Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Polak, F." wg kryterium: Autor


Tytuł:
E-REV’s hybrid vehicle range modeling
Autorzy:
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/245454.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
battery
simulation model
electric vehicle
E-REV
Opis:
Article presents the influence of battery capacity and electric generator power on a series hybrid vehicle range. Vehicles equipped with increased battery capacity and small power generator are special type of series hybrid vehicles called Extended Range Electric Vehicles – E-REV. The increasing number of hybrid and electric vehicles increases the demand for durable and efficient sources of energy storage for vehicles. The hybrid vehicle's battery driven range is increased as battery power density is increased and its cost is decreased. This is due to the battery cell cost decreasing and improvement of cell chemistry. That cause higher and higher distance driven on electric mode in hybrid vehicles. First series hybrid vehicle engine power was equal to engine powered the vehicle’s wheels. Nowadays, series hybrid vehicles are more electric vehicles with small power generator (piston or turbine engine. In such a constructions, battery is used as an energy buffer and combustion engine is used more as emergency power supply. To minimize this phenomenon, manufacturers use counteracting solutions that include mounting additional cells in the battery that are switched on when the battery controller identifies a particular battery cell’s failure or high degradation. This is due to the deep and shallow discharges of the battery, the numbers of charging and discharging cycles, and the age and technology of battery packs. AMESim software was used for the simulation of the E-REV hybrid vehicle range. The research was based on modelling the range of the vehicle with different battery capacity works with power generator of different power. By modelling different capacity of battery and power of small generator, it is possible to determine the vehicle range.
Źródło:
Journal of KONES; 2018, 25, 2; 281-286
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energetic balance of unmanned ground vehicle hybrid power transmission
Autorzy:
Karczewski, M.
Szczęch, L.
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/242808.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
balance
unmanned vehicle
hybrid transmission
test stand
Opis:
Article presents the energetic balance of small-unmanned vehicle hybrid power transmission. The vehicle equipped with series hybrid transmission consisted of electric engines connected to the battery pack and small Diesel power generator. In mentioned construction, battery is used as energy buffer and combustion engine is used more as emergency power supply, and is turned on when battery is depleted. In other condition, power generator can be turned off, without reducing power of transmission parameters, except its range. Investigation was divided on two stages. At first stage generator, charging unit and battery were placed outside the vehicle. One piston power generator was feed by Diesel fuel. Fuel consumption of power generator was recorded from AVL fuel balance and energy parameters were recorded by power line analyser of BMR Company. Generator was connected to the direct current power plant. 70 Ah and 48 DC Lithium-polymer battery was charged from the power plant. After charging cycle, small water resistor was used to discharge the battery. Power parameters of discharged battery were measured. This enable to measure balance form tank to the battery. Second stage of the energetic balance determination was to measure internal resistances of vehicle power transmission from current inverter/converter connected to the engine and through the transmission up to the wheels of the vehicle. Power loss of energy at different speed of vehicle wheels without ground contact was measured in respect of power consumption. The series hybrid transmission is consider less efficient than parallel but because of specific configuration of power transmission, it was possible to reach higher efficiency
Źródło:
Journal of KONES; 2018, 25, 2; 177-184
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hilbert curve fractal antenna for detection and on-line monitoring of partial discharges in power transformers
Antena fraktalna Hilberta do detekcji i monitoringu wyładowań niezupełnych w transformatorach energetycznych
Autorzy:
Sikorski, W.
Szymczak, C.
Siodła, K.
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/300766.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
fault diagnosis
maintenance of power transformers
partial discharge detection
monitoring
UHF method
Hilbert curve fractal antenna
diagnostyka uszkodzeń
eksploatacja transformatorów energetycznych
detekcja wyładowań niezupełnych
monitoring wyładowań niezupełnych
metoda UHF
antena fraktalna Hilberta
Opis:
This article describes the design of UHF Hilbert curve fractal antenna (HCFA) specially adapted for the partial discharge monitoring system. The authors present the mathematical apparatus for calculating resonant frequencies of Hilbert fractal antenna and results of a computer simulation of the developed prototype. In the design process, the antenna’s working environment (mineral oil) and the mechanical construction of the transformer inspection window were taken into consideration as well. The article also shows the results of laboratory tests carried out in the transformer tank model with different type of partial discharge sources. Both simulations and partial discharge measurements showed that the HCFA, due to such properties as: multi-resonance, small size, low fabrication cost and high sensitivity, is an interesting alternative to other UHF probes installed in transformer inspection window.
W artykule zaprezentowano projekt anteny fraktalnej Hilberta przeznaczonej do stosowania w systemach monitoringu wyładowań niezupełnych wykorzystujących metodę UHF. Autorzy szczegółowo opisali aparat matematyczny służący do estymacji częstotliwości rezonansowych anteny fraktalnej Hilberta oraz wyniki symulacji komputerowych. Ponadto, w artykule zaprezentowano wyniki pomiarów laboratoryjnych, w trakcie których generowano impulsy wyładowań niezupełnych w modelu kadzi transformatora energetycznego. Zarówno wyniki symulacji komputerowych jak i pomiarów laboratoryjnych wykazały, że prototypowa antena fraktalna Hilberta, dzięki takim własnościom jak: wielorezonansowość, małe wymiary, niski koszt produkcji oraz wysoka czułość, stanowi ciekawą alternatywę dla innych czujników UHF instalowanych w oknie rewizyjnym transformatora energetycznego.
Źródło:
Eksploatacja i Niezawodność; 2018, 20, 3; 343-351
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of electrochemical battery aging process on an electric vehicle’s range
Autorzy:
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/247326.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
battery
simulation model
electric vehicle
LiFePO4
bateria
model symulacyjny
pojazd elektryczny
Opis:
This article presents the influence of aging processes of the electric vehicle’s electrochemical battery. The increasing number of hybrid and electric vehicles increases the demand for durable and efficient sources of energy storage for vehicles. The vehicle's declared range is reduced over time. This is due to the aging of the battery that causes loss of its capacity and loss of its power. To minimize this phenomenon, manufacturers use counteracting solutions that include mounting additional cells in the battery that are switched on when the battery controller identifies a particular battery cell’s failure or high degradation. This is due to the deep and shallow discharges of the battery, the number of charge and discharge cycles, and the age and technology of battery packs. AMESim software was used for the simulation of the electric vehicle. The research was based on modelling the range of the vehicle whose cell capacity includes processes related to aging of the battery. An aging cell algorithm causes the capacity to drop and consequently reduces the range of one full charge. By modelling aging processes, it is possible to determine the battery’s probable capacity loss during vehicle use and to estimate how these processes affect the vehicle's range.
Źródło:
Journal of KONES; 2018, 25, 1; 325-331
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko do badań referencyjnych w zakresie detekcji, identyfikacji i lokalizacji wyładowań niezupełnych
Test site for reference tests in the scope of detection, identification and location of partial discharges
Autorzy:
Szymczak, C.
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/377351.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
wyładowania niezupełne
diagnostyka transformatorów
anteny VHF/UHF
Opis:
Artykuł podejmuje aktualną tematykę detekcji, lokalizacji i identyfikacji wyładowań niezupełnych (wnz) w urządzeniach elektroenergetycznych z użyciem metod wykorzystujących sygnały elektromagnetyczne w zakresie UHF (ang. Ultra High Frequency -ultra wysokie częstotliwości). Przedstawiony został proces projektowania i budowy stanowiska badawczego, umożliwiającego przeprowadzanie badań z wykorzystaniem metod detekcji, identyfikacji i lokalizacji wyładowań niezupełnych. Głównym elementem jest symulator wnz w postaci przenośnego generatora iskry elektrycznej, wykorzystywanego dalej jako referencyjne źródło sygnału elektromagnetycznego. W pracy oprócz opisu stanowiska badawczego oraz procesu jego projektowania i budowy zostały przedstawione wyniki badań rejestracji sygnału fali elektromagnetycznej generowanej przez źródło referencyjne.
This paper discuss the actual subject of detection, location and identification of partial discharge (PD) in electrical equipment using methods that use electromagnetic signals in the Ultra High Frequency (UHF) band. Design steps and construction process of research site to maintain tests using methods of detection, identification and location of PD were described. The main element is the PD simulator in the form of a portable electric spark generator, which is used as a reference source of electromagnetic signals. In further part of this paper analysis results of EM signal, generated with mentioned portable spark generator, both in time and frequency domain, were presented.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2017, 90; 235-244
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aktualne dane na temat sytuacji epizootycznej w zakresiechoroby guzowatej skóry bydła
Current data on epizootic situation of lumpy skin disease
Autorzy:
Rola, J.
Polak, M.
Zmudzinski, J.F.
Powiązania:
https://bibliotekanauki.pl/articles/860442.pdf
Data publikacji:
2016
Wydawca:
Krajowa Izba Lekarsko-Weterynaryjna
Źródło:
Życie Weterynaryjne; 2016, 91, 12
0137-6810
Pojawia się w:
Życie Weterynaryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of loading command system vehicles on the transport aircraft C-130
Autorzy:
Karczewski, M.
Polak, F.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/347978.pdf
Data publikacji:
2016
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
command system vehicles
air transport of vehicles
Opis:
The article presents modeling of loading platforms for the automated command system of a field artillery battalion mounted on the light wheeled chassis. According to the operational requirements, the field battalion should be tailored to be transported by the transport aircraft C-130E Hercules, which requires limiting the weight and dimensions of vehicles. Since a vehicle cab height is equal with the exact centimeter precise to the aircraft cargo bay height, it is necessary to reduce the relevant vehicle height by lowering the tire pressures in order to obtain an adequate margin.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2016, 3; 100-111
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototyping of UHF antennas using simulation software
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/97315.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
partial discharges
UHF antenna
antenna design
simulations
Opis:
The method of ultra high frequency is being increasingly applied in the power transformer diagnostics. Using the probe (antenna) mounted inside the transformer tank it is possible to detect partial discharges occurring in defects of high–voltage insulation system. Such probes must be designed and optimized on several factors, such as frequency band, directivity, or the geometrical design etc. This paper presents parameters of two types of antennas (discone and microstrip patch) obtained through simulation. Calculations and simulations results will provide basis to comnstruct the prototypes of the antennas, which will eventually find application in the measurement system used for localisation of partial discharges inside power transformers.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 168-176
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototypowanie anten UHF przy pomocy programów symulacyjno-obliczeniowych
Prototyping of uhf antennas using simulation software
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/377250.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
wyładowania niezupełne
antena UHF
prototypowanie anten
symulacje
Opis:
Metoda ultra wysokich częstotliwości (ang. UHF – Ultra High Frequency) znajduje coraz szersze zastosowanie w diagnostyce transformatorów energetycznych. Wykorzystując sondy (anteny) montowane wewnątrz kadzi transformatora możliwa jest detekcja wyładowań niezupełnych pojawiających się w miejscach występowania defektów wysokonapięciowego układu izolacyjnego. Sondy takie muszą być odpowiednio zaprojektowane i zoptymalizowane z uwzględnieniem wielu czynników, takich jak np. pasmo częstotliwościowe, kierunkowość, czy konstrukcja geometryczna. W pracy zaprezentowane zostały parametry dwóch typów anten (mikropaskowej oraz dyskowostożkowej) uzyskanych na drodze symulacji. Na podstawie obliczeń i symulacji powstaną prototypy anten, które docelowo mają znaleźć zastosowanie w układzie służącym do lokalizacji wyładowań niezupełnych wewnątrz transformatorów energetycznych.
The method of ultra high frequency is being increasingly applied in the power transformers diagnostics. Using the probe (antenna) mounted inside the transformer tank it is possible to detect partial discharges occurring in defects of high–voltage insulation system. Such probes must be designed and optimized on several factors, such as frequency band, directivity, or the geometrical design etc. This paper presents parameters of the two types of antennas (discone and microstrip patch) obtained through simulation. Calculations and simulations results will provide basis to rise the prototypes of the antennas, which will eventually find application in the measurement system used for localisation of partial discharges inside power transformers.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 85; 85-93
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing methodology of small unmanned platform on the chassis dyno
Autorzy:
Karczewski, M.
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/243717.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
road transport
simulation
dyno chassis
examination of unmanned vehicle
Opis:
The article shows construction solution of chassis dyno, designed for small-unmanned platform hybrid drive testing. Brief fore design of chassis dyno were also presented. Most important parts of dyno are module design of dyno. Each of dyno module consists of one free roll and one roll powered by electrical engine for inertia braking. Asynchronous electric engines for dyno stand were selected. Maximum torque, with respect to vehicle wheel torque has to be greater than Mo < 50 Nm, maximum linear speed of vehicle can’t be greater than Vp ≤ 40 km/h, minimal vehicle dimensions: axle base greater than 500 mm, wheel base greater than 770 mm, inverters allow to connect in series enable synchronous operation by computer, during tests, received energy is dispersed in resistors, emergency shut off of each engines. Methodology of measurements, based on UDC test, was presented. Dyno stand was used for hybrid propulsion testing of small-unmanned vehicle. Dyno was used for hybrid drive testing, where measurement of electrical parameters, proportional to load of vehicle drive system, were collected and other parameters such as battery temperature, and electric engines or fuel consumption during tests. Tests were performed during various load and speed of vehicle. The developed methodology of research should allow for a comprehensive study of this type of vehicle in terms of overall efficiency, reliability and energy needs.
Źródło:
Journal of KONES; 2016, 23, 4; 201-207
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of LiFePO4 battery mathematic model
Autorzy:
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/247386.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
battery
LiFePO4
test stand
simulation model
Opis:
Article presents verification of LiFePO4 battery simulation model. Verification of battery model was made to assure real parameters of battery cells used for simulation. Simulation model of battery and test stand, similar to the stand used for test on a real battery, was designed in AMESim software. Data of the battery and single cell of battery characteristics were verified to assure true parameters for further tests of power transmission system of the vehicle. For verification theoretical model of the battery, real tests of battery discharging were performed in laboratory. Test stand used for battery discharging was build. Test stand was equipped in water resistor enable to set up various loads of battery. Electrical parameters of battery and battery cell were collected by voltage probes and current clamps and stored in database. Test was performed in similar condition, each time starting with fully loaded battery. Tests ends when battery management system shut down battery main switch. Tests conditions, virtual and real, were performed during similar battery load. Comparing data from unloading tests in laboratory enable to verify data of battery and battery cells designed in AMESim software. Such verification provide reliable model of the used battery. Model of the battery can be used in further simulation test of vehicle, where battery is installed.
Źródło:
Journal of KONES; 2016, 23, 4; 397-402
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototype measurement system for localization of partial discharges sources – microphone array
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/97228.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
partial discharges (PDs)
PD localization
sensor array
microphone array
beamforming
direction-of-arrival (DOA)
Opis:
This paper presents a prototype measurement system, that will be used for localization of acoustic emission sources originating from partial discharges (PD). It is based on sensor arrays technology and direction of arrival estimation algorithms. Acoustic signals will be received with a universal linear array (ULA) of sensors, wherein the sensory elements are microphones operating in the audible frequency range. For the estimation of the direction of arrival of these signals conventional beamforming algorithm is used which has also been described theoretically. Ultimately, the system will be used to determine the direction of arrival of the acoustic signal generated by the insulation defect, which is corona discharge.
Źródło:
Computer Applications in Electrical Engineering; 2015, 13; 209-219
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototypowy układ pomiarowy do lokalizacji źródeł emisji akustycznej - matryca mikrofonów
Prototype measurement system for localisation of partial discharges sources – microphone array
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/376647.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
wyładowania niezupełne
lokalizacja źródeł sygnałów
matryca sensorowa
estymacja kierunku nadejścia sygnału (DOA)
kształtowanie wiązki
beamforming
Opis:
W pracy zaprezentowany został prototypowy układ pomiarowy służący do lokalizacji źródeł sygnałów dźwiękowych, pochodzących od wyładowań niezupełnych, opierający się na technologii matryc sensorowych oraz algorytmów estymacji kierunku nadejścia sygnałów. Sygnały akustyczne odbierane są przy pomocy liniowej matrycy sensorów, w której elementami sensorycznymi są mikrofony pracujące w zakresie częstotliwości słyszalnych. Do estymacji kierunku nadejścia tych sygnałów użyto klasycznego algorytmu kształtowania wiązki, którego założenia teoretyczne zawarto w pracy. Docelowo układ będzie służył do określania lokalizacji źródła sygnałów akustycznych generowanych przez wyładowanie ulotowe.
This paper presents a prototype measurement system, that will be used for localisation of acoustic emission sources. It is based on sensor arrays technology and direction of arrival estimation algorithms. Acoustic signals will be received with a universal linear array (ULA) of sensors, wherein the sensory elements are microphones operating in the audible frequency range. For the estimation of the direction of arrival of these signals conventional beamforming algorithm is used which has also been described theoretically. Ultimately, the system will be used to determine the direction of arrival of the acoustic signal generated by the insulation defect, which is corona discharge.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 84; 207-214
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Localisation of partial discharges sources using acoustic transducers arrays
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/97543.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
partial discharge
Signal Source Localisation
Transducer Array
Direction of Arrival (DOA) Estimation
music
Opis:
This paper concerns the issue of the partial discharge (PD) sources location using acoustic emission transducer arrays technique and the high resolution direction of arrival estimation technology. In addition to the theoretical assumptions of both techniques, the simulation result, in which an uniform linear array (ULA) was used for registration of the acoustic emission signals generated by defects in power transformer insulation system were shown. To estimate the direction of arrival (DOA) of acoustic signals, that propagate from the discharge-generating defect to the transducer array installed on transformer tank, Multiple Signal Classification (MUSIC) algorithm was chosen. With the ability to locate multisource discharges (even at very low signal-to-noise ratio - SNR), the adopted solution has advantages over conventional techniques.
Źródło:
Computer Applications in Electrical Engineering; 2014, 12; 237-245
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lokalizacja źródeł wyładowań niezupełnych przy użyciu matrycy przetworników
Partial discharge source localization using sensor array
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/378075.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
wyładowania niezupełne
lokalizacja źródeł sygnałów
matryca przetworników
estymacja kierunku nadejścia sygnału (DOA)
DOA
algorytm Multiple Signal Classification
Opis:
Artykuł dotyczy problematyki lokalizacji źródeł wyładowań niezupełnych (wnz) przy użyciu techniki matryc przetworników emisji akustycznej oraz wysokorozdzielczej techniki estymacji kierunku nadejścia sygnału. W pracy, oprócz założeń teoretycznych obu technik, przedstawiono wyniki symulacji, w których do rejestracji sygnałów emisji akustycznej generowanych przez defekty układu izolacyjnego transformatora energetycznego, zastosowano liniową matrycę przetworników (ang. ULA - Uniform Linear Array). Z kolei do estymacji kierunku nadejścia sygnałów akustycznych, które propagują się od defektu generującego wyładowania do zainstalowanej na kadzi transformatora matrycy przetworników, wybrano algorytm Multiple Signal Classification (MUSIC). Dzięki możliwości lokalizacji wyładowań wieloźródłowych (nawet przy bardzo niskim stosunku sygnału użytecznego od szumu), przyjęte rozwiązanie wykazuje przewagę nad technikami konwencjonalnymi.
This paper concerns the issue of partial discharges (PD) sources location using acoustic emission transducer arrays technique and the high resolution direction of arrival estimation technology. In addition to the theoretical assumptions of both techniques, the simulation result, in which an uniform linear array (ULA) was used for registration of the acoustic emission signals generated by defects in power transformer insulation system, were shown. To estimate the direction of arrival (DOA) of acoustic signals, that propagate from the discharge-generating defect to the transducer array installed on transformer tank, Multiple Signal Classification (MUSIC) algorithm was chosen. With the ability to locate multisource discharges (even at very low signal to noise ratio - SNR), the adopted solution has advantages over conventional techniques.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2014, 78; 157-166
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies