Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xu, H." wg kryterium: Autor


Wyświetlanie 1-71 z 71
Tytuł:
Memoryless equilibrium strategies in multilevel decision processes of discrete-time descriptor systems
Autorzy:
Xu, H.
Mizukami, K.
Kobara, M.
Powiązania:
https://bibliotekanauki.pl/articles/205573.pdf
Data publikacji:
1998
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
gra dynamiczna
description system
discrete-time system
dynamics games
memoryless equilibrium strategies
Opis:
Applying a general theorem developed by Basar (1981), providing a set of sufficient conditions for a triple of strategies to be in hierarchical equilibrium, to games in normal (strategic) form, we study three-player Stackelberg games for linear quadratic discrete-time descriptor systems with three levels of hierarchy in decision making. We derive explicitly sufficient conditions for the existence of the memoryless hierarchical equilibrium strategies for the player (called P[sub 1]) at the top of the hierarchy, and for the player (called P[sub 2]) at the second level of the hierarchy. Since the resulting hierarchical equilibrium strategies do not depend on the memory information, P[sub 1]'s original optimal team cost remains the tight (attainable) lower bound for P[sub 1]'s cost function no matter whether the players at the lower levels of hierarchy act or not at the last two (or one) stages. Moreover, the resulting strategies have the advantages of simpler structure and higher credibility. A numerical example is solved to illustrate the validity of the results.
Źródło:
Control and Cybernetics; 1998, 27, 1; 81-103
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fixed final time optimal adaptive control of linear discrete-time systems in input-output form
Autorzy:
Zhao, Q.
Xu, H.
Jagannathan, S.
Powiązania:
https://bibliotekanauki.pl/articles/91798.pdf
Data publikacji:
2013
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
fixed final time
discrete-time linear system
adaptive control
adaptive regulation
input/output form
Opis:
In this paper, the fixed final time adaptive optimal regulation of discrete-time linear systems with unknown system dynamics is addressed. First, by transforming the linear systems into the input/output form, the adaptive optimal control design depends only on the measured outputs and past inputs instead of state measurements. Next, due to the time-varying nature of finite-horizon, a novel online adaptive estimator is proposed by utilizing an online approximator to relax the requirement on the system dynamics. An additional error term corresponding to the terminal constraint is defined and minimized overtime. No policy/value iteration is performed by the novel parameter update law which is updated once a sampling interval. The proposed control design yields an online and forward-in-time solution which enjoys great practical advantages. Stability of the system is demonstrated by Lyapunov analysis while simulation results verify the effectiveness of the propose approach.
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2013, 3, 3; 175-187
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the effect of variable compression ratios performance on opposed piston 2-stroke engine
Autorzy:
Alqahtani, A.
Wyszynski, M. L.
Mazuro, P.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/133658.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
opposed-piston
AVL BOOST
VCR
compression ratio
numerical simulation
tłok przeciwbieżny
stopień sprężania
symulacja numeryczna
Opis:
Numerous skills involving the introduction of (OP) opposed piston engine have been developed in the recent past. Indeed, novel techniques can help to improve the performance of the engine. The aim of this paper is to model and simulate a simple single-cylinder two-stroke opposed-piston engine and minimise fuel consumption and heat loss, using the software programme AVL BOOST™. AVL BOOST is an engine modelling software, which analyses the performance of a modelled single cylinder two-stroke opposed-piston engine by changing desired parameters. In order to meet this aim, experimental results from a unique engine are used to make a comparison with the results obtained from AVL BOOST model. Six combinations of compression ratios (12, 13.5, 15, 16.5, 18 and 19.5) are analysed in this study with the engine speed running at 420 rpm and 1500 rpm. In addition to the compression ratios, the effect of stroke-to-bore (S/B) ratios on OP2S performance is investigated. Various values of S/B ratios, whilst maintaining a constant swept volume, port geometry and combustion timing, and their effect on fuel consumption and heat loss are analysed in this study. A comparison between the two engine speeds with increasing combinations of compression ratios, and the S/B ratios revealed minimal differences in peak pressure, peak temperature, IMEP, ISFC, indicated efficiency and total heat loss. Detailed analyses of these parameters are highlighted in discrete sections of this paper.
Źródło:
Combustion Engines; 2017, 56, 4; 97-106
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of quinoline from aqueous solutions by lignite, coking coal and anthracite. Adsorption isotherms and thermodynamics
Autorzy:
Xu, H.
Huagn, G.
Li, X.
Gao, L.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110016.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quinoline adsorption
coking coal
adsorption isotherms
thermodynamics
Opis:
Based on the concept of circular economy, a novel method of industrial organic wastewater treatment by using adsorption on coal is introduced. Coal is used to adsorb organic pollutants from coking wastewaters. After adsorption, the coal would be used for its original purpose, its value is not reduced and the pollutant is thus recycled. Through systemic circulation of coking wastewater zero emissions can be achieved. Lignite, coking coal and anthracite were used as adsorbents in batch experiments. The quinoline removal efficiency of coal adsorption was investigated. The coking coal and anthracite exhibited properties well-suited for adsorption onto both adsorbents. The experimental data were fitted to Langmuir and Freundlich isotherms as well as Temkin, Redlich–Peterson (R-P) and Dubinin-Radushkevich (D-R) models. Both Freundlich Isotherm and D-R model provided reasonable models of the adsorption process. The thermodynamic parameters of quinoline adsorption on coking coal were calculated. The thermodynamic parameters indicated that the adsorption process is exothermic and is a physical adsorption. The △S° value indicated that the adsorption entropy decreased because the adsorbate molecule was under restrictions after it adsorption on the coal surface. The coal adsorption method for removing refractory organic pollutants is a great hope for achieving zero emission waste water for a coking plant.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 214-227
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pretreatment of coking wastewater by an adsorption process using fine coking coal
Autorzy:
Gao, L.
Li, S.
Wang, Y.
Gui, X.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/110417.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coking coal
coking wastewater
adsorption
COD
phenol
Opis:
A new technique for pretreatment of coking wastewater is introduced based on the concept of circular economy. Coal is fed into a coking system after adsorption. This study validates the feasibility of using coking coal to adsorb organic pollutants in coking wastewater. The sorption kinetics and equilibrium sorption isotherms of coking coal for removal of chemical oxygen demand (COD) and phenol from coking wastewater was also discussed in this paper. Gas chromatograph/mass spectroscopy (GC/MS) was used to detect changes in the quality of coking wastewater. The results showed that when coking coal dosage was 120 g/dm3, 65% of COD and 34% of phenol in waste water can be removed after 40 min of agitation. The surface functional groups of coking coal before and after adsorption were observed with a Fourier transform infrared spectrometer. The kinetics of COD and phenol adsorption from coking wastewater by coking coal fitted the pseudo second-order model. The adsorption process of coking coal can be classified into two categories, namely, rapid and slow. The Freundlich isotherm provided a better fit with all adsorption isotherms than the Langmuir isotherm. Coking coal could be a suitable low-cost adsorbent for recalcitrant organic pollutants.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 422-436
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of the staminate flower and pollen from autotetraploid Betula platyphylla
Autorzy:
Lin, L.
Yao, Q.
Xu, H.
Mu, H.
Jiang, J.
Powiązania:
https://bibliotekanauki.pl/articles/41710.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Opis:
Comparison of the staminate flower and pollen of Betula platyphylla between autotetraploid and diploid individuals may reveal the reason for cross sterility when an autotetraploid male parent is crossed with a diploid female parent. Staminate flowers and pollen from seven autotetraploid individual trees were examined. The morphologies of the staminate flower and pollen and pollen germination of these autotetraploid individuals were compared with diploid trees. The structure of the staminate flower did not differ between autotetraploids and diploids, whereas the size of the staminate flower was larger in the autotetraploids compared with the diploids. The mean diameter and pore depth of the pollen were significantly larger in autotetraploid individuals compared with diploids, and several abnormalities in pollen morphology were found commonly amongst pollen from the autotetraploid trees. The germination rate of pollen from autotetraploids was significantly inferior to that of diploids and there was a significant negative correlation between germination rate and the percentage of abnormal pollen. These results demonstrate that the autotetraploid should not be chosen as the male parent to obtain hybrid triploid progenies because the pollen is abnormal and results in low fertility despite its large size. The results provide important information for selecting and distributing parent strains with the aim of building seed orchards of triploid birch trees.
Źródło:
Dendrobiology; 2013, 69
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy feature of a multi-flow column flotation process
Autorzy:
Cheng, G.
Yu, Y.
Ma, L.
Xia, W.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/109768.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation column
turbulent kinetic energy
turbulent dissipation rate
bubble
Opis:
A cyclonic-static micro-bubble flotation column (FCSMC) has been widely used in mineral separation. FCSMC includes countercurrent, cyclone and jet flow mineralization zones in a single column. In this study, the energy feature of the three different zones was compared. The turbulent flow was evaluated in terms of the turbulent kinetic energy (k) and the turbulent dissipation rate (ε). An appropriate computing model was determined by comparing the flow field value measured by PIV with the results of the Fluent numerical simulation. Jet flow separation exhibited the maximum k and ε values among the three columns, whereas counter-current separation displayed the minimum values. The high circulating volumetric flowrate means great energy input and turbulent intensity. The higher turbulent dissipation rate, the smaller the bubble is. The better performance of the FCSMC was mainly attributed to the multiple mineralization steps. The floatability of mineral particles gradually decreases with an increase in flotation time, the mineralization energy gradually increased to overcome the decrease in mineral floatability. By contrast, the countercurrent was beneficial for recovering the coarse particles, and the jet flow was beneficial for recovering the fine particles.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1266-1284
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption mechanism of sodium oleate on titanium dioxide coated sensor surface using quartz crystal microbalance with dissipation
Autorzy:
Fan, G.
Liu, J.
Cao, Y.
Feng, L.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/110014.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
QCM-D
TiO2 coated sensor surface
sodium oleate
adsorption mechanism
Opis:
Quartz Crystal Microbalance with Dissipation (QCM-D) was firstly applied to investigate the adsorption mechanism of sodium oleate on TiO2 coated sensor surface. The effects of pH value, sodium oleate concentration, and temperature on TiO2 coated sensor surface were evaluated systematically using the QCM-D technique. Zeta potential, surface tension, adsorption isotherms, and adsorption thermodynamics were employed to characterize the adsorption process. The results showed the advantages of QCM-D on the investigation of the adsorption process. Additionally, the electrostatic equilibrium adsorption data was well matched to the Langmuir isotherm. Based on the thermodynamic analysis, adsorption was a spontaneous and endothermic physisorption process.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 597-608
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression analysis of multifunctional RNA-binding protein hnRNP K during development of mammalian testis
Autorzy:
Xu, H.
Zhang, P.
Li, R.
Wu, W.
Wang, S.
Xu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087724.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hnRNP K
testis development
spermatogenesis
pig
rat
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 343-352
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of gas holdup on the efficiency of cyclonic-static microbubble flotation column for oily wastewater treatment
Autorzy:
Ning, K.
Huang, G.
Xu, H.
Wu, L.
Li, X.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/208139.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble columns
efficiency
flotation
wastewater treatment
oil water separation
kolumna flotacyjna
efektywność
flotacja
oczyszczanie ścieków
separacja wody
Opis:
A cyclonic-static microbubble flotation column of a novel construction was used in oil-water separation fields and has high efficiency for oil-water separation. The gas holdup is a key parameter for the evaluation of the performance of a flotation column. The gas holdup, closely related to the bubble size, bubble velocity and superficial gas velocity, is one of the most important parameters characterizing the hydrodynamics of a bubble column. The effect of gas holdup in a cyclonic-static microbubble flotation column was investigated. In addition, several operating parameters such as the circulating pressure, superficial gas velocity, and frother consumption were also investigated. The gas holdup was positively correlated to the superficial gas velocity. The gas holdup of clean water and oil wastewater increased along with the increase of the frother consumption. The separation mechanism of cyclonic-static microbubble flotation column was analyzed.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 5-17
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of bubble-particle interactions in a column flotation process
Autorzy:
Cheng, G.
Shi, C.
Yan, X.
Zhang, Z.
Xu, H.
Lu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109635.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
particle
bubble
column flotation
collision
attachment
detachment
Opis:
Bubble-particle interactions play an important role in flotation. This study examines the behaviour of bubble clusters in a turbulent flotation cell. Particularly, the bubble-particle interaction characteristics in flotation are investigated. The bubble size in a flotation column was measured using an Olympus i-SPEED 3 high-speed camera. Relationships between the circulating volume, bubble size and bubble terminal velocity were discussed. Probabilities of collision, attachment, detachment and acquisition between bubbles and particles in different circulating volumes were calculated based on the flotation kinetic theory. Using the extended Derjaguin–Landau–Verwey–Overbeek (EDLVO) theory, the relationship between the potential energy and distance in bubble-particle interaction was analysed. The results demonstrated that as the circulating volume increased, the bubble size and velocity decreased. When the circulating volume increased from 0.253 to 0.495 m3/h, the bubble diameter decreased from 511 to 462 μm, and the corresponding bubble velocity decreased from 43.1 to 37.5 mm/s. When the circulating volume remained constant as the particle size increased, probabilities of collision, attachment, detachment and acquisition increased. When the particle size remained constant as the circulating volume increased, these probabilities also increased. At a constant circulating volume as the particle size increased, the absolute value of the total potential energy between the particle and bubble increased. When the distance between the bubble and particle was 30 nm, the energy barrier appeared.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 17-33
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic expression profile of DNA methyltransferases in rat testis development
Autorzy:
Xu, H.X.
Qin, J.Z.
Zhang, K.Y.
Zeng, W.X.
Powiązania:
https://bibliotekanauki.pl/articles/31635.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
DNA methyltransferases (Dnmts) are unique and perform specific functions during male germ cell development. To further characterize the significance of Dnmts in the events leading to production of spermatozoa, we investigated whether the expression patterns in Dnmt1, Dnmt3a, Dnmt3b and Dnmt3l were apparent in rat testes at different time points during development. The qRT-PCR results showed that expression levels of Dnmt3a and Dnmt3l were abundant before birth and were present at the highest levels in testes tissue at 18.5 days postcoitus (dpc), and gradually decreased from day 0 postpartum (dpp) to 90 dpp. Expression of Dnmt1 and Dnmt3b reached a peak after birth (P <0.01), and then gradually reduced until adulthood. Western blotting and immunolocalization analysis of Dnmt3a and Dnmt3b further confirmed the differential expression and localization of the two proteins during rat testis development. The dynamic expression profile of Dnmts implies specific and potentially nonredundant roles for each of these enzymes in the developing rat testis.
Źródło:
Polish Journal of Veterinary Sciences; 2015, 18, 3
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of quinoline from aqueous solutions by lignite, coking coal and anthracite. Adsorption kinetics
Autorzy:
Xu, H.
Wang, Y.
Huagn, G.
Fan, G.
Gao, L.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/110664.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quinoline adsorption
coking coal
kinetics
adsorption activation energy
coal adsorption
Opis:
Basing on the concept of circular economy, a novel method of industrial organic wastewater treatment by using adsorption on coal is introduced. Coal is used to adsorb organic pollutants from coking wastewaters. After adsorption, the coal would be used in its original purpose, as its value was not reduced and the pollutant was reused. Through the systemic circulation of coking wastewater zero emissions can be achieved. Lignite, coking coal and anthracite were used as adsorbents in batch experiments. The quinoline removal efficiency of coal adsorption was investigated. Both the coking coal and anthracite exhibited properties well-suited for quinoline adsorption removal. The experimental data were fitted to the pseudo-first- order and pseudo-second-order kinetic equations as well as intraparticle diffusion and Bangham models. An attempt was made to find the rate-limiting step involved in the adsorption processes. Both boundary-layer diffusion and intraparticle diffusion are likely involved in the rate-limiting mechanisms. Effect of pH on coal adsorptions by coking coal was investigated. The process of quinoline adsorption on coal was researched. The coal adsorption method for removing refractory organic pollutants is a great hope for achieving wastewater zero emission for coking plants.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 397-408
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic research of quinoline, pyridine and phenol adsorption on modified coking coal
Autorzy:
Sun, X.
Xu, H.
Wang, J.
Ning, K.
Huang, G.
Yu, Y.
Ma, L.
Powiązania:
https://bibliotekanauki.pl/articles/110365.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption kinetics
modification
coking coal
coking wastewater
Opis:
Adsorption is widely used in wastewater treatment. In this work, the removal of quinoline, pyridine and phenol from coking wastewater by using modified coking coal, which was treated by four different modification methods i.e. acidification sodium hydroxide (5 mol/dm3), hydrochloric acid (5 mol/dm3) and acetic acid (5 mol/dm3) and low-temperature (105 oC) oxidation, was investigated. The modified coal was characterized by the surface area analysis, SEM, total acidity and basicity and FT-IR. The results showed that the surface area from high to low follows the order: modification with acetic acid, modification with hydrochloric acid, raw coal, modification with sodium hydroxide and modification with low-temperature. Experimental data were fitted to pseudo-first-order, pseudo-second-order and intra-particle diffusion. The adsorption of all followed pseudo-second-order kinetics. The result showed that the removal efficiency of coal modified by hydrochloric acid and acetic acid are higher than raw coal, while modified by sodium hydroxide and low-temperature are lower than raw coal., The coal modified by hydroxide acid had the best adsorption capacity.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 965-974
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3D Simulation of Warp Knitted Structures with a New Algorithm Based on NURBS
Symulacja 3D struktur dzianych z zastosowaniem algorytmu opartego na algorytmie NURBS
Autorzy:
Xu, H Y
Chen, N L
Jiang, J H
Jin, L X
Wang, Z X
Powiązania:
https://bibliotekanauki.pl/articles/232913.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitted stitch
three-dimensional simulation
NURBS
joint of stitches
MATLAB
ścieg osnowy tkaniny
struktura dzianin
symulacja trójwymiarowy
algorytm NURBS
wspólne szwów
oprogramowanie Matlab
Opis:
In order to obtain a three-dimensional computer simulation of warp knitted structures with more flexibility and realism, a new algorithm using Matlab was developed by NURBS based on empirical geometrical loop models. With the principles of NURBS curves, once the values of data points are known, the control points with two coincidence points at the start and end points can be uncomplicatedly calculated by Matlab. Then the NURBS curve of a single typical stitch can be simulated flexibly by Matlab. A new typical stitch selected from two stitches simulated directly by the new method is redefined to improve the joint of neighboring stitches, and it is found that there are two types of redefined typical warp knitted stitches judged by whether the two under lap on the same side or not. Based on the redefined typical warp knitted stitch, two warp knitted structures are simulated regardless of the loop offset, and all the joints of stitches are smooth.
Przeprowadzono symulację komputerową struktur dzianin w wymiarze 3D, opracowując w tym celu nową procedurę opartą na algorytmie NURBS. Do tego celu wykorzystano oprogramowanie MATLAB. Symulację 3D przeprowadzono w oparciu o procedury numeryczne umożliwiające wykreślenie przestrzennych figur geometrycznych opisujących strukturę dzianin. Symulowano kształt oczek zamkniętych i otwartych podstawowych splotów kolumienkowych trykotu, sukna i aksamitu. W oparciu o 8 punktów referencyjnych zorientowano konfigurację pętli oczka i łącznika w postaci przestrzennej linii eliptycznej. Do zapisu struktury splotu kształtu oczek wykorzystywano aparat matematyczny w postaci macierzy.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 1 (109); 57-60
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite Element Modeling for the Uni-Axial Tensile Behaviour of Metallic Warp-Knitted Fabric
Zastosowanie metody elementów skończonych (FEM) do przewidywania jednoosiowego rozciągania dzianin metalicznych
Autorzy:
Xu, H.-Y.
Jiang, J.-H.
Chen, N.-L.
Lin, F.-B.
Shao, H.-Q.
Powiązania:
https://bibliotekanauki.pl/articles/231781.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp-knitted fabric
finite element analysis
tensile behavior
metallic
TexGen
dzianina osnowowa
analiza elementów skończonych
proces rozciągania
dzianina metaliczna
Opis:
The finite element analysis method (FEM), for its advantages of lower time and economic costing in predicting the mechanical properties of fabrics, was applied to warp-knitted fabrics. In this paper, two bar warp-knitted fabric knitted with wires was used as reflecting mesh antennas. Firstly the loop unit of the metallic warp-knitted fabric was simulated in 3-D by TexGen software. Secondly the 3-D loop unit model was inputted into ABAQUS software to form a model of the metallic warp-knitted fabric sheet for uni-axial tension analysis. Thirdly numerical results were obtained after setting the parameters in ABAQUS. Finally numerical results were verified by uni-axial tensile experiments on the metallic warp-knitted fabric. The results showed that the simulation was in good agreement with the experimental tensile process, where the transfer of yarns between loops when in low fabric elongation and in yarn elongation when in high fabric elongation were simulated by FEM of warp-knitted fabric in the tensile process. Also the same trend of tensile force was found in experiment and FEM results. Therefore it can be concluded that FEM can be used to predict the mechanical properties of warp-knitted fabric with a complex structure.
Do przewidywaniu mechanicznych właściwości dzianin metalicznych zastosowano metodę elementów skończonych (FEM). Symulacji 3D dzianin dokonano przy użyciu dwóch rodzajów oprogramowania: TexGen i ABAQU. Wyniki symulacji zweryfikowano eksperymentalnie. Stwierdzono, że symulacja charakteryzowała się zgodnością z eksperymentalnie przeprowadzonym procesem rozciągania. Na podstawie wyników stwierdzono, że metoda elementów skończonych (FEM) może być z powodzeniem wykorzystywana do przewidywania mechanicznych właściwości dzianin o złożonej strukturze.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 2 (128); 49-54
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability control of propeller Autonomous Underwater Vehicle based on combined sections method
Autorzy:
Qi, D.
Feng, J.
Liu, A.
Hu, J.
Xu, H.
Li, Y.
Ashraf, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/259119.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
propeller AUV
dynamic model
stability control
simulation
Opis:
Learning from the motion principle of quadrotor, a symmetric propeller AUV, which has small size and low velocity is designed. Compared with the AUV equipped with rudders, it has better maneuverability and manipulation at low velocity. According to the Newton-Euler method, the 6 DOF kinematic model and dynamic model of the propeller AUV are established. A stability controller that consists of 3 different PID controllers is designed. It makes the depth and attitude angle as trigger conditions, and the relevant controller is chosen in different moving process. The simulation experiments simulate ideal motion state and disturbed motion state, and experiments results show that the stability controller based on combined sections method can make the best of mature technology of PID, and meet the control requirements in different stages. It has a higher respond speed and accuracy, improving the stability of the propeller AUV under the disturbance of complex ocean currents.
Źródło:
Polish Maritime Research; 2015, S 1; 157-162
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion Characteristics and Mechanism of Boron-based, Fuel-rich Propellants with Agglomerated Boron Powder
Autorzy:
Xu, H. -X.
Pang, W.-Q.
Guo, H.-W.
Zhao, F.-Q.
Wang, Y.
Sun, Z.-H.
Powiązania:
https://bibliotekanauki.pl/articles/358733.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
analytical chemistry
boron-based fuel-rich solid propellants
agglomerated boron powder
combustion performance
combustion mechanism
Opis:
In order to extend the burning rate of boron-based, fuel-rich solid propellants with agglomerated boron powder, the effects of the boron content, the AP content, and of the magnesium powder content, on the burning rate and pressure exponent have been studied systematically. It has been shown that when the AP content is constant, the burning rate of the propellants increases with an increase in the agglomerated boron content. Furthermore, the burning rate and pressure exponent increase with increasing the contents of AP and magnesium powder. By means of single colour frame amplification photography and combustion wave tests, the combustion mechanism of these propellants has been investigated. It has been shown that the flame of the propellants becomes brighter by increasing the AP content, the dT/dxcp and dT/dxgp of the propellant FR-5 being around 6815 and 5789 °C/mm respectively, higher than those of FR-4, resulting in greater burning rates. The Ts of these propellants is above 683 °C, which is higher than the decomposition peak temperatures of agglomerated boron powder and of propellants (about 649 °C), which indicates that agglomerated boron powder is partially oxidized on the combustion surface, and the heat released from it may be beneficial to the combustion of the propellants.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 4; 575-587
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of injection pressure and strategy in a Jaguar V6 diesel engine
Autorzy:
Abdullah, N. R.
Mamat, R.
Rounce, P.
Wyszynski, M. L.
Tsolakis, A.
Xu, H. M.
Tian, G.
Powiązania:
https://bibliotekanauki.pl/articles/242414.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion
emissions
injection strategies
premixed combustion
ignition delay
Opis:
In recent years, the improvement of engine performance and emissions has become an extremely important concern. This study focuses on the injection strategy based on the injection pressure (IP) and duration between pilot injection and the main injection (dMI) using a multi cylinder common rail multiple injections diesel engine. The study was designed to produce improvements in fuel mixing via the injection strategy, to reduce the main ignition delay. This would contribute to a minimum amount of fuel burnt in the premixed combustion phase, leading to a reduction in emissions. Recent evidence shows that premixed combustion is significant in the controlling of emissions of nitrogen oxides (NOx) and soot. Six different IPs combined with a short and long dMI were compared in the attempt to improve engine performance and emissions. The engine performance was measured in terms of brake specific fuel consumption, ignition delay, heat release and peak in-cylinder pressure and emissions, specifically nitrogen oxides (NOx), total unburned hydrocarbons (THC), carbon monoxide (CO) and smoke emissions for each engine test condition. The evidence from this study shows that the effect of IP is more dominant than dMI in terms of peak cylinder pressure, heat release, brake specific fuel consumption and emissions. However, the dMI shows a strong effect at a higher engine speed.
Źródło:
Journal of KONES; 2009, 16, 2; 9-22
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation into particulate size distributions in the exhaust gas of diesel engines fuelled with biodiesel blends
Autorzy:
Chuepeng, S.
Theinnoi, K.
Xu, H. M.
Wyszynski, M. L.
York, A. P. E.
Hartland, J. C.
Qiao, J.
Powiązania:
https://bibliotekanauki.pl/articles/248072.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
biodiesel
PM
combustion
diesel
PM size distribution
Opis:
Particulate matter (PM) size distributions in the exhaust gas of biodiesel blend fuelled diesel engines have been studied by experimenting firstly on a single cylinder equipped with a pump-line-injector injection system and secondly for comparison on a V6 DI engine equipped with a common rail fuel injection system. Both engines were operated with a biodiesel (RME) blend of B30 and ultra low sulphur diesel fuel (ULSD). Several engine load conditions with and without exhaust gas recirculation (EGR) were selected. Particulate number concentrations vs. the electrical mobility equivalent diameter were examined using a fast differential mobility spectrometer. The effect of engine operating conditions including EGR rates on particulate emissions has been investigated. It is found that PM sizes from combustion of B30 without EGR operation are generally smaller than those from ULSD while number concentrations are higher. This can result in lower PM mass estimates for the B30 case if due care is not taken. When EGR is applied to control nitrogen oxides emissions, both the total PM number and mass are increased and shifted toward the larger sizes for both fuels used in the test. The calculated total PM mass from B30 combustion is lower than in the ULSD case for all the tested engine operating conditions.
Źródło:
Journal of KONES; 2008, 15, 3; 75-82
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of a High Energy Combustion Agent (BHN) and Its Effects on the Combustion Properties of Fuel Rich Solid Rocket Propellants
Autorzy:
Pang, W.-Q.
Zhao, F.-Q.
Xue, Y.-N.
Xu, H.-X.
Fan, X.-Z.
Xie, W.-X.
Zhang, W.
Lv, J.
Deluca, L. T.
Powiązania:
https://bibliotekanauki.pl/articles/358474.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
fuel rich solid propellant
BHN
DSC
TG-DTG
burning rate
combustion properties
Opis:
A high energy combustion agent (tetraethylammonium decahydrodecaborate, BHN) was prepared by means of an ion exchange reaction (IER), and the prepared samples were characterized by the advanced diagnostic techniques of Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC) etc. The effects of BHN particles on the hazard and combustion properties of fuel rich solid propellants were investigated. The results showed that the BHN samples and fuel rich propellants containing BHN particles can be prepared successfully and solidified safely. The peak temperature of thermal decomposition and the heat of decomposition of the BHN samples prepared were 305.8 °C and 210.9 J•g-1 at a heating rate of 10 K•min-1, respectively. The burning rate and pressure exponent of fuel rich solid propellants decreases with increases in the fraction of BHN particles in the propellant formulation. Compared with the reference formulation (sample BP-1), the burning rate of the propellant with 10% mass fraction of BHN particles (sample BP-4) had decreased 30% at 3.0 MPa, and the pressure exponent had dropped from 0.44 to 0.41.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 3; 537-552
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Intervalley Transfer of Electrons in ZnS-Type Thin Film Electroluminescent Devices
Autorzy:
Zhao, H.
Wang, Y.
Xu, Z.
Xu, X.
Powiązania:
https://bibliotekanauki.pl/articles/2011094.pdf
Data publikacji:
1999-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.20.-i
78.60.-b
Opis:
Based on the calculation about intervalley scattering rates in ZnS, the intervalley transfer process in ZnS-type thin film electroluminescent devices is investigated through the Monte Carlo simulation. The transient time of intervalley transfer is about 0.2-0.3 ps, it coincides with that of electron average energy. Intervalley distribution shifts to high valleys as the electric field increased. The electron kinetic energy distributions in different valleys are also gained. We propose that high valleys could store energies, which could prolong the decay of the electron average energy as the field was removed. These results could be used as the basic data on the study of electroluminescent process and the citation of valley parameters in analytic models should be carefully considered.
Źródło:
Acta Physica Polonica A; 1999, 96, 3-4; 475-482
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical Band Model in Monte Carlo Simulation of Electric Transport in ZnS Thin Film Electroluminescent Devices
Autorzy:
Zhao, H.
Wang, Y.
Xu, X.
Powiązania:
https://bibliotekanauki.pl/articles/2014087.pdf
Data publikacji:
2000-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.60.-b
72.20.-i
Opis:
In this paper, an analytical band model is introduced in Monte Carlo simulation of electric transport process in thin film electroluminescent devices. The band structure of ZnS calculated from the empirical pseudopotential method is fitted by using polynomials. The density of states and scattering rates are also calculated from these polynomials. Based on these results, the electric transport process in ZnS-type thin film electroluminescent devices is simulated through the Monte Carlo method. By comparison with others, this model is as fast as the nonparabolic model and as accurate as the full band model. Furthermore, the influence of the band model on the simulation results is also investigated. We show that the dispersion relation and density of states are all important in the simulation.
Źródło:
Acta Physica Polonica A; 2000, 98, 1-2; 123-130
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A reliability analysis method of cloud theory – Monte Carlo based on performance degradation data
Oparta na teorii chmury i modelu Monte Carlo metoda analizy niezawodnościowej danych o obniżeniu charakterystyk
Autorzy:
Yang, H.
Xu, G.
Fan, X.
Powiązania:
https://bibliotekanauki.pl/articles/301128.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
performance degradation
Cloud theory
Monte Carlo method
randomness
fuzziness
obniżenie charakterystyk
teoria chmury
metoda Monte Carlo
losowość
rozmycie
Opis:
Owing to inadequate degradation data, the randomness and the fuzziness of degradation processes, it is difficult to calculate the reliability of product. By investigating performance reliability using degradation data of performance, the authors proposed a method of analyzing reliability of performance degradation data using Monte Carlo principle and cloud theory. First of all, the performance degradation cloud with the degradation amount and the entropy which denotes the possible discrete degree of the degradation data, is generated by using performance degradation data and a cloud theory forward cloud generator. Then, the minimum membership threshold of cloud droplets and the threshold of product failure were set. Meanwhile, the number of cloud droplets that comply with the minimum membership degree and the failure threshold were counted. Finally, the reliability method of performance degradation data was proposed by using the principle of Monte Carlo and the cloud theory. In this work, the cloud theory was introduced to verify the reliability of the performance degradation of the product. The randomness and the fuzziness in the degradation tests are resolved. In addition, due to the limits of degradation test data, the difficulties in calculation of the reliability is resolved using the principle of Monte Carlo, the minimum membership of cloud droplets and its minimum degree are therefore guaranteed. This work provides a new method of simulating the reliability of degradation. The feasibility of the method was validated by an example ensuring a high durability of conveyor belt joints is tantamount to guaranteeing their reliable operation and that the results of research conducted so far fail to provide unambiguous solutions to a number of problems that emerge in this case, it is advisable that advanced studies using computer techniques should be conducted within this area.
Ze względu na niewystarczające dane o degradacji oraz losowość i rozmycie procesów degradacji, obliczanie niezawodności produktu jest zadaniem trudnym. Chcąc badać niezawodność przy użyciu danych dotyczących obniżenia charakterystyk, autorzy zaproponowali metodę analizy danych o obniżeniu charakterystyk wykorzystującą zasady metody Monte Carlo oraz teorii chmury. Po pierwsze, wykorzystując dane o obniżeniu charakterystyk oraz progresywny generator chmur, wygenerowano chmurę obniżenia charakterystyk zawierającą dane na temat stopnia degradacji oraz stopnia entropii, która określa możliwy dyskretny stopień degradacji danych. Następnie, ustalono minimalny próg przynależności punktów chmury oraz próg uszkodzenia produktu. Policzono liczbę punktów chmury które spełniały warunek minimalnego stopnia przynależności oraz progu uszkodzenia. Wreszcie, zaproponowano metodę analizy niezawodnościowej danych o obniżeniu charakterystyk wykorzystującą zasady modelu Monte Carlo oraz teorii chmury. W pracy przedstawiono teorię chmury, która pozwala na weryfikację niezawodności danych of obniżeniu charakterystyk produktu. Rozwiązano w ten sposób problem losowości i rozmycia występujące w badaniach degradacji. Ponadto, przy użyciu metody Monte Carlo, rozwiązano trudności w obliczaniu niezawodności związane z ograniczeniami danych z badań degradacji, co zagwarantowało minimalną przynależność punktów chmury oraz minimalny stopień uszkodzenia. W prezentowanej pracy przedstawiono nową metodę symulacji niezawodności danych o degradacji. Poprawność przedstawionej metody zweryfikowano na podstawie przykładu. Zapewnienie wysokiej trwałości złączy taśmy przenośnikowej jest równoznaczne z zapewnieniem ich niezawodnej pracy, a ponieważ wyniki prowadzonych dotąd badań nie dostarczają jednoznacznych rozwiązań wielu wyłaniających się w tym przypadku problemów, wskazane jest prowadzenie w tym zakresie zaawansowanych badań z użyciem technik komputerowych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 435-442
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of evaluation system of coastline resource in Dafeng
Autorzy:
Chen, M.
Xu, C.
Chen, H.
Powiązania:
https://bibliotekanauki.pl/articles/259978.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
coastline
Analytic Hierarchy Process
evaluation system
Opis:
Coastline is one type of valuable non-renewable resources. From the perspective of economic theory, it can gather population, promote traffic construction, and then improve the level of international trade. The research object of this paper is the coastline resource in Dafeng area. Firstly, we have a brief summary of the existing coastline evaluation literature, then introduce the location and natural attributes of the coastline resources in Dafeng. Following that, the Analytic Hierarchy Process (AHP) model is used to build the economic evaluation index system based on the characteristics of coastline in Dafeng. Specially, this index system consists of 6 factors, and a total of 41 detailed indicators were chosen including water depth, GDP, etc. On this basis, we use the assignment method to quantify the weight of each index, and calculate the comprehensive score of coastline resource by using the YAAHP software. The final conclusion is as follows: The total score of economic evaluation of coastline resource in Dafeng is 0.87. Therefore, the coastline resource in Dafeng will eventually be constructed a unique coastal economic zone, where the implemented port industrial projects will include shipbuilding, logistics, mechanical processing etc.
Źródło:
Polish Maritime Research; 2017, S 2; 181-187
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antibiofilm activity against Staphylococcus aureus and content analysis of Taraxacum Officinale phenolic extract
Autorzy:
Xu, P.
Xu, X.B.
Khan, A.
Fotina, T.
Wang, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/2087162.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Taraxacum Officinale
phenolic
antibacterial mechanism
HPLC
Staphylococcus aureus
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 2; 243-251
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of organohalogens in foodstuffs and environmental samples by neutron activation analysis and related techniques
Autorzy:
Xu, D.
Chai, Z.
Zhang, H.
Mao, X.
Ouyang, H.
Sun, H.
Powiązania:
https://bibliotekanauki.pl/articles/147259.pdf
Data publikacji:
2004
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
instrumental neutron activation analysis (INAA)
pine needle
foodstuff
extractable organohalogen
Opis:
Pine needles and foodstuffs collected from Beijing, China, were analyzed by instrumental neutron activation analysis (INAA) combined with organic solvent extraction for total halogens, extractable organohalogens (EOX) and extractable persistent organohalogens (EPOX). The INAA detection limits are 50 ng, 8 ng and 3.5 ng for Cl, Br and I, respectively. The contents and distribution patterns of organohalogens in these samples are reported. EOCl accounted for 0.013 0.016% and 1.6 2.7% of the total chlorine in yogurt and apples, respectively, which suggested that chlorine in foodstuffs mainly existed as inorganic species and non-extractable organochlorines. EOCl contents in pine needles and foodstuffs were noticeably higher than those of EOBr and EOI. For pine needles, yogurt and apples, 1.6 34%, 23 58% and 29 35% of EOCl remained as extractable persistent organochlorine (EPOCl), respectively. Pine needle containing higher EOCl contents in chemical industrial and traffic hub areas indicated that chemical industries and exhaust emission from vehicle were the main sources of organochlorines in the Beijing's air. The relative proportions of the known organochlorines (such as HCHs, DDTs, chlordanes, heptachlor, HCB and PCBs) to the total EOCl and EPOCl were 0.04 1.6% and 0.7 21.5%, respectively, which implied that the identity of species of a major portion of the EOCl and EPOCl measured in pine needles was unknown.
Źródło:
Nukleonika; 2004, 49, 3; 101-106
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Properties of ZnO Nanowires Doped with Magnesium
Autorzy:
Zhuang, H.
Wang, J.
Liu, H.
Li, J.
Xu, P.
Powiązania:
https://bibliotekanauki.pl/articles/1505046.pdf
Data publikacji:
2011-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.Km
61.72.uj
81.15.Gh
78.67.-n
Opis:
ZnO nanowires doped with Mg have been successfully prepared on Au-coated Si (111) substrates using chemical vapor deposition method with a mixture of ZnO, Mg, and activated carbon powders as reactants at 850°C. The structural, compositional, morphological and optical properties of the samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, and photoluminescence spectroscopy. The nanowires are single crystalline in nature and preferentially grow up along [0001] direction with the average diameter and length of about 60 nm and several hundred micrometers, respectively, thinner and longer than the results of literature using the similar method. Room temperature photoluminescence spectroscopy shows a blueshift from the bulk band gap emission, which can be attributed to Mg doping that were detected by energy dispersive X-ray analysis EDX in the nanowires. Finally, the possible growth mechanism of crystalline ZnO nanowires is discussed briefly.
Źródło:
Acta Physica Polonica A; 2011, 119, 6; 819-823
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of boron on ZSM-5 catalyst for methanol to propylene conversion
Autorzy:
Xu, A.
Ma, H.
Zhang, H.
Ying, W.
Fang, D.
Powiązania:
https://bibliotekanauki.pl/articles/777971.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
methanol to propylene
ZSM-5
boron modifi cation
propylene
Opis:
B-ZSM-5 catalysts were prepared by various modification methods with boric acid, including ion-exchange, impregnation and direct synthesis. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), NH3-Temperature Programmed Desorption (NH3-TPD), N2 adsorption-desorption, Fourier Transform Infrared spectrometry (FT-IR), 27Al and 11B MAS NMR spectra. The results revealed that the weak acidity of catalysts was significantly increased by modification. The catalytic activity was measured in a fixed bed at 460°C for methanol to propylene (MTP) reaction. The results of MTP reaction showed a great increment of the propylene selectivity for the boron modified samples, especially for the directly synthesized B-ZSM-5 which also displayed high activity and selectivity towards C2 =-C4 = olefins. It was found that the remarkable selectivity strongly depended on the intensity of weak acidity.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 4; 95-101
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A criticality importance-based spare ordering policy for multi-component degraded systems
Oparta na kryterium krytyczności polityka zamawiania części zamiennych do zdegradowanych systemów wieloelementowych
Autorzy:
Wang, C.
Xu, J.
Wang, H.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/301866.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
multi-component
spare ordering
criticality importance
random lead time
reliability threshold
system wieloelementowy
zamawianie części zamiennych
krytyczność
losowy czas realizacji procesu produkcyjnego
próg niezawodności
Opis:
With the increasing complexity and variety of production systems, more attention is being paid to preventive replacement on multicomponent systems. Each component is non-identical and has its own degradation process. In this paper, we propose a criticality importance-based spare ordering policy for a complex system, which consists of multiple series-parallel degrading components. Replacement action is triggered whenever the system reliability drops below a lower threshold and spares for replacement are available. Our policy mainly consists of two steps: (1) determine which components to be replaced; (2) determine when to order spares for components selected. In step 1, when the replacement action is triggered, we select components that most need to be replaced within the system in accordance with the optimum ranking of components until the system meets an upper reliability threshold. In step 2, a spare ordering policy for components selected is made and the optimal spare ordering time is obtained by minimizing the expected replacement cost during the once replacement cycle. Finally, a numerical example is given to illustrate the proposed multi-spare ordering policy. Moreover, the proposed policy is of significance for safety-critical systems such as substation automation system, bridge system, nuclear power plants and aerospace equipment.
Wraz ze wzrostem złożoności i różnorodności systemów produkcyjnych, coraz większą uwagę zwraca się na wymianę zapobiegawczą w systemach wieloelementowych. Każdy element takiego systemu jest nieidentyczny z pozostałymi elementami i charakteryzuje się własnym procesem degradacji. W niniejszym artykule proponujemy strategię zamawiania elementów zamiennych dla systemu złożonego składającego się z wielu ulegających degradacji komponentów tworzących strukturę szeregowo-równoległą. Omawiana strategia wymiany opiera się na kryterium krytyczności elementów. Akcja wymiany uruchamiana jest za każdym razem, gdy niezawodność systemu spada poniżej dolnego progu i dostępne są części zamienne. Na proponowaną strategię składają się zasadniczo dwa etapy: (1) określenie elementów wymagających wymiany oraz (2) określenie terminu zamówienia części zamiennych do wybranych elementów. W 1. etapie, po uruchomieniu akcji wymiany, wybiera się komponenty systemu, które najpilniej wymagają wymiany, kierując się optymalnym rankingiem komponentów, do momentu aż system osiągnie górny próg niezawodności. W 2 etapie, opracowuje się politykę zamawiania części zamiennych dla wybranych komponentów oraz określa się optymalny czas zamawiania części zamiennych poprzez minimalizację oczekiwanego kosztu wymiany podczas jednego cyklu wymiany. W artykule przedstawiono przykład numeryczny, który ilustruje proponowaną strategię jednoczesnego zamawiania wielu części zamiennych. Proponowana strategia może znaleźć zastosowanie w systemach o kluczowym znaczeniu dla bezpieczeństwa, takich jak systemy automatyki podstacji, systemy mostowe, elektrownie jądrowe i sprzęt lotniczy.
Źródło:
Eksploatacja i Niezawodność; 2018, 20, 4; 662-670
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Double tunneling induced transparency in the asymmetry quantum dot molecules
Autorzy:
Yu, C.
Huang, H.
Zhang, L.
Xu, D.
Powiązania:
https://bibliotekanauki.pl/articles/173599.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quantum dot molecule
slow light
tunneling induced transparency
Opis:
Using the density matrix theory, we have studied the double tunneling induced transparency slow light in the double asymmetry quantum dot molecules. With applied electric field, double tunneling induced transparency occur in the same time. Four absorption peaks are found near the resonance energy level in the absorption spectrum and the absorption peak can be tuned by the applied electric field. The velocity and bandwidth of the multiple-windows slow light can also be controlled by the applied electric field. In our model, with Te =0.1meV, we can get about 0.001c and 20GHz bandwidth in each transparency window. Such a property may be applied in all optical buffers, optical switching and filter.
Źródło:
Optica Applicata; 2016, 46, 3; 473-481
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extended Lie algebraic stability analysis for switched systems with continuous-time and discrete–time subsystems
Autorzy:
Zhai, G.
Xu, X.
Lin, H.
Liu, D.
Powiązania:
https://bibliotekanauki.pl/articles/929816.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
układ komutowany
funkcja Lapunowa
algebra Lie'go
stateczność wykładnicza
switched systems
common quadratic Lyapunov functions
Lie algebra
exponential stability
arbitrary switching
dwell time scheme
Opis:
We analyze stability for switched systems which are composed of both continuous-time and discrete-time subsystems. By considering a Lie algebra generated by all subsystem matrices, we show that if all subsystems are Hurwitz/Schur stable and this Lie algebra is solvable, then there is a common quadratic Lyapunov function for all subsystems and thus the switched system is exponentially stable under arbitrary switching. When not all subsystems are stable and the same Lie algebra is solvable, we show that there is a common quadratic Lyapunov-like function for all subsystems and the switched system is exponentially stable under a dwell time scheme. Two numerical examples are provided to demonstrate the result.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2007, 17, 4; 447-454
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of PolyNIMMO-HTPB-polyNIMMO Triblock Copolymer as a Potential Energetic Binder
Autorzy:
Wang, X.
Shu, Y.
Lu, X.
Mo, H.
Xu, M.
Powiązania:
https://bibliotekanauki.pl/articles/358529.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
triblock copolymer
cationic ring opening polymerization
polymer
DSC
Opis:
Triblock copolymer polyNIMMO-HTPB-polyNIMMO was synthesized by cationic ring opening polymerization of NIMMO (3-nitratomethyl-3-methyloxetane) in the presence of hydroxyl-terminated polybutadiene catalyzed by BF3·OEt2. The polymer was characterized by FT-IR, 1H NMR, 13C NMR spectroscopy, and GPC. DSC was used to investigate the thermal behaviour of the triblock copolymer and its exothermic decomposition peak was found to be at 215 °C. All of the results indicated that the triblock copolymer polyNIMMO-HTPB-polyNIMMO might serve as a potential energetic propellant binder.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 3; 456-467
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Jiyuan tetrapod fauna of the Upper Permian of China: new pareiasaur material and the reestablishment of Honania complicidentata
Autorzy:
Xu, L.
Li, X.-W.
Jia, S.-H.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/22012.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
Honania complicidentata and Tsiyuania simplicidentata are pareiasaur taxa based on material from the Shangshihezi Formation of Jiyuan, Henan Province, China that were earlier designated as nomina vana. Based on the study of new material, and the reexamination of old specimens, we determine that the pareiasaur material from Jiyuan represents a single species that differs from all known species from other localities. Thus, we resurrect the name H. complicidentata for the material from Jiyuan. H. complicidentata is characterized by maxillary teeth with high crowns, dentary teeth slightly posteriorly inclined compared to the dentary dorsal margin, nearly all preserved marginal teeth have a cusped cingulum on the lingual surface, and humerus without an ectepicondylar foramen. Phylogenetic analysis shows Honania is more basal than Shansisaurus and Shihtienfenia from the Sunjiagou Formation of China.
Źródło:
Acta Palaeontologica Polonica; 2015, 60, 3
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Influence of Silicon Content and Oxygen Concentration on the Oxidation Process of Silicon-Containing Steels
Autorzy:
Yuan, Q.
Xu, G.
Zhou, M.
He, B.
Hu, H.
Powiązania:
https://bibliotekanauki.pl/articles/352126.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicone content
oxygen concentration
mass gain
isothermal holding time
Opis:
The combined influence of silicon content and oxygen concentration on silicon-containing steels was investigated, via a heating route similar to that applied in the industrial reheating process, using a Simultaneous Thermal Analyzer (STA). Four different oxygen concentrations and three different isothermal holding times were designed. The results show that the effect of silicon on the mass gain depends on the oxygen concentration and the oxidation time. The mass gain of low-silicon steel is greater than that of high-silicon steel at 1260°C in the oxygen concentrations of 1.0 vol.% and 2.0 vol.%, even when the isothermal holding time is 90 minutes. However, there is a critical time point for mass gain in oxygen concentrations ≥3.0 vol.%. The mass gain of lowsilicon steel is greater before and smaller after this critical point. The critical time is deferred with decreasing oxygen concentration.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 445-450
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mirror surface finishing of hardened die steel by high-Power ultrasonic elliptical vibration cutting
Autorzy:
Jung, H.
Shamoto, E.
Ueyama, T.
Hamada, S.
Xu, L.
Powiązania:
https://bibliotekanauki.pl/articles/100101.pdf
Data publikacji:
2016
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
elliptical vibration cutting
mirror surface finishing
hardened steel
Opis:
Ultrasonic elliptical vibration cutting has recently been utilized in industry for finishing of various precision parts such as mirror surface finishing and precision micro machining of dies and molds. However, its application has been limited to high-cost ultra-precision machining, where depth of cut is typically in a range from a few micrometers to several tens of micrometers due to power limitation of the vibration device. To expand its application to low-cost mirror surface finishing with ordinary machining facilities, a high-power elliptical vibration device was developed in this research. The elliptical vibration cutting of hardened die steel was examined by applying the developed high-power elliptical vibration device with single crystalline diamond tools. Pick feed was kept to be 0.02 mm to obtain mirror quality surfaces, while depth of cut was increased up to 0.4 mm to verify performance of the high-power elliptical vibration cutting. By analyzing the experimental results, it was clarified that mirror surface finishing of the hardened die steel can be achieved at the large depth of cut with practically acceptable tool life.
Źródło:
Journal of Machine Engineering; 2016, 16, 1; 5-14
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on electric spring control method considering noncritical load voltage constraint
Autorzy:
Chen, Y.
Ma, G.
Xu, U.
Zhang, H.
Ju, R.
Powiązania:
https://bibliotekanauki.pl/articles/140516.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric spring
noncritical load
voltage excursion
reactive power compensation
Opis:
With the increasing penetration rate of grid-connected renewable energy generation, the problem of grid voltage excursion becomes an important issue that needs to be solved urgently. As a new type of voltage regulation control method, electric spring (ES) can alleviate the fluctuations of renewable energy output effectively. In this paper, the background and basic principle of the electric spring are introduced firstly. Then, considering the influence of an electric spring on noncritical load voltage, noncritical loads are classified reasonably, and based on the electric spring phasor diagram, the control method to meet the noncritical load voltage constraint is proposed. This control method can meet the requirements of voltage excursions of different kinds of noncritical load, increase the connection capacity of the noncritical load and improve the voltage stabilization capacity of the electric spring. Finally, through the simulation case, the feasibility and validity of electric spring theory and the proposed control method are verified.
Źródło:
Archives of Electrical Engineering; 2018, 67, 4; 709-724
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polarization dependence of patterning effects in quantum well semiconductor optical amplifier-based wavelength conversion
Autorzy:
Qin, C
Shen, W
Zhao, J.
Yu, H.
Xu, E
Powiązania:
https://bibliotekanauki.pl/articles/173469.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
semiconductor optical amplifiers
polarization
patterning effect
Opis:
In this paper, polarization dependence of patterning effects in quantum well semiconductor optical amplifier-based wavelength conversion is experimentally and theoretically investigated. The carrier and photon density rate equations are numerically solved by using the time-domain traveling wave model. The material gain calculation, including the strain effect in the active layer, is based on the k·p method. By comparing experimental and computational results, it is demonstrated that the polarization of the injection signal has a significant influence on the gain recovery time of quantum well semiconductor optical amplifier. Under the cross-polarized signals injection, the output signals suffer the weakest and strongest patterning effects both for unstrained and tensile strained quantum well semiconductor optical amplifiers.
Źródło:
Optica Applicata; 2015, 45, 2; 163-172
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonal patterns and environmental drivers of nirS- and nirK-encoding denitrifiers in sediments of Daya Bay, China
Autorzy:
Shi, R.
Xu, S.
Qi, Z.
Huang, H.
Liang, Q.
Powiązania:
https://bibliotekanauki.pl/articles/958171.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
seasonal pattern
environmental factor
denitrifier
community structure
nirS-encoding
nirK-encoding
sediment
chemical characteristics
physiological characteristics
Daya Bay
China
Źródło:
Oceanologia; 2019, 61, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of mechanical properties of recycled coarse aggregate concrete
Badania właściwości mechanicznych betonu kruszywowego wtórnego wykonanego z użyciem kruszywa gruboziarnistego także pochodzenia wtórnego
Autorzy:
Deng, X. H.
Lu, Z. L.
Li, P.
Xu, T.
Powiązania:
https://bibliotekanauki.pl/articles/962346.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton
kruszywo gruboziarniste
kruszywo z recyklingu
stosunek wodno-cementowy
wskaźnik zamiany
wytrzymałość na ściskanie
wytrzymałość na rozciąganie
rozłupywanie
concrete
coarse aggregate
recycled aggregate
water-cement ratio
replacement rate
compression strength
tensile strength
splitting
Opis:
Recycling construction and demolition waste not only reduces project costs; and saves natural resources, but also solves the environmental threat caused by construction waste disposal. In this paper, C25 waste road concrete is used as an experimental material, the uniaxial compression strength and tensile splitting strength of C25 RAC whose coarse aggregate replacement rate is 0%, 25%, 50%, 75%, and 100% are tested under the condition that the water-to-cement ratio is 0.47, 0.55 and 0.61. The results show: (1) the uniaxial compression strength and tensile splitting strength decrease with the increase of RAC; (2) for concrete with the same water-to-cement ratio, when the coarse aggregate replacement rate changes from 0% to 50%, the uniaxial compression strength and tensile splitting strength of RAC changes slightly. When the coarse aggregate replacement rate changes from 50% to 100%, the uniaxial compression strength and tensile splitting strength of RAC decreases rapidly.
Recykling odpadów budowlanych oraz materiałów pochodzących z rozbiórek nie tylko zmniejsza koszty projektu i oszczędza zasoby naturalne, ale również zażegnuje zagrożenie dla środowiska spowodowane przez składowanie odpadów budowlanych. Szczególnie w odniesieniu do właściwości mechanicznych betonu z kruszywa gruboziarnistego poddanego recyklingowi, odpady betonu drogowego C25 są używane jako materiał eksperymentalny, pod warunkiem że stosunek wody do cementu wynosi 0,47, 0,55 i 0,61 oraz są przygotowane próbki betonu o wskaźniku zamiany betonu z kruszywa gruboziarnistego poddawanego recyklingowi wynoszącym 25%, 50%, 75% i 100% betonu z naturalnego kruszywa gruboziarnistego. Próbka to sześcian o wymiarach 150 × 150 × 150 mm. Przygotowaliśmy 6 próbek dla każdego wskaźnika zamiany betonu z kruszywa gruboziarnistego poddawanego recyklingowi. Przygotowano łącznie 90 próbek betonu. Próbki zostały usunięte 24 godziny po ustawieniu oraz były utwardzane w temperaturze 20°C i wilgotności 90% przez 28 dni. Następnie przeprowadzono próby ściskania jednoosiowego oraz wytrzymałości na rozciąganie przez rozłupywanie betonu z kruszywa poddawanego recyklingowi C25.
Źródło:
Archives of Civil Engineering; 2016, 62, 4/II; 19-34
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simplified Model for Predicting Fabric Thermal Resistance According to its Microstructural Parameters
Uproszczony model dla przewidywania oporu termicznego tkanin w zależności od ich parametrów mikrostruktury
Autorzy:
Wei, J.
Xu, S.
Liu, H.
Zheng, L.
Qian, Y.
Powiązania:
https://bibliotekanauki.pl/articles/233513.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
fabric model
thermal resistance
microstructure
correlation coefficient
model tkaniny
opór termiczny tkanin
mikrostruktura
współczynnik korelacji
Opis:
This paper presents a modified model to calculate the thermal resistance of woven and knitted fabrics according to the microstructural parameters. The model was established by analysing the heat transfer process in the simplified basic unit of the fabrics. The model was modified and checked by experimental values of various fabric samples. Pearson correlation coefficients between the thermal resistance and fabric structural parameters were calculated. Results indicate that fabric thermal resistance can be predicted by the modified equation satisfactorily. The Pearson correlation coefficient from high to low follows such a sequence: fabric thickness, fabric volume density, fabric structural parameter a, fibre volume density, and fibre thermal conductivity.
W artykule przedstawiono zmodyfikowany model pozwalający obliczyć opór termiczny tkanin i dzianin w zależności od parametrów ich mikrostruktury. Model został skonstruowany poprzez analizę procesu przepływu ciepła przez uproszczoną jednostkę płaskiego materiału włókienniczego. Model został sprawdzony w praktyce przez badanie różnych próbek tkanin i dzianin. Przy ocenie zastosowano porównanie współczynników korelacji Pearsona między oporem termicznym i parametrami strukturalnymi. Wyniki wskazują, że termiczną izolację płaskich materiałów włókienniczych można przewidzieć w zadowalającym stopniu przez zaproponowane zmodyfikowane równania. Współczynniki korelacji Pearsona począwszy od dużych do małych można uszeregować dla następujących parametrów: grubość tkaniny, gęstość właściwa tkaniny, parametry strukturalne, gęstość właściwa włókien i przewodność cieplna włókien.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 4 (112); 57-60
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Strain Rate on the Microstructure of Warm-Deformed Ultrafined Medium-Carbon Steel
Autorzy:
Yuan, Q.
Xu, G.
Liu, S.
Liu, M.
Hu, H.
Powiązania:
https://bibliotekanauki.pl/articles/355659.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
warm deformation
medium-carbon steel
ultrafine grain
strain rate
Fe3C
Opis:
In this study, medium-carbon steel was subjected to warm deformation experiments on a Gleeble 3500 thermosimulator machine at temperatures of 550°C and 650°C and strain rates of 0.001 s-1 to 1 s-1. The warm deformation behavior of martensite and the effects of strain rate on the microstructure of ultrafine grained medium-carbon steel were investigated. The precipitation behavior of Fe3C during deformation was analyzed and the results showed that recrystallization occurred at a low strain rate. The average ultrafine ferrite grains of 500 ± 58 nm were fabricated at 550°C and a strain rate of 0.001 s-1. In addition, the size of Fe3C particles in the ferrite grains did not show any apparent change, while that of the Fe3C particles at the grain boundaries was mainly affected by the deformation temperature. The size of Fe3C particles increased with the increasing deformation temperature, while the strain rate had no significant effect on Fe3C particles. Moreover, the grain size of recrystallized ferrite decreased with an increase in the strain rate. The effects of the strain rate on the grain size of recrystallized ferrite depended on the deformation temperature and the strain rate had a prominent effect on the grain size at 550°C deformation temperature. Finally, the deformation resistance apparently decreased at 550°C and strain rate of 1 s-1 due to the maximum adiabatic heating in the material.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 1805-1813
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis on electromechanical coupling vibration characteristics of in-wheel motor in electric vehicles considering air gap eccentricity
Autorzy:
Li, Y.
Wu, H.
Xu, X.
Cai, Y.
Sun, X.
Powiązania:
https://bibliotekanauki.pl/articles/200165.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
BLDC in-wheel motor
rotor eccentricity
unbalanced magnetic force
electric vehicle
electromechanical coupling vibrat
Opis:
The distortion of air gap magnetic field caused by the rotor eccentricity contributes to the electromechanical coupling vibration of the brushless DC (BLDC) permanent magnet in-wheel motor (PMIWM) in electric vehicles (EV). The comfort of the BLDC in-wheel motor drive (IWMD) EV is seriously affected. To deeply investigate the electromechanical coupling vibration of the PMIWM under air gap eccentricity, the PMIWM, tyre and road excitation are analyzed first. The influence of air gap eccentricity on air gap magnetic density is investigated. The coupling law of the air gap and the unbalanced magnetic force (UMF) is studied. The coupling characteristics of eccentricity rate, air gap magnetic density, UMF, phase current and vibration acceleration are verified on the test bench in the laboratory. The mechanism of the electro-mechanical coupling vibration of the BLDC PMIWM under air gap static eccentricity (SE), dynamic eccentricity (DE) and hybrid eccentricity (HE) is revealed. DE and HE deteriorate the vibration acceleration amplitude, which contributes the electromechanical coupling vibration of the PMIWM. The research results provide a solid foundation for the vibration and noise suppression of the PMIWM in distributed drive EV.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 5; 851-862
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Phyllosticta hostae causing Phyllosticta leaf spot on spider lily in China
Autorzy:
Yi, R.H.
Gan, L.J.
Chen, J.
Xu, X.L.
Powiązania:
https://bibliotekanauki.pl/articles/66837.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Phyllosticta hostae
leaf spot
plant disease
spider lily
Hymenocallis littoralis
tropical plant
herb
China
Opis:
Leaf spot disease on the spider lily [Hymenocallis littoralis (Jacq.) Salisb.] continues to cause serious problems in China. To confirm the pathogen, the pathogenicity of isolates from diseased leaves was tested according to Koch’s postulates. The isolates were tentatively identified using morphological characteristics and confirmation was done by phylogenetic analysis of the translation elongation factor 1-alpha gene (TEF1), the actin gene (ACT), and internal transcibed spacer (ITS) sequences using neighbor-joining (NJ), maximum parsimony (MP), and Bayesian inference (BI) methods. The pathogen was identified as Phyllosticta hostae. Molecular analysis indicated very little diversity in the TEF1, ACT, and ITS gene. This is the first report of P. hostae causing leaf spot disease on spider lily in China.
Źródło:
Journal of Plant Protection Research; 2015, 55, 4
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic analysis of embedded chains in mooring line for fish cage system
Autorzy:
Hou, H. M.
Dong, G. H.
Xu, T. J.
Zhao, Y. P.
Bi, C. W.
Powiązania:
https://bibliotekanauki.pl/articles/259892.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
embedded chains
soil resistance
parameter sensitivity
dynamic analysis
Opis:
Investigation of the embedded chains in soil starts to play an important role in understanding the structural performance of mooring system, when the embedded anchors will be employed to sustain large loads with the gradually growth of installation depth of offshore aquaculture farm. The aim of this study is to investigate the dynamic response of mooring line considering the influence of embedded chains in clay soil for net cage system. Lumped-mass method is used to establish the numerical model for evaluating the performance of mooring line with embedded chains. To validate the numerical model, comparisons of numerical results with the analytical formulas and the experimental data are conducted. A good agreement of the profile and the tension response is obtained. Then, the effect of embedded chains on the static and dynamic response of mooring line is evaluated, and the dynamic behavior of mooring system considering embedded chains for net cage system is investigated. The results indicate that the soil resistance on embedded chains should be included to predict the mooring line development and the load on the embedded anchors in the numerical simulations. An appropriate safety factor should be included if employing the simplified model Case C at the initial design phase. And the effect of embedded chains on the holding capacity of embedded anchors in single-point mooring system for single net cage cannot be negligible during the design and operation phases. Consequently, it is profound to take into account the interaction of embedded chains and soil for accurately predicting the reliability of mooring system for fish cage.
Źródło:
Polish Maritime Research; 2018, 4; 83-97
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Review and future perspectives on the integration characteristics for equine lentivirus in the host genome
Autorzy:
Yu, Y.-Y.
Xu, M.-S.
Liang, H.
Wang, H.-Y.
Yu, C.-Q.
Liu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/16647532.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
lentivirus
equine infectious anemia virus
integration
long interspersed elements
Opis:
Despite over 40 years of research on the human immunodeficiency virus type 1 (HIV-1) vaccine, we still lack a considerable progress. Equine infectious anemia virus (EIAV) is a lentivirus in the Retroviridae family, akin to HIV-1 in genome structure and antigenicity. EIA is an important infectious disease in equids, characterized by anemia, persistent infection, and repeated fevers. The EIAV attenuated vaccine in China is the only lentiviral vaccine used on a large scale. Elucidating the mechanism of waning and induction of protective immunity from this attenuated vaccine strain will provide a critical theoretical basis and reference point for vaccine research, particularly in the development of lentivirus vaccines, with far-reaching scientific value and social significance. In this paper, we summarize the information related to EIAV integration site selection, particularly for the Chinese EIAV attenuated vaccine strains on the equine genome. This may improve our mechanistic understanding of EIAV virulence reduction at the host genome level. The obtained data may help elucidate the biological characteristics of EIAV, particularly the Chinese attenuated EIAV vaccine strain, and provide valuable information regarding retroviral infections, particularly lentiviral infection and associated therapeutic vectors.
Źródło:
Polish Journal of Veterinary Sciences; 2023, 26, 1; 163-172
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the influence of the transducer and its coupling layer on round window stimulation
Autorzy:
Liu, H.
Xu, D.
Yang, J.
Yang, S.
Cheng, G.
Huang, X.
Powiązania:
https://bibliotekanauki.pl/articles/306655.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
słuch
stymulacja
przetwornik
RW
FEM
implantable middle ear hearing device
round window stimulation
transducer
coupling layer
finite element analysis
Opis:
Purpose: In this work, a finite element study is proposed to evaluate the effects of the transducer and its coupling layer on the performance of round window (RW) stimulation. Methods: Based on a set of micro-computer tomography images of a healthy adult’s right ear and reverse engineering technique, a coupled finite-element model of the human ear and the transducer was constructed and verified. Then, the effect of the cross-section of the transducer, the elastic modulus of the coupling layer, the mass of the transducer, and the preload of the transducer were studied. Results: The increase of the transducer’s cross-section area deteriorates the RW stimulation, especially at the lower frequencies. This adverse effect of the cross-section area’s increase of the transducer can be reduced by adding a coupling layer between the transducer and the RW. However, the coupling layer’s improvement on the RW stimulation is reduced with the increase of its elastic modulus. Moreover, the mass loading of the transducer decreases the RW stimulation’s performance mainly at higher frequencies and applying a static preload on the transducer enhances its hearing compensating performance at higher frequencies. Conclusions: The influence of the transducer’s mass, the mass of the transducer, the applied static preload and the properties of the coupling layer must be taken into account in the design of the RW stimulation type implantable middle ear hearing device.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 2; 103-111
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Mg and Ca on the Characteristics of Inclusions in Sulphur Steel
Autorzy:
Tian, J.
Qu, T.
Wang, D.
Wang, H.
Xu, Z.
Xinrui, E.
Powiązania:
https://bibliotekanauki.pl/articles/355348.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mg treatment
Ca treatment
MnS
complex sulfide
inclusions
Opis:
The effects of Mg and Ca on sulfide modification of sulphur steel were studied to elucidate the difference between micromagnesium treatment and micro-calcium treatment for the inclusion of sulphur steel. The results show that the inclusions in the steel appeared with an oxide core of Al2O3 and MnS wrapped. After the addition of Mg, the core was changed to spinel, and the MnS coating was changed to Mn-Mg-S. After Ca was added, the core was changed to Ca-Al-O, and the MnS coating was changed to Mn-Ca-S. The Mg content was higher than Ca content in the sulfides of the steel. Therefore, Mg was more effective than Ca in terms of sulfide modification with the same content of Mg and Ca in steel, but the yielding rate of Mg was lower than that of Ca. The Mg content in the oxide core was higher than Mg of the coating of the inclusions in the steel treated with Mg or Mg-Ca. In contrast, the Ca content in the oxide core was lower than Ca of the coating of the inclusions in the steel treated with Ca or Mg-Ca. MnS formed and precipitated during the melt solidification process. The complex sulfide (Mg-Mn-S) was precipitated around MgO·Al2O3 in the Mg treated steel during the cooling process. CaS inclusion was precipitated on the CaO·Al2O3 inclusions in the liquid Ca-treated steel. Thus, CaS was formed first, whereas MnS was formed during the cooling process, followed by the formation of complex sulfide (CaS+MnS), which finally precipitated around CaO·Al2O3 in the Ca-treated steel.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 1599-1607
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Truncated two-stage compound parabolic concentrator for collecting human diffuse transmission light
Autorzy:
Gao, J.
Han, G.
Lu, Q.
Ding, H.
Xu, J.
Sun, J.
Powiązania:
https://bibliotekanauki.pl/articles/174488.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical design
compound parabolic concentrator
CPC
non-imaging optics
near infrared spectroscopy
medicine optical instrument
Opis:
We propose an optical system employing a compound parabolic concentrator for near infrared spectroscope in noninvasive blood components testing. A truncated two-stage compound parabolic concentrator system is designed, which consists of a normal first-stage compound parabolic concentrator and a truncated second-stage compound parabolic concentrator. Using advanced ray tracing technique, the optical efficiencies of truncated two-stage compound parabolic concentrator system, ellipsoidal mirror system and non-optical-focusing mirror system are calculated to be 25.4%, 22.4% and 4.0%, respectively. Furthermore, the total length of truncated two-stage compound parabolic concentrator is only about 68 mm while the ellipsoidal mirror is 110 mm. It indicates that the truncated two-stage compound parabolic concentrator system enhances the ability of concentrating human diffuse transmission light, and it is a benefit to improve signal-to-noise ratio of noninvasive biochemical analysis system efficiently. Due to the advantage of small size, it tends to achieve a miniature instrument.
Źródło:
Optica Applicata; 2018, 48, 2; 325-335
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fruit biomechanics based on anatomy: a review
Autorzy:
Li, Z.
Yang, H.
Li, P.
Liu, J.
Wang, J.
Xu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/24093.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Fruit biomechanics is needed for quality determination, multiscale modelling and engineering design of fruit processes and equipments. However, these determined fruit biomechanics data often have obvious differences for the same fruit or tissue. In order to investigate it, the fruit biomechanics based on anatomy was reviewed in this paper. First, the anatomical characteristics of fruit biomaterials were described at the macroscopic ‘tissue’ level and microscopic ‘cellular’ level. Subsequently, the factors affecting fruit biomechanics based on anatomy and the relationships between fruit biomechanics, texture and mechanical damage were summarised according to the published literature. Fruit biomechanics is mainly affected by size, number and arrangement of cells, quantity and volume of intracellular spaces, structure, thickness, chemical composition and permeability of cell walls, and pectin degradation level and turgor pressure within cells based on microanatomy. Four test methods and partial determined results of fruit biomechanics were listed and reviewed. The determined mechanical properties data of fruit are only approximate values by using the existing four test methods, owing to the fruit biomaterials being non-homogeneous and living. Lastly, further aspects for research on fruit biomechanics were proposed for the future.
Źródło:
International Agrophysics; 2013, 27, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies of Negative Pressure and Cleaning Condition Effects on Gathering for Ramie Compact Spinning with a Suction Groove
Badanie podciśnienia i warunków czyszczenia na skupienie włókien ramii przy przędzeniu kompaktowym z rowkiem zasysającym
Autorzy:
Ma, H C
Cheng, L. D.
Yan, G X
Xu, S P
Powiązania:
https://bibliotekanauki.pl/articles/232971.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
suction groove
compact spinning
ramie
negative pressure
hairiness index
przędzenie kompaktowe
ramia
redukcja włochatości tkanin
Opis:
The application of the compact spinning technique with a suction groove could reduce the spinning triangle to a minimum and dramatically decrease the hairiness of ramie yarn. The change range of negative pressure was discussed when the hairiness index was reduced to a minimum for the best gathering effect. The relationship between the doffing time and hairiness index of compact yarn was studied. When the suction groove was not cleaned, the spinning times influenced the fibre number accumulated inside the suction groove. The cleaning suction groove made airflow run smoothly, and the gathering effect of fibres was basically unchanged; thus the hairiness index of yarn rarely fluctuated. For compact yarn compared with 100% 27.8 tex traditional ring-spun yarn, the 4 mm hairiness index and above decreases by more than 79.72%. The result shows that ramie compact spinning with a suction groove could gather edge fibres effectively and reduce harmful hairiness markedly.
Zastosowanie przędzenia kompaktowego z rowkiem zasysającym pomogło zredukować trójkąt przędący i w ten sposób intensywnie zmniejszyć włochatość otrzymywanych przędz. Ustalono zakres stosowania podciśnienia dla uzyskania najlepszego efektu. Kiedy rowek zasysający nie był czyszczony, czas przędzenia wpływał na ilość włókien akumulowanych wewnątrz tego rowka. Czyszczenie rowka zasysającego powoduje, że powietrze przepływa równomiernie i efekt skupienia włókien pozostawał niezmieniony dzięki czemu indeks włochatości przędzy zmieniał się w małym stopniu. Wyniki pokazały, że kompaktowe przędzenie ramii z zastosowaniem rowka zasysającego pozwala skutecznie gromadzić skrajne włókna i redukować włochatość.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 3 (105); 54-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermally Induced Polymorphic Transformation of Hexanitrohexaazaisowurtzitane (HNIW) Investigated by in-situ X-ray Powder Diffraction
Autorzy:
Liu, Y.
Li, S.
Wang, Z.
Xu, J.
Sun, J.
Huang, H.
Powiązania:
https://bibliotekanauki.pl/articles/358065.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HNIW
polymorphism
in situ X-ray diffraction
phase transition
heat stimulation
Opis:
The ε→γ phase transition of HNIW induced by heat was investigated with in situ X-ray powder diffraction (PXRD). The effects of purity, particle size, insensitive additives and the time of isothermal heat treatment on the phase transition were evaluated. It was found that the phase transition is irreversible with changes in temperature, and the two phases can coexist in a certain temperature range. Moreover, the initial phase transition temperature increases with increasing purity and decreasing particle size of HNIW, and thus with the approximate crystal density. The addition of graphite and paraffin wax to HNIW as insensitive additives leads to a decrease in the initial phase transition temperature, but the addition of TATB does not affect the initial phase transition temperature. Thus, TATB is a suitable insensitive additive. Moreover, at the critical temperature, the isothermal time determined the efficiency of the ε- to γ-phase transition. This work lays the foundations for the choice of molding technologies, performance test methods, ammunition storage options, as well as the manufacture of HNIW-based explosive formulations.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 1023-1037
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of Ultrafine HMX/TATB Explosive Co-crystals
Autorzy:
An, C.
Li, H.
Zhang, Y.
Ye, B.
Xu, C.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/358105.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HMX
TATB
ultrafine co-crystals
ball milling
mechanical sensitivity
Opis:
An explosive co-crystal of 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX) and 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) was prepared by the ball milling method. The raw materials and co-crystals were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Raman spectroscopy. Impact and friction sensitivity of the co-crystals were tested and analyzed. The results showed that the HMX/TATB co-crystals are spherical in shape and 100-300 nm in size. The co-crystals are different from anintimate mixture of HMX/TATB and they exhibit a new co-crystal structure. HMX/TATB co-crystals are formed by N-O···H hydrogen bonding between −NO2 (HMX) and −NH2 (TATB). The drop height of ultrafine HMX/TATB explosive co-crystals is 12.7 cm higher than that of ultrafine HMX, whilst the explosion probability of friction is 20% lower than that of ultrafine HMX. Ultrafine HMX/TATB explosive co-crystals are difficult to initiate under impact and friction conditions.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 4; 876-887
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Lifting Wavelet Domain Audio Watermarking Algorithm Based on the Statistical Characteristics of Sub-Band Coefficients
Autorzy:
Tao, Z.
Zhao, H.
Wu, J.
Gu, J.
Xu, Y.
Wu, D.
Powiązania:
https://bibliotekanauki.pl/articles/177956.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
audio watermarking
lifting wavelet transform
statistical characteristics
sub-band coefficients
Opis:
In this paper, a new lifting wavelet domain audio watermarking algorithm based on the statistical characteristics of sub-band coefficients is proposed. First of all, an original audio signal was segmented and each segment was divided into two sections. Then, the Barker code was used for synchronization, the LWT (lifting wavelet transform) was performed on each section, a synchronization code and a watermark were embedded into the first section and the second section, respectively, by modifying the statistical average value of the sub-band coefficients. The embed strength was determined adaptively according to the auditory masking property. Experiments show that the embedded watermark has better robustness against common signal processing attacks than present algorithms based on LWT and can resist random cropping in particular.
Źródło:
Archives of Acoustics; 2010, 35, 4; 481-491
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonal dynamics in cambial activity and the formation of xylem and phloem in the branches of Cinnamomum camphora
Autorzy:
Dong, M.
Xu, Y.M.
Lin, H.
Li, X.Q.
Xia, Q.Q.
Powiązania:
https://bibliotekanauki.pl/articles/41385.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
seasonal dynamics
cambial activity
formation
xylem
phloem
branch formation
tree
tropical tree
Cinnamomum camphora
wood formation
phenology
Opis:
The cambial activity and periodicity of secondary xylem and phloem formation have been less studied in tropical tree species than in temperate ones. Cambium activity is the only source of timber production. Studies on its activity and xylem formation can provide helpful data for dendrochronology and possible factors that control tree growth, the yield and quality of wood. Cinnamomum camphora is an important fast-growing tree for furniture and sculpture wood in South China. Its dynamics of cambial activity was not reported. During the growth season in 2011, five trees of Cinnamomum camphora plantation were monitored on the campus of Huazhong Agricultural University in central china (located on 113°41’ to 115°05’ E and 29°58’ to 31°22’ N). Sampling time was from 13, February 2011 to 13, February 2012. Some small stems of 15–20 cm length were selected to sample in the middle of 2–3 years old health branches in the central crown of these trees. The observational study found that the cambium of camphor trees was active from March to October and dormant from November to February. Onset of cambial cell division was observed in early March, one week after sprouting of new buds. The morphology of the cells and number of cell layers in the cambium zone varied throughout the year. In early March, cambium reactivated with the rising of temperature, the cell wall was relative thick. The number of cell layers increased from 2–3 in middle Feb. to 3–5. In June, the number of cell layers in cambium reached the maximum of 5–7 in a radial direction. In mid March, phloem cells began to differentiate, followed by xylem three weeks later. The number of cell layers in immature phloem and xylem increased dramatically before mid June and the increment of cell layers in xylem was almost fifth times of phloem in the differentiating process. The phloem cells mainly stopped dividing new cells in end of October, but xylem cells were still in the activity a week later. The annual activities of cambium was in accordance with the air mean temperature change in 2011–2012. The results showed that the cambial activity and formation of xylem and phloem were related to the environmental factors, especially the temperature.
Źródło:
Dendrobiology; 2016, 75
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of medicinal plant Schisandra chinensis using a potential DNA barcode ITS2
Autorzy:
Li, X.-K.
Wang, B.
Han, R.-C.
Zheng, Y.-C.
Yin, H.-B.
Xu, L.
Zhang, J.-K.
Xu, B.-L.
Powiązania:
https://bibliotekanauki.pl/articles/56996.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
identification
internal transcribed spacer
medicinal plant
Schisandra chinensis
DNA barcode
Opis:
To test whether the internal transcribed spacer 2 (ITS2) region is an effective marker for using in authenticating of the Schisandra chinensis at the species and population levels, separately. And the results showed that the wild populations had higher percentage of individuals that had substitution of C→A at site 86-bp than the cultivated populations. At sites 10-bp, 37-bp, 42-bp and 235-bp, these bases of the Schisandra sphenanthera samples differed from that of S. chinensis. Two species showed higher levels of inter-specific divergence than intra-specific divergence within ITS2 sequences. However, 24 populations did not demonstrate much difference as inter-specific and intra-specific divergences were concerned. Both S. chinensis and S. sphenanthera showed monophyly at species level, yet the samples of different populations shown polyphyly at population level. ITS2 performed well when using BLAST1 method. ITS2 obtained 100% identification success rates at the species level for S. chinensis, with no ambiguous identification at the genus level for ITS2 alone. The ITS2 region could be used to identify S. chinensis and S. sphenanthera in the “Chinese Pharmacopoeia”. And it could also correctly distinguish 100% of species and 100% of genera from the 193 sequences of S. chinensis. Hence, the ITS2 is a powerful and efficient tool for species identification of S. chinensis.
Źródło:
Acta Societatis Botanicorum Poloniae; 2013, 82, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the Mechanism and Kinetics of Polymorphic Transitions of ε CL-20 in Composite Systems
Autorzy:
Guo, X.-Y.
Zhang, P.
Xu, J.-J.
Wang, Z.-H.
Jiao, Q.-J.
Powiązania:
https://bibliotekanauki.pl/articles/358032.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
polymorphic transition
kinetics
activation energy
transition temperature
Opis:
In order to explore the polymorphic transition law for ε-CL-20 in composite systems, the polymorphic transition process of pure ε-CL-20 crystals stimulated by heat was investigated by the X-ray Diffraction (XRD) method, and the kinetic parameters of the polymorphic transition process were calculated (including the apparent activation energy Ea and the pre-exponential factor lnA). Meanwhile the effects of different additives on the polymorphic transition process and kinetics of ε-CL-20 were explored in detail. The experimental results showed that the ε-form tends to transform into the γ- form on heating and that the Ea and lnA for the transition process were 209.97 kJ/mol and 57.47, respectively. The first group of additives clearly promoted the polymorphic transition of ε-CL-20 and lowered the initial transition temperature and the activation energy. The second and third groups of additives inhibited the polymorphic transition of ε-CL-20 and raised the initial transition temperature and the activation energy.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 4; 689-702
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of flotation behavior and mechanism of cervantite activation by copper ions
Autorzy:
Wang, J.
Wang, Y.
Fu, K.
Xu, L.
Wang, Z.
Sun, H.
Xiao, J.
Powiązania:
https://bibliotekanauki.pl/articles/110228.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
cervantite
copper ions
activation mechanism
Opis:
Copper-ion activation plays a highly important role in cervantite (Sb2O4) flotation. Without metal-ion activation, cervantite cannot be floated by sodium oleate. In this study, flotation tests were conducted to study the effect of Cu2+ on the flotation behaviours of cervantite and quartz (SiO2) as the main gangue mineral. Metal-ion adsorption capacities, zeta potentials, solution chemistry and X-ray photoelectron spectra were analyzed to study the adsorption behavior and mechanism of copper ions and sodium oleate interaction with the minerals surfaces. The results demonstrate that under weakly acidic conditions, cervantite can be flotated and separated from quartz by the addition of copper ions. The reason is that copper ions can be selectively adsorbed on the cervantite surface under weakly acidic conditions, thereby promoting the adsorption of sodium oleate onto the cervantite surface by chemical adsorption. Conversely, copper ions are weakly adsorbed on quartz surfaces below pH 6.1, and sodium oleate cannot be adsorbed on quartz surfaces by chemical adsorption. The hydroxy copper species are integral to the selective activation of cervantite over quartz.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 814-825
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular cloning, expression, purification and osteoblasts proliferation activity of sika deer thymosin beta10
Autorzy:
Zhao, D.
Zhao, Y.
Zhang, H.
Xu, Z.
Liu, M.
Wang, J.
Bai, X.
Powiązania:
https://bibliotekanauki.pl/articles/2087874.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
affinity chromatography
cell proliferation
prokaryotic expression
sika deer
thymosin 10
Źródło:
Polish Journal of Veterinary Sciences; 2017, 4; 751-758
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis of machining center based on the field data
Analiza niezawodnościowa centrum obróbkowego w oparciu o dane terenowe
Autorzy:
Yang, Z. J.
Chen, Ch. H.
Chen, F.
Hao, Q. B.
Xu, B. B.
Powiązania:
https://bibliotekanauki.pl/articles/302160.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
analiza uszkodzeń
centrum obróbkowe
polityka utrzymania ruchu
proces spełniający prawo potęgowe
system naprawialny
failure analysis
machining center
maintenance policy
power-law process
repairable system
Opis:
Machining center is the complex machinery, with high level automation and complicated structures, so there are lots of failures. When a random failure occurs, the failed machining center stops and causes a production line or even the whole workshop to stop functioning. The frequent failure leads to the low levels of reliability and production rate. In order to help users and manufacturers optimize maintenance policy to improve the reliability for machining center, this paper presents descriptive statistics of the failure data and develops the failure trend using power-law process, simultaneously establishes the routine inspection and regular inspection as well as the sequential preventive maintenance under maintenance cost constraints. The proposed model could be a useful tool to assess the current conditions, predict reliability and optimize the machining center maintenance policy.
Centrum obróbkowe to skomplikowany mechanizm o wysokim poziomie automatyzacji oraz złożonej konstrukcji, w związku z czym ulega licznym uszkodzeniom. Przy wystąpieniu przypadkowej awarii, uszkodzone centrum obróbkowe przestaje działać i powoduje zatrzymanie linii produkcyjnej a nawet całego oddziału produkcyjnego. Częste awarie obniżają poziom niezawodności oraz tempo produkcji. Aby pomóc użytkownikom i producentom zoptymalizować politykę utrzymania ruchu w celu poprawy niezawodności centrów obróbkowych, w niniejszym artykule przedstawiono statystyki opisowe dotyczące danych o uszkodzeniach i opracowano trend uszkodzeń w oparciu o proces spełniający prawo potęgowe. Jednocześnie ustalono zasady rutynowej inspekcji i okresowych przeglądów, jak również sekwencyjnej obsługi zapobiegawczej przy ograniczonych wydatkach na utrzymanie ruchu. Proponowany model może być użytecznym narzędziem dla potrzeb oceny aktualnych warunków oraz przewidywania niezawodności w celu optymalizacji polityki utrzymania ruchu centrum obróbkowego.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 147-155
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System for Calibrating Analogue Merging Units in Absence of Synchronization Signals
Autorzy:
Cheng, H.-M.
Huang, Q.-F.
Ji, F.
Xu, Q.
Liu, J.
Tian, Z.
Powiązania:
https://bibliotekanauki.pl/articles/221084.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
intelligent substation
analogue merging unit
peer-to-peer communication
calibration system
synchronization signal
Opis:
Synchronization signals are requisite for calibrating electrical measurement devices with digital output when using conventional calibration methods. However, since the signal sampling process of the analogue merging units (MUs) operating in an intelligent substation does not rely on external synchronization signals, accuracy calibration without the use of synchronization signals is of particular importance in order to guarantee the measurement accuracy in practical situations. So far, very little research on calibration systems independent of synchronization signals has been performed. This paper presents a design of the calibration system without dependence on synchronization signals. To verify the feasibility of the proposed design, the designed system and a conventional calibration system have been employed in testing the accuracy of the same analogue MU of a 0.2 accuracy class. The comparison of the test results shows that the differences of ratio errors are below 0.02%, and the maximum difference of phase errors is about 4′. This paper also provides a new efficient and significant calibration method which does not require any external synchronization signals.
Źródło:
Metrology and Measurement Systems; 2018, 25, 1; 129-138
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of different sources of donor cells upon the nuclear transfer efficiency in Chinese indigenous Meishan pig
Autorzy:
Hua, Z.
Xu, G.
Liu, X.
Bi, Y.
Xiao, H.
Hua, W.
Li, L.
Zhang, L.
Ren, H.
Zheng, X.
Powiązania:
https://bibliotekanauki.pl/articles/31224.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Somatic cell nuclear transfer (SCNT) is currently the most efficient and precise method to generate genetically tailored pig models for both agricultural and biomedical research. However, its efficiency is crucially dependent on the source of nuclear donor cells. In this study, we compared the cloning efficiency by using three lines of donor cells that are derived from fetal, newborn and adult fibroblasts of Chinese indigenous Meishan pig. We showed that cleavage rate and blastocyst formation rate of the reconstructed embryos were not significantly different between the fetal (80.7% and 15.6%) and newborn ear skin (77.5% and 12.3%) fibroblast groups (p>0.05), but in both groups these indices were significantly higher than that found in the adult ear skin (70.5% and 8.8%; p<0.05). Reconstructed embryos derived from fetal, newborn, and adult ear skin fibroblasts were transferred to four surrogates, respectively. For the fetal, newborn, and adult ear skin fibroblasts, the number of pregnancies were two (50.0%), two (50.0%), and one (25.0%), respectively, and the number of deliveries were two (50.0%), one (25.0%), and zero (0.0%), respectively. Seven and two cloned piglets were obtained from the fetal and newborn ear skin fibroblasts respectively, while no piglets were obtained from the adult ear skin fibroblasts. Two cloned piglets from the newborn ear skin fibroblasts died shortly after birth because of neonatal asphyxia caused by dystocia. The birth weights of the piglets derived from the fetal and newborn ear skin fibroblasts were 1230.5 and 1310.0g, respectively, which were statistically insignificant (p>0.05), but both were significantly higher than that of the control groups (p<0.05). Microsatellite analyses demonstrated that the genotypes of all cloned piglets were identical to their donor cells. Therefore, cloned pigs were successfully produced using two sources of donor cells isolated from the fetal and newborn ear skin fibroblasts of Meishan piglet, and indicating a better cloning efficiency than that obtained from adult fibroblasts. We concluded that the nuclear donor cell lines have significant impact on the developmental competence of cloned embryos as well as on the cloning efficiency of Meishan pig.
Źródło:
Polish Journal of Veterinary Sciences; 2016, 19, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acer truncatum seedlings are more plastic than Quercus variabilis seedlings in response to different light regimes
Autorzy:
Guo, X.
Wang, R.-Q.
Wang, C.D.
Xu, F.
Zhao, S.
Guo, W.-H.
Powiązania:
https://bibliotekanauki.pl/articles/41339.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Acer truncatum
seedling
Quercus variabilis
Chinese cork oak
plant response
light regime
irradiance acclimation
chlorophyll fluorescence
morphology
photoinhibition
Opis:
In this study, we investigated responses of the mid-successional species Acer truncatum Bunge and the late-successional species Quercus variabilis Blume to three solar illumination conditions: (1) constant low light (CL), (2) constant high light (CH) and (3) low light first and high light afterwards (LH). The last treatment was to simulate a canopy opening. Both species exhibited increases in biomass, totally and in part, and decreases in leaf water content, specific leaf area and chlorophyll concentrations in LH treatment compared to CL treatment. For A. truncatum, exposure to high light condition (LH) increased crown area, and decreased root to shoot ratio, stem mass ratio and leaf perimeter. However, for Q. variabilis, LH treatment increased stem diameter at ground height, effective quantum yield, photochemical quenching and decreased maximum photosystem II quantum yield. The biomass allocation pattern did not change in Q. variabilis among three light conditions. With respect to newly developed leaves, no significant differences were found in leaf size of Q. variabilis between LH treatment and CH treatment while that of A. truncatum decreased in LH treatment. All chlorophyll fluorescence parameters in newly developed oak leaves in LH treatment increased compared to those of CH treatment while no difference was found for A. truncatum between LH and CH treatment. A. truncatum displayed a greater overall plasticity than Q. variabilis although the oak seedlings have a greater plasticity with respect to chlorophyll concentration and chlorophyll fluorescence parameters. A. truncatum should be a better candidate for vegetation recovery, especially in places with heterogeneous light conditions.
Źródło:
Dendrobiology; 2016, 76
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase features of several typical blood cells and their identification without unwrapping
Autorzy:
Wang, Y.
Chen, Y
Lü, C.
Shang, X.
Xu, Y.
Wu, H.
Zhu, X.
Jin, W.
Powiązania:
https://bibliotekanauki.pl/articles/173588.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
digital holographic phase
nucleated cell
phase model
wrapped phase features
identification
Opis:
The digital holographic phase microscopy (DHPM) technique which has been proposed for cellular morphology and dynamic analysis yielded highly desirable results. However, for nucleated cells (especially white blood cells (WBCs)), their submicroscopic structure has not yet been deconstructed through a phase unwrapping method due to the heterogeneity of an internal phase. By analyzing the phase heterogeneity of subclasses of WBCs, the typical phase models of them are built first in this paper; using the simulation method, the wrapped phase distributions of these models are obtained. However, by optimizing the wrapped phase maps and analyzing the relationships between them and typical blood cells, their features are selected and extracted. Then the models built are sorted out from each other successfully without unwrapping via analyzing these extracted features, which provides a valuable approach and technological base for the classification and identification of blood cells.
Źródło:
Optica Applicata; 2013, 43, 3; 505-514
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical and Scintillation Properties of $Bi_{4}(Ge_{x}S_{1-x})_{3}O_{12}$ Single Crystal
Autorzy:
Xiao, X.
Xu, J.
Lu, B.
Cai, W.
Zhang, Y.
Shen, H.
Yang, B.
Xiang, W.
Powiązania:
https://bibliotekanauki.pl/articles/1399369.pdf
Data publikacji:
2015-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.10.Fq
61.05.C-
78.20.Ci
78.70.Ps
Opis:
The solid solution crystals, $Bi_{4}(Ge_{x}Si_{1-x})_{3}O_{12}$ (BGSO) with x=0, 0.05, and 0.15, have been grown by the modified vertical Bridgman method. The as-grown crystals show 80% of transmittance with an absorption edge of 285 nm. The relative light yields of BGSO crystals are found to be 7.2%, 6.3%, and 4.2% of CsI(Tl) crystal for x=0, 0.05, and 0.15, respectively. The energy resolutions of these crystals are 18.9%, 21.3%, and 24.7%, respectively, with PMT for 662 keV gamma rays at room temperature when exposed to $\text{}^{137}Cs$ γ -ray. The scintillation performance of BGSO crystals clearly deteriorates with the increase of Ge content. However, the appropriate number of germanium ions doped to BSO crystal can improve its crystallization behavior and effectively restrain component segregation. It is expected that large size crystals of BGSO will be grown and applied to the dual readout calorimeter in the nearest future.
Źródło:
Acta Physica Polonica A; 2015, 127, 3; 854-858
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnolol inhibits Streptococcus suis-induced inflammation and ROS formation via TLR2/MAPK/NF-κB signaling in RAW264.7 cells
Autorzy:
Wang, J.
Sun, Y.
Zhang, L.
Xu, W.
You, J.
Lu, H.
Song, Y.
Wei, J.
Li, L.
Powiązania:
https://bibliotekanauki.pl/articles/2087779.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnolol
Streptococcus suis
Toll-like receptor2
mitogen-activated protein kinase
nuclear factor Kappa B
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 111-118
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular characterization and expression patterns of ghrelin in the reindeer (Rangifer tarandus)
Autorzy:
Zhang, M.
Xu, X.
Zhu, X.
Jin, X.
Bao, H.
Dugeer, S.
Du, C.
Cao, G.
Yang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087780.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ghrelin
reindeer (Rangifer tarandus)
cDNA cloning
structural characterization
tissue expression
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 55-64
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulation of Dynamic Pressure and Displacement for the Top Part of Men’s Socks Using the Finite Element Method
Numeryczna symulacja ciśnienia dynamicznego i przesunięć w górnej części skarpet męskich
Autorzy:
Dan, R.
Dan, M. H.
Fan, X. R.
Chen, D. S.
Shi, Z.
Zhang, M.
Xu, L. B.
Powiązania:
https://bibliotekanauki.pl/articles/234002.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
top part of socks
pressure
displacement
finite element
dynamic
górna część skarpetki
ciśnienie
przemieszczenie
elementy skończone
dynamika
Opis:
Numerical simulation of elastic human body deformation and dynamic pressure and displacement distribution are critical for pressure comfort and optimal design of apparel products. This paper demonstrates an analytical method for simulating dynamic pressure and displacement at the top part of men’s socks using the finite element method (FEM). The dynamic pressure is divided into two parts: the first is pressure with time, and the second is pressure with walking. Pressure with time is set at six periods (maximum 12 h). After measuring pressure values in different periods of time and simulating pressure and displacement distribution using ANSYS software, the tendency of pressure and displacement changes with time at the top part of men’s socks can be obtained. We divided the walking process into four phases to analyse the variation rule of pressure and displacement changes with movement in this research work. Meanwhile the lower leg cross section is divided into four equal regions according to the angle, and dynamic changes in the area shrinkage mass of each region can be calculated, respectively. All these solutions provide a theoretical reference for the optimal design of the top part of men’s socks.
Numeryczna symulacja elastycznej deformacji ciała ludzkiego, dynamicznego ciśnienia i rozkładu przesunięć są krytycznymi czynnikami komfortu i optymalnych rozwiązań ciśnieniowych wyrobów odzieżowych. Przedstawiono analityczną metodę symulacji ciśnień dynamicznych i przesunięć w górnej części męskich skarpet stosując metodę elementów skończonych. Analizę ciśnień dynamicznych przeprowadzono rozpatrując dwa stadia: zmiany ciśnienia w czasie i zmiany przy ruchu związane z chodzeniem. Na podstawie pomiarów ciśnienia i odkształcenia w określonych przedziałach czasowych określono rozkład odkształceń stosując program ANSYS. Proces chodzenia podzielono na cztery fazy. Wszystkie przeprowadzone badania i rozwiązania dostarczyły informacji dla przedstawienia optymalnego sposobu projektowania męskich skarpet.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 4 (100); 112-117
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Induction of immune responses in sheep by vaccination with liposome-entrapped DNA complexes encoding Toxoplasma gondii MIC3 gene
Autorzy:
Hiszczynska-Sawicka, E.
Li, H.
Xu, J.B.
Akhtar, M.
Holec-Gasior, L.
Kur, J.
Bickerstaffe, R.
Stankiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/30828.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
immune response
sheep
vaccination
Toxoplasma gondii
parasite
protozoan parasite
pregnancy
MIC3 gene
MIC3 antigen
Opis:
Toxoplasma gondii is a parasite that has been extensively studied due to its medical and veterinary importance in terminating pregnancies. Consequently, a satisfactory vaccine is required to control its adverse effects on pregnant animals. The microneme protein, MIC3, is a major adhesion protein that binds to the surface of host cells and parasites, and is therefore a potential vaccine against T. gondii. The viability of MIC3 as a vaccine is investigated in this study. Sheep were injected twice, intramuscularly, with plasmids containing DNA encoding for the mature form of MIC3 protein formulated into liposomes. Control sheep were injected with an empty vector or received no injections. The injection of sheep with DNA plasmids encoding for MIC3 elicited an immune response after the first and second injections as indicated by antibody responses and the production of IFN-γ. The immune response, as measured by the IgG2 and IgG1 serum levels, was boosted after the injection of the MIC3 DNA vaccine together with high anti-MIC3 antibodies. The results demonstrate that the intramuscular injection of sheep with a plasmid containing DNA coding for MIC3 protein induces a significant and effective immune response against T. gondii.
Źródło:
Polish Journal of Veterinary Sciences; 2012, 15, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bacterial communities in PM2.5 and PM10 in broiler houses at different broiler growth stages in spring
Autorzy:
Zhang, J.
Li, Y.
Xu, E.
Jiang, L.
Tang, J.
Li, M.
Zhao, X.
Chen, G.
Zhu, H.
Yu, X.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/2087465.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bacterial communities
broilers
high-throughput sequencing
particulate matter
Źródło:
Polish Journal of Veterinary Sciences; 2019, 3; 495-504
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification, evaluation, and application of the genomic-SSR loci in ramie
Autorzy:
Luan, M.-B.
Yang, Z.-M.
Zhu, J.-J.
Deng, X.
Liu, C.-C.
Wang, X.-F.
Xu, Y.
Sun, Z.-M.
Chen, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/57981.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
To provide a theoretical and practical foundation for ramie genetic analysis, simple sequence repeats (SSRs) were identified in the ramie genome and employed in this study. From the 115 369 sequences of a specific-locus amplified fragment library, a type of reduced representation library obtained by high-throughput sequencing, we identified 4774 sequences containing 5064 SSR motifs. SSRs of ramie included repeat motifs with lengths of 1 to 6 nucleotides, and the abundance of each motif type varied greatly. We found that mononucleotide, dinucleotide, and trinucleotide repeat motifs were the most prevalent (95.91%). A total of 98 distinct motif types were detected in the genomic-SSRs of ramie. Of them, The A/T mononucleotide motif was the most abundant, accounting for 41.45% of motifs, followed by AT/TA, accounting for 20.30%. The number of alleles per locus in 31 polymorphic microsatellite loci ranged from 2 to 7, and observed and expected heterozygosities ranged from 0.04 to 1.00 and 0.04 to 0.83, respectively. Furthermore, molecular identity cards (IDs) of the germplasms were constructed employing the ID Analysis 3.0 software. In the current study, the 26 germplasms of ramie can be distinguished by a combination of five SSR primers including Ibg5-5, Ibg3-210, Ibg1-11, Ibg6-468, and Ibg6-481. The allele polymorphisms produced by all SSR primers were used to analyze genetic relationships among the germplasms. The similarity coefficients ranged from 0.41 to 0.88. We found that these 26 germplasms were clustered into five categories using UPGMA, with poor correlation between germplasm and geographical distribution. Our study is the first large-scale SSR identification from ramie genomic sequences. We have further studied the SSR distribution pattern in the ramie genome, and proposed that it is possible to develop SSR loci from genomic data for population genetics studies, linkage mapping, quantitative trait locus mapping, cultivar fingerprinting, and as genetic diversity studies.
Źródło:
Acta Societatis Botanicorum Poloniae; 2016, 85, 3
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-71 z 71

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies