Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Malicki, J." wg kryterium: Autor


Tytuł:
Experimental and Numerical Study of NACA and Conventional Riveting Procedure
Autorzy:
Wronicz, W.
Kaniowski, J.
Malicki, M.
Kucio, P.
Klewicki, R.
Powiązania:
https://bibliotekanauki.pl/articles/97783.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
rivet
NACA riveting
fatigue
hole expansion
computed tomography
Opis:
Fatigue behaviour is one of the most important properties of modern airplanes and rivets influence it strongly. According to the literature, the NACA riveting offers a multiple increase in the fatigue life of joints. The aim of this paper is to investigate the benefits offered by the NACA riveting procedure with respect to the residual stress and strain distribution after riveting as well as rivet hole expansion. Experimental and numerical approaches were adopted. The conventional riveting with both the universal and countersunk rivets was compared with the NACA riveting. The countersunk angle and depth in the case of the NACA riveting was modified somewhat relative to the values met in the literature. For these three cases, strain gauge measurements during riveting, hole expansion measurements and FE calculations were performed. The hole expansion measurement with the use of Computer Tomography(CT) was proposed. Only the FE calculations unambiguously indicate better fatigue properties of the NACA riveting. The proposed method of hole expansion measurement requires further research to increase its accuracy.
Źródło:
Fatigue of Aircraft Structures; 2017, 9; 157-170
2081-7738
2300-7591
Pojawia się w:
Fatigue of Aircraft Structures
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of Dune Profile Changes Generated by Hurricane: Preliminary Results
Autorzy:
Szmytkiewicz, P.
Szmytkiewicz, M.
Schönhofer, J.
Morawski, J.
Malicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/241504.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
coastal zone
dune
erosion
Opis:
The paper presents the main theoretical concepts related to methods of calculating the erosion rate for sandy dunes on natural coasts, namely, the beach equilibrium profile and incident waves. To illustrate calculations of dune erosion in the vicinity of the Coastal Research Station (CRS) in Lubiatowo, the Xbeach model (an incident wave model) was used. The calculations were carried out for hydrological and hydrodynamic conditions that accompanied Hurricane Ksawery (December 6–8, 2013). The results of the calculations were compared with the measured data. A satisfactory agreement was obtained between the predicted and measured results.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2018, 65, 3; 221-239
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane wyróżniki jakościowe polędwic sopockich zapakowanych w stanie niewychłodzonym (badania modelowe)
Chosen quality factors of Sopocka Tenderloins packaged unchilled (model research)
Autorzy:
Szmanko, T.
Gorecka, J.
Niedzwiedz, J.
Malicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/826663.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
mieso wieprzowe
przetwory miesne
wedliny
poledwica sopocka
wyrozniki jakosci
jakosc
pakowanie w stanie niewychlodzonym
przechowywanie zywnosci
dzialanie bakteriostatyczne
powloki antybakteryjne
Opis:
W celu zwiększenia trwałości peklowane elementy przeznaczone do produkcji polędwic sopockich pokryto substancjami bakteriostatycznymi: mleczanem sodu, sorbinianem potasu, mieszaniną mleczanu sodu i sorbinianu potasu, cystatyną oraz karagenem lub żelatyną. Po zakończonej obróbce cieplnej wędzonki w stanie gorącym zapakowano próżniowo w folię termokurczliwą, schłodzono szokowo w temperaturze 0 °C i przechowywano w temperaturze bliskiej krioskopowej (-3 °C) przez 42 doby. Na podstawie przeprowadzonych badań stwierdzono, że zapakowanie wędzonek w stanie gorącym, bezpośrednio po zakończonym procesie produkcyjnym, a następnie szokowe ich schłodzenie i dalsze przechowywanie w temperaturze bliskiej krioskopowej korzystnie wpływa na ich jakość.
In order to increase their shelf life, cured meat elements to be use for the production of Sopocka Tenderloins were coated with bacteriostatic substances: sodium lactate, potassium sorbate, mixture of sodium lactate and potassium sorbate, cystatin, and carrageenan or gelatine. After the heat treatment completed, the hot smoked meat products were vacuum packed in a heat-shrink wrap, shock-cooled at 0 °C, and stored at a near cryoscopic temperature (-3 °C) for 42 days. Based on the tests performed, it was found that packaging hot smoked meat products directly upon the completion of the production process, as well as subsequent shock-cooling and storing them at a near cryoscopic temperature had a beneficial effect on their quality.
Źródło:
Żywność Nauka Technologia Jakość; 2013, 20, 5
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu wariantu podbudowy z kruszywa na rozkład odkształceń w konstrukcji nawierzchni drogowej
Impact analysis of the mineral aggregate subbase variant on the strains distribution in road pavement structure
Autorzy:
Świrek, M.
Górszczyk, J.
Malicki, K.
Powiązania:
https://bibliotekanauki.pl/articles/251705.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
nawierzchnia drogowa
odkształcenia
grubość podbudowy
road surface
strain
base thickness
Opis:
W artykule omówiony został problem wpływu grubości podbudowy niezwiązanej na wielkość i rozkład odkształceń konstrukcji podatnej nawierzchni drogowej. Analizy przeprowadzono dla jedenastu wariantów grubości podbudowy. W obliczeniach wykorzystano metodę mechanistyczną. Potwierdzono istotny wpływ zmian grubości podbudowy na wielkość i rozkład odkształceń w konstrukcji nawierzchni.
Paper discussed the influence of mineral aggregate subbase course thickness on the strain distribution in flexible pavement structure. Analyses were performed for eleven variants of subbase course thickness. The calculations performed with using of mechanistic method. A significant impact of changes in the thickness of the subbase course on the strain distribution in pavement structure was confirmed.
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 1522-1526, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of scattered radiation in the total body irradiation technique: evaluation of the spoiler and wall dose component in the depthdose distribution
Autorzy:
Piotrowski, T.
Adamska, K.
Malicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/147640.pdf
Data publikacji:
2007
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
total body irradiation (TBI)
scattered radiation
leukaemia
Opis:
To determine the additional dose in layers of the body close to the skin during total body irradiation (TBI), due to radiation scattered off the treatment room walls and behind plexiglass spoilers applied to improve dose uniformity within the irradiated body. Large-field 6, 15 and 25 MV photon beams were generated by a Saturn 43 medical accelerator. A solid 30 ´ 30 ´ 30 cm3 PMMA (polymethylmethacrylate) phantom was used to represent radiation scattered from the body of the patient. Dose distributions were measured by a Farmer ionization chamber. The dose component arising from the spoiler was measured 5 mm below the phantom surface, over distances of 5-100 cm between the spoiler and the phantom surface. To measure the contribution of backscattered radiation from the walls, a small lead block was placed between the source and detector. Measurements were carried out in air with the PMMA phantom removed, to eliminate radiation backscattered from the phantom. As measured behind the spoiler, attenuation of the primary photon beam by the spoiler itself was by 8, 5 and 3% for 6, 15 and 25 MV beams, respectively. The highest dose contribution from the spoiler arose at 10 cm separation between the phantom surface and the spoiler. Assessed at a depth of 5 mm in the phantom, at spoiler-phantom separation of 10 cm, relative to case without spoiler and with wall backscatter subtracted, the dose enhancement due to the spoiler was by 8, 13 and 20% at beam energies 6, 15 and 25 MV, respectively. In these measurements, the distance between the source and the phantom surface was 300 cm and that between the source and the spoiler - 290 cm. The dose contributions due to radiation backscattered from the walls, relative to the case without any wall backscatter, estimated over the distal side of the phantom at a distance of 20 cm between the wall and that side of the phantom, were 5, 6 and 8% at beam energies 6, 15 and 25 MV, respectively. The use of a spoiler enhanced the dose in regions close to the phantom surface, compensating for the dose decrease over that area due to build-up effect. Radiation backscattered from the wall enhanced the dose in regions close to the phantom surface facing the wall.
Źródło:
Nukleonika; 2007, 52, 4; 153-158
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Łęgi w źródliskach i przy drobnych ciekach wodnych; jak identyfikować, kartować i chronić te zbiorowiska?
Riparian forests in spring-fed areas and along headwaters: How to identify, map and protect these ecosystems?
Autorzy:
Pielech, R.
Bodziarczyk, J.
Gazda, A.
Malicki, M.
Szwagrzyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/882330.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Leśny Zakład Doświadczalny. Centrum Edukacji Przyrodniczo-Leśnej w Rogowie
Tematy:
zrodliska
doliny rzeczne
zbiorowiska legowe
lasy legowe
identyfikacja
roslinnosc
kartowanie
Źródło:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej; 2017, 19, 2[51]
1509-1414
Pojawia się w:
Studia i Materiały Centrum Edukacji Przyrodniczo-Leśnej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zbiorowiska roślinne doliny Czerwonej Wody w Parku Narodowym Gór Stołowych
Plant communities of the Czerwona Woda River Valley (Stołowe Mountains National Park)
Autorzy:
Pielech, R.
Malicki, M.
Smoczyk, M.
Jagodziński, A.
Dyderski, M.K.
Horodecki, P.
Wierzcholska, S.
Skorupski, M.
Kamczyc, J.
Kałucka, I.
Hachułka, M.
Gazda, A.
Powiązania:
https://bibliotekanauki.pl/articles/1292420.pdf
Data publikacji:
2018
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
Gory Stolowe
doliny rzeczne
parki narodowe
Park Narodowy Gor Stolowych
dolina Czerwonej Wody
fitosocjologia
zbiorowiska roslinne
roslinnosc rzeczywista
roslinnosc potencjalna
river valley
riparian vegetation
plant communities
Stołowe Mountains
Central Sudetes
Opis:
The Czerwona Woda River is the main watercourse in the Stołowe Mountains National Park and drains the major part of the Stołowe Mts. It was regulated in the past, but its channel has been spontaneously naturalized. Now, managed spruce forests grow along almost the entire length of this small mountain stream. The aims of the present study were to investigate diversity of plant communities connected with the Czerwona Woda stream and to prepare detailed vegetation maps. The results obtained can potentially be a reference for future restoration projects implemented in the Stołowe Mountains National Park. As a result of vegetation mapping, there were distinguished 20 plant communities representative of the current vegetation and 3 communities representative of the potential vegetation. Phytosociological data on the vegetation was documented by making 62 phytosociological relevés. Based on these, 9 forest communities were distinguished, of which 3 were classified into associations, 1 – into alliance, 5 – into secondary forest communities. Furthermore, there were distinguished 14 non-forest communities, of which 10 were classified into associations. Several of the phytosociological classes distinguished have been reported for the first time in the Stołowe Mountains National Park.
Źródło:
Leśne Prace Badawcze; 2018, 79, 2
1732-9442
2082-8926
Pojawia się w:
Leśne Prace Badawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining bulk electrical conductivity of soil from attenuation of electromagnetic pulse
Autorzy:
Malicki, M.A.
Kokot, J.
Skierucha, W.M.
Powiązania:
https://bibliotekanauki.pl/articles/26177.pdf
Data publikacji:
1998
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
electromagnetic pulse
electrical conductivity
soil
soil salinity
Źródło:
International Agrophysics; 1998, 12, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric determination of moisture of cereals grain using time domain reflectometry
Autorzy:
Malicki, M A
Kotlinski, J.
Powiązania:
https://bibliotekanauki.pl/articles/24294.pdf
Data publikacji:
1998
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
moisture
determination
cereal grain
time domain reflectometry
Źródło:
International Agrophysics; 1998, 12, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric determination of moisture of wood using time domain reflectometry
Autorzy:
Malicki, M A
Kotlinski, J.
Powiązania:
https://bibliotekanauki.pl/articles/26096.pdf
Data publikacji:
1998
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
moisture
determination
wood industry
wood
time domain reflectometry
drying process
Źródło:
International Agrophysics; 1998, 12, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reflektometryczny miernik wilgotnosci gleby z pasywnym regulatorem opoznienia impulsu strobujacego
Autorzy:
Malicki, M A
Kotlinski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1630445.pdf
Data publikacji:
1999
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
gleby
woda glebowa
wilgotnosc gleby
pomiary wilgotnosci
mierniki wilgotnosci gleby
technika reflektometryczna
soil
soil water
soil moisture
moisture measurement
soil moisture meter
time domain reflectometry technique
Opis:
W pracy opisano konstrukcję miernika wilgotności gleby z zastosowaniem techniki refie kto metrycznej TDR (Time Domain Reflectometry) z pasywną linią opóźniającą fazę impulsu strobującego. Opóźnienie impulsu jest regulowane mechanicznie. Omawiany układ miernika jest wolny od błędów wywołanych długo- i krótkoterminowym dryftem aktywnych, elektronicznych komponentów aparatu.
Principle of the TDR soil moisture meter with passive strobe delay control is described. The strobe delay is adjusted mechanically. The discussed setup is free of long-and short time drift errors of the meter components
Źródło:
Acta Agrophysica; 1999, 22; 143-149
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methodical aspects of bioreactor modeling in wastewater management
Aspekty metodyczne modelowania bioreaktorów gospodarki ściekowej
Autorzy:
Łagód, G.
Suchorab, Z.
Sobczuk, H.
Malicki, J.
Montusiewicz, A.
Widomski, M.
Powiązania:
https://bibliotekanauki.pl/articles/126426.pdf
Data publikacji:
2010
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
mathematical modeling of bioreactor
wastewater treatment plant
biological sewage treatment
activated sewage sludge
modelowanie matematyczne bioreaktorów
oczyszczalnie ścieków
biologiczne oczyszczanie ścieków
osad czynny
Opis:
Mathematical models are generally created for the needs of the processes control and for the simulations of processes occurring at the really existing objects. For the control of the bioreactors, even for multiparameter models, it is popular to apply both calibration and application at the linear ranges of interactions. If the bioreactor runs the process based on the defined substrate with the application of the previously defined processing factor (for strains, not only species) as an effect only the determined product and the excess biomass are obtained. Also, if the process undergoes in the optimal, constant physical-chemical-biotical conditions, its mathematical description can contain the elements of not only description of transition function but also of mechanisms responsible for the process realization. A kind of bioreactor like a n-step municipal sewage treatment plant with the activated sewage sludge has the unidentified, multicomponent substrate, which differs both in the daily and weekly scale with the multispecies and variable composition. Also, such a bioreactor works in the wide extend of physical-chemical conditions and time-dependent inhibiting factors. Only the product - purified wastewater - is defined by standards and should have the appropriate parameters. It is clear that models with elements describing the process mechanisms have to be complicated and multifactor, thus, the nonlinear models are capable to describe not only the local and global maxima and minima, but also the extreme situations. The models sufficient for processes control and operation should only describe the transition function in the linear interaction of the process important factors (independent variables). That explains the background of the aim of the paper as a methodical assumption presentation of models describing bioreactors like sewage treatment plants with activated sludge together with the elements of the processes running in the particular facilities and calibration of such a model by biomonitoring.
Modele matematyczne mogą być wykorzystywane na potrzeby sterowania procesami w obiektach eksploatowanych, a także do symulacji procesów poza realnie istniejącymi obiektami. Dla sterowania obiektami, takimi jak bioreaktory, praktykowane jest - nawet dla modeli wieloczynnikowych - zarówno ich kalibrowanie, jak i stosowanie w przedziałach oddziaływań liniowych. Jeżeli bioreaktor realizuje proces zdefiniowanego substratu z użyciem zdefiniowanego czynnika procesowego (zdefiniowanego dla szczepu, a nie tylko gatunku) w efekcie uzyskiwany jest ściśle określony produkt i nadmiarowa biomasa czynnika. Ponadto, jeśli proces realizowany jest w optymalnych, ustalonych warunkach fizyczno-chemiczno-biotycznych, matematyczny model procesu może zawierać w sobie elementy opisujące nie tylko funkcje przejścia, lecz również mechanizmy odpowiadające za przebieg procesu. Bioreaktor taki jak n-stopniowa oczyszczalnia ścieków miejskich z osadem czynnym ma niezidentyfikowany, wieloskładnikowy substrat, który jest zmienny w czasie zarówno w skali dobowej, tygodniowej, jak również rocznej. Niezdefiniowany jest również czynnik procesowy o składzie wielogatunkowym i wielorodzajowym, a często nawet wielotypowym. Ponadto bioreaktor taki pracuje w szerokim zakresie warunków fizycznych, chemicznych (różnorodne i różnie przyswajalne źródła C, N, P) oraz różnorodnych i zmiennych w czasie czynników inhibitujących. Jedynie produkt - oczyszczone ścieki - jest ustawowo definiowany i musi spełniać parametry określone w pozwoleniu wodno-prawnym. Jest zatem oczywiste, że modele zawierająceelementy opisujące mechanizmy procesu muszą być rozbudowane i wieloczynnikowe (ponadto nieliniowe), jeśli mają opisywać lokalne oraz globalne maksima i minima, a także sytuacje ekstremalne. Modele przydatne dla sterowania procesami zachodzącymi w urządzeniach oczyszczalni mogą opisywać funkcje przejścia jedynie w liniowych oddziaływaniach ważnych procesowo czynników (zmiennych niezależnych). Celem opracowania jest przedstawienie zasad tworzenia modeli opisujących bioreaktor typu „oczyszczalnia z osadem czynnym” zarówno z wykorzystaniem procesów realizowanych w poszczególnych obiektach, jak i przedstawiających jedynie funkcje przejścia.
Źródło:
Proceedings of ECOpole; 2010, 4, 1; 67-72
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurements of doses from photon beam irradiation and scattered neutrons in an anthropomorphic phantom model of prostate cancer: a comparison between 3DCRT, IMRT and tomotherapy
Autorzy:
Kowalik, A.
Jackowiak, W.
Malicki, J.
Skórska, M.
Adamczyk, M.
Konstanty, E.
Piotrowski, T.
Polaczek-Grelik, K.
Powiązania:
https://bibliotekanauki.pl/articles/146348.pdf
Data publikacji:
2017
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
3DCRT
IMRT
low doses
neutron doses
thermoluminescent detectors (TLD)
tomotherapy
Opis:
The rapid development of new radiotherapy technologies, such as intensity modulated radiotherapy (IMRT) or tomotherapy, has resulted in the capacity to deliver a more homogenous dose in the target. However, the higher doses associated with these techniques are a reason for concern because they may increase the dose outside the target. In the present study, we compared 3DCRT, IMRT and tomotherapy to assess the doses to organs at risk (OARs) resulting from photon beam irradiation and scattered neutrons. Material and methods. The doses to OARs outside the target were measured in an anthropomorphic Alderson phantom using thermoluminescence detectors (TLD 100) 6Li (7.5%) and 7Li (92.5%). The neutron fluence rate [cm–2·s–1] at chosen points inside the phantom was measured with gold foils (0.5 cm diameter, mean surface density of 0.108 g/cm3). Results. The doses [Gy] delivered to the OARs for 3DCRT, IMRT and tomotherapy respectively, were as follows: thyroid gland (0.62 ± 0.001 vs. 2.88 ± 0.004 vs. 0.58 ± 0.003); lung (0.99 ± 0.003 vs. 4.78 ± 0.006 vs. 0.67 ± 0.003); bladder (80.61 ± 0.054 vs. 53.75 ± 0.070 vs. 34.71 ± 0.059); and testes (4.38 ± 0.017 vs. 6.48 ± 0.013 vs. 4.39 ± 0.020). The neutron dose from 20 MV X-ray beam accounted for 0.5% of the therapeutic dose prescribed in the PTV. The further from the field edge the higher the contribution of this secondary radiation dose (from 8% to ~45%). Conclusion. For tomotherapy, all OARs outside the therapeutic field are well-spared. In contrast, IMRT achieved better sparing than 3DCRT only in the bladder. The photoneutron dose from the use of high-energy X-ray beam constituted a notable portion (0.5%) of the therapeutic dose prescribed to the PTV.
Źródło:
Nukleonika; 2017, 62, 1; 29-35
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Socio-economic conditions of innovative forms of apple processing
Ekonomiczno-społeczne uwarunkowania innowacyjnych form przetwórstwa jabłek
Autorzy:
Knapik, W.
Puchala, J.
Malicki, P.
Powiązania:
https://bibliotekanauki.pl/articles/38004.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
socioeconomic condition
food
innovation
apple
fruit processing
consumer acceptance
ecological agriculture
lactic fermentation
Źródło:
Acta Scientiarum Polonorum. Oeconomia; 2015, 14, 4
1644-0757
Pojawia się w:
Acta Scientiarum Polonorum. Oeconomia
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies