przedmiotem pomiaru był rurociąg zlokalizowany na kilku kondygnacjach. W związku z tym szczególną uwagę zwrócono na określenie położenia punktów kontrolnych oraz właściwy dobór układu odniesienia i osnowy geodezyjnej.
Źródło:
Geomatics and Environmental Engineering; 2010, 4, 2; 23-32
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deformation measurement system for UAV components to improve their safe operation
Autorzy:
Czyż, Zbigniew
Jakubczak, Patryk
Podolak, Piotr
Skiba, Krzysztof
Karpiński, Paweł
Droździel-Jurkiewicz, Magda
Wendeker, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/28328271.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
strength tests
deformation measurement
optical displacement
deformation analysis
digital image correlation
UAV
Opis:
The paper presents the authors’ method and test rig for performing the deformation analysis of unmanned aircraft fuselages. To conduct the analysis, the DIC system was used, as well as a test rig designed and constructed by the authors, equipped with a dedicated control and load control system. The article presents a description of the research capabilities of the test rig developed for testing the deformation of unmanned aircraft fuselages. Due to the specific operating conditions of the designed fuselage,the test rig developed allows the simulation of loads corresponding to different flight conditions. In addition, it is possible to change the forces acting on the fuselage simultaneously for all servos or each of them separately. Finally, results showing the displacement of component control points for the considered fuselage versions are presented. The tests carried out using the developed test rig allowed the verification of the maximum deformations. The two versions of the composite fuselage of an aerial vehicle have been compared in the paper. The created measurement system and performed analyzes have enabled us to identify and quantitatively analyze the weaknesses of the construction. The results have enabled us to geometrically modify the constructionso the mass of the fuselage reduced by 19% and a coefficient of construction balance increased by 22%.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 4; art. no. 172358
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zapewnienie stabilności pomiarów kontaktowych w systemie automatycznego sterowania precyzyjnym szlifowaniem
Ensuring the stability of contact measurements in automated control systems for precision grinding
Autorzy:
Sholom, P.
Powiązania:
https://bibliotekanauki.pl/articles/952708.pdf
Data publikacji:
2015
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
pomiar
mechanizm przemieszczenia
odkształcenie
przemieszczenie
dokładność
measurement
transfer shift
deformation
displacement
accuracy
Opis:
Kontrola rozmiarów przedmiotów podczas ich obróbki na szlifierkach odbywa się za pomocą głowic pomiarowych ze specjalnym osprzętem, który znajduje się w mechanicznym kontakcie z kontrolowaną powierzchnią. Pomiar jest wykonywany w trybie automatycznym, dlatego ważne wyzwanie techniczne polega na tym, aby zapewnić wysoką dokładność śledzenia aktualnej wartości parametru kontrolnego. Rozpatrzono przyczyny występowania błędów pomiarowych. W artykule zostały przeanalizowane praktyczne układy kontroli przy szlifowaniu kształtów cylindrycznych oraz sytuacje, które mogą prowadzić do błędów temperaturowych lub jakości pozycjonowania osprzętu na powierzchni kontrolnej.
Control the size of the parts in the process of their processing on the grinding machine is performed using the measuring heads with a special equipment that mechanically is in contact with the surface of the control. The measurement is performed in the automatic mode that is why an important technical task is to ensure the high precision tracking of the current value of the control parameter. The causes of errors of measurement are analysed in the article. The article analyses the practical schemes of control on operations of round grinding, and situations that may lead to the occurrence of errors from the effects of temperature and the quality of the positioning of the measuring equipment on the control surface.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2015, 3; 86-92
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of digital image correlation to investigate the heterogeneity of Achilles tendon deformation and determine its material parameters
Autorzy:
Kohut, Piotr
Holak, Krzysztof
Ekiert, Martyna
Młyniec, Andrzej
Tomaszewski, Krzysztof A.
Uhl, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/1839687.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
digital image correlation
full-field displacement
strain measurement
vision systems
human Achilles tendon
Young’s modulus
Opis:
The challenge for researchers is to develop measurement techniques that can deal with biological specimens (e.g. the human Achilles tendon) characterized by high deformation during examination. The relevant quantity which has to be investigated in laboratory experiments is the deformation or strain field of the specimen subjected to a given load. In experimental mechanics, the most remarkable technique used for strain field computation is the Digital Image Correlation (DIC) method. In the paper, the DIC method is employed to study biomaterial parameters of human Achilles tendons (AT) subjected to tensile uniaxial loadings. The application of DIC allows the heterogeneity of tendon deformation to be taken into consideration. Young’s modulus of AT based on the strain field obtained from a vision-based measurement is estimated and the results are discussed. A map of Young’s modulus (YM) is demonstrated as well.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 1; 43-52
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Displacement of fertilizer elements from cultivated soils to the soil-ground and surface water
Autorzy:
Terelak, H
Pondel, H.
Powiązania:
https://bibliotekanauki.pl/articles/806299.pdf
Data publikacji:
1993
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
ion concentration
ground
outflow
surface water
fertilizer element
measurement
soil
displacement
potassium
cultivated soil
important element
phosphorus
Opis:
Displacement of fertilizer elements from arable soils to ground and surface waters is discussed. The rate of chemical elements leaching from soils was assessed by measuring their concentrations and outflow in drainage waters, and by measuring ion concentrations and outflow in surface runoff and watercourses draining farming areas.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1993, 400
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rejestracja i analiza pól przemieszczeń i odkształceń za pomocą systemu cyfrowej korelacji obrazu 3D
Registration and analysis of the displacements and strains fields with the use of the digital image correlation system 3D
Autorzy:
Turoń, B.
Ziaja, D.
Miller, B.
Powiązania:
https://bibliotekanauki.pl/articles/105117.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
cyfrowa korelacja obrazu
DIC
metody wizyjne
pomiar bezkontaktowy
pomiary przemieszczeń
pomiary odkształceń
digital image correlation
vision methods
non-contact measurement
displacement
measurement
strain measurements
Opis:
W ostatnich latach jako alternatywę dla tradycyjnych metod pomiarowych przemieszczeń i odkształceń zaczęto intensywnie rozwijać metody bezkontaktowego pomiaru opierające się na systemach optyczno-elektronicznych. Jednym z takich bezkontaktowych systemów pomiarowych jest system cyfrowej korelacji obrazu (ang. Digital Image Correlation, DIC), umożliwiający rejestrację i analizę pól przemieszczeń i odkształceń na powierzchni badanego obiektu w przestrzeni trójwymiarowej. W artykule przedstawiono system 3D DIC na przykładzie systemu Q-450 firmy Dantec Dynamics oraz jego zastosowanie w badaniach połączeń elementów konstrukcji stalowych; omówiono zasadę jego działania i etapy badań. Ponadto w pracy opisano zalety i ograniczenia systemu oraz zakres jego zastosowań. Narzędzia analizy pól przemieszczeń i odkształceń dostępne w programie Istra 4D, stanowiącym część systemu Q-450, pozwalają na szczegółowe określenie deformacji próbki i zjawisk zachodzących w czasie jej obciążania oraz stwarzają możliwość różnorodnej wizualizacji wyników badań. Informacje zawarte w artykule mogą być przydatne dla przyszłych użytkowników systemu i przyczynić się do szerszego stosowania metod bezkontaktowych w pomiarach przemieszczeń i odkształceń.
In recent years, as an alternative to traditional methods of displacements and strains measurements, non-contact methods based on opto-electronic systems have been developed. One of them is the digital image correlation (DIC) system which allows for the registration and analysis of the displacements and strains fields on the surface of the investigated object in three-dimensional space. The paper presents 3D DIC on the example of the Q-450 system from Dantec Dynamics and its application in the study of steel structure elements connections, discusses the principle of its operation and test stages. In addition, the paper describes the applicability of the system, its advantages and limitations. A wide analysis of displacements and strains fields with the use of various tools available in the Q-450 software Istra 4D allows detailed description of the investigated object deformation and the phenomena occurring when the object is loaded. Information presented herein may be useful for future system users and contribute to wider usage of non-contact methods in displacements and strains measurements.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 4/I; 7-28
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Układ sterowania serwonapędem elektropneumatycznym przy zastosowaniu laserowej metody pomiaru przemieszczenia
An electro-pneumatic servo-drive control system using the laser displacement measurement method
Autorzy:
Woś, P.
Dindorf, R.
Mazur, S.
Powiązania:
https://bibliotekanauki.pl/articles/153962.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
serwonapęd elektropneumatyczny
laserowy czujnik przemieszczenia
bezkontaktowy układ pomiarowy
electro-pneumatic servo-system
laser displacement sensor
non-contact measurement
Opis:
W pracy przedstawiono układ regulacji liniowego serwonapędu elektropneumatycznego, w którym do pomiaru przemieszczenia użyto czujnika laserowego. Zastosowanie takiego czujnika umożliwia wykonanie pomiaru odległości metodą bezkontaktową. W opracowany systemie pomiarowym zastosowano adaptacyjny układ regulacji serwonapędu elektropneumatycznego. Przedstawiono wyniki badań porównawczych dotyczących jakości pozycjonowania przy zastosowaniu laserowej i magnetostrykcyjnej metody pomiaru przemieszczenia serwonapędu.
The paper presents a control system for an electro-pneumatic servo-drive which was used to measure the displacement of a laser distance sensor. The use of this sensor allowed applying the non-contact measurement method. The aim of this study was to develop a measurement system for control of an electro-pneumatic servo-drive. The control system contains an adaptive controller. The paper also presents the results of the positioning quality when using a laser and a magnetostrictive sensor. Laser non-contact sensors are used to accurately measure the length and speed of movement of a device and to optimize the manufacturing process. In laser measuring techniques, there is no need for a continuous contact with the element measured. The basic element of the system is a pneumatic cylinder. This actuator is equipped with a magnetostrictive displacement sensor. Fixing of the magnetostrictive displacement sensor needs changes into the actuator construction. In the case of a pneumatic cylinder, installation of the measuring system is difficult and in many cases impossible. The mounting of the sensor can be a source of the measurement inaccuracy. The laser measurement system can be an alternative to the magneto-strictive method of measuring.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 6, 6; 574-577
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of 6DOF platform with wire-based sensors for spatial tracking
Weryfikacja mechanizmu platformowego o 6 stopniach swobody z czujnikami linkowymi do pomiaru przemieszczeń przestrzennych
Autorzy:
Góra, M.
Maniowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/140196.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pomiar
urządzenie namierzające
przemieszczenie przestrzenne
czujnik linkowy
mechanizm o strukturze równoległej
measurement
tracking device
spatial displacement
wire-based sensor
parallel mechanism
Opis:
The paper presents design and experimental verification of platform mechanism with cost-effective wire-based sensors for measuring of spatial displacement or pose of some moving object. This task, also known as spatial tracking, has a very wide application. The proposed mechanism, guided by the moving object, has a parallel structure with two platforms and at least six wire-based sensors for measuring distances between the platform points. Changes of the platform pose cause corresponding changes of the sensors' wire lengths. Forward position problem of an equivalent mechanism model with 6 degrees of freedom is described together with analyses of work space limitations and error propagation in a measurement system. A specific application is illustrated for tracking of a wheel knuckle of 5-link suspension mechanism used in passenger cars. The developed device has the following advantages: it can be installed in a wheel cavity; enables dynamic measurements on the road; is cost-effective. Performance of the latest prototype of the wire-based tracker was verified on the basis of measurements on a test rig, where two other measuring devices were used for comparison purposes.
W pracy przedstawiono wyniki weryfikacji eksperymentalnej opracowanego mechanizmu platformowego z czujnikami linkowymi, przeznaczonego do wyznaczania położenia lub przemieszczenia obiektu w przestrzeni. Potrzeba rozwiązania takiego zadania istnieje w wielu dziedzinach. Autorzy podjęli próbę zastosowania mechanizmu linkowego do mierzenia pozycji i orientacji koła samochodu względem nadwozia. Postawione wymagania konstrukcyjne obejmują m.in.: korzystny stosunek ceny aparatury do dokładności pomiaru; możliwość zainstalowania mechanizmu we wnęce koła; możliwość badań w warunkach dynamicznych podczas testów drogowych samochodu. Zdefiniowane wymagania może spełnić mechanizm o strukturze równoległej i 6 stopniach swobody, składający się z dwóch sztywnych platform połączonych ze sobą co najmniej sześcioma linkami czujników do pomiaru odległości. Sprężyny w czujnikach gwarantują odpowiedni naciąg linek, który uzasadnia opis kinematyczny linki jako łącznika o zmiennej długości i zakończonego sferycznymi przegubami. Platforma stała jest związana z bazą-nadwoziem, a platforma ruchoma jest wodzona przez obiekt-koło, którego trajektoria jest do wyznaczenia. Zmiany pozycji i orientacji platform powodują zmiany długości linek czujników pomiarowych. Rozwiązując zadanie proste manipulatora równoległego wyznacza się szukane położenie koła. Rozłożenie linek musi być odpowiednio dobrane, tak aby nie ograniczać przestrzeni roboczej mechanizmu, np. przez kolizję linek. Oceny właściwości wykonanego prototypu mechanizmu linkowego dokonano na podstawie pomiarów na stanowisku z zainstalowanym zawieszeniem, tzw. pięcio-wahaczowym, kół przednich samochodu VW Passat. Do pomiarów wykorzystano także dwa inne urządzenia do wyznaczania położenia zwrotnicy koła. Porównane wyniki potwierdziły postawione założenia, ale wykazały także pewne niedoskonałości, które planuje się poprawić w kolejnym prototypie urządzenia.
Źródło:
Archive of Mechanical Engineering; 2011, LVIII, 2; 157-174
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmienność modułu sprężystości betonu w trzonie pala przemieszczeniowego w świetle badań laboratoryjnych
Laboratory tests on concrete elastic modulus variation in displacement pile
Autorzy:
Wiszniewski, M.
Krasinski, A.
Linowiecki, J.
Powiązania:
https://bibliotekanauki.pl/articles/40855.pdf
Data publikacji:
2018
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
materialy budowlane
beton
modul sprezystosci
pale przemieszczeniowe
pomiary odksztalcen
badania laboratoryjne
building material
concrete
elasticity modulus
displacement pile
deformation measurement
laboratory research
Źródło:
Acta Scientiarum Polonorum. Architectura; 2018, 17, 3
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie techniki wideo do pomiaru okresu drgań własnych kominów
The use of video technology for measuring the period of oscillation own chimneys
Autorzy:
Gałek, P.
Powiązania:
https://bibliotekanauki.pl/articles/163311.pdf
Data publikacji:
2015
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja smukła
oddziaływanie dynamiczne
komin przemysłowy
okres drgań własnych
przemieszczenie
technika pomiaru
technika wideo
slender structure
dynamic impact
industrial chimney
own oscillation period
displacement
measurement technique
video technique
Opis:
W obliczeniach projektowych lub badaniach stanu technicznego konstrukcji narażonych na oddziaływania dynamiczne potrzebna jest znajomość ich właściwości dynamicznych. Konstrukcjami szczególnie narażonymi na ciągłe wpływy dynamiczne są konstrukcje wieżowe oraz mosty. Z uwagi na często utrudniony dostęp szczególnego znaczenia nabierają metody pomiaru aparaturą zlokalizowaną poza obiektem. W artykule zaproponowano metodę pomiaru okresu drgań własnych za pomocą techniki wideo. Przedmiotem badania był komin żelbetowy w Elektrociepłowni Kraków-Łęg o wysokości 260 m. Wyniki porównano z wartościami otrzymanymi innymi metodami.
When performing design computations and testing technical conditions of structures exposed to dynamic loads, it is necessary to know their dynamic properties. In particular, towers and bridges are continuously subject to dynamic loads. Given that access is often difficult, preferred methods of measurement should not require installation of any devices on the structure itself. This paper proposes a method for measuring a natural vibration period by means of video recording. The object of the study was a reinforced concrete chimney in Kraków-Łęg Power Plant with a height of 260 m. The results were compared with values obtained by other methods.
Źródło:
Przegląd Budowlany; 2015, R. 86, nr 6, 6; 29-31
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-28 z 28

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies