Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "bet" wg kryterium: Temat


Tytuł:
Dendrimeric peptide – montmorillonite intercalation compound
Montmorylonit interkalowany dendrymerami peptydowymi
Autorzy:
Kędzierski, M.
Janiszewska, J.
Moszumańska, I.
Powiązania:
https://bibliotekanauki.pl/articles/945857.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
dendrimeric peptides
montmorillonite
intercalation
X-ray diffraction
BET analysis
dendrymery peptydowe
montmorylonit
interkalacja
dyfrakcja rentgenowska
analiza BET
Opis:
The solution intercalation method was used for immobilization of low-molecular-mass lysine--based peptide dendrimers (Lys-D, hydrochloride form) on montmorillonite (MMT). The intercalation was confirmed by X-ray diffraction and elemental analysis of the products. Analysis of Brunauer-Emmett-Teller (BET) nitrogen adsorption–desorption isotherms indicates that both interlayer and external clay surfaces are involved in the binding of dendrimeric peptides. Depending on the structure of Lys-D, including the location of protonated amino groups in peptide branches, the intercalation involves ion exchange between sodium montmorillonite and peptide ionic groups or proceeds leaving the intact peptide counterions. Thermogravimetric analysis (TGA) studies of MMT-Lys-D compounds indicate that the major mass-loss associated with the decomposition of peptide component is shifted to higher temperatures compared to the peptide itself.
Metodą interkalacji z roztworu przeprowadzono immobilizację niskocząsteczkowych dendrymerów L-lizyny (Lys-D, w formie chlorowodorku) na montmorylonicie (MMT). Wyniki analizy metodą dyfrakcji rentgenowskiej (XRD) oraz analizy elementarnej (C, H, N, Cl) potwierdziły interkalację peptydu w MMT. Na podstawie analizy izoterm adsorpcji–desorpcji azotu Brunauera-Emmetta-Tellera (BET) stwierdzono, że związanie peptydu następuje zarówno w przestrzeni międzywarstwowej, jak i na zewnętrznej powierzchni MMT. W zależności od struktury peptydu Lys-D i położenia protonowanych grup aminowych interkalacja połączona jest z wymianą jonową pomiędzy montmorylonitem sodowym i peptydem lub przebiega z zachowaniem wyjściowych przeciwjonów chlorkowych Lys-D. Analiza TGA związków MMT-Lys-D wskazuje, że główny ubytek masy związany z rozkładem składnika peptydowego zachodzi w wyższym zakresie temperatury niż w przypadku peptydu niezwiązanego.
Źródło:
Polimery; 2016, 61, 10; 677-682
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sorptive properties of modified maize starch as indicators of their quality
Autorzy:
Ocieczek, Aneta
Skotnicka, Magdalena
Baranowska, Kinga
Powiązania:
https://bibliotekanauki.pl/articles/972337.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
modified maize starch
bet
gab
lewicki
equations (1998
2000)
peleg
Opis:
The physical and adsorptive properties of three products of modified maize starch in terms of the susceptibility of starch granules to surface processes as affected by their physicochemical diversity was compared in this study, using five mathematical models. It was assumed that modification of native starch is an important factor affecting its adsorptive properties. The products under study differed significantly in terms of the distribution of the size and shape parameters of their granules. The Guggenheim, Anderson and de Boer equation, characterised by relatively low sums of square deviations and low and similar errors of their different parameters, was the most useful in the description of empirically determined isotherms of adsorption. Parameters of the Guggenheim, Anderson and de Boer equation were used to estimate the parameters of the product surface microstructure. Modification of native maize starch differentiated the size of the monolayer, specific surface of sorption, and characteristics of capillaries.
Źródło:
International Agrophysics; 2017, 31, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowe porównanie właściwości sorpcyjnych kawy zbożowej i orkiszowej
Model comparison of sorption properties of coffees from roasted cereal grains and spelt
Autorzy:
Ruszkowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2071612.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
izoterma sorpcji
aktywność wody
BET
GAB
sorption isotherm
water activity
Opis:
Celem pracy było modelowe porównanie właściwości sorpcyjnych kawy zbożowej i orkiszowej. Przeprowadzone badania dowiodły, że różnice w właściwościach sorpcyjnych badanych kaw, określone na podstawie kształtu i położenia wyznaczonych izoterm oraz kinetyki i szybkości procesu sorpcji pary wodnej, determinowane były różnicą wilgotności między próbkami i ich otoczeniem oraz różnorodnym składem surowcowym i zastosowaną technologią produkcji.
The aim of this study was to compare the sorption properties of coffees from roasted cereal grains and spelt. The studies proved that differences in coffee sorption properties, evaluated on basis of shape and position of designated isotherms and kinetics and rate of water vapor sorption process were caused by humidity difference between samples and their surroundings and composition of raw material and production technology used.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 2; 32-33
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of surface properties of anthracite coals before and after high temperature heating process
Autorzy:
Xia, W.
Xie, G.
Powiązania:
https://bibliotekanauki.pl/articles/951846.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
heating
coal hydrophobicity
XPS
SEM
BET
contact angle
Opis:
Surface property plays a very important role on coal hydrophobicity which determines flotation behavior of fine coals. However, coal spontaneous combustion makes coal suffer both oxidation and high temperature heating processes. Coals from the outside of coal piles primarily suffer oxidation (or combustion process) while coals from the inside of coal piles primarily suffer high temperature heating process. It is necessary to investigate the changes in surface properties of coal before and after high temperature heating process. In this investigation, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), surface area (BET) and contact angle measurements were used to indicate the changes in surface properties of anthracite coal before and after high temperature heating process. Throughout this study, surface properties of coal changed significantly after high temperature heating process. Meanwhile, coal hydrophobicity can be also reduced after high temperature heating.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 205-212
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stopnia rozdrobnienia pieprzu czarnego na jego higroskopijność badaną z wykorzystaniem wybranych modeli sorpcji
The effect of black pepper degree fragmentation on its hygroscopic properties with using selected models of sorption
Autorzy:
Ocieczek, A.
Pukszta, T.
Nebel, J.
Powiązania:
https://bibliotekanauki.pl/articles/341803.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Morski w Gdyni. Wydawnictwo Uniwersytetu Morskiego w Gdyni
Tematy:
pieprz czarny
aktywność wody
izotermy sorpcji
model BET i GAB
black pepper
water activity
sorption isotherms
model BET and GAB
Opis:
Proces rozdrabniania pieprzu powoduje rozwinięcie jego powierzchni, w wyniku czego dochodzić może do zwiększenia dynamiki zjawisk powierzchniowych uwarunkowanych oddziaływaniem z parą wodną. Celem badania była ocena wpływu rozdrobnienia pieprzu czarnego na jego higroskopijność, postrzeganą jako zasadniczy czynnik decydujący o jego stabilności przechowalniczej. Badanie obejmowało wyznaczenie izoterm sorpcji w temperaturze 20°C metodą statyczno-eksykatorową, określenie parametrów procesu adsorpcji i mikrostruktury powierzchni cząstek z wykorzystaniem teoretycznych modeli sorpcji oraz równania Kelvina. Izotermy adsorpcji badanych próbek pieprzu mielonego charakteryzowały się kształtem sigmoidalnym typowym dla powierzchni porowatych, na których zachodzi adsorpcja wielowarstwowa prowadząca do kondensacji kapilarnej. Empirycznie wyznaczone izotermy adsorpcji dobrze opisywał model GAB, który charakteryzował się szerokim zakresem dopasowania danych empirycznych do teoretycznie wyznaczonych wartości oraz wysoką dokładnością. Wyznaczone numerycznie parametry modelu GAB pozwoliły oszacować i porównać parametry mikrostruktury powierzchni badanych próbek pieprzu. Zróżnicowany stopień rozdrobnienia pieprzu czarnego nie powodował znaczącego zróżnicowania jego higroskopijności.
: The grinding of pepper to expand its surface and as a result may occur to increase the dynamics of surface phenomena conditioned by interaction with water vapor. The aim of the study was to evaluate the effect of grinding of black pepper on its hygroscopic properties perceived as an essential factor for the stability of the storage. The study included determination of adsorption isotherms at 20°C by the static-desiccator method, identify the parameters of the adsorption process and the microstructure of the particle surface by means of theoretical models of sorption and Kelvin equation. Adsorption isotherms of ground pepper samples tested were characterized by a sigmoid shape typical of porous surfaces on which there is a multilayer adsorption leading to capillary condensation. Empirically determined isotherms of adsorption were well-described by model GAB, which was characterized by a wide range of empirical data to fit the theoretically determined values and high accuracy. Numerical designated parameters of GAB model evaluated and compare the parameters of the microstructure surface of the tested samples of pepper. Diversified fineness of black pepper does not cause a significant variation of its hygroscopic properties.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Gdyni; 2017, 99; 20-33
1644-1818
2451-2486
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Gdyni
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The determination of potentially allergenicity of selected herbs
Autorzy:
Aninowski, Mateusz
Leszczyńska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/410475.pdf
Data publikacji:
2019
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
profilins
Bet v I
Bet v II
ELISA test
Total Extractable Protein
Bradford
Pierce
profiliny
test ELISA
białko całkowicie ekstrahowalne
Opis:
The aim of the research was to compare the content of allergens in herbs from the Lamiaceae (basil, oregano) and Apiaceae (cumin, fennel, parsley, anise, coriander) family. Herbal plants from conventional and organic crops were subjected to research. In the extracts of herbs, the content of protein as well as the content of Bet v I analogs and profilin were determined using the immunoenzymatic indirect method. Protein content in conventional crops determined by the Bradford method ranges between 160-204 mg/g, and Pierce determined between 105-394 mg/g. In samples of organic herbs the results are as follows: Bradford method 149-196 mg/g, and Pierce method 109-333 mg/g. In the case of plants grown using conventional methods, the content of Bet v I analogues, based on a commercial test, ranged from 0.5 to 1.15 μg/g in method I, whereas in the method developed by us from 0.22 to 0.68 μg/g. In herbs from organic farming, the range of results according to the commercial test is 0.86-1.54 mg/g, and use by the test we developed 0.5-0.63 mg/g. The results of profilin content were as follows: in samples grown with conventional methods, they ranged from 1.00 to 18.13 ng/g, while organics - from 3.27 to 12.62 ng/g. The calculated p-value is less than the assumed α = 0.05, – this result is statistically significant. The correlation between the results of the method I and II in both crops is strongly statistically significant.
Źródło:
Biotechnology and Food Science; 2019, 83, 1; 3-11
2084-0136
2299-6818
Pojawia się w:
Biotechnology and Food Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of reducing agents on the reduced graphene oxide specific surface area determined on the basis of nitrogen adsorption isotherm
Wpływ substancji redukujących na wielkość powierzchni właściwej zredukowanego tlenku grafenu określoną na podstawie izotermy adsorpcji azotu
Autorzy:
Strachowski, T.
Woluntarski, M.
Djas, M.
Kowiorski, K.
Wiliński, Z.
Baran, M.
Jagiełło, J.
Winkowska, M.
Lipińska, L.
Powiązania:
https://bibliotekanauki.pl/articles/192062.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
graphene oxide (GO)
reduced graphene oxide (rGO)
specific surface area
adsorption
BET methods
tlenek grafenu (Go)
zredukowany tlenek grafenu (rGo)
powierzchnia właściwa
adsorpcja
metoda BET
Opis:
The most common way to determine the specific surface of materials is to utilise direct methods, such as the flow method and the adsorptive method with the implementation of the adsorption isotherm equations. In our work we used the Brunauer, Emmet and Teller (BET) equation for the nitrogen adsorption isotherm description. Our goal was to examine the influence of reducing agents on the specific surface area of reduced graphene oxide. Graphene oxide was reduced by thiourea dioxide, thiourea, ammonium thiosulfate and sodium hydrosulfite.
Do określania powierzchni właściwej materiałów najczęściej stosowane są metody bezpośrednie, takie jak metoda przepływowa oraz adsorpcyjna, w której wykorzystywane są równania izotermy adsorpcji. W naszej pracy do określenia powierzchni właściwej zredukowanego tlenku grafenu do opisu wyznaczonej izotermy adsorpcji azotu zastosowano równanie Brunauera, Emmeta i Tellera (BET). Celem niniejszej pracy było zbadanie wpływu substancji redukujących na wielkość powierzchni właściwej zredukowanego tlenku grafenu. Do badań użyto tlenku grafenu redukowanego dwutlenkiem tiomocznika, tiomocznikiem, tiosiarczanem amonu, oraz podsiarczynem sodu.
Źródło:
Materiały Elektroniczne; 2017, T. 45, nr 2-4, 2-4; 6-11
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Viability analysis of pine sawdust drying in a fountain dryer
Autorzy:
Rojcewicz, Konrad
Oksiuta, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/1835551.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
sawdust
fountain dryer
fountain bed
conical spouted bed
pellets
sieving analysis
BET method
Opis:
This article presents an analysis of the physico-chemical properties of pine sawdust originating from the area of the Knyszyńska Forest, in the context of the possibility of the sawdust drying in a fountain dryer. Several tests were carried out on dry pine sawdust with 45% moisture, including chemical composition, calorific value, ash content as well as morphological changes of wet and dried material. The water storage mechanism in chips and the mechanism of formation of a fountain bed were also discussed. Based on the obtained results, several technical solutions and modifications of the fountain dryer were proposed. These modifications enable sawdust of heterogeneous size and shape to be dried in a fountain dryer as well as additional functional properties.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2020, nr 23(3); 263-280
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane aspekty prawidłowego doboru parametrów badania i weryfikacji wyników oznaczeń dla określania modułu sztywności (G0) w metodzie BET
Some aspects of proper selection and verification of the test conditions for BET methods of soil stiffness modulus (G0) determination
Autorzy:
Szczepanski, T.
Godlewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/886968.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
grunty
sztywnosc gruntu
sprezystosc
parametry gleby
modul odksztalcenia postaciowego
metoda BET
Opis:
Wybrane aspekty prawidłowego doboru parametrów badania i weryfikacji wyników oznaczeń dla określania modułu sztywności (G0) w metodzie BET. Artykuł stanowi kontynuację badań mających na celu coraz wiarygodniejsze wykorzystywanie metod do oceny sztywności geomateriałów. Przedstawia analizę i syntezę wyników dotyczących określania prędkości fali poprzecznej przy użyciu piezoelementów typu bender. Na przykładzie dwóch typów gruntów w artykule poruszono aspekty związane z doborem częstotliwości użytych w badaniu fal w zależności od wielkości próbki i prędkości fali oraz wyboru metody interpretacji spośród ogólnie wykorzystywanych z zastosowaniem narzędzi automatyzujących ten proces.
Some aspects of proper selection and verification of the test conditions for BET methods of soil stiffness modulus (G0) determination. One of the main group of methods used recently for establishing soil stiffness characteristics are so called seismic methods (using measurement of elastic waves velocity). Authors experiences show reasonably good correlation of the results obtained with use of different methods, both field and laboratory. One of the aspects, on which authors are working on, is analysis of methodological factors influencing the results, with the aim of more repeatability, reliability, and standardization of some methods, BET being a good example. Aspects of proper choice of waves frequency used during test, sample length influence, using automatic interpretation tools are raised.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2017, 26, 1[75]
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości sorpcyjne produktów ekspandowanych na przykładzie produktów z kaszy jaglanej i amarantusa
Sorption properties of expanded products on the example of millet and amaranth products
Autorzy:
Ruszkowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072639.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
produkty ekspandowane
sorpcja pary wodnej
izoterma sorpcji
BET
expanded products
water vapor sorption
sorption isotherm
Opis:
Określono trwałość preparowanej kaszy jaglanej i amarantusa ekspandowanego, z wykorzystaniem metod sorpcyjnych. Oceny właściwości sorpcyjnych dokonano metodą dynamiczną (określenie kinetyki i szybkości procesu sorpcji) oraz metodą statyczną na podstawie charakterystyki przebiegu izoterm sorpcji pary wodnej w badanych produktach. Stwierdzono, że kinetyka i szybkość procesu sorpcji pary wodnej badanych produktów determinowane były aktywnością wody środowiska oraz początkową zawartością wody w badanych produktach. Wyznaczone izotermy sorpcji badanych produktów miały kształt sigmoidalny i charakteryzowały się podobnym przebiegiem, jednakże produkt II (amarantus) wykazywał nieznacznie wyższą pojemność sorpcyjną w zakresie aktywności wody aw = 0,33÷0,93.
Stability of precooked millet and expanded amaranth was determined using sorption methods. The evaluation of sorption properties was done by dynamic and static methods (determination of kinetics and sorption process rate) on the basis of specific course of sorption isotherms of water vapor in products tested. It was found that kinetics and rate of water vapor sorption of PI and PII were determined by environment water activity and the initial water content in tested products. Designated sorption isotherms of PI and PII had a sigmoidal shape and were characterized by a similar course but the product II showed a slightly higher sorption capacity in the water activity range aw = 0,33÷0,93.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 6; 416--417
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
BBAP amplification profiles of apple varieties
Autorzy:
Speváková, Ivana
Urbanová, Lucia
Kyseľ, Matúš
Bilčíková, Jana
Farkasová, Silvia
Žiarovská, Jana
Powiązania:
https://bibliotekanauki.pl/articles/2086180.pdf
Data publikacji:
2021
Wydawca:
Państwowa Wyższa Szkoła Zawodowa w Tarnowie
Tematy:
Bet v I
allergen
degenerate primer
apple varietie
alergen
zdegenerowany podkład
odmiana jabłek
Opis:
Several types of allergies are currently known and are characterized by an exaggerated response of the immune system to substances from various sources called allergens. One of them is a food allergy, which is becoming more common in the population. For this reason, it is necessary to describe the issue from several aspects including genomic variability of plant allergens. The objective of this study was to analyse intraspecific variability of Bet v 1 of 10 different varieties of apple species (Malus domestica Borkh.). BBAP technique for genomic determination of the presence of Bet v 1 homologs at the DNA level was performed. Degenerate primers that anneal a variable and conserved part of PR-10 protein homologues genes were used in the analyse. Amplicons were generated and formed relatively monomorphic profiles, indicating the stability of the given isoforms of Bet v 1 within the selected apple varieties. To evaluate the potential allergenicity of selected varieties further studies on another molecular level such as a comparison of gene expression of the PR-10 family members and their protein expression levels are needed.
Źródło:
Science, Technology and Innovation; 2021, 13, 2; 1--6
2544-9125
Pojawia się w:
Science, Technology and Innovation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and characterization of ultrafine RDX
Autorzy:
Pant, A.
Nandi, A. K.
Newale, S. P.
Gajbhiye, V. P.
Prasanth, H.
Pandey, R. K.
Powiązania:
https://bibliotekanauki.pl/articles/358126.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
ultrafine RDX
drowning-out crystallization
BET surface area
SEM
mechanical and electrostatic spark sensitivity
Opis:
This paper describes the synthesis of ultrafine Hexogen (UF-RDX) of size <5μm by drowning-out crystallization. RDX was precipitated from acetone or dimethylformamide (DMF) solution by reducing the solvent power using either a miscible, non-aqueous antisolvent, n-hexane, or an aqueous antisolvent, water containing polyethylene glycol (PEG). Process parameters such as solvent/ antisolvent ratio, agitation, ultrasonication etc. were studied. UF-RDX was characterized for Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC) and sensitivity tests. In the case of the non-aqueous antisolvent, the precipitated RDX crystals were rod shaped of diameter <1 μm. For the aqueous antisolvent, oval shaped crystals (<5 μm) were precipitated. UF-RDX was found to be more sensitive to impact and less friction sensitive compared to production grade RDX (60-80 μm).
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 3; 393-407
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effects of particular factors connected with maritime transport on quality and safety of cereal as a cargo
Autorzy:
Ocieczek, Aneta
Mesinger, Dominika
Kaizer, Adam
Zawadzki, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/2098151.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
maritime transport
cereal
food quality
food safety
sorption
BET
GAB
transport morski
zboże
jakość żywności
bezpieczeństwo żywności
sorpcja
Opis:
The article discusses the effect of conditions during maritime transport on particular quality and safety parameters of cereal, in relation to quality management and logistics management. Therefore, transport requirements for cereal as a cargo were identified, and furthermore, threats resulting from improperly conducted logistic proces of bulk material with strong sorption properties were described. The aim of this article was to compare the differences in sorption properties between four selected cereal species using the static desiccator method. This method is the standard reference method. As a result of the conducted research, the existence of significant variability in the sensitivity to the effect of maritime transport conditions among cereal as a product group was identified. The most resistant to water vapor was rye grain. The differences between each cereal species should be associated with variability in the physical structure and chemical composition of grains of each individual cereal species. Further works in this area should take into consideration not only the diversity but also the variability of cereal sensitivity owing to the combined effect of relative humidity of the atmosphere and ambient temperature with use of the indepth thermodynamic analysis of sorption.
Źródło:
Transport Problems; 2021, 16, 2; 19--32
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nano Aluminium Powder (NAP) using a Thermal Plasma: Process Development and Characterization
Autorzy:
Pant, A.
Seth, T.
Raut, V. B.
Gajbhiye, V. P.
Newale, S. P.
Nandi, A. K.
Prasanth, H.
Pandey, R. K.
Powiązania:
https://bibliotekanauki.pl/articles/358835.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
nano aluminium
thermal plasma
DC arc plasma
RF induction plasma
aluminium content
BET surface area
HR-TEM
Opis:
A bottom up approach for the preparation of Nano Aluminium Powder (NAP) using a Transferred Arc Thermal Plasma Reactor (TAPR) is described. The aluminium block is subjected to evaporation by the application of a thermal plasma. The aluminium vapour produced is rapidly quenched to room temperature resulting in crystallization of the aluminium vapour in nano-particulate form. Various process parameters, such as the plasma torch power, reactor pressure and plasma gas composition were optimized. This paper also describes the characterization of NAP by analytical methods, for the estimation of the Active Aluminium Content (AAC), Total Aluminium Content (TAC), XRD, bulk density, BET surface area, HR-TEM etc. The results are compared with those for samples prepared in other thermal plasma reactors, such as the DC Arc Plasma Reactor (DCAPR) and the RF Induction Thermal Plasma Reactor (RFITPR), and for commercially available NAP samples (ALEX, prepared by the EEW technique).
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 53-71
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies