Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "aerobic sludge" wg kryterium: Temat


Tytuł:
Biogranulation and Physical Properties of Aerobic Granules in Reactors at Low Organic Loading Rate and with Powdered Ceramsite Added
Autorzy:
Czarnota, Joanna
Masłoń, Adam
Powiązania:
https://bibliotekanauki.pl/articles/123107.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
aerobic granular sludge
powdered ceramsite
biogranulation
organic loading rate
Opis:
In wastewater treatment, aerobic granular sludge (AGS) technology is a relatively new alternative to the activated sludge method. The biogranulation of biomass ensues when appropriate environmental conditions in a reactor are ensured, and one of the factors determining this is the organic loading rate (OLR). As a literature review suggests, the optimal values of OLR for AGS technology are in the range of 2.50–7.50 g COD/(dm3∙d), the aim of the work detailed here was to evaluate the impact of powdered ceramsite on biogranulation in two Granular Sequencing Batch Reactors (GSBRs) in which OLR was equal to just 2.10 g COD/(dm3∙d) (R1) and 1.0 g COD/(dm3∙d) (R2). The research was carried out in laboratory scale with using synthetic wastewater containing different concentration of organic compounds. In the course of the research, a more intensive process of biogranulation was noted in reactor R1, and mean diameters of granules on the last day of experimentation were 962 and 274 µm for R1 and R2, respectively. While the organic loading rate equal to 2.10 g COD/(dm3∙d) could allow granule formation, the results also pointed that lower food-to-microorganism (F/M) ratios favour biogranulation. This parameter was indirectly affected by the application of powdered ceramsite, because the powdered material improved the sludge sedimentation properties (average values of SVI30 being 30.1±12.8 and 36.9±10.9 cm3/g). The result of this was more-limited leaching of biomass from reactors (with average values for MLVSS at 4.37±1.23 and 3.03±0.67 g/dm3).
Źródło:
Journal of Ecological Engineering; 2019, 20, 9; 202-210
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of the excess sludge pretreatment on biogas productivity
Autorzy:
Bernat, Katarzyna
Zielińska, Magdalena
Kulikowska, Dorota
Cydzik-Kwiatkowska, Agnieszka
Wojnowska-Baryła, Irena
Waszczyłko-Miłkowska, Beata
Piotrowicz, Beata
Powiązania:
https://bibliotekanauki.pl/articles/298334.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
biogas production
sludge pretreatment
activated sludge
aerobic granular sludge
ultrasound disintegration
homogenization
Opis:
To intensify biogas production during anaerobic stabilization of organic matter in sludge, pretreatment is applied. The effect of pretreatment of excess activated sludge (AS) and excess aerobic granular sludge (GS) on biogas productivity (BP) and composition was investigated. The sludge was pretreated with homogenization (6,500 rpm for 0.5 min (H0.5) and 1 min (H1.0)) or ultrasound disintegration at 20 kHz (50% amplitude for 2 min (D50%_2.0) and 4 min (D50%_4.0), and 100% amplitude for 4 min (D100%_4.0)). BP of AS of GS without pretreatment was 603.3±5 dm3/kg TS (793.4±7 dm3/kg VS); that was 200.6±4 dm3/kg TS (480.8±6 dm3/kg VS). With disintegration, the BP of AS increased by 7.8% (650.4±10 dm3/kg TS) (D50%_2.0) and 16.1% (700.6±11 dm3/kg TS) (D100%_4.0), and that of GS increased by 7.0% (214.0±5 dm3/kg TS) (D50%_2.0) and 16.0% (232.8±5 dm3/kg TS) (D100%_4.0). With homogenization, BP increased by 2.0-3.0% (AS) and 1.6-3.2% (GS).
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2019, 22(1); 75-86
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrated Ozone and Anoxic-Aerobic Activated Sludge Reactor for Endek (Balinese Textile) Wastewater Treatment
Autorzy:
Suryawan, I. Wayan Koko
Siregar, Mia Juliana
Prajati, Gita
Afifah, Anshah Silmi
Powiązania:
https://bibliotekanauki.pl/articles/124354.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
low-biodegradable wastewater
ozone oxidation process
anoxic-aerobic activated sludge
Opis:
The endek industry produces low-biodegradable wastewater, which is very difficult to treat using the biological methods. For this reason, this study was aimed at improving the quality of wastewater for endek textile wastewater using the combination of ozone oxidation process as pretreatment and anoxic-aerobic activated sludge. The ozone reactor volume amounted to 3L and the applied ozone dose equaled 0.05 mg/minute. The BOD/COD of endek wastewater increased to 0.38 after ozone treatment and the application of anoxic-aerobic activated sludge treatment. The anoxic-aerobic experiments were conducted in batch process and consisted of activated sludge. Conventional anoxic-aerobic treatment can reach color and COD removal of 30% and 32%, respectively, without pre-treatment. The ozone pretreatment can increase color and COD removal up to 76.6% and 86.9%, respectively. On the basis of the effluent standards of textile wastewater quality, COD, BOD5, and total ammonia (NH3-N) parameters have met the quality standards.
Źródło:
Journal of Ecological Engineering; 2019, 20, 7; 169-175
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biologiczne suszenie osadów ściekowych i organicznej frakcji miejskich odpadów stałych metodą kompostowania w reaktorze okresowym
Biodrying of sewage sludge and organic fraction of municipal solid waste in a batch reactor
Autorzy:
Krzystek, L.
Zawadzka, A.
Ledakowicz, S.
Powiązania:
https://bibliotekanauki.pl/articles/2070536.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
osad ściekowy tlenowy
odpady miejskie stałe
frakcja organiczna odpadów
suszenie biologiczne
aerobic sludge
municipal solid wastes
organic fraction
biodrying
Opis:
Proces biologicznego suszenia prowadzono w tunelu suszarniczym o pojemności 240 dm3, wyposażonym w czujniki do pomiaru wilgotności i temperatury powietrza wlotowego i wylotowego oraz do pomiaru temperatury kompostowanych odpadów. W badaniach wykorzystano tlenowy osad ściekowy i organiczną frakcję stałych odpadów komunalnych o dużej wilgotności początkowej. Uzyskano 50% obniżenie zawartości wilgoci suszonych materiałów.
Experiments of biodrying were performed in the laboratory scale using a horizontal reactor of 240 dm3 of total capacity equipped with sensors to measure: temperature and humidity of composting biomass and temperature of inlet and outlet air. In the investigations a mixture of biodegradable municipal waste of high moisture content and aerobic sludge were used. The results obtained showed 50% decrease of moisture content of dried material.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 3; 65-66
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The performance of extracellular polymeric substance (EPS) on stability of Aerobic granular sludge (AGS)
Autorzy:
Na, Hamiruddin
Na, Awang
Mg, Shaaban
Powiązania:
https://bibliotekanauki.pl/articles/396189.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
aerobic granular sludge
AGS
extracellular polymeric substance
EPS
stability
osad granulowany
substancja polimerowa
stabilność
Opis:
Various article which indicating the Aerobic granular sludge (AGS) instability, particularly in prolonged phase operating duration become a significant obstacle to its implementation. Generally, prolonged the operation period will lost its stability that can degrade performance effectiveness. As AGS stabilization in hydrodynamic shear force and resisting mass transfer resistance within the reactor generally defined or evaluated by microbial community, bioactivity, extracellular polymeric substance (EPS) structure and granular aspect. The aim of this research in order to illustrate the EPS formation on AGS which is preserved at 4°C in sequencing batch reactor (SBR) by sewage for eight months. The effective of granulation method and redevelopment of AGS stability by particular pressure produced with several hydrodynamic shear force and mass transfer resistance which controlled by low organic loading rate (OLR) between 0.26 and 0.81 kg CODs/m³ d with 1.33 cm/s of superficial air velocity (SAV). The confocal laser scanning microscope (CLSM), Fourier transform infrared (FTIR), and energy dispersive X-ray spectrometer (EDX) were implemented to notice the evolution in composition of EPS that revealed the intermolecular interaction helped the aerobic granule stability as seed to achieved the performance of EPS on stability of AGS.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 3; 60-69
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie oraz perspektywy rozwoju technologii granulacji tlenowej w oczyszczaniu ścieków
Application and perspectives of development of aerobic granular sludge technology in wastewater treatment
Autorzy:
Cydzik-Kwiatkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/401545.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
tlenowy osad granulowany
oczyszczanie ścieków
nowe technologie
granule tlenowe
aerobic granular sludge
wastewater treatment
emerging technologies
aerobic granules
Opis:
W ostatnich latach są prowadzone badania nad granulacją biomasy w warunkach tlenowych zarówno w skali laboratoryjnej, jak i technicznej. Granule tlenowe to zwarte, sferyczne zbiorowiska mikroorganizmów, powstające w wyniku samorzutnej immobilizacji. Biomasę granulowaną wyróżniają bardzo dobre właściwości sedymentacyjne, długi wiek osadu oraz możliwość symultanicznego usuwania biogenów w strukturze granuli, co pozwala efektywnie oczyszczać ścieki w pojedynczym reaktorze. W pracy przedstawiono informacje o formowaniu, morfologii i strukturze gatunkowej granul, jak również przytoczono przykłady zastosowania tlenowej biomasy granulowanej do oczyszczania ścieków, w tym zawierających wysokie stężenia związków azotu czy związki toksyczne. Technologia granul tlenowych przedstawiona została jako atrakcyjna ekonomicznie i środowiskowo alternatywa dla systemów opartych o klasyczny osad czynny lub błonę biologiczną. W pracy zaprezentowano dane o instalacjach z granulami tlenowymi w skali technicznej na świecie oraz przedstawiono możliwości zastosowania technologii w warunkach krajowych.
Recently an extensive studies have been carried out on aerobic granular sludge technology in both laboratory and technical scale. Aerobic granules are compact, spherical microbial consortia created by a spontaneous immobilization. Amongst their advantages are a very good settling ability, long biomass age and simultaneous pollutant removal in the granule structure that enables full biological treatment of wastewater in a single reactor. This review outlines up-to-date information on granule formation, morphology, microbial structure as well as on the applications of aerobic granular sludge technology for wastewater treatment including the treatment of high-nitrogen wastewater with a low COD/N ratio and wastewater of high toxicity. Aerobic granular sludge technology is presented as both environmentally and financially attractive alternative to wastewater treatment systems based on activated sludge or biofilm. This paper also reports on already existing full-scale installations in world and seeks to explore the potential of aerobic granular sludge within the Polish conditions.
Źródło:
Inżynieria Ekologiczna; 2014, 38; 156-166
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of calcium, magnesium and iron ions on the molecular mass of exoproteins during biogranulation
Autorzy:
Kończak, Beata
Miksch, Korneliusz
Powiązania:
https://bibliotekanauki.pl/articles/2034057.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aerobic granular sludge
extracellular protein
SDS-PAGE
divalent cations
multivalent
cations
tlenowy ziarnisty osad
białko zewnątrzkomórkowe
STRONA SDS
kationy dwuwartościowe
kationy
Opis:
In this study, we performed the qualitative analysis of exoproteins during granule formation in the presence or in the absence of cations. The staining of thin granule cryosections showed that nucleic acids, proteins, polysaccharides and calcium cations were the dominant components of the granules. Proteins are the structural components associated with calcium ions. We determined changes in the proteomic profile and tightly bound extracellular polymeric substances (EPS) of the slime. The exopolymeric matrix containing the proteins was extracted using the Dowex resin method. Proteomic profile was analysed by SDS-PAGE method (sodium dodecyl sulphate polyacrylamide gel electrophoresis) using Coomassie blue staining in the samples of the aerobic granule matrix formed in the presence of multivalent cations and compared with that of the aerobic granules cultivated without cations. The results indicate that the granule matrix is predominantly composed of large and complex proteins that are tightly bound within the granular structure. The tightly bound extracellular polymeric substances (TB-EPS) may play a role in improved mechanical stability of aerobic granules. In the supernatant fraction of the sludge, only a small amount of free proteins in the medium molecular mass range was detected. The protein with high molecular mass ( 116 kDa) produced in the reactors with added Ca2+. Ca2+ had a considerable regulatory influence on production of extracellular proteins during aerobic granulation.
Źródło:
Chemical and Process Engineering; 2020, 41, 4; 257-266
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Quality of Stabilized Municipal Sewage Sludge
Autorzy:
Bartkowska, Izabela
Biedka, Paweł
Tałałaj, Izabela Anna
Powiązania:
https://bibliotekanauki.pl/articles/124921.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
autothermal thermophilic aerobic digestion
digestion of sludge
natural utilization of sludge
sludge
Opis:
The sludge management of many wastewater treatment plants in Poland has not been properly solved yet. The exploiters and designers often have to cope with the dilemma of choosing the method of processing and neutralizing sewage sludge. The method discussed in the article is only one of the options that fully fits in the trends of implementing good practices in the management of sewage sludge. It is a technologically and economically effective as well as environmentally friendly process. It contributes significantly to minimizing the amount of sewage sludge and allows the production of organic fertilizer instead of waste. The work discusses the quality of sewage sludge after autothermal thermophilic stabilization (ATAD). The results of investigations pertaining to the reaction of sludge, dry mass, dry organic matter, content of biogenic substances, calcium and magnesium compounds and heavy metals were analyzed.
Źródło:
Journal of Ecological Engineering; 2019, 20, 2; 200-208
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in hydrogen ion exponent of sewage sludge in the process of autothermal thermophilic aerobic digestion
Autorzy:
Bartkowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/124965.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
activated sludge
hydrogen ion exponent
sewage sludge
sludge processing
thermophilic aerobic digestion
Opis:
This paper presents a study on the evaluation of digested sewage sludge during the process of Autothermal Thermophilic Aerobic Digestion (ATAD), taking place as a three-tank process at a municipal waste water treatment plant in Luban, Poland. ATAD installation was manufactured by FUCHS Enprotec GmbH Mayen-Deutschland. Over the period from June 2006 to February 2010 sewage sludge digested by tha ATAD-Process was examined. The hydrogen ion exponent was measured in every tank. The results obtained indicated changes in the composition of the digesting sludge at successive stages of the process. Over the study period the ATAD-installation was in both a two- and a three-stage process. pH of sludge under study during the process of the thermophilic stabilisation changes and its value grows significantly, with the installation working in a two-stage arrangement from 6,63 to 7,99, and when the installation was operated as a three-stage system from 6,60 to 8,14. The results collected were subject to the statistical analysis. The paper presents conclusions drawn from the study and own experience.
Źródło:
Journal of Ecological Engineering; 2014, 15, 1; 32-37
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Aerobic Stabilization of Sewage Sludge on PAHs Concentration in Reject Waters
Autorzy:
Kozak, Jolanta
Włodarczyk-Makuła, Maria
Popenda, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/1839628.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
PAHs
municipal sewage sludge
coking sewage sludge
reject water
aerobic stabilization
Opis:
In the paper, the results of studies on changes in the concentration of selected polycyclic aromatic hydrocarbons (PAHs) in the reject water coming from aerobic stabilization of sewage sludge process were given. The sewage sludge samples originating from a treatment of municipal wastewater treatment plant and an industrial coking wastewater treatment plant were investigated. A technological study was conducted using a municipal sewage sludge (control sample) and a mixture of municipal and industrial sewage sludge simultaneously. Aerobic stabilization of sewage sludge process was carried out for 21 days. The concentration of PAHs was determined at the beginning of the experiment (day 0) and in seven-day intervals: after 7, 14 and 21 days. The initial concentration of PAHs in the reject water coming from the municipal sewage sludge was over 44 g/dm3. Industrial sewage sludge was heavily loaded with polycyclic aromatic hydrocarbons. In a reject water of the mixture of municipal and industrial sludge, the initial content of PAHs reached over 5200 g/dm3. During aerobic stabilization of sewage sludge, a decrease in PAHs concentration in reject water was observed. After 21 days of the experiment, the decrease of the sum of analyzed PAHs was in the range of 62–98%.
Źródło:
Journal of Ecological Engineering; 2021, 22, 4; 27-35
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wybranych parametrów technologicznych procesu autotermicznej tlenowej stabilizacji osadów (atso) na przykładzie oczyszczalni ścieków w Lubaniu
Evaluation of chosen technical parameters of autoheated thermophilic aerobic digestion (atad) of sludge in lubań wastewater treatment plant
Autorzy:
Bartkowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/401167.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
autotermiczna tlenowa stabilizacja osadów ściekowych
higienizacja osadów ściekowych
wykorzystanie osadów ściekowych w rolnictwie
autoheated thermophilic aerobic digestion of sewage sludge
hygienization of sewage sludge
application of sewage sludge in agriculture
Opis:
W artykule przedstawiono badania nad oceną parametrów technologicznych procesu autotermicznej termofilnej stabilizacji osadów ściekowych (ATSO), przebiegającego w układzie trzyzbiornikowej instalacji, pracującej na oczyszczalni ścieków w Lubaniu. Badania jakościowe osadów poddawanych procesowi ATSO wykonywane były od czerwca 2006r. Przedstawiono przebieg zmian temperatury osadów, rejestrowanej w sposób ciągły w każdym reaktorze instalacji. Kontrolowano osady pod względem zawartości ich suchej masy, z uwzględnieniem udziału substancji organicznych i mineralnych oraz wartość odczynu pH. Przedstawione zostały wnioski, wynikające z przebiegu badań i własnych doświadczeń, dotyczące przydatności omawianego procesu do unieszkodliwiania osadów ściekowych.
The article examines evaluation of technical parameters of the process of autoheated thermophilic aerobic digestion (ATAD) of sewage sludge in a three-tank installation operating in a wastewater treatment plant in Lubań. From the June 2006 sludge treated by ATAD process was examined for quality. There was presented course of temperature changes recorded constantly in each reactor of the installation. Sludge was examined with regard to dry solids content, taking into consideration presence of organic and mineral substances, and pH power hydrogen reaction value. Conclusions were presented, resulting from the course of examinations as well as from own author's experience, concerning usefulness of the discussed process for sewage sludge treatment.
Źródło:
Inżynieria Ekologiczna; 2011, 25; 7-19
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza skuteczności unieszkodliwiania osadów sciekowych w procesie autotermicznej tlenowej stabilizacji (atso) na przykładzie oczyszczalni ścieków w Giżycku
Efficiency analysis of sewage sludge treatment by means of autoheated thermophilic aerobic digestion (atad) on the example of wastewater treatment plant in Giżycko
Autorzy:
Bartkowska, I.
Wawrentowicz, D.
Powiązania:
https://bibliotekanauki.pl/articles/401260.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
autotermiczna tlenowa
stabilizacja osadów ściekowych
higienizacja osadów ściekowych
wykorzystanie osadów ściekowych w rolnictwie
autoheated thermophilic aerobic digestion of sewage sludge
hygienization of sewage sludge
application of sewage sludge in agriculture
Opis:
W artykule przedstawiono próbę analizy skuteczności procesu autotermicznej tleno- wej stabilizacji osadów ściekowych (ATSO) w ich unieszkodliwianiu, umożliwiającym powrót do naturalnego środowiska, na przykładzie oczyszczalni ścieków w Giżycku. Badania jakościowe osadów poddawanych procesowi ATSO wykonywane były od października 2003r. Przedstawiono wnioski wynikające z analizy zgromadzonych wyników badań. Szczególną uwagę zwrócono na produkt końcowy realizowanego procesu.
The article attempts to analyze the efficiency of Autoheated Thermophilic Aerobic Digestion (ATAD) in sewage sludge treatment, allowing reentry of sewage sludge to the environment, on the example of wwtp Giżycko. Quality examinations of sludge exposed to ATAD had been carried out since October 2003. Presented conclusions are based on analysis of results of the examinations. Particular attention has been paid to the final product of the process.
Źródło:
Inżynieria Ekologiczna; 2011, 25; 165-175
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stabilizacja tlenowa osadów komunalnych i przemysłowych
Oxygen stabilization of municipal and industrial sewage sludges
Autorzy:
Popenda, Agnieszka
Kozak, Jolanta
Włodarczyk-Makuła, Maria
Powiązania:
https://bibliotekanauki.pl/articles/126565.pdf
Data publikacji:
2019
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
osady ściekowe
stabilizacja tlenowa
osady komunalne
osad przemysłowy
sewage sludges
aerobic stabilization
municipal sewage sludge
industrial sewage sludge
Opis:
Stabilizacja tlenowa jest jednym ze sposobów przeróbki osadów ściekowych powstających w procesie oczyszczania ścieków. Celem procesu jest utlenianie związków biodegradowalnych oraz polepszenie właściwości osadów poprzez zmniejszenie uwodnienia, a także w pewnym stopniu higienizacja osadów przed ich dalszym zagospodarowaniem. Osady ściekowe z komunalnych oczyszczalni ścieków, do których dopływa mieszanina ścieków bytowych i przemysłowych, charakteryzują się wysokim uwodnieniem, dużą zawartością łatwo rozkładalnych substancji organicznych, organizmów chorobotwórczych, a także zróżnicowaną ilością antropogennych związków trudno rozkładalnych. Natomiast osady ściekowe pochodzące z oczyszczalni przemysłowych zawierają mniej składników organicznych biodegradowalnych, co sprawia, że trudniej zagniwają, lecz zwykle lepiej się odwadniają. Ponadto zawierają, w zależności od rodzaju przemysłu, domieszki substancji specyficznych, często toksycznych dla biocenozy biorącej udział w biologicznym oczyszczaniu. Celem badań było przeanalizowanie przebiegu procesu stabilizacji tlenowej mieszaniny osadu pochodzącego z komunalnej oczyszczalni ścieków oraz osadu wydzielonego ze ścieków koksowniczych. Osad komunalny pobrano z oczyszczalni miejskiej o wielkości przekraczającej równoważną liczbę mieszkańców RLM 100 000, natomiast przemysłowy - z zakładowej biologicznej oczyszczalni ścieków. Stabilizację prowadzono w otwartych komorach tlenowych z ciągłym napowietrzaniem przez 21 dni. Przebieg procesu stabilizacji kontrolowano czterokrotnie (w odstępach 7 dniowych), analizując wybrane wskaźniki fizyczno-chemiczne, takie jak: pH, ChZT, kwasowość, zasadowość w cieczach nadosadowych oraz uwodnienie, suchą masę i straty przy prażeniu w osadach ściekowych.
Aerobic stabilization is one of an option of sewage sludges treatment. The aim of the stabilization process is to change physical-chemical parameters, mainly decomposition of biodegradable compounds, decrease of water content and partial hygienisation of sewage sludge before the further treatment. Municipal sewage sludges have high water content, high concentration of easily degradable organic compounds, pathogens and various amount of anthropogenic compounds persistent to degradation process. In contrast, industrial sewage sludges have lower concentration of easily degradable organic compounds resulting in more persistent digestion but they can be easily dewatered. Furth more, sludges, depending to the type of industry, contain additives of specific substances that are usually toxic for biocenosis taking part in biological treatment. The aim of the study was to analyze process of aerobic stabilization using mixture of sludge originating from a municipal wastewater treatment plant as well as sludge coming from a coke plant treatment. Municipal sewage sludge samples were taken from the treatment plant exceeding 100 000 equivalent number of inhabitants, whereas industrial sewage sludge comes from a biological industrial wastewater treatment. The stabilization process was carried out in opened chambers with continuous oxygenation over 21 days. The process of stabilization was controlled four times (in seven day intervals). The selected physical-chemical parameters such as: pH, chemical oxygen demand, acidity, alkalinity were analyzed in supernatants, whereas water contents, dry and organic matter content were determined in sewage sludges.
Źródło:
Proceedings of ECOpole; 2019, 13, 1-2; 145-154
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ kondycjonowania osadów ściekowych kwasem nadoctowym na zmiany ich właściwości fizyczno-chemicznych
Effect of conditioning with peracetic acid on selected physicochemical properties of the sludge
Autorzy:
Wołczyński, M.
Wiśniowska, E.
Janosz-Rajczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/296989.pdf
Data publikacji:
2009
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
kwas nadoctowy
osady ściekowe
stabilizacja tlenowa osadów
peracetic acid
sewage sludge
aerobic digestion
Opis:
Przedstawiono wyniki badań wpływu kwasu nadoctowego na przebieg stabilizacji tlenowej osadów ściekowych (mieszanina 1:1, v/v osadu nadmiernego i surowego). Stabilizację tlenową prowadzono w skali laboratoryjnej, w trzech reaktorach o objętości 12 dm3. Do osadu w reaktorze kontrolnym (R1) nie wprowadzano kwasu nadoctowego. Do reaktora R2 wprowadzono 2 cm3 CH3COOOH/dm3 osadów na początku stabilizacji, a następnie po 6 dniach dodatkowo 1, a po 11 dniach 0,5 cm3 CH3COOOH. Do reaktora R3 wprowadzono jednorazowo 20 cm3 CH3COOOH przed rozpoczęciem stabilizacji osadów. Proces stabilizacji tlenowej prowadzono przez 21 dni. Zawartość reaktorów była mieszana za pomocą powietrza doprowadzanego przez dyfuzory umieszczone na dnie reaktorów. Wprowadzane powietrze służyło równocześnie za źródło tlenu do procesu stabilizacji. Stężenie tlenu rozpuszczonego utrzymywano na poziomie 2 mg/dm3. Proces prowadzono w temperaturze pokojowej (21 ± 1 ° C). W celu przebiegu stabilizacji w osadzie lub cieczy nadosadowej oznaczano zawiesiny ogólne i organiczne, indeks Mohlmanna, czas ssania kapilarnego, pH oraz ChZT. Przeprowadzone badania pozwoliły stwierdzić, że wprowadzanie CH3COOOH do osadów stabilizowanych tlenowo spowalniało przebieg procesu w porównaniu z próbką kontrolną. Dodanie kwasu nadoctowego pogarszało również podatność osadów na odwadnianie. W cieczy nadosadowej osadu, do którego wprowadzono 20 cm3 CH3COOOH, zaobserwowano znaczący wzrost ChZT. Zmiany we właściwościach fizyczno-chemicznych osadów stabilizowanych chemicznie pozwalają stwierdzić, że kwas nadoctowy powodował utlenienie części zawiesin organicznych osadów przy równoczesnej inaktywacji mikroorganizmów osadu.
The study presents the results of investigations on aerobic digestion of excess and raw sludge mixture (1:1, v/v) in the presence of peracetic acid (PAA). Aerobic digestion of the sludge was performed in laboratory scale, in three bath reactors (12 L volume each). To the first (blank) reactor (R1) no oxidant was introduced. To the second one (R2) 2, 1 and 0.5 mL of CH3COOOH were added at the beginning of stabilization, after 6 and 11 days, respectively. To the third reactor (R3) 20 mL of CH3COOOH was added before aerobic digestion. Digestion was continued for 21 days. Content of all reactors was mixed and aerated with air introduced in the bottom of the reactor through diffusers. Dissolved oxygen concentration was set at 2 mg.L-1. Process was performed at temperature 20 ± 1 ° C. Total suspended solids (TSS), volatile suspended solids (VSS), sludge volume index (SVI), capillary suction time (CST), pH and chemical oxygen demand (COD) were analysed in the sludge to monitor the progress of stabilization process. It can be concluded that application of peracetic acid didn't improve the aerobic digestion compared to classical process (blank reactor). Peracetic acid application worsens dewatering properties of the sludge. Significant increase of COD value in supernatant was also observed when 20 mL of CH3COOOH was added. Application of CH3COOOH caused oxidation of the part of organic solids in the sludge and inactivation of microorganisms.
Źródło:
Inżynieria i Ochrona Środowiska; 2009, 12, 1; 51-63
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concentration of Hydrocarbons in Reject Waters During Aerobic Stabilization of Sewage Sludge
Stężenie WWA w cieczach nadosadowych w procesie stabilizacji tlenowej osadów ściekowych
Autorzy:
Włodarczyk-Makuła, Maria
Popenda, Agnieszka
Kozak, Jolanta
Powiązania:
https://bibliotekanauki.pl/articles/1812018.pdf
Data publikacji:
2019
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
PAHs
reject water
municipal sewage sludge
coking sewage sludge
aerobic stabilization
WWA
ciecze nadosadowe
osady ściekowe komunalne
osady koksownicze
stabilizacja tlenowa
Opis:
The article presents the concentrations of selected polycyclic aromatic hydrocarbons (PAHs) in reject water during aerobic stabilization of sewage sludge process. The investigations were carried out in parallel for two samples i.e. for sewage sludge samples coming from a treatment of municipal wastewater treatment plant (control sample) and for mixture of municipal and industrial sludge. The aerobic stabilization process was carried out for 21 days. The concentration of 5-ring and 6-ring PAHs was determined at the beginning of the experiment (day 0) and in seven-day intervals: after 7, 14 and 21 days, respectively. The initial contents of PAHs was equal to 23 μg/L and 29.1 μg/L respectively in reject water from municipal and mixture sludge. During aerobic stabilization process the decrease in the concentration of studied PAHs in reject water was observed. At the end of carrying the aerobic stabilization process the decrease of the total concentration of PAHs achieved 78% in municipal reject water, whereas in coke reject water reached the value of 38%, respectively.
W artykule przedstawiono stężenia wybranych wielopierścieniowych węglowodorów aromatycznych WWA w cieczach nadosadowych w procesie stabilizacji tlenowej osadów ściekowych. Badania prowadzono z wykorzystaniem osadów powstających podczas oczyszczania ścieków komunalnych oraz ścieków koksowniczych. Badania technologiczne prowadzono równolegle dla dwóch próbek, tzn. osadów komunalnych (próbka kontrolna) oraz mieszaniny osadów komunalnych z przemysłowymi. Proces stabilizacji tlenowej był prowadzony przez 21 dób. Stężenie 5- oraz 6- pierścieniowych WWA oznaczano na początku badań, dwukrotnie podczas trwania procesu stabilizacji oraz po upływie 21 dób. Początkowe stężenie WWA wynosiło 23 μg/L i 29,1 μg/L odpowiednio w cieczach nadosadowych z osadów komunalnych i z osadów mieszanych. Podczas stabilizacji tlenowej osadów odnotowano spadek stężenia WWA w cieczach nadosadowych. Po zakończeniu procesu stabilizacji tlenowej osadów spadek sumarycznej ilości badanych WWA był na poziomie 78% w przypadku osadów komunalnych i 38% – w przypadku osadów mieszanych.
Źródło:
Rocznik Ochrona Środowiska; 2019, Tom 21, cz. 2; 1318-1327
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies