Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "‘technological' method" wg kryterium: Temat


Wyświetlanie 1-27 z 27
Tytuł:
Określanie standardowych kosztów jednostkowych wybranych prac z zakresu hodowli lasu
Determination of standard unit costs of selected works from the silviculture
Autorzy:
Kocel, J.
Wysocka-Fijorek, E.
Powiązania:
https://bibliotekanauki.pl/articles/979003.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
hodowla lasu
prace hodowlane
odnowienia lasu
zalesianie
koszty jednostkowe
standaryzacja
leśnictwo
prace pielęgnacyjne
standard costs
silviculture
grouping method
‘technological' method
financial system of the state forests
Opis:
The article presents the standardization of costs of silviculture treatments (reforestation and afforestation, corrections and overplanting, forest tending) with the method of grouping forest districts with similar natural conditions and the ‘technological’ method. The standard costs were compared with the real costs, and the applied methods were assessed in terms of their suitability for the State Forests financial system. Source materials were obtained for 2017 from the databases of the State Forests Information System. The base for determination of the value of the average monthly gross remuneration by poviats for forest districts and regional directorates of the State Forests for 2017 was information obtained from the Local Data Bank of the Statistics Poland and announcements of the President of the Statistics Poland on average remuneration in the national economy. The standardization method of unit costs in silviculture based on groups of forest districts with similar natural conditions boiled down to determining 12 uniform groups of forest districts in terms of the structure of forest habitat types. The ‘technological’ method consisted in building technological models of works in silviculture using the labor−consumption catalogues in force in the State Forests. The relationship between the developed standard costs and the weighted average real costs was calculated using the Spearman correlation. It achieved lower values for all analyzed treatment groups compared to the dependencies related to cost standardization using the ‘technological’ method. Comparison of deviations of reforestation and afforestation as well as corrections and overplanting calculated by two methods with real costs determined in regional directorates of the State Forests using the Wilcoxon test allowed to indicate regional directorates, in which underestimation of standard costs concerned both analyzed methods occurred. Forest districts included in these directorates should be subjected to careful analysis. To standardize unit costs of reforestation and afforestation, as well as corrections and overplanting, it is proposed to use the method of determining standard unit costs on the basis of groups of forest districts with similar natural conditions. The ‘technological’ method should be used to standardize unit costs of forest tending. However, one should take into account the overestimation of standard costs in comparison with the actual unit costs of this group of activities, especially in forest districts with high competition on the forest services market.
Źródło:
Sylwan; 2020, 164, 03; 196-205
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological reliability of sewage treatment plant with the Pomiltek Mann type bioreactor
Autorzy:
Kurek, Karolina
Bugajski, Piotr
Operacz, Agnieszka
Młyński, Dariusz
Wałęga, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/292901.pdf
Data publikacji:
2020
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
pollution indicators
technological reliability
wastewater treatment plant
Weibull method
Opis:
The aim of the work was to determine the technological reliability of the selected pollution indicators removal BOD5, CODCr and total suspension from the sewage treatment plant working with the bioreactor Pomiltek Mann type. Wastewater treatment plant which is a subject of this study is located in Lesser Poland, in Siepraw commune. The analysis was performed using the Weibull method for basic indicators of impurities, BOD5, CODCr and total suspended solids. Physico-chemical analyses of raw and treated wastewater, were carried out in the period from 2003 to 2014 (11 years). The research period included measured values of pollutions indicators in 38 samples of raw and treated sewage. For each of pollution indicators descriptive statistic, percentage reduction (n) and treatment plant reliability factors (RF) were calculated. Average reduction for BOD5 and TSS was on level equal 94%, only for COD the average reduction was lower and was on level 89%. The reliability values determined by Weibull method, were: 75% (BOD5), 90% (CODCr) and 89.5% (TSS). The reliability results have been lower than the presented by literature source, which means that work of wastewater treatment plant in Siepraw was not satisfied in 11 years of research.
Źródło:
Journal of Water and Land Development; 2020, 46; 146-152
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of an inductive converter for measuring the thickness of anti-corrosion coatings in machines
Zastosowanie przetwornika indukcyjnego do pomiaru grobosci powlok antykorozyjnych maszyn
Autorzy:
Ptak, P.
Zloto, T.
Powiązania:
https://bibliotekanauki.pl/articles/793193.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
anticorrosion coating
inductive converter
measurement method
corrosion damage
non-destructive method
machine
technological condition
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination the dynamic parameters of the controlled technological processes of coal preparation by using the semi graphical method
Opredelenie dinamicheskikh parametrov kontroliruemykh tekhnologicheskikh processov obogashhenija uglja s pomoshhju grafoanaliticheskogo metoda
Autorzy:
Lehtsier, O.
Ulshin, V.
Kilymnik, O.
Pismenskiy, A.
Powiązania:
https://bibliotekanauki.pl/articles/793011.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
coal preparation
technological process
graphical method
analytical method
dynamic parameter
automated control system
transition function
algorithm
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Łączenie metod ilościowych i jakościowych na przykładzie regionalnego foresightu energetycznego
Combining quantitative and qualitative methods on the example of regional foresight related to energy industry
Autorzy:
Ropuszyńska-Surma, Edyta
Powiązania:
https://bibliotekanauki.pl/articles/425291.pdf
Data publikacji:
2014
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
Delphi method
technological substitution
logistic curve
Gompertz’s model
Lower
Silesia
strategy
Opis:
Regional and sectorial strategies should take into consideration, inter alia, stakeholders’ needs and potential problems in the future (e.g. lack of energy security). In this situation, there is often necessity to select key technologies for a region or a sector. The problem is what kind of methods are used to select needed technologies and to point out visions, which are linked to these technologies, of region or sector development. The issue is shown in this article basing on the project called ”Energy Development Strategy of Lower Silesia by Using Foresight Methods”. The paper presents the procedure of the selection of theses which are studied by Delphi methods. The results of this research addressed to selected theses are shown briefly. Also there is shown limited usage of technological foresight basing on S-shape curves (logistic curves and Gompert’s method). In connection to these functions there is presented a substitution between conventional technologies of electricity production and renewable energy sources technologies. The results of qualitative methods and Delphi method are compared. Basing on this, the limits of the implementation of qualitative methods as well as the necessity to compare the results of two methods: experts’ one and qualitative one are shown. In other words, the combining of methods is recommended during foresight research.
Źródło:
Econometrics. Ekonometria. Advances in Applied Data Analytics; 2014, 4(46); 135-150
1507-3866
Pojawia się w:
Econometrics. Ekonometria. Advances in Applied Data Analytics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The agricultural production in mathematical models
Autorzy:
Parlinska, M.
Dareev, G.
Powiązania:
https://bibliotekanauki.pl/articles/572910.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
agricultural production
mathematical model
agriculture
production function
analysis method
economic process
technological process
Opis:
The theoretical questions of mathematical modeling of agricultural production processes are described. Production of agricultural goods and foodstuffs is modeled except for the production of forage and involvement of equipment and techniques, buildings, infrastructure etc. The model is based on a division of economic and technological processes in agriculture into four stages specific for agribusiness. A mathematical description of four stages in used production functions is provided.
Źródło:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Problemy Rolnictwa Światowego; 2011, 11(26), 3
2081-6960
Pojawia się w:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Problemy Rolnictwa Światowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka okreslania wartosci technologicznej i jakosci konsumpcyjnej ziemniaka
Autorzy:
Tajner-Czopek, A
Powiązania:
https://bibliotekanauki.pl/articles/808016.pdf
Data publikacji:
2006
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
wartosc technologiczna
ziemniaki
jakosc konsumpcyjna
metody oznaczania
technological value
potato
consumption value
determination method
Opis:
Suitability of potatoes for different processing directions is depended on their technological value and for direct consumption - on consumption quality. Irrespective of the utilization direction (consumption, food and industrial processing) the potatoes should satisfy the basic requirements, (i.e. appearance, mineral impurity content, tuber size, ect.) and be characterized by proper chemical composition including adequate contents of dry matter, starch, reducing and total sugars, vitamin C, total protein content and possibly the lowest contents of antinutritive substances. Chemical composition of the potatoes may be analysed by using traditional as well as modern methods (used in special laboratories). Often and often also the potato processing plants are fitted with the modern measuring equipment which enables the use of exact and fast methods, and provides precise determination of the quality of raw potatoes and their final products.
O przydatności ziemniaków do zużytkowania w danym kierunku przetwarzania decyduje wartość technologiczna, natomiast o przydatności ziemniaków do bezpośredniej konsumpcji - jakość konsumpcyjna. Niezależnie od kierunku zużytkowania (konsumpcja, przetwórstwo spożywcze i przemysłowe) ziemniak powinien sprostać ogólnym wymaganiom, (tj. wygląd zewnętrzny, zawartość zanieczyszczeń mineralnych, wielkość bulw, itp.) oraz charakteryzować się odpowiednim składem chemicznym, np. zawartość suchej masy, skrobi, cukrów redukujących i ogółem, witaminy C, białka ogółem, niskiej zawartości substancji antyżywieniowych, itp. Analiza składu chemicznego ziemniaków może być przeprowadzona zarówno metodami tradycyjnymi jak i nowoczesnymi (stosowanymi w specjalistycznych laboratoriach). Coraz częściej także zakłady przetwórcze są wyposażone w nowoczesną aparaturę umożliwiającą zastosowanie metod dokładnych i szybkich, precyzyjnie określających jakość ziemniaków i wytworzonych z nich produktów.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 2006, 511, 1; 95-103
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Near-natural methods of forest regeneration
Autorzy:
Mauer, O
Powiązania:
https://bibliotekanauki.pl/articles/41324.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Norway spruce
Picea abies
artificial regeneration
plantation
mountain forest stand
forest regeneration
regeneration method
technological procedure
Opis:
The study examines the factors involved in the successful artificial regeneration of Norway spruce Picea abies (L.) Karst. by plantation or sowing in wood left behind in mountain forest stands. The issues studied are as follows: regeneration in stumps,trunks and disks (logs); regeneration in wood at various stages of decomposition; regeneration under the stand canopy and on clearings. The work brings a description of technological procedures to ensure success of this regeneration method.
Źródło:
Dendrobiology; 2004, 51 Supplement
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Graphic presentation of results of calculations by calculable complex 'Mirela plus'
Graficheskoe predstavlenie rezul'tatov raschetov v vychislitel'nom komplekse 'Mirela plus'
Autorzy:
Kozub, Y.
Kozub, G.
Powiązania:
https://bibliotekanauki.pl/articles/792430.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
graphic presentation
calculation
finite element method
Mirela plus complex
visualization
construction
technological process
computer aided design
Opis:
The analysis of visualization in the system of the automated planning of constructions is resulted in the article. The new going is offered near realization of algorithms of visualization of results of calculations within the framework of complex «MIRELA +».
Рас смотрен анализ процедур визуализации в системах автоматизированного проектирования. Предложен новый поход для реализации алгоритмов графического представления результатов расчета в рамках вычислительного комплекса «МІРЕЛА +».
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 3
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Setting of criteria in the innovativeness level assessment method of technological solutions
Dobór kryteriów w metodzie oceny poziomu innowacyjności rozwiązań technologicznych
Autorzy:
Belina, B.
Łopacińska, L.
Powiązania:
https://bibliotekanauki.pl/articles/256338.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
technological solution
innovativeness level assessment
assessment criteria
AHP method
rozwiązanie innowacyjne
ocena poziomu innowacyjności
kryteria oceny
metoda AHP
Opis:
The article presents the Analytic Hierarchy Process (AHP) method used for the development of the innovativeness level assessment method (PI) of technological solutions. The need for the development of such a method stemmed from the “Innovative Systems of Technical Support for Sustainable Development of Economy” strategic research programme. The AHP method helps to assign weights to the criteria of the innovativeness assessment level method. The AHP method is dedicated to support the decision making process and to facilitate the assessment with the use of multicriteria, especially in the case of qualitative criteria subjectively assessed by the experts. The developed the PI method significantly supports the process of knowledge transformation and the transfer of advanced technologies in the area of the development and the maintenance of machines and technical devices. The use of this assessment improves in the competitiveness of the economy.
W artykule zaprezentowano metodę hierarchicznej analizy problemu (Analytic Hierarchy Process – AHP) w zastosowaniu do opracowania metody oceny poziomu innowacyjności (PI) rozwiązań technologicznych, w tym opracowanych w ramach Programu Strategicznego pn. „Innowacyjne systemy wspomagania technicznego zrównoważonego rozwoju gospodarki” (w zakresie wyznaczania wag obszarów problemowych oraz poszczególnych kryteriów w ramach obszarów). Metoda AHP jest dedykowana głównie do wspomagania wyboru wariantów decyzyjnych, ale również do dokonywania oceny diagnostycznej lub porównawczej w ujęciu wielokryterialnym, szczególnie w przypadku występowania kryteriów jakościowych oraz subiektywnym charakterze dokonywanych przez ekspertów ocen. Opracowana metoda oceny poziomu innowacyjności (PI) stanowi istotny element wspomagania procesów transformacji wiedzy i transferu zaawansowanych technologii procesowych i produktowych w obszarze wytwarzania oraz eksploatacji maszyn i urządzeń technicznych. Wykorzystanie metody do oceny powstających rozwiązań przyczynia się do wzrostu konkurencyjności gospodarki poprzez zwiększenie efektywności i skuteczności procesu komercjalizacji innowacji.
Źródło:
Problemy Eksploatacji; 2013, 4; 103-112
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Setting of criteria in the commercial potential assessment method of innovative technological solutions
Dobór kryteriów w metodzie oceny potencjału komercyjnego rozwiązań innowacyjnych
Autorzy:
Belina, B.
Giesko, T.
Łopacińska, L.
Walasik, M.
Powiązania:
https://bibliotekanauki.pl/articles/257301.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
innovative technological solution
commercial potential assessment
assessment criteria
AHP method
rozwiązanie innowacyjne
ocena potencjału komercyjnego
kryteria oceny
metoda AHP
Opis:
The article presents the Analytic Hierarchy Process (AHP) method, used for the development of the commercial potential assessment method (PK) of innovative technological solutions. The need for the development of such a method was stemmed from the “Innovative Systems of Technical Support for Sustainable Development of Economy” strategic research programme. The AHP method helps to assign weights to the thematic assessment areas of the commercial potential method and the criteria within the areas. The AHP method is dedicated to supporting the decision making process and to facilitating the assessment with the use of multi-criteria, especially in the case of qualitative criteria subjectively assessed by the experts. The developed PK method significantly supports the process of knowledge transformation and transfer of advanced technologies in the area of the development and the maintenance of machines and technical devices. The use of this assessment improves the innovativeness and competitiveness of the economy by increasing of the efficiency and the effectiveness of the commercialisation process of innovative technological solutions.
W artykule zaprezentowano metodę hierarchicznej analizy problemu (Analytic Hierarchy Process – AHP) w zastosowaniu do opracowania metody oceny potencjału komercyjnego (PK) innowacyjnych rozwiązań technicznych, w tym opracowanych w ramach Programu Strategicznego pn. „Innowacyjne systemy wspomagania technicznego zrównoważonego rozwoju gospodarki” (w zakresie wyznaczania wag obszarów problemowych oraz poszczególnych kryteriów w ramach obszarów). Metoda AHP jest dedykowana głównie do wspomagania wyboru wariantów decyzyjnych, ale także do dokonywania oceny diagnostycznej lub porównawczej w ujęciu wielokryterialnym, szczególnie w przypadku występowania kryteriów jakościowych oraz subiektywnym charakterze dokonywanych przez ekspertów ocen. Opracowana metoda oceny potencjału komercyjnego (PK) stanowi istotny element wspomagania procesów transformacji wiedzy i transferu zaawansowanych technologii procesowych i produktowych w obszarze wytwarzania oraz eksploatacji maszyn i urządzeń technicznych. Wykorzystanie metody do oceny powstających rozwiązań przyczynia się do wzrostu innowacyjności i konkurencyjności gospodarki poprzez zwiększenie efektywności i skuteczności procesu komercjalizacji innowacyjnych.
Źródło:
Problemy Eksploatacji; 2013, 2; 221-234
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostics of the regional transport and logistic system’s functioning (in the case of Luhansk region)
Diagnostika funkcionirovanija regionalnojj transporto-logisticheskojj sistemy (na primere Luganskogo regiona)
Autorzy:
Kravchenko, A.
Medvediev, I.
Powiązania:
https://bibliotekanauki.pl/articles/792374.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
transport system
Lugansk Region
diagnostics
indicator
logistic system
algorithm
technique
regulatory indicator system
diagnostic method
technological development
technical development
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania postępu technologicznego w gospodarstwach rodzinnych
Investigations of technological progress on the family farms
Autorzy:
Wójcicki, Z.
Powiązania:
https://bibliotekanauki.pl/articles/239904.pdf
Data publikacji:
2007
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
gospodarstwo rodzinne
postęp technologiczny
badania terenowe
organizacja badań
metodyka
prognoza
family farm
technological progress
local surveys
organization
method
prognose
Opis:
Na tle dotychczasowych doświadczeń IBMER z zakresu badań techniczno-ekonomicznych działalności rozwojowych gospodarstw rodzinnych, uzasadniano potrzebę kontynuowania tego rodzaju badań według zaktualizowanej jednolitej metodyki zbierania i corocznego zestawiania wyników działalności wybranych obiektów terenowych. Przedstawiono główne założenia organizacyjne i metodyczne realizacji projektu badawczego MNiSzW pt. Postęp technologiczny w wybranych gospodarstwach rodzinnych - stan dotychczasowy i kierunki przemian.
Against the background of previous IBMER's practices dealing with surveying the technical-economic activities of developing family farms, an importance to continue the studies in this direction was proved. The studies ought to be based on an actualized uniform method of collecting and annual setting the effects of selected terrain objects' activities. Basic organization and methodical rules to realization of the MSHE (Ministry of Science and Higher Education) research project on "Technological progress on selected family farms - actual state and transformation directions", were presented.
Źródło:
Problemy Inżynierii Rolniczej; 2007, R. 15, nr 3, 3; 19-28
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Competitiveness of products, equipment and technological processes in machine-building
Konkurencyjność wyrobów i procesów technologicznych w budowie maszyn
Autorzy:
Shabaycovitch, V.
Powiązania:
https://bibliotekanauki.pl/articles/175835.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
konkurencyjność
jakość
wykresy SADT
wyrób
wyposażenie
proces technologiczny
budowa maszyn
competitiveness
quality
SADT-method
product
equipment
technological process
machine building
Opis:
In the times of crisis, the competitive edge of a desired production acquires a special value. The paper considers the structure of competitiveness as a unity of quality, expenditure, profit and prices. It describes a method of forming competitiveness exemplifying, at the same time, an erroneous interpretation of competitiveness and methods of its "rapid determination". To analyze and synthesize an integral level of competitiveness, one may use the SADT-method of detailed step-by-step hierarchy of the objects under study.
Konkurencyjność produkcji w okresie kryzysu nabywa znaczenia podstawowego. W pracy rozważano strukturę konkurencyjności określaną jakością wytworzonego wyrobu, wszystkich rodzajów kosztów oraz zysku. Opisano jedną z metod, umożliwiającą natychmiastową ocenę konkurencyjności procesów produkcji. Na podstawie ogólnej definicji konkurencyjności przedstawiono krytyczne uwagi dotyczące sposobu jej omawiania. Dla poprawy dokładności ustalania poziomu konkurencyjności zaproponowano zastosowanie wykresów SADT, umożliwiających wyznaczenie modelu hierarchicznego czynników mających wpływ na ocenę rozważanego procesu produkcji.
Źródło:
Advances in Manufacturing Science and Technology; 2012, 36, 1; 73-80
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An empirical analysis of the relationship between technological and marketing innovations: a case of Polish manufacturing firms
Analiza empiryczna zależności między innowacjami technologicznymi a innowacjami marketingowymi na przykładzie polskich przedsiębiorstw przemysłowych
Autorzy:
Kijek, T.
Powiązania:
https://bibliotekanauki.pl/articles/37373.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
empirical analysis
relationship
technological innovation
marketing innovation
Polska
manufacturing enterprise
expenditure
innovation activity
firm activity
knowledge
product innovation
marketing method
Opis:
The article deals with the issue of the links between technological and marketing innovations. The theoretical part of the paper presents defi nitions and key features of marketing innovations, as well as it indicates the potential cause-effect relations between decisions to introduce process and product innovations and the implementation of new methods in marketing mix. The empirical part of the paper verifi es formulated hypotheses using data derived from the survey on innovation activity of Polish manufacturing enterprises in the years 2008–2010. The results of research show the positive impact of propensity to adapt product innovations on marketing innovations activity of enterprises. Moreover, expenditures on acquisition of knowledge from external sources and expenditures on marketing for new and signifi cantly improved products turned out to be factors stimulating enterprises to implement changes in marketing methods.
Artykuł podejmuje problematykę związaną z relacjami między innowacjami technologicznymi a innowacjami marketingowymi. W części teoretycznej opracowania przedstawiono defi nicje i charakterystykę innowacji marketingowych oraz wskazano na potencjalne zależności przyczynowo-skutkowe między decyzjami o wdrożeniu innowacji produktowych i procesowych a implementacją nowych metod w zakresie marketingu mix. W części empirycznej artykułu dokonano weryfi kacji sformułowanych hipotez badawczych na podstawie danych pochodzących z badania aktywności innowacyjnej polskich przedsiębiorstw przemysłowych w latach 2008–2010. Wyniki badania wskazują na pozytywny wpływ skłonności do wprowadzania innowacji produktowych na aktywność przedsiębiorstw w zakresie stosowania innowacji marketingowych. Ponadto, czynnikami stymulującymi przedsiębiorstwa do implementacji zmian w metodach marketingowych okazały się nakłady inwestycyjne na zakup wiedzy ze źródeł zewnętrznych oraz nakłady inwestycyjne na marketing dotyczący nowych i istotnie ulepszonych produktów.
Źródło:
Acta Scientiarum Polonorum. Oeconomia; 2013, 12, 2
1644-0757
Pojawia się w:
Acta Scientiarum Polonorum. Oeconomia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Difficult-to-measure integration measurement method for designing processes in a chain-like structure of conflicted cells in a supply chain.
Autorzy:
Ratkiewicz, Andrzej
Walczak, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/2176133.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
integration measurement method
supply chain
integration measurement
technological processes design
metoda pomiaru integracji
łańcuch dostaw
pomiar integracji
projektowanie procesów technologicznych
Opis:
The paper presents an approach for integrating conflicted cells in a chain-like structure based on a measurement of the level of integration of this structure. The authors’ prior experience suggests an assumption that conflicts always arise when cells are connected by a flow of materials, information, and money, although at different intensity levels. Usually, the intensity levels of said conflicts depend on the cooperation culture within a supply chain. This is a highly multidimensional problem, reflected by the literature referred to in this paper and related to this subject matter. The proposed approach treats technological processes between conflicted cells as an area of potential integration of these cells. Then, the integration becomes a problem of selecting the appropriate variant of realizing a technological process conducted in an area common for potentially conflicted cells of a company. The same approach may be used for cells belonging to separate production and distribution companies operating within a mutual supply chain. The paper proposes a method for measuring the integration level of neighboring cells, as a difficult-to-measure feature, by determining an integration loss index. Also, the paper presents a multi-criteria method based on the fuzzy set theory for selecting a preferred variant of a technological process. A presented example uses this method in a supply chain to maximize the integration level between Shipping and Recipient cells/links. It has been assumed that the preferred realization variant of the flow process will be based on the following criteria: 1) shipping cost; 2) shipping quality; 3) shipping time. Also, an algorithm is shown for applying the presented methodology, which is helpful for managers interested in increasing the integration level of a supply chain. The methodology allows for increasing the integrity of conflicted cells both in newly designed supply chains as well as in existing ones when remodeled or reorganized. Moreover, the paper indicates some problems associated with the efficient implementation of the proposed method.
Źródło:
Archives of Transport; 2022, 64, 4; 27--43
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody głównych składowych w kartach kontrolnych procesów wieloparametrowych
Application of Principal Components Method in Control Charts of Multi-Parameter Processes
Autorzy:
Volodarsky, Evgeniy T.
Kozyr, Oleh
Warsza, Zygmunt Lech
Powiązania:
https://bibliotekanauki.pl/articles/27312458.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
kontrola wieloparametrowego procesu technologicznego
karty kontrolne Shewharta
metoda głównych składowych
Shewhart control charts
principal components method
control of a multi-parametric technological process
Opis:
W artykule opisano metodę głównych składowych PC (ang. Principal Components) służącą do tworzenia kart kontrolnych dla wieloparametrowych procesów wytwórczych o skorelowanych parametrach. Ocenę skuteczności zastosowania tej metody przeprowadzono na symulowanych danych, zbliżonych do wyników pomiarów uzyskanych w sterowaniu rzeczywistym procesem technologicznym. W wyniku modelowania kontroli procesu n-parametrowego otrzymano potwierdzenie skuteczności tej metody. Praca ta kontynuuje cykl publikacji autorów o kartach stosowanych w metodach kontroli jakości produkcji.
The article describes in detail the method of constructing control charts based on principal components. Evaluation of the effectiveness of the application of the method is carried out on simulated data, which are close to the measurement results obtained during the control of a real technological process. The results show that the proposed method is effective for controlling a multi-parameter technological process in the presence of a correlated parameters.
Źródło:
Pomiary Automatyka Robotyka; 2023, 27, 3; 65--71
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Differences between technological and textural parameters of meat from farmed and wildlife red deer (Cervus elaphus) determined by PCA method
Różnice pomiędzy parametrami technologicznymi i teksturalnymi mięsa jeleni (Cervus elaphus) hodowlanych i dziko żyjących określone metodą składowych głównych
Autorzy:
Kral, M.
Snirc, M.
Tremlova, B.
Powiązania:
https://bibliotekanauki.pl/articles/825883.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
farmed deer
wildlife animal
red deer
Cervus elaphus
meat
difference
technological parameter
texture parameter
determination
PCA method zob.principal component analysis
principal component analysis
Źródło:
Żywność Nauka Technologia Jakość; 2018, 25, 3
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological and Economical Aspects of Modern Modeling of Thread Rolling Process
Ekologiczne i ekonomiczne aspekty nowoczesnego modelowania procesu walcowania gwintów
Autorzy:
Kukiełka, K.
Powiązania:
https://bibliotekanauki.pl/articles/1813907.pdf
Data publikacji:
2017
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
thread rolling
eco modelling
ecological technological process
variational formulation
Finite Element Method
walcowanie gwintów
eko-modelowanie
ekologiczne procesy technologiczne
sformułowanie wariacyjne
metoda elementów skończonych
Opis:
In this study, a modern way to develop a numerical model of the thread rolling process was shown by using variational formulation and the finite element method also the effect of the main process parameters were analyzed. The thread rolling process was considered a geometrical, physical and thermal nonlinear problem with unknown boundary conditions in the contact area of the system, such as the tool and workpiece. The nonlinearity of the material was described using the incremental model, making allowance for the effects of strain, strain rate and temperature history. The work pieces (pipe or bar) have been considered treating an object as a body which can undergo thermo-elastic strains (in the range of reversible strain), thermo, viscous, plastic and phasis (in the range of permanent strains). This body (thermo-elastic/thermo-visco-plastic-phasis) has been designated as TE/TVPF. The material model was prepared making use of Huber-Mises-Hencky’s nonlinear condition of thermo-plasticity, the associated law of flow and the mixed (isotropic-kinematical) strain hardening. The state of material after pre-processing was also taken into consideration introducing the initial conditions of displacements, strains, stresses, temperature and their rates. Then, the incremental functional as the total enthalpy of the system, were derived. From stationary condition of this functional, nonlinear variational equation of motion and heat transfer for object on the typical incremental step time was derived.
W pracy przedstawiono nowoczesny sposób opracowania numerycznego modelu procesu walcowania gwintów przy wykorzystaniu rachunku wariacyjnego i Metody Elementów Skończonych oraz analizowano wpływ najważniejszych parametrów obróbki. Proces walcowania gwintów rozpatrywano jako geometrycznie, fizycznie oraz termicznie nieliniowy problem, z nieznanymi warunkami brzegowymi w strefie kontaktu narzędzia i przedmiotem. Opisu nieliniowości materiału dokonano modelem przyrostowym uwzględniając wpływ historii odkształceń, prędkości odkształceń i temperatury. Przedmiot (pręt lub rurę) traktuje się, jako ciało, w którym mogą wystąpić odkształcenia termo-sprężyste (w zakresie odkształceń odwracalnych) oraz termiczne, lepkie, plastyczne i fazowe (w zakresie odkształceń nieodwracalnych), z nieliniowym umocnieniem. Ciało to oznaczono skrótowo TE/TVPF (termo-sprężyste/termo-lepko-plastyczno-fazowe). Do budowy modelu materiałowego zastosowano nieliniowy warunek termo-plastyczności Hubera-Mises'a-Hencky'ego, stowarzyszone prawo płynięcia oraz wzmocnienie mieszane (izotropowo-kinematyczne). Uwzględniono również stan materiału po obróbkach poprzedzających przez wprowadzenie początkowych stanów: przemieszczeń, naprężeń, odkształceń, temperatury i ich prędkości. Model matematyczny uzupełniono przyrostowymi równaniami ruchu ciepła oraz warunkami jednoznaczności. Następnie, wprowadzono funkcjonał przyrostowy całkowitej entalpii układu. Z warunku stacjonarności tego funkcjonału wyprowadzono wariacyjne, nieliniowe równanie ruchu ciepła w obiekcie dla typowego kroku przyrostowego.
Źródło:
Rocznik Ochrona Środowiska; 2017, Tom 19; 122-142
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulations of the Thread Rolling Process as Ecological and Economical Research Tool in the Implementation of Modern Technologies
Symulacje numeryczne procesu walcowania gwintów jako ekologiczne i ekonomiczne narzędzie badawcze w procesie wdrażania nowoczesnych technologii
Autorzy:
Kukiełka, K.
Powiązania:
https://bibliotekanauki.pl/articles/1813917.pdf
Data publikacji:
2017
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
walcowanie gwintów
eko-modelowanie
ekologiczne procesy technologiczne
sformułowanie wariacyjne
metoda elementów skończonych
thread rolling
eco modelling
ecological technological process
variational formulation
Finite Element Method
Opis:
In the this paper the solutions of discrete equations of the heat transfer of the object in the thread rolling process with applied explicit and implicit integrations methods, were shown. Examples of simulations of the rolling process in ANSYS programs are presented. Also the temperature distributions for various value of rolling velocity were shown.
W pracy przedstawiono sposób rozwiązywania dyskretnego równania ruchu ciepła w obiekcie podczas procesu walcowania gwintów przy wykorzystaniu metod jawnego i niejawnego całkowania. Zamieszczono przykładowe wyniki analiz numerycznych dla procesu walcowania gwintów w programie ANSYS. Pokazano również rozkłady temperatur dla różnych wartości prędkości walcowania.
Źródło:
Rocznik Ochrona Środowiska; 2017, Tom 19; 161-180
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowoczesna metodyka modelowania i analizy nieliniowych zjawisk kontaktowych występujących w procesach obróbki części samochodowych Metodą Elementu Skończonego
Modern methodology of modeling and analysis of nonlinear phenomena in the contact zone occuring in treatment processes of the automobile part using Finite Element Method
Autorzy:
Lipiec, I.
Kukiełka, L.
Kukiełka, K.
Powiązania:
https://bibliotekanauki.pl/articles/315738.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
procesy technologiczne
obróbka powierzchniowa
warstwa wierzchnia
kontakt nieliniowy
modelowanie
metoda elementu skończonego
równania dyskretne
metoda explicit
analiza numeryczna
MES
technological processes
metal forming
surface layer
nonlinear contact
modelling
finite element method
FEM
discretized model
dynamic explicit method
numerical analysis
Opis:
W artykule przedstawiono problematykę modelowania i analizy numerycznej nieliniowych zjawisk fizycznych występujących w procesach technologicznych wytwarzania części samochodowych. Procesy te rozpatrzono jako geometrycznie, fizycznie i cieplnie nieliniowe zagadnienie brzegowo-początkowe, z nieznanymi warunkami brzegowymi w obszarze kontaktu. Do opisu zjawisk nieliniowych, na typowym kroku przyrostowym, wykorzystano uaktualniony opis Lagrange'a, traktując narzędzie jako ciało sztywne lub termo-sprężyste natomiast przedmiot jako ciało sprężysto/termo-lepko-plastyczne. Równanie ruchu obiektu wyprowadzono wykorzystując rachunek wariacyjny. Otrzymane równanie wariacyjne dyskretyzowano stosując aproksymację właściwą metodzie elementu skończonego. Dyskretne równanie rozwiązano stosując jawne metody całkowania. Opracowana aplikacja w systemie ANSYS/LS-Dyna, pozwala nakompleksową analizę stanów przemieszczeń, odkształceń, naprężeń w dowolnym miejscu ciała i w dowolnej chwilirealizacji różnych procesu obróbki nagniatania gładkościowego. Przedstawiono przykładowe wyniki obliczeń numerycznych stanów przemieszczeń, naprężeń i odkształceń materiału części w procesie nagniatania gładkościwego.
Paper presents the problem of modelling and analysis of metalworking processes. Technological processes were considered as a geometrical, physical and thermal boundary and initial value problem, with unknown boundary conditions in the contact zone. An incremental model of the contact problem between movable rigid or thermo-elastic body (tool) and elastic/thermo-visco-plastic body (object) in updated Lagrange formulation, for spatial states (3D) was considered. The incremental functionalof the total energy and variational, non-linear equation of motion of object on the typical step time were derived. This equation has been discretized by finite element method, and the system of discrete equations of motion and heat transfer of objects were received. For solution of these equations the explicit or implicit methods was used. The applications were developed in the ANSYS/LS-Dyna system, which makes possible a complex time analysis of the states of displacements, strains and stresses, in the workpieces in fabrication processes. Application of this method was showed for examples the modelling and the analysis of burnishing rolling.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 8; 291-302
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostics and Renovation of Moisture Affected Historic Buildings
Autorzy:
Ksit, Barbara
Szymczak-Graczyk, Anna
Nazarewicz, Bogdan
Powiązania:
https://bibliotekanauki.pl/articles/27314713.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
historic buildings
diagnostics of masonry
technological moisture
drainage of masonry
renovation
non-invasive methods
invasive method
budynki zabytkowe
ocena murów
zawilgocenie
osuszanie murów
renowacja
metody nieinwazyjne
metoda inwazyjna
Opis:
The work concerns issues related to the diagnostics of moisture in historic buildings. Moisture content is one of the basic physical properties of materials. Excessive and undesirable growth of moisture in masonry causes considerable damage to masonry wall assemblies. It reduces the load-bearing capacity of structural elements, causes difficulties with heating and contributes to the development of mould and fungi. The article describes diagnostic procedures, provides available drying methods for walls in buildings and the applied method of renovation based on the example of damage caused by moisture in an examined historic facility.
Źródło:
Civil and Environmental Engineering Reports; 2022, 32, 1; 59--73
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of grinding conditions of gears made of 20MnCr5 steel after single-piece flow heat treatment on the condition of the surface layer of the tooth working surface
Autorzy:
Stachurski, W.
Janica, J.
Januszewicz, B.
Pawłowski, W.
Sawicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/24200636.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
thermo-chemical treatment
vacuum carburizing
single-piece flow method
gear grinding
technological surface layer
obróbka cieplno-chemiczna
nawęglanie próżniowe
jednoczęściowa metoda przepływowa
szlifowanie kół zębatych
technologiczna warstwa wierzchnia
Opis:
Purpose: The paper investigated the effect of selected processing conditions during gear grinding on the value and distribution of microhardness and residual stress formed in the technological surface layer of gears after thermochemical treatment (TCT) conducted by a continuous single-piece flow method. Design/methodology/approach: The gears were carburised with LPC at 920°C, then quenched in a 4D Quenching chamber at 7 bar and tempered at 190ºC for 3 hours. In the next step, the working surfaces of the gear teeth were ground by supplying grinding fluid (GF) to the grinding zone using the WET method and the MQL method with a minimum amount. Measurements were made on the distribution of microhardness and residual stress formed in the technological surface layer of gears after thermochemical treatment and after the grinding process. Findings: The results of the study showed the influence of workpiece speed vw and the method of delivery to the grinding zone GF on selected parameters describing the condition of the technological surface layer of the teeth of gears made of 20MnCr5 steel. The grinding process with a white aluminium oxide grinding wheel causes deterioration in the material's residual stress state. For each of the three analysed workpiece speeds vw, smaller changes in microhardness with respect to the microhardness of the material before grinding occur in the surface layer of samples ground with GF fed with the MQL method. Similarly, residual stress values are in the area of favourable compressive stresses. Research limitations/implications: Environmental considerations and the need to comply with increasingly stringent environmental protection and worker safety regulations are pushing researchers and entrepreneurs to completely eliminate or reduce the consumption of grinding fluids in the grinding process. Based on the research and analysis carried out in this study, it was concluded that applying minimum GF by the MQL method could be an alternative to the conventional WET method.Practical implications: In sustainable manufacturing, it is extremely important to produce high-quality items while reducing the cost of manufacturing and taking care of the environment and workers' health. This includes the manufacture of gears, a basic component used in gear transmissions in the automotive industry, for example. The research has established that it is possible to use the MQL method, which reduces the amount of GF used when grinding the working surfaces of gear teeth, as an alternative to the conventional WET method. Originality/value: The conducted research was the first to determine the most favourable conditions, in terms of the obtained residual stresses and microhardness, for grinding the working surface of gear teeth using the MQL method.
Źródło:
Archives of Materials Science and Engineering; 2023, 120, 2; 60--69
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modern methods for modelling and analysis of technological processes of car parts and their topological optimization
Nowoczesne metody modelowania i analizy procesów technologicznych części samochodowych i ich optymalizacja topologiczna
Autorzy:
Kukiełka, L.
Patyk, R.
Kukiełka, K.
Chodór, J.
Lipiński, K.
Powiązania:
https://bibliotekanauki.pl/articles/313431.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
car parts
topological optimization
technological processes
metal forming
surface layer
modelling
finite element method
numerical analysis
części samochodowe
optymalizacja topologiczna
procesy technologiczne
obróbka plastyczna
warstwa wierzchnia
modelowanie
metoda elementów skończonych
Opis:
Paper presents the problem of modelling and analysis of metalworking processes. Technological processes were considered as a geometrical, physical and thermal boundary and initial value problem, with unknown boundary conditions in the contact zone. An incremental model of the contact problem between movable rigid or thermo-elastic body (tool) and thermo-elastic/thermo-visco-plastic-phases body (object) in updated Lagrange formulation, for spatial states (3D) was considered. The incremental functional of the total energy and variational, non-linear equation of motion of object and heat transfer on the typical step time were derived. This equation has been discretized by finite element method, and the system of discrete equations of motion and heat transfer of objects were received. For solution of these equations the explicit or implicit methods was used. The applications were developed in the ANSYS/LS-Dyna system, which makes possible a complex time analysis of the states of displacements, strains and stresses, in the workpieces in fabrication processes. Application of this method was showed for examples the modelling and the analysis of burnishing rolling, thread rolling and turning processes. The numerical result were verified experimentally. The topic of topological optimization of car parts is also presented.
W artykule przedstawiono problematykę modelowania i analizy numerycznej procesów technologicznych obróbki części samochodowych. Proces te rozpatrzono jako geometrycznie, fizycznie i cieplnie nieliniowe zagadnienie brzegowo-początkowe, z nieznanymi warunkami brzegowymi w obszarze kontaktu. Do opisu zjawisk nieliniowych, na typowym kroku przyrostowym, wykorzystano uaktualniony opis Lagrange'a, traktując narzędzie jako ciało sztywne lub termo-sprężyste natomiast przedmiot jako ciało termo-sprężyste/termo-lepko-plastyczne-fazowe. Równania ruchu obiektu i ciepła wyprowadzono wykorzystując rachunek wariacyjny. Otrzymane równania wariacyjne dyskretyzowano stosując aproksymację właściwą metodzie elementu skończonego. Dyskretne równania rozwiązano stosując jawne metody całkowania. Opracowano aplikacje w systemie ANSYS/LS-Dyna, które pozwalają na kompleksową analizę stanów przemieszczeń, odkształceń, naprężeń w dowolnym miejscu ciała i w dowolnej chwili realizacji procesu obróbki. Przedstawiono przykładowe wyniki obliczeń numerycznych stanów naprężeń i odkształceń wybranych procesów technologicznych: nagniatania, walcowania gwintów i toczenia. Wyniki obliczeń numerycznych weryfikowano eksperymentalnie. Przedstawiono również problematykę optymalizacji topologicznej części samochodowych.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 7-8; 343-351
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dawki i sposobu nawożenia azotem na plon i wartość technologiczną ziarna odmian pszenicy ozimej
Effect of nitrogen fertilization doses and way of its application on yield and technological quality of winter wheat cultivars grain
Autorzy:
Podolska, G.
Powiązania:
https://bibliotekanauki.pl/articles/46681.pdf
Data publikacji:
2008
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
dawki nawozowe
gluten
liczba opadania
metody nawozenia
nawozenie azotem
odmiany roslin
plony
pszenica ozima
wartosc technologiczna
zawartosc bialka
ziarno
fertilization method
fertilizer dose
grain
nitrogen fertilization
plant cultivar
protein content
technological value
winter wheat
yield
Opis:
W doświadczeniu polowym prowadzonym w Zakładzie Doświadczalnym IUNG Puławy w latach 2004-2006 badano plonowanie oraz wartość technologiczną ziarna dwu odmian pszenicy ozimej: Sukces i Tonacja w zależności od dawki i sposobu nawożenia azotem. Dawki azotu: 0, 120, 180 kg N·ha-1 aplikowano dwu- lub trzykrotnie w okresie wegetacji. Korzystniejsze dla wielkości plonu było zastosowanie 120 kg N·ha-1 w dwóch dawkach i 180 kg N·ha-1 – niezależnie od podziału. Zastosowanie 120 kg N·ha-1 w trzech dawkach w okresie wegetacji powodowało wzrost zawartości białka i glutenu w porównaniu z dwukrotną aplikacją azotu. Podział dawki 180 kg N·ha-1 nie miał wpływu na kształtowanie się cech jakościowych ziarna pszenicy odmiany Sukces i Tonacja.
The grain yield and technological quality of two winter wheat cultivars Sukces and Tonacja depending on nitrogen fertilization doses and way of N application were determined and described in the field experiment conducted in Puławy Experimental Station in 2004-2006. Three nitrogen fertilization doses 0, 120, 180 kg N·ha-1 and two ways of nitrogen application (two times and tree times) were applied in this experiment. The biggest grain yield was obtained with nitrogen fertilization at a dose of 180 kg N·ha-1 and 120 kg N·ha-1 applied in two doses during growing period. Nitrogen fertilization applied at a dose of 120 kg N·ha-1 three times during the growing period of winter wheat caused an increase in protein and gluten content and sedimentation value compared with two times. The way of nitrogen fertilization applied at a dose of 180 kg N·ha-1 had no significant influence on grain quality.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2008, 07, 1
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Applying blended foresight methods for revealing incentives and future strategies of key national innovation system players
Autorzy:
Chulok, Alexander
Powiązania:
https://bibliotekanauki.pl/articles/2086478.pdf
Data publikacji:
2021
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
foresight method
blended foresight
technological change and its management
national innovation system
global trends
new institutional economics
planning models and polic
metoda prognozowania
mieszany foresight
zmiana technologiczna
krajowy system innowacji
światowe trendy
nowa ekonomia instytucjonalna
planowanie modele i polityka
Opis:
The paper aims to develop and apply a methodological approach that could help to reveal incentives and future strategies of key National Innovation System (NIS) players considering the influence of global social, economic, scientific, technological and ecological trends. To fulfil this aim, a blended foresight methodology was applied, grounded on the platform of economic and classic foresight theory and considering four possible directions for using foresight methods: investigating and building a common vision; supporting evidence-based decisions; promoting communication and participation; inducing transformation and integration into the decision-making process. The main results and findings of the research include a list of 19 global trends, defined from literature analysis and the author’s expert knowledge, a short description of their influence on key NIS players, including society, business, infrastructure and institutions, science, education and government; and mapping more than 35 different foresight methods that could be used for revealing incentives and future strategies of key NIS players. The article’s theoretical contribution to economic theory consists of several parts. First, a NIS conception is examined through the prism of global trends and a dynamic aspect, whereas it is mostly investigated from statistical and static perspectives. Second, applying foresight as an instrument for researching NIS as a system is a developing academic area with some theoretical gaps, considered in this article by designing a conceptional research framework. Third, blending different foresight methods is always a craft, and the approach applied in this article contributes to it. Finally, the article presents several important trends which will appear in NIS and its key players’ transformation in the nearest 5–10 years. From practical implications, this article could be useful for proactive policymakers in the field of science, technology and innovation policy at national and regional levels for designing and providing measures for supporting innovation systems effectively. Foresight practitioners and experts are offered useful, practical ideas of different foresight methods and their possible combinations for everyday activities.
Źródło:
Engineering Management in Production and Services; 2021, 13, 4; 160--173
2543-6597
2543-912X
Pojawia się w:
Engineering Management in Production and Services
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tarcie ziarna pszenicy
Friction of wheat grain
Autorzy:
Molenda, M
Horabik, J.
Grochowicz, M.
Szot, B.
Powiązania:
https://bibliotekanauki.pl/articles/1628372.pdf
Data publikacji:
1995
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
agrofizyka
materialy sypkie
zboza
pszenica
ziarno
wilgotnosc ziarna
gestosc ziarna
tarcie zewnetrzne
tarcie wewnetrzne
wspolczynnik tarcia
metody pomiarow
przyrzady pomiarowe
wlasciwosci mechaniczne
procesy technologiczne
agrophysics
granular material
cereal
wheat
grain
grain moisture
grain density
external friction
internal friction
friction coefficient
measurement method
measurement device
mechanical property
technological process
Opis:
All phases of particulate material industry, namely, storage, handling and processing are operations that require precise knowledge of the behaviour of the material to achieve the desired control.External and internal friction of particulate material greatly influence its mechanical behaviour.A lot of work was done on agricultural grain since 1960`s. This work summarizes the methods and results of these studies and presents the results of the autor1s own experiments. It was divided into two parts: 1.Internal friction and 2. External friction. Own studies for the first section were performed using direct shearing box and triaxial compression chamber which dimensions were anlarged to regard the size of cereal grain. Density, moisture content of grain and its spatial orientation were taken into account as the most important factors forinternal friction. All of them were found to influence significantly the angle of internal friction of grain. For the external friction section own method of measurements was applied. Friction coefficient was measured for a part of wheat grains sliding against a steel or glass platesandwiched between them. The true contact area of grain with a flat glass surface was measured with microscope photography in reflected light. The relations between tangential force and normal force on the one hand and the true contact area versus normal force on the other were obtained and examined. Parameters taken into account were: grain moisture content, type of endosperm, cutin cover, variety, location of cultivation, and roughness of sliding surface and that of grain itself. All these factors were found to influence significantly obtained frictional characteristics. The obtained results pointed out to the fact that both internal and external friction of cereal grain depend on a number of factors which caused unexplained scatter of experimental results, and in a greater part of theoretical works were left out of account.
Źródło:
Acta Agrophysica; 1995, 04; 3 - 88
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-27 z 27

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies