Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "capillary" wg kryterium: Temat


Tytuł:
Control of capillary instability under hydrodynamic impact on the reservoir
Kontrola niestabilności kapilarnej w warunkach hydrodynamicznego oddziaływania na złoże
Autorzy:
Panahov, Geylani M.
Abbasov, Eldar M.
Sultanov, Babek N.
Powiązania:
https://bibliotekanauki.pl/articles/31343984.pdf
Data publikacji:
2023
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
capillary
hydrodynamics
carbon dioxide
surface tension
sweep efficiency
oil production
kapilara
hydrodynamika
dwutlenek węgla
napięcie powierzchniowe
efektywność wydobywania
produkcja ropy naftowej
Opis:
The paper presents the results of studies on optimisation of water impact on a reservoir by means of sequential periodic increase in hydrodynamic pressure in order to extract capillary trapped oil. The method provides a coordinated account of both displacement conditions and capacitive-filtration characteristics of fluid-saturated reservoirs. The results of experimental, theoretical and field studies of mass transfer processes in the presence of hydrodynamic nonequilibrium in heterogeneous porous media are presented. This paper considers a case where capillary forces are the determining factor for the displacement of immiscible liquids. Laboratory test results have shown that the formation of CO2 in the reaction of an alkaline solution with naphthenic components can make an additional contribution to the control of surface tension in porous media. A series of experimental studies were carried out on a core sample model to simulate the oil displacement by in-situ generated CO2 gas-liquid system. The article offers an analytical and technological solution to the problem of ensuring the value of “capillary number” and capillary penetration corresponding to the most complete extraction of trapped oil by regulating the “rate” of filtration (hydrodynamic injection pressure). The paper presents the field cases of implementing the new reservoir stimulation techniques to increase sweep efficiency. For effective residual oil recovery in fluid flow direction, conditions of stepwise (staged) maintenance of specified hydrodynamic water pressure at the boundary of injection contour are considered. Estimated calculations allow to determine time duration and stage-by-stage control of injection pressure as a requirement for reaching the expected increase in oil recovery.
W artykule przedstawiono wyniki badań nad optymalizacją oddziaływania wody na złoże poprzez sekwencyjne, okresowe zwiększanie ciśnienia hydrodynamicznego w celu wydobycia kapilarnie zatrzymanej ropy. Metoda ta pozwala w sposób skoordynowany uwzględnić zarówno warunki wyporu, jak i charakterystykę kapilarno-filtracyjną złóż nasyconych cieczą. Przedstawiono wyniki badań doświadczalnych, teoretycznych i praktycznych procesów przenoszenia masy w obecności braku równowagi hydrodynamicznej w heterogenicznych ośrodkach porowatych. W artykule rozpatrywany jest przypadek, w którym siły kapilarne są czynnikiem decydującym o wypieraniu niemieszalnych cieczy. Wyniki badań laboratoryjnych wykazały, że powstawanie CO2 w reakcji roztworu zasadowego ze składnikami naftenowymi może mieć dodatkowy udział w kontroli napięcia powierzchniowego w ośrodkach porowatych. Przeprowadzono serię badań eksperymentalnych na modelu próbki rdzeniowej w celu symulacji wypierania ropy przez generowany in-situ układ gazowo-cieczowy CO2. W artykule zaproponowano analityczne i technologiczne rozwiązanie problemu zapewnienia wartości „liczby kapilarnej” i przenikania kapilarnego odpowiadających najbardziej pełnemu wydobyciu zatrzymanej ropy, poprzez regulację „szybkości” filtracji (ciśnienia zatłaczania hydrodynamicznego). W artykule przedstawiono przykłady praktycznego zastosowania nowych technik stymulacji złoża w celu zwiększenia efektywności wydobycia. W celu osiągnięcia efektywnego wydobycia ropy resztkowej w kierunku przepływu cieczy rozważono warunki stopniowego (podzielonego na etapy) utrzymywania określonego ciśnienia hydrodynamicznego wody na granicy konturu zatłaczania. Przeprowadzone obliczenia szacunkowe pozwalają na określenie czasu trwania i etapowego kontrolowania ciśnienia zatłaczania jako warunku osiągnięcia oczekiwanego wzrostu odzysku ropy.
Źródło:
Nafta-Gaz; 2023, 79, 2; 71-83
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Potential of Indirect Regenerative Evaporative Cooling System (M-Cycle) for Electronic Applications
Możliwości zastosowania systemu IREC (pracującego w cyklu M) do chłodzenia układów elektronicznych
Autorzy:
Olbrycht, Robert
Kałuża, Marcin
Felczak, Mariusz
Levchenko, Dmytro
Więcek, Bogusław
Powiązania:
https://bibliotekanauki.pl/articles/27312463.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
evaporative cooling
porous materials
capillary materials
heat and mass transfer
IR thermography
chłodzenie wyparne
materiały porowate
materiały kapilarne
wymiana ciepła i masy
termografia w podczerwieni
Opis:
The article presents a simple prototype system based on the concept of indirect regenerative evaporative cooling (IREC) thermodynamic cycle for electronics applications. The key problem of selecting porous capillary material is discussed and preliminary experimental results are presented using IR thermography. The presented research is an initial step towards the development of a laboratory-validated, fully operational IREC system for high-power electronics.
W artykule przedstawiono prototypowy układ chłodzenia oparty na koncepcji cyklu termodynamicznego pośredniego regeneracyjnego chłodzenia wyparnego (IREC) do zastosowań w elektronice. Omówiono kluczowy problem doboru porowatego materiału kapilarnego i przedstawiono wstępne wyniki eksperymentów z wykorzystaniem termografii w podczerwieni. Przedstawione badania stanowią wstępny krok w kierunku opracowania zweryfikowanego laboratoryjnie, w pełni funkcjonalnego systemu IREC do odprowadzania ciepła w systemach elektronicznych dużej mocy.
Źródło:
Pomiary Automatyka Robotyka; 2023, 27, 3; 19--25
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innovative Method for Water Deiron Ions Using Capillary Material
Autorzy:
Trus, Inna
Radovenchyk, Iaroslav
Halysh, Vita
Chuprinov, Evhen
Benatov, Daniel
Hlushko, Olena
Sirenko, Ludmila
Powiązania:
https://bibliotekanauki.pl/articles/2068480.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
iron ion
capillary material
purification
treatment
Opis:
Among all known inorganic pollutants of wastewater and natural water that adversely affect water bodies, different living organisms and human beings, iron compounds are the most common. Before discharging the wastewater into water bodies, it is important to remove iron ions from wastewater. The application of capillary materials in water and wastewater treatment is a promising direction of ecology and technology. The capillary properties of materials allow the development of quite simple, autonomous, highly efficient and energy-saving systems for water purification. The aim of the present paper was the investigation of the influence of the basic conditions of the filtration process with the application of capillary materia on the efficiency of iron ions removal. The initial concentration of the model solution, pH and temperature of the filtration process, as well as the contact area of the liquid phase with oxygen of the air were studied. The proposed method is appropriate for the treatment of water in the concentration range from 5 to 10 mg/dm3 with an optimum pH in the range of 4–7. The experimental data showed high efficiency of capillary materials application, providing sufficient removal of iron ions from low concentrated solutions, compared to the traditional method of precipitation. The main advantage of the capillary materials is the simplicity of their application, quite high degree of purification and there no need to consume electricity or additional reagents, which allows creating autonomous water treatment facilities and plants.
Źródło:
Journal of Ecological Engineering; 2022, 23, 3; 174--182
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reactive solute transport in blood flow through a permeable capillary
Autorzy:
Debnath, S.
Roy, A. K.
Bég, O. A.
Powiązania:
https://bibliotekanauki.pl/articles/38695392.pdf
Data publikacji:
2022
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
capillary
axial flow
radial flow
solute dispersion
Gill decomposition
filtration coefficient
exchange coefficient
advection coefficient
Opis:
The present analysis discusses the solute transport process in a steady 2D (axial and radial) laminar flow of blood through a permeable, finite length capillary. Blood is treated as a homogeneous Newtonian fluid and the solute is absorbed at the capillary wall with a linear irreversible reaction rate. The velocity profile is obtained by a regular perturbation technique, whereas the transport coefficients depicted by the Gill generalized dispersion model are solved numerically. A number of different scenarios are considered, namely transport with no-reaction, weak absorption, strong absorption, low filtration or high filtration, etc. In the initial stages, the temporal behaviour of the dispersion coefficient is identical to those cases when there is no radial velocity. For the combined effect of radial and axial velocities, however, the dispersion coefficient is lower for a high absorption rate than for a weak absorption rate. Diffusion is accelerated with higher values of filtration coefficient. Owing to the opposite effects of radial diffusion and radial velocity, the solute particles require more time to reach the steady state. The analysis finds applications in, for example, reactive nutrient and pharmacological transport in capillary hemodynamics.
Źródło:
Archives of Mechanics; 2022, 74, 2-3; 173-200
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Capillary water absorption in mixtures of cohesive soils stabilized with cement and hydrophobic agent
Kapilarna absorpcja wody w mieszankach gruntów spoistych stabilizowanych cementem i środkiem hydrofobizującym
Autorzy:
Węgliński, Szymon
Powiązania:
https://bibliotekanauki.pl/articles/1403613.pdf
Data publikacji:
2021
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
stabilization of cohesive soils
hydrophobizing agent
diamidoamine lactate
frost resistance
capillary absorption
stabilizacja gruntów spoistych
mleczan diamidoaminy
mrozoodporność
absorpcja kapilarna
Opis:
The paper presents the results of tests on capillary water absorption of mixtures from cohesive soils - clayey sand and sandy clay - stabilized with cement and the addition of a hydrophobic binder. Studies have shown that the appropriate addition of diamidoamine lactate allows to limit the penetration of water inside the stabilized samples, which increases their frost resistance. The mixtures with the additive showed lower capillary water absorption compared to the mixtures stabilized only with cement, especially in the first few hours after soaking with water.
W pracy przestawiono wyniki badań kapilarnej absorpcji wody mieszanek z gruntów spoistych – piasku gliniastego i gliny piaszczystej – stabilizowanych cementem i dodatkiem środka hydrofobizującego. Badania wykazały, że odpowiedni dodatek mleczanu diamidoaminy pozwala na ograniczenie wnikania wody wewnątrz stabilizowanych próbek, co wiąże się ze zwiększeniem ich mrozoodporności. Mieszanki z dodatkiem wykazały niższą kapilarną absorpcję wody w porównaniu do mieszanek stabilizowanych wyłącznie cementem, szczególnie w zakresie pierwszych kilku godzin po nasączeniu wodą.
Źródło:
Budownictwo i Architektura; 2021, 20, 2; 15-28
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kapilarne ogniskowanie izoelektryczne w analizie białek mleka
Capillary isoelectric focusing in the analysis of milk protein
Autorzy:
Janiszewska, Daria
Szultka-Młyńska, Małgorzata
Pomastowski, Paweł
Buszewski, Bogusław
Powiązania:
https://bibliotekanauki.pl/articles/1413252.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
biokoloidy
elektroforeza kapilarna
izoelektryczne ogniskowanie kapilarne
białka mleka
biocolloids
capillary electrophoresis
isoelectric capillary focusing
milk proteins
Opis:
The analysis of milk and dairy products is essential during production, quality control, and understanding the factors that cause food allergies. Milk is one of many examples of biocolloids. Numerous studies show that capillary electrophoresis and capillary isoelectric focusing is an excellent tool for this type of analysis. In addition, the coupling of these techniques with other analytical methods such as MALDI-TOF MS or ESI-MS enables the improvement of the quality of analyzes, allows the separation of proteins close to the isoelectric point values. This short overview summarizes the possibilities of using electromigration techniques in the proteomic and microbiological analysis of milk and milk products.
Źródło:
Wiadomości Chemiczne; 2021, 75, 7-8; 943-957
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modulational instability of obliquely interacting capillary-gravity waves over infinite depth
Autorzy:
Manna, S.
Dhar, A. K.
Powiązania:
https://bibliotekanauki.pl/articles/38629088.pdf
Data publikacji:
2021
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
nonlinear Schrödinger equation
crossing sea states
capillary-gravity waves
modulational instability
Opis:
Two coupled time-dependent two dimensional nonlinear Schrödinger equations have been derived using multiscale expansion for two nonlinearly interacting capillary-gravity waves over an infinite depth of water. These equations are then utilised to discuss the modulational (Benjamin-Feir) instability of two Stokes wavetrains due to unidirectional and bidirectional perturbations. It is found from the graphs and the three-dimensional contour plots that the rate of growth of instability for two wave packets interacting obliquely is higher than the instance of modulation of one wave packet. We have likewise examined the influence of capillarity on modulational instability.
Źródło:
Archives of Mechanics; 2021, 73, 5-6; 583-598
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena parametrów przestrzeni porowej łupków menilitowych z odsłonięcia w Birczy
The assessment of Menilite Shales pore space parameters from an outcrop in Bircza
Autorzy:
Dudek, Lidia
Ziemianin, Konrad
Powiązania:
https://bibliotekanauki.pl/articles/2143428.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
łupki menilitowe
adsorpcja
porozymetria rtęciowa
objętość porowa
menilite shales
adsorption
mercury injection capillary pressure
MICP
pore volume
Opis:
Celem pracy było scharakteryzowanie przestrzeni porowej łupków menilitowych występujących w odsłonięciach powierzchniowych z rejonu Birczy w jednostce skolskiej. Wszystkie próbki zostały pobrane z całego profilu stratygraficznego w jednym odsłonięciu w Birczy o długości 1 m. Struktura porowa próbek łupków wygrzanych w 105°C była mierzona metodą porozymetrii rtęciowej (ang. mercury injection capillary pressure, MICP) w temperaturze otoczenia oraz metodą adsorpcji azotu w temperaturze wrzenia ciekłego azotu. Ze względu na deformację przestrzeni porowej pod wpływem wysokich ciśnień roboczych rtęci, z krokami ciśnienia od 0 do 4136,84 bara, mikropory i mezopory można błędnie interpretować. Jako metodę uzupełniającą zastosowano więc pomiar adsorpcji azotu w celu prawidłowego obliczenia całkowitej połączonej objętości porowej. Na wykresach dV/dD (pochodnych objętości względem średnicy) połączono wyniki z obu technik pomiarowych, uzyskując pełniejszy obraz rozkładu objętości porów. W pracy przedstawiono możliwość dokładniejszego obliczenia objętości porów na podstawie nowego podejścia do analizy wykresów pochodnych. Obie metody zapewniają również kompleksową ocenę parametrów struktury porów, w tym powierzchni właściwej (ang. specific surface area, SSA), objętości mikroi mezoporów oraz rozszerzonego zakresu rozkładu wielkości porów (ang. pore size distribution, PSD). Porównując wyniki metody adsorpcyjnej z użyciem azotu z wynikami porozymetrii rtęciowej, należy pamiętać o różnicach w zakresach obu technik badawczych oraz o tym, że azot i rtęć rejestrują struktury porowe w znacząco odmienny sposób. Zatłaczanie rtęci do struktury porowej jest regulowane przez przewężenia porów, podczas gdy zjawisko adsorpcji jest kontrolowane przez powierzchnię porów. Zastosowanie porozymetrii rtęciowej i adsorpcji azotu do łupków menilitowych pokazuje, jak użycie tych dwóch metod może wpłynąć na uzyskanie wzajemnie uzupełniających się informacji, które weryfikują obliczenia objętości porowej głównej skały macierzystej dla karpackich rop naftowych.
The aim of this paper is to characterize pore space of superficial Menilite Shales from Bircza area within the Skole Unit. All specimens were sampled from single outcrop in Bircza at the distance of 1 m in the whole stratigraphic profile. Pore structure of shale samples preheated at temperature of 105°C was measured by both mercury injection capillary pressure (MICP) at ambient temperature and nitrogen adsorption at liquid nitrogen boiling point. Considering deformation of pore space under high mercury working pressures with pressure steps from 0 to 4136.84 bar, misinterpretation of micropores and mesopores is possible. Therefore, the nitrogen adsorption was used as a supplementary method in order to properly compute the total pore volume. In the dV/dD graphs (diameter derivative of a volume) the results from both measuring techniques were combined, thus obtaining more complete picture of pore volume distribution. The paper presents potential for more precise pore volume computation based on the analyses of their derivative graphs. Both methods provide also complex assessment of pore structure parameters, including specific surface area (SSA), volumes of micro- and mesopores and the extended range of pore size distribution (PSD). When comparing the results of the nitrogen adsorption method with those of the mercury injection method, it is necessary to keep in mind that there are different operating ranges of both methods as the nitrogen and mercury report the pore structures in a very different ways. Forced penetration of mercury into the pore structure is controlled by pore bottlenecks, while the process of adsorption is controlled by the pore surface area. The application of both mercury injection and nitrogen adsorption for Menilite Shales shows how the use of these two methods can provide complementary information that verifies pore volume calculations of the Carpathian petroleum main source rock.
Źródło:
Nafta-Gaz; 2021, 77, 10; 633-640
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric identification and modeling of rheological behavior of materials with fractal structure during heat treatment
Autorzy:
Sokolovskyy, Yaroslav
Shymanskyi, Volodymyr
Levkovych, Maryana
Kaspryshyn, Yaroslav
Powiązania:
https://bibliotekanauki.pl/chapters/32304248.pdf
Data publikacji:
2021
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
capillary-porous materials
deformation-relaxation processes
heat treatment
Opis:
The technological process of thermal treatment of capillary-porous materials, characterized by the influence of several factors on the material as load, humidity and temperature was considered. Mathematical models of non-isothermal moisture transfer and viscoelastic deformation, taking into account the fractal structure of the environment were constructed. One-dimensional mathematical models of deformation-relaxation processes in environments with fractal structure characterized by the effects of memory, spatial nonlocality and self-organization were considered. Taking into account that the fractional parameters of fractal models allow us to describe the deformation-relaxation processes in comparison with traditional methods more fully, the optimal approximation method, the Proni’s method was proposed. This method allows us to reduce the problem of identification of the fractional parameters which are part of the creep and relaxation kernels structure, to finding the solutions of systems of linear equations. Software to implement the obtained models was developed.
Źródło:
Methods and tools in CAD – selected issues; 107-117
9788366391871
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perturbations of the depth of liquid penetration into the capillary during bubble departures
Autorzy:
Dzienis, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2112920.pdf
Data publikacji:
2021
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
bubbles
bubble departure
liquid movement into the capillary
Opis:
In the present paper, the influence of bubble size on liquid penetration into the capillary was experimentally and numerically studied. In the experiment, bubbles were generated from a glass capillary (with an inner diameter equal to 1 mm) in a glass tank containing distilled water, tap water or an aqueous solution of calcium carbonate. These liquids differ in the value of their surface tension, which influences the bubble size. During experimental investigations, air pressure fluctuations in the gas supply system were measured. Simultaneously, the videos showing the liquids’ penetration into the capillary were recorded. Based on the videos, the time series of liquid movements inside the capillary were recovered. The numerical models were used to study the influence of bubble size on the velocity of liquid flow above the capillary and the depth of liquid penetration into the capillary. It was shown that the air volume flow rate and the surface tension have the greatest impact on the changes of pressure during a single cycle of bubble departure (Δp). The changes in pressure during a single cycle of bubble departure determine the depth of liquid penetration into the capillary. Moreover, the values of Δp and, consequently, the depth of liquid penetration can be modified by perturbations in the liquid velocity above the capillary outlet.
Źródło:
Acta Mechanica et Automatica; 2021, 15, 4; 254--259
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of capillary pumping on the course of cleaning porous materials containing liquid contaminants using supercritical fluids – A pore network study
Autorzy:
Krzysztoforski, Jan
Khayrat, Karim
Henczka, Marek
Jenny, Patrick
Powiązania:
https://bibliotekanauki.pl/articles/2086809.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
porous material
supercritical fluid
mathematical modelling
cleaning
capillary pumping
materiał porowaty
płyn nadkrytyczny
modelowanie matematyczne
czyszczenie
pompowanie kapilarne
Opis:
The role of capillary pumping on the course of cleaning porous materials containing liquid contaminants using supercritical fluids was investigated numerically. As a specific process to be modelled, cleaning of porous membranes, contaminated with soybean oil, using supercritical carbon dioxide as the cleaning fluid (solvent) was considered. A 3D pore-network model, developed as an extension of a 2D drying model, was used for performing pore scale simulations. The influence of various process parameters, including the coordination number of the pore network, the computational domain size, and the external flow mass transfer resistance, on the strength of the capillary pumping effect was investigated. The capillary pumping effect increases with increasing domain size and decreasing external flow mass transfer resistance. For low coordination numbers of the pore network, the capillary pumping effect is not noticeable at macro scale, while for high coordination numbers, the opposite trend is observed – capillary pumping may influence the process at macro scale. In the investigated system, the coordination number of the pore network seems to be low, as no capillary pumping effects were observed at macro scale during experimental investigation and macro-scale modelling of the membrane cleaning process.
Źródło:
Chemical and Process Engineering; 2021, 42, 4; 349--368
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concrete Capillarity under Different Curing Conditions Produced in Kurdistan-Iraq
Autorzy:
Herki, Bengin A.
Powiązania:
https://bibliotekanauki.pl/articles/102221.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
capillary water absorption
concrete
strength
UPV
absorpcja wody kapilarnej
beton
siła
Opis:
This study discussed the effect of the curing condition on the capillary water absorption of concrete incorporating the locally available materials. The compressive strength and ultrasonic pulse velocity (UPV) as part of mechanical and durability properties of concrete were also investigated. The engineering properties were conducted on concrete under three different curing conditions at different curing ages of 2 days, 7 days and 28 days. The three different curing conditions were water curing, dry curing and gunny-covered curing. According to the results obtained, the concrete under water curing condition demonstrated a lower capillary water absorption (CWA) at 2 and 7 days ages and the concrete under gunny-covered condition demonstrated lower CWA at 28 days of age, compared with the other curing conditions. It is interesting to see that the compressive strength (38 MPa) of concrete was almost the same at 28 days age under the gunny-covered and water curing conditions.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 131-139
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of wavy sea surface oil-derivative contamination with forward specular high-frequency scattering
Autorzy:
Pogorzelski, Stanisław
Rochowski, Paweł
Grzegorczyk, Maciej
Linde, Bogumił B. J.
Skrodzka, Ewa
Bielasiewicz, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/260616.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
crude oil contamination
capillary wave damping
acoustic surface scattering
statistical-frequency analyses
at-sea pollution detection
Opis:
A spectrum of low-frequency (20‒30 Hz) amplitude fluctuations of the ultrasonic (10 MHz) signal specularly scattered from water surfaces covered with monomolecular and thicker crude oil origin films of well-defined, oceanographically relevant viscoelastic properties was examined in laboratory and at-sea conditions. The relationship between the Surface water wave (30 Hz) damping coefficient and the oil layer thickness was established, and compared to the one predicted by the classical Stokes theory. The depression of the spectral energy density of wind-driven waves by surface films was inferred from the ratio of acoustic signal fluctuations spectra with/without films, and compared to that resulting from the Marangoni damping theory applicable to monolayers of particular surface viscoelasticity. The agreement between the theory and experimental data was satisfactory. As shown in at-sea experiments performed with a free-floating, buoy-like acoustic system, and an artificial oil slick spread over the Baltic Sea surface, the film’s rheological Surface properties can be recovered from acoustic surface probing, as well as oil spill edge detection. Simultaneous statistical analyses of the scattered signal amplitude distribution parameters turned out to be unequivocally related to the oil substance fraction weight, oil layer thickness, and the form of oil contamination.
Źródło:
Polish Maritime Research; 2020, 1; 173-179
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody wyznaczania krytycznego stężenia micelarnego związków powierzchniowo czynnych
Methods for determining critical micellar concentration of surfactants
Autorzy:
Grabowska, Ola
Dywicki, Paweł
Chmurzyński, Lech
Powiązania:
https://bibliotekanauki.pl/articles/171754.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
związki powierzchniowo czynne
krytyczne stężenie micelarne
konduktometria
elektroforeza kapilarna
izotermiczna kalorymetria miareczkowa
metoda luminescencyjna
surface active agents
critical micelle concentration
conductometry
capillary electrophoresis
isothermal titration calorimetry
luminescent method
Opis:
Surface active agents, also known as surfactants, are a group of chemical compounds that are used in various products of the chemical industry. These compounds are components of medicines, detergents, motor oils and many others. The multitude of uses of surfactants makes it important to know their aggregation behaviour in solution. There are many methods used to analyse surfactants behaviour in liquid phase. The choice of a particular technique usually depends on the chemical structure of the surfactant. An example of a method that is used in studies of ionic surfactants is conductometry. This technique allows to study the dependence of specific conductivity on surfactant concentration, enabling determination of critical micellar concentration (CMC). Capillary electrophoresis is another example of the method used to determine the critical micellar concentration. It allows to make measurements in conditions where other methods fail, including conductometric method. Surfactant solutions differ in viscosity, which changes with the appearance of micelles in solution. Measurement of marker compound migration time through surfactant solutions of various concentrations allow to determine critical micellar concentration. Isothermal titration calorimetry (ITC) allows to study the thermal effects associated with the aggregation of surfactants into micelles. Based on the energy changes that occur during titration, the critical micellar concentration of surfactant can be precisely determined. ITC is very sensitive method, so basically it can be used to examine all types of surfactants. In addition, the ITC method allows to determine the thermodynamic parameters of the undergoing micellization process. The use of several measuring methods gives a more complete picture of the phenomena occurring in solutions. It allows to understand aggregation process more accurately. Therefore, CMC measurement are often made with the use of several complementary methods.
Źródło:
Wiadomości Chemiczne; 2020, 74, 5-6; 371-390
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowa metoda interpretacji przestrzeni porowej na podstawie łączenia badań porozymetrii rtęciowej i adsorpcji azotu na przykładzie wybranych łupków menilitowych
Novel method of pore space interpretation based on joint Mercury Intrusion Porosimetry and Nitrogen Adsorption of the selected Menilite Shales
Autorzy:
Dudek, Lidia
Powiązania:
https://bibliotekanauki.pl/articles/1834256.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
łupki menilitowe
adsorpcja
desorpcja
porozymetria rtęciowa
powierzchnia właściwa
temperatura wygrzewania
Menilite Shale
adsorption
desorption
Mercury Injection Capillary Pressure
specific surface area
heating temperature
Opis:
In this paper, a new approach has been shown for the interpretation of the pore space characteristics, consisting in combining pore space volumetric fractional derivatives of mercury intrusion and nitrogen adsorption on the same scale without using any artificial data transformation. This new approach was shown using obtained results of measurements of surface Menilite Shales. It is based on the assumption that for any selected pore diameters, the existing pore space volume is independent of the applied non-wetting liquid agent (mercury, liquid nitrogen, liquid argon etc.). Any recorded differences of these two methods are due to cracking of pore walls under high mercury pressure or their elastic and/or plastic deformations and other interactions between pore building material and the non-wetting liquid used. Significant populations of pores in shales are too small to be measured using only MICP (Mercury Injection Capillary Pressure), which would explain the underestimation of the total porous space. Therefore, for its proper estimation, the complementary method of nitrogen adsorption has been used. The porous structure of Menilite Shale samples preheated at 105°C was measured using the mercury intrusion method MICP at ambient temperature and using nitrogen adsorption at its boiling point temperature of −195.8°C. Volumetric fractional derivatives of pore diameters obtained by these 2 different complementary methods were shown in the form of graphs dV/dD. Based on the porosimetric and helium pycnometric tests both bulk and open porosity was calculated, which allowed to characterise the filtration properties of rock samples. Based on the adsorption testing, the specific surface BET was calculated, as well as the pore size distribution and its total porous volume.
Źródło:
Nafta-Gaz; 2020, 76, 5; 291-298
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies