Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Response Surface Methodology" wg kryterium: Temat


Tytuł:
A combined method for wind power generation forecasting
Autorzy:
Le, Tuan-Ho
Powiązania:
https://bibliotekanauki.pl/articles/1955200.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
autoregressive integrated moving average
exponential smoothing methods
forecasting
response surface methodology
wind power
autoregresyjna zintegrowana średnia ruchoma
metody wygładzania wykładniczego
prognozowanie
metodologia powierzchni odpowiedzi
energia wiatrowa
Opis:
Most of the existing statistical forecasting methods utilize the historical values of wind power to provide wind power generation prediction. However, several factors including wind speed, nacelle position, pitch angle, and ambient temperature can also be used to predict wind power generation. In this study, a wind farm including 6 turbines (capacity of 3.5 MW per turbine) with a height of 114 meters, 132-meter rotor diameter is considered. The time-series data is collected at 10-minute intervals from the SCADA system. One period from January 04th, 2021 to January 08th, 2021 measured from the wind turbine generator 06 is investigated. One period from January 01st, 2021 to January 31st, 2021 collected from the wind turbine generator 02 is investigated. Therefore, the primary objective of this paper is to propose a combined method for wind power generation forecasting. Firstly, response surface methodology is proposed as an alternative wind power forecasting method. This methodology can provide wind power prediction by considering the relationship between wind power and input factors. Secondly, the conventional statistical forecasting methods consisting of autoregressive integrated moving average and exponential smoothing methods are used to predict wind power time series. Thirdly, response surface methodology is combined with autoregressive integrated moving average or exponential smoothing methods in wind power forecasting. Finally, the two above periods are performed in order to demonstrate the efficiency of the combined methods in terms of mean absolute percent error and directional statistics in this study.
Źródło:
Archives of Electrical Engineering; 2021, 70, 4; 991-1009
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A comparative study of face milling of D2 steel using AL2O3 based nanofluid minimum quantity lubrication and minimum quantity lubrication
Autorzy:
Ahsan Ul Haq, Muhammad
Khan, Aqib Mashood
Gong, Le
Xu, Tao
Meng, Longhui
Hussain, Salman
Powiązania:
https://bibliotekanauki.pl/articles/103049.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
face milling
temperature
response surface methodology
steel
temperatura
metodologia powierzchni odpowiedzi
stal
Opis:
This study aims to investigate the effects of process parameters: feed, depth of cut and flow rate, on the temperature during face milling of the D2 tool steel under two different lubricant conditions, Minimum Quantity Lubrication (MQL) and Nano fluid Minimum Quantity Lubrication (NFMQL). Deionized water with the flow rate range 200–400 ml/h was used in MQL. 2% by weight concentration of Al2O3 nano particles with deionized water as a base fluid used as NFMQL with the same flow rate. Response surface methodology RSM central composite design CCD was used to design experiment run, modeling and analysis. ANOVA was used for the adequacy and validation of the system. The comparison shows that NFMQL condition reduced temperature more efficiently during machining.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 1; 99-105
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ability of Response Surface Methodology to Optimize Photocatalytic Degradation of Amoxicillin from Aqueous Solutions Using Immobilized TiO2/Sand
Autorzy:
Sulaiman, Fadia A.
Alwared, Abeer I.
Powiązania:
https://bibliotekanauki.pl/articles/2086434.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
amoxicillin
solar photocatalyst
immobilized TiO2
sand
RSM
response surface methodology
kinetics
Opis:
The response surface method was applied to optimize operational factors in the solar photocatalytic process on the removal of Amoxicillin (AMOX) residues from aqueous solution using TiO2 immobilized on the sand as a catalyst. The results reveal that the degradation percentage of AMOX is 93.12%, when optimal conditions of pH=5, 75 mg/l of TiO2, 400 mg/l of H2O2, and 10 mg/l of AMOX concentration at 150 min irradiation time were used. Furthermore, the model’s expected response results have reasonable similarity with the actual data (R2 = 93.58%), demonstrating the efficiency of this method in making an accurate prediction. A second-order polynomial multiple regression model was used to evaluate the responses, which confirms that was a satisfactory adjustment with the achieved data through analysis of variance (R2 = 93.58%, R2adj = 91.48% and R2pred =89.68%). In addition, it is observed that the removal of undesirable compounds follows a pseudo-2nd order kinetic model with R2 = 0.9862. In conclusion, with the ease of usage of immobilized TiO2 and good photocatalytic efficiency, the findings showed the potential application to the antibiotics from an aqueous solution.
Źródło:
Journal of Ecological Engineering; 2022, 23, 5; 293--304
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Factors Influencing Dry Sliding Wear Behaviour of Laser Remelted Plasma Sprayed Mo Coating Using Response Surface Methodology
Autorzy:
Manjunatha, S. S.
Manjaiah, M.
Basavarajappa, S.
Powiązania:
https://bibliotekanauki.pl/articles/356714.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser remelting
plasma spray
central composite design (CCD)
response surface methodology (RSM)
Mo coating
Opis:
Plasma spraying is a process widely used to fabricate wear resistant coatings. However, various problems are associated with plasma spraying out of which poor bonding strength between the coating and the substrate and the high porosity in the as sprayed coatings are of major concern. In order to eliminate these problems and enhance wear performance, the laser remelting process has been used. The laser remelting of plasma sprayed Mo coatings alters the wear mechanism and improves the wear resistance. The wear mechanism and wear volume loss depend on the applied load, sliding speed and sliding distance. Hence, an effort has been made to investigate the effect of process parameters on volume loss using Response Surface Methodology (RSM) based mathematical models. The experiments were planned as per Central Composite Design (CCD). The investigations revealed that the applied load was the most dominant factor affecting the volume loss of the coating. The sliding speed, sliding distance and interaction effects were considered as the next important parameters influencing the volume loss. The investigation also reveals that, the wear volume loss depends on two wear mechanisms, one being the formations of grooves along surface tribo films and other being fracture of splats with delamination of the coating.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 217-225
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the effect of wire electric dischage machining process parameters on the formation of high speed steel form tool
Autorzy:
Ishfaq, Kashif
Mufti, Nadeem Ahmad
Jawad, Muhammad
Sajid, Muhammad
Jahanzaib, Mirza
Powiązania:
https://bibliotekanauki.pl/articles/103183.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
wire electrical discharge machining (WEDM)
response surface methodology (RSM)
ANOVA
material removal rate (MRR)
surface roughness (Ra)
wycinanie elektroerozyjne drutem
metoda powierzchni odpowiedzi (RSM)
wskaźnik usuwania materiału (MRR)
chropowatość powierzchni (Ra)
Opis:
The use of form tools is growing in industry, owing to their inherent advantage of improving productivity. However, the accurate formation of form tool profile is a really tedious task. In this research work, wire electric discharge machining (WEDM) process has been used for the generation of a form tool. Pulse on-time, pulse off-time, servo voltage, wire tension, flushing pressure have been considered as input parameters, whereas tool geometry (clearance angle, included angle), surface roughness and material removal rate are the selected responses. Response surface methodology (RSM) (Box Bhenken experimental design) technique has been used for design of experiments. Analysis of Variance (ANOVA) has shown that pulse on-time and pulse off-time are the two influential control factors for material removal rate (MRR), surface roughness (Ra), clearance angle and included angle. Contour plot analysis has been performed to find out the optimal ranges of the most influential control factors for each response characteristics.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 1; 89-98
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of central composite design for the optimization of photodestruction of a textile dye using UV/S2O82- process
Autorzy:
Khataee, A.R.
Powiązania:
https://bibliotekanauki.pl/articles/778871.pdf
Data publikacji:
2009
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
planowanie doświadczeń
metodologia powierzchni odpowiedzi
dekoloryzacja
experimental design
response surface methodology
decolorization
C. I. Basic Red 46
K2S2O8
Opis:
The photooxidative destruction of C. I. Basic Red 46 (BR46) by UV/S2O82- process is presented. Central Composite Design (CCD) was employed to optimize the effects of operational parameters on the photooxidative destruction efficiency. The variables investigated were the initial dye and S2O82- concentrations, reaction time and distance of the solution from UV lamp. The predicted values of the photodestruction efficiency were found to be in good agreement with the experimental values (R2 = 0.9810, Adjusted R2 = 0.9643). The results of the optimization predicted by the model showed that the maximum decolorization efficiency (>98%) was achieved at the optimum conditions of the reaction time 10 min, initial dye concentration 10 mg/l, initial peroxydisulfate concentration 1.5 mmol/l and distance of UV lamp from the solution 6 cm. The figure-of-merit electrical energy per order (EEo) was employed to estimate the electrical energy consumption and related treatment costs.
Źródło:
Polish Journal of Chemical Technology; 2009, 11, 4; 38-45
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of response surface methodology and fuzzy logic based system for determining metal cutting temperature
Autorzy:
Tanikić, D.
Marinković, V.
Manić, M.
Devedžić, G.
Ranđelović, S.
Powiązania:
https://bibliotekanauki.pl/articles/199818.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
machining
cutting temperature
infrared thermography
response surface methodology
fuzzy logic
obróbka
temperatura cięcia
termografia w podczerwieni
metodologia odpowiedzi powierzchni
logika rozmyta
Opis:
The heat produced in metal cutting process has negative influence on the cutting tool and the machined part in many aspects. This paper deals with measurement of cutting temperature during single-point dry machining of the AISI 4140 steel, using an infrared camera. Various combinations of cutting parameters, i.e. cutting speed, feed rate and depth of cut lead to different values of the measured cutting temperature. Analysis of the measured data should explain the trends in temperature changes depending on changes in the cutting regimes. Furthermore, the temperature data is modelled using response surface methodology and fuzzy logic. The models obtained should determine the influence of cutting regimes on cutting temperature. The main objective is the reduction of cutting temperature, i.e. enabling metal cutting process in optimum conditions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 2; 435-445
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Response Surface Methodology for Optimization of Permeabilization Process of Baker’s Yeast
Autorzy:
Trawczyńska, I.
Wójcik, M.
Powiązania:
https://bibliotekanauki.pl/articles/778342.pdf
Data publikacji:
2014
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
permeabilization
baker's yeast
response surface methodology
isopropyl alcohol
Opis:
Permeabilization was used for the purpose of transforming the cells of microorganisms into biocatalysts with an enhanced enzyme activity. Baker’s yeast cells were permeabilized with various organic solvents. A high degree of catalase activity was observed upon permeabilization with acetone, chloroform, isopropyl alcohol and ethyl acetate. Response surface methodology was used to model the effect of concentration of isopropyl alcohol, temperature and treatment time on the permeabilization of baker’s yeast cells to maximize the decomposition of H2O2. The optimum operating conditions for permeabilization were observed at 53.7% concentration of isopropyl alcohol, treatment time of 40 min and temperature of 15.6oC. A maximum value of catalase activity was found to be 6.188 U/g wet wt. and was ca. 60 times higher than the catalytic activity of yeast not treated by the permeabilization process.
Źródło:
Polish Journal of Chemical Technology; 2014, 16, 2; 31-35
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of response surface methodology to improve methane production from jerusalem artichoke straw
Autorzy:
Meng, Yan
Li, Yi
Chen, Laisheng
Han, Rui
Powiązania:
https://bibliotekanauki.pl/articles/2203117.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Jerusalem artichoke straw
anaerobic digestion
response surface methodology
methane production
topinambur
słonecznik bulwiasty
fermentacja beztlenowa
produkcja metanu
RSM
Opis:
Anaerobic digestion (AD) converts organic matter and biomass waste into biogas, making it an environmentally friendly technology to improve energy resources for a wide range of applications. Jerusalem artichoke straw (JAS) has an enriched content of cellulose and exhibits a high potential for methane production. AD-based production of methane can eff ectively utilize waste JAS. This study investigated the AD performance of JAS to explore the enhancement of methane yields by employing a Box-Behnken experimental design (BBD) of response surface methodology (RSM). The overall goal was to identify the optimal levels of pretreatment factors, including HCl concentration, pretreatment time, and pretreatment temperature, for producing optimal biomethane yields from JAS. The highest value of methane production achieved was 256.33 mL g-1VS by using an optimal concentration of HCl as 0.25 M, a pretreatment time of 10 h, and a pretreatment temperature of 25°C. These results inform the future application of JAS in enhanced methane production.
Źródło:
Archives of Environmental Protection; 2022, 48, 3; 70--79
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cactus and Holm Oak Acorn for Efficient Textile Wastewater Treatment by Coagulation-Flocculation Process Optimization Using Box-Benhken Design
Autorzy:
Adachi, Abderrazzak
Soujoud, Radouane
El Ouadrhiri, Faiçal
Tarik, Moubchir
Hmamou, Anouar
Eloutassi, Noureddine
Lahkimi, Amal
Powiązania:
https://bibliotekanauki.pl/articles/24202904.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
coagulation-flocculation
textile wastewater
response surface methodology
decolorization
cactus
holm oak acorn
Opis:
In this study, the effectiveness of using natural bio-coagulants and bio-flocculants to treat textile wastewater through the coagulation-flocculation method was examined. These bio-based agents have several advantages over chemical agents, including biodegradability, natural abundance, low toxicity, and low cost. A bio-coagulant (holm oak acorn (HOA)) and a bio-flocculant (cactus juice) were used to investigate the capacity for turbidity removal and decolorization of textile wastewater. The UV spectrophotometer was used to characterize the discharges before and after treatment, and the chemical oxygen demand (COD) and biological oxygen demand (BOD5) levels were calculated. Box-Behnken design (BBD) coupled with response surface methodology (RSM) were utilized to optimize the process and reduce turbidity and decolorization in textile wastewater. The obtained results show that under the optimal conditions (0.5 g•L-1 of HOA, 15 mL•L-1 of cactus juice, and a pH of 7), decolorization and turbidity removal were achieved at 69% and 90%, respectively. This study demonstrates the potential of using bio-coagulants and bio-flocculants in the treatment of textile wastewater.
Źródło:
Journal of Ecological Engineering; 2023, 24, 6; 315--328
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization and Optimization study of Epiphyllum oxypetalum extract as corrosion inhibitor for mild steel in 3 M H2SO4 solutions
Autorzy:
Emembolu, L. N.
Onukwuli, O. D.
Okafor, V. N.
Powiązania:
https://bibliotekanauki.pl/articles/1030954.pdf
Data publikacji:
2020
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Acid corrosion
Epiphyllum oxypetalum extract
Optimization
Photochemical
Response Surface Methodology
Opis:
This study investigated characterization of Epiphyllum oxypetalum (EO) leaf extracts and optimization of process variables on inhibition of mild-steel in 3 M H2SO4 aggressive environment. Response Surface Methodology (RSM) was employed to examine the influence of process variables namely acid concentration (1.0 – 3.0 mols), inhibitor concentration (0.2 – 1.0 g/l), time (1–10 hr) and temperature (303 -343K) on inhibition efficiency. The results of phytochemical screening showed that organic components present in EO extract as a good inhibitor. Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM) studies established the presence of active compounds and adsorption of leaf extracts on metal surface. The experimental data was statistically analyzed and regression equations for corrosion rate and inhibition efficiency generated. The optimum conditions were achieved at acid concentration of 1.00 mol, inhibitor concentration of 0.055 g/l temperature of 333K, and time of 2.750 hr. The optimization results revealed that inhibition efficiency of 82.93 % was obtained at optimum combination of the extract concentration, the acid concentration, the temperature and the immersion time. The inhibitive potentials of EO extract was found to impede the localized and uniform corrosion of mild steel in acidic media, showing that the Epiphyllum oxypetalum leaf extract is a good inhibitor for mild steel in acidic solutions.
Źródło:
World Scientific News; 2020, 145; 256-273
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Clarification of Pharmaceutical Wastewater with Moringa Oleifera: Optimization Through Response Surface Methodology
Autorzy:
Eri, I. R.
Hadi, W.
Slamet, A.
Powiązania:
https://bibliotekanauki.pl/articles/123396.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
flocculant
Moringa oleifera
response surface methodology
Opis:
Herbal pharmaceutical industrial wastewater contains a high amount of suspended solids and alkaline (pH > 8); therefore it requires approprite coagulant and flocculant compounds for its wastewater treatment. The most widely used flocculant is a synthetic that has certain problems such as non-biodegradability and releases of toxic residual monomers. The use of eco-friendly flocculants as alternative materials for conventional flocculant in water and wastewater treatments is increasing. Numerous factors influence the performance of coagulation-flocculation process, such as coagulant dosage, flocculant dosage, initial potential of hydrogen (pH) and velocity gradient of coagulation-flocculation. The main aim of this research is to evaluate the capability and effectiveness of Moringa oleifera extract for removal of suspended solid in herbal pharmaceutical industry. A coagulation-flocculation test was done by performing jar test at various speeds, according to the variation of the conducted treatment research. In this study, response surface methodology (RSM) approach was used to optimize the concentration of coagulant dosage, flocculant dosage and flocculation velocity gradient (G), and the results were measured as maximum percentage of suspended solid removal. The wastewater used in this research originally came from the inlet of herbal pharmaceutical industry wastewater treatment plant, which was collected over 3 days. The wastewater has a total suspended solids of more than 1250 mg/L, and was alkaline (pH 9–10). The moringa extract was made from the extraction of a fat free moringa powder with a salt solution in a certain ratio. The percentage removal of suspended solid was 93.42–99.54%. The final results of the analysis of response surface showed that the variables of flocculant dosage and the flocculation velocity gradient (G) have a huge impact on the amount of suspended solid removal, compared with the coagulant dosage. The model generated from the response analysis is a quadratic model. The optimum point of the removal suspended solid quadratic model is at 10.6566 mg/L alum dosage, 13.8185 ml/L Moringa oleifera extract dosage, and G velocity of flocculation 84.845 sec-1.
Źródło:
Journal of Ecological Engineering; 2018, 19, 3; 126-134
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Classification techniques and parameter optimization of Cyclone Continuous Centrifugal Separator for hematite ore
Autorzy:
Zhang, Pei
Xie, Haiyun
Jin, Yanling
Chen, Jialing
Zeng, Peng
Li, Yuanhong
Chen, Luzheng
Liu, Dianwen
Powiązania:
https://bibliotekanauki.pl/articles/2200335.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hematite
Cyclonic Continuous Centrifugal Separator
CCCS
classification
Response Surface Methodology
Opis:
The Cyclonic Continuous Centrifugal Separator (CCCS) is a new type of separation equipment developed based on cyclonic continuous centrifugal separation technology and combined with the separation principle of the fluidized bed. Taking hematite as the research object, the main parameters and conditions of the best hematite classification were determined through the classification test by using CCCS. Based on the classification test, the significance order of each process parameter and their interaction with hematite classification efficiency of the underflow products was analyzed with the Response Surface Methodology, the optimal process parameter of hematite classification was obtained and a multiple regression equation was established. The optimized process conditions were as follows, feeding pressure 55.48 kPa, backwash pressure 9.79 kPa, and underflow pressure 31.94 kPa. Under these conditions, the average hematite ore classification efficiency of coarse fraction (-2~+0.15mm), medium fraction (-0.15~+0.074mm) and fine fraction (-0.074mm) were 85.08%, 65.10% and 51.41%, respectively, and the relative errors with the predicted values were 1.6%, 4.0% and 2.5%, respectively. The results showed that the analytical model has good predictive performance. This research provides a certain prospect for the application of Cyclonic Continuous Centrifugal Separation to hematite ore classification. it provides a reference for the application of the Response Surface Methodology in the classification of hematite by Cyclonic Continuous Centrifugal Separation.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 1; art. no. 158864
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative studies on the production of statins using different microbial strains
Autorzy:
Syed, M.B.
Powiązania:
https://bibliotekanauki.pl/articles/80848.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lovastatin
mevastatin
statin
solid state fermentation
Aspergillus terreus
Penicillium citrinum
Penicillium brevicompactum
response surface methodology
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2019, 100, 3
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Designing Cement Mortars Modified with Cork and Rubber Waste Using Theory of the Experiment
Autorzy:
Dębska, Bernardeta
Krasoń, Joanna
Lichołai, Lech
Powiązania:
https://bibliotekanauki.pl/articles/124330.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
rubber waste
cork waste
cement mortars
Design of Experiments
DoE
Response Surface Methodology
RSM
Opis:
The article concerns the possibility of obtaining modified cement mortars and assessing their selected properties, i.e. bending and compressive strength, volume density of hardened mortars and water absorption. The modification consisted in a partial (0–50% vol.) substitution of sand by waste, crushed rubber, and cork. In the mortar design process, the theory of the experiment was used. The central composite design used available in the Statistica software package was response surface. This approach allowed to significantly reduce the number of experiments, reduce costs, and at the same time keep the maximum information about the mortars tested. The conducted research showed that waste materials can be an alternative to natural aggregates in the process of obtaining light mortars.
Źródło:
Journal of Ecological Engineering; 2019, 20, 9; 121-130
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies