Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "contact pressure" wg kryterium: Temat


Tytuł:
Adsorption of natural surfactants present in sea waters at surfaces of minerals: contact angle measurements
Autorzy:
Mazurek, A.
Pogorzelski, S.J.
Boniewicz-Szmyt, K.
Powiązania:
https://bibliotekanauki.pl/articles/48416.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
mineral
Baltic Sea
natural surfactant
solid-liquid interface
Gdansk Gulf
film pressure
contact angle hysteresis
film-covered surface
sea water
adsorption
Opis:
The wetting properties of solid mineral samples (by contact angles) in original surfactant-containing sea water (Gulf of Gdańsk,Ba ltic) were characterised under laboratory conditions on a large set (31 samples) of well-classified stones of diverse hydrophobicity using the sessile drop (ADSA-P approach),ca ptive bubble and inclined plate methods. An experimental relation between the static contact angle θeq and stone density ρ was obtained in the form θeq = Bρ + C,wher e B = 12.23 ± 0.92, C = −(19.17 ± 0.77),an d r2 = 0.92. The histogram of θeq distribution for polished stone plates exhibited a multimodal feature indicating that the most abundant solid materials (hydrophilic in nature) have contact angles θeq = 7.2,10. 7,15. 7 and 19.2◦,whic h appear to be applicable to unspecified field stones as well. The contact angle,a pH-dependent quantity,ap pears to be a sensitive measure of stone grain size,e.g . granite. The captive bubble method gives reproducible results in studies of porous and highly hydrophilic surfaces such as stones and wood. The authors consider the adsorption of natural sea water surfactants on stone surfaces to be the process responsible for contact angle hysteresis. In the model,an equation was derived for determining the solid surface free energy from the liquid’s surface tension γLV; it also enabled the advancing θA and receding θR contact angles of this liquid to be calculated. Measurements of contact angle hysteresis Δθ(= θA − θR) with surfactant-containing sea water and distilled water (reference) on the same stone surfaces allowed the film pressure ΔΠ (1.22 to 8.80 mJ m−2), solid surface free energy ΔγS (−17.03 to −23.61 mJ m−2) and work done by spreading ΔWS (−1.23 to −11.52 mJ m−2) to be determined. The variability in these parameters is attributed to autophobing,an effect operative on a solid surface covered with an adsorptive layer of surfactants. The wetting behaviour of solid particles is of great importance in numerous technological processes including froth flotation,d emulgation,an ti-foaming procedures and the coal industries. It is believed that the approach presented here and the examples of its application to common sea water/solid mineral systems could be successfully adapted to optimise several surfactant-mediated adsorption processes (see below) of practical value in natural water ecology.
Źródło:
Oceanologia; 2009, 51, 3; 377-403
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative FEM algorithm of determining piston ring pressure distribution on a cylinder to a contact simulation
Autorzy:
Kaliszewski, M.
Mazuro, P.
Powiązania:
https://bibliotekanauki.pl/articles/793393.pdf
Data publikacji:
2016
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
finite element modelling
algorithm
piston ring
pressure distribution
contact simulation
ANSYS programme
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2016, 16, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatization of contact pressure measurement between trunk orthosis and patients body using a matrix tactile sensor
Autorzy:
Hudák, R.
Rajťúková, V.
Živčák, J.
Powiązania:
https://bibliotekanauki.pl/articles/386524.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
Matrix Tactile Sensor
MTS
Contact Pressure
Trunk Orthosis
Scoliosis
orteza tułowia
skolioza
Opis:
Trunk orthosis affects trunk by a corrective-pressure mode with an objective to correct deformities (e.g. scoliosis). The effectiveness of this function depends on various factors, i.e. correct orthosis manufacture, correct application to patients and regular pressure corrective effect control. All these factors can be monitored by a system for measurement and evaluation of the contact pressure between the instrument and trunk in a real time and also by a so called “off line” system data recording. Presented article describes the application of made-to-measure sensor system TACTILUS (Sensor Products, USA) in different regimes (ambulance – A, home – H, combined – HA and multi-sensory ambulance – MA regime), testing of chosen static and dynamic matrix tactile sensor (MTS) parameters and results of the testing application between orthosis and patients' trunks.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 1; 38-43
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Axi-symmetrical contact problem during breaking with frictional heating and wear
Osiowosymetryczne kontaktowe zagadnienie podczas hamowania z uwzględnieniem generacji ciepła
Autorzy:
Yevtushenko, A.
Chapovska, R.
Powiązania:
https://bibliotekanauki.pl/articles/281236.pdf
Data publikacji:
1998
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
frictional heating
wear
contact pressure
temperature
breaking system
Opis:
The problem of transient contact with frictional heating and wear for two non-uniform sliding half-spaces is considered. One of the two halfspaces is assumed to be slightly curved to give a Hertzian initial pressure distribution; the other is a rigid non-conductor. On the assumption that the contact pressure distribution could be described by the Hertz formulas during whole the process of interaction, the problem is formulated in terms of one integral equation of the Volterra type an unknown radius of the contact area. A numerical solution of this equation is obtained using a piecewise-constant representation of unknown function. The influence of operating parameters on the contact temperature and the radius of the contact area is studied.
W pracy rozpatrzono zagadnienie kontaktowe z uwzględnieniem generacji ciepła dla dwóch ślizgających się półprzestrzeni. O jednej z półprzestrzeni założono, że jest gładko zakrzywiona co powoduje Hertzowski początkowy rozkład ciśnienia. Druga z półprzestrzeni jest izolatoerm. Wykorzystując założenie, że ciśnienie kontaktowe może być założone w postaci rozkładu otrzymanego przez Hertza podczas trwania oddziaływania, zagadnienie zostało zredukowane do równania całkowego typu Voltera na nieznany promień obszaru kontaktu. Rozwiązanie numeryczne zostało przedstawione wykorzystując kawałkami stałą reprezentację nieznanej funkcji. Zbadano wpływ parametrów charakteryzujących ciała na temperaturę w obszarze kontaktu oraz promień obszaru kontaktu.
Źródło:
Journal of Theoretical and Applied Mechanics; 1998, 2; 331-346
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie mechaniki współdziałania stykowego ze zużyciem w układach cylindrycznych o wewnętrznym styku hertzowskim
Research of tribocontact interaction mechanics in cylindrical conjunctions with inside hertz contact
Autorzy:
Czerniec, M.
Czerniec, J.
Powiązania:
https://bibliotekanauki.pl/articles/190148.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
połączenia cylindryczne o styku wewnętrznym
wzór Hertza
obszar jego zastosowania
zużycie
zmodyfikowany wzór Hertza
naciski stykowe
trwałość
cylindrical conjunction with inside contact
Hertz formula
its using limits
wear
modified Hertz formula
contact pressure
longevity
Opis:
Na podstawie metody autorskiej badania mechaniki styku w połączeniu cylindrycznym oraz kinetyki jego zużywania przy tarciu ślizgowym przeprowadzono analizę numeryczną obszaru zastosowania klasycznego wzoru Hertza dla określenia nacisków stykowych. Zmodyfikowano wzory Hertza celem oszacowania maksymalnych nacisków stykowych oraz kąta styku przy zużyciu wskazanych układów tribologicznych. Wyniki numerycznej oceny według obu metod wstępnych nacisków stykowych oraz ich zmiany w wyniku zużycia podano w postaci graficznej. Został przebadany wpływ obciążenia oraz luzu promieniowego w połączeniu na jego trwałość.
On the basis of the author's research method of cylindrical conjunction contact mechanics and wear kinetics during sliding friction, numeral analysis of classical Hertz formula using sphere for contact pressures has been made. Hertz formulas for the valuation of tribocontact pressures and angles during appointed tribosystems wear have been modified. The results of numerical valuation, according to both methods of contact and tribocontact pressures, are presented graphically. Additionally, the influence of loading and rational clearance on its longevity has been investigated.
Źródło:
Tribologia; 2011, 2; 13-22
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ciśnienie i docisk oraz szerokość strefy kontaktu między cylindrami i wałkami w drukującej maszynie offsetowej – przegląd literatury
Pressure, press clamping and width of a contact zone between cylinders and rollers in an offset printing machine – review of the printing literature
Autorzy:
Jurkiewicz, A.
Pyr'yev, Y.
Powiązania:
https://bibliotekanauki.pl/articles/128470.pdf
Data publikacji:
2016
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Przemysłu Poligraficznego
Tematy:
drukowanie offsetowe
maszyna offsetowa
nacisk
strefa kontaktu
offset printing
offset printing machine
pressure
press clamping
contact zone
Opis:
The printing literature provides different values of pressure between cylinders in the printing unit and between rollers in the ink unit of the offset printing machine. Very often there is no information on whether a given value of pressure is maximum or average. Another frequent problem referred to in the printing literature is that authors do not reveal the source of theorems, equations or other important information. This article includes a set of values collected for pressure, line pressure, press clamping and the contact zone width that have been presented by other authors in their specific articles and books. It also includes definitions of pressure, line pressure, press clamping, indentation of blanket and metric clamping. In addition, the article briefly presents findings of the experimental research related to the contact zone between cylinders and rollers was carried out in the printing unit and in the ink unit until present. This article also gives publication references which provide for different equations concerned with the clamping force of cylinders, their compression or indentation, the contact zone width and the impact the specific stress-strain has on blankets.
Źródło:
Acta Poligraphica; 2016, 8; 9-27
2299-9981
Pojawia się w:
Acta Poligraphica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational simulation analysis for torus radius of edge contact in hip prostheses
Autorzy:
Li, F.
Chen, H
Mao, K.
Powiązania:
https://bibliotekanauki.pl/articles/307414.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
staw biodrowy
endoproteza
kontakt Hertza
nacisk kontaktowy
hip prostheses
Hertzian contact
edge torus radius
contact pressure
contact dimensions
inclination angle
Opis:
Stripe wear occurs when the components of hip prostheses move a sufficient distance laterally to contact the edge of the acetabular cup, causing abnormally high contact stresses. In this research, edge loading contact of prosthetic hip is analyzed in the most commonly used material pairs. The contact dimensions and maximal contact pressure are investigated in mutative normal edge loading with 3 different inclination angles (15°, 20°, 25°) and in alterable edge torus radius with edge loading of 2500 N and inclination of 20°. A computational case was conducted for a 14 mm radius alumina ceramic bearing with a radial clearance of 0.1 mm using a normal edge loading ranged from 0 N to 3000 N. Additionally, the Hertzian theory successfully captures principal curvature trends of the edge torus on the influence of maximal contact pressure and obtains the appropriate edge radius range for lower maximal contact pressure. This work elucidates the methods of applying classical contact theory to design the edge radius of hip bearings to better resist severe edge loading contact stresses and reduce the stripe wear.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 3; 67-73
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conditions of proper interaction of low-pressure injection piles (LIP) with structure and soil, carrying capacity of pile anchorage in foundation
Autorzy:
Pachla, H.
Powiązania:
https://bibliotekanauki.pl/articles/178602.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
low-pressure injection pile
pile anchorage in foundation
contact surface
foundation design
Opis:
The formation of a pile in the existing foundation and soil creates a new foundation construction which has a structure of foundation-pile-soil. This construction must be able to transfer loads from the foundation to the pile and from the pile to the soil. The pile structure has to transfer an imposed load. From the point of view of continuum mechanics determination of the capacity of such a system is preceded by the analysis of contact problem of three contact surfaces. Each of these surfaces is determined by different pairs of materials. The pair which creates a pile anchorage is a material from which the foundation is built (structure of stone and grout, brick and grout, concrete or reinforced concrete and grout. The pile structure is formed by grout and steel rebar. The pile formed in soil is created by a pair of grout and soil. What is important is that on contact surfaces the materials adhering to one another are subjected to different deformation types that are controlled by mechanical properties and geometry of these surfaces. In the paper, additional conditions that should be fulfilled for the foundation-pile-soil system to make load transfer from foundation to soil possible and safe are presented. The results of research done by the author on foundation-pile contact surface are discussed. The tests were targeted at verifying the bearing capacity of anchorage and deformation of piles made of grout and other materials from which foundations are built. The specimens were tested in tension and compression. The experiments were conducted on the amount specimens which is regarded as small sample to enable the statistical analysis of the results.
Źródło:
Studia Geotechnica et Mechanica; 2016, 38, 4; 33-49
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contact interaction between corrugated steel shell and the soil backfill determined based on the measurements of shell deformations
Oddziaływanie kontaktowe między powłoką ze stali falistej a zasypką gruntową określone na podstawie pomiarów odkształceń powłoki
Autorzy:
Machelski, Czesław
Korusiewicz, Leszek
Powiązania:
https://bibliotekanauki.pl/articles/1853637.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
konstrukcja gruntowo-powłokowa
napór gruntu
deformacja powłoki
oddziaływanie kontaktowe
blacha falista
zasypka gruntowa
soil-shell structure
earth pressure
shell deformation
contact interaction
corrugated steel plate
soil backfill
Opis:
Unlike in conventional bridges, the backfill and the roadway pavement have a major bearing on the load capacity of buried corrugated metal structures. In the soil-steel structure model one can distinguish two structural subsystems: the shell made of corrugated steel plates and the soil backfill with the road pavement. The interaction between them is modelled as a contact (interfacial) interaction, i.e. forces normal and tangent to the surface of the shell. The normal interactions are variable during both construction and service life. Two algorithms are presented. In the first algorithm on the basis of unit strains the internal forces in the shell are determined and consequently the contact interactions are calculated. A large number of measuring points distributed on the circumferential section of the shell is needed for the calculations. In the second algorithm the collocation condition, according to which the result obtained from the shell geometry model must agree with the measured displacement of the structure’s collocation point, is used. When there are more such points, the estimated result is more precise. The advantage of both algorithms is that they take into account the physical characteristics of the soil in the backfill layers, but above all the backfill laying and compacting technology. The results of such analyses can be the basis for comparing the effectiveness of conventional geotechnical models.
Charakterystyczną cechą konstrukcji gruntowo-powłokowych, w odróżnieniu od klasycznych mostów, jest duży wpływ zasypki gruntowej i nawierzchni jezdni jako elementów nośnych obiektu. W modelu obiektu gruntowo-powłokowego wyróżnia się dwa podukłady konstrukcyjne: powłokę z blachy falistej oraz zasypkę gruntową z nawierzchnią. Współdziałanie pomiędzy nimi modeluje się jako oddziaływanie kontaktowe, czyli siły o kierunku normalnym i stycznym do powierzchni powłoki. Oddziaływania te są zmienne w czasie budowy jak również podczas eksploatacji. W pracy podano dwa algorytmy wyznaczania sił kontaktowych. W pierwszym na podstawie odkształceń jednostkowych określa się siły wewnętrzne w powłoce a stąd oddziaływania kontaktowe. Do obliczeń niezbędna jest duża liczba punktów pomiarowych rozmieszczonych na paśmie obwodowym powłoki. W drugim algorytmie wykorzystuje się warunek kolokacji polegający na tym, że wynik obliczeń uzyskany z modelu geometrii powłoki ma być zgodny w rezultatem pomiaru przemieszczenia punktu kolokacyjnego obiektu. Gdy takich punktów jest więcej oszacowanie wyniku jest dokładniejsze. Zaletą obydwu algorytmów jest uwzględnienie cech fizycznych gruntu w warstwach zasypki a przede wszystkim technologii jej układania i zagęszczania. Wyniki tych analiz mogą być podstawą do porównań skuteczności klasycznych modeli geotechnicznych. Chociaż zależność między siłami kontaktowymi a deformacją powłoki jest znana, to procedury określenia oddziaływań kontaktowych na podstawie doświadczalnie wyznaczonych odkształceń czy też przemieszczeń powłoki nie są ściśle opisane. Celem pracy było przedstawienie takich procedur na przykładzie dwóch różnych obiektów gruntowo-powłokowych.
Źródło:
Archives of Civil Engineering; 2021, 67, 1; 57-79
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Construction Changes in the Teeth of a Gear Transmission on Acoustic Properties
Autorzy:
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/90168.pdf
Data publikacji:
2012
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
gear
tooth height
gear contact ratio
sound pressure level
Opis:
This paper presents results of experimental research on the acoustic properties of gear wheels with high-profile teeth with differentiated tooth height. Those results showed that gear transmissions with high-profile teeth have the best acoustic properties, with the value of the transverse contact ratio εα ≈ 2.0. They also showed that a reduction in tooth height, and thereby in contact ratio, increased the sound pressure level.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2012, 18, 4; 499-507
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental verification of integrity of low-pressure injection piles structure – pile internal capacity
Autorzy:
Pachla, H.
Powiązania:
https://bibliotekanauki.pl/articles/178587.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact surface
foundation design
low-pressure injection pile
pile internal capacity
Opis:
The idea of strengthening the foundation using injection piles lies in transferring loads from the foundation to the piles Anchorage in existing structure and formed in the soil. Such a system has to be able to transfer loads from the foundation to the pile and from the pile onto the soil. Pile structure often reinforced with steel element has to also be able to transfer such a loading. According to the rules of continuum mechanics, the bearing capacity of such a system and a deformation of its individual elements can be determined by way of an analysis of the contact problem of three interfaces. Each of these surfaces is determined by different couples of materials. Those surfaces create: pile-foundation anchorage, bonding between reinforcement and material from which the pile is formed and pilesoil interface. What is essential is that on the contact surfaces the deformation of materials which adhere to each other can vary and depends on the mechanical properties and geometry of these surfaces. Engineering practice and experimental research point out that the failure in such structures occurs at interfaces. The paper is concentrating on presenting the experiments on interaction between cement grout and various types of steel reinforcement. The tests were conducted on the special low pressure injection piles widely used to strengthen foundations of already existing structures of historical buildings due to the technology of formation and injection pressure.
Źródło:
Studia Geotechnica et Mechanica; 2017, 39, 4; 77-85
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Frictional contact of two solids with a periodically grooved surface in the presence of an ideal gas in interface gaps
Autorzy:
Malanchuk, N.
Slobodyan, B.
Martynyak, R.
Powiązania:
https://bibliotekanauki.pl/articles/280732.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
stick-slip contact
periodically grooved surface
gas pressure
Opis:
The frictional contact between two solids, one of which having a periodically grooved surface, under the action of normal and shear load is investigated. The interface between the contacting solids consists of a periodic array of gas-filled gaps and a periodic array of contact regions, where stick-slip contact occurs. The corresponding plane contact problem is reduced to a set of two singular integral equations. A solution to the contact problem is obtained for a certain shape of the grooves. The analysis of dependences of contact parameters of the solids on the applied load and gas pressure is carried out.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 4; 1181-1192
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of upholstered furniture seat structures on the long-term use comfort
Autorzy:
Wiaderek, Krzysztof
Wiaderek, Iwona
Lange, Julia
Powiązania:
https://bibliotekanauki.pl/articles/24072168.pdf
Data publikacji:
2019
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
seat
upholstered furniture
comfort
contact pressure
foam
Opis:
Wpływ konstrukcji mebli tapicerowanych na komfort w okresie długotrwałego użytkowania. Głównym celem pracy była analiza wpływu zmian konstrukcji siedzisk mebli tapicerowanych na pomiar komfortu mebli nowych oraz po długotrwałym ich użytkowaniu. Badania przeprowadzone były przy użyciu maty sensorowej Force Sensitive Applications z odczytem naprężeń kontaktowych oraz profilowanego wgłębia wciskanego w siedzisko siłą 760 N. Okres 5 letniego, długotrwałego użytkowania zasymulowano działaniem cyklicznego obciążenia 1000N x 25000 powtórzeń. Na podstawie przeprowadzonych analiz uzyskanych wyników badań zaobserwowano niekorzystny wzrost współczynnika dyskomfortu D o około 0,8% przy zaobserwowanym spadku o 12,7 % dla siedziska I i 11,5% dla siedziska II. Oznacza to wzrost odczucia komfortu użytkowania siedzisk I i II w okresie użytkowania. Wiąże się to ze spadkiem sztywności siedzisk. Siedziska o niższej sztywności („bardziej miękkie”) wywołują mniejszy nacisk na ludzkie ciało z uwagi na większą powierzchnię użytkową.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2019, 108; 39--44
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of viscous-elastic properties of a cylindrical sealing element on its sealing ability
Autorzy:
Abbasov, Elkhan
Rustamova, Kaklik
Darishova, Aynur
Powiązania:
https://bibliotekanauki.pl/articles/2055051.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
contact pressure
sealing element
boundary condition
potential energy
functional
Opis:
The stress-strain state of a sealing element in the form of a hollow cylinder is defined with regard to viscous-elastic properties of its material. Based on linear laws of heredity, an analytical formula allowing one to determine the axial load necessary for tightness of the surface of the sealing element and the cylinder wall depending on its physic-mechanical properties and geometrical dimensions is found. Influence of viscous-elastic properties of the material of the sealing element on its sealing ability is realized based on the hypothesis of elastic analogy. The results of numerical calculations are represented in the form of graphs of the external force necessary for achieving sightless. It is shown that viscous-elastic properties of the sealer material greatly influence its sealing ability. Because of heredity of the sealer material, values of the external forces drop in some cases by about five times.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 3; 481--492
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jakość sosny zwyczajnej, buka zwyczajnego i dębu szypułkowego wyhodowanych z siewu na glebie leśnej o różnym stopniu zagęszczenia
Quality of Scots pine, European beech and pedunculate oak grown from sowing on soil with different compaction levels
Autorzy:
Banach, J.
Kormanek, M.
Jazwinski, J.
Powiązania:
https://bibliotekanauki.pl/articles/2142611.pdf
Data publikacji:
2021
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
ground contact pressure
seedling quality
sturdiness quotient
S/R
DQI
nacisk jednostkowy
jakość sadzonek
wskaźnik wytrzymałości
Opis:
In this study, we explore the effect of soil compaction on the growth of seedlings of Scots pine Pinus sylvestris l., European beech Fagus sylvatica L. and pedunculate oak Quercus robur L. On the experimental plots, ground contact pressures ranging from 0 to 250 kPa was applied on the soil. The applied pressure resulted in an increase in soil compaction between 1.02 to 1.19 g cm–3, which reflected pressures exerted by the undercarriage of vehicles used in logging. We then measured the seedlings as well as the dry weight of the roots and the above-ground parts. Using this data, we calculated the following quality indicators for each seedling: SQ – sturdiness quotient, S/R – shoot to root dry mass, DQI – Dickson quality index. For pedunculate oak, the SQ value significantly improved with increasing soil compaction, whereas no differences in the other two indicators were observed. In case of the European beech, the best value of SQ and DQI were observed at a soil density of 1.11 g cm–3, whilst no significant difference for the S/R coefficient could be found. Completely different results were obtained for Scots pine. The most favorable growth was observed when no pressure was applied. However, the SQ and S/R ratios even exceeded the values commonly considered acceptable. Our results therefore indicate that the values of seedling quality indicators are indeed influenced by soil compaction. At a soil compaction of 1.11 g cm–3, the share of seedlings with the SQ value below the critical level was the highest, but a similar relationship could not be confirmed for the other indicators. The response of the seedlings to compaction is likely to be species specific.
Źródło:
Leśne Prace Badawcze; 2020, 81, 4; 167-174
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies