Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Experimental design" wg kryterium: Temat


Tytuł:
Assessment of Wood Utility Pole Climbability Using Psychophysical and Mechanical Measurements
Autorzy:
Beauchamp, Y.
Thomas, M.
Arteau, J.
Marchand, D.
Powiązania:
https://bibliotekanauki.pl/articles/90574.pdf
Data publikacji:
1999
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
experimental design
psychophysical measurements
wood pole hardness
pole climbability
projekt eksperymentalny
pomiary psychofizyczne
Opis:
The issue of climbability has been raised on several occasions for more than a decade in North America. Presently, climbability is estimated from the pole hardness measured by the Pilodyn measurements (6 J). However, the use of Pilodyn measurements to discriminate the pole hardness value is criticized by climbers, who claim that the Pilodyn hardness measurement is affected by species-treatment combinations and that it does not reflect gaff penetration or climbability. Furthermore, climbability evaluations have been conducted in which test poles were climbed by linemen, and corresponding subjective ratings were recorded. However, the ability of psychophysical measurements to accurately discriminate close hardness pole values and to differentiate species-treatment combinations at specific hardness levels have not yet been fully documented. The aim of this study is to evaluate the psychophysical perception of linemen and the mechanical measurements of gaff penetration and gaff impact during the climbing of different wood species and treatment combinations in order to compare these results with Pilodyn measurements within a precise range of pole hardnesses, to study the relationships between these variables, and, finally, to propose various design guidelines for the development of a better tool for the evaluation of climbability.
Źródło:
International Journal of Occupational Safety and Ergonomics; 1999, 5, 1; 3-28
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal Selection of Measurement Locations for Parameter Estimation in Distributed Processes
Autorzy:
Uciński, D.
Powiązania:
https://bibliotekanauki.pl/articles/911191.pdf
Data publikacji:
2000
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
czujnik lokacyjny
rozproszony system komputerowy
estymacja parametryczna
sensor location
distributed-parameter systems
parameter estimation
optimum experimental design
spatial statistics
Opis:
The problem of locating pointwise sensor measurements so as to optimally estimate unknown parameters in a class of distributed systems is studied. Based on a scalar measure of performance defined on the corresponding Fisher information matrix, two approaches are developed for this problem: introduction of continuous designs, which allows for adaptation of well-known sequential algorithms of classical optimum experimental design, and application of standard non-linear programming techniques. In each case, particular algorithms are delineated and analysis of the appropriate sensor placements is made. The relative advantages and shortcomings of both the approaches are discussed and demonstrated by applying them to a two-dimensional diffusion process.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2000, 10, 2; 357-379
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Configuring a sensor network for fault detection in distributed parameter systems
Autorzy:
Patan, M.
Uciński, D.
Powiązania:
https://bibliotekanauki.pl/articles/929887.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
metoda podziału i ograniczeń
ograniczony plan eksperymentu
układ o parametrach rozłożonych
detekcja uszkodzeń
estymacja parametryczna
rozmieszczanie czujników
branch-and-bound
constrained experimental design
distributed parameter system
fault detection
parameter estimation
sensor location
Opis:
The problem of fault detection in distributed parameter systems (DPSs) is formulated as that of maximizing the power of a parametric hypothesis test which checks whether or not system parameters have nominal values. A computational scheme is provided for the design of a network of observation locations in a spatial domain that are supposed to be used while detecting changes in the underlying parameters of a distributed parameter system. The setting considered relates to a situation where from among a finite set of potential sensor locations only a subset can be selected because of the cost constraints. As a suitable performance measure, the Ds-optimality criterion defined on the Fisher information matrix for the estimated parameters is applied. Then, the solution of a resulting combinatorial problem is determined based on the branch-and-bound method. As its essential part, a relaxed problem is discussed in which the sensor locations are given a priori and the aim is to determine the associated weights, which quantify the contributions of individual gauged sites. The concavity and differentiability properties of the criterion are established and a gradient projection algorithm is proposed to perform the search for the optimal solution. The delineated approach is illustrated by a numerical example on a sensor network design for a two-dimensional convective diffusion process.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2008, 18, 4; 513-524
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mobile sensor routing for parameter estimation of distributed systems using the parallel tunneling method
Autorzy:
Zięba, T.
Uciński, D.
Powiązania:
https://bibliotekanauki.pl/articles/907911.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
sieć sensorowa
układ o parametrach rozłożonych
projekt optymalny
obliczanie równoległe
sensor network
distributed parameter system
optimum experimental design
tunneling algorithm
parallel computing
Opis:
The paper deals with the problem of optimal path planning for a sensor network with mutliple mobile nodes, whose measurements are supposed to be primarily used to estimate unknown parameters of a system modelled by a partial differential equation. The adopted framework permits to consider two- or three-dimensional spatial domains and correlated observations. Since the aim is to maximize the accuracy of the estimates, a general functional defined on the relevant Fisher information matrix is used as the design criterion. Central to the approach is the parameterization of the sensor trajectories based on cubic B-splines. The resulting finite-dimensional global optimization problem is then solved using a parallel version of the tunneling algorithm. A numerical example is included to clearly demonstrate the idea presented in the paper.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2008, 18, 3; 307-318
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of central composite design for the optimization of photodestruction of a textile dye using UV/S2O82- process
Autorzy:
Khataee, A.R.
Powiązania:
https://bibliotekanauki.pl/articles/778871.pdf
Data publikacji:
2009
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
planowanie doświadczeń
metodologia powierzchni odpowiedzi
dekoloryzacja
experimental design
response surface methodology
decolorization
C. I. Basic Red 46
K2S2O8
Opis:
The photooxidative destruction of C. I. Basic Red 46 (BR46) by UV/S2O82- process is presented. Central Composite Design (CCD) was employed to optimize the effects of operational parameters on the photooxidative destruction efficiency. The variables investigated were the initial dye and S2O82- concentrations, reaction time and distance of the solution from UV lamp. The predicted values of the photodestruction efficiency were found to be in good agreement with the experimental values (R2 = 0.9810, Adjusted R2 = 0.9643). The results of the optimization predicted by the model showed that the maximum decolorization efficiency (>98%) was achieved at the optimum conditions of the reaction time 10 min, initial dye concentration 10 mg/l, initial peroxydisulfate concentration 1.5 mmol/l and distance of UV lamp from the solution 6 cm. The figure-of-merit electrical energy per order (EEo) was employed to estimate the electrical energy consumption and related treatment costs.
Źródło:
Polish Journal of Chemical Technology; 2009, 11, 4; 38-45
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Construction of experimental designs by combining some GD designs
Konstrukcja eksperymentalnych układów z wykorzystaniem pewnych układów GD
Autorzy:
Brzeskwiniewicz, H.
Krzyszkowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/9667.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Katedra Zastosowań Matematyki i Informatyki
Tematy:
experimental design
group divisible block design
balanced incomplete block design
split-plot design
Źródło:
Colloquium Biometricum; 2009, 39
1896-7701
Pojawia się w:
Colloquium Biometricum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania doświadczalne różnych sposobów smarowania wzdłużnych łożysk ślizgowych
Experimental study of different supply designs in hydrodynamic thrust bearings
Autorzy:
Rotta, G.
Wasilczuk, M.
Wodtke, M.
Powiązania:
https://bibliotekanauki.pl/articles/188887.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
smarowanie hydrodynamiczne
łożyska wzdłużne
systemy smarowania
badania doświadczalne
hydrodynamic lubrication
thrust bearings
supply design
experimental study
Opis:
Hydrodynamiczne łożyska wzdłużne charakteryzują się znacznymi stratami tarcia, które przyczyniają się do wzrostu temperatury łożyska i obniżenia jego nośności. Obecnie olej smarujący jest zazwyczaj chłodzony w zewnętrznych układach chłodzenia. Po schłodzeniu olej jest dostarczany z powrotem do korpusu łożyska, z reguły do przestrzeni między klockami łożyska. Skuteczność dostarczania schłodzonego oleju w pobliże wlotu do szczeliny smarowej ma wpływ na temperaturę łożyska i jego obciążalność. W pracy przedstawiono wyniki badań doświadczalnych trzech systemów dostarczania oleju na właściwości małego łożyska szybkoobrotowego.
Hydrodynamic thrust bearings have considerable power losses, and in modern designs lubricated oil is cooled in external systems. After the cooling, oil is pumped back to the bearing housing, most frequently to the space between pads. Effectiveness of supplying of cold oil to the vicinity of the inlet to the fluid film has a strong influence on bearing temperature and load capacity. In practice there is a lot of different supply methods used in thrust bearings, but there is a lack of descriptions of their efficiency in literature. In this paper some experimental results of influence of selected supplying methods on bearing characteristics have been presented.
Źródło:
Tribologia; 2010, 5; 213-221
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical properties of a control design of controls provided by supreme chamber of control
Autorzy:
Zieliński, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/453333.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
statistical quality control
alternative rating
experimental design
Opis:
In statistical quality control objects are alternatively rated. It is of interest to estimate a fraction of negatively rated objects. One of such applications is a quality control provided by Supreme Chamber of Control (NIK) to find out a percentage of abnormalities in the work among others of tax offices. Mathematical details of experimental designs for alternatively rated phenomena are given in Karliński (2003). There are given requirements for sample sizes, numbers of negative rates, accuracy of estimation and error risks. In the paper, some statistical properties of given plans are investigated.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2010, 11, 1; 158-166
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the optimal continuous experimental design problem
Autorzy:
Kitsos, Christos
Powiązania:
https://bibliotekanauki.pl/articles/729876.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Zielonogórski. Wydział Matematyki, Informatyki i Ekonometrii
Tematy:
nonlinear experimental design
static
sequential design
Opis:
The target of this paper is to provide a compact review of the Optimal Experimental Design, the continuous case. Therefore we are referring to the general nonlinear problem in comparison to the linear one.
Źródło:
Discussiones Mathematicae Probability and Statistics; 2011, 31, 1-2; 59-70
1509-9423
Pojawia się w:
Discussiones Mathematicae Probability and Statistics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal training strategies for locally recurrent neural networks
Autorzy:
Patan, K.
Patan, M.
Powiązania:
https://bibliotekanauki.pl/articles/1396735.pdf
Data publikacji:
2011
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
training schedule
neural network
Fisher information matrix
network parameters
optimal experimental design
convex optimization theory
Opis:
The problem of determining an optimal training schedule for locally recurrent neural network is discussed. Specifically, the proper choice of the most informative measurement data guaranteeing the reliable prediction of neural network response is considered. Based on a scalar measure of performance defined on the Fisher information matrix related to the network parameters, the problem was formulated in terms of optimal experimental design. Then, its solution can be readily achieved via adaptation of effective numerical algorithms based on the convex optimization theory. Finally, some illustrative experiments are provided to verify the presented approach.
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2011, 1, 2; 103-114
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical assistance to the decision for the choice of a physical configuration
Pomoc techniczna dla decyzji w wyborze fizycznej konfiguracji
Autorzy:
Benmoussa, R.
Powiązania:
https://bibliotekanauki.pl/articles/406202.pdf
Data publikacji:
2011
Wydawca:
Politechnika Częstochowska
Tematy:
reengineering procesów biznesowych
elastyczność
symulacja
projekt eksperymentalny
konfiguracja fizyczna
wspomaganie decyzji
BPR
business process reengineering
flexibility
simulation
experimental design
physical configuration
decision support
Opis:
In this paper a technique for decision support for selecting a physical configuration are presented. This technique is useful during the redesign of a proposed restructuring of production processes resulted in a BPR approach. Based on the use of simulation and from the traditional experimental designs. It involves assessing the ability of the said configuration to cope with external and internal changes it faced. Our evaluation process is essentially based on the criterion of flexibility, this perverse concept and the ability of the configuration to accommodate the possible future directions for the installation of one or more measures of progress. Our work is illustrated by a case study.
W artykule przedstawiono techniki wspomagania decyzji wyboru fizycznej konfiguracji. Przedstawiona technika jest przydatna w trakcie przebudowy planowanej restrukturyzacji procesów produkcyjnych co odzwierciedla podejście BPR, opierające się na korzystaniu z symulacji i tradycyjnych wzorów doświadczalnych. Technika polega ona ocenie zdolności tej konfiguracji do radzenia sobie z wewnętrznymi i zewnętrznymi zmianami. Proces oceny opiera się głównie na kryterium elastyczności, koncepcja ta jest przewrotna i daje możliwości konfiguracji w celu uwzględnienia możliwych przyszłych kierunków w zakresie instalacji jednego lub więcej środków postępu. Praca ilustruje studium przypadku.
Źródło:
Polish Journal of Management Studies; 2011, 3; 44-60
2081-7452
Pojawia się w:
Polish Journal of Management Studies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Virtual screening strategies in drug design – methods and applications
Autorzy:
Bielska, E.
Lucas, X.
Czerwoniec, A.
Kasprzak, J.M.
Kaminska, K.H.
Bujnicki, J.M.
Powiązania:
https://bibliotekanauki.pl/articles/80139.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
virtual screening
drug design method
application
drug discovery
similarity search
drug development
high-throughput screening
medical chemistry
chemical compound
experimental approach
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2011, 92, 3
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An application of the shortest confidence intervals for fraction in controls provided by Supreme Chamber of Control
Autorzy:
Zieliński, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/452911.pdf
Data publikacji:
2012
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
statistical quality control
alternative rating
experimental design
shortest confidence intervals for fraction
Opis:
In statistical quality control objects are alternatively rated. It is of interest to estimate a fraction of negatively rated objects. One of such applications is a quality control provided by Supreme Chamber of Control (NIK) to find out a percentage of abnormalities in the work among others of tax offices. Mathematical details of experimental designs for alternatively rated phenomena are given in Karliński (2003). Zieliński (2010b) investigated statistical properties of those experimental designs. In the paper, the application of the shortest confidence intervals for fraction in experimental designs is shown. Those intervals were proposed by Zieliński (2010a).
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2012, 13, 2; 134-138
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On optimality of the orthogonal block design
Autorzy:
Synówka-Bejenka, Ewa
Zontek, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/729896.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Wydział Matematyki, Informatyki i Ekonometrii
Tematy:
Experimental design
orthogonal block design
robust estimator
maximum likelihood estimator
A-optimality
D-optimality
Opis:
In the paper a usual block design with treatment effects fixed and block effects random is considered. To compare experimental design the asymptotic covariance matrix of a robust estimator proposed by Bednarski and Zontek (1996) for simultaneous estimation of shift and scale parameters is used. Asymptotically A- and D- optimal block designs in the class of designs with bounded block sizes are characterized.
Źródło:
Discussiones Mathematicae Probability and Statistics; 2012, 32, 1-2; 59-68
1509-9423
Pojawia się w:
Discussiones Mathematicae Probability and Statistics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Product design techniques in automotive production
Autorzy:
Dúbravčík, M.
Babjak, Š
Kender, Š.
Powiązania:
https://bibliotekanauki.pl/articles/117740.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
automotive
experimental car
innovation techniques integration
innovation tools
product design
prototyping
Opis:
In the present and medium term perspective in the future, the mechanical engineering and other industrial branches are facing advanced challenges arising from global changes in the technical, economic and social environment. Submitted article deals with the approach to Product design in automotive sector that is using benefits from the synergic effect of utilizing the innovative methods, techniques and tools, within the integrated model of complex product development. The suggested paradigm is demonstrated on the project of experimental car ICAR 2010 at the Faculty of Mechanical Engineering, Technical University of Kosice, Slovakia.
Źródło:
Applied Computer Science; 2012, 8, 1; 77-91
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies