Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "digital signal processing." wg kryterium: Temat


Tytuł:
An Efficient Classification of Hyperspectral Remotely Sensed Data Using Support Vector Machine
Autorzy:
Mahendra, H. N.
Mallikarjunaswamy, S.
Powiązania:
https://bibliotekanauki.pl/articles/2134051.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
support vector machine
SVM
central processing unit
CPU
digital signal processor
DSP
field programmable gate array
FPGA
high level synthesis
HLS
hardware description language
HDL
Opis:
This work present an efficient hardware architecture of Support Vector Machine (SVM) for the classification of Hyperspectral remotely sensed data using High Level Synthesis (HLS) method. The high classification time and power consumption in traditional classification of remotely sensed data is the main motivation for this work. Therefore presented work helps to classify the remotely sensed data in real-time and to take immediate action during the natural disaster. An embedded based SVM is designed and implemented on Zynq SoC for classification of hyperspectral images. The data set of remotely sensed data are tested on different platforms and the performance is compared with existing works. Novelty in our proposed work is extend the HLS based FPGA implantation to the onboard classification system in remote sensing. The experimental results for selected data set from different class shows that our architecture on Zynq 7000 implementation generates a delay of 11.26 μs and power consumption of 1.7 Watts, which is extremely better as compared to other Field Programmable Gate Array (FPGA) implementation using Hardware description Language (HDL) and Central Processing Unit (CPU) implementation.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 3; 609--617
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Construction of Generalized Rademacher Functions in Terms of Ternary Logic : Solving the Problem of Visibility of Using Galois Fields for Digital Signal Processing
Autorzy:
Vitulyova, Elizaveta S.
Matrassulova, Dinara K.
Suleimenov, Ibragim E.
Powiązania:
https://bibliotekanauki.pl/articles/2055235.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
digital signal processing
non-binary Galois fields
fourier transform
rademacher functions
walsh function
multivalued logic
visibility problem
algebraic extensions
ternary representation of number
Opis:
Generalized Rademacher functions, constructed as a sequence of elements of Galois fields are intended to find the spectral representation of signals with levels. These functions form a complete basis on the interval corresponding to -1 discrete time intervals and for passing into the classical Rademacher functions. The advantage of such spectra obtained using Galois Fields Fourier Transform is that the range of variation of the spectrum amplitudes remains the same as the range of variation of the original signal, which is modeled on discrete time functions taking values in the Galois field.
Źródło:
International Journal of Electronics and Telecommunications; 2022, 68, 2; 237--244
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quality assessment of speech signals under a process of echo cancelation in telecommunications systems
Autorzy:
Dobrucki, Andrzej
Kin, Maurycy
Walczyński, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2146665.pdf
Data publikacji:
2022
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
DSP
digital signal processing
echo cancellation
adaptive filtration
sound perception
cyfrowe przetwarzanie sygnałów
kompensacja echa
filtracja adaptacyjna
percepcja dźwięku
Opis:
The phenomenon of echo in the telecommunications channels is caused by the reflection of an electrical signal in a long line. In order to improve the quality of the transmitted sound, various adaptive filters are used to remove or at least reduce the level of the reflected delayed signal. However, such a process may result in a degradation in the quality of speech, although its intelligibility may not get worse. The work presents the results of subjective studies on assessing the quality of speech signals under the process of acoustic echo cancellation using different algorithms. The algorithms studied were: LMS (Least Mean Squares), NLMS (Normalized Least Mean Squares) and AP (Affine Projection). The study consisted of assessing the signal quality after applying the echo elimination process using the Degradation Category Rating method. A total of 312 signals were used in the test: 192 male speech and 120 female speech samples. Echo simulation was used using different delay times and levels of echo signal. Both types of speech have signal delay times of 20 ms, 50 ms, 100 ms and 200 ms with echo level values of -6 dB, -12 dB, -18 dB and -24 dB. In addition, for female speech signals, a delay time of 150 ms was introduced. The study involved 14 people aged between 18 and 38, including six women and eight men. All subjects had normal good hearing. Seven listeners had participated in subjective listening tests of the sound quality assessment previously. The listeners’ opinions were collected on prepared questionnaire. It was found that the highest ratings were given to the AP filter, while the worst ratings were featured the NLMS. It should also be noted that the range between the results obtained for AP and NLMS for female speech is smaller in comparison to male. It is also interesting that the discrepancy in ratings was greatest for a delay time of 100 ms for the AP filter and 200 ms for the LMS filter. It can therefore be concluded from the obtained results that, in the case of acoustic echo cancelation, AP filter introduced the lowest quality degradation while the LMS achieved slightly worse average ratings when compared to the AP filter . The NLMS filter characterized by the worst ratings, and in some cases received twice the quality degradation compared to the AP filter.
Źródło:
Vibrations in Physical Systems; 2022, 33, 1; art. no. 2022111
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modified Block Sparse Bayesian Learning-Based Compressive Sensing Scheme For EEG Signals
Autorzy:
Upadhyaya, Vivek
Salim, Mohammad
Powiązania:
https://bibliotekanauki.pl/articles/1844532.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
compressive sensing
CS
mean square error
MSE
structural similarity index measure
SSIM
electroencephalogram
EEG
digital signal processing
DSP
block sparse Bayesian learning
BSBL
Opis:
Advancement in medical technology creates some issues related to data transmission as well as storage. In real-time processing, it is too tedious to limit the flow of data as it may reduce the meaningful information too. So, an efficient technique is required to compress the data. This problem arises in Magnetic Resonance Imaging (MRI), Electrocardiogram (ECG), Electroencephalogram (EEG), and other medical signal processing domains. In this paper, we demonstrate Block Sparse Bayesian Learning (BSBL) based compressive sensing technique on an Electroencephalogram (EEG) signal. The efficiency of the algorithm is described using the Mean Square Error (MSE) and Structural Similarity Index Measure (SSIM) value. Apart from this analysis we also use different combinations of sensing matrices too, to demonstrate the effect of sensing matrices on MSE and SSIM value. And here we got that the exponential and chi-square random matrices as a sensing matrix are showing a significant change in the value of MSE and SSIM. So, in real-time body sensor networks, this scheme will contribute a significant reduction in power requirement due to its data compression ability as well as it will reduce the cost and the size of the device used for real-time monitoring.
Źródło:
International Journal of Electronics and Telecommunications; 2021, 67, 3; 331-336
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The method of obtaining the spectral characteristics of the scanning probe microscope
Sposób uzyskania charakterystyki widmowej sondy skanującej mikroskopu
Autorzy:
Kataieva, Mariia
Kvasnikov, Vladimir
Powiązania:
https://bibliotekanauki.pl/articles/2174702.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
nano-measurement
digital signal processing
scanning probe microscope
Fourier transform
nano-pomiar
cyfrowe przetwarzanie sygnału
mikroskop z sondą skanującą
transformata Fouriera
Opis:
The article discusses methods and algorithms for digital processing and filtering when carrying out nano-measurements using a scanning probe microscope. The paper discusses frequency methods for improving images, in particular, the use of the Fourier transforms with various filtering methods to improve the quality of the resulting image. Stable computational algorithms have been developed for transforming discrete signals based on the Fourier transform. Methods for the interpretation of the numerical results of the discrete Fourier transform in such packages as Matlab, MathCad, Matematica are presented. It is proposed to use a window transform, developed based on the Fourier transform, which makes it possible to single out the informative features of the signal and to reduce the influence of the destabilizing factors that arise when processing signals from a scanning gold microscope in real conditions.
W artykule omówiono metody i algorytmy cyfrowego przetwarzania i filtracji podczas nano-pomiarów z wykorzystaniem mikroskopu z sondą skanującą. Badane są metody korekcji częstotliwości obrazu, w szczególności wykorzystanie transformaty Fouriera z różnymi metodami filtracji w celu poprawy jakości otrzymanego obrazu. Opracowano stabilne algorytmy obliczeniowe do konwersji sygnałów dyskretnych na podstawie transformaty Fouriera. Przedstawiono metody interpretacji numerycznych wyników dyskretnej transformaty Fouriera w takich pakietach jak Matlab, MathCad, Matematica. Proponuje się zastosowanie transformacji okienkowej opracowanej na podstawie transformaty Fouriera, która pozwala wyodrębnić charakterystykę informacyjną sygnału i zmniejszyć wpływ czynników destabilizujących występujących podczas przetwarzania sygnału z mikroskopu z sondą skanującą w warunkach rzeczywistych.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2021, 11, 2; 52--55
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic recognition of artificial reverberation settings in speech recordings
Autorzy:
Kachniarz, Krzysztof
Lewandowski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/128124.pdf
Data publikacji:
2019
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
artificial reverberation
machine learning
digital audio signal processing
sztuczny pogłos
uczenie maszynowe
cyfrowe przetwarzanie sygnałów audio
Opis:
The aim of this study is to create the method for automatic recognition of artificial reverberation settings extracted from a reference speech recordings. The proposed method employs machine-learning techniques to support the sound engineer in finding the ideal settings for artificial reverberation plugin available at a given Digital Audio Workstation (DAW), i.e. Gaussian Mixture Model (GMM) approach and deep Convolutional Neural Network (CNN) VGG13, which is a novel approach. Training set and data set are 1885 speech signals selected from a EMIME Bilingual Database which were processed with 66 artificial reverberation presets selected from Semantic Audio Labs’s SAFE Reverb plugin database. Performance of the proposed automatic recognition method was evaluated using similarity measures between features of reference and analysed speech recordings. Evaluation procedure showed that a classical GMM approach gives 43.8% of recognition accuracy while proposed method with VGG13 deep CNN gives 99.94% of accuracy.
Źródło:
Vibrations in Physical Systems; 2019, 30, 1; 1-8
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Camera identification based on PRNU analysis
Identyfikacja aparatu fotograficznego na podstawie analizy szumu matrycy PRNU
Autorzy:
Trusz, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/501816.pdf
Data publikacji:
2019-11-29
Wydawca:
Agencja Bezpieczeństwa Wewnętrznego
Tematy:
source camera identification
PRNU (photo response non-uniformity)
PCE (Peak to Correlation Energy) FSTV (First step Total Variation)
digital signal processing
identyfikacja aparatu fotograficznego wzorzec szumu PRNU
współczynnik korelacji PCE
algorytm FSTV
przetwarzanie obrazów cyfrowych
Opis:
This article presents a method for source camera identification based on PRNU (photo response non-uniformity) analysis. Considering the imperfections during the manufacturing process, in practice it is not possible to produce two identical sensors. This is connected, among others, with tolerances during manufacture process. That’s why, the PRNU parameter can be treated as a specific “camera fingerprint”, which is individual for every sensor. During this researches, 33 cameras were analyzed, and divided into 5 groups (the criterion was the camera model). The main goal of analysis were determining if individual identification of a camera from a group of devices it’s possible. The PCE (Peak to Correlation Energy) correlation coefficient higher than 50 was criterion for correct linked between camera and questioned files. Analyzed images was not edited, and have the same technical parameters like questioned files. Moreover reference files was made in similar conditions like evidence photos. Analysis were provided of couple of the same cameras like evidence device. Conclusion was, that we can identify specific camera model using PRNU analysis, however, some of condition should be performed, among others, analyzed a couple of the same device like suspect camera, quality of analyzed evidence files, quantity of correlation coefficient.
W artykule zaprezentowano metodę identyfikacji aparatu fotograficznego na podstawie analizy szumu matrycy PRNU (ang. photo response non-uniformity). Zważając na niedoskonałości podczas procesu produkcyjnego matryc, w praktyce nie jest możliwe wyprodukowanie dwóch sensorów o takich samych właściwościach. Dzieje się tak chociażby ze względu na stosowanie pewnego zakresu tolerancji podczas ich wytwarzania. Parametr PRNU może być zatem traktowany jako swoisty „odcisk palca sensora”, będący jego indywidualną cechą. Podczas zrealizowanych badań analizom poddano 33 egzemplarze aparatów fotograficznych, które podzielono na pięć grup (kryterium podziału stanowił model aparatu fotograficznego). Wykonane analizy miały na celu określenie, czy jest możliwa indywidualna identyfikacja aparatu fotograficznego z grupy urządzeń tego samego modelu. Jako kryterium oceny i prawidłowego wskazania określono współczynnik korelacji PCE (ang. peak to correlation energy) większy od 50. Analizowano zdjęcia niepoddane edycji, wykonane w warunkach zbliżonych do zdjęć kwestionowanych oraz charakteryzujące się takimi samymi parametrami technicznymi. Ze względów statystycznych badania wykonywano na co najmniej kilku egzemplarzach tego samego urządzenia. Po wykonaniu eksperymentów stwierdzono, że możliwa jest identyfikacja indywidualna aparatu fotograficznego, jednakże, uwzględniając jakościowy charakter przedmiotowych badań, na formułowanie wniosków końcowych wpływ ma m.in. próba, na której dokonano analiz, jakość materiałów dowodowych oraz otrzymane wartości współczynnika korelacji
Źródło:
Przegląd Bezpieczeństwa Wewnętrznego; 2019, 11, 21; 393-413
2080-1335
2720-0841
Pojawia się w:
Przegląd Bezpieczeństwa Wewnętrznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Derivation of Motor Mean Phase Currents in PMSM Drives Operating with Low Switching-to-Fundamental Frequency Ratio
Autorzy:
Jarzebowicz, Leszek
Powiązania:
https://bibliotekanauki.pl/articles/1193701.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
electric drives
high-speed drives
current control
current measurement
Permanent Magnet Synchronous Drives
Digital Signal Processing
Opis:
Pulse width modulation (PWM) of inverter output voltage causes the waveforms of motor phase currents to consist of distinctive ripples. In order to provide suitable feedback for the motor current controllers, the mean value must be extracted from the currents’ waveforms in every PWM cycle. A common solution to derive the mean phase currents is to sample their value at the midpoint of a symmetrical PWM cycle. Using an assumption of linear current changes in steady PWM subintervals, this midpoint sample corresponds to the mean current in the PWM cycle. This way no hardware filtering or high-rate current sampling is required. Nevertheless, the assumption of linear current changes has been recently reported as over simplistic in permanent magnet synchronous motor (PMSM) drives operating with low switching-to-fundamental frequency ratio (SFFR). This, in turn, causes substantial errors in the representation of the mean phase currents by the midpoint sample. This paper proposes a solution for deriving mean phase currents in low SFFR PMSM drives, which does not rely on the linear current change assumption. The method is based on sampling the currents at the start point of a PWM cycle and correcting the sampled value using a model-based formula that reproduces the current waveforms. Effectiveness of the method is verified by simulation for an exemplary setup of high-speed PMSM drive. The results show that the proposed method decreases the error of determining the mean phase currents approximately 10 times when compared to the classical midpoint sampling technique.
Źródło:
Power Electronics and Drives; 2019, 4, 39; 95-102
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Employing FPGA DSP blocks for time-to-digital conversion
Autorzy:
Kwiatkowski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/221505.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
time-to-digital converter
time coding line
time interval counter
digital signal processing
field-programmable gate array
Opis:
The paper presents a novel implementation of a time-to-digital converter (TDC) in field-programmable gate array (FPGA) devices. The design employs FPGA digital signal processing (DSP) blocks and gives more than two-fold improvement in mean resolution in comparison with the common conversion method (carry chain-based time coding line). Two TDCs are presented and tested depending on DSP configuration. The converters were implemented in a Kintex-7 FPGA device manufactured by Xilinx in 28 nm CMOS process. The tests performed show possibilities to obtain mean resolution of 4.2 ps but measurement precision is limited to at most 15 ps mainly due to high conversion nonlinearities. The presented solution saves FPGA programmable logic blocks and has an advantage of a wider operation range when compared with a carry chain-based time coding line.
Źródło:
Metrology and Measurement Systems; 2019, 26, 4; 631-643
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja aparatu fotograficznego na podstawie analizy szumu matrycy PRNU
Camera identification based on PRNU analysis
Autorzy:
Trusz, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/501924.pdf
Data publikacji:
2019-11-29
Wydawca:
Agencja Bezpieczeństwa Wewnętrznego
Tematy:
identyfikacja aparatu fotograficznego
wzorzec szumu PRNU
współczynnik korelacji PCE
algorytm FSTV
przetwarzanie obrazów cyfrowych
source camera identification
PRNU (photo response non-uniformity)
PCE (Peak to Correlation Energy)
FSTV (First step Total Variation)
digital signal processing.
Opis:
W artykule zaprezentowano metodę identyfikacji aparatu fotograficznego na podstawie analizy szumu matrycy PRNU (ang. photo response non-uniformity). Zważając na niedoskonałości podczas procesu produkcyjnego matryc, w praktyce nie jest możliwe wyprodukowanie dwóch sensorów o takich samych właściwościach. Dzieje się tak chociażby ze względu na stosowanie pewnego zakresu tolerancji podczas ich wytwarzania. Parametr PRNU może być zatem traktowany jako swoisty „odcisk palca sensora”, będący jego indywidualną cechą. Podczas zrealizowanych badań analizom poddano 33 egzemplarze aparatów fotograficznych, które podzielono na pięć grup (kryterium podziału stanowił model aparatu fotograficznego). Wykonane analizy miały na celu określenie, czy jest możliwa indywidualna identyfikacja aparatu fotograficznego z grupy urządzeń tego samego modelu. Jako kryterium oceny i prawidłowego wskazania określono współczynnik korelacji PCE (ang. peak to correlation energy) większy od 50. Analizowano zdjęcia niepoddane edycji, wykonane w warunkach zbliżonych do zdjęć kwestionowanych oraz charakteryzujące się takimi samymi parametrami technicznymi. Ze względów statystycznych badania wykonywano na co najmniej kilku egzemplarzach tego samego Urządzenia. Po wykonaniu eksperymentów stwierdzono, że możliwa jest identyfikacja indywidualna aparatu fotograficznego, jednakże, uwzględniając jakościowy charakter przedmiotowych badań, na formułowanie wniosków końcowych wpływ ma m.in. próba, na której dokonano analiz, jakość materiałów dowodowych oraz otrzymane wartości współczynnika korelacji.
This article presents a method for source camera identification based on PRNU (photo response non-uniformity) analysis. Considering the imperfections during the manufacturing process, in practice it is not possible to produce two identical sensors. This is connected, among others, with tolerances during manufacture process. That’s why, the PRNU parameter can be treated as a specific “camera fingerprint”, which is individual for every sensor. During this researches, 33 cameras were analyzed, and divided into 5 groups (the criterion was the camera model). The main goal of analysis were determining if individual identification of a camera from a group of devices it’s possible. The PCE (Peak to Correlation Energy) correlation coefficient higher than 50 was criterion for correct linked between camera and questioned files. Analyzed images was not edited, and have the same technical parameters like questioned files. Moreover reference files was made in similar conditions like evidence photos. Analysis were provided of couple of the same cameras like evidence device. Conclusion was, that we can identify specific camera model using PRNU analysis, however, some of condition should be performed, among others, analyzed a couple of the same device like suspect camera, quality of analyzed evidence files, quantity of correlation coefficient
Źródło:
Przegląd Bezpieczeństwa Wewnętrznego; 2019, 11, 21; 247-271
2080-1335
2720-0841
Pojawia się w:
Przegląd Bezpieczeństwa Wewnętrznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radiolokacyjny imitator celu
Radar target imitator
Autorzy:
Żygadło, Stanisław
Grzywiński, Stanisław
Achtenberg, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/235119.pdf
Data publikacji:
2019
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
sygnał radiolokacyjny
bezpośrednia synteza cyfrowa
cyfrowe przetwarzanie sygnału
DSP
radar signal
direct digital synthesis
DDS
digital signal processing
Opis:
W referacie opisano zaprojektowany i wykonany praktycznie jednokanałowy imitator sygnałów radiolokacyjnych, który pozwala na generację sygnału odbitego od celu o zadanej trajektorii, dla pasma częstotliwości pośredniej. Przedstawione w referacie stanowisko może być wykorzystane do weryfikacji analogowego traktu przetwarzania sygnału radiolokacyjnego na częstotliwości pośredniej oraz algorytmów DSP wykorzystywanych do estymacji współrzędnych imitowanego celu.
The paper describes a single channel imitator for radar signals which was designed and made practically to generate a signal reflected from an aerial target with a given trajectory on the intermediate frequency band. Presented setup can be used to verify the analog channel for radar signal processing at intermediate frequencies and the DSP algorithms used to estimate coordinates of the imitated target.
Źródło:
Problemy Techniki Uzbrojenia; 2019, 48, 149; 75-83
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The design of digital audio filter system used in tomatis method stimulation
Autorzy:
Jóźwiak, Krzysztof
Bujacz, Michał
Królak, Aleksandra
Powiązania:
https://bibliotekanauki.pl/articles/384341.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
sound filtering
digital signal processing
shelving filter
FIR filter
Electronic Ear stimulator
Tomatis Method
filtrowanie dźwięku
przetwarzanie sygnału cyfrowego
filtr FIR
metoda Tomatisa
Opis:
The Tomatis Method is a rehabilitation technique used in psychology, the main aim of which is stimulating the cochlea in the inner ear by filtered air-conducted and bone-conducted sounds. The system of electronic filters and amplifiers used for this therapy is called the Electronic Ear. Commonly, it is a commercial analog device that is expensive and after a few years its functionality declines. In this paper, we propose a digital Electronic Ear system using an STM32F4 family micro-controller and ADC/ DAC integrated circuits. The design of the digital sound filters allows to adjust more parameters and overcomes some of the constraints of analog systems. In this paper, we provide a short review of the Tomatis Method, the main functions of the Electronic Ear and we describe the designed system with comparison measurements to the analog original.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2019, 13, 1; 73-78
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ parametrów banku filtrów na skuteczność redukcji szumu w sygnale pomiarowym przy zastosowaniu algorytmu dyskretnej transformacji falkowej
Influence of filter bank parameters on signal denoising using discrete wavelet transform
Autorzy:
Dróżdż, Łukasz
Roj, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/267431.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
dyskretna transformacja falkowa
odszumianie sygnału
cyfrowe przetwarzanie sygnałów
discrete wavelet transform
signal denoising
digital signal processing
Opis:
W artykule przedstawiono metodę usuwania szumu z sygnału pomiarowego bazującą na zastosowaniu dyskretnej transformacji falkowej. Przeprowadzone badania miały na celu wskazanie wpływu parametrów banku filtrów na skuteczność redukcji szumu w sygnale pomiarowym. Badania obejmowały ustalenie wpływu rodzaju falki oraz liczby poziomów dekompozycji na skuteczność algorytmu usuwania szumu. Prawidłowy dobór tych parametrów jest kluczowy do prawidłowego działania algorytmu.
Paper describes signal denoising algorithm based on discrete wavelet transform. Research includes search how filterbank parameters influences on signal denoising. Paper describes how decomposition count and wavelet type influences on denoising process. Right choice of this parameters is very important to algorithm performs well. The wavelet transform algorithm is a tool enabling the analysis of signals by presenting them using a scaled and time-shifted function called a „mother wavelet”. Signal analysis requires decomposition process performed by filter banks witch parameters depends on mother wavelet and count of decomposition iterations. Presented wavelet signal denoising technique focuses on transform coefficient correction based on estimated noise parameters. This correction can be performed in many ways, depending on used strategy. Paper presents hard thresholding algorithm based on adaptive noise parameters estimation. According to simulation results the mother wavelet choice is not as important, as choice of right decompositions level count. Presented method provides better results than other common methods such Gaussian filter or average filter.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2019, 66; 11-14
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie komputerowej symulacji w środowisku Multisim w procesie kształcenia inżyniera
The use of a computer simulations in a Multisim environment in education of engineers
Autorzy:
Noga, Krystyna Maria
Powiązania:
https://bibliotekanauki.pl/articles/268548.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
teoria obwodów
elektrotechnika
technika cyfrowa
cyfrowe przetwarzanie sygnałów
elektronika
symulacje komputerowe
pakiet Multisim
circuit theory
electrotechnics
digital technique
digital signal processing
electronics
computer simulations
Multisim software
Opis:
Symulacja komputerowa jest metodą badania zachowania obwodów, które można analizować bez konieczności ich fizycznego budowania. Pakiet Multisim jest wirtualnym narzędziem, które służy do komputerowej analizy układów analogowych i cyfrowych. Do badanych obwodów można dołączyć różne przyrządy pomiarowe, których obsługa jest podobna do obsługi mierników rzeczywistych. W artykule zostały przedstawione przykłady zastosowania pakietu Multisim w procesie kształcenia inżyniera, a szczególnie w zakresie elektrotechniki, teorii obwodów, elektroniki, techniki cyfrowej, cyfrowego przetwarzania sygnałów.
Computer simulation is a mathematical method of studying the behavior of circuits without the need to physically build them. Demonstrations and simulation studies play a significant role in didactics, research and design, which is primarily determined by economic considerations. There are many programs that enable simulation of various phenomena and systems in the field of electrical and electronic engineering, eg EDA, CAD. In scientific research and teaching, the SPICE environment, Multisim (as SPICE version), Mathcad, Matlab, Simulink, LabVIEW are often used.Multisim environment is a virtual tool that allows simulation of almost every electrical and electronic circuit, used for computer analysis of analogue and digital circuits. Various measuring devices can be connected to the tested circuits, the operation of which is similar to the operation of real meters. The article presents examples of the use of Multisim environment in the process of educating an engineer, especially in the field of electrical engineering, circuit theory, electronics, digital technique, digital signal processing.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2019, 65; 105-110
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka łożysk silnika indukcyjnego poprzez analizę prądu silnika metodą NTC. Część I – opis zastosowanej metody
Induction motor bearings diagnostic with motor current signature analysis and normalized triple covariance. Part I – NTC
Autorzy:
Ciszewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/268379.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
diagnostyka łożysk silnika indukcyjnego
MCSA
cyfrowe przetwarzanie sygnału
statystyki wyższych rzędów
induction motor bearings diagnostic
digital signal processing
higher order spectra
Opis:
W artykule zaprezentowano nową metodę przetwarzania sygnału prądu silnika indukcyjnego do celów diagnostyki łożysk oraz jej walidację przy pomocy badań eksperymentalnych. Badania przeprowadzono dla trzech różnych uszkodzeń łożysk przy pełnym obciążeniu silnika. Pierwsza część artykułu zawiera wprowadzenie do tematyki diagnostyki łożysk, przegląd metod diagnostycznych oraz podstawy teoretyczne zastosowanej przez autora metody. W drugiej części artykułu przedstawiono wyniki badań eksperymentalnych dla łożysk z celowo wprowadzonymi uszkodzeniami oraz dla łożysk bez uszkodzeń.
One of the most popular electric machines in the world industry is an induction motor (IM). Due to simple construction its bearings are the part most susceptible to damage. Therefore, bearing diagnosis is very important in maintaining the driveline. Diagnostic of most parts of the IM through motor current signature analysis (MCSA) are already well described and used in the industry. As such, bearing diagnosis through MCSA would be very convenient from economic point of view. It would allow to reduce the cost of diagnostics through a diagnosis of all motor parts by measuring only one physical quantity. The objective of research that were carried out was to propose and test a new efficient MCSA bearings diagnostic method. The proposed method is the Normalized Triple Covariance (NTC). This higher order spectra signal processing technique is a new approach in IM bearings diagnostic with MCSA. Part I of the paper contains an introduction to the subject of bearing diagnostics, review of diagnostic methods and theoretical basis of the NTC. Part II covers experimental results of the proposed method and final conclusions.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2018, 61; 23-26
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies