Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lin, Jun" wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Experimental study of quartz classification in the enhanced gravity field using Falcon concentrator
Autorzy:
Zhang, Ling
Yang, Lu
Hou, Haochun
Zhao, Yan
Lin, Jun
Zhang, Zeliang
Bu, Caiyun
Zheng, Xinran
Fu, Dong
Powiązania:
https://bibliotekanauki.pl/articles/27323652.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
classification
enhanced gravity field
fine particles
fish-hook
Opis:
The classification and separation of minerals happen in the traditional gravity separation simultaneously. This paper focuses on the classification performance of quartz particles in the enhanced gravity field. The classification efficiency of single quartz particles decreased then increased with the increase of rotational angular velocity, while it decreased with the increase of backwash water pressure. The classification efficiency of -0.5 +0.25mm, -0.25 +0.125mm, -0.125 +0.074mm, -0.074 +0.045mm and -0.045mm quartz was higher than the corresponding narrow size of -0.5mm quartz in general. The “fish-hook” phenomenon appeared in the partition curve of -0.5mm quartz under small/large rotational angular velocity and small backwash water pressure, and the dip point could be found in fine particles region, which indicated that the “fish-hook” was closely related with operating parameters and particle size. A medium rotational angular velocity and larger backwash water pressure could be helpful to avoid the appearance of “fish-hook” in fine particles region and achieve a better classification performance. This investigation is beneficial to understand the regularity of particle migration in the enhanced gravity field.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 175242
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of the Effect of Geometric Parameters of the Fibre Transport Channel in Open-End Rotor Spinning
Symulacja wpływu parametrów geometrycznych kanału transportu włókien w procesach przędzenia bezwrzecionowego i rotorowego
Autorzy:
Lin, Huiting
Akankwasa, Nicholus Tayari
Wang, Jun
Zhang, Chuyang
Powiązania:
https://bibliotekanauki.pl/articles/233463.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
fibre transport channel
airflow
simulation
rotor spinning
bypass channel
kanał transportowy włókien
przepływ powietrza
symulacja
wirowanie
kanał obejściowy
Opis:
The airflow field in a fibre transport channel is crucial as it affects the fibre configuration significantly and, consequently, the yarn properties. Geometric parameters are found to be critical in influencing airflow characteristics. 3D finite volume computationswere adopted to evaluate the effects of geometric parameters of the transport channel on airflow characteristics. A bypass channel for extra air supply into the transport channel was also evaluated. The results reveal that the transport channel inlet area has a more significant impact on the vortices generated at the channel inlet than the transport channel length. Either increasing the transport channel length or decreasing the transport inlet area can reduce the vortices but cannot eliminate them. By adopting a bypass channel, the vortices are reduced significantly and the air velocity at the transport channel inlet, especially in the fibre separation area, is increased.
Pole przepływu powietrza w kanale transportującym włókna ma kluczowe znaczenie, ponieważ wpływa znacząco na konfigurację włókien, a w konsekwencji na właściwości przędzy. Stwierdzono, że parametry geometryczne mają krytyczne znaczenie dla wpływu na charakterystykę przepływu powietrza. Obliczenia objętości 3D zostały przyjęte w celu oceny wpływu parametrów geometrycznych kanału transportowego na charakterystykę przepływu powietrza. Oceniono także kanał obejściowy dla dodatkowego dopływu powietrza do kanału transportowego. Wyniki pokazały, że obszar wlotowy kanału transportowego ma bardziej znaczący wpływ na wiry generowane na wlocie kanału niż długość kanału transportowego. Zwiększenie długości kanału transportowego lub zmniejszenie obszaru wlotu transportowego może zmniejszyć wiry, ale nie może ich wyeliminować. Przyjmując kanał obejściowy, wiry są znacznie zmniejszone, a prędkość powietrza na wlocie kanału transportowego, zwłaszcza w obszarze oddzielania włókien, jest zwiększona.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 2 (134); 52-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on communication emitter identification based on semi-supervised dimensionality reduction in complex electromagnetic environment
Autorzy:
Ge, Wei
Qi, Lin
Tong, Lin
Zhu, Jun
Zhang, Jing
Zhao, Dongyang
Li, Ke
Powiązania:
https://bibliotekanauki.pl/articles/27311449.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
communication emitter identification
feature extraction
dimensionality reduction
VMD
ESDA
variational mode decomposition
exponential semi-supervised discriminant analysis
identyfikacja emitera komunikacyjnego
ekstrakcja cech
redukcja wymiarowości
rozkład w trybie wariacyjnym
analiza dyskryminacyjna wykładnicza półnadzorowana
Opis:
The individual identification of communication emitters is a process of identifying different emitters based on the radio frequency fingerprint features extracted from the received signals. Due to the inherent non-linearity of the emitter power amplifier, the fingerprints provide distinguishing features for emitter identification. In this study, approximate entropy is introduced into variational mode decomposition, whose features performed in each mode which is decomposed from the reconstructed signal are extracted while the local minimum removal method is used to filter out the noise mode to improve SNR. We proposed a semi-supervised dimensionality reduction method named exponential semi-supervised discriminant analysis in order to reduce the high-dimensional feature vectors of the signals, and LightGBM is applied to build a classifier for communication emitter identification. The experimental results show that the method performs better than the state-of-the-art individual communication emitter identification technology for the steady signal data set of radio stations with the same plant, batch and model.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2023, 71, 4; art. no. e145766
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study of dam-break-like tsunami bore impact mechanism on a container model
Autorzy:
Chen, Cheng
Chen, Jun
Lin, Peng
Chen, Chiwei
Chen, Haozhe
Powiązania:
https://bibliotekanauki.pl/articles/260608.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
tsunami bore
dam break
container
Froude number
movement distance
coast slope
Opis:
Tsunami disasters have frequently occurred in recent years. More and more researchers are focusing on this topic. To investi-gate the tsunami bore impact mechanism on a container model, a multi-functional slope-changing tsunami flume is built in this study. To simulate a tsunami bore, a dam-break wave was generated by a free-falling gate in a reservoir. A needle water level gauge and a high-speed camera were used to measure the tsunami wave heights and velocities for different storage water levels in the test flume, and the corresponding Froude numbers of tsunami waves were also calculated. The factors af-fecting the movement distance of the tsunami wave impacting the container model are explored in this experiment, and the results show that the movement distance is positively correlated with the storage water level, and negatively correlated with the container density and the coast slope.
Źródło:
Polish Maritime Research; 2020, 1; 53-59
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and evaluation of a needle tip measurement system based on binocular vision
Autorzy:
Lin, Yuyang
Shi, Yunlai
Zhang, Jun
Wang, Fugang
Sun, Haichao
Powiązania:
https://bibliotekanauki.pl/articles/220501.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
needle tip measurement
binocular vision system
measurement capability analysis
non-contact optical positioning
Opis:
The precise location of the needle tip is critical in robot-assisted needle-based percutaneous interventions. An automatic needle tip measuring system based on binocular vision technology with the advantages of non-contact, excellent accuracy and high stability is designed and evaluated. First the measurement requirements of the prostate intervention robot are introduced. A laser interferometer is used as the reference for measuring the position of the needle tip whose relative position variation is described as the needle tip distance in the time domain. The parameters of the binocular cameras are obtained by Zhang’s calibration method. Then a robust needle tip extraction algorithm is specially designed to detect the pixel coordinates of the needle tip without installing the marked points. Once the binocular cameras have completed the stereo matching, the 3D coordinates of the needle tip are estimated. The measurement capability analysis (MCA) is used to evaluate the performance of the proposed system. The accuracy of the system can be controlled within 0.3621 mm. The agreement analysis is conducted by the Bland-Altman analysis, and the Pearson correlation coefficient is 0.999847. The P/T ratio value is 16.42% in the repeatability analysis. The results indicate that the accuracy and stability of the binocular vision needle tip measuring system are adequate to meet the requirement for the needle tip measurement in percutaneous interventions.
Źródło:
Metrology and Measurement Systems; 2020, 27, 3; 495-512
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the linear viscoelastic rheological properties of rejuvenated asphalt mastic based on the discrete element method
Autorzy:
Lin, Mei
Lei, Yu
Li, Ping
Shuai, Jun
Wang, Zhaoli
Powiązania:
https://bibliotekanauki.pl/articles/27312105.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
model konstytutywny
metoda elementów dyskretnych
mastyks asfaltowy odnowiony
właściwości reologiczne
constitutive model
discrete element method
rejuvenated asphalt mastic
rheological characteristics
Opis:
The rheological property of asphalt is an important factor affecting the pavement performance of asphalt binder, and the fundamental reason for the change of asphalt rheological property is the strong evolution of asphalt material meso structure. However, the internal mechanism of rejuvenated asphalt mastic system is complex and its rules are difficult to grasp. Aiming to study the relationship between meso mechanical parameters and rheological parameters of rejuvenated asphalt mastic, the meso structure model of rejuvenated asphalt mastic was established and improved based on the discrete element method. Moreover, the meso parameters of the model were obtained by the objective function method, and then the influences of various factors were studied to construct the mathematical constitutive model of rheological parameter modulus and meso mechanical parameters. Combing with the reliability of the improved Burgers model was verified based on the rheological test results of rejuvenated asphalt mastic. In addition, the virtual test of dynamic shear rheological dynamic frequency scanning was carried out on the asphalt mastic sample by particle flow software. By adjusting the mesomechanical parameters, the simulation results (complex shear modulus and phase angle) were consistent with the test results. This study clarified the relationship between mesomechanics and macro performance, and this model could be used to obtain the complex shear modulus of rejuvenated asphalt mastic under different types, filler-asphalt ratio and external force environments by adjusting particle flow, wall boundary and other conditions, which can greatly save the workload for the later research and provide a theoretical basis for production experiments.
Źródło:
Archives of Civil Engineering; 2023, 69, 2; 399--416
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Local Characterisation and Detection of Woven Fabric Texture Based on a Sparse Dictionary
Autorzy:
Wu, Ying
Wang, Ren
Lou, Lin
Wang, Lali
Wang, Jun
Powiązania:
https://bibliotekanauki.pl/articles/2172000.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
fabric texture representation
sparse representation
weave repeat
defect detection
dictionary learning
Opis:
To achieve enhanced accuracy of fabric representation and defect detection, an innovative approach using a sparse dictionary with small patches was used for fabric texture characterisation. The effectiveness of the algorithm proposed was tested through comprehensive characterisation by studying eight weave patterns: plain, twill, weft satin, warp satin, basket, honeycomb, compound twill, and diamond twill and detecting fabric defects. Firstly, the main parameters such as dictionary size, patch size, and cardinality T were optimised, and then 40 defect-free fabric samples were characterised by the algorithm proposed. Subsequently, the Impact of the weave pattern was investigated based on the representation result and texture structure. Finally, defective fabrics were detected. The algorithm proposed is an alternative simple and scalable method to characterise fabric texture and detect textile defects in a single step without extracting features or prior information.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 3 (151); 33--40
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the Performance Optimization of Turbulent Self-Noise Suppression and Sound Transmission of Acoustic Windows Made from Functionally Graded Material
Autorzy:
Li, Bing
Zhou, Fu-Lin
Fan, Jun
Wang, Bin
Tan, Liwen
Powiązania:
https://bibliotekanauki.pl/articles/31339793.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
functionally graded material
acoustic window
turbulent self-noise
sound transmission loss
optimization
Opis:
For a simplified sonar dome model, an optimization method for internal gradients of functionally graded material (FGM) acoustic windows is proposed in this paper. This method can be used to design optimized FGM acoustic windows with better turbulent self-noise suppression and sound transmission performances. A theoretical model of FGM acoustic windows to evaluate the reduction of self-noise caused by the turbulent boundary layer (TBL) pulsating pressure and the sound transmission loss (STL) is derived through the double Fourier transform and the wavenumber frequency spectrum analysis, respectively, based on the transfer matrix idea and the classical elastic theory. The accuracy of the theory is verified by the finite element results of COMSOL Multiphysics. Utilizing the genetic algorithm (GA) and taking the monotonic gradient as the constraint condition, the internal gradient optimization method of FGM acoustic windows obtains the optimization variables in the Bernstein polynomial when the optimization objective is minimized by iterating the optimization variables in the deviation function represented by the Bernstein polynomial that is introduced in the gradient function. The STL, the turbulent self-noise reduction or a weighting function of the STL and turbulent self-noise reduction of FGM acoustic windows is chosen as the optimization objective. The optimization calculation of the sound transmission or turbulent self-noise suppression performances is carried out for the FRP-rubber FGM (FGM with fiber reinforced plastic (FRP) as the substrate material and rubber as the top material) acoustic window. The optimized results show that both the sound transmission and turbulent self-noise suppression performance are effectively improved, which verifies the effectiveness of the optimization method. Finally, the mechanism of the sound transmission and self-noise suppression characteristics before and after optimization are explained and analyzed based on the equivalent model of graded materials. The research results of this paper provide a reference value for the future design of FGM acoustic windows for sonar domes.
Źródło:
Archives of Acoustics; 2023, 48, 4; 475-495
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical trapping forces of focused circular partially coherent beams on Rayleigh particles
Autorzy:
Yu, Chaoqun
Chen, Fuchang
Zeng, Jun
Huang, Cheng
He, Zhimin
Lin, Huichuan
Zhang, Yongtao
Chen, Ziyang
Pu, Jixiong
Powiązania:
https://bibliotekanauki.pl/articles/2172861.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tight focusing
radially polarized
circular partially coherent
spherical aberration
optical trapping force
Opis:
The optical trapping forces of tightly-focused radially polarized circular partially coherent beams on Rayleigh particles are theoretically investigated. Numerical calculations are performed to study the optical trapping forces on Rayleigh particles for different initial coherent length of the incident circular partially coherent beams. The results show that the magnitude of the gradient force decreases with the reduction of the initial coherent length of the focused radially polarized circular partially coherent beams, while the balanced position (i.e., the position where the optical trapping forces becomes zero) stays constant. Moreover, the focused spot gradually elongates along the optical axis with the reduction of the initial coherent length, and the axial gradient force on Rayleigh particles also decreases gradually with the reduction of the intensity gradient in axial direction. As there exists an spherical aberrant in the focusing optical system, the focal spot in the direction of the optical axis becomes trumpet-shaped, and the optical trapping forces on Rayleigh particles change as well.
Źródło:
Optica Applicata; 2022, 52, 4; 575--583
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies