Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Senthil Kumar, M." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Thermal Comfort Properties of Bi-Layer Knitted Fabrics
Właściwości termiczne dzianin dwuwarstwowych
Autorzy:
Udaya Krithika, S. M.
Prakash, C.
Sampath, M. B.
Senthil Kumar, M.
Powiązania:
https://bibliotekanauki.pl/articles/232802.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
bi-layer knitted fabric
polyester
comfort
thermal comfort
dzianina dwuwarstwowa
poliester
komfort
komfort termiczny
Opis:
Transmission of sensible and insensible perspiration is an important factor for fabric comfort. Improvement in the thermal comfort properties of knitted fabrics results in the achievement of fabric comfort. In this research, the thermal comfort properties of six bi-layer knitted fabrics were studied. The bi-layer knitted fabrics were made with different combinations of yarn in the inner layer and outer layer. The yarn combinations selected were polyester staple yarn-polyester staple yarn, polyester staple yarn-cotton, cotton-cotton, polypropylene-cotton, micro denier polyester-cotton, and micro denier polyester- micro denier polyester for the inner and outer layers, respectively. To find the thermal comfort properties of the six bi-layer knitted fabrics, an objective fabric test was carried out. The results showed that the bi-layer fabrics made from micro denier polyester, both in the inner and outer layers, exhibit better thermal comfort properties, thereby providing a higher level of comfort; hence, they are preferred for active sportswear. The water vapour permeability, air permeability, thermal resistance and thermal conductivity of the bi-layer knitted fabric made up of micro denier polyester as the outer and inner layer were found to be higher when compared to the other bi-layer structures. The results were discussed together with one – way ANOVA test results at a 0.05 significance level.
Przenoszenie wyczuwalnego i niewyczuwalnego potu jest ważnym czynnikiem zapewniającym komfort użytkowania wyrobu. Poprawa właściwości komfortu termicznego dzianin skutkuje uzyskaniem komfortu użytkowania wyrobu. W pracy zbadano właściwości komfortu termicznego sześciu dwuwarstwowych dzianin. Dzianiny dwuwarstwowe zostały wykonane z różnych kombinacji przędzy w warstwie wewnętrznej i zewnętrznej. Wybrane kombinacje przędzy to: przędza cięta poliestrowo-poliestrowa, przędza odcinkowa poliestrowo-bawełniana, bawełniano-bawełniana, polipropylenowo-bawełniana, mikro denierowy poliester-bawełna i mikro denierowy poliester-poliester odpowiednio dla warstwy wewnętrznej i zewnętrznej. Aby określić właściwości komfortu termicznego sześciu dwuwarstwowych dzianin, przeprowadzono obiektywne testy wyrobów. Wyniki pokazały, że dwuwarstwowe dzianiny wykonane z poliestru mikro denierowego, zarówno w warstwie wewnętrznej, jak i zewnętrznej, wykazują lepsze właściwości komfortu termicznego, zapewniając w ten sposób wyższy poziom komfortu; dlatego są preferowane w produkcji aktywnej odzieży sportowej. Stwierdzono, że przepuszczalność pary wodnej, przepuszczalność powietrza, opór cieplny i przewodność cieplna dzianiny dwuwarstwowej wykonanej z poliestru mikro denierowego jako warstwy zewnętrznej i wewnętrznej są wyższe w porównaniu z innymi strukturami dwuwarstwowymi. Wyniki przeanalizowano za pomoca testu ANOVA na poziomie istotności 0,05.
Źródło:
Fibres & Textiles in Eastern Europe; 2020, 5 (143); 50-55
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Moisture Management Properties of Bi-Layer Knitted Fabrics
Właściwości zarządzania wilgocią w przypadku dzianin dwuwarstwowych
Autorzy:
Udaya Krithika, S. M.
Sampath, M. B.
Jebastin Rajwin, A.
Prakash, C.
Senthil Kumar, M.
Senthil Kumar, P.
Powiązania:
https://bibliotekanauki.pl/articles/1419740.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
moisture management
microdenier polyester
comfort
zarządzanie wilgocią
poliester microdenier
komfort
Opis:
For investigation of the moisture management properties of bi-layer knitted fabrics, a special knitting structure made of the same or different combinations of yarns of cotton, polypropylene, Microdenier polyester and polyester staple fibre on the face and reverse sides fibre was studied. Moisture management properties, which determine the warm-cool feeling, of the fabrics produced were determined and statistical analysis made. The results indicated that the Microdenier polyester (inner) – Microdenier polyester (outer) fabric had a better moisture management property, providing high levels of comfort, and is recommended for summer, active and sportswear. The results were discussed together with one-way ANOVA test results at a 0.05 significance level. The results indicate that the Microdenier poliester yarn inner and outer layer of bi-layer knitted fabric shows a better moisture management property due to its appreciable wetting radius, as well its good absorption rate, wetting time and spreading speed of sweat, thus exhibiting a very higher level of the comfort property.
W celu określenia właściwości zarządzania wilgocią dzianin dwuwarstwowych zbadano specjalną strukturę dzianiny wykonaną z tej samej lub różnych kombinacji przędz bawełnianych, polipropylenowych, poliestrowych mikrodenier i poliestrowych włókien odcinkowych po stronie wierzchniej i spodniej. Określono właściwości odprowadzania wilgoci, które decydują o odczuciu ciepła-chłodu i przeprowadzono analizę statystyczną wyników. Wyniki wykazały, że dzianina poliestrowa Microdenier (wewnętrzna) – poliester Microdenier (zewnętrzna) ma lepsze właściwości odprowadzania wilgoci, zapewniając wysoki poziom komfortu i jest zalecana do stosowania w odzieży letniej, aktywnej i sportowej. Zaprezentowano wyniki jednokierunkowego testu ANOVA na poziomie istotności 0,05. Wyniki wskazały, że wewnętrzna i zewnętrzna warstwa przędzy poliestrowej Microdenier z dwuwarstwowej dzianiny wykazuje lepsze właściwości odprowadzania wilgoci ze względu na znaczny promień zwilżania, a także dobrą szybkość wchłaniania, czas zwilżania i prędkość rozprowadzania potu, a tym samym wykazuje wyższy poziom komfortu.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 2 (146); 81-86
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimisation of the Sublimation Textile Printing Process Using the Taguchi Method
Optymalizacja procesu druku sublimacyjnego na tekstyliach metodą Taguchi
Autorzy:
Kumar, Jeyaraman Anandha
Kumar, M. Senthil
Powiązania:
https://bibliotekanauki.pl/articles/1419905.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
knitted fabric
sublimation printing
experimental design
Taguchi design
water vapour resistance
dzianina
druk sublimacyjny
projekt eksperymentalny
projekt Taguchi
opór pary wodnej
Opis:
In this paper, printing parameters for the sublimation printing of polyester fabrics like the number of strokes, the sublimation paper weight in grams per square metre, the fusing temperature and time were optimised using the Tauguchi experimental design technique. In the evaluations the signal-to-noise ratio was used. Sixteen experiments were performed with respect to the L 16 Orthogonal array design for the Tauguchi approach. The results show a considerable improvement in the signal-to-noise ratio as compared to the initial conditions. Through this study, not only can optimum printing conditions for sublimation printed polyester fabr ics be obtained but also the significant factors that affect water vapour resistance.
W pracy zoptymalizowano, przy użyciu eksperymentalnej techniki projektowania Tauguchi, parametry druku sublimacyjnego tkanin poliestrowych, takie jak: liczba pociągnięć, gramatura papieru sublimacyjnego w gramach na metr kwadratowy, temperatura i czas stapiania. W ocenach wykorzystano stosunek sygnału do szumu. Przeprowadzono 16 eksperymentów w odniesieniu do projektu macierzy ortogonalnej L 16 dla podejścia Tauguchi. Wyniki wskazały na znaczną poprawę stosunku sygnału do szumu w porównaniu z warunkami początkowymi. Dzięki zaprezentowanym badaniom można nie tylko uzyskać optymalne warunki drukowania na tkaninach poliestrowych drukowanych sublimacyjnie, ale także uwypuklić istotne czynniki wpływające na odporność na parę wodną.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 1 (145); 75-79
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Moisture Management Properties of Plated Interlock, Mini Flat Back Rib and Flat Back Rib Structures
Ocena właściwości zarządzania wilgocią w strukturach dziewiarskich
Autorzy:
Sathish Kumar, T.
Ramesh Kumar, M.
Senthil Kumar, B.
Powiązania:
https://bibliotekanauki.pl/articles/1419846.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
eri silk
flat back rib
moisture management
mini flat back rib
plated interlock
jedwab eri
bambus
tencel
odprowadzanie wilgoci
zarządzanie wilgocią
Opis:
Moisture management is a very fundamental criterion for any type of fabric. Hence, in this study three different knits viz plated interlock, mini flat back rib and flat back rib fabric structures with 100% eri silk (top), 100% bamboo (bottom) and 100% tencel (bottom) with the combination of two different yarn counts were used. The yield was tested for moisture management properties. It was identified that the bi-layer eri silk (14.3 tex) combined with bamboo (14.8 tex) and tencel (14.8 tex) plated interlock, mini flat back rib and flat back rib knit structure fabrics were excellent. Due to the high level of comfort and breathable nature, eri silk with bamboo and tencel fabrics are recommended for performance based garments.
Zarządzanie wilgocią jest podstawowym kryterium dla każdego rodzaju wyrobu włókienniczego. W badaniu poddano analizie trzy różne struktury dziewiarskie o różnych splotach i składach takich jak: 100% jedwabiu eri, 100% bambusa i 100% tencel. Uzyskane struktury zbadano pod kątem właściwości zarządzania wilgocią. Stwierdzono, że struktura powstała z dwuwarstwowego jedwabiu eri (14,3 tex) w połączeniu z bambusem (14,8 tex) i tencelem (14,8 tex) daje najlepsze właściwości. Ze względu na wysoki poziom komfortu i oddychalności jedwab eri w połączeniu z bambusem i tencelem jest zalecany do odzieży wymagającej bardzo dobrych właściwości zarządzania wilgocią.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 2 (146); 66-74
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution and Generalized Ulam-Hyers Stability of a Reciprocal Type Functional Equation in Non-Archimedean Fields
Autorzy:
Kumar, B. V. Senthil
Ravi, K.
Rassias, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/1193002.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Generalized Hyers-Ulam stability
Reciprocal function
Reciprocal type functional equation
Opis:
In this paper, we obtain the general solution of a reciprocal type functional equation of the type f(x+y)=f((k_1 x+k_2 y)/k)f((k_2 x+k_1 y)/k)/(f((k_1 x+k_2 y)/k)+f((k_2 x+k_1 y)/k) ) and investigate its generalized Ulam-Hyers stability in non-Archimedean fields where k>2, k_1 and k_2 are positive integers with k=k_1+k_2 and k_1≠k_2. We also establish Hyers-Ulam-Rassias stability, Ulam-Gavruta-Rassias stability and J.M. Rassias stability controlled by the mixed product-sum of powers of norms for the same equation.
Źródło:
World Scientific News; 2016, 31; 48-58
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Study on Mechanical Performances of Circular and Flat Geometry Welds in Friction Stir Welding of Aluminium Alloy
Autorzy:
Senthil, S. M.
Ragu Nathan, Seerangan
Parameshwaran, Rathinasamy
Bhuvanesh Kumar, M.
Powiązania:
https://bibliotekanauki.pl/articles/2049402.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FSW
aluminium pipe
aluminium plate
tensile test
hardness test
Opis:
This study is to find the extent of variation in mechanical properties between plate and pipe welds fabricated out of the same FSW process parameters. Common thickness of 3 mm along with similar tool specifications is used to fabricate the weld. Process parameters of tool rotational speed 2000 rpm and weld speed 94 mm/min that was defined as optimal for pipe weld is used as common process parameters. Welds are analyzed for hardness and tensile properties. Yield strength and ultimate tensile strength varied about 8.1% and 11.2% respectively between plate and pipe welds. The hardness of the stir zones varied about 11.6% between plate and pipe welds.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 881-886
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of a Novel Silver-Based Electrical Contact Composites and Assessment of Its Mechanical and Electrical Properties
Autorzy:
Kumar, Praveen S.
Senthil, S. M.
Parameshwaran, Rathinasamy
Rathanasamy, Rajasekar
Powiązania:
https://bibliotekanauki.pl/articles/2049131.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silver tin oxide
electrical contact
composites
tungsten oxide
conductivity
Opis:
The electrical contactors play a crucial role in closing the circuit in many power distribution components like overhead lines, underground cables, circuit breakers, transformers, and control systems. The failure in these components mainly occurs due to the break-down of contactors due to the continuous opening and closing action of contacts. Silver (Ag)-based oxide contact materials are widely used in practice, among which silver tin oxide (AgSnO2) is most common. An attempt is made in increasing the performance of AgSnO2, by adding Tungsten Oxide (WO3) in various weight proportions, thus finding the optimal proportion of AgSnO2WO3 to have increased mechanical and electrical performances. All the composite samples are fabricated in-house using powder metallurgy process. The assessment of physical and electrical properties namely, density, hardness, porosity, and electrical conductivity, showed that 90%Ag-8.5%SnO2-1.5%WO3 composite yielded superior results. With help of morphological tests, wear characteristics are also investigated, which showed that 90%Ag-8.5%SnO2-1.5%WO2 composite has a wear coefficient of 0.000227 and a coefficient of friction of 0.174 at an optimized load of 10 N and sliding velocity of 0.5 mm/s.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1087-1094
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of tribology parameters of AZ91D magnesium alloy in dry sliding condition using response surface methodology and genetic algorithm
Autorzy:
Beniyel, M.
Sivapragash, M.
Vettivel, S. C.
Senthil Kumar, P.
Ajith Kumar, K. K.
Niranjan, K.
Powiązania:
https://bibliotekanauki.pl/articles/2173540.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
pin-on-disc
tribology
dry condition
optimization
casting
stop magnezu
trybologia
stan suchy
optymalizacja
odlew
Opis:
In the present research, the wear behaviour of magnesium alloy (MA) AZ91D is studied and optimized. MA AZ91D is casted using a die-casting method. The tribology experiments are tested using pin-on-disc tribometer. The input parameters are sliding velocity (1‒3 m/s), load (1‒5 kg), and distance (0.5‒1.5 km). The worn surfaces are characterized by a scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS). The response surface method (RSM) is used for modelling and optimising wear parameters. This quadratic equation and RSM-optimized parameters are used in genetic algorithm (GA). The GA is used to search for the optimum values which give the minimum wear rate and lower coefficient of friction. The developed equations are compared with the experimental values to determine the accuracy of the prediction.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; art. no. e135835
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of tribology parameters of AZ91D magnesium alloy in dry sliding condition using response surface methodology and genetic algorithm
Autorzy:
Beniyel, M.
Sivapragash, M.
Vettivel, S. C.
Senthil Kumar, P.
Ajith Kumar, K. K.
Niranjan, K.
Powiązania:
https://bibliotekanauki.pl/articles/2090729.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
pin-on-disc
tribology
dry condition
optimization
casting
stop magnezu
trybologia
stan suchy
optymalizacja
odlew
Opis:
In the present research, the wear behaviour of magnesium alloy (MA) AZ91D is studied and optimized. MA AZ91D is casted using a die-casting method. The tribology experiments are tested using pin-on-disc tribometer. The input parameters are sliding velocity (1‒3 m/s), load (1‒5 kg), and distance (0.5‒1.5 km). The worn surfaces are characterized by a scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS). The response surface method (RSM) is used for modelling and optimising wear parameters. This quadratic equation and RSM-optimized parameters are used in genetic algorithm (GA). The GA is used to search for the optimum values which give the minimum wear rate and lower coefficient of friction. The developed equations are compared with the experimental values to determine the accuracy of the prediction.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; e135835, 1--10
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies