Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Tomczak, W." wg kryterium: Autor


Tytuł:
The application of ultrafiltration for separation of glycerol solution fermented by bacteria
Autorzy:
Tomczak, W.
Gryta, M.
Powiązania:
https://bibliotekanauki.pl/articles/779520.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
ultrafiltration
fouling
ceramic membrane
glycerol fermentation
Opis:
A biotechnological synthesis generated a fermentation broth containing the dissociated forms of organic compounds and residual mineral salts. An effective method of selective removal of the ionic species and organic compounds from solutions comprises nanofiltration and reverse osmosis. Ultrafiltration (UF) was used in this work as a pre-treatment method for the preparation of feed for these processes. The UF study was carried out with a real broth, which was obtained using Citrobacter freundii bacteria for the fermentation of glycerol solutions, resulting in the UF permeate with turbidity below 0.1 NTU. However, a significant decline of the permeate flux was observed during the UF process. The influence of the transmembrane pressure on the fouling intensity of used ceramic membranes was investigated. A periodical membrane cleaning was carried out by rinsing with water and a 1 wt % solution of sodium hydroxide. The applied cleaning procedures permitted to restore the initial permeate flux.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 3; 115-120
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania rozdzielania brzeczek z bakteryjnej fermentacji glicerolu w układzie ultrafiltracja-nanofiltracja
Separation of glycerol solutions from bacterial fermentation in ultrafiltration-nanofiltration processes
Autorzy:
Gryta, M.
Tomczak, W.
Bastrzyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/2072386.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ultrafiltracja
nanofiltracja
glicerol
fermentacja
ultrafiltration
nanofiltration
glycerol
fermentation
Opis:
Przeprowadzono badania separacji brzeczek fermentacyjnych w układzie ultrafiltracja-nanofiltracja. Do fermentacji glicerolu zastosowano bakterie Lactobacillus casei. W procesie UF uzyskano filtrat o mętności poniżej 0,1 NTU. Proces NF pozwolił usunąć z brzeczek większość obecnych w nich soli. Zastosowanie membran NF270 i NF90 umożliwiło uzyskać także częściowy rozdział związków organicznych powstających podczas fermentacji.
The separation of fermentation broths by ultrafiltration and nanofiltration integrated processes was investigated. The glycerol fermentation was carried out using Lactobacillus casei bacteria. During the UF process the solutions were clarified obtaining turbidity of 0.1 NTU. The NF process allowed one to remove a majority of salts present in broth. The application of NF270 and NF90 membranes enabled one to obtain a partial separation of organic compounds formed during the fermentation process.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 423--424
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nadużywanie alkoholu w biografiach młodocianych toksykomanów
Excessive Drinking in the Biographies of Young Adult Drug Addicts
Autorzy:
Tomczak, Jerzy W.
Zakrzewski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/699052.pdf
Data publikacji:
1982
Wydawca:
Polska Akademia Nauk. Instytut Nauk Prawnych PAN
Tematy:
środki uzależniające
uzależnienie od substancji
młodociani
nadużywanie alkoholu
toksykomania
alcohol abuse
addictive substances
substance dependence
juvenile
toxicomania
Opis:
In the present study the young adult drug addicts are discussed who were included in the multidisciplinary research conducted by the Department of Mental Health of the Polish Academy of Sciences. An attempt is made to reveal the psycho-social mechanisms which cause the co-existence of excessive drinking and taking other drugs causing dependence. This problem is insufficiently elucidated both in Polish and foreign scientific literature. We do not cite here the description of the methods employed in the study of sufficient information is provided for in the summary of the study of the progress of dependence and changes in the social behavior of young adult drug addicts, published in the present volume. Attention should be drawn to a difference in the methods: in the present study, we deal first of all with young adult males. Among girls, excessive drinking does not play any important role, therefore the coexistence of alcohol and other drugs in their life stories occurs comparatively rarely. The phenomenon of excessive drinking occurred in 48 boys - drug addicts, which makes 58% of the total of 83 boys. Excessive drinking generally preceded the taking of drugs; alcohol was also used as a mean to soften the abstinence symptoms due to a temporary lack of the basic drug; drinking resulted also from a futile attempt at withdrawal from an advanced morphine habit. The cases of simultaneous drinking and taking of narcotic drugs in order to achieve more intense experiences were rare, as well as those of alternate drinking and taking drugs; in this last case, it meant that the individual was first of all anxious to strenghten the bonds between the members of the group, not yet feeling any mental nor all the more physical symptoms of dependence on alcohol or other drugs. To sum up, we noted in the large part of the addicts the easiness of changing from narcotic drugs to alcohol and vice versa. The possible general interpretation of these facts is as follows: individuals with certain personality deficiencies are characterized by a low tolerance to defeats, stress and tensions, which causes the need to seek the so-called “mental prothesis” or the desire to change one’s own state of mind. These needs and desires can be aggravated by the intensified symptoms of puberty, among them excessive and inadequate emotional reactions, discontent with one’s everyday duties and necessities, states of depression and dysphoria. Both alcohol and narcotic drugs can soothe these needs on temporarily satisfy them, though naturally not identically nor to the same extent. Therefore, where greater efficiency of reaction is desired, the individual may pass on to narcotic drugs. On the other hand, when the person is first of all anxious to soothe the conflicts with his immediate environment, to avoid pressure by the police and the sentence, i.e., meet with more indulgence on the part of his environment and at the same time to have less problems with purchasing a particular drug, and thus to avoid in future the painful  withdrawal symptoms - in such cases the conversion from morphine or other drugs to alcohol is probable. Among the individuals who had often drunk alcohol before they started taking narcotic drugs, the later reverse to alcohol to soothe withdrawal  symptoms caused by the lack of morphine or other drugs which brought about the state of dependence, is highly probable as the individuals in question already know the influence, of alcohol and the favourable reaction of their organism to it.
Źródło:
Archiwum Kryminologii; 1982, VIII-IX; 389-401
0066-6890
2719-4280
Pojawia się w:
Archiwum Kryminologii
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie SSN w modelowaniu równowagi sorpcyjnej jonów metali ciężkich na klinoptylolicie
Application of ANN to the sorption equilibrium modelling of heavy metal ions on clinoptilolite
Autorzy:
Tomczak, E.
Kamiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/125729.pdf
Data publikacji:
2012
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
sztuczne sieci neuronowe
równowaga adsorpcyjna
jony metali ciężkich
klinoptylolit
artificial neural network
adsorption equilibrium
heavy metals ions
clinoptilolite
Opis:
Zainteresowanie sztucznymi sieciami neuronowymi potwierdza wzrost publikacji z dziedziny inżynierii chemicznej, procesowej i ochrony środowiska. Po doborze odpowiedniej architektury sieci i metody uczenia można przystąpić do trenowania sieci na podstawie przeprowadzonych eksperymentów. W takim podejściu nie jest wymagana znajomość matematycznego opis procesu/obiektu. W pracy przedstawiono możliwość przewidywania izoterm sorpcji za pomocą perceptronu wielowarstwowego (MLP) w układach jedno-, dwui wieloskładnikowych. Obliczenia neuronowe oparto na badaniach eksperymentalnych przeprowadzonych dla układu klinoptylolit - mieszanina jonów metali ciężkich: Cu(II), Zn(II), i Ni(II). Jakość obliczeń sprawdzono za pomocą kwadratu współczynnika determinacji i średniego błędu kwadratowego, uzyskując wysoce zadowalające wyniki. Stwierdzono przydatność klinoptylolitu do usuwania jonów metali ciężkich z roztworu. Określono selektywność tego zeolitu zgodnie z szeregiem: Cu(II) > Zn(II) > Ni(II).
The latest achievements in the field of mathematical modelling include the application of artificial neural networks (ANN). A recent dynamic development of ANN provided an efficient and universal tool that is used to solve many tasks, including modelling, approximation and identification of objects. The initial step of applying the network to a given process consists in the determination of weights of the proposed neural network structure. This is performed on the basis of training data. A network that is properly trained allows correct information to be obtained on the basis of other data which have not been used in the network training. In most cases the network training is performed on the basis of a known mathematical model. However, the training of a network can be also performed using experimental data. In the last decade a growing interest is observed in inexpensive and very cheap adsorbents to remove heavy metal ions. Clinoptilolite is the mineral sorbent extracted in Poland used to remove heavy metal ions from diluted solutions. Equilibrium experiments were carried out to estimate sorptivity of a clinoptilolite and its selectivity towards Cu(II), Zn(II) and Ni(II) ions in multicomponent solution. Calculations with the use of MLP enabled description of sorption isotherms for when one, two and three ions were present at the same time in the solution. The network also enabled an analysis of sorption of the selected ion, taking into account the effect of its concentration.
Źródło:
Proceedings of ECOpole; 2012, 6, 2; 664-669
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie tanich adsorbentów do uzdatniania wody
Low-cost sorbents applications for water treatment
Autorzy:
Kamiński, W.
Tomczak, E.
Powiązania:
https://bibliotekanauki.pl/articles/125882.pdf
Data publikacji:
2014
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
naturalne sorbenty
oczyszczanie wody
równowaga
kinetyka sorpcji
dynamika sorpcji
natural sorbents
water treatment
equilibrium
kinetics sorption
dynamic sorption
Opis:
W ciągu ostatnich kilku lat poszukiwanie nowych tanich sorbentów stało się ważnym, szeroko analizowanym zagadnieniem przez wiodące światowe ośrodki badawcze. Tematyka obejmuje adsorpcję: jonów metali ciężkich, barwników, fenoli i ich pochodnych, węglowodorów itp. Istotą problemu jest zastąpienie drogich tradycyjnych sorbentów tanimi, które często są produkowane z materiałów odpadowych. Ocena skuteczności naturalnych sorbentów wymaga przeprowadzania eksperymentów na konkretnej grupie związków i na wybranym sorbencie. Tanie naturalne sorbenty nie wymagają regeneracji, na przykład mogą być po procesie adsorpcji spalone, zeszkliwione, kompostowane etc. W artykule przedstawiono przegląd wykorzystania tanich sorbentów w zastosowaniu do usuwania zanieczyszczeń z wody. Zaprezentowano usuwanie jonów metali ciężkich, barwników oraz węglowodorów przy wykorzystaniu naturalnych sorbentów. W pracy omówiono równowagę, kinetykę oraz dynamikę sorpcji na podstawie danych literaturowych i wyników badań własnych.
The search for new low-cost sorbents for sorption is an important issue extensively analyzed by the world leading research centers in the last few years. This includes heavy metal ions, dyes, phenols and their derivatives, hydrocarbons, etc. The essence of the problem is to replace expensive traditional sorbents by means of low-cost ones which are often produced from waste materials. Evaluation of the effectiveness of these natural sorbents requires carrying out experiments on specific group of compounds and a selected sorbent. Low-cost sorbents do not require regeneration of sorbents as it may be, for example burnt in incinerators where exhaust gases mast must be treated at appropriate level. This paper presents an overview of the application of low cost sorbents to remove contaminants from water. The manuscript includes the removal of heavy metal ions, dyes, hydrocarbons, etc using low cost adsorbents. In the paper equilibrium, kinetics and dynamics of sorption are evaluated based on literature data and our own research.
Źródło:
Proceedings of ECOpole; 2014, 8, 1; 189-194
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Globalne ocieplenie : natura czy działalność człowieka?
Global warming : nature or human activity?
Autorzy:
Kamiński, W.
Tomczak, E.
Powiązania:
https://bibliotekanauki.pl/articles/2070971.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dwutlenek węgla
para wodna
energia słoneczna
ocieplenie globalne
zmiany klimatu
carbon dioxide
water vapour
solar energy
global warming
climate changes
Opis:
Na ile aktywność człowieka może wpłynąć na zjawiska globalne? Oszacowano naturalne zasoby CO2 w atmosferze i w wodach morskich i porównano z wytwarzanymi przez człowieka. Przedyskutowano wpływ pary wodnej na efekt cieplarniany. Porównano ilości energii dostarczanej ze Słońca do powierzchni Ziemi z ilością energii wytwarzanej przez człowieka. Stwierdzono, że działalność człowieka nie ma istotnego znaczenia w skali globalnej. Siły natury, aktywność Słońca, naturalne długofalowe cykle klimatyczne są sprawcami zmian globalnych.
How man's activity can affect global phenomena? Natural resources of CO2 in atmosphere and water were estimated using mathematical relations and were compared to natural resources resulting from air composition and solubility of CO2 in sea and ocean water. The meaning of water vapour in air was discussed. The amount of radial energy reaching the Earth surface was compared with the energy produced by man. It was found that man's activity could not have a significant effect on the global scale. Nature forces, the Sun's activity and natural climatic long-term cycles instigate global changes.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 1; 55-56
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie kinetyki sorpcji z zastosowaniem pochodnych ułamkowych dla układu barwnik azowy - sorbent roślinny
Sorption kinetics modeling using fractional derivatives for the azo dye - biosorbent system
Autorzy:
Tomczak, E.
Kamiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/2072158.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kinetyka adsorpcji
pochodna ułamkowa
biosorbent
barwniki azowe
adsorption kinetics
fractional derivative
azo dyes
Opis:
W pracy przedstawiono za pomocą równań różniczkowych ułamkowych opis kinetyki sorpcji barwnika azowego Direct Orange 26 na słomie żytniej. W procedurze obliczeniowej wykorzystano metodę numeryczną rozwiązywania równań różniczkowych. Proponowane równanie kinetyki ma trzy parametry: ułamek pochodnej a, stałą kinetyczną K i rząd równania n. Stwierdzono, że sorpcja barwnika dla najwyższego stężenia wynosi 22 mg/g suchego produktu. Można zatem ten odpadowy produkt polecić jako tani sorbent mogący służyć do separacji substancji barwnych z roztwo¬rów wodnych.
The description of sorption kinetics of Direct Orange 26 azo dye on rye straw by means fractional differential equations was presented in the paper. The numerical method for solving differential equations was used in calculations. The proposed kinetics equation represents a three-parameter equation: a - derivative fraction, K - kinetic constant, and n - equation order. It was found that the dye sorption for the highest concentration is equal to 22 mg/g of dry product. Therefore, this waste product can be recommended as inexpensive sorbent that could be used for the separation of colored substances from aqueous solutions.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 4; 376--377
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie odnowień sosny zwyczajnej powstałych z siewu i sadzenia w różnych terminach
Comparing Scots pine regeneration established by sowing and planting at various times of year
Autorzy:
Barzdajn, W.
Kowalkowski, W.
Tomczak, R.
Powiązania:
https://bibliotekanauki.pl/articles/1290847.pdf
Data publikacji:
2019
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
lesnictwo
hodowla lasu
odnowienia lasu
drzewa lesne
sosna zwyczajna
Pinus sylvestris
odnowienia z siewu
odnowienia przez sadzenie
wzrost roslin
zageszczenie roslin
methods of forest regeneration
pine growth
density
Opis:
The aim of this study was to evaluate the practical feasibility of two forest regeneration methods using Scots pine Pinus sylvestris L. To this end, comparative experiments were established in the Złotoryja and Legnica Forest Districts. The site in Złotoryja had been clear cut, while the experimental plot in Legnica was established at a location damaged by wind in 2009 and cleared from wind throws and wind-broken trees before the experiment. Four different dates for sowing and two for planting were chosen in order to investigate the potential forest regeneration with respect to time. Both experiments were established according to the same design: a complete random block design with five replication blocks. To each plot we applied approximately 53 g (1.2 kg/ha) of seeds and planted 230 seedlings (10 200 seedlings/ha). In 2017, the height of the pine trees was recorded and their increment in height was measured in 2016 as well as 2017. A preliminary analysis of results was conducted using ANOVA for multiple experiments in order to identify significant differences and to then combine variables to form homogeneous groups to which the Duncan multiple range test could be applied. For growth traits, the ANOVA showed significant differences between experimental sights as well as a significant interaction of factors with the experimental site. In terms of planting, April was the most advantageous resulting in the greatest tree height in both forest districts, while in the Legnica Forest District the saplings planted in April also showed the greatest annual increments. Among the sowing dates, the most advantageous was the winter sowing, while the April sowing date produced the least desirable results. In conclusion, both sowing and planting are effective methods to establish pine cultures in coniferous forest. Furthermore, both methods may be performed at the currently recommended spring date, but they may also be postponed to summer and winter dates provided favorable weather conditions prevail.
Źródło:
Leśne Prace Badawcze; 2019, 80, 3
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane elementy budowy makrostrukturalnej drewna a dojrzalosc sosny zwyczajnej [Pinus sylvestris L.] wyroslej w warunkach gruntow porolnych
Correlation between selected elements of wood macrostructure and maturity of Scots pine [Pinus sylvestris L.] growing on post-agricultural land
Autorzy:
Tomczak, A.
Pazdrowski, W.
Jelonek, W.
Powiązania:
https://bibliotekanauki.pl/articles/45661.pdf
Data publikacji:
2009
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
lesnictwo
grunty porolne
drzewa lesne
sosna zwyczajna
Pinus sylvestris
drewno sosnowe
budowa drewna
budowa makroskopowa
sloje przyrostu rocznego
szerokosc
drewno wczesne
drewno pozne
drewno bielu
drewno twardzieli
drewno dojrzale
drewno mlodociane
Źródło:
Leśne Prace Badawcze; 2009, 70, 4; 373-381
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przebudowa zwodzonych kładek pieszo-rowerowych – wybrane zagadnienia
Reconstruction of moveable footbridges – selected problems
Autorzy:
Mossor, K.
Tomczak, B.
Wawrzyniak, W.
Powiązania:
https://bibliotekanauki.pl/articles/383581.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
mosty zwodzone
kładki dla pieszych
Opis:
Projektowanie mostów ruchomych, w tym kładek pieszo – rowerowych, wymaga analizy i rozwiązania wielu złożonych, specyficznych problemów. Dotyczy to m.in. takich zagadnień jak posadowienie, mechanizm podnoszenia, trwałość obiektu. Ponadto w celu zapewnienia właściwego mechanizmu uruchamiania kładki konieczna jest współpraca ze specjalistami z dziedziny mechaniki. Istotnym czynnikiem jest też zapewnienie trwałości poszczególnych elementów konstrukcji, zwłaszcza elementów związanych z napędem i ryglowaniem, które zużywają się o wiele szybciej niż inne elementy „klasycznego” mostu. W referacie przedstawiono szczegółowe dane na temat trwałości poszczególnych elementów W przypadku przebudowy pojawia się również często problem istniejących fundamentów, które mogą kolidować z nowym posadowieniem. Dodatkowe trudności mogą wynikać z dostosowania obiektu do otoczenia, jeśli obiekt znajduje się na terenach objętych opieką konserwatorską. W zależności od lokalizacji, uwarunkowań terenowych i możliwości realizacyjnych stosowane są różne systemy konstrukcyjne. Mosty zwodzone w ogólności mogą być projektowane jako obracające się wokół osi poziomej, pionowej lub podnoszone. W artykule zostały opisane jedynie kładki, w których część ruchoma pomostu otwiera się obracając się wokół osi poziomej. W celu ilustracji praktycznego wykorzystania omówionych wymagań związanych z prawidłowym projektowaniem mostów zwodzonych, w referacie przedstawiono trzy przykłady projektów przebudowy i budowy zwodzonych kładek dla pieszych.
The design of moveable bridges for pedestrians and bikes requires an analysis and solution of many complex problems. Important factors are geotechnical issues – laying foundations on weak grounds. It is necessary to fulfill the requirements not only of the ultimate limit state, but also the serviceability limit state for a moveable bridge to function correctly. Moreover, to design the piston mechanism it is vital to cooperate with a mechanical engineer. Another important factor described in the paper is the durability of particular elements of the whole structure, what influences the durability of the bridge. Moveable bridges can be generally divided into three groups: bascule bridges, swing bridges and vertical-lift bridges. In the paper the Authors discussed only a bascule type of bridge, including a detailed description of the lift mechanism. As an example of the discussed problems, the Authors presented a reconstruction design process of three footbridges into pedestrian and bike moveable bridges.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2018, 26; 123-136
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości ręcznego przemieszczania surowca krótkiego podczas pozyskania sosny, świerka, brzozy i buka w cięciach pielęgnacyjnych
Capabilities of manhandling small logs in commercial thinning in pine, spruce, beech, and birch stands
Autorzy:
Tomczak, A.
Grzywiński, W.
Jelonek, T.
Powiązania:
https://bibliotekanauki.pl/articles/986671.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
drzewostany
ciecia pielegnacyjne
sosna
swierk
brzoza
buk
pozyskiwanie drewna
drewno krotkie
drewno sredniowymiarowe
masa drewna
reczne przemieszczanie surowca drzewnego
przemieszczanie ciezarow
health
musculoskeletal symptoms
loggers
weight of logs
green density
Opis:
The aim of this study was to measure the weight of timber obtained from freshly cut trees and compare it with the applicable legal provisions pertaining the capability of transporting heavy loads by hand and also to indicate a problem significant for the occupational safety and health protection of employees working at wood harvesting. In Poland, about 40 million m3 of timber is harvested annually. The logs, with small diameter and length, are prepared for forwarding by arranging them by employees in the so called ‘packages’, which are placed by the route of the machine that collects and transports them to the logging road. Manhandling of the logs is an activity requiring the greatest energy expenditure (over 30 kJ/min) in the process of tree harvesting. Furthermore, it is also one of the key factors, which may lead to the development of musculoskeletal disorders. Regulations existing in the Polish labour law regulate the permitted weight of transported loads depending on the activity duration. For loads transported single−handedly this is 30 kg for a permanent employer, whereas 50 kg for workers doing the job occasionally or temporarily (no more than 4 times per hour and no longer than 4 hours during workday). Logs heavier than 50 kg may be carried only collectively providing the requirements of the minimal length (0,75 m) of the log per one person are met. We produced 2,5 m long logs and weighted them with an accuracy of 0,1 kg. The analysis revealed that approximately 30% of logs weighed between 30 and 50 kg, which introduces limitations in the number of carried logs per one person within a single shift. However, about 10% of the pine, 15% of spruce, 12% of beech and 38% of birch logs were heavier than 50 kg which should prevent carrying them single−handedly. Unfortunately, collective preparation of timber for forwarding is not popular among workers due to reduction in output, and at the same time the lower salary. Even if log for forwarding is prepared by two labourers, they most often work separately. As a result, the limits of the weight carried single− handedly by labourer are notoriously violated and exceeded.
Źródło:
Sylwan; 2018, 162, 07; 531-538
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka wybranych cech morfologicznych drzew w dojrzałych drzewostanach sosnowych eksponowanych na działanie wiatru
Characteristics of selected morphological traits of trees in mature pine stands exposed to the action of wind
Autorzy:
Tomczak, A.
Jelonek, T.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/990957.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
drzewostany sosnowe
wiatry
drzewa lesne
sosna zwyczajna
Pinus sylvestris
stabilnosc
cechy morfologiczne
piersnice drzew
wysokosc drzew
wysokosc osadzenia korony
srednica korony
dlugosc korony
wind
tree stability
biometry
scots pine
Opis:
The paper presents variability in morphological traits of trees in mature Scots pine stands exposed to wind. The analysed parameters included breast height diameter, tree height and length, diameter, lateral area and crown base area. Except for the crown base area and crown diameter, values of the other traits increased with an increase in the distance from the edge of the stand. Crown diameter in trees with average exposure to wind was smaller than diameters of trees growing on the edge of the stand (strong exposure) and within the stand (weak exposure).
Źródło:
Sylwan; 2014, 158, 03; 183-191
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wlasciwosci drewna sosny zwyczajnej [Pinus sylvestris L.] na gruntach porolnych w polnocnej Polsce
Selected properties of wood in Scots pine [Pinus sylvestris L.] growing on post-agricultural land in northern Poland
Autorzy:
Jelonek, T.
Pazdrowski, W.
Tomczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/45924.pdf
Data publikacji:
2009
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
lesnictwo
grunty porolne
zalesianie
drzewa lesne
sosna zwyczajna
Pinus sylvestris
drewno sosnowe
gestosc drewna
wytrzymalosc na sciskanie wzdluz wlokien
wzmocnienie desorpcyjne
Źródło:
Leśne Prace Badawcze; 2009, 70, 3; 277-286
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie pochodnych ułamkowych do matematycznego opisu kinetyki sorpcji dla układu sorbent roślinny - jony metali ciężkich
Application of fractional derivatives for mathematical description of sorption kinetics in the plant sorbent - heavy metal ions system
Autorzy:
Tomczak, E.
Kamiński, W.
Szczerkowska, D.
Powiązania:
https://bibliotekanauki.pl/articles/126301.pdf
Data publikacji:
2013
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
równania różniczkowe ułamkowe
biosorbent
metale ciężkie
fractional derivatives
biosorbents
heavy metal ions
Opis:
W pracy wykorzystano łuskę gryki do procesu sorpcji jonów metali ciężkich Cu(II), Ni(II), Zn(II), Co(II) i Cd(II) z roztworów wodnych. Wyznaczone zostały maksymalne pojemności sorpcyjne oraz stałe kinetyczne i równowagowe. Obliczone wartości pozwoliły na zastosowanie równań różniczkowych ułamkowych do opisu kinetyki sorpcji oraz uzyskania uogólnionego równania kinetyki sorpcji. Opracowanie wyników według tej koncepcji wymaga napisania procedury obliczeniowej wykorzystującej funkcje gamma oraz szeregi nieskończone. Równania kinetyki z wykorzystaniem pochodnych ułamkowych są równaniami o dwóch parametrach. Są to ułamek pochodnej i stała kinetyczna zależne od analizowanego układu sorbent - adsorbat.
Buckwheat husk for sorption of heavy metal ions Cu(II), Ni(II), Zn(II), Co(II) and Cd(II) from aqueous solutions was presented in the paper. The maximum sorption capacity and kinetics and equilibrium constants were determined. Calculated values were used to describe sorption kinetics by means of fractional derivatives. The calculations were carried out using gamma functions and the infinite series. Two parameters equation was obtained. These parameters are a fraction of a derivative and a kinetics constant depend on the analyzed system.
Źródło:
Proceedings of ECOpole; 2013, 7, 1; 267-272
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radial variation in modulus of elasticity (MOE) in wood of Scots pine (Pinus sylvestris L.) growing in stands particularly exposed to wind
Promieniowa zmienność modułu sprężystości (MOE) drewna sosny zwyczajnej (Pinus sylestris L.) wyrosłej w drzewostanach szczególnie narażonych na działanie wiatru
Autorzy:
Jelonek, T.
Tomczak, A.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/8021.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 83
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Axial variation in modulus of elasticity (MOE) in wood of Scots pine (Pinus sylvestris L.) growing in stands particularly exposed to wind
Osiwa zmienność modułu sprężystości (MOE) drewna sosny zwyczajnej (Pinus sylvestris L.) wyrosłej w drzewostanach szczególnie narażonych na działanie wiatru
Autorzy:
Jelonek, T.
Tomczak, A.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/9152.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 83
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of genetic algorithms to determine heavy metal ions sorption dynamics on clinoptilolite bed
Autorzy:
Tomczak, E. T.
Kamiński, W. L.
Powiązania:
https://bibliotekanauki.pl/articles/185117.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
algorytm genetyczny
jony metali ciężkich
klinoptylolit
heavy metal ions
clinoptilolite
sorption dynamics
genetic algorithm
Opis:
In the last decade a growing interest was observed in low-cost adsorbents for heavy metal ions. Clinoptilolite is a mineral sorbent extracted in Poland that is used to remove heavy metal ions from diluted solutions. The experiments in this study were carried out in a laboratory column for multicomponent water solutions of heavy metal ions, i.e. Cu(II), Zn(II) and Ni(II). A mathematical model to calculate the metals' concentration of water solution at the column outlet and the concentration of adsorbed substances in the adsorbent was proposed. It enables determination of breakthrough curves for different process conditions and column dimensions. The model of process dynamics in the column took into account the specificity of sorption described by the Elovich equation (for chemical sorption and ion exchange). Identification of the column dynamics consisted in finding model coefficients [beta], KE and Deff and comparing the calculated values with experimental data. Searching for coefficients which identify the column operation can involve the use of optimisation methods to find the area of feasible solutions in order to obtain a global extremum. For that purpose our own procedure of genetic algorithm is applied in the study.
Źródło:
Chemical and Process Engineering; 2012, 33, 1; 103-116
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obciążenie fizyczne na stanowiskach leśniczego i podleśniczego
Physiological workload at forester and deputy forester workstations
Autorzy:
Grzywiński, W.
Jelonek, T.
Tomczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/979590.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
Panstwowe Gospodarstwo Lesne Lasy Panstwowe
stanowiska pracy
stanowisko lesniczego
stanowisko podlesniczego
obciazenia fizyczne
czestosc skurczow serca
wydatek energetyczny
heart rate
energy expenditure
work heaviness
forester
deputy forester
Opis:
The paper presents the study of physiological workload at forester and deputy forester workstations in 62 forest districts located all over Poland. The research was carried out on the sample group of 185 foresters and 167 deputy foresters in the course of one week (Monday−Friday) in each season of the year. The sample group was selected based on the unit’s management difficulty degree and personal job seniority. The measurement of heart rate (HR) was used to assess workers’ physiological workload. HR telemetric measurement was carried out by the means of wireless physical activity monitors ActiGraph GT9X and Polar WearLink H7. Every heart beat was recorded (beat−to−beat). ActiLife v. 6.11 software was used for data anasysis. On the basis of mean HR the value of minute net energy expenditure (NEE) was calculated. The overall mean HR amounted to 85.0 bpm for foresters, and 93.1 bpm for deputy foresters. These values classify work of forester as light, whereas that of deputy forester in the category of moderate work. The similar level of mean HR values was recorded in particular unit’s management difficulty degree and job seniority groups, especially at forester’s position. A higher diversity of HR was noticed in seasons. The mean HR values of foresters and deputy foresters in particular unit’s management difficulty degree and job seniority classes were significantly different (p<0.05), whereas there were not statistically significant differences in HR for these factors at the same workstation. The overall mean minute NEE at forester’s position amounted to 8.2 kJ/min and 11.5 kJ/min at deputy forester’s position. The minute NEE as a derivative of HR differed slightly in unit’s management difficulty degree and job seniority groups. Higher differences of NEE were observed in particular seasons. On the basis of the minute NEE, the energy cost of workshift (8h) was calculated. At the forester workstation it amounted to 4000 kJ (955 kcal) and at deputy forester’s to 5500 kJ (1313 kcal), on average. Energy expenditure classify both workstations in the category of moderate work. At forester’s workstation the highest NEE on the workday was recorded in winter (4560 kJ) and the lowest in summer (3744 kJ), while at deputy forester’s the highest NEE was noticed in spring (5856 kJ) and the lowest in winter (4992 kJ).
Źródło:
Sylwan; 2019, 163, 10; 811-819
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bibobutanol - metody wytwarzania i oczyszczania
Bibobutanol - production and purification methods
Autorzy:
Kamiński, W.
Tomczak, E.
Górak, A.
Powiązania:
https://bibliotekanauki.pl/articles/126878.pdf
Data publikacji:
2010
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biobutanol
odnawialne źródła energii
ciecze jonowe
renewable energy sources
ionic liquids
Opis:
Perspektywa wyczerpania naturalnych zasobów produktów ropopochodnych oraz rosnące ceny tych surowców skłaniają do poszukiwania paliw z odnawialnych źródeł energii, czyli biopaliw. Główna uwaga do tej pory skupiana była na bioetanolu ze względu na dostępność surowców do jego wytwarzania i dobrze opracowane metody wydzielania i oczyszczania. Alkohol butylowy - biobutanol może być traktowany jako potencjalne biopaliwo. Biobutanol jest bardzo atrakcyjnym źródłem energii, gdyż - w przeciwieństwie do bioetanolu - jest niehigroskopijny, nie powoduje korozji i ma większą wartość opałową. Produkcja butanolu może odbywać się w procesie fermentacji zwanej ABE (od aceton, butanol, etanol), przeprowadzanej najczęściej przez bakterie Clostridium acetobutylicum. Podstawowy problem szerszego wykorzystania biobutanolu leży w jego wytwarzaniu z odpowiednią wydajnością, a ta z kolei jest limitowana wydzielaniem butanolu z brzeczki fermentacyjnej. Proces destylacji nie jest w tym przypadku możliwy do realizacji. Klasyczna ekstrakcja wymaga zastosowania cieczy albo palnych, albo toksycznych. W celu wydzielania i oczyszczania biobutanolu proponuje się zastosowanie cieczy jonowych IL. Wykorzystanie cieczy jonowych do ekstrakcji butanolu (usuwania ze środowiska fermentacji) może być zrealizowane albo poprzez bezpośrednie zastosowanie cieczy w bioreaktorze i oddzielenie butanolu na zewnątrz bioreaktora, albo poprzez wyprowadzenie brzeczki fermentacyjnej na zewnątrz bioreaktora i oddzielanie butanolu w kontraktorze membranowym.
The prospect of depletion of natural resources, petroleum products and rising prices of raw materials tend to look for fuels from renewable energy sources and biofuels. The focus so far has been on bioethanol due to the availability of raw materials for its production and well-developed methods for isolation and purification. Butyl alcohol - biobutanol can be regarded as a potential biofuel. Biobutanol is a very attractive energy source because - as opposed to the bioethanol - is non-hygroscopic, does not cause corrosion and has a higher calorific value. Production of butanol may be made by a fermentation process called ABE (from acetone, butanol, ethanol), carried out mostly by the bacterium Clostridium acetobutylicum. The basic problem of wider use of biobutanol lies in its production with sufficient efficiency and this in turn is limited by separation of butanol from fermentation broth. The distillation process is not applicable. The classical extraction requires the use of a flammable or toxic liquid. For separation and purification of biobutanol it is proposed to apply ionic liquids. Use of ionic liquids for the extraction of butanol (to remove from the fermentation environment) can be achieved either through direct application of the liquid in the bioreactor and separation of butanol on the outside of bioreactor or through directing fermentation broth outside the bioreactor and separation of butanol in the membrane contractor.
Źródło:
Proceedings of ECOpole; 2010, 4, 2; 409-411
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane wskaźniki stabilności drzew w drzewostanach sosnowych narażonych na wiatr
Selected indexes of tree stability in wind-exposed pine stands
Autorzy:
Jelonek, T.
Tomczak, A.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/880959.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Leśny Zakład Doświadczalny. Centrum Edukacji Przyrodniczo-Leśnej w Rogowie
Tematy:
lesnictwo
zagrozenia lasu
wiatry
drzewostany sosnowe
stabilnosc drzewostanu
stabilnosc drzew
sosna zwyczajna
Pinus sylvestris
wspolczynnik smuklosci
Źródło:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej; 2014, 16, 2B[39]
1509-1414
Pojawia się w:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wytrzymałość na ściskanie wzdłuż włókien drewna sosny zwyczajnej (Pinus sylvestris L.) z drzewostanów eksponowanych na działanie wiatru
Compressive strength along the grain of Scots pine (Pinus sylvestris L.) wood from wind-exposed stands
Autorzy:
Jelonek, T.
Tomczak, A.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/881995.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Leśny Zakład Doświadczalny. Centrum Edukacji Przyrodniczo-Leśnej w Rogowie
Tematy:
lesnictwo
drzewa lesne
sosna zwyczajna
Pinus sylvestris
obciazenie wiatrem
drewno sosnowe
wytrzymalosc na sciskanie wzdluz wlokien
biomechanika
Źródło:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej; 2014, 16, 2B[39]
1509-1414
Pojawia się w:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Basic density of Scots pine wood-relationships between values calculated at different heights of the trunk
Gęstość umowna drzewna sosny zwyczajnej (Pinus sylvestris L.)-związki pomiędzy wartościami określonymi na różnych wysokościach pnia
Autorzy:
Tomczak, A.
Jelonek, T.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/7388.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 84
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compression strength parallel to grain of Scots pine (Pinus sylvestris L.) wood-relationships between values calculated at different heights of the trunk
Wytrzymałość na ściskanie wzdłuż włókien drewna sosny zwyczajnej (Pinus sylvestris L.)-związki pomiędzy wartościami określonymi na różnych wysokościach pnia
Autorzy:
Tomczak, A.
Jelonek, T.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/8096.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 84
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bending strength of Scots pine wood-relationships between values calculated at different height of the trunk
Wytrzymałość na zginanie statyczne drewna sosny zwyczajnej (Pinus sylvestris L.)-związki pomiędzy wartościami określonymi na róznych wysokościach pnia
Autorzy:
Tomczak, A.
Jelonek, T.
Pazdrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/9065.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 84
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jakość drewna sosny zwyczajnej (Pinus sylvestris L.) II. Naturalne warunki (czynniki) produkcji i ich rola w kształtowaniu jakości drewna
Quality of Scots pine [Pinus sylvestris L.] wood. Part II. Natural conditions [factors] of production and their role in the fluctuations of wood quality
Autorzy:
Tomczak, A.
Pazdrowski, W.
Jelonek, T.
Grzywiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/1009721.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
drewno sosnowe
zmiennosc fenotypowa
czynniki siedliska
czynniki genetyczne
sosna zwyczajna
lesnictwo
jakosc
Pinus sylvestris
drzewa lesne
wood quality
scots pine
genotype
phenotype
natural factors of production
Opis:
Wood structure and properties are determined by genetic, environmental and anthropogenic factors. Genetic factors probably play the most significant role, determining wood value and quality. However, also traits resulting in bigger or lesser extent from growth and development conditions or human activity modify the final effect of timber production. The study is based on literature review and presents the problem of wood quality and the role natural production factors play modifying it.
Źródło:
Sylwan; 2009, 153, 07; 435-441
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies