Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "PD" wg kryterium: Temat


Tytuł:
A new method for on-line monitoring of bushings, transients and PD of power transformers
Nowe metody monitoringu on-line przepustów, przepięć i wyładowań niezupełnych transformatorów energetycznych
Autorzy:
Koch, M.
Kołtunowicz, W.
Krüger, M.
Powiązania:
https://bibliotekanauki.pl/articles/156993.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
power transformers
bushings
on-line monitoring
dissipation factor
capacitance
PD
UHF
transformator energetyczny
przepust
monitoring on-line
współczynnik strat
pojemność
WNZ
Opis:
This paper describes a new on-line method for capacitance and dissipation factor measurements of high voltage bushings, for recording grid transients and for partial discharge monitoring at power transformers. The needed accuracy for reliable detection of failures is in the range of 5 pF for capacitance and 0.1 % for dissipation factor. To overcome these shortcomings, this paper introduces an absolute method for measuring capacitance and dissipation factor of HV bushings. As for off-line measurements, the discrimination between noise and true internal discharges is the key for successful diagnosis. Strategies for sensitive partial discharge measurements under disturbed on-line conditions are described, also involving measurements in the UHF range.
Artykuł opisuje nowe metody pomiaru on-line pojemności i współczynnika strat przepustów wysokonapięciowych na potrzeby, monitorowania przepięć w sieci i wyładowań niezupełnych w transformatorach energetycznych. Według statystyk awaryjności przepusty WN są jedną z głównych przyczyn awarii transformatorów, co motywuje operatorów do ciągłego monitoringu on-line stanu układów izolacyjnych. Na potrzeby wiarygodnej diagnostyki wymagana jest dokładność pomiaru pojemności rzędu 5 pF i współczynnika strat rzędu 0,1%. Aby uzyskać taką rozdzielczość, wskutek braku symetrii w sieci, nie wystarczy względne porównanie prądów mierzonych w zaciskach pomiarowych w przepustach trzech faz. Dodatkowo, ten sposób pomiaru nie pozwala identyfikować procesu starzenia przebiegającego w trzech fazach ze zbliżonym tempem. W artykule przedstawiono metodę pomiaru rzeczywistych wartości pojemności i współczynnika strat przepustów WN. Pozwala ona uzyskać dokładność podobną do pomiarów off-line nawet w warunkach eksploatacyjnych. Wyładowania niezupełne są wczesnym wskaźnikiem zbliżającego się przebicia w izolacji WN. Ich pomiar na zacisku przepustu WN umożliwia wykrycie defektów w izolacji przepustu oraz transformatora. Podobnie jak w pomiarach off-line, rozróżnienie zakłóceń od rzeczywistych wyładowań wewnętrz izolacji jest kluczem do poprawnej diagnostyki. Opisano strategie czułego pomiaru wyładowań niezupełnych w warunkach on-line, z uwzględnieniem zakresu UHF.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 2, 2; 120-124
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adaptive fuzzy-sliding mode controller for trajectory tracking control of quad-rotor
Autorzy:
Simoud, Lahcen
Kadri, Boufeldja
Bousserhane, Ismail Khalil
Powiązania:
https://bibliotekanauki.pl/articles/384825.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
quadrotor UAV
sliding mode control
adaptive PD-Slidng mode controller
fuzzy PD-sliding mode
Opis:
This paper deals with the design of an adaptive-fuzzy-PD-Sliding mode controller to achieve stabilization of a quadrotor aircraft in the presence of wind disturbance. Firstly, the dynamic system modeling is carried out using Euler-Lagrange formalism. Then, an adaptive PD-sliding mode control system with an integral-operation switching surface is investigated for quadrotor desired trajectory tracking. Finally, an adaptive fuzzy-PD-sliding mode controller is proposed to achieve control objectives and system stabilization where the fuzzy logic system used to dynamically control parameters settings of the PD-sliding mode equivalent control law. Effectiveness and robustness of the proposed control scheme is verified through simulation results taking into account external disturbances. The simulation results of a quadrotor aircraft control with the proposed controller demonstrate the high performance during flight such as null tracking error and robustness in the presence of external disturbances.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2020, 14, 2; 15-24
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aktywny czujnik antenowy RTD
Active antenna detector RTD
Autorzy:
Paduch, P.
Powiązania:
https://bibliotekanauki.pl/articles/1367488.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
analizator
diagnostyka
wyładowania niezupełne (wnz)
analyzer
diagnostics
partial discharge (PD)
Opis:
The correct detection of partial discharge in a partial discharge analyser requires an appropriate level of pulse amplitude. Thermoresistors PT100 which form part of so called antenna detectors are often used as the source of the measuring signal. The output signal amplitude of such detectors ranges between several to several dozen millivolts. However, the pulse signal amplitude obtained from such a detector is not always sufficient to take a measure using instruments with typical measuring ranges. An antenna detector with an amplifier may be a solution to this problem. This article presents the construction of a passive detector, as well as an active detector developed on that basis. Examples of signals obtained using both types of detector are demonstrated.
Do poprawnej detekcji wyładowań niezupełnych w analizatorze wnz wymagany jest odpowiedni poziom amplitudy impulsów. Jako źródło sygnału pomiarowego wykorzystuje się często termorezystory typu PT100 wchodzące w skład tzw. czujników antenowych (anteny). Amplituda sygnału wyjściowego takich czujników waha się w granicach od kilkunastu do kilkudziesięciu miliwoltów. Nie zawsze jednak amplituda impulsów sygnału uzyskiwanego z takiego czujnika jest wystarczająca do wykonania pomiaru przyrządami o typowych zakresach pomiarowych. Rozwiązaniem tego problemu może być czujnik antenowy ze wzmacniaczem. W artykule przedstawiono typową budowę czujnika pasywnego i opracowanego na jego podstawie czujnika aktywnego. Pokazano przykładowe sygnały uzyskiwane z obu typów czujników.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2016, 3, 111; 21-24
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza stabilności układu oscylacyjnego z regulatorem PD niecałkowitego rzędu
Stability analysis of oscillatory system with PD controller of fractional order
Autorzy:
Busłowicz, M.
Juchimowicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/276782.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
układ niecałkowitego rzędu
oscylator
stabilność
regulator PD
fractional system
oscillator
stability
PD controller
Opis:
Rozpatrzono problem stabilności ciągłych liniowych układów regulacji automatycznej złożonych z członu oscylacyjnego i szeregowego regulatora PD niecałkowitego rzędu. Podano metody badania stabilności takich układów oraz wyznaczania obszaru stabilności na płaszczyźnie parametrów regulatora. Rozważania zilustrowano przykładami liczbowymi.
The problem of stability of linear continuous–time control system consisting of oscillatory plant and fractional order PD controller is considered. Methods for stability investigation is such systems and determination of stability region in the plane of controller parameters are given. The considerations are illustrated by numerical examples.
Źródło:
Pomiary Automatyka Robotyka; 2012, 16, 2; 293-297
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Annealing time effects on the surface morphology of C–Pd films prepared on silicon covered with SiO2
Autorzy:
Kozlowski, M.
Radomska, J.
Wronka, H.
Czerwosz, E.
Firek, P.
Sobczak, K.
Dluzewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/949412.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Pd
carbon
film
SEM
TEM
Opis:
Morphology changes of C–Pd films prepared in physical vapor deposition (PVD) process and next annealed in a temperature of 650 °C during different time were studied. These studies were performed with electron microscopy methods (scanning SEM and transmission TEM). It was found that not annealed films are flat and they are composed of grains with composite character and size of 100–200 nm. Pd nanocrystallite of a diameter of a few nanometers in some carbon matrix was placed in these grains. For annealed films, a formation of palladium nanograins with different sizes and shapes as well as a porous carbon matrix were observed. High resolution TEM investigation was used to determine a structure of all these grains. An increase in duration time of annealing process led to diminishing of the porosity of carbon matrix and a number of Pd grains situated on the film surface. It was also stated that covering of Si with SiO2 layer prevents formation of palladium silicide.
Źródło:
Optica Applicata; 2013, 43, 1; 81-89
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antioxidative assessment of new trans-palladium (II) complexes in head and neck cancer
Autorzy:
Malinowska, Katarzyna
Kaczmarczyk, Dariusz
Zajdel, Radosław
Merecz-Sadowska, Anna
Olszewski, Jurek
Majczyk, Małgorzata
Nowak-Zduńczyk, Alicja
Zielińska-Bliźniewska, Hanna
Powiązania:
https://bibliotekanauki.pl/articles/1397298.pdf
Data publikacji:
2020
Wydawca:
Index Copernicus International
Tematy:
antioxidant enzymes
head and neck cancer
oxidative stress
Pd (II) complexes
reactive oxygen species
Opis:
Background: Head and neck neoplasms stand for 6% of all malignant neoplasms worldwide. Chemotherapy has limited use due to the biological properties of the tumor (in the majority of cases moderately and poorly differentiated squamous cell carcinoma). The fundamental molecule used in treatment is cisplatin and its derivates, that can be associated with fluorouracil. The new chemotherapeutic agents are not in common use during the treatment of head and neck malignancies. However, the use of low molecular weight complexes Pd (II) carries the potential of being more effective in therapy. Material and Methods: Fifty-one patients, 30 men and 21 women (aged 52.9 ± 12.1 years) with head and neck cancer were included in the study. Fifty-one healthy subjects, 31 men and 20 women, (aged 54.1 ± 14.7 years) years formed the control group. Antioxidant enzymes, superoxide dismutase, and catalase activities in erythrocytes were examined. Results: An increased level of antioxidant enzymes was seen in the blood samples from patients with head and neck cancer after incubation with Pd (II) complex. In the group we obtained a statistically significant result p = <0.001. Discussion: That project may contribute to the development of new, more efficient head and neck cancer treatment strategies. In our opinion, the results can be used in the future to develop a valuable prognostic marker of the disease. This is important because the initial phase of cancer is asymptomatic. The search for factors involved in pathogenesis translates into economic benefits and makes therapy more effectiveness through the reduction of treatment expenses.
Źródło:
Polish Journal of Otolaryngology; 2020, 74, 1; 23-28
0030-6657
2300-8423
Pojawia się w:
Polish Journal of Otolaryngology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of descriptor approaches in design of PD observer-based actuator fault estimation
Autorzy:
Filasova, A.
Krokavec, D.
Serbak, V.
Powiązania:
https://bibliotekanauki.pl/articles/229212.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PD observers
actuator fault estimation
descriptor system observation
convex optimization
linear matrix inequalities
Opis:
Stability analysis and design for continuous-time proportional plus derivative state observers is presented in the paper with the goal to establish the system state and actuator fault estimation. Design problem accounts a descriptor principle formulation for non-descriptor systems, guaranteing asymptotic convergence both the state observer error as fault estimate error. Presented in the sense of the second Lyapunov method, an associated structure of linear matrix inequalities is outlined to possess parameter existence of the proposed estimator structure. The obtained design conditions are verified by simulation using a numerical illustrative example.
Źródło:
Archives of Control Sciences; 2015, 25, 1; 51-64
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of fractional calculus in iterative sliding mode synchronization control
Autorzy:
Zhang, Xin
Wen-Ru, Lu
Zhang, Liang
Xu, Wen-Bo
Powiązania:
https://bibliotekanauki.pl/articles/141629.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cross-coupling control
fractional calculus
iterative learning control
PD control
robot arm
sliding mode control
Opis:
In order to control joints of manipulators with high precision, a position tracking control strategy combining fractional calculus with iterative learning control and sliding mode control is proposed for the control of a single joint of manipulators. Considering the coupling between joints of manipulators, a fractional-order iterative sliding mode crosscoupling control strategy is proposed and the theoretical proof of its progressive stability is given. The paper takes a two-joint manipulator as the research object to verify the control strategy of a single-joint manipulator. The results show that the control strategy proposed in this paper makes the two-joint mechanical arm chatter less and the tracking more accurate. The synchronous control of the manipulator is verified by a three-joint manipulator. The results show that the angular displacement adjustment times of the threejoint manipulator are 0.11 s, 0.31 s and 0.24 s, respectively. 3.25 s > 5 s, 3.15 s of a PD cross-coupling control strategy; 2.85 s, 2.32 s, 4.22 s of a PD iterative cross-coupling control strategy; 0.14 s, 0.33 s, 0.28 s of a fractional-order sliding mode cross-coupling control strategy. The root mean square error of the position error of the designed control strategy is 6.47 × 10−6 rad, 3.69 × 10−4 rad, 6.91 × 10−3 rad, respectively. The root mean square error of the synchronization error is 3.96×10−4 rad, 1.36×10−3 rad, 7.81×10−3 rad, superior to the other three control strategies. The results illustrate the effectiveness of the proposed control method.
Źródło:
Archives of Electrical Engineering; 2020, 69, 3; 499-519
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of UV camera for PD detection on long rod HV insulator
Autorzy:
Urbaniec, I.
Frącz, P.
Powiązania:
https://bibliotekanauki.pl/articles/114242.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
surface partial discharges
PD measurements
optical method
HV insulator diagnosis
Opis:
The aim of the research works, results of which are presented in this paper, was to determine the feasibility and to indicate the application scope of optical method in the diagnosis of high-voltage (HV) long rod insulators. Diagnosis of technical condition of HV insulators is critical, because the insulation system undergoes aging processes, which cause deterioration of the insulating properties. The measurements were performed during test under laboratory conditions using an UV camera. Corona partial discharges occurring on the long rod insulator were registered, while the supply voltage value was increased. The presented analyses consider dependencies of the supply voltage value on the count number of UV photons emitted by partial discharges occurring in long rod insulator made of porcelain.
Źródło:
Measurement Automation Monitoring; 2015, 61, 3; 64-67
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Backtesting analysis. How to assess the quality of PD models in a retail banking
Analiza backtesting. Jak ocenić jakość modeli PD w bankowości detalicznej
Autorzy:
Siarka, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/580550.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
backtesting
model validation
probability of default
ryzyko kredytowe
prawdopodobieństwo niewypłacalności
PD
Opis:
The paper refers to the probability of default model validation procedure in retail banking. The author presents the idea of backtesting analysis focusing on sensitivity analysis of capital requirements under stress scenarios. The paper addresses statistical methods which can be applied in credit risk management under the backtesting exercise in retail banking. The advantages and drawbacks of specific approaches are discussed. Furthermore, the outcomes of the empirical implementation of selected methods are presented. The author considers the impact of positive asset correlation on various validation approaches, where no correlation is assumed, and proves that the zero-correlation assumptions may result in a more prudent approach. This finding was confirmed by the empirical analysis performed for retail portfolios. The research concerned PD parameters calculated for car and mortgage loans. The backtesting results revealed that PD forecasts created for mortgage portfolios underestimated credit risk during the crisis period which started in 2008. However, car loan portfolio credit risk predictions appeared to be robust.
W niniejszym artykule odniesiono się do zagadnienia weryfikacji jakości modeli służących do szacowania prawdopodobieństwa niewypłacalności w bankowości detalicznej. Autor przedstawił koncepcję analizy backtesting w świetle wrażliwości wymogów kapitałowych w odniesieniu do testowania warunków skrajnych. W artykule odniesiono się do zagadnienia weryfikacji jakości prognoz modeli służących do szacowania prawdopodobieństwa niewypłacalności. Przedstawiono i omówiono wyniki wybranych metod. Autor omówił również wpływ dodatniej korelacji aktywów na uzyskane wyniki. Wykazał, że założenie zerowej korelacji może skutkować bardziej konserwatywnymi wynikami. Ustalenie to potwierdzono przez analizę empiryczną przeprowadzoną dla portfeli detalicznych. Badanie dotyczyło parametrów PD szacowanych dla portfeli kredytów samochodowych oraz hipotecznych. Otrzymane wyniki wykazały, że prognozy PD opracowane dla portfela kredytów hipotecznych niedoszacowują ryzyko kredytowe. Prognozy ryzyka kredytowego dla portfela kredytów samochodowych okazały się trafne.
Źródło:
Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu; 2019, 63, 8; 230-244
1899-3192
Pojawia się w:
Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioconversion of crude glycerol to 1,3-Propanediol by immobilized cells of Citrobacter freundii
Autorzy:
Kowalska, Urszula
Mizielińska, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1179223.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
1
3-PD
Citrobacter freundii
bioconversion
crude glycerol
immobilization
keramsite
Opis:
1,3-Propanediol (1,3-PD) was produced from crude glycerol through the fermentation by immobilized Citrobacter freundii cells. Microorganisms were immobilized on keramsite. and transferred to fermentation broth “M” with 50g/L glycerol. In parallel, conversion of glycerol was led in two bioreactors: column bioreactor for continuous production and standard bioreactor for static culture at the same conditions. The obtained results have shown that the use of immobilized cells of C. freundii reduced concentration of crude glycerol about 60%. The results have also demonstrated that immobilization was appropriate process for production of 1,3-PD in both continuous and static (bioreactor) conditions.
Źródło:
World Scientific News; 2017, 80; 18-28
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Brazing of selected heat-resisting alloys using Ni-Pd filler metal
Lutowanie twarde wybranych stopów żaroodpornych z zastosowaniem lutu Ni-Pd
Autorzy:
Baranowski, Michał
Senkara, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/115053.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
lutowanie próżniowe
lutowanie twarde
lut Ni-Pd
stop żaroodporny
struktura
złącze
vacuum brazing
Ni-Pd filler metal
heat-resisting alloy
structure
joint
Opis:
Pd is a component of some advanced nickel filler metals designed for brazing heat-resisting alloys in order to improve their wettability and to enhance both corrosion resistance and plasticity of the joints. The joints of Inconel 625, Inconel 718, Hastelloy X, and 410 martensitic stainless steel were prepared by vacuum brazing with NiPd36Cr10BSi filler alloy. Complex structures of the joints were tested. It was revealed the displacement of interfaces from their initial positions in the course of brazing along with active action of Cr, Mo and Nb (for Inconel 718 alloy) in the formation of interstitial layers.
Pallad jest głównym składnikiem niektórych zaawansowanych lutów niklowych, przeznaczonych do lutowania twardego stopów żaroodpornych w celu poprawy ich zwilżalności oraz zwiększenia zarówno odporności na korozję jak i plastyczności połączeń. Wykonane zostały złącza stopów Inconel 625, Inconel 718, Hastelloy X i martenzytycznej stali nierdzewnej 410 metodą lutowania próżniowego stopem NiPd36Cr10BSi. Badano złożone struktury połączeń, ujawniając przesunięcie granic międzyfazowych z ich początkowych pozycji w trakcie lutowania oraz aktywne oddziaływanie Cr, Mo oraz Nb (dla stopu Inconel 718) podczas tworzenia się warstw przejściowych.
Źródło:
Welding Technology Review; 2019, 91, 10; 51-58
0033-2364
2449-7959
Pojawia się w:
Welding Technology Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalytic performances of cross-linking humic acids supported Pd/Ni bimetallic catalyst for heck reaction
Autorzy:
Xu, Q.
Zhang, L.
Shi, W.
Cui, Y.
Powiązania:
https://bibliotekanauki.pl/articles/778727.pdf
Data publikacji:
2009
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
kwas humusowy
epichlorohydryna
katalizator bimetaliczny Pd/Ni
katalizator nośnikowy
reakcja Hecka
cross-linking humic acid
epichlorohydrin
Pd/Ni bimetallic catalyst
supported catalyst
Heck reaction
Opis:
The cross-linking humic acids (CL-HAs), epichlorohydrin as the cross-linking reagent and the supported Pd/Ni bimetallic catalysts (CL-HAs-Pd/Ni) were prepared and characterized by IR, AAS, XPS, TEM. The effects of reaction time, temperature, base, solvent and the amount of catalyst on the properties of the catalyst were studied. These catalysts could catalyze the Heck reaction of aryl halides and substituted aryl halides with acrylic acids or styrene successfully; the yields were all above 95%.
Źródło:
Polish Journal of Chemical Technology; 2009, 11, 3; 22-26
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of surface type partial discharges using electrical, acoustic emission and UHF methods
Autorzy:
Kunicki, M.
Cichoń, A.
Powiązania:
https://bibliotekanauki.pl/articles/114691.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
partial discharges
PD measurements
UHF method
AE method
IEC60270
transformer fault diagnosis
Opis:
This paper presents research results related to measurements of partial discharges (PD), which may occur in oil insulation systems of electric power transformers. Three measuring methods were considered: electrical (apparent charge - IEC60270), acoustic emission (AE) and ultra-high frequency (UHF) method. Research works have been proceeded under laboratory condition. PD were generated using special apparatus and spark gap configuration for surface PD modeling. Measurements were performed simultaneously for each of the regarded methods and were repeated for selected supply voltage levels. The electrical and UHF methods measurements were made using MPD measuring system from Omicron. The AE method measurements were made using a piezoelectric transducer, which was installed on the outer transformer tank wall. Comparative analysis of signals gathered during research works was made. Possibilities of application of the three considered PD detection methods for electric power systems with oil insulation were proposed in the paper.
Źródło:
Measurement Automation Monitoring; 2015, 61, 1; 12-15
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of a Perpetual and PD Inventory Control System with Smith Predictor and Different Shipping Delays Using Bicriterial Optimization and SPEA2
Analiza porównawcza systemu sterowania ciągłego oraz z regulatorem PD i predyktorem Smitha dla różnych opóźnień dostaw z zastosowaniem metod optymalizacji dwukryterialnej i SPEA2
Autorzy:
Chołodowicz, E.
Orłowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/275128.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
inventory control systems
optimization
perpetual inventory system
multi-objective optimization
SPEA2
PD control
Smith predictor
inventory
systemy zarządzania zapasami
optymalizacja
optymalizacja wielokryterialna
system sterowania
predyktor Smitha
Opis:
Inventory optimization is critical in inventory control systems. The complexity of real-world inventory systems results in a challenging optimization problem, too complicated to solve by conventional mathematical programing methods. The aim of this work is to confront: a perpetual inventory system found in the literature and inventory system with PD control and Smith predictor proposed by the authors. To be precise, the two control systems for inventory management are analyzed with different shipping delays and compared. With regard to complexity of the proposed control system, we use a SPEA2 algorithm to solve optimization task for assumed scenario of the market demand. The objective is to minimize the inventory holding cost while avoiding shortages. A discrete-time, dynamic model of inventory system is assumed for the analysis. In order to compare the results of systems, Pareto fronts and signal responses are generated.
W pracy przyjęto dyskretny, stacjonarny, dynamiczny model systemu magazynowego ze stałym w czasie opóźnieniem dostaw. Głównym celem jest przeprowadzenie analizy porównawczej dwóch systemów automatycznego sterowania zamówieniami: ciągłego systemu sterowania magazynem z adaptacyjnym poziomem zamówienia (ang. Perpetual Inventory System with adaptive order level) oraz systemu sterowania magazynem z regulatorem proporcjonalno-różniczkującym oraz predyktorem Smitha z adaptacyjnym poziomem referencyjnym zapasów dla trzech różnych opóźnień dostaw. Optymalne nastawy układów regulacji zostały dobrane za pomocą algorytmu ewolucyjnego dla problemów optymalizacji wielokryterialnej: SPEA2 (ang. Strength Pareto Evolutionary Approach). W symulacji uwzględniono dwa kryteria minimalizacji: koszt utrzymania zapasów (ang. Holding Cost) oraz koszt niedoboru zapasu (ang. Shortage Cost). Wyniki badań symulacyjnych zaprezentowano za pomocą wykresów oraz tabel w środowisku MATLAB/Simulink.
Źródło:
Pomiary Automatyka Robotyka; 2016, 20, 3; 5-12
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies