Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lewandowski, S." wg kryterium: Autor


Tytuł:
Study of Excimer Laser Irradiation Effects on Properties of Crystalline YBaCuO Thin Films
Autorzy:
Abal'oshev, A.
Abal'osheva, I.
Lewandowski, S. J.
van der Beek, C. J.
Konczykowski, M.
Rizza, G.
Barbanera, S.
Powiązania:
https://bibliotekanauki.pl/articles/2038396.pdf
Data publikacji:
2004-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.25.Fy
74.72.Bk
74.78.Bz
81.15.Fg
Opis:
The influence of UV laser irradiation on the physical properties of epitaxial YBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ thin (<1μm) films fabricated by laser ablation was studied. The samples were irradiated by pulsed excimer laser beam at different incident energy densities E$\text{}_{ir}$≤130 mJ/cm$\text{}^{2}$, i.e. 2-3 times below the ablation threshold of YBaCuO. The analysis of the sample cross-section using transmission electron microscope shows that such irradiation forms a disordered layer on the top of the crystalline film. Sample surface amorphization was observed also by atomic force microscope. Due to strong UV irradiation absorption in YBaCuO this surface layer acts like a protective cover for the sample interior. Only a small reduction of superconducting critical temperature T$\text{}_{c}$ was observed. Both transport measurements in normal state and magneto-optical studies in superconducting state indicate that between the disordered layer and the bottom non-modified part of the film there exists a wide transitional region with reduced carrier concentration.
Źródło:
Acta Physica Polonica A; 2004, 106, 5; 681-685
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamics of the Josephson Multi-Junction Systems with Junctions Characterized by Non-Sinusoidal Current - Phase Relationship
Autorzy:
Abal'osheva, I. S.
Lewandowski, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/2041445.pdf
Data publikacji:
2004-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.50.+r
85.25.Am
85.25.Dq
Opis:
It is shown that the inclusion of junctions characterized by non-sinusoidal current - phase relationship in the systems composed of multiple Josephson junctions - results in the appearance of additional system phase states. Numerical simulations and stability considerations confirm that these phase states can be realized in practice. Moreover, spontaneous formation of the grain boundary junctions in high-T$\text{}_{c}$ superconductors with non-trivial current-phase relations due to the d-wave symmetry of the order parameter is probable. Switching between the phase states of multiple grain boundary junction systems can lead to additional 1/f noise in high-T$\text{}_{c}$ superconductors.
Źródło:
Acta Physica Polonica A; 2004, 106, 5; 687-691
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-criterion Optimisation of Energy Generation in Multi-unit Hydroelectric Power Plants
Wielokryterialna optymalizacja wytwarzania energii w wieloblokowych elektrowniach wodnych
Autorzy:
Adamkowski, A.
Lewandowski, M.
Lewandowski, S.
Powiązania:
https://bibliotekanauki.pl/articles/952905.pdf
Data publikacji:
2018
Wydawca:
ENERGA
Tematy:
water power
optimisation of hydroelectric power plant operation
optimisation studies on hydro units
energetyka wodna
optymalizacja pracy elektrowni wodnej
badania optymalizacyjne hydrozespołów
Opis:
Maintaining variable operating conditions of water barrage, imposed upon the owners of hydroelectric power plants by various acts and administrative decisions, requires proper adjustment of power plant water discharge by variable opening of turbine control components. This changes the generated power and thus shifts the hydro units operating point, which alters the power generation efficiency. In power plants equipped with two or more hydro units, it is possible to configure operation of hydro units and load each of them with such active power as to obtain the best possible electrical energy generation efficiency with the available hydroelectric potential of the barrage. In this paper, the method of optimising an example multi-unit hydroelectric power plant using various criteria was described, i.e. the efficiency criterion or the revenue criterion. Particular attention was paid to the maximisation of generation efficiency to ensure the maximum use of the inflow and head available at the barrage under the restrictions due to current conditions.
Dotrzymanie zmiennych warunków użytkowania stopnia wodnego, narzuconych właścicielom elektrowni wodnych w różnego rodzaju aktach i decyzjach administracyjnych, wymaga odpowiedniego dostosowania przełyku elektrowni poprzez zmianę stopnia otwarcia elementów regulacyjnych turbin. Skutkuje to zmianą generowanej mocy i tym samym przesunięciem punktu pracy hydrozespołów powodującym zmianę sprawności wytwarzania energii. W elektrowniach wyposażonych w dwa lub więcej hydrozespołów można tak dobrać konfigurację pracujących hydrozespołów i każdy z nich obciążyć taką mocą czynną, aby uzyskać najwyższą możliwą sprawność wytwarzania energii elektrycznej z dostępnego potencjału hydroenergetycznego stopnia wodnego. W artykule opisano sposób optymalizacji przykładowej wieloblokowej elektrowni wodnej z wykorzystaniem różnych kryteriów, tj. kryterium sprawnościowego czy też przychodowego. Szczególną uwagę poświęcono zagadnieniu maksymalizacji sprawności wytwarzania gwarantującej maksymalne wykorzystanie dopływu i spadu dostępnego na stopniu przy narzuconych ograniczeniach wynikających z aktualnych uwarunkowań.
Źródło:
Acta Energetica; 2018, 1; 66-71
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Transport and Magnetic Properties of La$\text{}_{2}\text{}_{/}\text{}_{3}$ Pb$\text{}_{1}\text{}_{/}\text{}_{3}$ MnO$\text{}_{3}$ Thin Films
Autorzy:
Baran, M.
Berkowski, M.
Fink-Finowicki, J.
Lewandowski, S. J.
Szymczak, H.
Szymczak, R.
Khartchev, S. I.
Medvedev, Yu. V.
Powiązania:
https://bibliotekanauki.pl/articles/2037109.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.-m
72.15.Gd
75.70.Pa
Opis:
The magnetic and transport properties of epitaxial La$\text{}_{2}\text{}_{/}\text{}_{3}$ Pb$\text{}_{1}\text{}_{/}\text{}_{3}$ CuO$\text{}_{3}$ thin films deposited on SrLaGaO$\text{}_{4}$ substrate using dc magnetron sputtering technique are reported. The giant magnetoresistance effect (of about 50% at magnetic field of 1 T) was observed near the Curie temperature. Several mechanisms responsible for temperature dependence of resistivity are discussed. The effect of annealing was studied. It shifted the Curie temperature to the lower value, probably, because of the loss of oxygen.
Źródło:
Acta Physica Polonica A; 2004, 105, 1-2; 115-120
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Glacitektonika wybranych obszarów Polski
Glaciotectonics of the selected regions of Poland
Autorzy:
Ber, A.
Dobracki, R.
Lisicki, S.
Morawski, W.
Badura, J.
Krzyszkowski, D.
Przybylski, B.
Urbański, K.
Kasprzak, L.
Ruszczyńska-Szenajch, H.
Wysota, W.
Turkowska, K.
Gardziel, Z.
Harasimiuk, M.
Lewandowski, J
Wójcik, A.
Powiązania:
https://bibliotekanauki.pl/articles/2063249.pdf
Data publikacji:
2004
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
glacitektonika
wybrane obszary
Polska
Polska
glaciotectonics
selected regions
Opis:
Niniejsze zbiorowe opracowanie powstało na podstawie szczegółowych (SMGP w skali 1: 50 000) i przeglądowych materiałów kartograficznych, publikowanych i archiwalnych opracowań autorskich oraz na podstawie Gacitektonicznej mapy Polski w skali 1:1 000 000, i stanowi swoisty, regionalny komentarz tekstowy do tej mapy. W podziale Polski na obszary: północno-zachodni, północny, północno-wschodni, zachodni i środkowozachodni, środkowy i środkowowschodni, południowo-wschodni oraz południowy przedstawiono opisy zaburzonych glacitektonicznie form i osadów powierzchniowych i kopalnych. Występowanie zaburzeń glacitektonicznych w Polsce związane jest przede wszystkim z zasięgami młodszych zlodowaceń i z miąższością ulegającego deformacjom podłoża. Formy i osady były zaburzane albo przez pionowe i poziome naciski aktywnego (transgredującego) lądolodu, albo przez nacisk pionowy na podłoże stagnujących mas lodowych. Prace nad uzupełnianiem zawartych w opracowaniu opisów wybranych obszarów Polski oraz treści Glacitektonicznej mapy Polski w skali 1:1 000 000 będą kontynuowane zarówno przez wnoszenie nowych danych, jak też przez rozszerzanie i uszczegółowianie legendy o nowe wydzielenia i oznaczenia wiekowe.
The presented complete edition was prepared on the base results of the detailed (Detailed Geological Map of Poland in scale 1:50 000) and review geological mapping, published and archival data, as well as an explanations and symbols elaborated for Glaciotectonic Map of Poland in scale 1:1 000 000. Therefore this elaboration, presenting the regional description of the glaciotectonic features within selected regions of Poland, compose specific textural explanations for this map. Within the territory of Poland subdivided on following regions: North-Western, North, North-Eastern, Western, Middle-Western, Middle, Middle-Eastern, Southern, South-Eastern, glaciotectonicly disturbed landforms and sediments either expressed in recent relief or buried (stated in borings or in exposures) were described. Distribution of glaciotectonic features over the territory of Poland is related primarily to the presence younger glaciations and thickneses of the deformable substratum. Generally, the landforms and sediments were deformed by active ice sheets through the horizontal and vertical thrusts of the ice masses, as well as by vertical stress of the stagnant ice masses. The supplementary works under in details description of the glaciotectonic features in particular regions of Poland will be continued, as well as completed the contents of the Glaciotectonic Map of Poland in scale 1:1 000 000.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2004, 408; 73-125
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena czystości bakteriologicznej nakryć stołowych w zakładach żywienia zbiorowego miasta Raciborza w latach 1966-1969
Ocenka bakteriologiceskoi cistoty stolovyh priborov v zavedenijah obszestvennogo piganija goroda racibozha
Bacteriological appraisal of table-wares in public eating houses of the town of Raciborz in 1966-1969
Autorzy:
Bluszcz, G.
Lewandowski, S.
Powiązania:
https://bibliotekanauki.pl/articles/872391.pdf
Data publikacji:
1970
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Źródło:
Roczniki Państwowego Zakładu Higieny; 1970, 21, 6
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selection of Optimal Formation Parameters of Polypropylene Fibrillated Fibres Designed for Concrete Reinforcement
Zastosowanie metod statystycznych do selekcji optymalnych parametrów formowania fibrylizowanych włókien polipropylenowych przeznaczonych do zbrojenia betonu
Autorzy:
Broda, J.
Przybyło, S.
Lewandowski, S.
Powiązania:
https://bibliotekanauki.pl/articles/234272.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
polipropylen
fibrylizowane włókna polipropylenowe
parametry mechaniczne
analiza statystyczna
parametry formacji
polypropylene
fibrillated fibres
formation parameters
mechanical parameters
statistical analysis
Opis:
For the reinforcement of concrete, fibrillated polypropylene fibres are used. The effectiveness of the reinforcement depends on the fibre geometry as well the mechanical parameters. The production of fibrillated fibres is a multistage process in which formation conditions exert a great influence on the final properties of the fibres. Fibrillated polypropylene fibres were produced by different formation parameters. Mechanical parameters of the fibres: tenacity, elongation at break, and Young modulus were measured. Results of the measurements were analysed by statistical methods. On the basis of the analysis performed, beneficial formation parameters were established.
W celu wzmocnienia betonu zostały użyte fibrylizowane włókna polipropylenowe. Efektywność wzmocnienia betonu jest uzależniona od geometrii włókien, jak i ich mechanicznych parametrów. Produkcja fibrylizowanych włókien jest wieloetapowym procesem, w którym warunki formowania wywierają duży wpływ na końcowe właściwości włókien. Fibrylizowane włókna polipropylenowe zostały wyprodukowane przy różnych parametrach ich formowania. Następnie wyznaczono właściwości mechaniczne tych włókien: wytrzymałość właściwą na rozciąganie, wydłużenie przy zerwaniu i moduł Younga. Wyniki pomiarów zostały poddane analizie statystycznymi metodami. Na podstawie przeprowadzonej analizy wyselekcjonowano korzystne parametry formowania.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 6A (95); 69-74
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Bragg and Polarimetric Optical Fiber Sensors for Stress Monitoring in Composite Materials
Autorzy:
Domanski, A.
Lesiak, P.
Milenko, K.
Budaszewski, D.
Chychlowski, M.
Ertman, S.
Tefelska, M.
Wolinski, T.
Jedrzejewski, K.
Lewandowski, L.
Jasiewicz, W.
Helsztynski, J.
Boczkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/1795792.pdf
Data publikacji:
2009-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
42.81.Gs
42.81.Pa
62.23.Pq
Opis:
Composite structures are made of two or more components with significantly different physical or chemical properties and they remain separate and distinct in a macroscopic level within the finished structure. This feature allows for introducing optical fiber sensors into the composite material. These sensors can demonstrate stress distribution inside tested material influenced by external tensions. Two types of the optical fiber sensors are used as the 3D structure. One of them is based on application of fiber Bragg grating inside the core of the fiber. Longitudinal stress changes parameters of the Bragg grating and simultaneously, spectral characteristics of the light transmitted through the fiber. The second one is based on application of highly birefringent fibers which, under external stress, introduce polarization changes of the output light.
Źródło:
Acta Physica Polonica A; 2009, 116, 3; 294-297
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of stress and strain in specimens with rectangular cross-section subjected to torsion and bending with torsion
Autorzy:
Faszynka, S.
Lewandowski, J.
Rozumek, D.
Powiązania:
https://bibliotekanauki.pl/articles/386781.pdf
Data publikacji:
2016
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
numerical method
fatigue crack growth
torsion
bending with torsion
metody numeryczne
pękanie zmęczeniowe
skręcanie
zginanie ze skręcaniem
Opis:
The paper presents an analysis of the state of stress and crack tip opening displacement (strain) in specimens with rectangular cross-section subjected to torsion and combined bending with torsion. The specimens were made of the EN AW-2017A aluminium alloy. The specimens had an external unilateral notch, which was 2 mm deep and its radius was 22.5 mm. The tests were performed at constant moment amplitude MT=MBT= 15.84 N.m and under stress ratio R= -1. The exemplary results of numerical computations being obtained by using the FRANC3D software were shown in the form of stress and crack tip opening displacement (CTOD) maps. The paper presents the differences of fatigue cracks growth under torsion and bending with torsion being derived by using the FRANC3D software.
Źródło:
Acta Mechanica et Automatica; 2016, 10, 1; 5-11
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wartosc uzytkowa plonu nasion rzepaku jako dodatkowe kryterium oceny wartosci gospodarczej odmian
Autorzy:
Heimann, S
Lewandowski, A.
Luczkiewicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/834071.pdf
Data publikacji:
2000
Wydawca:
Instytut Hodowli i Aklimatyzacji Roślin
Tematy:
wartosc gospodarcza
nasiona
wartosc uzytkowa
plony
rzepak ozimy
odmiany roslin
agronomic value
seed
utility value
yield
winter rape
plant cultivar
Źródło:
Rośliny Oleiste - Oilseed Crops; 2000, 21, 2; 649-652
1233-8273
Pojawia się w:
Rośliny Oleiste - Oilseed Crops
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Complementarity of Wind and Photovoltaic Power Generation in Conditions Similar to Polish
Współzmienność generacji energii elektrycznej w elektrowniach wiatrowych i fotowoltaicznych w warunkach zbliżonych do polskich
Autorzy:
Hyrzyński, R.
Karcz, M.
Lemański, M.
Lewandowski, K.
Nojek, S.
Powiązania:
https://bibliotekanauki.pl/articles/397332.pdf
Data publikacji:
2013
Wydawca:
ENERGA
Tematy:
energy production correlation
RES
energy mix
korelacja wytwarzania OZE
energetyka odnawialna
mix wytwarzania
Opis:
In the paper an estimation of the correlation between power generation from wind and photovoltaic farms distributed over a large area has been presented. The climatic and morphological conditions for the considered area are similar to the Polish conditions. The initial analysis of data provided by distribution system operators indicates that a negative correlation between wind and PV energy generation exists when a longer period of averaging is assumed. Additionally, the maximum value of generated power has never reached the level of installed capacity. Considering the system, where a significant number of wind and photovoltaic farms are installed, an assumption that total generation sources capacity is achievable can lead either to grid curtailments or to grid development overinvestments.
Streszczenie W artykule podjęto próbę oceny współzależności wytwarzania energii elektrycznej w elektrowniach wiatrowych oraz słonecznych, rozproszonych na znacznym obszarze, dla których warunki morfologiczne i klimatyczne można uznać za zbliżone do warunków polskich. Wstępna analiza danych pochodzących od operatorów systemów elektroenergetycznych wskazuje na występowanie istotnej negatywnej korelacji pomiędzy oboma sposobami generacji energii elektrycznej dla dłuższych przedziałów uśredniania. Dodatkowo na analizowanym obszarze maksymalna moc generowana zarówno przez farmy wiatrowe, jak i w szczególności przez elektrownie fotowoltaiczne, nigdy nie uzyskuje wartości mocy zainstalowanej. W systemie, w którym zainstalowana jest znaczna liczba farm wiatrowych i fotowoltaicznych, rezerwowanie pełnej mocy zainstalowanej wszystkich źródeł wytwórczych jako faktycznie dysponowanej może powodować występowanie ograniczeń sieciowych oraz wymuszanie zbędnych inwestycji w rozwój infrastruktury elektroenergetycznej.
Źródło:
Acta Energetica; 2013, 4; 14-26
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekoturystyka "zieloną" ścieżką do Europy
Ecotourism - the green way to Europe
Autorzy:
Kulczyk, S.
Lewandowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/87044.pdf
Data publikacji:
2004
Wydawca:
Polska Asocjacja Ekologii Krajobrazu
Tematy:
Polska
zasoby przyrodnicze
ekoturystyka
promocja
Źródło:
Problemy Ekologii Krajobrazu; 2004, 13
1899-3850
Pojawia się w:
Problemy Ekologii Krajobrazu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel analytic-numerical model of free convection: with leading edge considered
Autorzy:
Leble, S.
Lewandowski, W. M.
Powiązania:
https://bibliotekanauki.pl/articles/1954434.pdf
Data publikacji:
2022-02-01
Wydawca:
Politechnika Gdańska
Tematy:
Navier-Stokes equations
Fourier-Kirchhoff equations
free convection
heat transfer
isothermal surface
boundary layer
vertical plate
leading edge
Równania Naviera-Stokesa
równanie Fouriera-Kirchhoffa
przenikanie ciepła
izoterma powierzchni
warstwa graniczna
płyty pionowe
Opis:
A novel solution of the free convection boundary problem is represent ed in analytical form for velocity and temperature for an isothermal vertical plate, as an example. These fields are built as a Taylor Series in the x coordinate with coefficients as functions of the vertical coordinate (y). We restrict ourselves by cubic approximation for both functions. The basic Navier-Stokes and Fourier-Kirchhoff equations and boundary conditions give links between coefficients and connected with free convection heat transfer phenomen on which define the analytical form of the solution as a function of the Grashof number only. In t he solution the non zero velocity of a fluid flow through a leading edge of the plate is take n into account. The solution in the form of velocity and temperature profiles is numerically evaluated and illustrated for air.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2014, 18, 2; 167--185
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On free convection heat transfer from vertical plate - proposition of a new model
Autorzy:
Leble, S.
Lewandowski, W. M.
Powiązania:
https://bibliotekanauki.pl/articles/1938587.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska
Tematy:
Navier-Stokes equations
Fourier-Kirchhoff equation
free convective heat transfer
analytical solution
sothermal surface
boundary layer
vertical plate
Opis:
The free convection heat transfer from an isothermal vertical plate in open space is investigated theoretically. In contrast to conventional approaches we use neither boundary layer nor self-similarity concepts. We base on expansion of the fields of velocity and temperature in a Taylor Series in x coordinate with coefficients being functions of the vertical coordinate (y). In the minimal version of the theory we restrict ourselves by cubic approximation for both functions. The Navier-Stokes and Fourier-Kirchhoff equations that describe the phenomenon give links between coefficient functions of y that after exclusion leads to the ordinary differential equation of forth order (of the Mittag-Leffleur type). Such construction implies four boundary conditions for a solution of this equation while the links between the coefficients need two extra conditions. All the conditions are chosen on the basis of the experience usual for free convection. The choice allows us to express all the theory parameters as functions of the Rayleigh number and the temperature difference. To support the conformity of the theory we derive the Nusselt-Rayleigh numbers relation that has the traditional form. The solution in the form of velocity and temperature profiles is evaluated and illustrated for air by examples of plots of data.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2016, 20, 2; 249-265
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies