Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xing, Wang" wg kryterium: Autor


Tytuł:
Influence of different supply modes on the performance of linear induction motors
Autorzy:
Pałka, Ryszard
Woronowicz, Konrad
Kotwas, Jan
Xing, Wang
Chen, Hao
Powiązania:
https://bibliotekanauki.pl/articles/140372.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
finite element analysis
linear induction motor
Péclet number
end-effect
Opis:
This paper deals with the modelling of traction linear induction motors (LIMs) for public transportation. The magnetic end effect inherent to these motors causes an asymmetry of their phase impedances. Thus, if the LIM is supplied from the three-phase symmetrical voltage, its phase currents become asymmetric. This effect must be taken into consideration when simulating the LIMs’ performance. Otherwise, when the motor phase currents are assumed to be symmetric in the simulation, the simulation results are in error. This paper investigates the LIM performance, considering the end-effect induced asymmetry of the phase currents, and presents a comparative study of the LIM performance characteristics in both the voltage and the current mode.
Źródło:
Archives of Electrical Engineering; 2019, 68, 3; 473-483
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanism of the combined effects of air rate and froth depth on entrainment factor in copper flotation
Autorzy:
Wang, Lei
Xing, Yaowen
Wang, Jun
Powiązania:
https://bibliotekanauki.pl/articles/1449999.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
froth flotation
copper
entrainment
air rate
froth depth
Opis:
The effect of air rate and froth depth on the entrainment factor in flotation has been extensively studied, but further investigation on the underlying mechanism for their effect is still required. In this study, flotation tests were performed at different air rates and froth depths in a 3 $dm^3$ continuously operated cell using an artificial copper ore. The results showed that entrainment factor was affected by both air rate and froth depth, and the combined effect of these variables on entrainment factor depended strongly on the particle size. The entrainment factor increased with either increasing air rate at a relatively shallow froth or decreasing froth depth at a relatively high air rate. At a very low air rate and deep froth, higher entrainment factor was observed for mid-size and coarse particles. When the entrainment factor was correlated to the effective liquid velocity at the pulp/froth interface, the results indicated that multiple mechanisms were responsible for the effect on entrainment factor. At a relatively high air rate and shallow froth depth, entrainment factor had a linear relationship with the interface effective liquid velocity, suggesting that drag force dominated the change in the entrainment factor when air rate and froth depth were varied. At a very low air rate and deep froth, the entrainment factor for fine particles was found to correlate strongly with the interface effective liquid velocity, while the entrapment of solid particles may be the main reason for the high entrainment factor for mid-size and coarse particles under this condition.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 43-53
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monotone method for nonlinear second order periodic boundary value problems with Carathéodory functions
Autorzy:
Wang, Ming-Xing
Cabada, Alberto
Nieto, Juan
Powiązania:
https://bibliotekanauki.pl/articles/1311755.pdf
Data publikacji:
1993
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Tematy:
upper and lower solutions
monotone iterative technique
Carathéodory function
Opis:
The purpose of this paper is to study the periodic boundary value problem -u''(t) = f(t,u(t),u'(t)), u(0) = u(2π), u'(0) = u'(2π) when f satisfies the Carathéodory conditions. We show that a generalized upper and lower solution method is still valid, and develop a monotone iterative technique for finding minimal and maximal solutions.
Źródło:
Annales Polonici Mathematici; 1993, 58, 3; 221-235
0066-2216
Pojawia się w:
Annales Polonici Mathematici
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Auto mission planning system design for imaging satellites and its applications in environmental field
Autorzy:
He, Y.
Wang, Y.
Chen, Y.
Xing, L.
Powiązania:
https://bibliotekanauki.pl/articles/258754.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
systems engineering
imaging satellite
meteorological monitoring
space-ground integration
Opis:
Satellite hardware has reached a level of development that enables imaging satellites to realize applications in the area of meteorology and environmental monitoring. As the requirements in terms of feasibility and the actual profit achieved by satellite applications increase, we need to comprehensively consider the actual status, constraints, unpredictable information, and complicated requirements. The management of this complex information and the allocation of satellite resources to realize image acquisition have become essential for enhancing the efficiency of satellite instrumentation. In view of this, we designed a satellite auto mission planning system, which includes two sub-systems: the imaging satellite itself and the ground base, and these systems would then collaborate to process complicated missions: the satellite mainly focuses on mission planning and functions according to actual parameters, whereas the ground base provides auxiliary information, management, and control. Based on the requirements analysis, we have devised the application scenarios, main module, and key techniques. Comparison of the simulation results of the system, confirmed the feasibility and optimization efficiency of the system framework, which also stimulates new thinking for the method of monitoring environment and design of mission planning systems.
Źródło:
Polish Maritime Research; 2016, S 1; 59-70
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction and separation of zinc, lead, silver, and bismuth from bismuth slag
Autorzy:
Xing, Peng
Ma, Baozhong
Wang, Chengyan
Chen, Yongqiang
Powiązania:
https://bibliotekanauki.pl/articles/109744.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bismuth
zinc
lead
silver
extraction
separation
Opis:
The present paper deals with the extraction and separation of zinc, lead, silver, and bismuth from a refractory bismuth refining slag via a hydrometallurgical route. The process consists of a preliminary leaching of zinc with water, followed by the selective leaching of lead and silver with a calcium chloride solution, leading to the crystallization of lead chloride and the cementation of silver. The diagrams of the total concentrations of [Pb]/[Ag] versus [Cl-] and temperature in the Pb/Ag-Cl-H2O system were drawn, respectively, to determine the optimum concentration of leaching agent and leaching temperature. The potential-pH diagram of the Pb/Ag/Bi-H2O system indicates that the preferential leaching of lead and silver could be achieved. Finally, 98.8% of lead and 90.4% of silver were selectively removed by further leaching the water leaching residue with 400 g/dm3 of CaCl2 solution at pH 4.5 and 80 °C, while only 3.7% of bismuth was leached in this stage. Fifty-nine percent of lead in the leach liquor was separated out as PbCl2 by natural cooling. Ninety-five percent of silver in mother liquor was recovered by cementation with a lead sheet. The depleted CaCl2 solution can be sent to the leaching step again to close the loop.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 173-183
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of a hindered amine light stabilizer on the aging behavior of moisture-curable polyurethane as a cultural relics consolidant
Wpływ aminowego stabilizatora światła z zawadą przestrzenną na starzenie utwardzanego wilgocią poliuretanu stosowanego jako konsolidator zabytków
Autorzy:
Zhao, Xing
Wang, Liqin
Guo, Lang
Ma, Yanni
Wang, Ziming
Niu, Qing
Powiązania:
https://bibliotekanauki.pl/articles/947112.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
moisture-curable polyurethane
hindered amine light stabilizer HALS 770
consolidant
cultural relics
aging
light stabilizer
poliuretan utwardzany w kontakcie z wilgocią
aminowy stabilizator światła HALS 770
konsolidator
relikty kulturowe
starzenie
stabilizator światła
Opis:
This paper aims to study the effect of a hindered amine light stabilizer (HALS 770), on the aging behavior of moisture-curable polyurethane (MCPU). MCPU is specifically developed by ourselves for the reinforcement of fragile organic cultural relics in high-humidity environments, but its aging resistance is insufficient. To improve the aging resistance of MCPU, HALS 770 was used to prepare a modified MCPU (MMCPU). A colorimeter, an infrared spectrometer and a thermal analyzer were used to characterize the color and structure changes of MCPU and MMCPU during aging and to determine their aging kinetics. The results show that the activation energy for the thermal decomposition increased from 91–109 kJ/mol to 135–151 kJ/mol. When the color change is used as the indicator for aging, the lifetime of MMCPU under UV aging is 133% longer than that of MCPU, the lifetime of MMCPU under thermal aging at 293 K is 41.3 times that of MCPU. The addition of HALS 770 to MCPU significantly inhibits the aging behavior.
Zbadano wpływ dodatku aminowego stabilizatora światła z zawadą przestrzenną (HALS 770) na starzenie się poliuretanu utwardzanego w kontakcie z wilgocią (MCPU). MCPU opracowano specjalnie do wzmacniania delikatnych organicznych zabytków kultury w środowiskach o dużej wilgotności, jednak jego odporność na starzenie jest niewystarczająca. W celu zwiększenia odporności na starzenie MCPU modyfikowano (otrzymano MMCPU) dodatkiem aminowego stabilizatora światła z zawadą przestrzenną (HALS 770). Zmiany koloru, przyjęte jako wskaźnik starzenia, i struktury MCPU oraz kinetykę procesu oceniano z wykorzystaniem kolorymetru, spektrometru podczerwieni i analizatora termicznego. Wyniki wskazują, że dodatek HALS 770 w istotnym stopniu hamuje procesy starzenia MCPU – stwierdzono zwiększenie energii aktywacji rozkładu termicznego, z 91–109 kJ/mol MCPU do 135–151 kJ/mol – MMCPU. MMCPU w procesie starzenia UV był o 133% stabilniejszy niż MCPU i 41,3 razy bardziej odporny na starzenie termiczne w 293 K.
Źródło:
Polimery; 2020, 65, 4; 297-303
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positronium time-of-flight Measurements of Mesoporous Silica Films
Autorzy:
Kuang, Peng
Zhang, Xiao
He, Chun
Cao, Xing
Wang, Bao
Powiązania:
https://bibliotekanauki.pl/articles/1029796.pdf
Data publikacji:
2018-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.05.-a
68.47.Mn
Opis:
Mesoporous silica films were synthesized with various concentrations of cetyltrimethylammonium bromide (CTAB) in precursor sols through the method of electro-assisted self-assembly (EASA). Oriented pore channels were observed in the films prepared with more CTAB in the precursor sols. Positronium time-of-flight (Ps-TOF) measurements were performed for the silica films with different porous structures. It is demonstrated that the Ps emission intensity and energies are well correlated to the apparent porosity, pore interconnectivity and possibly pore channel orientation. The results indicate that Ps-TOF can be a useful technique for probing the structures of porous films.
Źródło:
Acta Physica Polonica A; 2018, 133, 1; 3-6
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A data-driven predictive maintenance strategy based on accurate failure prognostics
Autorzy:
Chen, Chuang
Wang, Cunsong
Lu, Ningyun
Jiang, Bin
Xing, Yin
Powiązania:
https://bibliotekanauki.pl/articles/1841691.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
predictive maintenance
failure prognostics
performance degradation
maintenance cost
Opis:
Maintenance is fundamental to ensure the safety, reliability and availability of engineering systems, and predictive maintenance is the leading one in maintenance technology. This paper aims to develop a novel data-driven predictive maintenance strategy that can make appropriate maintenance decisions for repairable complex engineering systems. The proposed strategy includes degradation feature selection and degradation prognostic modeling modules to achieve accurate failure prognostics. For maintenance decision-making, the perfect time for taking maintenance activities is determined by evaluating the maintenance cost online that has taken into account of the failure prognostic results of performance degradation. The feasibility and effectiveness of the proposed strategy is confirmed using the NASA data set of aero-engines. Results show that the proposed strategy outperforms the two benchmark maintenance strategies: classical periodic maintenance and emerging dynamic predictive maintenance.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 2; 387-394
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Light field camera all-in-focus image acquisition based on angular information
Autorzy:
Wu, Yingchun
Cheng, Xing
Liang, Jie
Wang, Anhong
Zhao, Xianling
Powiązania:
https://bibliotekanauki.pl/articles/1835771.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
all-in-focus image fusion
light field camera
spatial information
angular information
macro-pixel energy difference
Opis:
Traditional light field all-in-focus image fusion algorithms are based on the digital refocusing technique. Multi-focused images converted from one single light field image are used to calculate the all-in-focus image and the light field spatial information is used to accomplish the sharpness evaluation. Analyzing the 4D light field from another perspective, an all-in-focus image fusion algorithm based on angular information is presented in this paper. In the proposed method, the 4D light field data are fused directly and a macro-pixel energy difference function based on angular information is established to accomplish the sharpness evaluation. Then the fused 4D data is guided by the dimension increased central sub-aperture image to obtain the refined 4D data. Finally, the all-in-focus image is calculated by integrating the refined 4D light field data. Experimental results show that the fused images calculated by the proposed method have higher visual quality. Quantitative evaluation results also demonstrate the performance of the proposed algorithm. With the light field angular information, the image feature-based index and human perception inspired index of the fused image are improved.
Źródło:
Optica Applicata; 2021, 51, 2; 289-304
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel reliability estimation method of multi-state system based on structure learning algorithm
Nowatorska metoda oceny niezawodności systemów wielostanowych w oparciu o algorytm uczenia struktury
Autorzy:
Li, Zhifeng
Wang, Zili
Ren, Yi
Yang, Dezhen
Lv, Xing
Powiązania:
https://bibliotekanauki.pl/articles/301718.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
reliability analysis
Bayesian network
structure learning
multi-state system (MSS)
dependent failure
analiza niezawodności
sieć bayesowska
uczenie struktury
system wielostanowy
uszkodzenie zależne
Opis:
Traditional reliability models, such as fault tree analysis (FTA) and reliability block diagram (RBD), are typically constructed with reference to the function principle graph that is produced by system engineers, which requires substantial time and effort. In addition, the quality and correctness of the models depend on the ability and experience of the engineers and the models are difficult to verify. With the development of data acquisition, data mining and system modeling techniques, the operational data of a complex system considering multi-state, dependent behavior can be obtained and analyzed automatically. In this paper, we present a method that is based on the K2 algorithm for establishing a Bayesian network (BN) for estimating the reliability of a multi-state system with dependent behavior. Facilitated by BN tools, the reliability modeling and the reliability estimation can be conducted automatically. An illustrative example is used to demonstrate the performance of the method.
Tradycyjne modele niezawodności, takie jak analiza drzewa błędów (FTA) czy schemat blokowy niezawodności (RBD), buduje się zazwyczaj w oparciu o tworzone przez inżynierów systemowych schematy zasad działania systemu, których przygotowanie wymaga dużych nakładów czasu i pracy. Jakość i poprawność tych modeli zależy od umiejętności i doświadczenia inżynierów, a same modele są trudne do zweryfikowania. Dzięki rozwojowi technik akwizycji i eksploracji danych oraz modelowania systemów, dane operacyjne złożonego systemu uwzględniające jego zależne, wielostanowe zachowania mogą być pozyskiwane i analizowane automatycznie. W artykule przedstawiono metodę konstrukcji sieci bayesowskiej (BN) opartą na algorytmie K2, która pozwala na ocenę niezawodności systemu wielostanowego o zachowaniach zależnych. Dzięki narzędziom BN, modelowanie i szacowanie niezawodności może odbywać się automatycznie. Działanie omawianej metody zilustrowano na podstawie przykładu.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 1; 170-178
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large deformation and stability analysis of a cylindrical rubber tube under internal pressure
Autorzy:
Sang, J.
Xing, S.
Liu, H.
Li, X.
Wang, J.
Lv, Y.
Powiązania:
https://bibliotekanauki.pl/articles/279927.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
large deformation analysis
stability analysis
rubber tube
nonlinear elastic theory
Opis:
Rubber tubes under pressure can undergo large deformations and exhibit a particular nonlinear elastic behavior. In order to reveal mechanical properties of rubber tubes subjected to internal pressure, large deformation analysis and stability analysis have been proposed in this paper by utilizing a modified Gent’s strain energy function. Based on the nonlinear elastic theory, by establishing the theoretical model of a rubber tube under internal pressure, the relationship between the internal pressure and circumferential principal stretch has been deduced. Meanwhile stability analysis of the rubber tube has also been proposed and the relationship between the internal pressure and the internal volume ratio has been achieved. The effects on the deformation by different parameters and the failure reasons of the rubber tube have been discussed, which provided a reasonable reference for the design of rubber tubes.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 177-188
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Particle Sizes of Slag on Reduction Characteristics of Nickel Slag-Coal Composite Briquette
Autorzy:
Li, Xiaoming
Li, Yi
Xing, Xiangdong
Wang, Yanjun
Wen, Zhenyu
Yang, Haibo
Powiązania:
https://bibliotekanauki.pl/articles/2049420.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
resources reutilization
nickel slag
particle size
direct reduction
reduction characteristics
Opis:
Nickel slag has a high-content iron and is a secondary utilization resource with great development potential. The coal-based direct reduction is an innovative technology that can be used to utilize the iron resources in nickel slag. The effect of the particle size of nickel slag on the strength and the reduction of nickel slag-coal composite briquettes were investigated. Four samples with particle size of 75~106 μm, 106~150 μm, 150~270 μm, and >270 μm were selected. The drop strength increased 9.4 times and the compressive strength reached 281.1 N when the nickel slag particle size decreased from >270 μm to 75~106 μm. The reduction degree determined by the data from the thermogravimetric experiment indicated that its maximum was 79.545%. The reduction experiments performed at 1200°C for 45 minutes indicated that the nickel slag with particle sizes between 75~106 μm were appropriate for the reduction of the nickel slag-coal composite briquettes.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 127-134
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A spatial study on Keshan disease prevalence and selenoprotein P in the Heilongjiang Province, China
Autorzy:
Wang, Yanan
Zhang, Xiao
Wang, Tong
Hou, Jie
Guo, Zhongying
Han, Xiaomin
Zhou, Huihui
Liang, Hong
Xing, Zhifeng
Powiązania:
https://bibliotekanauki.pl/articles/2095499.pdf
Data publikacji:
2021-09-03
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
prevalence
biomarker
prevention and control
endemic cardiomyopathy
selenoprotein P
spatial regression analysis
Opis:
ObjectivesFew spatial studies on Keshan disease (KD) prevalence and serum selenoprotein P (SELENOP) levels have been reported in the Heilongjiang Province, China. This study aimed to investigate the spatial relationships between KD prevalence, SELENOP levels, and the socio-economic status for the precise prevention and control of KD.Material and MethodsThe study was carried out in all the 66 KD endemic counties in the Heilongjiang Province using a non-probability sampling method of a key village survey based on county-wide case-searching. The participants completed a questionnaire and had their serum SELENOP levels measured using enzyme-linked immunosorbent assay. Thematic maps were created, and spatial regression analysis was performed by ordinary least squares using ArcGIS 9.0.ResultsOverall, 53 676 residents were surveyed based on case-searching, and blood samples were collected from 409 residents. In total, 50 chronic KD cases were identified with a total prevalence of 9.3/10 000 population. The prevalence in the Tangyuan County was the highest (250/10 000 population). The mean serum SELENOP level was 13.96 mg/l. The spatial regression analysis showed that KD prevalence positively correlated with SELENOP levels and negatively with per capita disposable income among rural residents.ConclusionsThe Tangyuan County should be considered for the precise prevention and control of KD. Further research is necessary to verify the reliability of SELENOP for estimating body selenium levels, and to better understand the relationship between selenium intake and KD in the investigated area.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2021, 34, 5; 659-666
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diffraction mechanism of five-port transmission gratings
Autorzy:
Gao, Chenhao
Wang, Bo
Wen, Kunhua
Meng, Ziming
Wang, Qu
Nie, Zhaogang
Xing, Xiangjun
Chen, Li
Lei, Liang
Zhou, Jinyun
Powiązania:
https://bibliotekanauki.pl/articles/1835817.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
1 × 5 splitting
single-groove grating
normal incidence
Opis:
This paper designs a five-port transmission grating under normal incidence. Rigorous coupled-wave approach is used to optimize the grating parameters. The energy of the grating is mainly dispersed to the 0th, ±1st and ±2nd orders. The efficiency of each diffraction order under both polarizations is close to 20%. The modal method is used to describe the propagation mechanism of the two polarized lights in the grating, and the diffraction behavior of the grating is analyzed. In addition, the grating has a wide range of incident characteristics and a large process tolerance. Therefore, this five-port beam splitter with a connecting layer will be a good polarization-independent beam splitting device.
Źródło:
Optica Applicata; 2020, 50, 4; 609-618
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vertebral fusion in two Early Jurassic sauropodomorph dinosaurs from the Lufeg Formation of Yunnan, China
Autorzy:
Xing, L.
Rothschild, B.M.
Ran, H.
Miyashita, T.
Scott Persons IV, W.
Sekiya, T.
Zhang, J.
Wang, T.
Dong, Z.
Powiązania:
https://bibliotekanauki.pl/articles/19988.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
Here we describe two instances of pathological vertebral fusion in two genera of sauropodomorph dinosaurs from the Early Jurassic Lufeng Formation in Yunnan, China. The first is a specimen, of Lufengosaurus huenei with two fused cervical vertebrae, and the other is a specimen of the Lufeng basal sauropod, with two fused caudal vertebrae. Both pathologies are consistent with spondyloarthropathy and represent the earliest known occurrence of that disease in dinosaurs. The two specimens affirm that early dinosaurs suffered from the same bone diseases as living vertebrates. Spondyloarthropathy in these dinosaurs may have been induced by long-term mechanical stress, such as weight bearing, and/or limited motion at the joint that would otherwise have inhibited such remodeling. In both cases, surface remodeling suggests that the animals survived well beyond the initiation of spondyloarthropathy.
Źródło:
Acta Palaeontologica Polonica; 2015, 60, 3
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies