Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sadowski, L." wg kryterium: Autor


Tytuł:
Non-destructive testing and analysis of a XIX-century brick masonry building
Autorzy:
Hoła, A.
Sadowski, Ł.
Szymanowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1849725.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mur ceglany
budynek murowany
XIX w.
pęknięcie ściany
ugięcie sufitu
wilgoć nadmierna
badanie nieniszczące
brick masonry
masonry building
19th century
wall crack
ceiling deflection
excessive dampness
nondestructive testing
Opis:
The article presents the results of non-destructive testing and analyses carried out for a brick masonry building from the 19th century, which has many irregularities that involve a lack of inspections and tests of its technical condition for many years, as well as a failure to carry out necessary repairs. The conducted organoleptic tests enabled the most significant building damage to be indicated, and its causes were determined on the basis of the results of non-destructive tests and analyses. These causes include mainly wall cracks, ceiling deflections and excessive dampness. It also contains the relationships, which were developed using non-destructive dielectric and resistive methods when testing the moisture content of the brick walls. These results may be useful for other researchers dealing with brick masonry buildings from a similar period of time. The authors' intention was to present the existing poor technical condition of the brick masonry building and indicate its causes, as well as to present that a lack of appropriate maintenance can lead to a situation in which the life or health of residents is threatened.
Źródło:
Archives of Civil Engineering; 2020, 66, 4; 201-219
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problem wielkoskalowego podejścia do oceny zespolenia warstw betonowych
A problem of a multi-scale approach of the assessment of interlayer bond between concrete layers
Autorzy:
Hoła, J.
Sadowski, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/2068006.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska
Tematy:
zespolenie warstw
podkład betonowy
zaprawa cementowa
layer bonding
concrete primer
cement mortar
Opis:
W artykule przedstawiono problem wieloskalowego podejścia do oceny zespolenia warstw betonowych. Zaprezentowano możliwości zastosowania dostępnych nowoczesnych metod badawczych do oceny struktury betonu w strefie zespolenia w zależności od poziomu obserwacji. Zdefiniowano w pracy te poziomy. Przedstawiono również przykładowe rezultaty badań obrazujące wieloskalowe podejście do oceny struktury betonu w strefie zespolenia warstw.
This article presents a problem of a multi-scale approach of the assessment of interlayer bond between concrete layers. The possibilities of applications of available modern measurement methods of the evaluation of the structure of the concrete within the interphase at different observation length scales have been presented. These scales have been defined in this study. Exemplary test results of this evaluation have been also presented in the article.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2017, 23 (173); 116-125
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wybranych kwarcowych dodatków mineralnych modyfikujących beton warstwy wierzchniej na jego zespolenie z podkładem betonowym
Effect of selected quartz mineral admixtures applied in added concrete on their adhesion to concrete substrate
Autorzy:
Sadowski, Ł.
Hoła, J.
Powiązania:
https://bibliotekanauki.pl/articles/2065419.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska
Tematy:
beton
dodatki mineralne
zespolenie warstw
przyczepność przy odrywaniu
concrete
mineral admixtures
interlayer bond
pull-off adhesion
Opis:
W pracy dokonano na drodze badawczej oceny wpływu wybranych kwarcowych dodatków mineralnych modyfikujących beton warstwy wierzchniej na jego zespolenie z podkładem betonowym. Dodatkami tymi były mączka kwarcowa oraz skaleniowo-kwarcowa stosowane w różnej ilości w stosunku do masy cementu. Badania zespolenia warstw wykonane metodą pull-off wykazały, że mączka skaleniowo- kwarcowa wpływa zdecydowanie niekorzystnie na to zespolenie.
Based on performed research in this paper the evaluation of the effect of selected quartz mineral admixtures applied in added concrete on their adhesion to concrete substrate was presented. These admixtures were quartz and feldspar-quartz mineral used in varying amounts relative to the weight of cement. Research performed by pull-off method presents that feldspar-quartz mineral powder definitely affects adversely on that adhesion.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2017, 1 (19); 21--26
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of misfit strain in (Ga,Mn)(Bi,As) epitaxial layers on their magnetic and magneto-transport properties
Autorzy:
Levchenko, K.
Andrearczyk, T.
Domagała, J.
Sadowski, J.
Kowalczyk, L.
Szot, M.
Figielski, T.
Wosiński, T.
Powiązania:
https://bibliotekanauki.pl/articles/1160667.pdf
Data publikacji:
2016-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
61.05.cp
78.20.Ls
73.50.Jt
75.30.Gw
Opis:
Effect of misfit strain in the layers of (Ga,Mn)(Bi,As) quaternary diluted magnetic semiconductor, epitaxially grown on either GaAs substrate or (In,Ga)As buffer, on their magnetic and magneto-transport properties has been investigated. High-resolution X-ray diffraction, applied to characterize the structural quality and misfit strain in the layers, proved that the layers were fully strained to the GaAs substrate or (In,Ga)As buffer under compressive or tensile strain, respectively. Ferromagnetic Curie temperature and magneto-crystalline anisotropy of the layers have been examined by using magneto-optical Kerr effect magnetometry and low-temperature magneto-transport measurements. Post-growth annealing treatment of the layers has been shown to enhance the hole concentration and the Curie temperature in the layers.
Źródło:
Acta Physica Polonica A; 2016, 129, 1a; A-90-A-93
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fungal pathogens and antagonists in root-soil zone in organic and integrated systems of potato production
Autorzy:
Lenc, L.
Kwasna, H.
Jeske, M.
Jonczyk, K.
Sadowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/66844.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fungal pathogen
antagonist
root
soil
organic system
integrated system
potato
biological control
cropping system
fungi
Oomycota
Opis:
Occurrence of culturable Fungi and Oomycota in root-soil habitat of potato cv. Owacja in organic and integrated production systems at Osiny (northern Poland) was compared in 2008–2010. The densities of both pathogens were significantly greater in the organic system. The eudominant fungal taxa (with frequency > 10% in at least one habitat) included species of Fusarium + Gibberella + Haematonectria, Penicillium, Phoma and Trichoderma. The dominant taxa (with frequency 5–10%) included species from 13 genera. In the rhizoplane, rhizosphere and non-rhizosphere soil, the total density of potential pathogens was greater in the integrated system, and of potential antagonists in the organic system. Among eudominant and dominant pathogens, Fusarium oxysporum and Gibellulopsis nigrescens occurred at greater density in the integrated system and Haematonectria haematococca and Phoma spp. in the organic system. Among eudominant antagonists, Trichoderma species occurred at greater density in the organic system. The organic system provided more disease suppressive habitat than the integrated system. The occurrence of brown leaf spot and potato blight was however similar in both systems. The mean yield of organic potatoes (24.9 t · ha–1) was higher than the mean organic potato yield in Poland (21.0 t · ha–1) and similar to the mean in other European countries (Germany 25.1 t · ha–1, Great Britain 25.0 t · ha–1). The organic system, based on a 5-year rotation, with narrow-leafed lupin, white mustard and buckwheat as a cover crop, inorganic fertilization based on ground rock phosphate + potassium sulphate, and biological and chemical control of insects and diseases (Bacillus thuringiensis ssp. tenebrionis + copper hydroxide + copper oxychloride), may be recommended for use in central Europe.
Źródło:
Journal of Plant Protection Research; 2016, 56, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurements of fast electron beams and soft X-ray emission from plasma-focus experiments
Autorzy:
Surała, W.
Sadowski, M. J.
Kwiatkowski, R.
Jakubowski, L.
Żebrowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/147850.pdf
Data publikacji:
2016
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron beams
X-ray emission
plasma focus
hot spots
Opis:
The paper reports results of the recent experimental studies of pulsed electron beams and soft X-rays in plasma-focus (PF) experiments carried out within a modifi ed PF-360U facility at the NCBJ, Poland. Particular attention was focused on time-resolved measurements of the fast electron beams by means of two different magnetic analyzers, which could record electrons of energy ranging from about 41 keV to about 715 keV in several (6 or 8) measuring channels. For discharges performed with the pure deuterium fi lling, many strong electron signals were recorded in all the measuring channels. Those signals were well correlated with the fi rst hard X-ray pulse detected by an external scintillation neutron-counter. In some of the analyzer channels, electron spikes (lasting about dozens of nanoseconds) and appearing in different instants after the current peculiarity (so-called current dip) were also recorded. For several discharges, fast ion beams, which were emitted along the z-axis and recorded with nuclear track detectors, were also investigated. Those measurements confi rmed a multibeam character of the ion emission. The time-integrated soft X-ray images, which were taken side-on by means of a pinhole camera and sensitive X-ray fi lms, showed the appearance of some fi lamentary structures and so-called hot spots. The application of small amounts of admixtures of different heavy noble gases, i.e. of argon (4.8% volumetric), krypton (1.6% volumetric), or xenon (0.8% volumetric), decreased intensity of the recorded electron beams, but increased intensity of the soft X-ray emission and showed more distinct and numerous hot spots. The recorded electron spikes have been explained as signals produced by quasi-mono-energetic microbeams emitted from tiny sources (probably plasma diodes), which can be formed near the observed hot spots.
Źródło:
Nukleonika; 2016, 61, 2; 161-167
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimizing of target detection and tracking processes realized on consoles of passive sonar with linear towed antenna
Autorzy:
Raganowicz, A.
Sadowski, K.
Dolot, M.
Kilian, L.
Powiązania:
https://bibliotekanauki.pl/articles/332562.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
passive ASW sonar
imaging
detection
tracking
Opis:
The long-range passive towed sonar was first modernised a few years ago. Building on operator experience over that period, a concept was developed of optimising the tasks performed by sonar operators, and improving forms of imaging to inform about object detection and support object tracking. The concept was implemented and successfully tested during ships’ manoeuvres. The optimisation of operator tasks was designed to keep listening for signals from an object separate from object tracking. Operator tasks have been made easier by rearranging the imaging, improving interaction between monitors, extending the navigation imagery module, adding new tools for building an acoustic database of potential targets; and improving the recording, browsing and playback of key recorded data. The article gives a more detailed account of the project and its results.
Źródło:
Hydroacoustics; 2016, 19; 329-334
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large Area Concrete Surface Topography Measurements Using Optical 3D Scanner
Autorzy:
Majchrowski, R.
Grzelka, M.
Wieczorowski, M.
Sadowski, Ł.
Gapiński, B.
Powiązania:
https://bibliotekanauki.pl/articles/221494.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
3D surface metrology
concrete
optical method
roughness
topography measurement
Opis:
The paper presents examinations of the surface of base concrete with a 3D scanner. Two base concrete surfaces, differently prepared, were examined, together with two measurement strategies: simple and fast 3D scanning and partial scanning in selected areas corresponding to the device measurement space. In order to complete the analysis of a concrete surface topography an original Matlab-based program TAS (Topography Analysis and Simulation) was developed for both 2D and 3D surface analyses. It enables data processing, calculation of parameters, data visualization and digital filtration.
Źródło:
Metrology and Measurement Systems; 2015, 22, 4; 565-576
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-destructive and semi-destructive diagnostics of concrete structures in assessment of their durability
Autorzy:
Hoła, J.
Bień, J.
Sadowski, Ł.
Schabowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/199847.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
concrete
durability
diagnostics
non-destructive tests
semi-destructive tests
trwałość betonu
diagnostyka
testy niedestrukcyjne
testy pół-destrukcyjne
Opis:
This paper proposes a comprehensive classification of test methods for the diagnosis of concrete structures. The main focus is on the ranges of suitability of the particular methods and techniques for assessing the durability of structures, depending on the principal degradation mechanisms and their effects on this durability. The survey covers non-destructive testing (NDT) methods, which do not in any way breach the integrity of the tested structures, and semi-destructive testing (SDT) methods requiring material samples to be taken or any other minor breach of structural integrity. An original taxonomy of physical, chemical and biological diagnostic methods, useful in assessment of concrete structures durability, is proposed. Equipment specific for selected advanced testing methods is presented as well as exemplary test results.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 1; 87-96
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Postępy budowy specjalnych interfejsów operatora robota chirurgicznego Robin Heart
Autorzy:
Mucha, Ł.
Rohr, K.
Lis, K.
Lehrich, K.
Kostka, P.
Sadowski, W.
Krawczyk, D.
Kroczek, P.
Małota, Z.
Nawrat, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2063845.pdf
Data publikacji:
2015
Wydawca:
Międzynarodowe Stowarzyszenie na rzecz Robotyki Medycznej
Tematy:
sterowanie telemanipulatorów
zadajnik ruchu
system haptyczny
haptic device
manipulator chirurgiczny
RobinHend
sterowanie robotem
FRK
Robin Heart
control of telemanipulators
motion setter
haptic system
surgical manipulator
robot control
Opis:
Praca stanowi przegląd oryginalnych systemów zadawania ruchu opracowanych dla polskiego robota chirurgicznego Robin Heart. Najnowsze, oryginalne rozwiązanie kontroli robota chirurgicznego Robi Heart – haptyczny zadajnik ruchu – pozwala na sprawne i z wyczuciem siły 3D sterowanie narzędziami robota.
Źródło:
Medical Robotics Reports; 2015, 4; 49--55
2299-7407
Pojawia się w:
Medical Robotics Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reprocessability of molybdenum and magnesia based inert matrix fuels
Autorzy:
Ebert, E. L.
Bukaemskiy, A.
Sadowski, F.
Lange, S
Wilden, A.
Modolo, G.
Powiązania:
https://bibliotekanauki.pl/articles/148138.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
CERCER
CERMET
dissolution
inert matrix fuels (IMF)
liquid-liquid extraction
minor actinides
reprocessing
Opis:
This work focuses on the reprocessability of metallic 92Mo and ceramic MgO, which is under investigation for (Pu,MA)-oxide (MA = minor actinide) fuel within a metallic 92Mo matrix (CERMET) and a ceramic MgO matrix (CERCER). Magnesium oxide and molybdenum reference samples have been fabricated by powder metallurgy. The dissolution of the matrices was studied as a function of HNO3 concentration (1–7 mol/L) and temperature (25–90°C). The rate of dissolution of magnesium oxide and metallic molybdenum increased with temperature. While the MgO rate was independent of the acid concentration (1–7 mol/L), the rate of dissolution of Mo increased with acid concentration. However, the dissolution of Mo at high temperatures and nitric acid concentrations was accompanied by precipitation of MoO3. The extraction of uranium, americium, and europium in the presence of macro amounts of Mo and Mg was studied by three different extraction agents: tri-n-butylphosphate (TBP), N,N'-dimethyl-N,N'-dioctylhexylethoxymalonamide (DMDOHEMA), and N,N,N’,N’- -tetraoctyldiglycolamide (TODGA). With TBP no extraction of Mo and Mg occurred. Both matrix materials are partly extracted by DMDOHEMA. Magnesium is not extracted by TODGA (D < 0.1), but a weak extraction of Mo is observed at low Mo concentration.
Źródło:
Nukleonika; 2015, 60, No. 4, part 2; 871-878
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Robin Heart Force Feedback/Control System Based on INCITE Sensors - preliminary study
Autorzy:
Rohr, K.
Fürjes, P.
Mucha, Ł.
Radó, J.
Lis, K.
Dücső, C.
Sadowski, W.
Foldesy, P.
Krawczyk, D.
Kroczek, P.
Małota, Z.
Szebényi, G.
Nawrat, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2063850.pdf
Data publikacji:
2015
Wydawca:
Międzynarodowe Stowarzyszenie na rzecz Robotyki Medycznej
Tematy:
force sensors
surgical tools
medical robotics
force feedback
czujniki siły
narzędzia chirurgiczne
robotyka medyczna
siłowe sprzężenie zwrotne
Opis:
The subject aim of the this work is the investigation studying of applicability of 3D MEMS based force micro-sensors made by 3D MEMSmicromachining technology and use it as micro-joystick to control the position of robot Robin Heart PVA. Since the robot moves with 5 degrees of freedom to run utilise all the possibilities of movement is done available by the use of the switching clutch control object. By pressing the in appropriate mode (way) the sensor provides the ability to control the functions of the spherical robot (at different speeds): to lean forward or sideways or alternatively to penetrate or withdrow withdraw and to rotate of the tool axis is possible. The sensor was fastened in its special of the surgical tool. An Applicability of appropriate control system equipped with a new this novel sensor was investigated in and a comparison with to the control using the classic remote control methods was investigated. Preliminary tests of laparoscope integrated force sensors were also investigated accomplished to provide additional on-line information for the surgeron during operation.
Przedmiotem pracy jest wykonanie czujnika siły 3D wg technologii MEMs i zastosowanie go jako mikrodżojstika siłowego do sterowania położeniem robota Robin Heart PVA. Ponieważ robot posiada 5 stopni swobody uruchomienie wszystkich możliwości ruchu jest wykonane przez zastosowanie sprzęgła przełączającego obiekt sterowania. Poprzez odpowiednie naciśnięcie czujnika uzyskujemy możliwość sterowania funkcjami tego sferycznego robota (z różną prędkością): pochylenie do przodu lub w bok lub alternatywnie wsuw/wysuw liniowy i obrót narzędzia wokół osi. Wykonano specjalny projekt umieszczenia czujnika w odpowiednim uchwycie mocowanym do narzędzia chirurgicznego. Wykonano odpowiedni system sterowania z nowym czujnikiem i dokonano porównania ze sterowaniem za pomocą klasycznego pilota.
Źródło:
Medical Robotics Reports; 2015, 4; 10--17
2299-7407
Pojawia się w:
Medical Robotics Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The metrology of ground concrete surfaces morphology with 3D laser scanner
Autorzy:
Sadowski, L.
Mathia, T. G.
Powiązania:
https://bibliotekanauki.pl/articles/407237.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
concrete
metrology
morphology
3D laser scanner
grinding
roughness parameters
Opis:
This paper is devoted to machining of concrete by grinding and the metrology of its surface morphologies. The surface morphology is still open problem from metrological as well as mathematical morphology points of views. In order to understand better abrasive process the raw morphologic state is compared with the ground concrete surfaces. The most significant results are presented in the form of profiles, 3D isometric views and isotropy analysis. Several 3D surface roughness parameters were calculated.
Źródło:
Management and Production Engineering Review; 2015, 6, 2; 40-44
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
TS-BTPhen as a promising hydrophilic complexing agent for selective Am(III) separation by solvent extraction
Autorzy:
Kaufholz, P.
Sadowski, F.
Wilden, A.
Modolo, G.
Lewis, F. W.
Smith, A. W.
Harwood, L. M.
Powiązania:
https://bibliotekanauki.pl/articles/147226.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
Am-Cm separation
TODGA
TS-BTPhen
liquid-liquid extraction
Opis:
The novel hydrophilic back-extraction agent TS-BTPhen (3,3',3'',3'''-[3-(1,10-phenanthroline-2,9- -diyl)-1,2,4-triazine-5,5,6,6-tetrayl]tetrabenzenesulfonic acid) was tested for its selectivity towards Am(III) over Cm(III) and Eu(III) with a TODGA (N,N,N',N'-tetraoctyldiglycolamide) based solvent. Batch experiments were carried out using TS-BTPhen dissolved in aqueous nitric acid solution with tracers of 152Eu, 241Am and 244Cm. A signifi cant increase of the separation factor for Cm over Am from SFCm/Am = 1.6 up to SFCm/Am = 3.3 was observed compared to the use of a TODGA-nitric acid system alone. Furthermore, stripping was possible at high nitric acid concentrations (0.6–0.7 mol/L) resulting in a low sensitivity to acidity changes. The infl uence of the TS-BTPhen concentration was analyzed. A slope of –2 was expected taking into account literature stoichiometries of the lipophilic analogue CyMe4BTPhen. However, a slope of –1 was found. Batch stripping kinetics showed fast kinetics for the trivalent actinides. As an alternative organic ligand the methylated TODGA derivate Me-TODGA (2-methyl-N,N,N',N'-tetraoctyldiglycolamide) was tested in combination with the hydrophilic TS-BTPhen. The Am(III) separation was achieved at even higher nitric acid concentrations compared to TODGA.
Źródło:
Nukleonika; 2015, 60, No. 4, part 2; 815-820
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energochłonność procesu balotowania pozostałości pozrębowych
Energy consumption of the logging residues bundling process
Autorzy:
Moskalik, T.
Nowacka, W.L.
Sadowski, J.
Zastocki, D.
Powiązania:
https://bibliotekanauki.pl/articles/880842.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Leśny Zakład Doświadczalny. Centrum Edukacji Przyrodniczo-Leśnej w Rogowie
Tematy:
lesnictwo
biomasa lesna
pozostalosci zrebowe
balotowanie odpadow
energochlonnosc
Źródło:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej; 2014, 16, 2B[39]
1509-1414
Pojawia się w:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies