Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Soiński, M." wg kryterium: Autor


Tytuł:
Inoculation of grey cast iron with master alloys containing strontium and zirconium
Autorzy:
Soiński, M. S.
Jędrecki, P.
Grzesiak, K.
Powiązania:
https://bibliotekanauki.pl/articles/383343.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solidification process
cast iron
inoculation
mechanical properties
proces krzepnięcia
żeliwo szare
właściwości mechaniczne
Opis:
The effectiveness of cast iron inoculation performed by means of three various inoculants: FeSiSr–SYSTR 75 AV, FeSiZr–SYZR 25 AV and Zircinoc was determined. The inoculants were introduced to the cast iron during the pouring of production moulds. Examination of cast iron structure and mechanical properties were carried out for specimens cut out of the collars of the cast valve bodies. It was found that the quantity of eutectic cells increased to the greatest degree if FeSiZr–SYZR 25 AV inoculant was applied in quantities of 0.20% or 0.25%. This inoculant in the mentioned quantities also increases the tensile strength to the greatest degree, rising it to the level of 250-265 MPa.
Źródło:
Archives of Foundry Engineering; 2011, 11, 3 spec.; 195-198
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Comparison of Selected Methods of Graphitizing Inoculation Applied after the Spheroidizing Treatment
Autorzy:
Gunia, P.
Soiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/381150.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
cast iron structure
spheroidization
nodular graphite
graphitizing inoculation
metalografia
struktura żeliwa
sferoidyzacja
grafit sferoidalny
Opis:
The work compares the effectiveness of selected methods of graphitizing inoculation applied after the spheroidization in the slender tundish ladle of 1 Mg capacity. The inoculation was carried out according to the three various options. The first one was performed simply by means of the block of inoculant inserted in the gating system of the mould, the second one started with initial inoculation by the in-stream method during the transfer of metal from the slender ladle to the pouring ladle and was completed with the secondary modification by means of the inoculant insert placed in the mould, the third one consisted in similar initial inoculation by the in-stream method during the transfer of metal from the slender ladle to the pouring ladle followed by the secondary inoculation, again by the in-stream method, applied during the pouring operation. Examination of cast iron structure allowed to find that the best results of inoculation are achieved in the case of inoculation carried out according to the Option III, though in all cases it was possible to produce cast iron of EN-GJS-400-15 grade meeting the demands of the Standard.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2s; 95-99
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of small amounts of aluminium on the spheroidization of cast iron with cerium mischmetal
Autorzy:
Soiński, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/382820.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metalografia
żeliwo
aluminium
sferoidyzacja
wydzielenia grafitu
metallography
cast iron
spheroidization
graphite precipitates
Opis:
The influence of aluminium (added in quantity from about 0.6% to about 2.8%) on both the alloy matrix and the shape of graphite precipitates in cast iron treated with a fixed amounts of cerium mischmetal (0.11%) and ferrosilicon (1.29%) is discussed in the paper. The metallographic examinations were carried out for specimens cut out of the separately cast rods of 20 mm diameter. It was found that the addition of aluminium in the amounts from about 0.6% to about 1.1% to the cast iron containing about 3% of carbon, about 3.7% of silicon (after graphitizing modification), and 0.1% of manganese leads to the occurrence of the ferrite-pearlite matrix containing cementite precipitates in the case of the treatment of the alloy with cerium mischmetal . The increase in the quantity of aluminium up to about 1.9% or up to about 2.8% results either in purely ferrite matrix in this first case or in ferrite matrix containing small amounts of pearlite in the latter one. Nodular graphite precipitates occurred only in cast iron containing 1.9% or 2.8% of aluminium, and the greater aluminium content resulted in the higher degree of graphite spheroidization. The noticeable amount of vermicular graphite precipitates accompanied the nodular graphite.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2; 117-122
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Aluminium on the Spheroidization of Cast Iron Assessed on the Basis of Wedge Test
Autorzy:
Soiński, M. S.
Jakubus, A.
Stradomski, G.
Powiązania:
https://bibliotekanauki.pl/articles/383125.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
cast iron
aluminium
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The paper discusses the influence of aluminium in quantities from about 1.9% to about 4.7% on both the alloy matrix and the shape of graphite precipitates in cast iron spheroidized with cerium mixture (added in the quantity of 0.11%) and inoculated with ferrosilicon (1.29%). The metallographic examinations were carried out for specimens cut out of the wedge test castings (22 mm base width, 120 mm height, 180 mm length) halfway along their length. It was found that the highest susceptibility to graphitization exhibits the cast iron containing about 2.8% Al. The alloy matrices were classified and the degrees of graphite spheroidization were determined. Microscopic observations were carried out along the wedge test casting height at several places, the first distant by 20 mm from the specimen apex, the next ones every 20 mm farther. Precipitates of nodular and vermicular graphite were found in the cast iron structure. The results of examination allow to state that cast iron spheroidized in the way described here is characterised by the degree of spheroidization which increase with an increase in aluminium content within the examined range.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 163-168
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of small amounts of aluminium on the effectiveness of cast iron spheroidization with magnesium
Autorzy:
Soiński, M. S.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/379819.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
aluminium
cast iron
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The influence of aluminium added in amounts of about 1.6%, 2.1%, or 2.8% on the effectiveness of cast iron spheroidization with magnesium was determined. The cast iron was melted and treated with FeSiMg7 master alloy under industrial conditions. The metallographic examinations were performed for the separately cast rods of 20 mm diameter. They included the assessment of the shape of graphite precipitates and of the matrix structure. The results allowed to state that the despheroidizing influence of aluminium (introduced in the above mentioned quantities) is the stronger, the higher is the aluminium content in the alloy. The results of examinations carried out by means of a computer image analyser enabled the quantitative assessment of the considered aluminium addition influence. It was found that the despheroidizing influence of aluminium (up to about 2.8%) yields the crystallization of either the deformed nodular graphite precipitates or vermicular graphite precipitates. None of the examined specimens, however, contained the flake graphite precipitates. The results of examinations confirmed the already known opinion that aluminium widens the range of ferrite crystallization.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3; 80-83
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial Assessment of Abrasive Wear Resistance of Austempered Cast Iron with Vermicular Graphite
Wstępna ocena odporności na ścieranie żeliwa z grafitem wermikularnym hartowanego izotermicznie
Autorzy:
Soiński, M. S.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/351080.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
vermicular graphite
austempering
abrasive wear resistance
żeliwo
grafit wermikularny
odporność na ścieranie
hartowanie izotermiczne
Opis:
The work compares the abrasive wear resistance of cast iron containing vermicular graphite, measured in the as-cast state and after austempering carried out at 290°C, 340°C, or 390°C. Theexaminations were performed by means of the T-01M tribological tester using the pin-on-disc configuration. Specimens used for examinations were taken from the end tabs of the tensile specimens, these being cut out of the test walls of the double-leg keel block test castings. Examinations proved that the austempering process increases the abrasive wear resistance of vermicular cast iron by several times as compared with the as-cast material. A tendency for a slight decrease in abrasive wear with an increase in austempering temperature can be stated. The coefficient of friction took a little higher values for cast iron after thermal treatment than for the as-cast material. The work was completed with roughness examination by means of electron scanning microscopy.
W pracy porównano odporność na ścieranie żeliwa z grafitem wermikularnym w stanie lanym oraz po hartowaniu izotermicznym przeprowadzonym w temperaturach 290°C, 340°C i 390°C. Badaniaodporności na ścieranie przeprowadzono przy użyciu zestawu trybologicznego T-01M typu trzpień-tarcza. Próbki do badań pochodziły z próbek wytrzymałościowych wyciętych ze ścianek badawczych wlewków próbnych w kształcie odwróconej litery „U”. Badania wykazały, że poddanie żeliwa wermikularnego hartowaniu izotermicznemu prowadzi do kilkukrotnego wzrostu odporności tworzywa na ścieranie w porównaniu z żeliwem w stanie lanym. Zaobserwowano niewielki spadek zużycia wraz ze wzrostem temperatury hartowania. Współczynnik tarcia dla żeliwa po obróbce cieplej przybrał nieco większe wartości aniżeli w przypadku żeliwa w stanie lanym. W ramach pracy wykonano także badania chropowatości z wykorzystaniem mikroskopii skaningowej.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 1073-1076
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Aluminium on Graphitization of Cast Iron Treated with Cerium Mixture
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/380446.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
aluminium
graphitization
cerium mixture
żeliwo
grafityzacja
cer
Opis:
The work determined the influence of aluminium in the amount from about 0.6% to about 8% on graphitization of cast iron with relatively high silicon content (3.4%-3.9%) and low manganese content (about 0.1%). The cast iron was spheroidized with cerium mixture and graphitized with ferrosilicon. It was found that the degree of graphitization increases with an increase in aluminium content in cast iron up to 2.8%, then decreases. Nodular and vermicular graphite precipitates were found after the applied treatment in cast iron containing aluminium in the amount from about 1.9% to about 8%. The Fe3AlCx carbides, increasing brittleness and deteriorating the machinability of cast iron, were not found in cast iron containing up to about 6.8% Al. These carbides were revealed only in cast iron containing about 8% Al.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 95-100
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Initial Assessment of Effectiveness of the Impulse Method of Introducing an Inoculant into Cast Iron
Autorzy:
Derda-Ślęzak, A.
Soiński, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/947579.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallurgy
inoculation
hypoeutectic cast iron
pneumatic transport
metalurgia
żeliwo podeutektyczne
transport pneumatyczny
Opis:
An initial assessment of the effectiveness of cast iron inoculation, performed by the method of impulse introducing the master alloy into cast iron, is presented. The experiment was concerned with the hypoeutectic gray cast iron inoculated with either the Alinoc or the Barinoc master alloy by means of an experimental device for pneumatic transportation. Examinations involved pneumatic injection of the powdered inoculant carried in a stream of gaseous medium (argon) into the metal bath held in the crucible of an induction furnace. It was found that the examined process is characterised by both high effectiveness and stability.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1; 29-32
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of Graphite Precipitates in Aluminium Cast Iron Treated with Cerium Mixture
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/381207.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
cast iron
aluminium
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The work determined the influence of aluminium in the amount from about 1% to about 7% on the graphite precipitates in cast iron with relatively high silicon content (3.4% to 3.90%) and low manganese content (about 0.1%). The cast iron was spheroidized with cerium mixture and graphitized with ferrosilicon. The performed treatment resulted in occurring of compact graphite precipitates, mainly nodular and vermicular, of various size. The following parameters were determined: the area percentage occupied by graphite, perimeters of graphite precipitates per unit area, and the number of graphite precipitates per unit area. The examinations were performed by means of computer image analyser, taking into account four classes of shape factor. It was found that as the aluminium content in cast iron increases from about 1.1% to about 3.4%, the number of graphite precipitates rises from about 700 to about 1000 per square mm. For higher Al content (4.2% to 6.8%) this number falls within the range of 1300 – 1500 precipitates/mm2. The degree of cast iron spheroidization increases with an increase in aluminium content within the examined range, though when Al content exceeds about 2.8%, the area occupied by graphite decreases. The average size of graphite precipitates is equal to 11-15 μm in cast iron containing aluminium in the quantity from about 1.1% to about 3.4%, and for higher Al content it decreases to about 6 μm.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 93-98
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of Castings in the World and in Selected Countries from 1999 to 2013
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/383237.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
production of castings
cast iron
cast steel
non-ferrous alloys
produkcja odlewów
żeliwo
staliwo
stopy metali nieżelaznych
Opis:
The paper compares the foundry production in years 1999-2013 on a world scale, in countries counted among the leading producers of castings, and in Poland. Various types of foundry alloys were taken into account. It was found that the position of China – the leader in the world production of castings – was not changed over many years, however China's share in the total production of casting has stabilised at the level of 42-44% during the recent five years. In the analysed period of time Poland increased the share in the world production of castings from 1.07% to about 1.23%, so that Polish production of castings was almost doubled. There is a tendency on the world scale that the grey cast iron fraction in the total production of castings decreases, while an increase occurs as far as spheroidal graphite cast iron, cast steel, and aluminium alloy castings are concerned.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 103-110
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure of Foundry Production in the World and in Poland over the 1974-2013 Period
Autorzy:
Soiński, M. S.
Skurka, K.
Jakubus, A.
Kordas, P.
Powiązania:
https://bibliotekanauki.pl/articles/381277.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
cast iron
cast steel
aluminium alloy
nonferrous alloy
produkcja odlewnicza
żeliwo
staliwo
stop aluminium
stop nieżelazny
Opis:
The paper presents data illustrating the total production of castings in the world and in Poland over the 1974-2013 period. The fractions of basic casting alloys in the total amount of material used for the production of metal castings during the considered period of time were found. It was noticed that the fraction of grey cast iron castings in the total amount of the produced castings decreased significantly over the past 40 years, both on a global scale (from about 65-75% to about 45%) and in Poland (from about 75-80% to about 45-55%). The fraction of SG iron increased considerably, up to about 25% in the world, and up to about 12-16% in Poland. The fraction of malleable became almost negligible (about 1%). The fraction of cast steel took different course in Poland and in the world: it stabilised on a global scale at about 10% in recent years, but dropped down to the level of about 4-7% in Poland. The use of aluminium alloys for the production of casting grew dynamically; their fraction in the total production of casting rose from somewhat less than 4% to almost 15% on a global scale. As far as Poland is considered, this growth was ever more intensive: from about 6-8% to about 25-30% in the 1989-2013 period (the detailed data for the previous period of time are lacking).
Źródło:
Archives of Foundry Engineering; 2015, 15, 2 spec.; 69-76
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Ferritic Nodular Cast Iron Containing About 5-6% Aluminium
Autorzy:
Soiński, M. S.
Kordas, P.
Skurka, K.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/379726.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry material
metallography
Al-alloyed cast iron
spheroidization
graphite precipitates
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
żeliwo stopowe
sferoidyzacja
wydzielenia grafitu
Opis:
The work presents results of investigations concerning the production of cast iron containing about 5-6% aluminium, with the ferritic matrix in the as-cast state and nodular or vermicular graphite precipitates. The examined cast iron came from six melts produced under the laboratory conditions. It contained aluminium in the amount of 5.15% to 6.02% (carbon in the amount of 2.41% to 2.87%, silicon in the amount of 4.50% to 5.30%, and manganese in the amount of 0.12% to 0.14%). After its treatment with cerium mixture and graphitization with ferrosilicon (75% Si), only nodular and vermicular graphite precipitates were achieved in the examined cast iron. Moreover, it is possible to achieve the alloy of pure ferritic matrix, even after the spheroidizing treatment, when both the aluminium and the silicon occur in cast iron in amounts of about 5.2÷5.3%.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 141-146
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trends in the Production of Castings in the World and in Poland in the XXI Century
Autorzy:
Soiński, M. S.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/381362.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
cast iron
cast steel
aluminium alloys
non-ferrous alloys
produkty odlewnicze
żeliwo
staliwo
stopy aluminium
stopy metali nieżelaznych
Opis:
The paper presents data concerning the total production of castings over the 2000-2014 period, both on a global scale, and in Poland. The basic types of casting alloys were taken into account. Changes in the production volume and structure over the period of the analysed 15 years were pointed out with respect to countries leading in foundry production. The topmost position in the world foundry industry is held by China for several years (with almost 45% share in the foundry market), the second place is taken by India (with almost 9% share). A distinct reduction in the shares of the once significant producers of castings, such as USA, Japan, Germany, Russia, Italy, or France, was observed over the 2000-2014 period. Poland had a share of 1.16% in 2000, and of 1.02% in 2014. Comparing the detailed data concerning the years 2000 and 2014, one can see that the fractions of castings made of ductile iron, cast steel, aluminium alloys, or magnesium alloys increase on a global scale, while such alloys as grey cast iron or malleable are in decline.
Źródło:
Archives of Foundry Engineering; 2016, 16, 2; 5-10
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Shock Resistance of Cast Iron with Various Shapes of Graphite Precipitates
Autorzy:
Jakubus, A.
Soiński, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/379522.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
graphite precipitates
thermal shock
żeliwo
wydzielenia grafitu
szok termiczny
Opis:
The influence of a shape of graphite precipitates in cast iron on the thermal shock resistance of the alloy was initially determined. Investigations included the nodular cast iron and the vermicular one, as well as the cast iron containing flake graphite. The thermal shock resistance was examined at a special laboratory stand which allowed for multiple heating and cooling of specimens within the presumed temperature range. The specimens were inductively heated and then cooled in water of constant temperature of about 30°C. There were used flat specimens 70 mm long, 5 mm thick in the middle part, and tapering like a wedge over a distance of 15 mm towards both ends. The total length of cracks generated on the test surfaces of the wedge-shaped parts of specimens was measured as a characteristic value inversely proportional to the thermal shock resistance of a material. The specimens heated up to 500°C were subjected to 2000 test cycles of alternate heating and cooling, while the specimens heated up to 600°C underwent 1000 such cycles. It was found that as the heating temperature rose within the 500-600°C range, the thermal shock resistance decreased for all examined types of cast iron. The research study proved that the nodular cast iron exhibited the best thermal shock resistance, the vermicular cast iron got somewhat lower results, while the lowest thermal shock resistance was exhibited by grey cast iron containing flake graphite.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 121-124
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of the Shape of Graphite Precipitates on the Cast Iron Abrasion Resistance
Autorzy:
Jakubus, A.
Soiński, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/381926.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nodular cast iron
vermicular cast iron
grey cast iron
abrasion resistance
żeliwo sferoidalne
żeliwo wermikularne
żeliwo szare
odporność na ścieranie
Opis:
The paper presents the initial results of investigation concerning the abrasion resistance of cast iron with nodular, vermicular, or flake graphite. The nodular and vermicular cast iron specimens were cut out of test coupons of the IIb type with the wall thickness equal to 25 mm, while the specimens made of grey cast iron containing flake graphite were cut out either of special casts with 20 mm thick walls or of the original brake disk. The abrasion tests were carried out by means of the T-01M tribological unit working in the pin-on-disk configuration. The counterface specimens (i.e. the disks) were made of the JT6500 brand name friction material. Each specimen was abraded over a distance of 4000 m. The mass losses, both of the specimens and of the counterface disks, were determined by weighting. It was found that the least wear among the examined materials was exhibited by the nodular cast iron. In turn, the smallest abrasion resistance was found in vermicular cast iron and in cast iron containing flake graphite coming from the brake disk. However, while the three types of specimens (those taken from the nodular cast iron and from grey cast iron coming either from the special casts or from the brake disk) have almost purely pearlitic matrix (P95/Fe05), the vermicular cast iron matrix was composed of pearlite and ferrite occurring in the amounts of about 50% each (P50/Fe50). Additionally, it was found that the highest temperature at the cast iron/counterface disk contact point was reached during the tests held for the nodular cast iron, while the lowest one occurred for the case of specially cast grey iron.
Źródło:
Archives of Foundry Engineering; 2019, 4; 87-90
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies