Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ceramic membranes" wg kryterium: Temat


Wyświetlanie 1-15 z 15
Tytuł:
Methods for regeneration and storage of ceramic membranes
Autorzy:
Zielińska, A.
Powiązania:
https://bibliotekanauki.pl/articles/106051.pdf
Data publikacji:
2018
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
ceramic membranes
fouling
membranes regeneration
membrana ceramiczna
regeneracja membran
Opis:
Ceramic membranes are among one of the most promising candidates for membrane applications, owing to their excellent resistance to mechanical, chemical, and thermal stresses. These advantages make them an attractive filter material. An additional benefit which is extremely important for the industry, is their possibility of continuous operation at high efficiency while maintaining constant transmembrane pressure. Due to the inorganic material from which they are made, ceramic membranes have the possibility of being cleaned by steam sterilization and are resistant to micro-organisms. Although, due to low production costs, ceramic membranes are one of the most cost-effective membrane filtration technologies they are prone to substantial fouling. When used, a layer of contaminants is formed on the active surface, often reducing or completely filling the membrane pores resulting in fouling and concentration polarization. These phenomena cause a decreased efficiency of the process, which leads to the need for the membrane to be replaced with a new one. However, ceramic membranes have the possibility of being regenerated through a series of activities and the use of various chemical agents. The use of regenerated membranes would provide the opportunity to reduce exploitation costs. Although membrane regeneration does not guarantee a return to the initial parameters, it does allow for the recovery of high permeation flow. The aim of the research was to compare operating parameters of the ceramic membranes after multiple use and longtime storage with different condition of storage.
Źródło:
Acta Innovations; 2018, 28; 72-81
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania skuteczności usuwania mykoestrogenów z roztworów wodnych w zintegrowanym procesie sorpcja-rozkład fotokatalityczny-nanofiltracja
The Study on the Effectiveness of the Mycoestrogens Removal from Water via Integrated Sorption-Photocatalysis-Nanofiltration System
Autorzy:
Dudziak, M.
Powiązania:
https://bibliotekanauki.pl/articles/1819095.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
usuwanie mykoestrogenów
proces sorpcja-rozkład
ceramic membranes
separation
Opis:
The efficiency of mycoestrogens removal by means of integrated sorption-photocatalysis-nanofiltration system was evaluated. The hydraulic capacity of membranes was also investigated. The simulated solution based on tap water with the addition of humic acids as well as surface water were treated. Zearalenone and α-zearalenol were added to both treated waters in the amount of 500 µg/dm3. The sorption process with the use of powdered activated carbon was carried out simultaneously with photocatalysis in the medium-pressure reactor equipped with immersed lamp (the time of the treatment was established at 5 min). Next, after separation of carbon and photocatalyst particles the water was treated via nanofiltration. The obtained results were compared with ones derived for single stage treatments (i.e. photocatalysis, nanofiltration) and integrated systems of photocatalysis-nanofiltration and sorption-photocatalysis. The removal rate of mycoestrogens exceeded 82% (simulated water) for 3-stage integrated system and was much higher than for photocatalysis performed as a single stage and integrated with sorption. It was also found that the addition of activated carbon improved the hydraulic capacity of membranes. The relative permeability of nanofiltration membranes was higher for the system with photocatalysis enhanced with sorption. Additionally, the polishing of water via nanofiltration enabled the total removal of high-molecular weight organic compounds (UV absorbance values) as well as the decrease of inorganic compounds concentration (conductivity measurements).
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 2; 1929-1936
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrane fouling in the ultrafiltration of water–protein–sodium chloride model systems
Autorzy:
Ćwirko, K.
Tomczak, E.
Szaniawska, D.
Powiązania:
https://bibliotekanauki.pl/articles/185550.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrafiltration
ceramic membranes
fouling models
BSA
myoglobin
ultrafiltracja
mioglobina
Opis:
This paper presents ultrafiltration results of model BSA (bovine serum albumin) and MB (myoglobin) solutions prepared with or without NaCl addition. The protein concentrations in the solutions were equal to 0.05 g dm 3 for MB and 0.5 g dm 3 for BSA. The ultrafiltration tests were performed using a laboratory scale unit equipped with 90 mm ceramic disc membranes with a filtration area of 5:6-10-3 m2 and cut-off of 50 or 150 kDa. The tests were run under constant process conditions, i.e. a cross flow volume (CFV) of 5 ms-1, transmembrane pressure (TMP) of 0.2 MPa, temperature of 20 ◦C and NaCl concentration of 0 or 10 wt%. The installation worked in a semi-open mode with a continuous permeate discharge and retentate recycle. The performance of the membranes was measured with the permeate volumetric flow rate, JV (m3m 2s 1) while their selectivity was determined by the protein rejection, R. The paper evaluates and discusses the protein rejection mechanisms as well as the influence of the membrane cut-off and sodium chloride concentration in the feed on the flux decline during the ultrafiltration of BSA and MB. Moreover, it provides an analysis of the first fouling phase by applying usual filtration laws.
Źródło:
Chemical and Process Engineering; 2018, 39, 2; 185--196
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of fouling in ultrafiltration ceramic membrane systems for surface water treatment
Autorzy:
Szaniawska, D.
Szmukala, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071878.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
woda powierzchniowa
ultrafiltracja
membrany ceramiczne
fouling
surface water
ultrafitration
ceramic membranes
Opis:
Research results dealing with ultrafiltration process using surface water supplying and being discharged from the fish hatchery on ceramic membranes with cut-off of 1.0 and 3.0 kDa are presented in the paper. The resistance-in- series model and modified fouling index was employed in the elaboration of results. Estimated values of fouling resistance and indexes characterize the yield of surface water ultrafiltration process. These values are essential for proper design of a larger scale membrane system.
W pracy przestawiono wyniki badań ultrafiltracji wody powierzchniowej zasilającej i opuszczającej wylęgarnię ryb z zastosowaniem membran ceramicznych o cnt-ofj 1,0 i 3,0 kDa. Do opracowania wyników zastosowano model oporów szeregowych oraz zmodyfikowany indeks foulingu. Oszacowane wartości oporów hydraulicznych i indeksów foulingu charakteryzują wydajność ultrafiltracji wody i są podstawą do prawidłowego zaprojektowania instalacji membranowej w większej skali.
Źródło:
Inżynieria i Aparatura Chemiczna; 2012, 6; 387-388
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations on separation properties of ceramic membranes in ultrafiltration process of model myoglobin solutions
Badanie właściwości separacyjnych membran ceramicznych w procesie ultrafiltracji modelowych roztworów mioglobiny
Autorzy:
Gabriel-Półrolniczak, U.
Szaniawska, D.
Ćwirko, K.
Powiązania:
https://bibliotekanauki.pl/articles/2072093.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltracja
membrany ceramiczne
białka
modelowanie molekularne
ultrafiltration
ceramic membranes
proteins
molecular modeling
Opis:
Results of ultrafiltration process of myoglobin model solutions are presented in the paper. The effect of TMP and pH on the efficiency and selectivity of the membrane was tested. Ultrafiltration tests were conducted using the flat ceramic Ti02/Zr02 membranes of 50 kDa cut-off under the following conditions: temperature 20°C, CFV 60 dm3/h, TMP 0.05-0.2 MPa,pH3,3-8.9, protein concentration 0,005%. Experiments were conducted in the field of polar molecular modeling in order to determine the size, shape and electrostatic properties of the analyzed protein.
W pracy zaprezentowano wyniki badań procesu ultrafiltracji modelowych roztworów mioglobiny. Badano wpływ TMP i pH na wydajność i selektywność membrany Testy ultrafiltracyjne były prowadzone przy użyciu płaskich membran ceramicznych z Ti02/Zr02 o cut-off 50 kDa w następujących warunkach: temperatura 20°C, CFV 60 dm3/h, TMP 0,05-0,2 MPa,pH 3,3-8,9, stężenie białka 0,005%. Przeprowadzono eksperymenty z zakresu modelowania molekularnego w celu określenia rozmiaru, kształtu oraz właściwości elektrostatycznych analizowanego białka.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 419--420
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie stopnia odzysku permeatu w dwustopniowym procesie oczyszczania wody z wylęgarni ryb z zastosowaniem membran nieorganicznych
Investigation of permeate recovery ratio in two-stage water treatment process of fish hatchery effluent with the use of inorganic membranes
Autorzy:
Szaniawska, D.
Bonisławska, M.
Ćwirko, K.
Worobec, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071365.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltracja
woda z wylęgarni ryb
membrany ceramiczne
ultrafiltration
fish hatchery effluent
ceramic membranes
Opis:
W publikacji przestawiono wyniki badań jakości wody odprowadzanej z wylęgarni ryb oraz wyniki badań procesu ultrafiltracji w systemie dwustopniowym z zastosowaniem membran ceramicznych o cut-off \ kDa oraz modułów 3-rurowcgo (stopień 1) i 1-rurowego (stopień II). Wykazano, że w wodzie opuszczającej wylęgarnię ryb przekroczone są wskaźniki jakości wód, tj. zawiesina ogólna, biochemiczne i chemiczne zapotrzebowanie tlenu oraz fosfor ogólny. Zastosowany proces ultrafiltracji umożliwia zmniejszenie wartości przekroczonych wskaźników, w największym stopniu w przypadku zawiesiny (100%), a w mniejszym, ale zapewniającym spełnienie wymogów środowiskowych w przypadku ChZTCr (91%) i BZT5 (73%). Stopień odzysku permeatu uzyskany w procesie dwustopniowej ultrafiltracji w czasie ok. 5 h pracy membran wynosi 87,5%.
Research results dealing with quality of water discharged from a fish hatchery and investigation results of two-stage ultrafiltration process with the use of ceramic membranes of 1 kDa cut-off and 3-tubes module (stage 1) as well as 1-tube module (stage II) are presented in the paper. The obtained results showed that water quality indicators such as total suspended solids (TSS), biological oxygen demand (BOD), chemical oxygen demand (COD) and total phosphorus (TP) were cxceedcd in fish hatchery effluent. The proposed ultrafiltration enables one to decrease values of exceeded indicators to the highest degree in case of suspension (100%) and to the lesser degree (but still ensuring compliance with environmental requirements) in case of CODCr (91%) and BOD5 (73%). The permeate recovery ratio obtained in two-stage ultrafiltration during membrane operating time of about 5 hr was equal to 87.5%.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 5; 104-105
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cross-flow ultrafiltration of model bovine serum albumin solutions in a laboratory scale
Badania ultrafiltracji w układzie krzyżowym modelowych roztworów albuminy surowicy bydlęcej (BSA)
Autorzy:
Gabriel-Półrolniczak, U.
Szaniawska, D.
Ćwirko, K.
Powiązania:
https://bibliotekanauki.pl/articles/2072732.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltration
ceramic membranes
bovine serum albumin
membrane fouling
ultrafiltracja
membrany ceramiczne
surowicza albumina wołowa
fouling membrany
Opis:
The results of ultrafiltration tests carried out in a cross-flow mode with BSA model solutions using a laboratory scale setup equipped with fiat ceramic membranes are presented. The influence of operating parameters such as TMP, NaCl concentration and pH on membrane permeability was investigated. A decline in permeate flux with the increase of TMP and NaCl concentration and the decrease of pH was observed during tests. Membrane permeability for pure water was found in order to determine the membrane resistance RM for different TMP values. A short analysis of fouling phenomenon was performed based on the calculated flux decline and fouling resistance.
Przedstawiono wyniki badań ultrafiltracji w układzie krzyżowym (crossflow) modelowych roztworów BSA przy użyciu instalacji laboratoryjnej z płaskimi membranami ceramicznymi. Badano wpływ parametrów operacyjnych takich jak TMP, stężenie NaCl i pH na przepuszczalność membrany. Dla wyższych wartości TMP oraz stężenia NaCl oraz niższych wartości pH obserwowano spadek strumienia objętościowego permeatu. W celu ustalenia wielkości oporu membrany RM dla różnych wartości TMP wyznaczono przepuszczalność membrany dla wody. Przeprowadzano krótką analizę zjawiska foulingu na podstawie obliczonego spadku strumienia objętościowego permeatu oraz oporu foulingu.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 237--238
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrafiltration od waste brine generated by fish meal industry
Ultrafiltracja zużytych solanek powstających w zakładach przetwórstwa rybnego
Autorzy:
Szaniawska, D.
Ćwirko, K.
Gabriel-Półrolniczak, U.
Szmukała, M.
Powiązania:
https://bibliotekanauki.pl/articles/2073406.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltracja
membrany ceramiczne
solanka z przetwórstwa ryb
fouling membranowy
ultrafiltration
ceramic membranes
brine from fish processing
membrane fouling
Opis:
Przedstawiono wyniki badań doświadczalnych procesu ultrafiltracji odpadowej solanki z zakładów przetwórstwa rybnego z zastosowaniem membran ceramicznych o cut-off 300 i 150 kDa. Testy ultrafiltracyjne prowadzono w zakresieptf 5,0-6,7 dla TMP 0,1-0,2 MPa i CFV 60 dm3/h. Analizowano wpływ czasu filtracji, ciśnienia transmembranowego i cut-off membrany na wydajność procesu separacji i skuteczność zatrzymywania białka ogólnego i tłuszczu oraz identyfikowano główne opory transportu masy, opór warstwy aktywnej membrany, RM i opór spowodowany foulingiem, Rr.
Research results dealing with the ultrafiltration process of waste brine from fish processing plants with the use of 300 and 150 kDa ceramic membranes are presented. Ultrafiltration tests were carried out for pH in the range of 5.0-6.7, TMP of 0.1-0.2 MPa and CFV of 60 dm3/h. The influence of ultrafiltration time, transmembrane pressure and cut-off on the separation process performance and effectiveness of total protein and fat rejections was analyzed and the main mass-transport resistances, caused by membrane active layer, ÄAj and fouling, RF were identified.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 479--480
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pro-environmental treatment technology of industrial brines using ceramic membranes
Prośrodowiskowa technologia oczyszczania solanek przemysłowych z zastosowaniem membran ceramicznych
Autorzy:
Szaniawska, D.
Ćwirko, K.
Gabriel-Półrolniczak, U.
Mizielińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/127148.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
ultrafiltration
ceramic membranes
industrial brine
fish processing
microbiological analysis
technologie prośrodowiskowe
ultrafiltracja
membrany ceramiczne
solanki przemysłowe
przetwórstwo ryb
analiza mikrobiologiczna
Opis:
The paper presents the results of a multi-stage ultrafiltration process of industrial waste brines with the use of a pilot plant and commercial ceramic membranes. The purpose of the study was to analyse the applicability of ultrafiltration and membranes of various cut-off for the treatment of waste brines and fractionation of proteins contained therein. Research on the membrane process was performed under constant conditions: transmembrane pressure TMP = 0.2 MPa, velocity of a saline over the surface of the membrane CFV = 6 m/s, the temperature T = 25°C using ceramic membranes with a cut-off of 300, 150 and 50 kDa. In tests run in the semi-open ultrafiltration system (continuous discharge of a permeate and retentate recirculation) there were analysed the concentration of protein in permeate and retentate, as well as the recovery of the permeate QP. Results of microbiological tests on used brines and permeates after ultrafiltration process performed by an independent testing laboratory are also presented.
Przedstawiono wyniki badań wieloetapowego procesu ultrafiltracji zużytych solanek przemysłowych z zastosowaniem instalacji pilotowej oraz komercyjnych membran ceramicznych. Celem badań była analiza możliwości zastosowania ultrafiltracji i membran o różnym cut-off do oczyszczania zużytych solanek i frakcjonowania protein w nich zawartych. Badania procesu membranowego wykonano w stałych warunkach: ciśnienie transmembranowe TMP = 0,2 MPa, prędkość solanki nad powierzchnią membrany CFV = 6 m/s, temperatura T = 25ºC z zastosowaniem membran ceramicznych o cut-off 300, 150 i 50 kDa. W testach ultrafiltracyjnych realizowanych w systemie półotwartym (ciągłe odprowadzanie permeatu i zawracanie retentatu) analizowano zawartość protein w permeatach i retentatach oraz stopień odzysku permeatu Qp. Przedstawiono również wyniki badań mikrobiologicznych zużytych i oczyszczonych solanek wykonane przez dwa niezależne laboratoria.
Źródło:
Proceedings of ECOpole; 2015, 9, 1; 133-138
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testowanie możliwości zastosowania ultrafiltracji do recyklingu wody w wylęgarniach ryb
Application of ultrafiltration in culture water recycling in fish hatchery
Autorzy:
Szaniawska, D.
Bonisławska, W.
Kuca, M.
Powiązania:
https://bibliotekanauki.pl/articles/2070725.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
wylęgarnia ryb
ultrafiltracja
membrany ceramiczne
oczyszczanie wód
zamknięcie obiegu wody
fish hatchery
ultrafiltration
ceramic membranes
water treatment
closed loop of cyclic water
Opis:
Wody zasilające i opuszczające wylęgarnie ryb muszą być poddawane efektywnemu oczyszczaniu ze względu na konieczność optymalizacji procesu inkubacji ikry i ochrony środowiska wodnego. Celem badań jest przetestowanie procesu ultrafiltracji i membran ceramicznych l kDa, jako metody usuwania zawiesiny, fosforu i żelaza oraz redukcji poziomu BZT-, i ChZT z wód krążących w obiegu zamkniętym malej wylęgarni. Uzyskane wyniki wskazują, że badana technika membranowa może być wykorzystana w gospodarce wodno-ściekowej wylęgarni do recyklingu wody.
Feed and wastewator from aquaculture facilities must be effectively treated for environmental and embryological reasons. The objective of this study was to evaluate ultrafiltration process using a ceramic 1 kDa membrane asa treatment option for removal of total suspended solids, total phosphorous and iron, and reducing BOD and COD level in closed loop of cyclic water in fish hatchery. The obtained results indicate that the tested membrane and technique employed can be used in full-scale treatment technology for culture water recycling.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 5; 101-103
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fouling membran ceramicznych w procesie ultrafiltracji roztworów białka i chlorku sodu
Analysis of ceramic membrane fouling during ultrafiltration of protein and sodium chloride solutions
Autorzy:
Szaniawska, D.
Kuca, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071203.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany ceramiczne
ultrafiltracja
zużyte solanki
fouling membranowy
model oporów szeregowych
ceramic membranes
ultrafiltration
waste protein salted solutions
membrane fouling
resistance-in-series model
Opis:
W publikacji przedstawiono wyniki badań doświadczalnych procesu ultrafiltracji modelowych i przemysłowych solanek z zastosowaniem membran ceramicznych 150 kDa. Głównym celem badań była analiza wpływu dwóch podstawowych parametrów operacyjnych, stężenia chlorku sodu w nadawie i ciśnienia transmembranowego TMP m fouling badanej membrany ceramicznej Al2O3/TiO2/ZrO2.
Results of ultrafiltration studies using ceramic 150 kDa membrane and model solutions containing bovine serum albumin and sodium chloride as well as salted wastewater from fish industry are reported. A main objective of this work was to study the effect of two main operating parameters, i.e. sodium chloride concentration in feed solution and transmembrane pressure, TMP, on fouling behavior of ceramic Al2O3/TiO2/ZrO2. membrane during ultrafiltration tests.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 3; 109-110
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja białka i produktów hydrolizy białka z odpadowych solanek z zastosowaniem ultrafiltracyjnych membran ceramicznych i wielostopniowego systemu membranowego
Application of ultrafiltration ceramic membranes and multistage membrane system for separation of proteins and protein hydrolysis products
Autorzy:
Szaniawska, D.
Ćwirko, K.
Gabriel-Półrolniczak, U.
Soból, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072890.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltracja wielostopniowa
membrany ceramiczne
odpadowe solanki
białka ryb
produkty hydrolizy białka
multi-stage ultrafiltration
ceramic membranes
waste brines
fish proteins
protein hydrolysis products
Opis:
Przedstawiono wyniki badań wielostopniowej ultrafiltracji zużytych solanek z przetwórstwa ryb z zastosowaniem membran ceramicznych o cut-off 300, 150 i 50 kDa. Testy ultrafiltracyjne wykonano w zakresie naturalnego pH solanki 6,6÷7,1 dla TMP 0,15 MPA, CFV 6 m/s, w temperaturze 293 K. Wyznaczono objętościowy strumień permeatu i współczynnik retencji białka ogólnego oraz zakres mas molowych białka i produktów hydrolizy białka zatrzymywanych przez membrany ceramiczne. Wyniki badań doświadczalnych wskazują, że membrana ceramiczna o cut-off 150 kDa może być zastosowana w głównym etapie technologii membranowej do jednoczesnej regeneracji solanki i odzysku białka.
Research results concerning the multi-stage ultrafiltration of waste brines from fish industry with the use of 300, 150 and 50 kDa ceramic membranes are presented. Multi-stage ultrafiltration tests were carried out in the range of brine natural pH of 6.6 ÷7.1 for TMP of 0.15 MPa, CFV of 6 m/s and temperature of 293 K. The permeate flux and total protein rejection coefficients were determined. The range of molecular weights of proteins and protein hydrolysis products retained by ceramic membranes were also defined. The experimental results indicate that a membrane with cut-off of 150 kDa can be used as a primary step of membrane technology for simultaneous waste brine regeneration and fish protein recovery.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 296--297
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance and selectivity of ceramic membranes in the ultrafiltration of model emulsion in saline
Wydajność i selektywność membran ceramicznych w procesie ultrafiltracji emulsji zasolonych
Autorzy:
Ćwirko, K.
Kalbarczyk-Jedynak, A.
Powiązania:
https://bibliotekanauki.pl/articles/410010.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
membrany ceramiczne
ultrafiltracja
selektywność membran
emulsje olejowe
wody zaolejone
wody zasolone
wody zęzowe
wody balastowe
ceramic membranes
ultrafiltration
selectivity of membranes
oil emulsions
oily wastewater
saline emulsions
bilge water
ballast water
Opis:
Oily wastewaters from different onshore and offshore installations and from maritime transport pose a serious threat to the environment so they must be treated by multistage separation also including membrane processes. The main advantages of such membranes are high performance and selectivity, high resistance for temperature and pressure, resistance for acids, bases and solvents, long service life and for application – significant reduction of industries and transport environmental impact. This work presents the results of the process of separation of oil from the emulsion with NaCl addition. Research was performed with a use of laboratory installation with ceramic 300 kDa membrane. The analysis concerned performance and selectivity of a membrane in the function of time and test results have been subsequently compared with the requirements of the IMO.
Wody zaolejone pochodzące z morskich i lądowych instalacji oraz transportu morskiego stanowią poważne zagrożenie dla środowiska, co sprawia że muszą być oczyszczane wieloetapowo, także z wykorzystaniem procesów membranowych i membran nieorganicznych. Głównymi zaletami takich membran są wysoka wydajność i selektywność, duża odporność na temperaturę i ciśnienie, odporność na kwasy, zasady i rozpuszczalniki, długa żywotność – a przy ich stosowaniu znaczące zmniejszenie oddziaływania przemysłu i transportu na środowisko. Praca przedstawia wyniki procesu separacji oleju z emulsji z dodatkiem NaCl. Badania doświadczalne zostały przeprowadzone z wykorzystaniem instalacji laboratoryjnej oraz membrany ceramicznej o średnicy 300 kDa. Wykonane analizy dotyczyły wydajności i selektywności badanej membrany w zależności od czasu, a wyniki analiz zostały następnie porównane z wymaganiami IMO.
Źródło:
Management Systems in Production Engineering; 2017, 2 (25); 88-92
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of pH on permeability of ceramic membranes and selectivity in ultrafiltration of model BSA and myoglobin solutions
Autorzy:
Gabriel-Półrolniczak, U.
Szaniawska, D.
Ćwirko, K.
Powiązania:
https://bibliotekanauki.pl/articles/207905.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ultrafiltration
ceramic membranes
membrane permeability
bovine serum albumin
BSA
myoglobin
microfiltration
ultrafiltracja
membrany ceramiczne
przepuszczalność błony
albumina surowicy bydlęcej
albumina (BSA)
albuminy surowicy
mioglobina
mikrofiltracja
Opis:
The results of ultrafiltration tests carried out with model BSA and myoglobin solutions using ceramic 50 and 150 kDa membranes have been presented. Membrane permeability and selectivity were investigated in function of pH, transmembrane pressure (TMP) as well as molecular modelling data for proteins such as size, geometrical parameters and pH of minimal free energy of folding. The study has shown that the permeate flux J(v) depends on TMP, whereas the protein rejection is mainly influenced by pH. The results demonstrated that molecular modelling data are not sufficient to explain the membrane behaviour and the membrane–protein charge interactions and fouling effects must be also considered to explain the rejection mechanisms.
Źródło:
Environment Protection Engineering; 2014, 40, 4; 135-141
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości i perspektywy stosowania surowców ilastych z kopalń węgla brunatnego?
Possibilities and perspectives of use of clayey raw minerals from lignite mines
Autorzy:
Galos, K.
Kot-Niewiadomska, A.
Powiązania:
https://bibliotekanauki.pl/articles/949385.pdf
Data publikacji:
2012
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
kopalnie węgla brunatnego
surowce ilaste
przemysł ceramiczny
przesłony hydroizolacyjne
lignite mines
clayey raw materials
ceramic industry
hydro-insulation membranes
Opis:
W artykule przedstawiono i poddano charakterystyce główne odmiany kopalin ilastych będących kopalinami towarzyszącymi w eksploatowanych krajowych złożach węgla brunatnego. Krótko omówiono dotychczasowe próby ich dokumentowania, a także zakres i sposoby ich pozyskiwania i składowania. Szczególną uwagę poświęcono obecnym i potencjalnym kierunkom wykorzystania tych kopalin, które związane są przede wszystkim z kilkoma gałęziami przemysłu ceramicznego (ceramika budowpłytki ceramiczne, materiały ogniotrwałe) oraz budową przesłon hydroizołacyjnych na składowiskach odpadów. Przyszłe wykorzystanie tych kopalin ilastych będzie jednak ograniczone, a największe perspektywy szerszego wykorzystania będą wciąż miały pozyskiwane w ograniczonych ilościach czyste szare iły z kompleksu B w KWB Turów. Przedmiotem zainteresowania pozostaną także iły beidellitowe z KWB Bełchatów (do wyczerpania ich zapasów zgromadzonych na składowisku), a także zgromadzone na składowiskach konińskich kopalń węgla brunatnego iły poznańskie, wykorzystywane w ceramice budowlanej.
deposits. Trials of their geological documentation, as as and ways of their and storing, shortly The special attention is paid to and perspective of these use, especially in the (building ceramics, ceramic of waste utilization of the discussed clays will be limited. Pure clays from complex B in Turów deposit will have the widest possible use. However, but they will be obtained in limited amounts. Customers will be interested in beidellite clays from their stored in the stockpile will be exhausted), as well as Poznań clays collected in the dumps of lignite in Konin region, which will be for the production of building ceramics.
Źródło:
Górnictwo Odkrywkowe; 2012, 53, 1-2; 15-19
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-15 z 15

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies