Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Rakowski, A." wg kryterium: Autor


Wyświetlanie 1-13 z 13
Tytuł:
Pitch Strength of Residual Sounds Estimated Through Chroma Recognition by Absolute-Pitch Possessors
Autorzy:
Rogowski, P.
Rakowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/177930.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
absolute pitch
residual sounds
virtual pitch
Opis:
Absolute pitch is a unique feature of the auditory memory which makes it possible for its possessors to recognize the musical name (chroma) of a tone. Six musicians with absolute pitch, selected from a group of 250 music students as best scoring in musical pitch-naming tests, identified the chroma of residue pitch produced by harmonic complex tones with several lower partials removed (residual sounds). The data show that the percentage of correct chroma recognitions decreases as the lowest physically existent harmonic in the spectrum is moved higher. According to our underlying hypothesis the percentage of correct chroma recognitions corresponds to the pitch strength of the investigated tones. The present results are compared with pitch strength values derived in an experiment reported by Houtsma and Smurzynski (1990) for tones same as those used in this study but investigated with the use of a different method which consisted in identification of musical intervals between two successive tones. For sounds comprising only harmonics of very high order the new method yields a very low pitch recognition level of about 20% while identification of musical intervals remains stable at a level of about 60%.
Źródło:
Archives of Acoustics; 2010, 35, 3; 331-347
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Absolute Pitch and Its Frequency Range
Autorzy:
Rakowski, A.
Rogowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/177343.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
auditory memory
pitch
absolute pitch
Opis:
This paper has two distinct parts. Section 1 includes general discussion of the phenomenon of “absolute pitch” (AP), and presentation of various concepts concerning definitions of “full”, “partial” and “pseudo” AP. Sections 2–4 include presentation of the experiment concerning frequency range in which absolute pitch appears, and discussion of the experimental results. The experiment was performed with participation of 9 AP experts selected from the population of 250 music students as best scoring in the pitch-naming piano-tone screening tests. Each subject had to recognize chromas of 108 pure tones representing the chromatic musical scale of nine octaves from E0 to D#9. The series of 108 tones was presented to each subject 60 times in random order, diotically, with loudness level about 65 phon. Percentage of correct recognitions (PC) for each tone was computed. The frequency range for the existence of absolute pitch in pure tones, perceived by sensitive AP possessors stretches usually over 5 octaves from about 130.6 Hz (C3) to about 3.951 Hz (B7). However, it was noted that in a single case, the upper boundary of AP was 9.397 Hz (D9). The split-halves method was applied to estimate the reliability of the obtained results.
Źródło:
Archives of Acoustics; 2011, 36, 2; 251-266
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efektywność działania promieniowania UVC w urządzeniach do eliminacji skażeń bakteriologicznych z powierzchni skorup jaj
Efficiency of ultra-violet radiation applied in facilities eliminating bacterial contamination from the surface of egg-shells
Autorzy:
Sobczak, J.
Marek, P.
Chmielowski, A.
Rakowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/238717.pdf
Data publikacji:
2011
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
promieniowanie UVC
natężenie
dawka
skażenie
skorupa
jaja spożywcze
UVC radiation
intensity
dose
disinfection
edible egg-shells
bacterial contamination
Opis:
W pracy przedstawiono czynniki wpływające na skuteczność działania promieniowania UVC w eliminacji skażeń bakteriologicznych z powierzchni skorup jaj spożywczych. Związane są one z charakterystyką fal elektromagnetycznych, do jakich zalicza się promieniowanie UVC, jak również z właściwościami oraz parametrami technicznymi promienników. Tylko odpowiednia wzajemna relacja tych czynników może zapewnić wymagany poziom skuteczności rozpatrywanej metody dezynfekcji. Praca obejmuje opis przebiegu badań prototypowego urządzenia do naświetlania skorup jaj promieniowaniem UVC, ocenę jego skuteczności w zależności od zmieniających się parametrów fizycznych, tj. czasu naświetlania, natężenia promieniowania oraz dostarczonej dawki. Na podstawie badań określono optymalne parametry czynników decydujących o skuteczności promieniowania UVC w dezynfekcji skorup jaj spożywczych.
Paper considered some factors affecting the efficiency of UVC radiation to elimination of bacterial contamination from the surface of edible egg shells. Factors are connected with the characteristics of electromagnetic waves, the UVC radiation inclusive, as well as with technical properties and parameters of the radiators. Only adequate interrelations among these factors may assure required efficiency level of considered disinfection method. Paper described investigation course of a prototype installation for exposure of the egg-shells to UVC radiation, evaluated its efficiency depending on variable physical parameters, such as the time of exposure, radiation intensity and supplied radiation dose. On the basis of investigation results the optimum parameters were determined for the factors decisive on effectiveness of UVC radiation applied to disinfecting the shells of edible eggs.
Źródło:
Problemy Inżynierii Rolniczej; 2011, R. 19, nr 1, 1; 143-155
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena proekologicznej metody ograniczenia emisji CO2 w powietrzu usuwanym z kurnika
Assessment of the environment-friendly method of limiting emission of CO2 in air removed from the henhouse
Autorzy:
Sobczak, J.
Marek, P.
Chmielowski, A.
Rakowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/336156.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
ocena
ograniczenie emisji CO2
powietrze
kurnik
assessment
limiting emission of CO2
air
henhouse
Opis:
Celem podjętych badań było określenie skuteczności fitoremediacji jako proekologicznej metody ograniczania poziomu dwutlenku węgla w powietrzu usuwanym z kurnika. Badania prowadzono w obiekcie doświadczalnym złożonym ze stanowiska z kurami nieśnymi i szklarni, zbudowanej nad kurnikiem, przez którą przepływało powietrze usuwane z pomieszczenia z ptakami. Badania porównawcze wykonano w 3 kolejnych miesiącach ze względu na zmieniające się warunki pogodowe. Analiza wstępnych wyników wykazała średnią redukcję CO2 o 10% w powietrzu po przejściu między roślinami, co pozwala rozważać metodę fitoremediacji jako proekologiczną alternatywę w oczyszczaniu powietrza usuwanego z budynków inwentarskich.
The aim of undertaken examinations was to determine the effectiveness phytoremediation as the environment-friendly method of limiting ammonia in air removed from the henhouse. There were carrying out tests in the research facility consisting of the henhouse with broody chickens and the greenhouse built above the henhouse through which came polluted air. The benchmarking was carried out in 3 consecutive months for reason of changing weather conditions. Analysis of preliminary results demonstrated the average reduction of CO2 of about 10 % in air along the passage between plants what allows to consider the method of phytoremediation as the environmental alternative in purifying air removed from henhouses.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2011, 56, 2; 131-135
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wstępna ocena proekologicznej metody ograniczenia emisji NH3 z powietrza usuwanego z kurnika
Preliminary assessment of the enviroment-friendly method of limiting emission of ammonia in air removed from the henhouse
Autorzy:
Sobczak, J.
Marek, P.
Chmielowski, A.
Rakowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/843951.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Zootechniczne
Tematy:
kurniki
zanieczyszczenia powietrza
amoniak
ograniczanie emisji
oczyszczanie powietrza
fitoremediacja
Opis:
Celem podjętych badań było określenie skuteczności fitoremediacji, jako proekologicznej metody ograniczania amoniaku w powietrzu usuwanym z kurnika. Badania prowadzono w obiekcie doświadczalnym złożonym ze stanowiska z kurami nieśnymi i szklarni zbudowanej nad kurnikiem, przez którą przepływało zanieczyszczone powietrze. Badania porównawcze wykonano w 3 kolejnych miesiącach, ze względu na zmieniające się warunki pogodowe. Wstępne badania dały wyniki uzasadniające rozważenie metody fitoremediacji, jako ekologicznej alternatywy w oczyszczaniu powietrza usuwanego z budynków inwentarskich.
The aim of undertaken examinations was to determine the effectiveness phyto-remediation as the environment-friendly method of limiting ammonia in air removed from the henhouse. There were carrying out research in the research facility consisting of the henhouse with broody chickens and the greenhouse built above the henhouse through which came polluted air. The benchmarking was carried out in 3 consecutive months on account of changing weather conditions. Preliminary examinations gave results allowing considering the method phyto-remediation as the environmental alternative in purifying air removed from henhouses. Plants in the greenhouse heated up mainly with the warm from the henhouse, enable the elimination of the considerable part of ammonia and they can be also an additional source of economic benefits (using green mass).
Źródło:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego; 2011, 07, 2
1733-7305
Pojawia się w:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania skuteczności usuwania bakterii ze skorup jaj spożywczych przez naświetlanie promieniami UVC
Investigations on the efficiency of bacteriological contamination removal from edible eggs shells surface by UVC radiation
Autorzy:
Marek, P.
Sobczak, J.
Rakowski, A.
Maćkowiak, J.
Gedymin, M.
Powiązania:
https://bibliotekanauki.pl/articles/239214.pdf
Data publikacji:
2009
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
Salmonella
skażenie
skorupa jaj
promieniowanie UVC
natężenie
dawka
promieniowanie
bacteria
egg shells
contamination
UVC radiation
radiation intensity
radiation dose
Opis:
Przedstawiono wyniki badań skuteczności usuwania skażeń bakteriologicznych z powierzchni skorup jaj spożywczych za pomocą promieniowania UVC. Badania prowadzone były w Zakładzie Technologii Drobiarskich IBMER w Poznaniu w 2009 r. Prowadzono je na jajach skażonych bakteriami Salmonella. Uzyskane wyniki pokazują wpływ wielu czynników fizycznych takich jak czas naświetlania, temperatura świetlówek na proces unieszkodliwiania bakterii. Wykazano również zależność natężenia UVC od temperatury i kierunku padania promieni. Stwierdzono znaczny spadek natężenia promieniowania w czasie spowodowany nagrzewaniem się świetlówek. Badania skuteczności prototypu weryfikowano badaniami mikrobiologicznymi. Istotny spadek liczebności bakterii uzyskano po wydłużeniu czasu przebywania jaj w komorze naświetlającej do 54 s.
The results of investigations on efficiency of bacteriological contamination removal from the surface of edible eggs shells by UVC radiation, were presented in the paper. The research was carried out at the Poultry Technology Department, IBMER's Branch in Poznań. The object of investigation were eggs contaminated with Salmonella bacteria. Results showed the influence of some physical factors, such as radiation time, temperature of fluorescent ultraviolet lamps, on the process of overpowering bacteria. Also dependence of UVC intensity on the temperature and direction of rays incidence was stated. Considerable drop of irradiation intensity in time was observed as a result of initial fluorescence lamps heating up. The tests of prototype were verified by microbiological tests. Significant reduction of bacteria number was obtained by prolongation of staying the eggs into radiation chamber up to 54 sec.
Źródło:
Problemy Inżynierii Rolniczej; 2009, R. 17, nr 4, 4; 151-159
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości warstw azotowanych jarzeniowo, wytworzonych na stali 316L
The properties of glow discharged nitrating layer on 316L steel
Autorzy:
Rakowski, W.A.
Kot, M.
Zimowski, S.
Wierzchoń, T.
Powiązania:
https://bibliotekanauki.pl/articles/256929.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
warstwa azotowana jarzeniowo
stal
technologia hybrydowa
dyfuzja
właściwości mechaniczne
właściwości tribologiczne
nitrating steel
layer
adhesion
diffusion
tribological properties
mechanical properties
hybrid techniques
Opis:
W inżynierii powierzchni coraz powszechniej stosuje się technologie hybrydowe, których pierwszy etap polega na modyfikacji podłoża, najczęściej metodami dyfuzyjnymi. W artykule przedstawiono badania struktury, topografii powierzchni, badania właściwości mechanicznych i tribologicznych warstw azotowanych jarzeniowo, wytworzonych na stali 316L. Grubość warstw wynosi do 29 žm, wzrost twardości po azotowaniu H(IT) od 3000 N/mm2 do 9016 N/mm2 , wskaźnik zużycia objetościowego zmniejszył się z 48*10(-5) mm3/Nm do1,2*10(-5) mm3/Nm. Powierzchnia po azotowaniu jest bardzo rozwinięta, co może zwiększyć adhezję powłoki do tego podłoża.
The hybrid techniques become widely used in surface engineering. In a first step the subsurface of substrate is usually modified by diffusion. The investigations of structures, surface topography, mechanical and tribological properties of glow discharged nitrating 316 L steel surface have been presented in the paper. A nitrated layer has thickness up to 29 žm, a hardness evaluate from H(JT) = 3000 MPa to 9016 MPa, a wear index decrease from z 48*10(-5) mm3/Nm to 1,2*10(-5) mm3/Nm. The surface after glow discharge is very developed, what may increase adhesion of coating to this substrate surface.
Źródło:
Problemy Eksploatacji; 2006, 3; 107-115
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości powłok Si3N4 formowanych metodą IBAD na azotowanej stali 316L
The properties of Si3N4 coatings deposited by IBAD method on nitrating 316L steel
Autorzy:
Rakowski, W.A.
Kot, M.
Zimowski, S.
Skwirczyński, P.
Rajchel, B.
Powiązania:
https://bibliotekanauki.pl/articles/256939.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
stal azotowana
metoda IBAD
powłoka
adhezja
elastyczność
twardość
odporność na pękanie
nitrating steel
IBAD method
coating
properties
elasticity
adhesion
hardness
Opis:
Powłoki typu SixNy formowano dwuwiązkową metodą IBAD (Double Beam Ion Beam Assisted Deposition) na podłożu azotowanej stali 316L, w oparciu o wartości parametrów procesu uzyskanych na drodze symulacji. Wyniki badań właściwości mikromechanicznych wskazują, że otrzymane powłoki charakteryzują się bardzo dobrą adhezją do podłoża oraz wysoką elastycznością i twardością. Zwraca uwagę wyjątkowo wysoka odporność na pękanie tych powłok nawet przy bardzo dużych odkształceniach.
The S13N4 coatings deposited by Double Beam Ion Beam Assisted Deposition (DB IBAD) method on nitrating 316L steel, used a set of process parameters obtained by computer simulation. The results of mechanical investigations showed very good adhesion of coating to the substrate, excellent elasticity and high hardness. A very high coating resistance to crack even under high deformation should be emphasized.
Źródło:
Problemy Eksploatacji; 2006, 3; 83-89
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of yield model parameters on the probability of defect occurrence
Autorzy:
Rakowski, M.
Pleskacz, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/308643.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
yield model parameters
spot defect
probability of defect occurrence
critical area
Opis:
This paper describes the analysis of the influence of yield loss model parameters on the calculation of the probability of arising shorts between conducting paths in IC's. The characterization of the standard cell in AMS 0.8 žm CMOS technology is presented as well as obtained probability results and estimations of yield loss by changing values of model parameters.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 101-104
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The measurement of displacement with the use of MEMS sensors : accelerometer, gyroscope and magnetometer
Autorzy:
Kobierska, A.
Podsędkowski, L
Poryzała, P.
Rakowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/384501.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
Kalman filter
MEMS sensors
measuring arm
Opis:
The paper presents the method of determining the global orientation of links of the measuring arm by gauging the angles of the links relative to the vector of the gravitational and magnetic field using inertial sensors. A method of using Kalman filter to average the results is presented as a test on two-links measuring arm equipped with accelerometers and magnetometers placed on each of the links and analysis of measurement results in terms of repeatability. There was demonstrated the ability of creating kinematic chain. Instead of determining the position of the final link on the basis of the measurement of angles in relation to the previous links from the end to the base of the arm, it is possible to define links global orientation by measuring angles of links in reference to the vectors of the gravity field and the magnetic field, in global coordinate system.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2017, 11, 2; 42-47
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka genetyczna PCR-RFLP oraz ocena zdrowotnosci wybranych populacji debu elblaskiego i krotoszynskiego
Genetic characterization in relation to the health state of oak populations in the Elblaski i Krotoszynski regions of Poland
Autorzy:
Nowakowska, J.A.
Oszako, T.
Bieniek, J.
Rakowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/45956.pdf
Data publikacji:
2007
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
dab elblaski
dab krotoszynski
zmiennosc genetyczna
populacje roslin
ekotypy
Quercus robur
lesnictwo
zdrowotnosc drzew
DNA chloroplastowy
dab szypulkowy
metoda PCR-RFLP
drzewa lesne
Źródło:
Leśne Prace Badawcze; 2007, 3; 33-51
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Micro- and Nanoprocessing of Polymers Using a Laser Plasma Extreme Ultraviolet Source
Autorzy:
Bartnik, A.
Fiedorowicz, H.
Jarocki, R.
Kostecki, J.
Rakowski, R.
Szczurek, A.
Szczurek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1539081.pdf
Data publikacji:
2010-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.38.Ph
82.50.Kx
81.40.Wx
Opis:
Laser plasma with temperature of the order of tens eV can be an efficient source of extreme ultraviolet (EUV). The radiation can be focused using different kind of optics, giving sufficient fluence for some applications. In this work we present results of investigations concerning applications of a laser plasma EUV source based on a double stream gas puff target. The source was equipped with two different grazing incidence collectors. One of them was a multifoil collector, the second one was an axisymmetrical ellipsoidal collector. The multifoil mirror was used mainly in experiments concerning micromachining of organic polymers by direct photo-etching. The experiments were performed for different polymers that were irradiated through a fine metal grid as a contact mask. The smallest element of a pattern structure obtained in this way was 5 μm, while the structure height was 50 μm giving an aspect ratio about 10. The laser-plasma EUV source equipped with the axisymmetrical ellipsoidal collector was used for surface modification of organic polymers and inorganic solids. The surface morphology after irradiation was investigated. Different forms of micro- and nanostructures were obtained depending on material and irradiation conditions.
Źródło:
Acta Physica Polonica A; 2010, 117, 2; 384-390
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza właściwości mikromechanicznych i tribologicznych powłok nanokompozytowych nc-WC/a-C i Nc-WC/a-C:H
Analysis of micromechanical and tribological properties of nc-WC/a-C and nc-WC/a-C:H nanocomposite coatings
Autorzy:
Kot, M.
Moskalewicz, T.
Wendler, B.
Czyrska-Filemonowicz, A.
Rakowski, W.
Zimowski, S.
Powiązania:
https://bibliotekanauki.pl/articles/187994.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
powłoki nanokompozytowe
twardość
test zarysowania
zużycie
nanocomposite coatings
hardness
scratch test
wear
Opis:
W publikacji zostały zaprezentowane wyniki badań mikromechanicznych oraz tribologicznych powłok nc-WC/a-C i nc-WC/a-C:H osadzonych poprzez rozpylanie magnetronowe na nieutwardzonym i utwardzonym powierzchniowo tlenem stopie Ti6Al4V. Obie powłoki są zbudowane z nanocząstek różnych węglików wolframu WC o wielkości 2-6 nm umieszczonych w amorficznej węglowej osnowie. Porównywano wpływ rodzaju osnowy węglowej – amorficznej (a:C) i amorficznej uwodornionej (a-C:H) oraz wpływ umocnienia podłoża przez utwardzenie tlenem na właściwości mikromechaniczne i tribologiczne układów z powłokami kompozytowymi. Twardość powłoki nc-WC/a-C wynosi 18,4 GPa, a powłoki nc-WC/a-C:H 14,1 GPa. Testy tribologiczne wykazały natomiast znacznie lepszą odporność na zużycie przez tarcie powłoki nc-WC/a-C:H niż powłoki nc-WC/a-C.
In the article, micromechanical and tribological properties of nanocomposite coatings nc-WC/a-C and nc-WC/a-C: H were presented. Coatings were deposited by magnetron sputtering on baseline and oxigen-hardened Ti6Al4V titanium alloy. Both coatings contain tungsten carbide nanoparticles nc-WC of different sizes 2 to 6 nm imbedded in an amorphous carbon matrix. The effect of carbon matrix – hydrogen free (a:C) and hydrogenated (a-C:H) and the influence of substrate strengthening on the mechanical properties of coating-substrate systems were tested. The Nc-WC/a-C coating has higher hardness 18.4 GPa than nc-WC/a-C:H - 14.1 GPa. It was established that the coating with hydrogenated carbon matrix has better wear resistance than the WC/a-C coating. For both systems with oxygen-hardened substrate, a low coefficient of friction 0.1 to 0.12 wear was measured.
Źródło:
Tribologia; 2010, 3; 135-143
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies