Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "combustion fuels" wg kryterium: Temat


Tytuł:
Microemulsion as a means of NOx reduction in exhaust emission of diesel engines
Autorzy:
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247510.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
engine emissions
internal combustion engine fuels
microemulsions
Opis:
Currently produced internal combustion engines used in transportation, must meet very stringent legislative requirements EURO VI, for the limited emissions of exhaust gases: CO, HC, NOx, PM, PN. One of the most toxic components and the most difficult to eliminate are nitrogen oxides NOx, which currently permissible amount in the exhaust gases shall be 80 mg/km. This result must be achieved, moreover, with the fulfilment of the limits for other exhaust components, and above all, the contents of particulate matter (PM, PN). It should be pointed out, that the mechanisms of the NOx and PM formation are opposed to each other; reduction of the NOx amount is generally associated with an increase in PM and vice versa. Therefore, issues of lowering the amount of NOx in the exhaust gases devote a lot of scientific work and engine research. Currently the most effective method of reducing the NOx is the selective catalytic reduction (SCR), which requires the additional installation of sophisticated equipment in the vehicle. Therefore, methods easier to implement and to operate are sought. One such method is the use of a microemulsion to supply as fuel to diesel engines, consisting of an emulsion of diesel oil, water and surfactant (surface-active compound). The use of the microemulsion results in that already in combustion chamber forms less of NOx, and therefore reduction of NOx in the exhaust system is easier. The publication presents results of SB 3.1 engine research on the engine test bench. The research was comparative in nature and thus, in the first stage of research conducted, the engine was fuelled with diesel oil, then the area of engine load and engine speed characteristics, in which the NOx emissions are greatest, was determined, and next, when engine was fuelled with various microemulsions, the engine investigation was conducted in this area. The microemulsions of diesel fuel and water comprise 10%, 20% and 30% water, selectively. The results of investigations show that, when the engine is fuelled with microemulsions, both NOx and PM, as the main component of diesel engine exhaust - soot (smoke) can be reduced at the same time. The article also discusses the differences between emulsions and microemulsions, and how they influence the combustion in the engine combustion chambers.
Źródło:
Journal of KONES; 2016, 23, 3; 225-232
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the possibilities to achieve adiabatization process of combustion surrounded by inactive gases in Rapid Compression Machine
Autorzy:
Cieślik, W.
Pielecha, I.
Powiązania:
https://bibliotekanauki.pl/articles/134132.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust gas recirculation
inactive gases
combustion fuels
recyrkulacja spalin
nieaktywne gazy
spalanie paliw
Opis:
In this work non-combustible gases impact on combustion processes studies is performed. Research was performed in a optically accessible rapid compression machine (RCM) under spark ignition engine conditions. The distribution of the swirl charge in the relation to adopted for analysis sequence of gas delivery to the chamber was varied with regard to the main injection. Authors investigate the influence of these sequence on the combustion and the ignition delay of the main injection and the overall combustion characteristics. The aim of this work is the experimental recognition of possibilities of creating combustible mixtures of light hydrocarbon fuels surrounded by non-combustible gases affecting the function of the inhibitor. Specifying the ability of preparation and combustion of mixtures in such systems enables the scientifl analysis of adiabatization of the combustion process of fuel-air mixtures in the operating chambers. Theoretical analysis of the issues indicates possibility of obtaining such a stratification of the charge, that the inactive exhaust gases creating the outer ring surround the combustible mixture inside in such a way as to reduce the amount of heat exchanged between the working medium and the walls of the cylinder.
Źródło:
Combustion Engines; 2017, 56, 1; 27-31
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania eksperymentalne współspalania węgla z biomasą, w postaci zawiesin
Experimental studies of coal and biomass co-combustion, in the suspension form
Autorzy:
Kijo-Kleczkowska, A
Powiązania:
https://bibliotekanauki.pl/articles/357501.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska
Tematy:
coal-water slurry
biomass
co-combustion of fuels
fuels combustion
zawiesina węglowo-wodna
biomasa
współspalanie paliw
spalanie paliw
Opis:
Clean coal technologies are currently the biggest challenge for the Polish energy sector, allowing to reduce the negative effect of the combustion of fuels on the environment and energy security of the country. Mining, forced to deliver power better fuel must use deep cleaning of coal. It results increase in waste sludge flotation. The best method of utilisation of these mules is burning them in the form of suspensions and co-combustion with other fuels. This paper takes experimental studies of co-combustion mechanism of coal with biomass in the form of suspensions, carried in a stream of air.
Czyste technologie węglowe stanowią obecnie największe wyzwanie dla polskiej energetyki, umożliwiając ograniczenie negatywnego skutku spalania paliw na środowisko oraz poprawę bezpieczeństwa energetycznego kraju. Górnictwo, zmuszane dostarczać energetyce coraz lepsze paliwo, musi stosować głębsze wzbogacanie węgla. Powoduje to ciągły wzrost odpadów w postaci mułów poflotacyjnych. Najlepszą metodą utylizacji tych mułów jest ich spalanie w postaci zawiesin oraz współspalanie z innymi paliwami. Niniejsza praca podejmuje badania eksperymentalne mechanizmu współspalnia węgla z biomasą w postaci zawiesin, prowadzone w strumieniu powietrza.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2014, 16, 4; 43-62
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A computational software program for determining the combustion temperatures of solid fuels
Autorzy:
Kowalik, M.
Boryca, J.
Powiązania:
https://bibliotekanauki.pl/articles/102184.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
combustion of solid fuels
combustion temperature
computational software
program
Opis:
The combustion temperature is one of parameters influencing the efficiency of combustion process. The analytical, model and design calculations of processes related to fuel combustion and heat exchange intensity require the combustion temperature to be correctly determined. These are, however, complex, and, as a consequence, burdensome and time-consuming requirements. Developing an appropriate software program will considerably streamline the calculation procedure. Based on analytical relationships for the combustion process, a computational software program has been developed within this study, which enables the determination of the calorimetric, theoretical and actual combustion temperatures of solid fuels.
Źródło:
Advances in Science and Technology. Research Journal; 2013, 7, 18; 60-67
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion of coal-mule briquettes
Spalanie brykietów z mułu węglowego
Autorzy:
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/219214.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
brykiety paliwowe
mechanizm i kinetyka reakcji spalania
współspalanie paliw
wizualizacja procesu spalania paliw
briquettes of fuels
mechanism and kinetics of combustion reaction
co-combustion of fuels
visualization of fuels combustion process
Opis:
Combustion technologies coal-mule fuels create a number of new possibilities for organising combustion processes so that they fulfil contemporary requirements (e.g., in terms of the environment protection- related issues). The paper describes the problems of coal-mule fuel combustion that have acquired a wider significance as the quality requirements of coal combustion in power plants have been growing. Coal mines that want to fulfill expectations of power industry workers have been forced to develop and modernize plants of coal wet cleaning. It all results in the growing amount of waste arising in the process of coal wet cleaning which contains smaller and smaller coal undersizes. In this situation the concept of direct combustion of the above mentioned waste and their co-combustion with other fuels, coal and biomass, seems to be attractive. Biomass is one from the most promising sources of renewable energy. The main aim of the paper is to identify the mechanism and kinetics of combustion of coal-mule fuels and their co- -combustion with coal and biomass in the briquettes form based on extensive experimental research in air.
Niekorzystny bilans paliwowy naszego kraju powoduje nadmierne obciążenie środowiska, wywołane emisją CO2, NOx, SO2 i pyłów, a także powiększeniem powierzchni koniecznych na składowanie wciąż narastających stałych odpadów paleniskowych. Górnictwo, od którego energetyka oczekuje coraz lepszego paliwa, musi stosować głębsze wzbogacanie węgla. Powoduje to ciągłą produkcję odpadów w postaci mułów poflotacyjnych. Najlepszą metodą utylizacji tych mułów jest ich spalanie w postaci zawiesin, a także ich współspalanie z innymi paliwami, węglem czy biomasą. Biomasa jest bowiem jednym z najbardziej obiecujących źródeł OZE, a jej współspalanie z paliwami węglowymi znajduje w ostatnich latach coraz szersze zastosowanie zarówno w kraju, jak i na świecie. W tej sytuacji istotne jest prowadzenie badań naukowych, mających na celu identyfikację przebiegu procesu spalania paliw, utworzonych nie tylko z mułów poflotacyjnych, ale również z mieszaniny mułów węglowych oraz pyłów węgla i biomasy. Niniejsza praca podejmuje mechanizm i kinetykę spalania oraz współspalania wspomnianych paliw w postaci brykietów, prowadzonego w strumieniu powietrza.
Źródło:
Archives of Mining Sciences; 2013, 58, 3; 617-628
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Specyfika spalania osadów ściekowych
Specificity combustion of sewage sludge
Autorzy:
Kijo-Kleczkowska, A
Otwinowski, H
Środa, K
Powiązania:
https://bibliotekanauki.pl/articles/357162.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska
Tematy:
sewage sludge
kinetics
fuels combustion
osady ściekowe
kinetyka
spalanie paliw
Opis:
The paper takes the issue of how the disposal of sewage sludge with particular regard to their combustion, as a priority method of disposal. The development of civilization leads to more and more waste. In Poland, in the years 1999-2012, the amount of sewage sludge from municipal sewage treatment plants, rose almost one and a half. There is the problem of the use of this waste, even associated with increasingly restrictive legal provisions on the storage of sewage sludge since 2016. Given that it is currently working in Poland until 11 installations using sewage sludge as a fuel is to anticipate the further development of these technologies. Combustion of sewage sludge is an attractive solution their utilization, mostly because of the minimization of odor, a significant reduction in the volume of the starting material, the possibility of further use of the ash, and the thermal destruction of the organic and toxic components of the waste. A similar calorific value of sewage sludge to lignite, justifies the need to use the waste as fuel energy. The paper presents the results of the combustion of sewage sludge and hard coal, brown coal and biomass in a stream of air.
Praca podejmuje tematykę związaną z unieszkodliwianiem osadów ściekowych, ze szczególnym uwzględnieniem procesu spalania, jako priorytetowej metody ich utylizacji. Rozwój cywilizacji prowadzi do powstawania coraz większej ilości odpadów. W Polsce, w latach 1999-2012, ilość osadów ściekowych z komunalnych oczyszczalni ścieków wzrosła prawie półtorakrotnie. Problem związany z tymi odpadami nabiera coraz większego znaczenia. Wynika to z restrykcyjnych przepisów dotyczących składowania osadów ściekowych od 2016 roku. Biorąc pod uwagę, że obecnie w Polsce istnieje aż 11 obiektów wykorzystujących osady ściekowe jako paliwo można przewidzieć dalszy rozwój tych technologii. Spalanie osadów ściekowych jest atrakcyjnym rozwiązaniem ich wykorzystania, przede wszystkim ze względu na minimalizację odoru, znaczne zmniejszenie ilości materiału wyjściowego oraz możliwość dalszego wykorzystania popiołu. Ponadto możliwa jest destrukcja termiczna organicznych i toksycznych składników tych odpadów. Poza tym zbliżona wartość opałowa osadów ściekowych do węgla brunatnego, uzasadnia konieczność wykorzystania tych odpadów jako paliwa energetycznego. W pracy przedstawiono wyniki spalania osadów ściekowych, węgla kamiennego, węgla brunatnego i biomasy w strumieniu powietrza.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2014, 16, 4; 93-102
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigation into coal-biomass-water fuels combustion in a circulating fluidized bed
Badania eksperymentalne spalania paliw węglowo-biomasowo-wodnych w cyrkulacyjnej warstwie fluidalnej
Autorzy:
Kijo-Kleczkowska, A.
Kosowska-Golachowska, M.
Luckos, A.
Środa, K.
Powiązania:
https://bibliotekanauki.pl/articles/357468.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska
Tematy:
coal-biomass-water fuels
fuels combustion
circulating fluidized bed
paliwa węglowo-biomasowo-wodne
spalanie paliw
cyrkulacyjna warstwa fluidalna
Opis:
Coal upgrading processes (screening, washing etc.) generate large quantities of fine and ultra-fine coal particles usually in the form of coal-water slurries. Utilization of these waste-coals is a preferable option to their disposal and offers opportunities for adding value. Direct combustion of coal slurries can eliminate troublesome dewatering and drying processes. Combustion or co-combustion of coal slurries with other fuels (higher quality coal, biomass) in circulating fluidized-bed (CFB) boilers is the best option for their utilization. High combustion efficiencies can be achieved provided that the combustion process is properly designed to take into account the unique properties of the fuel. Because biomass is considered as a carbon-neutral fuel, co-combustion of coal slurries with biomass can lower the CO2 footprint and decrease the cost of electricity. This paper describes the results of experiments carried out in a laboratory-scale CFB combustor with coal-biomass-water fuels. It has been found that the combustion time and ignition temperature decrease with an increase in the biomass content in the fuel and the superficial gas velocity.
Niekorzystny bilans paliwowy naszego kraju powoduje nadmierne obciążenie środowiska, wywołane emisją NOx, SO2, CO2 i pyłów, a także powiększeniem powierzchni koniecznych na składowanie narastających stałych odpadów paleniskowych. Górnictwo, zmuszane dostarczać energetyce coraz lepsze paliwo, musi stosować głębsze wzbogacanie węgla. Powoduje to ciągły wzrost odpadów w postaci mułów poflotacyjnych. Najlepszą metodą utylizacji tych mułów jest ich spalanie w postaci zawiesin oraz współspalanie z innymi paliwami, prowadzone przede wszystkim w kotłach fluidyzacyjnych. Z drugiej strony, rozwój technologii wykorzystania biomasy na cele energetyczne daje szereg przyszłościowych korzyści. Biomasa jest jednym z najbardziej obiecujących źródeł energii odnawialnej w Polsce, a jej współspalanie z węglem znajduje w ostatnich latach coraz szersze zastosowanie, zarówno w Polsce, jak i na świecie. Praca podejmuje wyniki badań eksperymentalnych współspalania węgla z biomasą w postaci zawiesin w warunkach cyrkulacyjnej warstwy fluidalnej. Stwierdzono m.in. skrócenie czasu spalania paliwa oraz obniżenie temperatury jego zapłonu za pośrednictwem części lotnych, w miarę wzrostu zawartości biomasy w zawiesinie.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2014, 16, 2; 85-92
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości i konsekwencje zastosowania zawiesiny węglowo-wodnej jako paliwa alternatywnego do zasilania silników Diesla
The possibilities and consequences of the use of coal-water slurry as an alternative fuel to power diesel engines
Autorzy:
Borkowski, J.
Szada-Borzyszkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/314444.pdf
Data publikacji:
2014
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
spalanie paliw
paliwa alternatywne
paliwa węglowo-wodne
silnik Diesla
emisja substancji szkodliwych
combustion of fuels
alternative fuels
coal-water fuels
diesel engine
emission of harmful substances
Opis:
W artykule omówione zostały zagadnienia spalania paliw w silnikach samochodowych a w szczególności w silnikach Diesla. Zwrócono również uwagę na zagrożenia dla środowiska naturalnego wynikające ze spalania paliw w silnikach samochodowych. Omówiono czynniki jakie powinno spełniać paliwo alternatywne stosowane do zasilania silników. Przedstawiono rodzaje paliw alternatywnych stosowanych obecnie do zasilania współczesnych samochodów. Szczególną uwagę poświęcono możliwościom zastosowania zawiesiny węglowo-wodnej jako paliwa alternatywnego do zasilania silników Diesla. Jednak stosowanie takiego paliwa węglowo-wodnego narzuca konieczność dokonania niezbędnych modyfikacji konstrukcyjnych silnika oraz jego osprzętu. Scharakteryzowano właściwości takiej zawiesiny (wielkość ziaren węgla, lepkość i stabilność) oraz korzyści jakie mogą wynikać z zastosowania nowego rodzaju quasi-płynnego paliwa alternatywnego.
The paper presents some problems concerning fuel burning in vehicles’ engine especially including diesel one. Environmental risk aspects are given as a consequence of burning processes and basing on that one can find a description of factors defining such kind of alternative fuel too. Different kind of such alternative fuels are presented in the paper, especially possibilities of coal-water slurry application for diesel engine are discussed in. One should also have in mind that application of such coal-water fuel forces necessity of engine construction and adequate equipment modification. Characteristics of such slurry (coal grains’ size, viscosity and stability) as well as advantages that may occur in consequence of its usage are finally described in.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2014, 15, 6; 72-75
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of combustion process of sewage sludge in reference to coals and biomass
Analiza przebiegu procesu spalania osadów ściekowych w odniesieniu do paliw węglowych oraz biomasy
Autorzy:
Środa, K.
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/219878.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
osady ściekowe
węgiel
biomasa
kinetyka spalania paliw
sewage sludge
coal
biomass
kinetics of fuels combustion
Opis:
Production of sewage sludge is an inseparable part of the treatment process. The chemical and sanitary composition of sewage sludge flowing into the treatment plant is a very important factor determining the further use of the final product obtained in these plants. The sewage sludge is characterized by heterogeneity and multi-components properties, because they have characteristics of the classical and fertilizer wastes and energetic fuels. The thermal utilization of sewage sludge is necessary due to the unfavorable sanitary characteristics and the addition of the industrial sewage. This method ensures use of sewage sludge energy and return of expenditure incurred for the treatment of these wastes and their disposal. Sewage sludge should be analyzed in relation to conventional fuels (coals and biomass). They must comply with the applicable requirements, for example by an appropriate degree of dehydration, which guarantee the stable and efficient combustion.
Produkcja osadów ściekowych jest nierozłącznym elementem procesu oczyszczania ścieków. Skład chemiczny oraz sanitarny ścieków dopływających do oczyszczalni jest niezwykle istotnym czynnikiem determinującym dalsze wykorzystanie produktu finalnego uzyskiwanego w tych zakładach. Osady charakteryzuje niejednorodność oraz wieloskładnikowość, dlatego posiadają one cechy zarówno klasycznego odpadu czy nawozu, a także wartościowego paliwa energetycznego. Termiczna utylizacja osadów ściekowych jest niezbędna ze względu na niekorzystne ich cechy sanitarne, jak również dodatek ścieków przemysłowych. Ten sposób zagospodarowania osadów gwarantuje wykorzystanie zawartej w nich energii oraz zwrot nakładów finansowych poniesionych na obróbkę tych odpadów i ich zbyt. Osady ściekowe powinno się analizować w odniesieniu do tradycyjnych paliw (węgli oraz biomasy). Muszą one spełniać stosowne wymagania, poprzez np. odpowiedni stopień odwodnienia, gwarantujące ich stabilne i sprawne spalanie. Niniejszy artykuł podejmuje problematykę przebiegu procesu spalania osadów ściekowych o różnych własnościach, w postaci granulatu, w odniesieniu do paliw węglowych oraz biomasy.
Źródło:
Archives of Mining Sciences; 2016, 61, 2; 425-442
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conversion of diethylamine into nitrogen oxides during combustion in chemically active fluidized bed
Konwersja dietyloaminy do tlenków azotu podczas spalania w aktywnym chemicznie złożu fluidalnym
Autorzy:
Kowarska, B.
Żukowski, W.
Baron, J.
Powiązania:
https://bibliotekanauki.pl/articles/127162.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
nitrogen oxides emission
fluidised bed combustion
alternative fuels combustion
biomass combustion
emisja tlenków azotu
spalenie w złożu fluidalnym
spalanie paliw alternatywnych
spalanie biomasy
Opis:
Combustion processes of gaseous fuel (propane) without and with addition of various amounts of diethylamine in fluidized bed, made of chemically active calcium oxide, were run and studied. On the basis of registered temperature, dynamic pressure in reaction zone and composition of exhaust fumes, analysis of diethylamine conversion into nitrogen oxides and its influence on kinetics of propane combustion process was carried out. The complexity of solid fuels (alternative or biomass which can contain large amount of nitrogen compounds in a form of amines, heterocyclic compounds, amino acids etc.) combustion caused that at this phase of researches, incineration of gaseous fuel was run. Amine was dosed into the reaction zone in such amounts, which could give similar nitrogen oxides concentration in exhaust fumes, to those registered from combustion of alternative fuels with high nitrogen content (circa: 900, 1800, 3250 ppm). Results of experimental works revealed that up to 78% of nitrogen compound was converted to NxOy. The conversion rate was higher when greater amounts of (C2H5)2NH were dosed into reaction zone. The main nitrogen oxide created within combustion was nitric oxide, which constituted more than 95% of total NxOy. The remaining amount of amine was converted into nitrogen. (C2H5)2NH influenced on kinetics of the propane combustion process in noticeable way, but this impact was also limited. Diethylamine and products of its conversion, such as radicals present in the combustion zone, influenced on oxidization reactions of carbon monoxide and volatile organic compounds.
Przeprowadzono i przeanalizowano procesy spalania paliwa gazowego (propanu) bez oraz z dodatkiem różnych ilości dietyloaminy, w złożu fluidalnym zbudowanym z chemicznie aktywnego tlenku wapnia. Na podstawie temperatury, ciśnienia dynamicznego w strefie reakcji oraz składu spalin dokonano analizy procesów konwersji dietyloaminy do tlenków azotu i jej wpływu na kinetykę procesu spalania propanu. Złożoność procesu spalania paliw stałych (alternatywnych lub biomasy, które mogą zawierać wysoką ilość związków azotu w postaci amin, związków heterocyklicznych, aminokwasów itp.) spowodowała, że na tym etapie badań zdecydowano się na przeprowadzenie spalania paliwa gazowego. Aminę dozowano do strefy reakcyjnej w takich ilościach (około: 900, 1800, 3250 ppm), które mogłyby dawać stężenia tlenków azotu w spalinach podobne do rejestrowanych podczas spalania paliw alternatywnych o dużej zawartości azotu. Wyniki badań wykazały, że do 78% związku azotowego ulegało konwersji do NxOy. Stopień konwersji był większy, gdy większe ilości (C2H5)2NH dozowano do strefy reakcji. Głównym tlenkiem azotu utworzonym podczas spalania był tlenek azotu(II), który stanowił ponad 95% całkowitej ilości NxOy. Pozostała amina była przekształcana do azotu. Stwierdzono zauważalny, ale ograniczony wpływ (C2H5)2NH na kinetykę procesu spalania propanu. Dietyloamina i produkty jej konwersji, takie jak rodniki obecne w strefie spalania, wpływały na reakcje utleniania tlenku węgla i lotnych związków organicznych.
Źródło:
Proceedings of ECOpole; 2015, 9, 1; 103-110
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza porównawcza węgla kamiennego, biomasy oraz osadu ściekowego wykonana w oparciu o termograwimetrię (TG) oraz spektrometrię mas (MS)
TG/MS comparative thermal analysis of coal, biomass and sewage sludge in a He atmosphere and air
Autorzy:
Kijo-Kleczkowska, A.
Łącz, A.
Szumera, M.
Środa, K.
Powiązania:
https://bibliotekanauki.pl/articles/357495.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska
Tematy:
piroliza paliw
spalanie paliw
emisja zanieczyszczeń
analiza termiczna (TG)
spektrometria mas MS
fuels pyrolysis
emission of pollutants
fuels combustion
thermal analysis TG/MS
Opis:
Praca podejmuje analizę badań termicznych (TG) sprzężonych ze spektrometrią mas (MS) różnego rodzaju paliw stałych. Umożliwia ona zróżnicowanie paliw w zależności od ich składu i pochodzenia. Rozpatrywanie węgla, biomasy i osadów ściekowych jako paliw stanowi obecnie ważny aspekt energetyczny naszego kraju. Należy podkreślić, że Polska energetyka bazuje aż w 95% na węglu jako paliwie podstawowym. Jednak powszechnie narastająca świadomość stanu środowiska naturalnego oraz konieczność ograniczenia emisji CO2 zobligowały przemysł energetyczny do wdrażania alternatywnych rozwiązań w celu pozyskania energii, poprzez m.in. rozwój technologii wykorzystania biomasy, która jest jednym z najbardziej obiecujących źródeł energii odnawialnej w Polsce. Z przyczyn legislacyjnych, ekologicznych oraz technicznoekonomicznych niezwykle istotne stają się również termiczne metody utylizacji odpadów, w tym również osadów ściekowych. W pracy zaprezentowano wyniki badań TG/MS węgla kamiennego, osadu ściekowego oraz biomasy (wierzby energetycznej) wykonane w atmosferze helu i w powietrzu. Stanowią one cenne porównanie emisyjności paliw w wysokotemperaturowych warunkach pirolizy oraz spalania. Każde z tych paliw wykazuje bowiem określoną specyfikę odgazowania oraz spalania, wpływając na kinetykę i mechanizm procesu. W wyjaśnieniu zachowania się paliw podczas wysokotemperaturowego fizykochemicznego procesu bardzo pomocna staje się analiza techniczna i elementarna paliw, wskazująca na zróżnicowanie ich składu w stanie wyjściowym.
The paper takes the analysis of thermal studies TG/MS of different types of solid fuels. It allowed diversification of fuels depending on their composition and origin. Consideration of coal, biomass and sewage sludge as fuel is nowadays an important aspect of energy in our country. It should be emphasized that Poland power engineering is based up to 95% on coal as the primary fuel. However, commonly increasing awareness state of the environment and the need to reduce CO2 emissions energy industry have committed to implement alternative solutions in order to gain power, through, i. a.:development technologies use of biomass, which is one of the most promising renewable energy sources in Poland. For reasons of legislative, environmental and technical-economic extremely important become also the method of thermal disposal waste, which could include also sewage sludge. The paper presents the results of TG/MS research of hard coal, sewage sludge and biomass (energetic willow), in a He atmosphere and air. Each of these fuels has a definite specificity of pyrolysis and combustion, affecting on the kinetics and mechanism of the process. In explanation for behavior of fuels during high-temperature physicochemical process really helpful becomes their technical analysis, elemental and petrographic fuels.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2015, 17, 3; 41-60
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the engine fuels impact on carbon dioxide emissions
Autorzy:
Worsztynowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/247066.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engine
combustion
engine fuels
emission
carbon dioxide
Opis:
The article addresses the topic of carbon dioxide emissions into the atmosphere as the result of the hydrocarbon fuels combustion in the combustion engines. Widespread use of individual means of transportation, where the combustion engines function as the basic propulsion source, has caused that they are one of the main sources of carbon dioxide emission into the atmosphere. Therefore, it has been subjected to some restrictions, similar to those applied towards toxic elements contained with exhaust. One of the most effective ways of restriction of carbon dioxide emission is to decrease fuel consumption. In addition, an important item is the implementation of fuels with less potential to create carbon dioxide as a result of their combustion. The article presents the results of comparative measurements conducted on the engine test stand in terms of prepared load characteristics for a spark ignition engine powered by gasoline as well as by natural gas. On the basis of these measurements the article provides the analysis of the impact of fuel composition and combustible mixture on carbon dioxide content in the exhaust gases. In the next stage of analysis, the criterion for the comparison was the value of carbon dioxide emission with reference to 1 kg of fuel resulting from the measurements and theoretical calculations of fuel combustion. The results of measurements and calculations were shown in forms of graphs. The measurements on a test stand were conducted for the engine of the older generation, whose design corresponds to the motors located in a large number of currently used vehicles. This allows a preliminary estimation of the carbon dioxide emissions coming from means of transport.
Źródło:
Journal of KONES; 2011, 18, 4; 571-575
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Miller cycle based IC engine fuelled with a CNG/hydrogen
Autorzy:
Grab-Rogaliński, K.
Szwaja, S.
Tutak, W.
Powiązania:
https://bibliotekanauki.pl/articles/246306.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
hydrogen
miller cycle
gaseous fuels
combustion engines
Opis:
The results of research conducted on a supercharged spark ignition gaseous engine are exposed in the paper. The engine was modified to work as an engine with the Miller cycle. Modification of the engine, that allowed it to work in the Miller cycle, dealt particularly with the camshaft. This modification allows changing both intake and exhaust timings independently with limitations of ±20 deg. During the research, the engine was fuelled with compressed natural gas or hydrogen optionally. It was for making comparison between selected engine parameters, while the engine was working on two significantly different fuels. Both fuels were delivered to intake manifold close to intake valve through a fuel mixer. During the research, pressure data was collected with various both spark ignition timings and equivalence ratios, and boost pressures. On the basis of obtained data the parameters as follows: indicated mean effective pressure, coefficient of variance from the indicated mean effective pressure, Normalized Mass Fraction Burn and Heat Release Rate were calculated and discussed. As observed optimal ignition, timing is advanced for the engine working on hydrogen or natural gas as fuel with the Miller cycle when compared to the classic Otto cycle applied to this engine. In all tests of the engine with the Miller cycle coefficient of variance from the indicated mean effective pressure indicates good stability of engine work. Finally, the engine working on hydrogen is characterized by shorter combustion period that resulted from higher laminar flame speed compared to the natural gas fuelled engine.
Źródło:
Journal of KONES; 2014, 21, 4; 137-144
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New European biofuels for diesel engines
Autorzy:
Sitnik, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/243532.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
combustion engines
alternative fuels
biofuels
butanol
Opis:
The World is strongly dependent on crude oil for its transport needs. In order to diminish this dependence, we need to introduce clean, CO2-efficient, secure and affordable transportation fuels. The development of innovative biofuel technologies will help to cover significantly (up to 25% in Europe) road transport fuel needs. Biofuels production of 33 billion litres in 2004 is small compared to 1200 billion litres of gasoline produced annually worldwide. The current production of liquid biofuels in the EU 25 is about 2 Mtoe, which is less than 1% of the market. Recent assessments have concluded that the 2010 targets, 18 Mtoe used in the transport sector, are unlikely to be achieved. There can be three basic possibilities of accomplishing this target: i) use of alcohols (first of all ethanol) and their mixing with petrol; ii) use of fatty acids esters (methyl or ethyl) of vegetable oils and their mixing with diesel fuel, iii) use of synthetic hydrocarbons of the synthetic gas coming from biomass resources and eventually their mixing with other ,,classical" hydrocarbons. This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with conventional diesel fuel. The possibility to use a mix of butanol (as heavy alcohol) with conventional diesel fuel is demonstrated. Butanol has some key advantages over ethanol and light hydrocarbons (petrol), including higher energy content and better transport characteristics. Moreover, butanol is hydrophobic, so a new logistic infrastructure is not necessary. This paper demonstrates that a diesel-butanol fuel mixture is supplied to a diesel engine without any problems. A consumption of proposed biofuel mixture from +35% to -35% of typical diesel fuel depends on many factors not only on fuel energy density. A near-term effort of BP Biofuels and DuPont to develop and commercialize biobutanol is well-known. Here, it is proposed a new technological process combining electricity generation in fuel cells with electrolysis and a production of butanol from ethanol, which gives an opportunity to reduce today,'s over production of ethanol without a necessary change of existing infrastructure.
Źródło:
Journal of KONES; 2008, 15, 3; 487-491
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of combustion process with the use of ANSYS FLUENT code
Autorzy:
Kowalski, M.
Jankowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/245622.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
liquid fuels
combustion processes
turbulent flow
combustion process model
ANSYS FLUENT
Opis:
The article presents the modelling of the combustion process of liquid fuels using professional ANSYS FLUENT software. This program allows modelling the dynamics of compressible and incompressible, laminar and turbulent flows as well as heat exchange phenomena with occurrence and without chemical reactions. The model presented in the article takes into account the influence of the gas phase on the liquid phase during the fuel combustion process. The influence of velocity and pressure of the flowing gas and the type of flow has a significant impact on the combustion of liquid fuels. The developed model is fully reliable and the presented results are consistent with experimental research. The occurrence of a laminar sublayer in a turbulent flow was confirmed, and the thickness of this layer and the turbulent layer significantly influences the course of the combustion process. The use of the flat flow model reflects the basic phenomena occurring during the combustion of liquid fuels under turbulent conditions. The use of the program for flows with different flow velocity profiles is justified. It gives important information about the processes taking place during the combustion of liquid fuels. The results of numerical tests are presented graphically. The article presents graphs of velocity field, absolute pressure, power lines, temperature and density.
Źródło:
Journal of KONES; 2018, 25, 4; 175-186
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of combustion process in dual fuel diesel engine
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247295.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
air pollution
environmental protection
alternative fuels
combustion
Opis:
In this paper are presented results of dual fuel diesel engine bench testing carried out by author. The engine was fuelled parallel with two fuels. The second, additional fuel was compressed natural gas (CNG). CNG was injected into engine inlet system before inlet to engine turbocharger. There was installed a pressure transducer in one of engine cylinders and cylinder pressure was registered at the time of testing. There is discussed place and way of pressure sensor installation and impact on quality of indicating signals of the channel connecting the transducer with combustion chamber. The carried out investigations included measurement of emissions and engine indicating completed with the heat release characteristics. There was considered influence of CNG on CO, NOx, THC and NMHC emissions, especially how pollutant emissions depend on the share of methane in fuel. The effect of using natural gas as an additional fuel injected to regular CI engine on heat release rate was investigated, as well as its rate and duration. Discussed the differences between combustion of methane and diesel oil and ways of spreading flames into air-fuel mixture for these two mixed fuels The processes of combustion of diesel oil and methane are totally different. The study searches for the limits of methane content due to knocking combustion. Additive of methane to the diesel fuel is a reason of retarded heat release, decrease of engine efficiency, greater fuel consumption and changes in emissions corresponding to the lag of self-ignition
Źródło:
Journal of KONES; 2014, 21, 2; 303-309
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tyre pyrolysis oil as an engine fuel
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247415.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
air pollution
environmental protection
alternative fuels
combustion
Opis:
Tests have been carried out to evaluate the performance, emissions and heat release characteristics of a double cylinder direct injection diesel engine fuelled with tyre pyrolysis oil and diesel oil. The combustion parameters such as heat release rate, cylinder peak pressure, maximum rate of cylinder pressure, combustion knocking were also analysed. For purposes of this work raw pyrolysis oil was derived from waste vehicle tyres through vacuum pyrolysis realized in experimental installation. Results showed that the brake thermal efficiency of the engine fuelled with pyrolysis oil increased. THC, CO and CO2 emissions were found to be higher due to high aromatic content and longer ignition delay, whereas NOx shows increasing tendency due to greater heat release rate. The cylinder peak pressure did not change. The ignition delay became greater what can be the reason of problems with combustion knocking. Pyrolysis oil has a mass fraction of individual elements similar to diesel fuel but the chemical composition of hydrocarbons included in these fuels is different. The product of pyrolysis contains too much soot, sulphur, light and heavy hydrocarbons fractions for direct using it in engine. Aromatics content gives this fuel a distinctive smell. Pyrolysis oil is toxic and dangerous in use due to the polycyclic aromatic hydrocarbons (PAH). However raw pyrolysis oil is not suitable to use it as a CI fuel and requires additional distillation before using it in diesel engines as an alternative fuel in the future.
Źródło:
Journal of KONES; 2014, 21, 1; 295-302
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of unburnt hydrocarbon emissions for diesel engines fueled by diesel oil and rapeseed fuel
Autorzy:
Rusin, M.
Powiązania:
https://bibliotekanauki.pl/articles/245894.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
CI internal combustion engines
motor fuels
alternative fuels
toxic exhaust emissions
Opis:
The article presents the results of the of the HC emissions composition for the compression ignition - diesel engine fuelled with rapeseed fuel (a mixture of methyl esters of fatty acids - RSME). The investigations were conducted on a turbocharged, four-cylinder compression-ignition engine type T370 (of 80 hW power at 2400 rpm engine speed and maximum torque of 400 Nm at 1440 rpm engine speed, with bore/stroke 110 mm /l20 mm, displacement volume 4560 cm3, compression ratio 17). For the exhaust toxicity investigations the eauipment of Signal and AVL companies was used, and for composition of nonregulated hydrocarbons emissions investigations the Hewlett Packard Company chromatograph type HP-5890II was used. The investigations were conducted under engine full load at maximum torque speed and for engine rotational speed of the rated power. Chromatographic test for emissions were collected using special equipment and special procedures. The article presents the results of chromatographic investigations focusedon: benzene, toluene and acetaldehyde. It was found that the percentage of emission of individual components in the total emissions of HC was independent of the fuel used. However, due to the fact that in the case of rape fuel, emission of unburned HC was smaller and smaller were the absolute amounts of emissions components. Thus, emissions from combustion of rape fuel are less harmful than emissions from the engine fuelled with diesel oil.
Źródło:
Journal of KONES; 2009, 16, 4; 549-555
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of non-converted vegetable oils in contemporary self-ignition engines
Autorzy:
Reksa, M.
Powiązania:
https://bibliotekanauki.pl/articles/245366.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
vegetable oils
diesel engine
alternative fuels
Opis:
The paper presents a test of a self-ignition engine equipped with high-pressure fuel-dosing system based on injection units with electronic control system. The engine was fuelled with conventional fuel and few kinds of non-converted vegetable oil. The analysis of the experiment results correlated with knowledge of their properties shows the important conclusions about possibilities, disadvantages and perspectives of the fuels usage in contemporary engines equipped with electronic control fuel-dosing system. The vegetable oils have a special place in history of automotive industry. In 1900 a great event on Word Trades in Paris was compression-ignition engine fuelled by groundnuts oil — a masterpiece of no one else like Rudolf Diesel. R. Diesel, aware of conventional fuels limitation, patented in 1892 a vegetable oil as a fuel. The NOx concentration in exhaust was measuredfor maximum engine speed (1900 rpm). The lowest emission ofmeasured compounds was observed in case of sunflower oil and rape oil "Biedronka" (65% and 75% of emission during engine work fuelled by conventional diesel oil). The highest values were detected for post frying palm oil and rape oil "Aldi" (120% of emission during engine work fuelled by conventional diesel oil).
Źródło:
Journal of KONES; 2009, 16, 4; 385-391
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An effect of physical and chemical properties of commercial diesel fuels on engine parameters
Autorzy:
Sroka, Z. J.
Reksa, M.
Kułażyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/242752.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
diesel engine
engine fuels engine performances
Opis:
This paper is focused on problem of quality of diesel commercial fuels in Polish market and an effect of their properties as well on engine parameters as environment The academic staff from Wrocław University of Technology put the own experience to the huge discussion by making research in the Wroclaw-city, where some probes of fuels were taken from six different commercial fuel stations. Chemical and physical properties of fuels were checked. A real diesel engine VW 1,9 TDI was investigated in university lab of Division of Motor Vehicles and Internal Combustion Engines. Typical engine performances were built including power, torque, fuel consumption, toxicity levels due to different fuels. The IC engine on the test bench, oxygen content in fuels, example of full load performance of VW1,9 TDI for fuel Bio D20-type, differences of mean effective pressure for different fuels, differences of carbon monoxide in exhaust for different fuels, differences of nitric oxides in exhaust for different fuels, differences of smog level in exhaust for different fuels, differences of heat release for different fuels, relation between engine torque and oxygen content in fuels vs. engine rotation are presented in the paper.
Źródło:
Journal of KONES; 2007, 14, 4; 447-452
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research and development of combustion engine for micro - cogeneration unit
Autorzy:
Polóni, M.
Lach, J.
Chríbik, A.
Powiązania:
https://bibliotekanauki.pl/articles/246631.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine optimisation
micro-cogeneration unit
alternative fuels
Opis:
The paper deals with research and development of original small-size internal combustion engine Lombardini LGW 702. This engine was optimised for application in micro-cogeneration unit (MCU), equipped with variable-speed generator and electronic converter. The electronically controlled combustion engine in MCU works in a regime depending on the load of the generator. It has the lowest possible number of revolutions and minimum possible fuel consumption. The generator combines directly with the crankshaft of the engine. To reach stable parameters of the network, the power electronics controls and processes the variable frequency of the generator. A combustion engine powered by natural gas can utilise also a blend of natural gas and hydrogen and other alternative fuels produced from renewable sources of energy, e.g. synthesis gases. A comparison of engine parameters was made, namely parameters of engines powered by the above-mentioned alternative fuels, such as syngas, coke-oven gas, landfill gas, sewer gas, Hythane and natural gas. A new three-phase variable-speed generator and converter for micro-cogeneration unit were developed. The rated electric power of MCU is 4 kW. The power overload is 80%, compared to rated power. In the case of natural gas, the best electric efficiency is 25%, the thermal efficiency is 65% and the total efficiency of MCU is more than 90%.
Źródło:
Journal of KONES; 2012, 19, 2; 411-422
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of the emission characteristics of a dual-fuel gas turbine combustion chamber operating simultaneously on liquid and gaseous fuels
Autorzy:
Serbin, Serhiy
Diasamidze, Badri
Gorbov, Viktor
Kowalski, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/1573591.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
gas turbine engine
dual-fuel combustion
combustion chamber
liquid and gaseous fuels
Opis:
This study is dedicated to investigations of the working process in a dual-fuel low-emission combustion chamber for a floating vessel’s gas turbine. As the object of the research, a low-emission gas turbine combustion chamber with partial premixing of fuel and air inside the outer and inner radial-axial swirls was chosen. The method of the research is based on the numerical solution of the system of differential equations which represent the physical process of mass and energy conservation and transformations and species transport for a multi-component chemically reactive turbulent system, considering nitrogen oxides formation and a discrete ordinates model of radiation. The chemistry kinetics is presented by the 6-step mechanism of combustion. Seven fuel supply operating modes, varying from 100% gaseous fuel to 100% liquid fuel, have been analysed. This analysis has revealed the possibility of the application of computational fluid dynamics for problems of dual-fuel combustion chambers for the design of a floating vessel’s gas turbine. Moreover, the study has shown the possibility of working in different transitional gaseous and liquid fuel supply modes, as they satisfy modern ecological requirements. The dependencies of the averaged temperature, NO, and CO concentrations along the length of the low-emission gas turbine combustion chamber for different cases of fuel supply are presented. Depending on the different operating modes, the calculated emission of nitrogen oxides NO and carbon monoxide CO at the outlet cross-section of a flame tube are different, but, they lie in the ranges of 31‒50 and 23‒24 mg/nm3 on the peak of 100% liquid fuel supply mode. At operating modes where a gaseous fuel supply prevails, nitrogen oxide NO and carbon monoxide CO emissions lie in the ranges of 1.2‒4.0 and 0.04‒18 mg/nm3 respectively.
Źródło:
Polish Maritime Research; 2021, 2; 85-95
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania eksperymentalne zmian emisyjności NOx i SO2 w procesie spalania brykietów z węgla kamiennego i biomasy
Experimental study of SO2 and NOx emission during the combustion process of hard coal and biomass briquettes
Autorzy:
Górecka-Zbrońska, A.
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/357516.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska
Tematy:
współspalanie paliw
węgiel kamienny
biomasa
emisja NOx
emisja SO2
fuels co-combustion
hard coal
biomass
NOx emission
SO2 emission
Opis:
W pracy zaprezentowano wyniki badań eksperymentalnych procesu spalania węgla kamiennego z różnymi rodzajami biomasy, w postaci kulistych brykietów, stanowiących mieszankę paliwową. Celem badań było ustalenie oddziaływania udziału biomasy w paliwie i jego uwęglenia na emisję spalin, powstałych podczas procesu współspalania paliw w strumieniu powietrza. Do przeprowadzenia badań wykorzystano rotalno–uniformalny plan badań PS/DS-P:λ (λ), który dzięki równoczesnej odpowiedniej zmianie przyjętych wejściowych parametrów procesu umożliwił uchwycenie interakcji między nimi. Na podstawie uzyskanych wyników badań stwierdzono, że istnieje możliwość wyznaczenia udziału danego rodzaju biomasy w mieszance paliwowej z węglem kamiennym, wpływającego na optymalną wartość emisji NOx i SO2 w procesie współspalania.
The experimental results of hard coal and biomass co-combustion are presented in the paper. The aim of research was to explain the influence of biomass and carbon participation in fuel-mixture (in briquette form) on NOx and SO2 emission during fuels co-combustion in air. The “rotal” and “uniformall” schedule PS/DS-P:λ (λ) was used in the research. The analysis of results showed that it is the optimal participation of different types biomass in fuel-mixture (biomass and hard coal) on the values of NOx and SO2 emission during co-combustion of hard coal and biomass.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2015, 17, 1; 77-87
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Volume contraction in the process of combustion of various fuels in combustion engines
Kontrakcja w procesie spalania różnych paliw w silniku spalinowym
Autorzy:
Worsztynowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/134236.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engine
combustion
contraction
engine fuels
silnik spalinowy
spalanie
kontrakcja
paliwa silnikowe
Opis:
The paper discusses the issues related to the change of volume of the reagents during the process of combustion. The formulas that were necessary to make the calculations were derived for liquid and gaseous fuels. Based on the formulas, theoretical calculations of the change of the kilo-mole number for various fuels depending on the mixture composition were performed. The results of the calculations were presented in the tables. Further, the influence of volume contraction on the parameters of the combustion process was analyzed. In the conclusions, a comparison of the influence of the previously described phenomena on the individual fuels was performed in relation to their chemical composition and the composition of the mixture.
W artykule poruszono zagadnienia związane ze zjawiskiem zmiany objętości reagentów podczas procesu spalania. Wyprowadzono konieczne do obliczeń wzory dla paliw ciekłych i gazowych, na podstawie których przeprowadzono teoretyczne obliczenia zmiany liczby kilomoli dla różnych paliw w zależności o składu mieszanki palnej. Wyniki obliczeń zostały przedstawione w tabelach. Następnie przeanalizowano wpływ zjawiska kontrakcji na parametry procesu spalania. We wnioskach dokonano porównania wpływu opisanych wcześniej zjawisk na poszczególne paliwa w zależności od ich składu chemicznego oraz składu mieszanki palnej.
Źródło:
Combustion Engines; 2013, 52, 3; 72-78
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative research of organic components of emissions using compression ignition engine fuelled with diesel oil or rape seed methyl esters
Autorzy:
Rusin, M.
Powiązania:
https://bibliotekanauki.pl/articles/246049.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Cl internal combustion engines
motor fuels
toxic exhaust emissions
Opis:
The results of comparative research of the organie components in the exhaust emissions of the CI engine fuelled with Diesel oil or rape seed methyl esters (RSME) were presented in this paper. The experimental works reported here was carriedout on the turbocharged, four cylinder, water cooled, CI engine, T 370 type (80 kW rated power at 2400 rpm, 400 Nm maximum torque at 1440 rpm, bore/stroke - 110/120 mm, displacement volume - 4560 cm3, compression ratio 17:1). The Signal equipment and AVL eeuipment were used for regulated exhaust emissions measurements and Hewlett Packard chromatograph type HP 5890 H for measurements of organic species emissions. The research was carried out under engine full load at maximum torque speed and at rated power speed. Using special equipment and normalized procedures the chromatographic test samples were collected. The 83 species were identified in HC emissions at these experiments but only the benzene, toluene and acetaldehyde were the components which were detected in substantial guantity. The research results show that the percentage emissions of individual components in total emissions of HC were weakly dependent on the used fuel. However in the case of RSME engine feed the HC emissions were lower than hose of the engine fuelled with Diesel oil and total emissions of their components were lower. Concluding, emissions from RSME combustion are less harmful than emissions of the engine fuelled with Diesel oil.
Źródło:
Journal of KONES; 2010, 17, 1; 351-358
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposit forming tendency in sparkignition engines and evaluation of gasoline detergent additives effectiveness
Autorzy:
Stępień, Z.
Oleksiak, S.
Powiązania:
https://bibliotekanauki.pl/articles/242321.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
deposits
detergent additives
engine fuels
test methods
Opis:
The paper describes influence of legislation requirements on development of spark ignition engines construction and new expectations towards today's fuels and detergent-dispersant additives. Paper presents development history of fuel additives especially of detergent additives. It indicates most critical places of engine deposits formation and its impact on fuel consumption, emission and vehicle driveability. It describes also the most popular engine tests methods for evaluation of deposits forming tendency on intake valves and combustion chambers and detergent additives effectiveness, focusing on CEC (Coordinating European Council for the Development of Performance Tests for Transportation Fuels, Lubricants and Other Fluids) test methods by using of Mercedes Ml 02 (CEC F-05 - 93 - Inlet Valve Cleanliness in the MB Ml02E Engine) and Mili engines (CEC F-20 - Test Method For Inlet Valve Cleanliness). CEC test methods has been approved both by fuel producers and engine and vehicles manufacturer, what is noted e.g. in World Wide Fuel Charter. From many years in major of these Groups, representatives of Oil and gas Institute (earlier as Petroleum Processing Institute) had an active part. Deposits formed in the injectors, intake valves and combustion chambers of gas o line engines can cause various performance and emissions problems.
Źródło:
Journal of KONES; 2009, 16, 2; 421-431
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of injection and combustion processes in 4-stroke spark ignition engine with CNG direct injection
Autorzy:
Sendyka, B.
Mitianiec, W.
Noga, M.
Wachulec, W.
Powiązania:
https://bibliotekanauki.pl/articles/246095.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
injection process
combustion process
simulation
modelling
alternative fuels
CNG
Opis:
The paper presents results of simulation conducted as afirst step of 4-stroke spark ignition experimental engine testing. The simulations were performed in a KIVA-3Vsoftware, which is intended to carry out a 3-D simulations of engine's processes. The source code of the software has been modified in order to apply it for gas injection. Original version of the software has been designedto simulate liquid fuel injection only. The simulation of direct CNG injection and combustion has been done for stratified and homogenous modes in order to check the assumed injection, ignition and charging parameters. Important assumption is that the injector had only one nozzle with flow area equal to 2 mm2. Two different cases of fuel direct injection for stratified charge have been analysed. In the first case fuel jet was almost vertical. In the other one fuel jet was nearly horizontal. Further testing has been performed using one-cylinder motorcycle 4-stroke SUZUKI DR-Z400S engine adapted to CNG fuelling. Such an engine has a suitable high compression ratio for CNG fuelling. The simulation has confirmed assumed parameters and has shown that one nozzle injector doesn't provide required fuel stream dissipation and piston crown modification is needed to direct fuel stream in spark plug area. However doing simulation requires some effort this example has shown than this is very important step before conducting experimental tests which provides crucial information and helps to avoid expensive mistakes which can be made during experimental engine preparation.
Źródło:
Journal of KONES; 2010, 17, 1; 373-378
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of fuel properties on shape of injected fuel spray
Wpływ właściwości paliw na kształt wtryskiwanej strugi
Autorzy:
Reksa, M.
Sroka, Z. J.
Powiązania:
https://bibliotekanauki.pl/articles/133250.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engine
fuels
research
silnik spalinowy
paliwa
badania
Opis:
The debate on alternative fuels includes quality of combustion process depends on the properties of these fuels. The physicochemical parameters of fuel determine besides other the shape of the fuel jet, which effects on creation of mixture with air. The paper proposes a simplified method for assessing the shape of injected fuel spray based on the analysis of digital photos taken with the ordinary camera. Differences in the core of spray, jet angle and the presence of fuel droplets were presented for three different fuels. The results, described only briefly in this paper, can be helpful during the fuel injector designing or to test the engines.
W dyskusji nad paliwami alternatywnymi przewija się zagadnienie jakości procesu spalania uzależnione od właściwości tych paliw. Parametry fizykochemiczne paliw decydują między innymi o kształcie strugi wtryskiwanego paliwa, co przenosi się na sposób tworzenia mieszaniny z powietrzem. W pracy zaproponowano uproszczoną metodę oceny kształtu strugi wtryskiwanego paliwa na podstawie analizy zdjęć wykonanych kamerą cyfrowego. Wykazano zróżnicowanie w rdzeniu strugi, kącie rozpylenia oraz obecności kropel paliwa dla trzech różnych paliw. Uzyskane wyniki, opisane tylko skrótowo w niniejszej pracy, mogą być pomocne na etapie konstruowania wtryskiwaczy lub podczas badań silnikowych.
Źródło:
Combustion Engines; 2013, 52, 3; 806-810
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative Fuel Production Based on Sewage Sludge Generated in the Municipal Wastewater Treatment
Wytwarzanie alternatywnego paliwa z wykorzystaniem osadów ściekowych z miejskiej oczyszczalni ścieków
Autorzy:
Czechowska-Kosacka, A.
Cel, W.
Kujawska, J.
Wróbel, K.
Powiązania:
https://bibliotekanauki.pl/articles/1818132.pdf
Data publikacji:
2015
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
osady ściekowe
spalanie
paliwa alternatywne
sewage sludge
combustion
alternative fuels
Opis:
Problem osadów ściekowych, towarzyszy nierozłącznie procesom oczyszczania ścieków i nigdy nie był traktowany równorzędnie z ich oczyszczaniem. Jeszcze do niedawna przyjmowane były proste rozwiązania przeróbki osadów polegające na odsączaniu i suszeniu, które miały wpływ na późniejsze ich wykorzystanie. Każda z metod zagospodarowania osadów ściekowych ma swoje zalety i wady. Najbardziej radykalną metodą utylizacji osadów ściekowych jest ich spalanie. Podstawą tego procesu jest maksymalne wykorzystanie ciepła spalania i zmniejszenie objętości osadu. Przy prawidłowym doborze technologii osad może być spalony bez znacznego dodatku paliwa. W piecach cementowych przy wysokiej temperaturze i dużej stabilności gwarantowany jest całkowity rozkład substancji organicznej i uniemożliwia powstawanie wtórnych zanieczyszczeń charakteryzujących procesy spalania. W takich warunkach substancje organiczne przechodzące przez strefę wysokich temperatur w piecu do wypalania klinkieru, ulegają pirolizie i spaleniu do prostych związków nieorganicznych. Powstające popioły nie stanowią większego problemu, gdyż ulegają wbudowaniu w klinkier. Spalanie osadów ściekowych w chwili obecnej ma największą szansę rozwoju, tym bardziej, że wraz ze wzrostem zużycia energii przez przemysł, rolnictwo i indywidualną konsumpcję ludności rośnie proporcjonalnie emisja gazów spalinowych, ścieków i odpadów stałych. Wymienione powyżej czynniki, jak i szereg innych powodują, że poszukuje się alternatywnych źródeł energii,ale również dąży się do wykorzystania materiałów odpadowych jako źródło dodatkowej energii. Powszechnie obowiązująca praktyka składowania odpadów w litosferze, nie tylko wiąże się z bezpowrotną utratą cennych terenów i energii zawartej w osadach ściekowych, lecz dodatkowo powstające w wyniku tych procesów gazy i ścieki mogą zanieczyszczać środowisko. Przeprowadzone badania miały na celu rozeznanie możliwości wykorzystania osadów z mechaniczno-biologicznej oczyszczalni ścieków jako paliwa do wypału klinkieru. W wyniku przeprowadzonych badań stwierdzono, że ciepło spalania wysuszonego osadu ściekowego zmienia się w wąskim zakresie 14,4– 14,5 MJ/kg, a wiec jest paliwem porównywalnym energetycznie z drewnem,. Co związane jest ze stałym poziomem zawartości substancji organicznych. Wartość opałowa mokrego osadu zmienia się w zakresie 895–1607 kJ/kg, zatem trudno uznać mechanicznie odwodnione osady ściekowe za atrakcyjne paliwo. Jednak połączenie utylizacji z ewentualnym wykorzystaniem osadu do opalania pieca cementowego zyskuje ekonomiczne uzasadnienie. Przeprowadzone badania w skali technicznej wykazały, że dodanie osadów ściekowych do szlamu klinkierowego w ilości 2% powoduje niewielkie zmiany ich składu chemicznego, w szczególności zwiększa nieznacznie ilość substancji lotnych. Zaobserwowane wahania składu chemicznego i fazowego cementu portlandzkiego są niewielkie i należy stwierdzić, że utylizacja osadów ściekowych nie wpływa w żaden negatywny sposób na jakość otrzymanego produktu.
Źródło:
Rocznik Ochrona Środowiska; 2015, Tom 17, cz. 1; 246-255
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of water - fuel microemulsions as fuel for diesel engine
Autorzy:
Haller, P.
Jankowski, A.
Kolanek, Cz.
Walkowiak, W. W.
Powiązania:
https://bibliotekanauki.pl/articles/246514.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
emulsion's fuels
air pollution
environmental protection
Opis:
The combustion of fuels is and will be in the nearest future a basic way of acquiring the energy, among others, for transport purposes. Transport causes many threats for natural environment. It produces powders and particulates, together with many gaseous noxious substances and is also the source of noise and vibrations. Sources of propulsion, applied in transport, are almost exclusively piston-combustion engines, among which the dominant role play self-ignition engines. In the light of well-known advantages of these engines, they were accepted as most beneficial sources of car vehicles' propulsion in nearest decades, provided they meet the requirements of the future legal regulations regarding the environmental protection. The emission of nitrogen oxides (NOx) and particulate matters (PM) is a problem to be solved in modern engines. This constitutes so called targets conflict, consisting in excluding the alternative of both coefficients’ decrease, in the way of regulation the set of an engine and the limiting emissions, permitted by the EURO regulations. From among many different methods of limiting both the formation and emission of NOx, the method of the selective catalytic reduction (SCR) is universally applied. This method requires special installation with the catalyst and the reservoir intended for the "clinically" clean reductive measure. In the aspect of constituting opinions regarding the need of reducing additional installations and media on board the vehicle, it seems that to supply the engine with fuel-water emulsion and especially fuel-water microemulsion becomes an interesting solution.
Źródło:
Journal of KONES; 2012, 19, 3; 165-170
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Knock combustion in dual fuel diesel engine
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/242833.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
IC engines
alternative fuels
combustion process in engine
Opis:
This article presents the problem of the knock combustion in a dual fuel compression engine, in which additional fuel besides diesel oil was compressed natural gas (CNG). CNG was injected into the engine intake system and mixed with air supplying the engine. In this paper described the reasons of knock combustion, which occur with more intensity with the increase of methane content in engine fuel. The phenomenon of knock combustion in the dual fuel engine is difficult to eliminate, often impossible to avoid, and it forms a barrier limiting increase of methane share in the fuel. Also, this article contains the results of engine indicating and discussion on changes in the indicating diagrams caused by knock combustion. Carried out tests included engine indicating and numerical calculation of indicator diagrams with using spectral analysis and filtering cylinder pressure signals with high-pass filters. As a result of this calculation, several parameters describing intensity of knock combustion were determined. They allow to tell taking into account only cylinder pressure analysis if there is knock combustion inside engine combustion chamber or not. Knocking is an undesirable type of combustion in the engine, leading to excessive thermal and mechanical loading of the engine parts, causing premature wear of them. For this reason, this type of combustion should be eliminated from the engine operation and researchers of combustion processes must be provided with tools to detect and determine this kind of combustion.
Źródło:
Journal of KONES; 2014, 21, 4; 547-553
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison the piston air engine performance with aviation gasoline (Avgas) or the E-85 ecological fuel supply
Autorzy:
Balicki, W.
Irzycki, A.
Snopkiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/243897.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
nternal combustion engine
piston air engines
ecological fuels
exhaust pollutant
Opis:
The fuel presently used for feeding of aircraft piston engines (petrol including TEL) is characterized by "strong unfriendliness" for environment. Many research centres have been going on fuels investigation, which could substitute Avgas utilized in aviation. This is why are there no being in force for Europe standards defining the allowable emission of pollutions in exhaust gases of aircraft piston engines (equivalent to EURO - standards introduced for traction engines). The mixtures of gas o line and alcohols are tested as "alternative" aircraft fuels for spark ignition engines, and in case of Diesel engines - evenjet kerosene. During the research works on test bed carried out at Institute of Aviation the performance offour-stroke aircraft carburettor piston engine supplied by "classical" aircraft petrol and the E - 85 fuel (mixture of petrol and ethanol) were compared. Except for measuring the functional parameters of engine (rotational speed, torque, specific fuel consumption, pressures and temperatures) the emissions of gaseous pollutants incorporated in exhaust gas were measured and analyzed. The range of modifications of engine supply system - necessary to introduce in case of changing of fuel type within the tested engine -was worked up. There are foreseen comparative test of fuelling the engine with mixtures of petrol and alcohols in different proportions in the next phase of research works.
Źródło:
Journal of KONES; 2010, 17, 3; 25-32
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of fuel type on working parameters of testing combustion micro-engine
Autorzy:
Jankowski, A.
Rusin, M.
Powiązania:
https://bibliotekanauki.pl/articles/244792.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
reciprocating engines
micro power generator
microengine
alternative fuels
Opis:
The choice of appropriate additives to alternative type of fuels determines the basic problem related with diversification of fuels used to the internal-combustion engines. The research micro engine with swept volume of 165 mm3 and the rotational speed reaching 25000 rpm was fuelled with various liquid fuels of the methyl and ethyl alcohol base. To the alcohol, additives were added with various percentage compositions, such like castor oil and nitro methane. In the fuel system the mixer of fuel with air was applied, that permitted on supply with the liquid fuel, but the composition of the fuel-air mixture was controlled with the quantity of supplied air. Registered was the graph of compression pressure in mini combustion chamber, the maximum power and shaft output torque was measured with the different composition fuels supplied to engine. Research proved that not only alcohol type applied as fuel, but also above all percentage participation of additives to the fuels influenced most on the micro engine work parameters. For the same type of alcohol, but with the different additives, the maximum power and the maximum torque differed significantly. For the micro engine of this type, the best fuel was based on the methyl alcohol and has composition of 60% methanol as fuel, 15% nitro methane (CH3NO2) as fuel additive and 25% of lubricant - castor oil. Article presents the design of the power shaft output micro engine, tested fuels, exemplary graphs of compression pressures in mini chamber on the prototype of a miniature power shaft engine, graphs of the rotary torque and of the engine power of supplied with various fuels.
Źródło:
Journal of KONES; 2008, 15, 4; 187-195
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prognoza rozwoju paliw płynnych
The forecast of development of the liquid fuels
Autorzy:
Biernat, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1817705.pdf
Data publikacji:
2005-12-31
Wydawca:
Uniwersytet Kardynała Stefana Wyszyńskiego w Warszawie
Tematy:
silniki spalinowe
paliwa płynne
oleje
combustion engines
liquid fuels
oils
Opis:
The article includes analysis o f basic terms an d definitions an d following issues: the directions of modification and development of the drive in the wheel vehicles, the forecast of development of standard fuels for internal combustion engines, the improvement of demands towards oils and fuel liquids, prospective fuel substances and  non-standard fuels.
Źródło:
Studia Ecologiae et Bioethicae; 2005, 3, 1; 307-328
1733-1218
Pojawia się w:
Studia Ecologiae et Bioethicae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatyzacja procesów produkcyjnych w zakresie wytwarzania paliw alternatywnych
Automation of processes of alternative fuels production
Autorzy:
Osiński, J.
Rumianek, P.
Żach, P.
Powiązania:
https://bibliotekanauki.pl/articles/276548.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
odpady
recykling
paliwa alternatywne
spalanie
waste
recycling
alternative fuels
combustion
Opis:
W pracy oceniono możliwości wykorzystania energetycznego odpadów - stwierdzono, że w skali naszego kraju są one ogromnym źródłem energii, podano występujące ilości oraz skład w różnych regionach Polski. Omówiono problemy wynikające ze spalania paliw alternatywnych: konieczność stosowania wysokosprawnych urządzeń do oczyszczania spalin oraz najczęściej występujące toksyczne składniki spalin.
This study considers the possibility of using waste energy; authors state that in our country wastes are the great source of energy. In the article the quantities involved and the composition of the various Polish regions were given. The problems resulting from the combustion of alternative fuels - the need for high-performance exhaust gas cleaning equipment and the most common toxic components of exhaust - also were discussed.
Źródło:
Pomiary Automatyka Robotyka; 2013, 17, 2; 195-199
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inflammability evaluation of hydrocarbon fuels mixtures formed directly in the combustion chamber
Autorzy:
Sidorowicz, M.
Pielecha, I.
Powiązania:
https://bibliotekanauki.pl/articles/132966.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
fuel injection
mixing fuels
hydrocarbon fuels
combustion chamber
wtrysk paliwa
paliwa mieszane
paliwo węglowodorowe
komora spalania
Opis:
The proposed article involves an investigation of the processes taking place during the preparation of mixed fuels that are combined directly before combustion. The fuel dose formed in this way must take into account the qualitative and quantitative composition of the fuels and the amount of air in the process. Given that liquid fuels similar to gasoline (e.g. methanol, ethanol, butanol) are characterized by different properties, their comparison would be useful in order to use their ratio to influence the combustion process. The process of fuel preparation plays a decisive role in this issue. The article describes abilities of modelling the injection of various fuels simultaneously to the combustion chamber for creating fuel mixture directly before ignition. First part of the article consists of analysis of light hydrocarbon fuels mixing abilities, supported with present research data. Next part describes the evaluation of execution of the assumed system – two fuel injectors with analysis of spray penetration. The modelling of the injection and spray was performed in the AVL FIRE 2014.2 environment and the results were presented. The injection possibility was proven by injecting the fuel to the combustion chamber model. Local values of air-fuel ratio, density and ambient pressure were presented to better understand the potential in mixing fuels directly before ignition. The conclusion includes description of fuel mixing abilities, influence of various fuels on creation of a stratified mixture and definition of controllability of charge ignition.
Źródło:
Combustion Engines; 2017, 56, 3; 57-65
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania rozwoju i przebiegu procesu spalania alternatywnych paliw gazowych i ich mieszanek z wodorem w silniku ZI
An investigation on initiation and course of combustion process in SI engine fueled with alternative gas fuels and its hydrogen blends
Autorzy:
Kubica, G.
Powiązania:
https://bibliotekanauki.pl/articles/197253.pdf
Data publikacji:
2008
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
silnik ZI
paliwa gazowe
paliwa alternatywne
proces spalania
SI engine
gaseous fuels
alternative fuels
combustion process
Opis:
W opracowaniu przedstawiono wyniki badania wpływu rodzaju paliwa na przebieg spalania w silniku ZI. Wyselekcjonowana grupa paliw obejmowała alternatywne paliwa gazowe: LPG, CNG oraz mieszanki metanu z wodorem i benzynę bezołowiową 95 jako paliwo bazowe. Obiektem badań był silnik ZI, oznaczony kodem X16SZR w samochodzie Opel Astra I. Przeprowadzone badania obejmują pomiary ciśnienia indykowanego na stanowisku hamownianym oraz szczegółową analizę przemian termodynamicznych, zachodzących w zamkniętej komorze spalania. Analizy składników bilansu energii dokonano wykorzystując program o nazwie "EnComTwo", który realizuje założenia matematycznego modelu dwustrefowego. Analizie poddano poszczególne fazy procesu spalania ze szczególnym zwróceniem uwagi na takie aspekty, jak: zmiany ciśnienia indykowanego, przebieg wydzielania energii w trakcie spalania, długość procesu spalania i czas spalania ładunku.
The results of research an influence of fuel kind on combustion process in SI engine are presented in this paper. Selected fuels group include alternative gas fuels: LPG, CNG, hydrogen - CNG blends and unleaded gasoline 95 as a base fuel. SI engine X16SZR in Opel Astra I was investigated. The leaded tests include measurement results of dynamometer chassis test, as well as the detailed analysis of thermodynamic processes inside closed chamber. The aplication "EnComTwo", which resolves assumptions of mathematical model, was used in analysing of engine thermal balance. Combustion process was investigated in each of individual phases: initiation, dynamical combustion and flame extinguish. The most important parameters were: indicated pressure, heat released, combustion duration and time of combustion.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2008, 64; 159-166
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe rozwiązania proekologiczne w technologii spalania paliw
New pro-ecological solutions in fuel combustion technology
Autorzy:
Guziałowska-Tic, J.
Bok, A. W.
Tic, W. J.
Powiązania:
https://bibliotekanauki.pl/articles/1208127.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
spalanie
paliwa ciekłe
paliwa stałe
dodatki do paliw
katalizatory
combustion
liquid fuels
solid fuels
fuel additives
catalysts
Opis:
Przedstawiono osiągnięcia w dziedzinie rozwiązań proekologicznych w technologii spalania paliw konwencjonalnych. Zaprezentowane rozwiązania dotyczą paliw ciekłych: silnikowych i olejów opałowych, a także węgla jako paliwa stałego. Technologia spalania opiera się na dwóch fundamentach: istotna jest zarówno jakość zastosowanego paliwa, jak i warunki prowadzenia procesu. Efekty ekologiczne i energetyczne są wyznacznikami w doborze katalizatora dla spalanego paliwa w środowisku obwarowanym normami w zakresie zanieczyszczeń powietrza gazami odlotowymi.
This paper focuses on achievements in pro-ecological solutions sphere in conventional fuel combustion technology. Presented solutions holds for liquid fuels: engine fuels and fuel oils, also coal as a solid fuel. Combustion technology relies on two basis points: quality of applied fuel and conditions of running process are of considerable importance. Ecological and economic effects are the indicators in choosing a catalyst for fuel burned in surroundings restricted by standards within the scope of air polluted by exhaust gases.
Źródło:
Chemik; 2013, 67, 10; 881-888
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Paliwa alternatywne - cz. 1
Autorzy:
Biernat, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/985938.pdf
Data publikacji:
2018
Wydawca:
Nowa Energia
Tematy:
paliwa alternatywne
biopaliwa
silniki spalinowe
alternative fuels
biofuels
internal combustion engines
Opis:
Rozwój i modyfikacje napędów współczesnych silników wymagają odpowiednich paliw do tych napędów, tak aby spełnione zostały wymagania główne, określone odpowiednimi normami przedmiotowymi dla paliw konwencjonalnych oraz wymaganiami silników spalinowych wewnętrznego spalania określonymi zarówno dla paliw konwencjonalnych oraz innych nośników energii określanych jako paliwa alternatywne.
Źródło:
Nowa Energia; 2018, 4; 14-19
1899-0886
Pojawia się w:
Nowa Energia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conversion of Fiat 0.9 MultiAir engine to multi - fuelling
Autorzy:
Ambrozik, A.
Ambrozik, T.
Kurczyński, D.
Łagowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/247877.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
fuels
fuel supply system
liquefied petroleum gas
natural gas
Opis:
The development of human civilisation has always been related to an increase in energy demand. The growth of transportation and an increase in the number of automobile vehicles in service produce a rising demand for fuel. Before piston IC engine is replaced with a different effective power source, it is necessary to use gaseous fuels on a larger scale than ever before. The natural resources of gaseous fuels are estimated to be much higher than crude oil reserves. Additionally, engines can run on biogas, i.e. gaseous renewable fuel. The use of gaseous fuels means lowering the harmful effect engines produce on the natural environment. Multi-fuelling, i.e. switching from one fuel to another, could be an advantageous feature of automobile combustion engine, both from the user’s standpoint and with respect to environmental concerns. Gaseous fuels have desirable properties that are especially suitable for fuel of spark ignition engines. The paper presents the engine test bench constructed at the Laboratory of Heat Engines of the Kielce University of Technology. The test stand comprises modern spark ignition engine Fiat 0.9 MultiAir and the eddy-current brake. At the test stand, the engine was converted to fuelling with three fuels, namely petrol, LPG gas blends and compressed natural gas (CNG). The engine could run alternatively on the three fuels mentioned above. The stand is equipped with an external unit to control the engine work, which makes it possible to extend the range of the engine investigations.
Źródło:
Journal of KONES; 2013, 20, 4; 9-15
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Koncepcja zastosowania analizy cyklu życia w ocenie środowiskowej stałych heterogenicznych paliw rakietowych
The concept of the use of life cycle analysis in the environmental assessment of the heterogeneous solid rocket propellants based on the HTPB rubber and the PBAN
Autorzy:
Kukfisz, B.
Maranda, A.
Florczak, B.
Powiązania:
https://bibliotekanauki.pl/articles/136590.pdf
Data publikacji:
2018
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
paliwa rakietowe
produkty spalania
ekowskaźnik
rocket fuels
combustion products
eco-indicator
Opis:
W artykule przedstawiono wyniki analizy porównawczej sześciu składów stałych heterogenicznych paliw rakietowych, zawierających jako utleniacz tylko chloran(VII) amonu (AP), tylko azotan(V) amonu lub chloran(VII) amonu (AP) i azotan(V) amonu lub chloran(VII) amonu (AP) i azotan(V) sodu (NaNO3) i zawierających jako plastyfikator adypinian dioktylu (DOA) oraz jako lepiszcze syntetyczne kauczuki HTPB lub PBAN. Analizę porównawczą przeprowadzono w oparciu o metodę Ekowskaźnika dla jednej kategorii wpływu zmiany klimatu w ramach kategorii szkody zdrowie ludzkie. Analizowano wpływ gazowych produktów spalania poprzez potencjały globalnego ocieplenia dla warunków stałego ciśnienia w komorze wynoszącego 7 MPa i ciśnienia na wylocie komory równego 0,1 MPa. Wykorzystano wersje hierarchiczną w ramach oceny wielkości wpływu. Analiza wykazała, że dla każdego z analizowanych paliw rakietowych produkty gazowe na wylocie komory mają wyższą wartość, łączną liczbę Ekowskaźnika, czyli wyższy potencjalny wpływ na zmiany klimatu.
The paper presents results of a comparative analysis of six fixed compositions of heterogeneous rocket fuels containing only the ammonium perchlorate (AP), only the ammonium nitrate or the ammonium perchlorate (AP) and the ammonium trioxochlorate or the ammonium perchlorate (AP) and the sodium nitrate (NaN) as the oxidiser, and as plasticizer containing the di-octyl adipate (DOA) and the HTPB or the PBAN rubbers as the synthetic binders. A comparative analysis was carried out based on the Eco-indicator method for a single category of climate change impact under the category of the human life damage. The analysis was carried out of the impact of the gaseous burning products by the global warming potential for the constant pressure conditions in the chamber equalling to 7MPa and pressure on the chamber outlet equalling to 0.1 MPa. Use was made of the hierarchical version under appraisal of the magnitude of the exerted impact. The analysis has shown that for each of the analysed rocket fuels gaseous products on the outfall of the chamber have a higher total value of the number of points of the eco-indicator, i.e. a higher potential impact on the climate changes.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2018, 1, 66; 63-76
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Future mobility without internal combustion engines and fuels?
Czy w przyszłości transport będzie mógł funkcjonować bez silników spalinowych i paliw?
Autorzy:
Lenz, H. P.
Powiązania:
https://bibliotekanauki.pl/articles/133507.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
transport
combustion engines
engine fuels
alternative powertrain
alternative fuels
silnik spalinowy
paliwa silnikowe
napęd alternatywny
paliwa alternatywne
Opis:
For many decades to come, and in the foreseeable future, internal combustion engines – in many cases with electric motors – will be with us, just like the liquid fuels they require. The importance of crude oil will decline, as these fuels will be increasingly produced on a synthetic basis without CO2 emissions. The answers to the question "Future Mobility without internal Combustion Engines and Fuels?" are "no" in both cases. Purely battery-electric mobility will be applied in the future only in specific areas. fuel-cell vehicles will hardly be used because of the extreme infrastructure investment costs. In contrast, liquid fuels will ensure the future of mobility. in this scenario, energy such as solar or wind energy will be generated without CO2 emissions.
Silniki spalinowe funkcjonują jako źródła napędu pojazdów już ponad 100 lat i w dającej się przewidzieć przyszłości wciąż będą powszechnie stosowane, podobnie jak paliwa płynne potrzebne do ich zasilania. Znaczenie ropy naftowej będzie jednak powoli malało w miarę wzrostu skali produkcji paliw syntetycznych, w procesach zapewniających małą emisję CO2. Odpowiedź na pytanie: czy transport w przyszłości będzie odbywać się bez silników spalinowych i paliw brzmi: nie. Napęd elektryczny stosowany będzie tylko na wybranych obszarach. Pojazdy wykorzystujące ogniwa paliwowe nigdy nie osiągną większej popularności ze względu na wysokie koszty budowy niezbędnej infrastruktury. Tylko paliwa płynne będą w stanie zaspokoić przyszłościowe potrzeby transportu. Do ich wytworzenia wykorzystywana będzie jednak energia ze źródeł o zerowej emisji CO2, jak na przykład baterie słoneczne, czy farmy wiatrowe.
Źródło:
Combustion Engines; 2013, 52, 4; 3-15
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of energy and emission indicators of a piston engine supplied by a mixture of biogas
Autorzy:
Stępniak, D.
Surwiło, J.
Lampart, P.
Szymaniak, M.
Powiązania:
https://bibliotekanauki.pl/articles/175362.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
piston combustion engine
low caloric fuels
biogas
CO
CO₂
NOx emission
Opis:
The paper presents the methodology and results of research focused on experimental investigation of combustion of biogas fuels in a combustion piston engine. The study highlights the variability of exhaust gases parameters produced by the engine running in an idle mode and in a generation mode. The experimental analysis includes research about variability of temperature in the cylinders, depending on the composition of fuel used to supply the engine. The qualitative and quantitative analysis of exhaust gases extends on biogas substitutes with different proportions of CH₄ and CO₂. Characteristics of a piston combustion engine were created, including CO, CO₂, NOx emission indicators, for a range of engine load and fuel composition.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2016, 134; 109-120
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of LPG gas fuel injectors on the properties of low emission vehicles
Autorzy:
Majerczyk, A.
Radzimirski, S.
Powiązania:
https://bibliotekanauki.pl/articles/241843.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
liquid fuels
LPG
combustion engines
air pollution
environmental protection
Opis:
Modern spark-ignition engines used for the propulsion of low emission vehicles are fuelled by injection systems in which the fuel is individually metered to each cylinder by a single injector (multipoint injection). For the proper engine operation, it is necessary that the injectors are similar to each other and stable in respect of the fuel dosage during the whole engine operation. This requirement is satisfactorily met by petrol injectors used by OEM. In contrast to petrol injectors, gas injector used in LPG-fuelled vehicles, in particular for the retrofit, are still in the development phase and therefore their quality and production consistency are often regarded as unsatisfactory from the standpoint of view of the proper engine operation. The injector-to-injector variation in the fuel dosage results in air-fuel mixture maldistribution in the cylinders, which, in turn, affects vehicle emission characteristics. The paper presents results of an investigation of inconsistency of gas injectors used in LPG vehicles in respect of their dosage. The method of measurement of the dosage uniformity is described. On the basis of the measurement, three sets of injectors differing in respect of injector-to-injector variation were selected for further vehicle tests. Tests were conducted on a passenger Euro 4 car. The emissions of limited pollutants were measured over the NEDC type-approval cycle and cycle's representative for the real world driving under Polish driving conditions. The paper presents results of the conducted tests and discusses the effect of injector-to-injector variation on the pollutant emissions.
Źródło:
Journal of KONES; 2012, 19, 4; 401-410
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigation of the combustion of vegetable oils in diesel engine at low engine loads
Autorzy:
Błažek, J.
Vojtišek, M.
Powiązania:
https://bibliotekanauki.pl/articles/243132.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vegetable oils
diesel fuels
in-cylinderpressure measurement system
combustion engines
emissions
Opis:
Vegetable oils are being increasingly used as fuel in diesel engines in passenger vehicles, with various results. One of the associated problems is excessive emissions of organic compounds at very low engine loads. Aside from an undesirable increase in emissions, such compounds also contribute to the formation of deposits in the engine and in the catalytic reactor. In this study, a typical turbodiesel engine, adapted for operation on vegetable oils, was fitted with fast-response in-cylinder pressure measurement system. The engine was operated on an engine dynamometer at low loads typical for urban driving at several coolant and fuel temperatures. Results will be presented and discussed. Engine and rapeseed oil fuelling system setup, comparison of combustion timing of diesel fuel and rapeseed oil, indicated in-cylinder pressure for diesel fuel and rapeseed oil for different speeds and loads, indicated in-cylinder pressure at original and modified injection timing, comparison of nox and CO2 concentrations at original injection timing, emissions from rapeseed oil relative to diesel fuel at different speeds and loads, effect of injection timing optimization on peak indicated pressure, effect of injection timing optimization on nox and CO concentrations, Brake-specific fuel consumption, are presented in the paper.
Źródło:
Journal of KONES; 2007, 14, 3; 61-72
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odziaływanie rodzaju i udziału biomasy na maksymalne emisje NOx i SO2 podczas współspalania z węglem kamiennym i brunatnym
The influence of biomass type and mass fraction on NOx and SO2 maximum emission during the co-combustion process with hard coal and brown coal
Autorzy:
Górecka-Zbrońska, A.
Kijo-Kleczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/357343.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska
Tematy:
współspalanie paliw
węgiel kamienny
węgiel brunatny
biomasa
emisja NOx
emisja SO2
fuels co-combustion
hard coal
brown coal
biomass
NOx emission
SO2 emission
Opis:
W pracy zaprezentowano wyniki badań eksperymentalnych procesu spalania węgli: kamiennego oraz brunatnego z różnymi rodzajami biomasy, w postaci kulistych brykietów, stanowiących mieszankę paliwową. Celem badań było ustalenie oddziaływania udziału biomasy w paliwie i jego uwęglenia na maksymalną emisję spalin, powstałych podczas procesu współspalania paliw w strumieniu powietrza. Do przeprowadzenia badań wykorzystano rotalno–uniformalny plan badań PS/DS-P:λ (λ), który dzięki równoczesnej odpowiedniej zmianie przyjętych wejściowych parametrów procesu umożliwił uchwycenie interakcji między nimi. Na podstawie uzyskanych wyników badań stwierdzono, że istnieje możliwość wyznaczenia udziału danego rodzaju biomasy w mieszance paliwowej z: węglem kamiennym i węglem brunatnym wpływającego na optymalną wartość maksymalnych emisji NOx i SO2 w procesie współspalania.
In the paper the experimental results of hard coal and brown coal with biomass co-combustion are presented. The aim of research was to explain the influence of biomass and carbon participation in fuel-mixture (in briquette form) on NOx and SO2 maximum emission during fuels co-combustion in air. The “rotal” and “uniformall” schedule PS/DS-P:λ (λ) was used in the research. The analysis of results showed that it is the optimal participation of different types biomass in fuel-mixture (biomass and hard coal, biomass and brown coal) on the values of NOx and SO2 maximum emission during co-combustion of hard coal and brown coal with biomass.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2015, 17, 1; 17-31
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekonomiczne i ekologiczne przesłanki stosowania paliw alternatywnych
Economic and ecological rationale for use of alternative fuels
Autorzy:
Uzdowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/315391.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
paliwa alternatywne
zasilanie paliwem
silniki spalinowe
alternative fuels
fuel feed
combustion engines
Opis:
W artykule przedstawiono wybrane aspekty w zakresie perspektywy zastosowania paliw alternatywnych do zasilania tłokowych silników spalinowych.
The paper presents selected aspects of the prospects for alternative fuels to power internal combustion engines.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2012, 13, 4; 179-182
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary research of the diesel knock phenomenon with using of the crankshaft acceleration method
Autorzy:
Górski, K.
Lotko, W.
Powiązania:
https://bibliotekanauki.pl/articles/242350.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel knock
transient conditions
combustion process
acceleration method
wavelet transform
alternative fuels
Opis:
Paper presents an experimental study on the pressure variations inside of 3 - cylinder, a direct injection AD3.152 type diesel engine. The main aim of the preliminary engine test was to use of the crankshaft free acceleration method for detection of diesel knock phenomenon. For this research, each combustion chamber was equipped with AVL cooled pressure sensor mountedat the top of engine head. Using of such sensors and special prepared at Technical University of Radom data acquisition system allow to record time histories of in-cylinder pressure variations at conditions of free acceleration of the engine crankshaft. Results presented in this paper show, that such transient engine conditions can be successfully used for detection of diesel knock phenomenon. High frequency pressure oscillations, typical for knocking were observed in the first phase of the acceleration process for selected combustion chambers. Experimental tests have been done for engine fuelled with regular diesel oil (DF) and its blend with Ethyl Tert Butyl Ether (ETBE) used as an oxygenated additive. Engine test procedure, used methodology and data acquisition system and engine test results carried out in non-stationary conditions with using of crankshaft acceleration method are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 2; 141-148
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekologiczne aspekty stosowania biomasy roślinnej na przykładzie pelletu sosnowego i łuski słonecznika
Ecological aspects of the use of plant biomass on the example of pine pellets and sunflower husks
Autorzy:
Małek, W.
Powiązania:
https://bibliotekanauki.pl/articles/410327.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Tematy:
biomasa
ekologia
ciepło spalania
paliwa odnawialne
biomass
ecology
combustion heat
renewable fuels
Opis:
W artykule przedstawiono aspekty ekologiczne stosowania biomasy roślinnej na przykładzie pelletu sosnowego i łuski słonecznika. W pierwszej części opisano sposób jej przechowywania oraz zagrożenia jakie płyną z jej magazynowania. Następnie zbadano i porównano wartości opałowe, ciepło spalania, emisję gazów do atmosfery, wilgoć oraz popiół badanych rodzajów biomasy.
The article presents the ecological aspects of the use of plant biomass on the example of pine pellets and sunflower husks. The first part describes how to store it and how it is stored in warehouses. The calorific values, combustion heat, gaseous emissions, humidity, and ash of the biomass types examined were then examined and compared.
Źródło:
Chemistry, Environment, Biotechnology; 2017, 20; 63-66
2083-7097
Pojawia się w:
Chemistry, Environment, Biotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ethyl alcohol as a fuel for contemporary internal combustion engines
Alkohol etylowy jako paliwo do współczesnych silników spalinowych
Autorzy:
Kozak, Miłosław
Powiązania:
https://bibliotekanauki.pl/articles/329242.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
ethyl alcohol
combustion engines
motor fuels
alkohol etylowy
silnik spalinowy
paliwo silnikowe
Opis:
The article presents the conditions for the use of ethyl alcohol as a component and a sole fuel for internal combustion engines. Methods of ethanol production, its properties and the benefits and risks associated with using it as engine fuel have been described. The variants of commercial ethanol fuels allowed by law have also been presented. Ecological aspects of the use of ethanol fuels for modern internal combustion engines were presented. The opinion was expressed that although ethanol is used in bulk as a component of gasolines, its use as a self-contained fuel is and probably will continue to be small in the near future.
W artykule przedstawiono uwarunkowania stosowania alkoholu etylowego jako składnika oraz samodzielnego paliwa do silników spalinowych. Opisano metody produkcji etanolu, jego właściwości oraz korzyści i zagrożenia związane ze stosowaniem go jako paliwa silnikowego. Zaprezentowano dopuszczalne prawem warianty handlowych paliw etanolowych. Przedstawiono ekologiczne aspekty stosowania paliw etanolowych do współczesnych silników spalinowych. Wyrażono opinię, iż mimo, że etanol stosowany jest masowo jako komponent benzyn silnikowych, to jego zastosowanie jako samodzielnego paliwa jest i prawdopodobnie w najbliższej przyszłości będzie niewielkie.
Źródło:
Diagnostyka; 2019, 20, 2; 27-32
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies